Dissertations / Theses on the topic 'Automated testing system'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Automated testing system.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Coffman, Thayne R. (Thayne Richard). "A framework for automated system testing." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/40188.
Full textIncludes bibliographical references (leaves 70-73).
by Thayne R. Coffman.
M.Eng.
Rotting, Tjädermo Viktor, and Alex Tanskanen. "System Upgrade Verification : An automated test case study." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-165125.
Full textBergström, Kristoffer. "Sensor system for automated circuit board testing." Thesis, Uppsala universitet, Signaler och System, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388628.
Full textMARSH, TED A. "AN AUTOMATED TESTING SYSTEM FOR A TELEMETRY TRACKING SYSTEM." International Foundation for Telemetering, 1991. http://hdl.handle.net/10150/613114.
Full textWhite Sands Missile Range (WSMR) has developed an Advanced Transportable Telemetry Acquisition System (TTAS-A) which utilizes a dedicated computer system for antenna control. The Automated Testing System (ATS), an integral part of this system, is the subject of this paper. The ATS consists of hardware and software designed to provide fully automated testing of the radio frequency (RF) and servo subsystems for validation purposes. The RF subsystem tests are designed to evaluate, measure, and display RF performance parameters such as receiving system Figure of Merit and RF system sensitivity. The servo subsystem tests are designed to evaluate and display the stability and response characteristics of the servo subsystem. Tests are accessed via a keyboard, and extensive use of menus makes the software easy to learn and use. The test equipment is controlled entirely by the computer, and hard copies of all test results are available on the system printer.
Pietschker, Andrej. "Automated test generation from algebraic specifications." Thesis, University of Newcastle Upon Tyne, 2002. http://hdl.handle.net/10443/2015.
Full textHaque, Ehsanul. "An Automated Multi-agent Framework For Testing Distributed System." OpenSIUC, 2013. https://opensiuc.lib.siu.edu/theses/1107.
Full textAndersson, Johan, and Katrin Andersson. "Automated Software Testing in an Embedded Real-Time System." Thesis, Linköping University, Department of Computer and Information Science, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-9772.
Full textToday, automated software testing has been implemented successfully in many systems, however there does still exist relatively unexplored areas as how automated testing can be implemented in a real-time embedded system. This problem has been the foundation for the work in this master thesis, to investigate the possibility to implement an automated software testing process for the testing of an embedded real-time system at IVU Traffic Technologies AG in Aachen, Germany.
The system that has been the test object is the on board system i.box.
This report contains the result of a literature study in order to present the foundation behind the solution to the problem of the thesis. Questions answered in the study are: when to automate, how to automate and which traps should one avoid when implementing an automated software testing process in an embedded system.
The process of automating the manual process has contained steps as constructing test cases for automated testing, analysing whether an existing tool should be used or a unique test system needs to be developed. The analysis, based on the requirements on the test system, the literature study and an investigation of available test tools, lead to the development of a new test tool. Due to limited devlopement time and characterstics of the i.box, the new tool was built based on post execution evaluation. The tool was therefore divided into two parts, a part that executed the test and a part that evaluated the result. By implementing an automated test tool it has been proved that it is possible to automate the test process at system test level in the i.box.
Tlemcani, Ismail. "SYSTEM-LEVEL AUTOMATED TESTING FOR HOME DIGITAL VOICE ASSISTANTS." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-51050.
Full textShrivatri, Ankit. "Selection and implementation of test framework for automated system test of mobile application." Master's thesis, Universitätsbibliothek Chemnitz, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-202553.
Full textMeredith, Mark S. "The Consolidated Automated Support System (CASS): A comparative evaluation." Thesis, Monterey, California : Naval Postgraduate School, 1990. http://handle.dtic.mil/100.2/ADA238002.
Full textThesis Advisor(s): McMasters, Alan W. ; Moore, Thomas P. "June 1990." Description based on title screen as viewed on October 19, 2009. DTIC Indicator(s): Test equipment, Automatic, Problem solving, Logistics support, Aircraft maintenance, Naval aircraft, Theses. Author(s) subject terms: Automatic Test Equipment, ATE, Consolidated Automated Support System, CASS, avionics testing. Includes bibliographical references (p. 111-115). Also available online.
Saadat, Huzaifa. "Design and development of an automated regression test suite for UEFI." Master's thesis, Universitätsbibliothek Chemnitz, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-159277.
Full textAnsariramandi, Saeed. "Automated Debugging in a Trading System." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-90331.
Full textPalmieri, Manuel. "System Testing in a Simulated Environment." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-18701.
Full textHeywood, James K. "AUTOMATED TESTING OF THE ADVANCED DATA ACQUISITION AND PROCESSING SYSTEM." International Foundation for Telemetering, 2001. http://hdl.handle.net/10150/606456.
Full textSoftware and techniques are described for testing the Advanced Data Acquisition and Processing System (ADAPS), the primary flight test telemetry system used at Edwards AFB, California. The software described acts as an additional simulation capability and moves the simulation definition process into a realm where data is formed by means of a high-order language. The potential for creation of more sophisticated simulated test data is thus enabled. Extension of the techniques described in this paper to applications other than testing is discussed.
Lindgren, Jonas. "Analysis of requirements for an automated testing and grading assistance system." Thesis, Linköpings universitet, Datorteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-105692.
Full textFramläggningen redan avklarad.
Vargo, Timothy D. "RAPIDLY ADAPTABLE INSTRUMENTATION TESTER (RAIT)." International Foundation for Telemetering, 1999. http://hdl.handle.net/10150/608439.
Full textEmerging technologies in the field of "Test & Measurement" have recently enabled the development of the Rapidly Adaptable Instrumentation Tester (RAIT). Based on software developed with LabVIEW®, the RAIT design enables quick reconfiguration to test and calibrate a wide variety of telemetry systems. The consequences of inadequate testing could be devastating if a telemetry system were to fail during an expensive flight mission. Supporting both open-bench testing as well as automated test sequences, the RAIT has significantly lowered total time required to test and calibrate a system. This has resulted in an overall lower per unit testing cost than has been achievable in the past.
Musah, Arthur. "An automated bench testing system for direct current parameters of instrumentation amplifiers." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/33328.
Full textIncludes bibliographical references (p. 92-93).
Electrical testing is performed at multiple stages in the production of analog integrated circuits (ICs). An efficient system for low-volume IC testing is one that automates bench tests and provides good measurement precision and accuracy, while costing far less than the standard automated test equipment (ATE) used for high-volume manufacturing purposes. This thesis describes the design and implementation of an automated bench system for measuring the important direct current parameters associated with analog instrumentation amplifiers: voltage offset, input bias currents, input offset current, output swing, common mode rejection, power supply rejection, quiescent current and gain error. The system is developed on the PXI platform and consists of measurement and signal generating hardware modules, a Windows-based computer, a resource printed circuit board (PCB), a test-configuration PCB and LabVIEW-based software. The system is versatile and supports the testing of different instrumentation amplifier types and pin- outs. The performance of the system is characterized with respect to ATE results for the Texas Instruments instrumentation amplifier INA 126.
by Arthur Musah.
M.Eng.
Hoffmaster, Andrew L. "An Automated System for Seed Vigor Testing Three-Day-Old Soybean Seedlings." The Ohio State University, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=osu1377872760.
Full textByström, Markus. "Design and realisation of an automated software testing system utilizing virtual machines." Thesis, KTH, Skolan för datavetenskap och kommunikation (CSC), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-154480.
Full textModern software is often run in many different environments which puts high demands on testing and quality assurance. Continuous testing of software during the software development cycle is necessary in order to ensure the compatibility between the software and the different environments or platforms in which the software is used. This may require signicant resources in the form of man hours for testers and hardware availability. By testing in virtual environments it is possible to automate most of this process in an easy way and thus make testing more efficient. In this master thesis an automated test system utilizing virtual machines was designed, implemented and evaluated for Scania at its department for Diagnostic Communication and Software Download, RESC. The implemented test system enabled regression and installation testing of the software component SCOMM, Scania Communication Module, to be performed on all the supported platforms on a daily basis. Some minor difficulties were experienced such as some versions of the Windows operating system behaving differently regarding to permissions and operation and also that despite the low overhead of the virtual machine some timing issues were noticed in a few test cases which led them to intermittently fail. By testing software in different operating systems in parallel, it was possible todo more testing in less time than before. Testing reliability was increased due to every test starting from a known state of the virtual machines. The time spent on setup and maintenance of the testing environment can be decreased since multiple virtual machines can co-exist on one physical machine.
Erdahl, Dathan S. (Dathan Shane). "Design and implementation of an automated solder joint inspection system." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/19654.
Full textSazonov, Eduard S. "An automated damage detection system for armoured vehicle launched bridge." Morgantown, W. Va. : [West Virginia University Libraries], 2002. http://etd.wvu.edu/templates/showETD.cfm?recnum=2497.
Full textTitle from document title page. Document formatted into pages; contains xi, 187 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 148-154).
Durand, William. "Automated test generation for production systems with a model-based testing approach." Thesis, Clermont-Ferrand 2, 2016. http://www.theses.fr/2016CLF22691/document.
Full textThis thesis tackles the problem of testing (legacy) production systems such as those of our industrial partner Michelin, one of the three largest tire manufacturers in the world, by means of Model-based Testing. A production system is defined as a set of production machines controlled by a software, in a factory. Despite the large body of work within the field of Model-based Testing, a common issue remains the writing of models describing either the system under test or its specification. It is a tedious task that should be performed regularly in order to keep the models up to date (which is often also true for any documentation in the Industry). A second point to take into account is that production systems often run continuously and should not be disrupted, which limits the use of most of the existing classical testing techniques. We present an approach to infer exact models from traces, i.e. sequences of events observed in a production environment, to address the first issue. We leverage the data exchanged among the devices and software in a black-box perspective to construct behavioral models using different techniques such as expert systems, model inference, and machine learning. It results in large, yet partial, models gathering the behaviors recorded from a system under analysis. We introduce a context-specific algorithm to reduce such models in order to make them more usable while preserving trace equivalence between the original inferred models and the reduced ones. These models can serve different purposes, e.g., generating documentation, data mining, but also testing. To address the problem of testing production systems without disturbing them, this thesis introduces an offline passive Model-based Testing technique, allowing to detect differences between two production systems. This technique leverages the inferred models, and relies on two implementation relations: a slightly modified version of the existing trace preorder relation, and a weaker implementation proposed to overcome the partialness of the inferred models.Overall, the thesis presents Autofunk, a modular framework for model inference and testing of production systems, gathering the previous notions. Its Java implementation has been applied to different applications and production systems at Michelin, and this thesis gives results from different case studies. The prototype developed during this thesis should become a standard tool at Michelin
Bozkurt, M. "Automated realistic test input generation and cost reduction in service-centric system testing." Thesis, University College London (University of London), 2013. http://discovery.ucl.ac.uk/1400300/.
Full textYuan, Jessica. "Monitoring interface and automated testing for Seaweed, a web-based economic game system." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/61583.
Full textCataloged from PDF version of thesis.
Includes bibliographical references (p. 47-49).
Seaweed is a web-based economic game system that allows end users to design and deploy simple two-player economic games. To improve the usability of the system, we have created two new features. One: a monitoring interface that allows users to view the results of a game deployment in real time. Two: an automated testing feature that automatically generates play data for a game, so that the user can check that the results are correct. Challenges included condensing the data of multiple plays of a game into a readable format and modifying the computer player system to pit two computer players against each other in order to generate the test data.
by Jessica Yuan.
M.Eng.
Zeltner, Wolff Johannes. "Development of software for MALTE, a system for automated testing of line current supervision andinterference monitoring devices." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-243639.
Full textSharp, Phillip D. "ADVANCED TELEMETRY TRACKING SYSTEM DEVELOPMENT AT WHITE SANDS MISSILE RANGE." International Foundation for Telemetering, 1991. http://hdl.handle.net/10150/613057.
Full textEarly in the 1980s White Sands Missile Range (WSMR) began studying the problem of updating the Telemetry Tracking Systems (TTS) used to support test range missions. The information and equipment available at that time indicated that very little technology advancement had occurred in the area of TTS. Because the TTS usually have a long service life, it was imperative that the new or updated systems be as good as the state-of-the-art in todays technology could produce. Because of the lack of technology advancements, it was evident that drastic measures would be required to achieve the objectives of the update effort. These findings resulted in a program called the Advanced Telemetry Tracking System Integration and Development (ATTSID). Its objective was to determine if it was possible to apply advanced computer technology to the solution of servosystem problems characteristic in most TTS. This paper and three related papers, The Advanced Telemetry Tracking Servosystem; An Automated Testing System for a Telemetry Tracking System; and The Microcomputer-based Digital Controller for the Advanced Telemetry Tracking System; document the objectives, design considerations, fabrication and evaluation of a prototype TTS. It utilizes a dedicated computer system to control, compensate the servo position loop, and provide automated testing of the servo and RF receiving systems. This computer system was installed and evaluated in one of the WSMR Transportable Telemetry Acquisition Systems (TTAS) for evaluation and refinement of the system. The results of this program will determine the evolution of TTS and extend the use of computer technology to providing more reliable and accurate telemetry tracking support of test range operations.
Jiang, Zhengyi. "Design, development and testing of an automated system for measuring wall thicknesses in turbine blades with cooling channels." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/design-development-and-testing-of-an-automated-system-for-measuring-wall-thicknesses-in-turbine-blades-with-cooling-channels(895ac153-e310-40e2-87c6-4e40654c9d5d).html.
Full textMyburgh, W. D. "Development of a tool to test computer protocols." Thesis, Stellenbosch : Stellenbosch University, 2003. http://hdl.handle.net/10019.1/53363.
Full textENGLISH ABSTRACT: Software testing tools simplify and automate the menial work associated with testing. Moreover, for complex concurrent software such as computer protocols, testing tools allow testing on an abstract level that is independent of specific implementations. Standard conformance testing methodologies and a number of testing tools are commercially available, but detailed descriptions of the implementation of such testing tools are not widely available. This thesis investigates the development of a tool for automated protocol testing in the ETH Oberon development environment. The need to develop a protocol testing tool that automates the execution of specified test cases was identified in collaboration with a local company that develops protocols in the programming language Oberon. Oberon is a strongly typed secure language that supports modularisation and promotes a readable programming style. The required tool should translate specified test cases into executable test code supported by a runtime environment. A test case consists of a sequence of input actions to which the software under test is expected to respond by executing observable output actions. A number of issues are considered of which the first is concerned with the representation of test case specifications. For this, a notation was used that is basically a subset of the test specification language TTCN-3 as standardised by the European Telecommunications Standards Institute. The second issue is the format of executable test cases and a suitable runtime environment. A translator was developed that generates executable Oberon code from specified test cases. The compiled test code is supported by a runtime library, which is part of the tool. Due to the concurrent nature of a protocol environment, concurrent processes in the runtime environment are identified. Since ETH Oberon supports multitasking in a limited sense, test cases are executed as cooperating background tasks. The third issue is concerned with the interaction between an executing test case and a system under test. It is addressed by an implementation dependent interface that maps specified test interactions onto real interactions as required by the test context in which an implementation under test operates. A supporting protocol to access the service boundary of an implementation under test remotely and underlying protocol service providers are part of a test context. The ETH Oberon system provides a platform that simplifies the implementation of protocol test systems, due to its size and simple task mechanism. Operating system functionality considered as essential is pointed out in general terms since other systems could be used to support such testing tools. In conclusion, directions for future work are proposed.
AFRIKAANSE OPSOMMING: Toetsstelsels vir programmatuur vereenvoudig en outomatiseer die slaafse werk wat met toetsing assosieer word. 'n Toetsstelsel laat verder toe dat komplekse gelyklopende programmatuur, soos rekenaarprotokolle, op 'n abstrakte vlak getoets word, wat onafhanklik van spesifieke implementasies is. Daar bestaan standaard metodes vir konformeringstoetsing en 'n aantal toetsstelsels is kommersiëel beskikbaar. Uitvoerige beskrywings van die implementering van sulke stelsels is egter nie algemeen beskikbaar nie. Hierdie tesis ondersoek die ontwikkeling van 'n stelsel vir outomatiese toetsing van protokolle in die ontwikkelingsomgewing van ETH Oberon. Die behoefte om 'n protokoltoetsstelsel te ontwikkel, wat die uitvoering van gespesifiseerde toetsgevalle outomatiseer, is geïdentifiseer in oorleg met 'n plaaslike maatskappy wat protokolle ontwikkel in die Oberon programmeertaal. Oberon is 'n sterkgetipeerde taal wat modularisering ondersteun en a leesbare programmeerstyl bevorder. Die toestsstelsel moet gespesifiseerde toetsgevalle vertaal na uitvoerbare toetskode wat ondersteun word deur 'n looptydomgewing. 'n Toetsgeval bestaan uit 'n reeks van toevoeraksies waarop verwag word dat die programmatuur wat getoets word, sal reageer deur die uitvoering van afvoeraksies wat waargeneem kan word. 'n Aantal kwessies word aangeraak, waarvan die eerste te make het met die voorstelling van die spesifikasie van toetsgevalle. Hiervoor is 'n notasie gebruik wat in wese 'n subversameling van die toetsspesifikasietaal TTCN-3 is. TTCN-3 is gestandardiseer deur die European Telecommunications Standards Institute. Die tweede kwessie is die formaat van uitvoerbare toetsgevalle en 'n geskikte looptydomgewing. 'n Vertaler is ontwikkel wat uitvoerbare Oberon-kode genereer vanaf gespesifiseerde toetsgevalle. Die vertaalde toetskode word ondersteun deur 'n biblioteek van looptydfunksies, wat deel van die stelsel is. As gevolg van die eienskap dat 'n protokolomgewing uit gelyklopende prosesse bestaan, word daar verskillende tipes van gelyklopende prosesse in 'n protokoltoetsstelsel geïdentifiseer. Aangesien ETH Oberon 'n beperkte multitaakstelsel is, word toetsgevalle vertaal na eindige outomate wat uitgevoer word as samewerkende agtergrondtake. Die derde kwessie het te make met die interaksie tussen 'n toetsgeval wat uitgevoer word en die stelsel wat getoets word. Dit word aangespreek deur 'n koppelvlak wat gespesifiseerde interaksies afbeeld op werklike interaksies soos vereis deur die konteks waarin 'n implementasie onderworpe aan toetsing uitvoer. 'n Ondersteunende protokolom die dienskoppelvlak van die implementasie oor 'n afstand te bereik en ander onderliggende protokoldienste is deel van 'n toetskonteks. Die ETH Oberon-stelsel help in die vereenvoudiging van die implementasie van protokol toetsstelsels, as gevolg van die stelsel se grootte en die eenvoudige taakhanteerder . Die essensiële funksionaliteit van bedryfsstelsels word uitgelig in algemene terme omdat ander stelsels gebruik kan word om toetsstelsels te ondersteun. Ten slotte word voorstelle vir opvolgwerk gemaak.
Idris, Asil. "Comparison of GUI test automation strategies in a Clearing System : A case study at Nasdaq Stockholm AB." Thesis, Högskolan Dalarna, Institutionen för information och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:du-37600.
Full textAmlinger, Hanna. "Application of a New Software Tool for the Automated Test of Automotive Electronic Control Unit Software." Thesis, Linköping University, Department of Electrical Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-16785.
Full textTesting plays a very important role for assuring the quality of developed software. In a modern vehicle, more and more of the functionality is controlled by software and the complexity of the software always increases. The expectations on automating the testing process are to save time and to reach an even higher quality.
In this thesis, which was performed at ZF Friedrichshafen AG, a new tool for automated tests is studied. The tool is used for software in the loop simulation based system tests. The user specifies which outputs that shall be observed and which inputs that can be controlled. Based on these prerequisites, test cases are generated.
It has been studied how to apply the tool, how the test case generation can be influenced, on which systems it successfully could be used and which results that could be reached with the tool. The tool has been evaluated on the hand of two real-life examples; the software of an automatic transmission and of a pressure controller, a module of this software. It was found that there are many interesting possibilities to apply the tool in order to support the present testing process.
Oudrnický, Jan. "Automatizované testování aplikace pro IP televizi." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-85231.
Full textSinaci, Ali Anil. "A Conformance And Interoperability Test Suite For Turkey." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12610677/index.pdf.
Full textBiTAK TEYDEB Project No: 7070191 in addition by the Ministry of Health, Turkey.
Lindstrom, Zachary Kendall. "Design and Experimental Testing of Nanoinjection Protocols for Delivering Molecules into HeLa Cells with a Bio-MEMS Device." BYU ScholarsArchive, 2014. https://scholarsarchive.byu.edu/etd/4035.
Full textNarasimhan, Ramakrishnan Akshra. "Design and Evaluation of Perception System Algorithms for Semi-Autonomous Vehicles." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1595256912692618.
Full textБєй, Олександр Вікторович. "Система автоматизації процесів тестування програмного забезпечення з використанням паралелізації тестів." Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/25514.
Full textIn the master's thesis was developed the system of software testing processes automation with the use of parallelization of tests. The purpose of this work was to create a system for automatically verifying the functionality of the tested object with a user-friendly error-handling interface. In accordance with the stated goal, the system of automation of software testing processes was developed and tested with the use of parallel tests. In the dissertation the structural scheme, the sequence diagram, the diagram of variants of use, the algorithm of system operation and others are developed. The paper considers the features of some tools for testing automation and successfully used in practice. Considerable attention in the work is devoted to the development of a framework for testing, thanks to which the speed of writing automated tests greatly increases. At the same time, the scheme of work of the system and the working program in the Java language was developed. The results of this simulation confirmed the reliability of the theoretical information. The work may be useful for companies aimed at developing the testing direction, automating the testing process and improving the quality of their product, since the paper describes the necessary theoretical foundations, moreover, analyzes the criteria for the effectiveness of the testing process. The work contains 100 s. text, 49 drawings, 20 literary sources and 3 appendices.
В магистерской диссертации разработана система автоматизации процессов тестирования программного обеспечения с использованием параллелизация тестов. Целью данной работы было создание системы для автоматической проверки функционала тестируемого объекта с удобным интерфейсом вывода ошибок. Согласно поставленной цели была разработана и протестирована система автоматизации процессов тестирования программного обеспечения с использованием параллелизация тестов. В диссертации разработаны структурная схема, схема последовательности, диаграмма вариантов использования, алгоритм работы системы и другие. В работе рассмотрены особенности некоторых инструментов для автоматизации тестирования и успешно использовании на практике. Значительное внимание в работе уделено разработке фреймворка для тестирования, благодаря которому скорость написания автоматизированных тестов значительно возрастает. При этом была разработана схема работы системы и рабочую программу на языке Java. Результаты этого моделирования подтвердили достоверность теоретических сведений. Работа может быть полезна для компаний, нацеленных на развитие направления тестирования, автоматизации процесса тестирования и повышения качества своего продукта, поскольку в работе описаны необходимые теоретические основы, более того, проанализированы критерии эффективности процесса тестирования.
Ekström, Per, and Elisabeth Eriksson. "REDUNDANT FIRMWARE TEST SETUP IN SIMULATION AND HARDWARE: A FEASIBILITY STUDY." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-40057.
Full textWächter, Thomas. "Semi-automated Ontology Generation for Biocuration and Semantic Search." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-64838.
Full textHalvarsson, Hampus. "Automated Testing of HVDC Control & Protection Systems : A study on Automated Regression Testing." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-369130.
Full textNovák, Milan. "Automatický obchodní systém na trzích CFD." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2014. http://www.nusl.cz/ntk/nusl-224708.
Full textJain, Arnav. "Automated Testing of HVDC Control & Protection Systems A study on Automated Regression Testing." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-356157.
Full textBrännström, Gustaf. "Automated software testing for cross-platform systems." Thesis, Umeå universitet, Institutionen för datavetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-56327.
Full textHolm, Oscar. "Improving the Development of Safety Critical Software : Automated Test Case Generation for MC/DC Coverage using Incremental SAT-Based Model Checking." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-161335.
Full textBezděk, Petr. "Investiční modely v prostředí finančních trhů." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2016. http://www.nusl.cz/ntk/nusl-234818.
Full textAndersson, Sebastian, and Gustav Carlstedt. "Automated Testing of Robotic Systems in Simulated Environments." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-44572.
Full textNečas, Radek. "Systém pro kontinuální integraci projektu k-Wave." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2016. http://www.nusl.cz/ntk/nusl-255473.
Full textTienaho, Marjaana, and Jesus Barrio. "Automated testing in changeable systems -Techniques to support modifications." Thesis, Blekinge Tekniska Högskola, Avdelningen för programvarusystem, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2585.
Full textMarjaana Tienaho E-mail: Marjaana_tienaho@spray.se Jesús Barrio E-mail: jesus_barrio@hotmail.com E-mail: jesus_barrio@hotmail.com
Fedor, Denis. "SW pro ovládání klimatických zkoušek." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316374.
Full textNilsson, Robert. "A Mutation-based Framework for Automated Testing of Timeliness." Doctoral thesis, Linköping : Department of Computer and Information Science, Linköping University, 2006. http://www.bibl.liu.se/liupubl/disp/disp2006/tek1030s.pdf.
Full textGustafsson, Joakim. "AUTOMATIC BRAKING DISC ANALYSIS SYSTEM." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-28217.
Full textShtakova, Maryna. "Evaluation of methods for automated testing in large-scale financial systems." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-176748.
Full text