Academic literature on the topic 'Bifunctional Nano-electrocatalysts'

For rechargeable metal–air batteries, which are a promising energy storage device for renewable and sustainable energy technologies, the development of cost-effective electrocatalysts with effective bifunctional activity for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has been a challenging task. To realize highly effective ORR and OER electrocatalysts, we present a hybrid catalyst, Co3O4-infiltrated La0.5Sr0.5MnO3-δ (LSM@Co3O4), synthesized using an electrospray and infiltration technique. This study expands the scope of the infiltration technique by depositing ~18 nm nanoparticles on unprecedented ~70 nm nano-scaffolds. The hybrid LSM@Co3O4 catalyst exhibits high catalytic activities for both ORR and OER (~7 times, ~1.5 times, and ~1.6 times higher than LSM, Co3O4, and IrO2, respectively) in terms of onset potential and limiting current density. Moreover, with the LSM@Co3O4, the number of electrons transferred reaches four, indicating that the catalyst is effective in the reduction reaction of O2 via a direct four-electron pathway. The study demonstrates that hybrid catalysts are a promising approach for oxygen electrocatalysts for renewable and sustainable energy devices.

For rechargeable metal–air batteries, which are a promising energy storage device for renewable and sustainable energy technologies, the development of cost-effective electrocatalysts with effective bifunctional activity for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has been a challenging task. To realize highly effective ORR and OER electrocatalysts, we present a hybrid catalyst, Co3O4-infiltrated La0.5Sr0.5MnO3-δ (LSM@Co3O4), synthesized using an electrospray and infiltration technique. This study expands the scope of the infiltration technique by depositing ~18 nm nanoparticles on unprecedented ~70 nm nano-scaffolds. The hybrid LSM@Co3O4 catalyst exhibits high catalytic activities for both ORR and OER (~7 times, ~1.5 times, and ~1.6 times higher than LSM, Co3O4, and IrO2, respectively) in terms of onset potential and limiting current density. Moreover, with the LSM@Co3O4, the number of electrons transferred reaches four, indicating that the catalyst is effective in the reduction reaction of O2 via a direct four-electron pathway. The study demonstrates that hybrid catalysts are a promising approach for oxygen electrocatalysts for renewable and sustainable energy devices.

Rechargeable zinc–air batteries (RZABs) are basically dependent on both affordable and long-lasting bifunctional electrocatalysts. A non-precious metal catalyst, a FeNi nanoalloy catalyst (FeNi@NC) with an extremely low metal consumption (0.06 mmol), has been successfully synthesized. It shows a high half-wave potential of 0.845 V vs. RHE for ORR and a low overpotential of 318 mV for OER at 10 mA cm−2, favoring a maximum power density of 116 mW cm−2 for the constructed RZABs. The voltage plateau is reserved even after 167 h of cell operation. The synergistic effect between the nano-sized FeNi alloy and nitrogen-doped carbon with abundant N sites mainly contributes to the electrocatalytic activity. This research can provide some useful guidelines for the development of economic and efficient bifunctional catalysts for RZABs.

Developing a highly stable and non-precious, low-cost, bifunctional electrocatalyst is essential for energy storage and energy conversion devices due to the increasing demand from the consumers. Therefore, the fabrication of a bifunctional electrocatalyst is an emerging focus for the promotion and dissemination of energy storage/conversion devices. Spinel and perovskite transition metal oxides have been widely explored as efficient bifunctional electrocatalysts to replace the noble metals in fuel cell and metal-air batteries. In this work, we developed a bifunctional catalyst for oxygen reduction and oxygen evolution reaction (ORR/OER) study using the mechanochemical route coupling of cobalt oxide nano/microspheres and carbon black particles incorporated lanthanum manganite perovskite (LaMnO3@C-Co3O4) composite. It was synthesized through a simple and less-time consuming solid-state ball-milling method. The synthesized LaMnO3@C-Co3O4 composite was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction spectroscopy, and micro-Raman spectroscopy techniques. The electrocatalysis results showed excellent electrochemical activity towards ORR/OER kinetics using LaMnO3@C-Co3O4 catalyst, as compared with Pt/C, bare LaMnO3@C, and LaMnO3@C-RuO2 catalysts. The observed results suggested that the newly developed LaMnO3@C-Co3O4 electrocatalyst can be used as a potential candidate for air-cathodes in fuel cell and metal-air batteries.

Developing a highly stable and non-precious, low-cost, bifunctional electrocatalyst is essential for energy storage and energy conversion devices due to the increasing demand from the consumers. Therefore, the fabrication of a bifunctional electrocatalyst is an emerging focus for the promotion and dissemination of energy storage/conversion devices. Spinel and perovskite transition metal oxides have been widely explored as efficient bifunctional electrocatalysts to replace the noble metals in fuel cell and metal-air batteries. In this work, we developed a bifunctional catalyst for oxygen reduction and oxygen evolution reaction (ORR/OER) study using the mechanochemical route coupling of cobalt oxide nano/microspheres and carbon black particles incorporated lanthanum manganite perovskite (LaMnO3@C-Co3O4) composite. It was synthesized through a simple and less-time consuming solid-state ball-milling method. The synthesized LaMnO3@C-Co3O4 composite was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction spectroscopy, and micro-Raman spectroscopy techniques. The electrocatalysis results showed excellent electrochemical activity towards ORR/OER kinetics using LaMnO3@C-Co3O4 catalyst, as compared with Pt/C, bare LaMnO3@C, and LaMnO3@C-RuO2 catalysts. The observed results suggested that the newly developed LaMnO3@C-Co3O4 electrocatalyst can be used as a potential candidate for air-cathodes in fuel cell and metal-air batteries.

With the increase in renewable energy usage comes the need for energy storage systems due to intermittency issues. Hydrogen storage systems have been identified as one solution. Unitized regenerative fuel cells (URFC) combine electrolyzers and fuel cells in one device, allowing electricity to be stored and used easily. However, the oxygen electrodes are still affected by high overpotentials and slow kinetics. Perovskite oxides have been identified as a class of materials, which are low-cost, tunable, and active for the oxygen reduction (ORR) and evolution (OER) reactions. Here, we investigate perovskites as bifunctional catalysts for ORR and OER in alkaline solution. We examine and compare two strategies for bifunctional catalysts: using one catalyst, which is able to perform OER and ORR vs. a combination of two catalysts, one active for ORR and one active for OER. Frequently, the catalysts’ performances for these two reactions are measured separately.1,2,3 Here, we investigate how these bifunctional catalysts respond to cycling between the OER and ORR regions. Ba0.5Sr0.5Co0.8Fe0.2O3 (BSCF) is known to be a promising OER catalyst.4,5,6 However, without carbon, it lacks ORR activity.4 La(1-x)SrxMnO3 (LSM) is a promising ORR catalyst.3,7 However, without modification, it has been shown to have limited OER activity.3 Separately, these catalysts lack high performance for both reactions. Here, we combine the two catalysts into a BSCF/LSM/Carbon composite electrode and compare to electrodes prepared from the constituent single material components. In addition, we have synthesized single material perovskites containing both Co and Mn that to the best of our knowledge have never been tested as electrodes for ORR/OER. In order to understand the catalysts’ behaviors under OER and ORR conditions, X-ray adsorption spectroscopy (XAS) was measured continuously while performing cyclic voltammetry. We were able to monitor the continuous changes of the Co, Mn, and Fe oxidation states and local environment during OER and ORR with remarkably high time/applied potential resolution. Our findings illustrate the reversible and irreversible changes that can occur during OER and ORR and provide strategies for future bifunctional catalyst design. References Kirsanova, M. A.; Okatenko, V. D.; Aksyonov, D. A.; Forslund, R. P.; Mefford, J. T.; Stevenson, K. J.; Abakumov, A. M. Bifunctional OER/ORR Catalytic Activity in the Tetrahedral YBaCo 4 O 7.3 Oxide. Mater. Chem. A 2019, 7 (1), 330–341. Elumeeva, K.; Masa, J.; Sierau, J.; Tietz, F.; Muhler, M.; Schuhmann, W. Perovskite-Based Bifunctional Electrocatalysts for Oxygen Evolution and Oxygen Reduction in Alkaline Electrolytes. Acta 2016, 208, 25–32. Xu, W.; Apodaca, N.; Wang, H.; Yan, L.; Chen, G.; Zhou, M.; Ding, D.; Choudhury, P.; Luo, H. A-Site Excessive (La0.8Sr0.2)1+ XMnO3 Perovskite Oxides for Bifunctional Oxygen Catalyst in Alkaline Media. ACS Catal. 2019, 9 (6), 5074–5083. Fabbri, E.; Nachtegaal, M.; Cheng, X.; Schmidt, T. J. Superior Bifunctional Electrocatalytic Activity of Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ /Carbon Composite Electrodes: Insight into the Local Electronic Structure. Energy Mater. 2015, 5 (17), 1402033. Fabbri, E.; Nachtegaal, M.; Binninger, T.; Cheng, X.; Kim, B.-J.; Durst, J.; Bozza, F.; Graule, T.; Schäublin, R.; Wiles, L.; Pertoso, M.; Danilovic, N.; Ayers, K. E.; Schmidt, T. J. Dynamic Surface Self-Reconstruction Is the Key of Highly Active Perovskite Nano-Electrocatalysts for Water Splitting. Mater. 2017, 16 (9), 925–931. Kim, B. J.; Fabbri, E.; Abbott, D. F.; Cheng, X.; Clark, A. H.; Nachtegaal, M.; Borlaf, M.; Castelli, I. E.; Graule, T.; Schmidt, T. J. Functional Role of Fe-Doping in Co-Based Perovskite Oxide Catalysts for Oxygen Evolution Reaction. Am. Chem. Soc. 2019, 141 (13), 5231–5240. Tulloch, J.; Donne, S. W. Activity of Perovskite La1−xSrxMnO3 Catalysts towards Oxygen Reduction in Alkaline Electrolytes. Power Sources 2009, 188 (2), 359–366.

Zinc-air batteries are cost-effective batteries that possess a high energy density (1086 Wh Kg-1), compared to other conventional battery systems. In order to improve the electrochemical performance of electrically rechargeable zinc-air batteries (ERZABs), an effective bifunctional oxygen electrocatalyst is required. Hence, the development of non-noble metal bifunctional catalysts for ORR and OER is of prime importance. The transition metal-based catalysts have increasing demand since they are promising alternatives, in terms of cost and durability, to noble metal catalysts. Metal-organic frameworks (MOF) based catalysts show high catalytic activity due to adjustable pore size, ultra-high surface area, and structural designability[1].Increasing porosity can augment the catalytic activity by increasing the surface area, thereby enhancing the ORR kinetics. In the present work, a CFZ-NPC (CoFeZn-MOF derived nanoporous carbon) was synthesized via hydrothermal method and investigated as a bifunctional catalyst for rechargeable zinc-air batteries[2]. The catalyst shows a high electrochemical activity towards oxygen reduction reaction with a half-wave potential of 830 mV vs. RHE and a comparable oxygen evolution activity (overpotential of 379 mV vs. RHE at 10 mA cm-2 ) with IrO2 (Over potential of 377 mV at 10 mA cm-2). The binder-free CFZ-NPC air electrode when applied into a Zinc-air battery system, delivers a low charge-discharge potential gap of 862 mV at 5 mA cm-2. Interestingly, the catalyst possesses an excellent electrochemical performance in the electrically rechargeable Zn-air battery over 1000 cycles at selected DOD for 157 h with a specific capacity of 890 mAh g(Zn) -1 without much efficiency drop. Financial support from Department of Science and Technology, Govt. of India under research grant number DST/TMD/MECSP/2K17/20 is gratefully acknowledged References; [1] Ren, Shuangshuang et al. 2020. “Bifunctional Electrocatalysts for Zn-Air Batteries: Recent Developments and Future Perspectives.” Journal of Materials Chemistry A 8(13): 6144–82. [2] Tang, Jing et al. 2016. “Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nano porous Carbons.” Nature Publishing Group (April): 1-8.

Incorporating intermittent renewable energy sources into the power grid will require large amounts of grid-scale energy storage. Electrochemical batteries are a versatile and scalable energy storage option and, hence, Li-ion batteries have been widely adopted to store excess wind and solar energy [1]. Li-ion batteries, however, have a relatively low energy density and serious safety concerns. An alternative electrochemical battery option lies with zinc-air batteries. This technology uses lower cost materials and is overall much safer. Furthermore, zinc-air batteries have a much larger theoretical energy density than Li-ion batteries [2]. The major impediment to wide-scale adoption of zinc-air batteries is the low energy efficiency because of the poor reaction kinetics at the air electrode. Both the charge and discharge reactions at the air electrode are sluggish and require the use of catalysts to obtain practicable performance. However, many catalysts active towards the charge reaction are not active towards the discharge reaction, and vice versa. The development of a catalyst active towards both the charge and discharge reactions, known as a bifunctional catalyst, is therefore a high priority [3]. Furthermore, catalysts employed in zinc-air batteries often show instability, with performance degradation evident after a few cycles. Ultimately, a highly stable bifunctional zinc-air battery catalyst is of the utmost importance. The aim of this work is to develop highly stable bifunctional catalysts for zinc-air batteries using atomic layer deposition (ALD). With ALD, extremely conformal catalyst coatings can be deposited directly on the air electrode of a zinc-air battery. The self-limiting surface reactions of ALD ensure that electrode porosity is maintained while maximizing the total coating surface area [4]. Since ALD operates in the gas phase, catalytic coatings can be deposited deep within the pores of the air electrode. This will help maintain the three-phase boundary necessary for the discharge reaction and ultimately improve the stability of a zinc-air battery [5]. To create a bifunctional catalyst, two ALD processes, one for manganese oxide and another for iron oxide, is combined into one ALD supercycle, depositing a mixed manganese-iron oxide. Since manganese oxide is a well-established discharge catalyst [6], and iron oxide demonstrates activity towards the charge reaction [7], this mixed manganese-iron oxide exhibits bifunctional activity in a zinc-air battery. An optimized supercycle process will be discussed and full-cell battery test results showcased. Specifically, the bifunctional efficiency of a zinc-air battery can be improved by more than 10% by using the mixed manganese-iron oxide catalyst. In addition, the high stability of the manganese-iron oxide catalyst is demonstrated, where bifunctional efficiency can be maintained at over 95% of the initial value over 200 cycles. Materials characterization of the mixed manganese-iron oxide, deposited through ALD, is also included. [1] L. Trahey, F. R. Brushett, N. P. Balsara, G. Ceder, L. Cheng, Y. M. Chiang, N. T. Hahn, B. J. Ingram, S. D. Minteer, J. S. Moore, K. T. Mueller, L. F. Nazar, K. A. Persson, D. J. Siegel, K. Xu, K. R. Zavadil, V. Srinivasan, and G. W. Crabtree, “Energy Storage Emerging: A Perspective from the Joint Center for Energy Storage Research,” Proc. Natl. Acad. Sci. U. S. A., vol. 117, no. 23, pp. 12550–12557, 2020. [2] J. Fu, R. Liang, G. Liu, A. Yu, Z. Bai, L. Yang, and Z. Chen, “Recent Progress in Electrically Rechargeable Zinc – Air Batteries,” Adv. Mater., vol. 31, no. 31, p. 1805230, 2019. [3] E. Davari and D. G. Ivey, “Bifunctional electrocatalysts for Zn – air batteries,” Sustain. Energy Fuels, vol. 2, no. 1, pp. 39–67, 2018. [4] C. Detavernier, J. Dendooven, S. Pulinthanathu Sree, K. F. Ludwig, and J. A. Martens, “Tailoring nanoporous materials by atomic layer deposition,” Chem. Soc. Rev., vol. 40, no. 11, pp. 5242–5253, 2011. [5] M. P. Clark, M. Xiong, K. Cadien, and D. G. Ivey, “High Performance Oxygen Reduction/Evolution Electrodes for Zinc − Air Batteries Prepared by Atomic Layer Deposition of MnOx,” ACS Appl. Energy Mater., vol. 3, no. 1, pp. 603–313, 2020. [6] M. P. Clark, T. Muneshwar, M. Xiong, K. Cadien, and D. G. Ivey, “Saturation Behavior of Atomic Layer Deposition MnOx from Bis(Ethylcyclopentadienyl) Manganese and Water: Saturation Effect on Coverage of Porous Oxygen Reduction Electrodes for Metal-Air Batteries,” ACS Appl. Nano Mater., vol. 2, no. 1, pp. 267–277, 2019. [7] M. Labbe, M. P. Clark, Z. Abedi, A. He, K. Cadien, and D. G. Ivey, “Atomic layer deposition of iron oxide on a porous carbon substrate via ethylferrocene and an oxygen plasma,” Surf. Coatings Technol., vol. 421, p. 127390, 2021.