Academic literature on the topic 'Basal stem application'

Three herbicides were tested using four stem application techniques for control of both single trunks and clumps of tree-of-heaven [Ailanthus altissima (Miller) Swingle]. Imazapyr, triclopyr, and glyphosate were applied using cut stump, stump injection, and stem injection techniques. Imazapyr and triclopyr were also applied as a basal bark treatment. Treatments were compared against manual cutting and untreated controls. Untreated cut stems did not provide control of tree-of-heaven. Cut stump treatment with imazapyr and triclopyr (20% v/v in oil) resulted in more than 90% reduction in both vigor ratings and resprouting of single stems and clumps. In contrast, stump injection applications were ineffective with all herbicides. For stem injection treatments, undiluted imazapyr gave the best results (>95% canopy reduction), but glyphosate also provided excellent control (92% canopy reduction). Removing stems 4, 8, or 12 months after treatment did not impact the level of control with imazapic. Imazapic at half the standard rate also gave good control of multistemmed clumps. Basal bark treatments with imazapyr or triclopyr (20% v/v in oil) gave equally good results, providing nearly complete control. Triclopyr is less selective than imazapyr and thus offers a better option when desirable vegetation surrounds the stems. These results provide several effective options for the control of tree-of-heaven in both urban and riparian sites.

Abstract The effectiveness of low-volume basal application of herbicide—"streamline" application—was evaluated on 25 hardwood species and loblolly pine. Test mixtures were step-wise rates of Garlon 4 mixed in diesel fuel with a penetrant added. Most comparisons tested 10%, 20%, and 30% mixtures of Garlon 4, while tests with saplings and small trees used 20%, 30%, and 40%. Target stems ranged from 2 ft tall to 6 in. dbh. Applications were made in February, using pressure-regulated handguns equipped with straight stream nozzles attached to backpack sprayers. Two bands of the herbicide mixture were applied to two sides of all stems. After 18 months, susceptible hardwood species with greater than 80% average control at all three Garlon rates were water oak (Quercus nigra), am. hornbeam (Carpinus caroliniana), black locust (Robinia pseudoacacia), boxelder (Acer negundo), huckleberry (Vaccinium elliottii), sumacs (Rhus spp.), southern bayberry (Myrica cerifera), and mountain-laurel (Kalmia latifolia). Tolerant species with less than 40% control were sourwood (Oxydendrum arboreum), titi (Cliftonia monophylia), and yellow poplar (Liriodendron tulipifera) (>1 in. groundline diameter). Treatment of loblolly pines resulted in an average of 22% mortality. Smaller stems were more readily killed than larger stems for all species. South. J. Appl. For. 14(4):161-165.

AbstractBasal bark treatments involve the application of concentrated herbicide solution on each individual stem of targeted plants. When applied to stands of invasive plants with high stem densities, basal bark treatments may result in the use of large quantities of herbicide in a given area. The effect of basal bark treatments using a solution of 25% triclopyr herbicide and 75% methylated seed oil was tested on research plots located in six different groves of invasive fig, a densely stemmed, problematic invader of riparian forests in California. The experimental treatments resulted in application rates that were equivalent to 28 to 44 kg ae/ha, greatly in excess of the labeled maximum use rate of 9 kg ae/ha (8 lb/ac). At 175 d after application, soils near the fig trunks contained high levels of triclopyr residues (up to 6.6 ppmw), suggesting that the chemical made its way into soils during this period and was not completely degraded. Although the mortality of native plants transplanted into treated fig groves was low (up to 16%), it was significantly greater than the mortality experienced by native plants transplanted into untreated control sites (0%). Although effective in controlling invasive fig trees (> 99% mortality), the high herbicide application rates from basal bark treatment preclude the use of this treatment in large fig groves. These treatments may be appropriate, however, when fig groves are small or isolated enough to prevent overapplication on a per-area basis. In addition, neither limited basal bark applications of triclopyr (< 40% of stems treated) nor foliar spray treatments of 2% glyphosate were effective control measures. Further investigation is needed on ways to control large invasive fig groves.

Abstract Research was conducted to determine whether a foliar spray application of the commercial root-promoting formulation Dip 'N Grow® [10,000 ppm indole-3-butyric acid (IBA) and 5,000 ppm 1-naphthaleneacetic acid] or the potassium (K) salt of IBA (K-IBA) would be as effective as a basal quick-dip for rooting stem cuttings of selected ornamentals. Cuttings of Chrysanthemum pacficum sprayed with Dip 'N Grow® at 50 + 25 ppm IBA + NAA or K-IBA at 0 to 50 ppm showed generally similar root development measures compared to a basal quick-dip; an exception was 10 ppm K-IBA which produced greater total root length. Cuttings of Forsythia x intermedia ‘Lynwood Gold’ typically did not differ in root development under the two application methods, but cuttings sprayed with Dip 'N Grow® at 0 + 0 to 10 + 5 ppm IBA + NAA exhibited greater shoot growth 80 days after sticking (insertion into the rooting substrate) than cuttings receiving a basal quick-dip. Root and shoot development measures were similar or lower for cuttings of Abelia x grandiflora, Hydrangea paniculata, and Lagerstroemia (indica x fauriei) ‘Natchez’ sprayed with auxin compared to a basal quick-dip.

Abstract Application costs and efficacy were determined for manual preharvest herbicide treatments applied to control American beech (Fagus grandifolia Ehrh.) that was interfering with the establishment and development of black cherry (Prunus serotina Ehrh.) in central West Virginia. The treatments consisted of four levels of basal area reduction using combinations of two application methods: hack-and-squirt injection with Accord (41.5%) and basal spraying with Garlon 4 (61.6% butoxyethyl ester). The treatments were applied in late Aug. 2000 and evaluated 12 months after treatment. A numerical rating system ranging from 1 to 7 (0–100% crown affected), based on a visual estimation of top kill, was used to evaluate the efficacy of each treatment. Trees receiving a rating of 5 (75% crown control) or greater were considered controlled. After 12 months, almost complete control (99%) was achieved with both application methods. Injection of ≥6.0-in. dbh beech stems also controlled 52% and 21.6% of small untreated beech understory stems in the 2-ft tall to 0.9-in. dbh and 1.0- to 5.9-in. dbh classes, respectively. Average application costs (chemical and labor) ranged from $39.28/ac for injection of 159 stems/ac ≥6 in. dbh to $80.32/ac for basal spraying 396 stems/ac in the 1.0- to 5.9-in. dbh class and $230.09/ac for basal spraying 3,743 stems/ac in the 2-ft tall to 0.9-in. dbh class. Basal spraying the numerous small 2-ft tall to 0.9-in. dbh stems dramatically increased treatment costs. Black cherry occupied 30% of total stand basal area and accounted for 91% of total stand value ($6,288.10/ac). Application costs expressed as a percentage of total stand value ranged from <1% for the injection-only treatment up to 6.5% for combination basal spray and injection treatments. The individual stem herbicide application methods described here are applicable to the steep topography and small nonindustrial ownerships found in Appalachia.

Evidence from numerous cancers suggests that increased aggressiveness is accompanied by up-regulation of signaling pathways and acquisition of properties common to stem cells. It is unclear if different subtypes of late-stage cancer vary in stemness properties and whether or not these subtypes are transcriptionally similar to normal tissue stem cells. We report a gene signature specific for human prostate basal cells that is differentially enriched in various phenotypes of late-stage metastatic prostate cancer. We FACS-purified and transcriptionally profiled basal and luminal epithelial populations from the benign and cancerous regions of primary human prostates. High-throughput RNA sequencing showed the basal population to be defined by genes associated with stem cell signaling programs and invasiveness. Application of a 91-gene basal signature to gene expression datasets from patients with organ-confined or hormone-refractory metastatic prostate cancer revealed that metastatic small cell neuroendocrine carcinoma was molecularly more stem-like than either metastatic adenocarcinoma or organ-confined adenocarcinoma. Bioinformatic analysis of the basal cell and two human small cell gene signatures identified a set of E2F target genes common between prostate small cell neuroendocrine carcinoma and primary prostate basal cells. Taken together, our data suggest that aggressive prostate cancer shares a conserved transcriptional program with normal adult prostate basal stem cells.

Trichoderma harzianum multiplied in farm yard manure and applied with neem cake to coconut palm affected by basal stem rot disease reduced the severity of the disease. T harzianum applied in coconut basins survived for more than one year, though the population gradually declined after four months. Application of Azotobacter or phosphobacterium (200 g peat based inoculurn) to basal stern rot disease affected coconut gave lesser increase in disease index than control and increased the nut yield. Tapping for neera production in mild and moderately diseased palms showed lesser disease index than untapped palms of corresponding disease severity.

The vascular bundle plays a vital role in photoassimilates transportation in rice. However, the vascular bundle characteristics of basal internode and its relationship with stem assimilates allocation and yield remain unclear. In this study, experiments with four different types of rice varieties subjected to three nitrogen application levels were conducted. The results showed that large vascular bundles (LVB) and small vascular bundles (SVB)-related traits of basal internode exhibited genotypic differences. Indica-japonica hybrid varieties had the highest number of cross sectional areas and phloem areas of LVB and SVB, thus the highest stem nonstructural carbohydrates (NSC) translocation, grain filling percentage and grain yield, followed by indica hybrid varieties and indica conventional varieties, and those were the lowest in japonica conventional varieties. The LVB and SVB related traits were significantly and positively correlated with stem NSC translocation, grain filling percentage and grain yield, respectively These results suggested that improving the characteristics of basal internodes was beneficial to enhance stem NSC translocation and consequently increase grain yield. Nitrogen application increased LVB and SVB related traits. Therefore, varieties with developed vascular bundles of basal internodes and cultivation techniques for improving vascular bundle related traits should be considered as the effective route for increasing grain yield.

Triclopyr {[(3,5,6-trichloro-2-pyridinyl)oxy] acetic acid}, 2,4,5-T [(2,4,5-trichlorophenoxy)acetic acid], picloram (4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid), and clopyralid (3,6-dichloro-2-pyridinecarboxylic acid) were applied to honey mesquite (Prosopis glandulosaTorr. # PRCJG) on seven different dates about every 3 weeks from May to September in 1980 and 1981. Concentrations of 2,4,5-T or triclopyr in stem tissue were usually less than 2 μg/g fresh weight regardless of date of application. Concentrations of picloram and clopyralid were as high as 11 and 22 μg/g fresh weight, respectively, in upper stem phloem at some dates of application. Higher concentrations of all herbicides were detected in upper stem phloem than in the upper stem xylem or basal stem phloem or xylem. More herbicide tended to be detected in stems when herbicides were applied early (May and June) than late (August and September) in the season. Concentrations of triclopyr and picloram recovered from honey mesquite stems were about 25% greater at 3 than at 30 days after treatment, whereas concentrations of 2,4,5-T and clopyralid were about 50% greater at 3 than at 30 days after application.

The interactions among IBA concentrations and durations of treatment and propagation medium temperatures on the rooting of stem cuttings were compared for cultivars of Hibiscus rosa-sinensk L. Cultivar rooting was rapid with extensive root development for `Pink Versicolor', average for `Jim Hendry', and slow with few roots per cutting for `Silver Anniversary'. The IBA concentration and duration of treatment that cuttings required to reach maximum rooting declined with increase in medium temperature (from 18 to 34C). `Pink Versicolor' stem cuttings receiving 4- to 6-minute basal dips required 8000 ppm IBA with the medium at 18C, 6000 ppm at 26C, and 2500 ppm at 34C, to achieve 100% rooting of the cuttings. `Pink Versicolor' stem cuttings had the most roots at 10,000 ppm IBA, with 10-min stem dips best at 18C, 4 to 8 min at 26C, and 7 to 8 min at 34C. Maximum dry weights per root were achieved at 6000 ppm IBA, with longer basal stem dip durations needed at 18C than 26 or 34C. Lower IBA levels were required for 100% rooting of `Pink Versicolor' than for `Jim Hendry', with highest levels needed for `Silver Anniversary'. The results indicated that the benefits in rooting achieved from higher IBA levels greatly exceeded those that could be achieved by increased medium temperature. Chemical name used: indole-3-butyric acid (IBA).

Cette thèse constitue une nouvelle approche pour la prédiction des maladies des plantes dans une plantation par combinaison de fusion de données et modélisation spatio-temporelle. La maladie des plantes est un problème majeur dans le monde de l'agriculture. Par exemple en Malaisie, la maladie de la pourriture de basal de la tige (BSR) causée par le champignon Ganoderma Boninense est la maladie la plus grave pour les plantations de palmiers à huile. Le champignon infecte les palmiers à huile,causant des pertes de rendement et détruisant au final les arbres. Divers facteurs ont été précédemment signalés, qui influencent l'incidence de la BSR, tels que les cultures précédentes, les techniques de replantation, les types de sols et l'âge des arbres. Une gestion efficace et durable des stratégies pour contrôler le BSR se heurte principalement à un manque de compréhension des mécanismes d'établissement de la maladie, de son développement et de sa propagation. La présente recherche est une tentative d'appliquer la technique de fusion de données et la modélisation temporelle en système d'Information géographique (SIG) pour étudier le comportement des maladies des plantes dans un domaine particulier (zone artisanale). Cette recherche portera sur comment les SIG peuvent aider à évaluer la distribution des maladies des plantes dans une plantation de petite échelle. Avec les progrès simultanés dans les systèmes de positionnement global (GPS) et l'utilisation des systèmes d'Information géographique, ces techniques ont fourni de puissants outils d'analyse pour l'agriculture de précision. Les données pour l'analyse proviennent de palmiers à huile des expériences de densité de plantation aux stations de recherche MPOB à Teluk Intan, Perak, Malaisie.Dans le cas de la maladie de la BSR, les résultats de l'émission de modélisation prédictive ont observé une corrélation entre les maladies BSR prédites avec celles visuellement données par le BSR. Il a été constaté que la modélisation prédictive proposée a bien prédit la présence de la maladie de la BSR. Même si au début d'infection des maladies BSR, le modèle n'a pas fixé exactement la distribution de la maladie, la performance du modèle sera améliorée avec la sélection de la source de données. Dans l'ensemble, le modèle a bien prédit la présence de maladies avec une précision allant jusqu'à 98,9 %
This thesis represents a new approach for predicting plant disease in a plantation through combination of data fusion and spatio-temporal modelling. Plant disease is a major problem in the world of agriculture. Example in Malaysia, basalstem rot disease (BSR) caused by Ganoderma Boinense is the most serious disease for oil palm plantation in Malaysia. The fungus infects oil palm trees, initially causing yield loss and finally killing the trees. Various factors were previously reported to influence incidence of BSR, such as previous crops, techniques for replanting, types of soils and the age of trees. At present effective and sustainable management strategies to control BSR are hampered mainly by a lack of understanding of mechanisms of disease establishment, development and spread. The present research is an attempt to apply data fusion technique and temporal modelling in Geographical Information System (GIS) to investigate the behaviour of plant disease in a specific area (small skill area). This research will focus on how GIS can help to assess the distribution plant disease in a small scale plantation. With concurrent advances in global positioning systems (GPS) and the use of geographical Information Systems(GIS) techniques have provided powerful analysis tools for precision agriculture. Data for analysis were obtained from oil palm planting density experiments at MPOB research stations at Teluk Intan, Perak, Malaysia. In the case of BSR disease, the results of the predictive modelling show a significance correlation between predicted BSR diseases with visually observed BSR data. It found that the proposed predictive modelling has well predicted the presence of BSR disease. Although at the beginning stage of BSR diseases infection, the model has not fitted exactly the distribution of the disease, we believe that with the proper selection of the source of data, the performance of the model will be improved.Overall, the model has well predicted the presence of diseases with accuracy up to 98.9%

Prosopis spp. are prolific seeders with estimates of seed production reaching from 630,000 to 980,000 seeds per mature tree per annum (Felker 1979; Harding 1988). Prosopis velutina shrubs have been recorded to produce up to 5,000 seeds per year (Glendening and Paulsen

1955). The plant has the ability to establish on disturbed or bare soil and can develop into very dense infestations. The plant often grows on scalded areas devoid of other vegetation and out-competes native herbage for moisture and light.

The plant is armed with long axillary spines; it branches from the base and has long arching stems. Its leaves are not commonly eaten by sheep and bovine breeds. Consequently, it forms dense stands that restrict the movement of stock, particularly around watering points, and this interferes with mustering.

There are many options for control of mesquite with herbicide application being integral in a management suite of mesquite control initiatives. Other control methods, which limit its distribution and spread, include mechanical removal, grazing management, competitive pasture

establishment, biological control, and a burning regime where adequate fuel is available.

The thesis discusses merits of the Prosopis species. Commonly known as mesquite or prickly bush, the Australian pest plant is endemic in the southern United States. The description then turns to how the weed was introduced into Queensland at both Quilpie and Hughenden in the north of the state. Some detail is given to its distribution and the effects on primary producers and the environment, and on the cost of control initiatives conducted through the Queensland Department of Natural Resources and Mines. 

Scientific findings from the research process are considerable given the base knowledge when the mesquite research project was revived in 1989. Initially, a research review of available literature was conducted revealing a large pool of knowledge from the United States of America. Their research findings on foliar applied herbicides have resulted in a high utilization of tank mixes principally containing triclopyr + clopyralid formulations sometimes with hydrocarbon additives. A more comprehensive summary of field research findings for Queensland is compiled as part of this thesis (Chapter 8) and presents some herbicide control options and constraints that may qualify their performance. Basal stem research in North America has produced many adopted recommendations. There have been numerous experiments on controlling mesquite with herbicides with many referred to in Control of Mesquite in the USA (Chapter 1). 

Chapter 2 presents a comparative analysis conducted to determine the different effects of applied herbicides to targeted young mesquite when applied in early summer compared to application in autumn. Formulations of fluroxypyr as well as metsulfuron methyl did not prove

efficacious in this trial. For the first time glyphosate proved to be a valuable herbicide in controlling mesquite when applied in autumn. Triclopyr + picloram and triclopyr alone proved to be more effective following wet conditions when applied in the early summer compared to the autumn application. However, treated plants growing adjacent to continuous paddock ponding were able to recover. Clopyralid exhibited high efficacy in both early summer and autumn treatment applications. 

Following poor control of Prosopis velutina at Quilpie by treatments recommended for control

of Prosopis pallida, a potted plant pilot trial was conducted to determine if the two species responded similarly (Chapter 3). The results indicated that Prosopis velutina was ineffectively controlled by herbicide application, at standard rates, compared to the control of Prosopis pallida. The follow-on replicated trial detail in Chapter 4 indicates a similar response for both

species. The effects of the treatments indicated differing susceptibility between the two species,

with metsulfuron, fluroxypyr, 2,4-D + picloram and triclopyr + picloram demonstrating the most pronounced differences compared to the glyphosate formulations here negligible difference occurred. A re -application of all herbicides to the surviving plants, and to a control

group, indicated that susceptibility can decrease when a follow-up application is in autumn and the time since initial application is short. This trend was particularly noticeable for P. velutina where previous sub -lethal damage prevented effective herbicide action. 

More fieldwork was conducted following this shade -house work as a prolific growth phase occurred in Quilpie mesquite in the early summer of 1999 (Chapter 5). Four glyphosate, and four triclopyr tank mixes and a control set out in each of three habitats made up the 27 plots evaluated in this aerial herbicide experiment. The triclopyr + picloram formulations at 5 and 7 L ha -1 with the addition of paraffinic oil (582 g L-1) and non-ionic surfactants (208 g L-1) produced the most efficacious and uniform results although triclopyr treatment with the addition of 1000 g L-1 alcohol alkoxylate produced similar results. However, the long-term effect was compromised because of the lack of a residual component in this formulation. 

A more manageable result was obtained when larger older plants were foliar overall sprayed using truck -mounted high pressure equipment (Chapter 6). A total of 33 treatments were assessed after each of four assessments of various herbicide mixtures. A blocking factor was plant density. Glyphosate tank formulations were consistently more efficient than other treatments, at all densities, except in combination with metsulfuron methyl. In the low density plots flumetsulam 0.10 g L-1 + glyphosate 3.60 g L-1 tank mix performed significantly better

than other treatments between the second and third applications and the third and fourth applications. Treatments containing clopyralid also showed high efficacy.  

A further experiment using the most common method of control (basal stem application technology) was conducted using dieseline as the herbicide carrier in March 1995 (Chapter 7).

The higher strength treatments with dicamba and triclopyr formulations showed the most activity irrespective of plant size (> 1.5 m or < 1.5 m) or water availability with the higher strength of each formulation, dichloromethoxybenzoic amine @ 10 g a.i. L-1 and triclopyr butoxyethyl ester 10 g a.i. L-1, being the most efficacious and not showing significant differenc from each other. 

In conclusion a three-year cycle planner was developed incorporating best control strategies researched within this thesis (Chapter 8). Suggestions were also put forward covering grazing management to enhance the effect of control strategies.

The chapter starts with a review of a few unfounded arguments sometimes used to account for snow slab instability, and often resulting from the application of mechanical laws that are invalid in a granular, brittle, and healable material like snow. Statistical aspects are investigated using a two-threshold cellular automaton, one for basal instability, and the second one for crown crack opening. The results reproduce the power-law size distribution of starting zone sizes mentioned in chapter 4, and validate a “4-step” triggering scheme made of successive initiation and expansion events for both the basal crack and the crown crack. The possible sintering of collapsed weak layers is then analyzed. It is shown to flow as a slurry for shear strain rates less than a predetermined threshold, or to sinter in the opposite case, which provides a “joker” to any successful “4-step” scheme, turning an incipient avalanche into a simple “whumpf”.

In this study, the use of natural fibres (flax and basalt) in combination with a recyclable epoxy matrix based on cleavable amines is suggested for improving the sustainability of marine industry. In addition, a new and eco-friendly anodizing process based on tartaric sulfuric acid solution (TSA) and a pore widening step in a NaOH aqueous solution was carried out on aluminium alloy (AA5083) to evaluate its effect on the adhesion strength and damage tolerance after low velocity impact of co-cured adhesive joints with a basalt fibre reinforced and recyclable laminate. The durability in marine environment was simulated by exposing samples to salt-fog spray conditions over a period of 90 days. Results highlighted the potential of the proposed natural fibre composites, even though the interfacial adhesion with the recyclable matrix needs to be improved, while the anodizing treatment significantly increased the damage tolerance of the joints irrespective of ageing, impact energy and temperature compared to the reference joints.

Mesenchymal stem cells (MSCs) are a clinically attractive alternative to chondrocytes for the development of engineered cartilage tissue owing to their ease of isolation and chondrogenic potential [1]. However, the mechanical properties of MSC-based constructs have yet to match those of native cartilage or of chondrocyte-based constructs cultured similarly [1]. One route for improving these properties may be the application of mechanical stimulation, as normal cartilage development and homeostatic maintenance is dependent on force transduction. In a tissue engineering context, dynamic compression applied to chondrocyte-seeded hydrogels modulates both matrix production and mechanical properties [2, 3]. Similarly, when MSCs are embedded in 3D hydrogels, expression of chondrogenic markers and cartilaginous ECM synthesis are differentially regulated by dynamic compressive loading [4, 5]. Indeed, we have recently shown that long-term dynamic loading initiated after a pre-culture period of 21 days in pro-chondrogenic medium improves matrix distribution and the compressive properties of MSC-seeded constructs [5]. Interestingly, when loading was initiated after a single day of culture, mechanical properties failed to develop [6, 7], suggesting that elaboration of matrix was required prior to dynamic loading in order to positively direct construct maturation. When chondrocytes are embedded in agarose, the initial growth phase is characterized by the establishment of a dense pericellular matrix (PCM). At early times in culture, before these islands of PCM become connected into an interterritorial matrix, cells are protected from bulk deformation applied to the gel [8]. In a recent study, we showed that clonal heterogeneity in stem cell populations determines the rate at which this PCM forms, with some MSC clones rapidly establishing a dense PCM, while others fail to develop a robust PCM (and so continue to deform with gel deformation) through several weeks in culture [9]. To further this investigation, this study charted the culture time-dependent changes in ECM connectivity and MSC deformation under basal and chondrogenic conditions.