Academic literature on the topic 'Biomineralized Crystal'

Biomineralized tissues are widespread in animals. They are essential elements in skeletons and in statocysts. The function of both can only be understood with respect to gravitational force, which has always been present. Therefore, it is not astonishing to identify microgravity as a factor influencing biomineralization, normally resulting in the reduction of biomineralized materials. All known biominerals are composite materials, in which the organic matrix and the inorganic materials, organized in crystals, interact. If, during remodeling and turnover processes under microgravity, a defective organization of these crystals occurs, a reduction in biomineralized materials could be the result. To understand the influence of microgravity on the formation of biocrystals, we studied the shell-building process of the snail Biomphalaria glabrataas a model system. We show that, under microgravity (space shuttle flights STS-89 and STS-90), shell material is built in a regular way in both adult snails and snail embryos during the beginning of shell development. Microgravity does not influence crystal formation. Because gravity has constantly influenced evolution, the organization of biominerals with densities near 3 must have gained independence from gravitational forces, possibly early in evolution.

Skeletal parts and teeth of marine organisms, avian eggshells, trilobite and isopod eyes, and many more biomineralized tissues consist of bio-calcite or bio-aragonite crystals. We explore the nano- to micro-scale architectures of these materials by electron backscatter diffraction (EBSD) and complementary techniques. In contrast to their inorganic cousins the biogenic "crystals" are hybrid composites with small amounts of organic matrix controlling morphogenesis and critically improving mechanical performance or other functions. For the biominerals meso-crystal-like structures are ubiquitous, consisting of co-oriented nano-blocks with a mosaic-spread of a few degrees, depending on the organism and on the size of the mesocrystal entity[1, 2, 3]. The nano-mosaic can be attributed to growth by nano-particle accretion from an amorphous or gel-like precursor, where relics of organic matrix cause misorientations between the crystallized nano-blocks. Recently we were able to reproduce this feature in gel-grown calcite [Nindiyasari et al., Crystal Growth and Design, in press]. The mesocrystal-co-orientation spreads on to the micro- and even millimeter-scale, frequently with a fractal nature of co-oriented hierarchical units [Maier et al., Acta Biomaterialia, accepted for publication]. The hierarchically structured morphology of the composite crystal or polycrystal is always directed by organic matrix membranes. Sea urchin teeth show a multiplex composite crystal architecture, where different subunits of engineered shapes, Mg-contents, and small misalignments are essential prerequisites for self-sharpening [1]. The figure shows an EBSD map of dendritic interdigitating calcite crystals in an avian egg shell (color coding for crystal orientation) with an misorientation profile along the grey line.

Mineralized collagen is the basic unit in hierarchically organized natural bone with different structures. Polyacrylic acid (PAA) and periodic fluid shear stress (FSS) are the most common chemical and physical means to induce intrafibrillar mineralization. In the present study, non-mineralized collagen, extrafibrillar mineralized (EM) collagen, intrafibrillar mineralized (IM) collagen, and hierarchical intrafibrillar mineralized (HIM) collagen induced by PAA and FSS were prepared, respectively. The physical and chemical properties of these mineralized collagens with different microstructures were systematically investigated afterwards. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that mineralized collagen with different microstructures was prepared successfully. The pore density of the mineralized collagen scaffold is higher under the action of periodic FSS. Fourier transform infrared spectroscopy (FTIR) analysis showed the formation of the hydroxyapatite (HA) crystal. A significant improvement in the pore density, hydrophilicity, enzymatic stability, and thermal stability of the mineralized collagen indicated that the IM collagen under the action of periodic FSS was beneficial for maintaining collagen activity. HIM collagen fibers, which are prepared under the co-action of periodic FSS and sodium tripolyphosphate (TPP), may pave the way for new bone substitute material applications.

Molluscan shells are a classic model system to study formation–structure–function relationships in biological materials and the process of biomineralized tissue morphogenesis. Typically, each shell consists of a number of highly mineralized ultrastructures, each characterized by a specific 3D mineral–organic architecture. Surprisingly, in some cases, despite the lack of a mutual biochemical toolkit for biomineralization or evidence of homology, shells from different independently evolved species contain similar ultrastructural motifs. In the present study, using a recently developed physical framework, which is based on an analogy to the process of directional solidification and simulated by phase-field modeling, we compare the process of ultrastructural morphogenesis of shells from 3 major molluscan classes: A bivalve Unio pictorum, a cephalopod Nautilus pompilius, and a gastropod Haliotis asinina. We demonstrate that the fabrication of these tissues is guided by the organisms by regulating the chemical and physical boundary conditions that control the growth kinetics of the mineral phase. This biomineralization concept is postulated to act as an architectural constraint on the evolution of molluscan shells by defining a morphospace of possible shell ultrastructures that is bounded by the thermodynamics and kinetics of crystal growth.

Abstract Calcium carbonate (CaCO3) and particularly its stable phase, calcite, is of great geological significance in the deep carbon cycle since CaCO3 from biomineralized shells and corals form sedimentary rocks. Calcite also attracts attention in medical science and pharmacy as a primary or intermediate component in biomaterials because it possesses excellent biocompatibility along with suitable physicochemical properties. Calcite blocks have already been used during surgical procedures as a bone substitute for reconstructing bone defects formed by diseases and injury. When producing CaCO3 biomaterials and bioceramics, in particular, in vivo control of the size and polymorphic nature of CaCO3 is required. In this study, we investigated the effects of PO4 on calcite formation during the phase conversion of calcium sulfate anhydrate (CaSO4, CSA), which is sometimes used as a starting material for bone substitutes because of its suitable setting ability. CSA powder was immersed in 2 mol/L Na2CO3 solution containing a range of PO4 concentrations (0–60 mmol/L) at 40 °C for 3 days. The treated samples were investigated by X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray fluorescence spectroscopy, and thermal analysis. In addition, the fine structures of the treated samples were observed by field-emission scanning electron microscopy, and the specific surface area was measured. We found that PO4, which is universally present in vivo, can modulate the calcite crystal size during calcite formation. A fluorescence study and calcite crystal growth experiments indicated that PO4 adsorbs tightly onto the surface of calcite, inhibiting crystal growth. In the presence of high PO4 concentrations, vaterite is formed along with calcite, and the appearance and stability of the CaCO3 polymorphs can be controlled by adjusting the PO4 concentration. These findings have implications for medical science and pharmacology, along with mineralogy and geochemistry.

Dicalcium phosphate dihydrate (DCPD) is one of the mineral phases indicated as possible precursors of biological apatites and it is widely employed in the preparation of calcium phosphate bone cements. Herein, we investigated the possibility to functionalize DCPD with aspartic acid (ASP) and poly-aspartic acid (PASP), as models of the acidic macromolecules of biomineralized tissues, and studied their influence on DCPD hydrolysis. To this aim, the synthesis of DCPD was performed in aqueous solution in the presence of increasing concentrations of PASP and ASP, whereas the hydrolysis reaction was carried out in physiological solution up to three days. The results indicate that it is possible to prepare DCPD functionalized with PASP up to a polyelectrolyte content of about 2.3 wt%. The increase of PASP content induces crystal aggregation, reduction of the yield of the reaction and of the thermal stability of the synthesized DCPD. Moreover, DCPD samples functionalized with PASP display a slower hydrolysis than pure DCPD. On the other hand, in the explored range of concentrations (up to 10 mM) ASP is not incorporated into DCPD and does not influence its crystallization nor its hydrolysis. At variance, when present in the hydrolysis solution, ASP, and even more PASP, delays the conversion into the more stable phases, octacalcium phosphate and/or hydroxyapatite. The greater influence of PASP on the synthesis and hydrolysis of DCPD can be ascribed to the cooperative action of the carboxylate groups and to its good fit with DCPD structure.

In this study, we cloned a novel matrix protein, cysrichin, with 16.03% homology and a similar protein structure to the coral biomineralized protein galaxin. Tissue expression analysis showed that cysrichin was mainly expressed in mantle and gill tissues. In situ hybridization indicated that cysrichin mRNA was detected in the entire epithelium region of mantle tissue. RNAi analysis and shell notching experiment confirmed that cysrichin participates in the prismatic layer and nacreous layer formation of the shell. An in vitro crystallization experiment showed that the cysrichin protein induced lotus-shaped and round-shaped crystals, which were identified as vaterite crystals. These results may provide new clues for understanding the formation of vaterite in freshwater shellfish.

Abstract Early diagenetic changes occurring in aragonite coral skeletons were characterized at the micro- and ultra-structural scales in living and fossil scleractinian colonies, the latter of Pleistocene age. The skeleton of scleractinian corals, like all biomineralized structures, is a composite material formed by the intimate association of inorganic aragonite crystallites and organic matrices. In addition to its organo-mineral duality, the scleractinian skeleton is formed by the three-dimensional arrangement of two clearly distinct basic structural features, the centers of calcification and the fibers. The latter are typically characterized by a transverse micron-scale zonation revealing their incremental growth process. The size, geometry and three-dimensional arrangement of calcification centers and fibers are taxon-specific. The earliest diagenetic modifications of these skeletons have been clearly recognized in the older parts of living colonies. The first steps of diagenesis therefore take place only a few years after the skeleton had been secreted by the living polyps, and in the same environmental conditions. Comparisons with the uppermost living parts of the coral colonies clearly show that these first diagenetic changes are driven by the biological ultrastructural characteristics of these skeletons and are conditioned by the presence of organic envelopes interbedded with and surrounding aragonite crystallites. These first diagenetic processes induce the development of thin fringes of fibrous aragonite cements growing syntaxially on the aragonitic coral fibers, an alteration of the incremental zonation of coral fibers and also preferential diagenetic changes in the calcification centers, including dissolution of their minute internal crystals. Diagenetic patterns observed in Pleistocene coral colonies typically involve the same processes already recognized in the older skeletal parts of living colonies, suggesting that diagenesis occurs through continuous processes instead of clearly differentiated stages. Selective dissolution affects calcification centers and some growth increments of coral fibers. Alteration of the initial transverse zonation of coral fibers also occur through the development of micro-inclusions clearly seen in ultra-thin sections. Although usually thicker than those observed in the ancient skeletal parts of living colonies, syntaxial aragonite cements commonly occur in these fossil skeletons. These cements are often associated with gradual textural modifications of the underlying coral fibers, in particular the loss of the transverse micron-scale zonation. This suggests that the coral skeleton forming the substratum of diagenetic cements is progressively recrystallized in secondary aragonite. This recrystallization of coral aragonite begins at the external margin of the skeleton, just below the diagenetic cements and gradually moves towards the internal skeletal parts. Recrystallization takes place through concomitant fine-scale dissolution-precipitation processes and occurs with textural changes but no mineralogical change. The process of recrystallization is likely initiated by a biological degradation of organic skeletal matrices and can be also driven by thermodynamical constraints involving the lowering of surface free energies resulting from changes in crystal size. Alteration of skeletal organic matrix, textural changes in coral biocrystals through recrystallization and precipitation of secondary diagenetic aragonite may bias the original geochemical characteristics of coral skeletons. Although more work is needed to establish the influence of these early diagenetic processes on the geochemical signatures, it is already well known that the breakdown of organic skeletal envelopes and early recrystallization of shallow-water carbonates alter the stable isotopic composition. The widespread use of coral skeletons as environmental and climatic proxies makes strongly necessary a better understanding of these early diagenetic mechanisms and a precise characterization of the fine-scale diagenetic patterns of specimens for the optimization of geochemical interpretations. In particular, it cannot be assumed that an entire aragonitic composition can guarantee that there is no or slight diagenetic alteration.

Magnetotactic bacteria (MTB) biomineralize magnetosomes, which are defined as intracellular nanocrystals of the magnetic minerals magnetite (Fe3O4) or greigite (Fe3S4) enveloped by a phospholipid bilayer membrane. The synthesis of magnetosomes is controlled by a specific set of genes that encode proteins, some of which are exclusively found in the magnetosome membrane in the cell. Over the past several decades, interest in nanoscale technology (nanotechnology) and biotechnology has increased significantly due to the development and establishment of new commercial, medical and scientific processes and applications that utilize nanomaterials, some of which are biologically derived. One excellent example of a biological nanomaterial that is showing great promise for use in a large number of commercial and medical applications are bacterial magnetite magnetosomes. Unlike chemically-synthesized magnetite nanoparticles, magnetosome magnetite crystals are stable single-magnetic domains and are thus permanently magnetic at ambient temperature, are of high chemical purity, and display a narrow size range and consistent crystal morphology. These physical/chemical features are important in their use in biotechnological and other applications. Applications utilizing magnetite-producing MTB, magnetite magnetosomes and/or magnetosome magnetite crystals include and/or involve bioremediation, cell separation, DNA/antigen recovery or detection, drug delivery, enzyme immobilization, magnetic hyperthermia and contrast enhancement of magnetic resonance imaging. Metric analysis using Scopus and Web of Science databases from 2003 to 2018 showed that applied research involving magnetite from MTB in some form has been focused mainly in biomedical applications, particularly in magnetic hyperthermia and drug delivery.

Engineered man-made composite (inhomogeneous) materials are well known for their superior structural properties. Man-made composite materials and multilayered systems are widely used in civilian and military applications. The combined multilayered systems are attractive because they have the characteristics of being energy absorbent, lightweight, high-strength, high-stiffness, and can provide good fatigue and corrosion resistance. Although the engineered composites are promising and offer mutual exclusive material properties that are not found in other structural materials, they are prone to delamination at the glued layered interface. In contrast to man-made composites, most superior performing materials found in nature possess a hierarchal biomineralized composite structure that tends to be delamination resistant. These delaminate resistant biocomposite structures [e.g. alligator gar’s (Atractosteus Spatula) exoskeleton fish scale] have mechanical properties that vastly exceed the properties of their relatively weak constituents. The fish scale is made up of 90 percent hard (inorganic minerals) and 10 percent soft (polymer-like organic collagen fibers) by volume. Nature integrates hard and soft materials at different length scales to form a two-layered composite that better resists delamination. The objective of this research was to use scanning electron microscopy (SEM) and nanoindentation to investigate the delamination resistant behavior occurring at the layered interface for the alligator gar fish scale composite. The SEM imagery showed at the micron level the collagen bundles + B-Ap crystals (C/B-Ap) form a distinctive two-layered system that is connected by what is described as sawtooth geometrically structured interface. The outermost layer for the exoskeleton fish scale is called ganoine while the inner layer called bone. The layers interface seems to be mainly bonded by mechanical means using sawtooth notches, rather than the chemicals adhesives used in the man-made laminated planar interfaced composites. The notched regions for ganoine+bone materials overlap and are embedded at various depths within each layer to form periodic “repeating” bonded connections. The indentation measurements taken at the nano-level showed that elastic moduli have property gradients occurring through the interfacial transition zone. Noticeably the ganoine layer has elastic moduli ranging from [98–67] GPa while the bone layer elastic moduli ranged from [20–13] GPa. The research findings indicate the sawtooth connections perhaps provide enhanced shear resistance at the interface and may help inhibit debonding. Additionally, the notched interlocking provides a less discrete (graded) interface, which seems to promote durability and delamination resistance.