Relevant bibliographies by topics / Aqueous and non-aqueous

Academic literature on the topic 'Aqueous and non-aqueous'

Author: Grafiati
Published: 18 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aqueous and non-aqueous.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aqueous and non-aqueous"

1

Majidzade, V. A. "ELECTROREDUCTION OF THIOSULPHATE IONS FROM NON-AQUEOUS SOLUTIONS." Azerbaijan Chemical Journal, no. 2 (June 18, 2020): 61–66. http://dx.doi.org/10.32737/0005-2531-2020-2-61-66.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Voronina, Yuliya, Yuliya Krylova, and Anastasiya Tereshko. "Development of aqueous phase formulation for non-toxic paints." From Chemistry Towards Technology Step-By-Step 4, no. 2 (June 23, 2023): 77–81. http://dx.doi.org/10.52957/2782-1900-2024-4-2-77-81.

Full text
Abstract:
The paper presents a well-proven formulation for the production of aqueous phase for non-toxic paints. The authors investigated the rheological properties of the aqueous phase depending on the ratio of the components. The authors studied the effect of a thickener (FLOGEL 700) on the rheological characteristics of the aqueous phase and estimated the best pH value of the aqueous phase
APA, Harvard, Vancouver, ISO, and other styles
3

Ashokkumar, Muthupandian, and Franz Grieser. "Sonophotoluminescence from aqueous and non-aqueous solutions." Ultrasonics Sonochemistry 6, no. 1-2 (March 1999): 1–5. http://dx.doi.org/10.1016/s1350-4177(98)00038-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dordick, Jonathan S. "Non-aqueous enzymology." Current Opinion in Biotechnology 2, no. 3 (June 1991): 401–7. http://dx.doi.org/10.1016/s0958-1669(05)80146-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Quitmeyer, Joann. "pH Measurement in aqueous and non-aqueous solutions." Metal Finishing 106, no. 10 (October 2008): 21–24. http://dx.doi.org/10.1016/s0026-0576(08)00036-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Marcus, Yizhak. "Tetraalkylammonium Ions in Aqueous and Non-aqueous Solutions." Journal of Solution Chemistry 37, no. 8 (June 6, 2008): 1071–98. http://dx.doi.org/10.1007/s10953-008-9291-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Huang, Jianhang, Xiaoli Dong, Nan Wang, and Yonggang Wang. "Building low-temperature batteries: Non-aqueous or aqueous electrolyte?" Current Opinion in Electrochemistry 33 (June 2022): 100949. http://dx.doi.org/10.1016/j.coelec.2022.100949.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sirén, Heli, Tarja Hiissa, and Yuan Min. "Aqueous and non-aqueous capillary electrophoresis of polar drugs." Analyst 125, no. 9 (2000): 1561–68. http://dx.doi.org/10.1039/a910305h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Callaghan, I. C., F. T. Lawrence, and P. M. Melton. "An equation describing aqueous and non-aqueous foam collapse." Colloid & Polymer Science 264, no. 5 (May 1986): 423–34. http://dx.doi.org/10.1007/bf01419546.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tager, A. A., and A. P. Safronov. "Complexing in aqueous and non-aqueous solutions of polyvinylazoles." Polymer Science U.S.S.R. 33, no. 1 (January 1991): 66–73. http://dx.doi.org/10.1016/0032-3950(91)90271-q.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Aqueous and non-aqueous"

1

Arslanargin, Ayse. "Ion solvation in aqueous and non-aqueous solvents." University of Cincinnati / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1439281594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bakri, Ridla. "Non-aqueous polyvanadate chemistry." Thesis, University of Newcastle Upon Tyne, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242366.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Seguin, Caroline Michèle Pascale. "Surfactant behavior in aqueous and non-aqueous glycol solvent mixtures." Thesis, University of Bristol, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.439959.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dave, Hiteshkumar Rajeshkumar. "Self Assembly In Aqueous And Non-aqueous Sugar-Oil Mixtures." University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1229737030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Movaghgharnezhad, Shirin. "Electrodeposition of CuGaS2 from Aqueous and Non-aqueous Electrolyte Mixtures." OpenSIUC, 2017. https://opensiuc.lib.siu.edu/theses/2251.

Full text
Abstract:
Shirin Movaghgharnezhad for the master of science degree in mechanical engineering, presented on November 6, 2017, at Southern Illinois University Carbondale. TITLE: Electrodeposition of CuGaS2 from Aqueous and Non-Aqueous Electrolyte Mixtures MAJOR PROFESSOR: Dr. Ian I. Suni Electrodeposition of CuGaS2 from aqueous and non-aqueous electrolyte mixtures is reported in this work. Acetonitrile complexation is used to shift the reduction potential of Cu (II) in the cathodic direction. With the presence of 50% acetonitrile, the difference between the peak reduction currents of Cu (II) and Ga (III) during cyclic voltammetry is only 140 mV, whereas the standard reduction potentials of the individual components in aqueous electrolytes differ by 870 mV. When all components are present in the electrolyte, a new reduction peak obtained in cyclic voltammograms at −260 mV and pH 2.7 that is anodically shifted relative to the cathodic peaks when only one component is present. According to the composition, and morphology analysis at deposition potential -260 mV vs. Ag/AgCl for 15 minutes from aqueous and non-aqueous solutions of 10 mM Ga(NO3)3, 0.5 CuSO4, 1 mM Na2S, 100 mM LiClO4 and a 50-50 mixture of water and acetonitrile at pH 2.7 was found to be the optimum condition to obtain stoichiometric CuGaS2 thin films. In addition, oxygen incorporation in the electrodeposit is observed, because electrodeposition of stoichiometric CuGaS2 appears to be immediately followed by Ga oxidation. The sample were annealed at temperature 300°C in Ar atmosphere for 2 hours to improve crystallinity and reduce the extent of oxidation. Thin film analysis by EDX, top-view SEM, and also cross-sectional SEM were also performed to determine the elemental ratio of Cu:Ga:S, thin film morphology, and thin film thickness, respectively. This material has potential application in solar cells. The EDX analysis of copper gallium sulfide thin films at different potentials and different gallium solution phase concentration were also performed.
APA, Harvard, Vancouver, ISO, and other styles
6

Banerjee, Ashis. "Rheological and thermodynamic investigation of some properties prevailing in aqueous and non-aqueous system." Thesis, University of North Bengal, 2009. http://hdl.handle.net/123456789/1357.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Johnson, Anthony. "Aqueous & non-aqueous phase tracer migration through differing soil textures." Thesis, University of Plymouth, 2004. http://hdl.handle.net/10026.1/2212.

Full text
Abstract:
The National Grid Transco Company sponsored this project in order to promote the understanding of NAPL migration through b-horizon soils and retarding effects upon non aqueous species migration. Soil structure and texture was also studied using conservative (Bromide) and non-conservative (Phosphate) tracers. Experimental data was produced using a laboratory ½ metre scale automated lysimeter designed and constn1cted at Plymouth. The tracers were compared before oil injection, to calibrate differences in soil texture, and after oil injection to detect any changes in the flow patterns caused by the oil injection. It was found that the Crediton, Sollom and Conway soils respectively offered least resistance to the tracers with the non-conservative tracer behaving much more unpredictably than the conservative tracer. After oil injection it could be seen that the oil had heavily retarded the ability of the tracers to migrate from the injection site. This retardation was identified as analogous to perturbations of the soil structure. Statistical analysis of the data showed that the experiments were all internally self consistent and visible patterns could be seen in the corrected data caused by inclusion of oil in the injection site. Methods of dispersal for the oil and tracer are suggested in the concluding chapter with references to the work of previous authors. Development of a hazard assessment framework was facilitated by the simulation of soil structures using a pedo transfer function developed at the National Soils Resource Institute. To allow the modelling of soils the Pore-Cor software had an annealed simplex algorithm integrated into the data inversion engine to allow the simulation of 3-D soil structures using 2-D data from pedo transfer functions or experimentally derived water retention curves. An extensive sensitivity analysis upon the model highlighted limitations, due to the data set the current pedo transfer function is based upon. It was suggested that inclusion of choices of different pedo transfer functions could be used to overcome this problem. A suitable framework was derived for the identification of priority soils using a validated computer model. Experimental data was compared to the simulated data in order to try and develop an understanding of practical upscaling of the data. The use of the "Scaleway" method is discussed in the concluding Chapter.
APA, Harvard, Vancouver, ISO, and other styles
8

Dixon, S. M. "Lyoluminescence of irradiated organic compounds in aqueous and non-aqueous solvents." Thesis, University of Aberdeen, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.377610.

Full text
Abstract:
Lyoluminescence (LL) of the phosphors glutamine and mannose was used to determine instrument stability, reproducibility of readings, sensitivity and lowest detectable dose in order to evaluate the performance of the Aberdeen LL Research Reader (before and after modifications) and compare it with commercially available luminometers. The dependence of the LL yield on mass of dissolved glutamine, the sample's irradiation temperature, and solvent temperature were investigated and correction factors determined. Heat treatment was found to remove the dependence on pre- and post-irradiation storage time. Using aqueous LL dosimetry of glutamine, unknown doses in the range 10Gy to 3kGy were determined with overall accuracy and precision of 2% and 5% respectively during the 1982 IAEA Dose Intercomparison trials. Factors affecting the LL of mannose in water and methanol were compared, and a 20-fold increase in LL yield was reported using the latter solvent. Various attempts to enhance the LL yield from glutamine and mannose were made: Enhancements, of up to 105 times, caused by the oxidation of luminol, lucigenin, lophine and trichlorophenol oxalate by the primary species in LL were observed, but increased background readings due to self-glow caused there to be no advantage in overall sensitivity. Enhancement factors (EF) up to 100 were obtained using glutamine LL in free and chelated rare earth ion solutions, as a result of intermolecular energy transfer from excited organic molecules in solution. However, the enhancement was found to be dose dependent. By employing dibromoanthracene sulphonate, rubrene, eosin and reduced lucigenin, all of which respond to singlet oxygen, EF of up to 10 were achieved in LL of mannose. Finally, as the use of aqueous solutions was found to severely limit the possible phosphor/enhancer combinations, the LL of some carboxylic acids in alcoholic media was investigated. These were found to be less sensitive LL phosphors than either mannose or glutamine.
APA, Harvard, Vancouver, ISO, and other styles
9

Rajaeian, Babak. "Synthesis of polymeric nanocomposite membranes for aqueous and non-aqueous media." Thesis, Curtin University, 2012. http://hdl.handle.net/20.500.11937/410.

Full text
Abstract:
Thin film composite (TFC) membranes have long been used by many large-scale applications (i.e., water and wastewater treatment). Recently, conventional polymeric TFC membranes are facing with short longevity due to high fouling tendency and susceptibility at extreme operational conditions. On the other hand, ceramic membranes are also suffering from disadvantages like low selectivity, unreliable control over porosity and pore size which makes it difficult to achieve a reproducible final product. The aim of this project was to develop a high selective TFC membranes incorporated by functionalized TiO2 nanoparticles for aqueous and nonaqueous media applications.In order to obtain high permeable aromatic polyamide thin film nanocomposite (TFN) nanofiltration membrane, the conventional interfacial polymerization (IP) reaction was applied as the embedding media for functionalized nanoparticles. For this purpose, TFN nanofiltration membrane with appropriate structural and separation properties was developed by dispersing the aminosilanized TiO2 nanoparticles inside the diamine monomer and polymerizing the monomer in the presence of these particles. Surface-modified ceramic substrate was used to obtain high mechanical resistant composite membrane. Results from spectrometry analyses represent that the silane coupling agent called AAPTS has been successfully grafted onto the external surface of TiO2 after the chemical modification. Upon incorporation of TiO2 nanoparticles, thermal stability of nanocomposite is significantly improved in comparison with TFC membrane. Morphological investigations prove that the functionalized TiO2 nanoparticles could effectively change the surface properties and roughness of NF membranes. Performance results show that ultra-low concentration (0.005 wt%) of amine functionalized TiO2 nanoparticles improves the salt rejection as well as water flux. Flux can be further improved by the incorporation of higher percentage of the modified TiO2 into polymer membrane.In order to obtain nanofiltration membrane with high permeability and antifouling properties, TFN membrane was synthesised by dip-coating of a hydrophilized porous poly(vinylidene fluoride) (PVDF) support in different poly(vinyl alcohol) (PVA) aqueous solution. In order to improve the interfacial adhesion of nanoparticles in PVA blend, an endothermic carboxylation reaction under acidic condition was carried out on the TiO2 surface using chloroacetic acid (ClCH2COOH). Glutaraldehyde (GA) was used as a cross-linker to bond resultant PVA chains and enhances the stability of the coated PVA layer, accordingly. TiO2 nanoparticles were dispersed in PVA solution in pure and functionalized forms. Scanning electron microscopy (SEM) identified various topographies by the incorporation of TiO2 nanoparticles. Performance results showed a 40% rejection improvement of divalent salt (MgSO4) by the incorporation of 1.0 wt% surface-carboxylated TiO2 nanoparticles into PVA solution. A simultaneous 57% retention improvement was achieved for uncharged solute (PEG 2000). After PVA coating with TiO2 incorporation, the flux recovery ratio of PVDF membrane was significantly improved from 45 to 94%.In order to apply TFN membranes in non-aqueous media, a range of thin film nanocomposite solvent resistant nanofiltration membranes (SRNF) were fabricated by interfacial polymerization technique. TiO2 nanoparticles were used as inorganic fillers into polyamide chain network. TiO2 nanoparticles’ surfaces were functionalized in order to improve their compatibilization inside the polyamide matrix. For this purpose, Monoethanolamine (MEOA) and triethylenetetramine (TETA) agents were applied to aminate TiO2 nanoparticles, while thionyl chloride (TCl) was used to chlorinateation. Morphological investigations identified various topographies formed by the incorporation of TiO2 nanoparticles with different chemistry. Transport properties of membranes were evaluated by two different dyes: positively-charged Crystal Violet (CV) (408 Da) and neutral Bromothymol Blue (BTB) (624 Da). Performance results reveal that high rejection was achieved by the TFN membrane fabricated by TCl-modified TiO2 with BTB and CV rejection of 90 and 93%, respectively. These satisfactory rejection data for both charged and uncharged dyes can be attributed to formation of a dense structure after exposing the chlorinated TiO2 nanoparticles into interfacial polymerization reaction on membrane surfaces.
APA, Harvard, Vancouver, ISO, and other styles
10

Richards, D. G. "Non-aqueous chemistry of polyoxometalates." Thesis, University of Newcastle Upon Tyne, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.260951.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Aqueous and non-aqueous"

1

Non-aqueous solvents. Oxford: Oxford University Press, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hickey, Kenneth. A study of amides in aqueous and non-aqueous solution. Dublin: University College Dublin, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gupta, Munishwar Nath, ed. Methods in Non-Aqueous Enzymology. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tian, Hao, ed. Electrorheological fluids: The non-aqueous suspensions. Amsterdam: Elsevier, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Electroanalysis: Theory and applications in aqueous and non-aqueous media and in automated chemical control. Amsterdam: Elsevier, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vickers, Stephen Lee. Novel zinc and lithium non-aqueous batteries for low rate applications. Leicester: De Montfort University, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hillel, Rubin, Narkis Nava, and Carberry Judith B, eds. Soil and aquifer pollution: Non-aqueous phase liquids-- contamination and reclamation. Berlin: Springer-Verlag, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Interstate Technology and Regulatory Cooperation Work Group. DNAPLs/Chemical Oxidation Work Team. Dense non-aqueous phase liquids (DNAPLs): Review of emerging characterization and remediation technologies. United States]: ITRC, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

H, Illangasekare T., and Robert S. Kerr Environmental Research Laboratory, eds. An experimental evaluation of two sharp front models for vadose zone non-aqueous phase liquid transport. Ada, Okla: Robert S. Kerr Environmental Research Laboratory, Office of Research and Development, U.S. Environmental Protection Agency, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

F, Hepp Aloysius, and United States. National Aeronautics and Space Administration., eds. Room-temperature synthesis of CuInQ₂(Q=S or Se) in non-aqueous solution using an organoindium reagent. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Aqueous and non-aqueous"

1

Szumski, Michał, and Bogusław Buszewski. "Non-Aqueous Capillary Electrophoresis." In Springer Series in Chemical Physics, 203–13. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-35043-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Light, Jonathan Thomas. "Non-Aqueous Coolant Perspectives." In ASTM Symposium on Global Testing of Extended Service Engine Coolants and Related Fluids, 39–53. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2014. http://dx.doi.org/10.1520/stp155620130068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gores, Heiner Jakob, and Hans-Georg Schweiger. "Non-Aqueous Electrolyte Solutions." In Encyclopedia of Applied Electrochemistry, 1371–75. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4419-6996-5_442.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gupta, Munishwar N. "Non-Aqueous Enzymology: Issues and Persspectives." In Methods in Non-Aqueous Enzymology, 1–13. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chopineau, Joël, Bernard Lagoutte, Daniel Thomas, and Dominique Domurado. "Reversed Micelles as Microreactors: N-terminal Acylation of RNase A and its Characterization." In Methods in Non-Aqueous Enzymology, 160–73. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ramanathan, Kumaran, Birgitta Rees Jönsson, and Bengt Danielsson. "Analysis in Non-Aqueous Milieu Using Thermistors." In Methods in Non-Aqueous Enzymology, 174–94. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gupta, Munishwar Nath. "Importance of the Medium for in vitro and in vivo Protein Folding Mechanisms: Biomedical Implications." In Methods in Non-Aqueous Enzymology, 195–211. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Anthonsen, Thorleif, and Birte J. Sjursnes. "Importance of Water Activity for Enzyme Catalysis in Non-Aqueous Organic Systems." In Methods in Non-Aqueous Enzymology, 14–35. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fernández-Lorente, Gloria, Roberto Fernández-Lafuente, Pilar Armisén, Pilar Sabuquillo, Cesar Mateo, and José M. Guisán. "Engineering of Enzymes via Immobili-zation and Post-Immobilization Techniques: Preparation of Enzyme Derivatives with Improved Stability in Organic Media." In Methods in Non-Aqueous Enzymology, 36–51. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bosley, John A., and Alan D. Peilow. "Immobilization of Lipases for Use in Non-Aqueous Reaction Systems." In Methods in Non-Aqueous Enzymology, 52–69. Basel: Birkhäuser Basel, 2000. http://dx.doi.org/10.1007/978-3-0348-8472-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aqueous and non-aqueous"

1

Vazquez, Oscar, Eric James Mackay, and Kenneth S. Sorbie. "Modelling of Non-Aqueous and Aqueous Scale Inhibitor Squeeze Treatments." In International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 2007. http://dx.doi.org/10.2118/106422-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Buller, J., and J. F. Carpenter. "H2S Scavengers for Non-Aqueous Systems." In SPE International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 2005. http://dx.doi.org/10.2118/93353-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gupta, D. V. S., R. G. Pierce, and N. D. Lift. "Non-Aqueous Gelled Alcohol Fracturing Fluid." In International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 1997. http://dx.doi.org/10.2118/37229-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Vazquez, Oscar, Eric James Mackay, Khalfan Hamed Al Shuaili, Kenneth S. Sorbie, and Myles Martin Jordan. "Modelling a Surfactant Preflush with Non-Aqueous and Aqueous Scale Inhibitor Squeeze Treatments." In Europec/EAGE Conference and Exhibition. Society of Petroleum Engineers, 2008. http://dx.doi.org/10.2118/113212-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Guan, H., K. S. Sorbie, and E. J. Mackay. "The Comparison of Non-Aqueous and Aqueous Scale Inhibitor Treatments: Experimental and Modeling Studies." In SPE International Symposium on Oilfield Scale. Society of Petroleum Engineers, 2004. http://dx.doi.org/10.2118/87445-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Boyle, R. J., I. C. Finlay, T. Biddulph, and R. A. Marshall. "Heat Transfer to Non-Aqueous Engine Coolants." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/910304.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chaure, N. B. "CuInSe2 thin films by non-aqueous electrodeposition." In SOLID STATE PHYSICS: Proceedings of the 56th DAE Solid State Physics Symposium 2011. AIP, 2012. http://dx.doi.org/10.1063/1.4710388.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gupta, D. V. S., G. Niechwiadowicz, and A. C. Jerat. "CO2 Compatible Non-Aqueous Methanol Fracturing Fluid." In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2003. http://dx.doi.org/10.2118/84579-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Londhe, Priyanka U., Madhuri More, and N. B. Chaure. "Influence of capping agents on the growth of gold nanoparticles from aqueous and non-aqueous medium." In International Conference on Advanced Nanomaterials & Emerging Engineering Technologies (ICANMEET-2013). IEEE, 2013. http://dx.doi.org/10.1109/icanmeet.2013.6609301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chagas, Felipe, Paulo R. Ribeiro, and Otto L. A. Santos. "Well Control Simulation With Non-Aqueous Drilling Fluids." In ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-96736.

Full text
Abstract:
Abstract The demand for energy has increased recently worldwide, requiring new oilfield discoveries in order to supply this need. Following this demand increase, challenges grow in all areas of the petroleum industry especially those related drilling operations. Due to hard operational conditions found when drilling complex scenarios such as high pressure/high temperature zones, deep and ultradeep waters and other challenging ones, the use non-aqueous drilling fluids became a must. The reason for that is because this kind of drilling fluid is capable to tolerate these extreme drilling conditions found in those scenarios. However, it can experience changes in its properties as results of pressure and temperature variations, requiring special attention during some drilling operations, such as the well control. The well control is a critical issue since it involves safety, social, economic and environmental aspects. To support well control operations and preserve the well integrity, well control simulators are very useful to verify operational parameters and to assist drilling engineers in the decision making process during well control operations and kick situations. Well control simulators are also important computational tools for rig personnel training. This work presents well control research and development contributions, as well as the results of a computational well control simulator that applies the Driller’s Method and allows the understanding the thermodynamic behavior of synthetic drilling fluids, such as n-paraffin and ester base fluids. The simulator employed mathematical correlations for the drilling fluids PVT properties obtained from experimental data.The simulator results were compared to a test well data set, as well to published results from other kick simulators.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Aqueous and non-aqueous"

1

Karmakar, Anwesa. Modeling aqueous and non-aqueous electrolyte solutions from first principle approaches. Office of Scientific and Technical Information (OSTI), March 2019. http://dx.doi.org/10.2172/1501786.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Allen, Heather. Non-Equilibrium Nucleation of Rare Earth Metals at Aqueous Interfaces. Office of Scientific and Technical Information (OSTI), February 2024. http://dx.doi.org/10.2172/2290395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, K. H., C. Shan, and I. Javandel. Electrical resistivity for detecting subsurface non-aqueous phase liquids: A progress report. Office of Scientific and Technical Information (OSTI), June 1995. http://dx.doi.org/10.2172/90685.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gary A. Pope, Daene C. McKinney, Akhil Datta Gupta, Richard E. Jackson, and Minquan Jin. In-Situ Characterization of Dense Non-Aqueous Phase Liquids Using Partitioning Tracers. Office of Scientific and Technical Information (OSTI), March 2000. http://dx.doi.org/10.2172/793613.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cureton, LaShonda T., George Fountzoulas, and John J. La Scala. Molecular Weight Measurement of Biobased Furan Polyamides via Non-Aqueous Potentiometric Titration. Fort Belvoir, VA: Defense Technical Information Center, June 2013. http://dx.doi.org/10.21236/ada586113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Andrade, Gabriel A., Terry Chu, Shikha Sharma, Brian Lindley Scott, John Cameron Gordon, Nathan C. Smythe, and Benjamin L. Davis. Transition Metal Based Redox Carriers for use in Non-aqueous Redox Flow Batteries. Office of Scientific and Technical Information (OSTI), April 2019. http://dx.doi.org/10.2172/1511187.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Alan M. Shipley. Non-invasive Technology to Study Local Passivity Breakdown of Metal Alloys in Aqueous Media. Office of Scientific and Technical Information (OSTI), March 2005. http://dx.doi.org/10.2172/837571.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Taylor-Pashow, Kathryn M. L., and Daniel H. Jones. Non-Aqueous Titration Method for Determining Suppressor Concentration in the MCU Next Generation Solvent (NGS). Office of Scientific and Technical Information (OSTI), October 2017. http://dx.doi.org/10.2172/1404909.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

L.A. Johnson, Jr. CROWTM PROCESS APPLICATION FOR SITES CONTAMINATED WITH LIGHT NON-AQUEOUS PHASE LIQUIDS AND CHLORINATED HYDROCARBONS. Office of Scientific and Technical Information (OSTI), June 2003. http://dx.doi.org/10.2172/821181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Payne, F. C. Hot air injection for removal of dense, non-aqueous-phase liquid contaminants from low-permeability soils. Office of Scientific and Technical Information (OSTI), August 1996. http://dx.doi.org/10.2172/447169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aqueous and non-aqueous' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography