Academic literature on the topic 'Automobiles Motors Cooling systems Design and construction'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Automobiles Motors Cooling systems Design and construction.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Automobiles Motors Cooling systems Design and construction"
Daoud, Raid W., Obed Majeed Ali, Omer Khalil Ahmed, and Ihab A. Satam. "Arduino-based design and implementation of experimental rooms with a trombe wall for solar cells applications." Bulletin of Electrical Engineering and Informatics 12, no. 3 (June 1, 2023): 1248–55. http://dx.doi.org/10.11591/eei.v12i3.4522.
Full textSendrayaperumal, Angalaeswari, Somyak Mahapatra, Sabuja Sanket Parida, Komal Surana, Parandhaman Balamurugan, L. Natrayan, and Prabhu Paramasivam. "Energy Auditing for Efficient Planning and Implementation in Commercial and Residential Buildings." Advances in Civil Engineering 2021 (September 15, 2021): 1–10. http://dx.doi.org/10.1155/2021/1908568.
Full textDragomirov, S. G., M. S. Dragomirov, P. Ig Eydel, and A. Y. Gamayunov. "Analysis of the current level of technology and equipment development of coolant filtration in automotive and tractor engines." Traktory i sel'hozmashiny 1, no. 4 (2020): 12–20. http://dx.doi.org/10.31992/0321-4443-2020-4-12-20.
Full textDissertations / Theses on the topic "Automobiles Motors Cooling systems Design and construction"
Zhao, Gui Quan. "Design, control and experimental testing of intelligent variable dual-fuel automotive engines." Thesis, University of Macau, 2017. http://umaclib3.umac.mo/record=b3691635.
Full textVan, Vuuren Christiaan Michael. "Modelling of internal combustion engine intake and exhaust processes." Thesis, Stellenbosch : Stellenbosch University, 2001. http://hdl.handle.net/10019.1/52343.
Full textENGLISH ABSTRACT: This thesis is concerned with unsteady, one-dimensional flow, which closely mimics those found in the manifolds of internal combustion engines. The physical equations describing problems of this nature are presented and some of the important concepts introduced. These equations and concepts were verified by comparison to published results. The Method of Characteristics (MaC) for unsteady one-dimensional flow with friction and heat transfer was used to analyse the gas flow through the inlet and exhaust systems of an engine. The theoretical derivation of unsteady gas dynamic boundary conditions is presented and the integration with the unsteady pipe flow explained. A simulation flow model was developed to analyse the flow by using the Mae. Thisflow model was then incorporated into an engine simulation program, ESA,to simulate internal combustion engines and to predict the performance of a specific engine. A cam-profile model and an in-cylinder thermodynamic model are used to complete the ESAsoftware. Experimental work was done on a modified Nissan Z24/NA20 engine to evaluate the simulation model. The manifolds of the Nissan Z24/NA20 were modified to isolate one of the cylinders for a proper single cylinder model. More experimental work was done on a Volkswagen 1.6£ 8-valve and a 1.6£ 20-valve engine to obtain performance data on two inlet manifolds developed using the ESAsoftware. Performance data and pressure traces in the inlet manifold of the Nissan Z24/NA20 were recorded for comparison with the ESA software. Good correspondence was found between tested and modelled data and the differences varied between ±5% on engine performance data and pressure wave frequency predictions, and ± 10% on pressure pulse amplitudes.
AFRIKAANSE OPSOMMING: Hierdie tesis handeloor bestendige, eendimensionele vloei, wat die gasvloei in spruitstukke van binnebrandenjins naboots. Die nodige vergelykings wat hierdie tipe probleme beskryf asook van die belangrikste konsepte, word bespreek. Hierdie vergelykings en konsepte is met behulp van gepubliseerde data geverifieer. Die Metode van Karakteristieke (MVK) vir bestendige, eendimensionle vloei met wrywing en warmte oordrag, is gebruik om die gasvloei deur inlaat en uitlaat sisteme van 'n enjin te analiseer. Die teoretiese afleiding van bestendige gasdinamiese randvoorwaardes asook hul integrasie met die bestendige pypvloei, word verduidelik. 'n Simulasie vloeimodel is ontwikkelom die vloei met behulp van die metode van karakteristieke te analiseer. Hierdie vloeimodel is deel van 'n omvattende enjinsimulasie program, ESA. Dit word gebruik om binnebrandenjins te simuleer en enjinwerkverrigting te voorspel. 'n Nokprofielmodel en 'n termodinamiese ontbrandingsmodel word gebruik om die enjinsimulasie program af te rond. Eksperimentele toetse op 'n gemodifiseerde Nissan Z24/NA20 enjin is gebruik om die simulasie model te evalueer. Die spruitstukke van die Nissan Z24/NA20 is aangepas om een van die silinders te isoleer om so 'n geskikte enkelsilindermodel te skep. Verdere eksperimentele toetse is gedoen op Volkswagen 1.6£8- klep en 1.6£ 20-klep enjins. Werkverrigtingsdata is verkry op twee nuwe inlaatspruitstukke wat met behulp van die ESAsagteware ontwerp is. Werkverrigtingsdata en drukverdelingsdata in die inlaatspruitstuk van die Nissan Z24/NA20is aangeteken om te vergelyk met die resultate van die ESAsagteware. Goeie ooreenstemming is verkry tussen toets- en gemoduleerde data. Die verskille varieer tussen ±5% op enjin werkverrigtingsdata en drukpulsfrekwensie voorspellings, en ± 10%op drukpuls-amplitudes.
Books on the topic "Automobiles Motors Cooling systems Design and construction"
Bamsey, Ian. Competition car controls: Controls & instrumentation, driver safety & support systems, clothing, communication, cooling. [Sparkford, Near Yeovil, Somerset, England: Haynes, 1990.
Find full textMaximum boost: Designing, testing, and installing turbocharger systems. Cambridge, MA: Robert Bentley Automotive Publishers, 1997.
Find full textBell, Corky. Maximum boost: Designing, testing, and installing turbocharger systems. Croydon: Motor Racing, 1997.
Find full textTurbo: Real world high-performance turbocharger systems. North Branch, MN: CarTech, 2008.
Find full textS, Murthy T. K., and Brebbia C. A, eds. Computers in design, manufacture and operation of automobiles. Southampton: Computational Mechanics, 1987.
Find full textHow to build & modify intake & exhaust systems. Osceola, WI: Motorbooks International, 1994.
Find full textUlsoy, Ali Galip. Automotive control systems. Cambridge: Cambridge University Press, 2012.
Find full textInstitution of Mechanical Engineers. Combustion Engines Group., ed. Diesel fuel injection systems: Papers presented at a seminar organized by the Combustion Engines Groupof the Institution of Mechanical Engineers and held at the Institution of Mechanical Engineers on 28-29 September 1995.. London: Mechanical Engineering Publications for The Institution of Mechanical Engineers, 1995.
Find full textA, Rothbart Harold, ed. Cam design handbook. New York: McGraw-Hill, 2004.
Find full textAutomotive Industry in Expanding Countries Conference (1991 Buenos Aires, Argentina). Automotive Industry in Expanding Countries Conference proceedings. Warrendale, PA: Society of Automotive Engineers, 1991.
Find full text