Dissertations / Theses on the topic 'Antenna'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Antenna.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Phan, Hong Phuong. "Conception d'antennes 2D et 3D sur des matériaux flexibles." Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAT106/document.
Full textThe thesis was carried out within the ANR project « Stick’It » that aimed at developing new, low-cost and innovative technologies devoted to the design of 2D, 2,5D and 3D radiofrequency (RF) components including antennas printed on conformable materials. The targeted applications are primarily home-networking devices such as set-top boxes where their forms and dimensions are widely varied. Therefore, it is necessary to design antennas on flexible substrates.According to our needs for a substrate material that is flexible, low cost, with good RF properties, recycling ability, and especially ability to make 3D structures, after considering various dielectric materials for flexible electronics, paper substrate appeared to be the most suitable for our purpose.The work of this thesis conducted in three phases.In the first phase, it was the study of methods for characterization of materials to obtain their electromagnetic properties. After analysis, the method of perturbation using a cylindrical cavity was chosen for characterization of paper. The first results of this process were verified by realization and testing of simple antennas such as CPW-fed monopoles on paper and PET. Then, the measurement of E4D paper substrate was performed with 50 samples cut from various E4D paper sheets of three different thicknesses, 104 m, 210 m and 387 m. The results were analyzed statistically and gave r = 3.184, tan = 0.092.The dispersions of the results measured at 2.5 GHz are 0.25% for r and 0.26% for tan. These results were used for the next phase.In the second phase, different antennas were designed on 0.104-mm and 0.21-mm thick E4D paper including IFAs, SIW cavity-back antenna and microstrip-fed wideband monopole antennas. The prototypes were realized using screen printing technique and tested for matching property and radiation patterns.In the third phase the proposed antennas were studied in realistic package conditions, where a set-top box was made of ABS plastic with different dimensions. The first case was with two MIMO antennas orthogonally located in different ABS boxes with sufficient space, so that both of them can remain flat. The second case was a box with a restricted height, so that at least one of the antennas needs to be bent.Thus, a study of bending effect was carried out, first of all, with a simple straight dipole and a straight monopole on E4D paper, then with a wideband antenna proposed in the second phase. The study showed, that bending does not much affect the matching of the antenna over a wide frequency band. However, its radiation patterns rotate in the E-plane with a rotation angle depending on the bending location and bending angle.Then, the MIMO system of two antennas placed orthogonally in an ABS box with restricted height so that one antenna needed to be bent and another remained flat. In all cases of MIMO antenna system, we obtained good isolation (>20 dB) and Envelope Correlation Coefficient (ECC) less than 0.05
Sonkki, M. (Marko). "Wideband and multi-element antennas for mobile applications." Doctoral thesis, Oulun yliopisto, 2013. http://urn.fi/urn:isbn:9789526201085.
Full textTiivistelmä Väitöskirjassa esitetään uusia laajakaistaisia ja monielementtiantenneja matkaviestimiin. Väitöskirja koostuu neljästä pääalueesta: pintavirtojen muototeoria, laajakaistaiset antennit, monielementtiantennit sekä laajakaistaiset monielementtiantennit. Teoriaosassa säteilykenttiä on aluksi tutkittu pallon pinnalla sekä skalaaripotentiaaleina että pintavirtavektoreina, jonka jälkeen niitä on verrattu mobiilin laitteen maatason ominaispintavirtojen synnyttämiin säteilykenttiin. Teoriaosassa osoitetaan, että pallon pinnalla sekä tasomaisella suorakaiteen muotoisella pinnalla on mahdollista herättää samat säteilykentät. Myöhemmin väitöskirjassa esitettävien uudenlaisten antennirakenteiden ominaisuuksia verrataan teoriaosassa esitettyihin pintavirtoihin ja säteilykenttiin. Teoriaosuuden jälkeen osoitetaan miten säteilevä sähkömagneettinen kenttä saadaan herätettyä laajalla taajuusalueella. Tähän on otettu kaksi eri lähestymistapaa, joista ensimmäisessä esitellään ja tutkitaan kvasikomplementaarista antennirakennetta (QCA). Kvasikomplementaarisessa antennirakenteessa sisääntuloimpedanssin imaginaariosa kompensoidaan yhdistämällä sähköinen johde ja magneettinen rako samaan antenniin. Samanaikaisesti perusmuoto herätetään laajalla taajuusalueella, jolla varmistetaan antennin hyvät säteilyominaisuudet koko toimintataajuusalueella. Toisessa lähestymistavassa käytetään kahta symmetrisesti asetettua antennielementtiä, joita syötetään symmetrisesti samalla amplitudilla ja vaiheella. Kun sähkömagneettinen kenttä herätetään symmetrisesti, korkeamman kertaluvun muotojen herättäminen voidaan välttää laajalla taajuusalueella. Symmetrisesti syötetyillä antennirakenteilla saavutettu -6 dB suhteellinen impedanssikaistanleveys on 37.5–80 %. Useita syöttöelementtejä käytettäessä voidaan mobiilin laitteen maatasossa herättää yhdellä pistetaajuudella monta toisistaan riippumatonta säteilykenttää. Koska herätetyt kentät ovat toisistaan riippumattomia, on niiden välinen korrelaatio myös pieni. Kyseisellä rakenteella on mahdollista toteuttaa säteilykuviodiversiteetti erittäin pienessä tilassa, kuten matkapuhelimessa. Toisaalta, kun yhdistetään kaksi QCA-elementtiä yhdeksi monielementtiratkaisuksi, voidaan toteuttaa laajakaistainen diversiteettiantenni, jonka suhteellinen -6 dB impedanssikaistanleveys on 87.5 %. Vastaavasti kahdella laajakaistaisella QCA-elementillä toteutetulla MIMO-ratkaisulla päästään 95 % suhteelliseen -6 dB impedanssikaistanleveyteen. Molemmilla ratkaisuilla on erittäin hyvät säteilyominaisuudet sekä alhainen korrelaatio ja pieni keskinäiskytkentä antennielementtien välillä. Suunniteltaessa toimivaa laajakaistaista antennirakennetta, on tärkeää ottaa huomioon antennisyötön impedanssisovitus, jotta antennin suorituskyky ei heikkenisi. Lisäksi balansoidussa rakenteissa tulee olla laajakaistainen baluni, jolla vältetään säteilykuvion vääristyminen. Väitöskirjan syöttöratkaisuissa on käytetty kaupallisia sähkömagneettisia simulaattoreita, joilla antennirakenne voidaan mallintaa kolmiulotteisesti, ja joilla laajakaistainen syöttö saadaan optimoitua haluttuun antenniin. Suurin osa esitellyistä antennirakenteista on simulointien lisäksi myös mitattu, jolloin niiden toimivuus käytännössä pystytään todentamaan rakentamalla prototyyppiantenni. Yleisesti väitöskirjassa esitellään tasomaisia antenniratkaisuja johtavassa maatasossa, joissa säteilevät pintavirrat herätetään mahdollisimman laajalla taajuusalueella. Ideana on löytää laajakaistaisia antenni- ja syöttörakenteita, joilla saadaan herätettyä perusmuoto tai jokin muu haluttu muoto. Ajatuksena on välttää korkeamman kertaluvun muotojen herättäminen, jotka voivat pilata antennin suorituskyvyn. Väitöskirjassa osoitetaan myös, että pienikokoisella antennilla on mahdollista herättää korkeamman kertaluvun muotoja pistetaajuudella käyttämällä useita heräte-elementtejä
Lai, Hau Wah. "Wideband meandering probe-fed patch antenna /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b19887383a.pdf.
Full text"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 144-153).
Scattone, Francesco. "Phased array antenna with significant reduction of active controls." Thesis, Rennes 1, 2015. http://www.theses.fr/2015REN1S168/document.
Full textThe objective of this thesis is to exploit the leaky-wave phenomena to enhance the performance of classical aperture antennas for space applications. Here, we consider planar configurations where the leaky modes are excited between a ground plane and a partially reflective superstrate. Arrangements of small apertures opening on the ground plane are used to feed the antennas under study. The superstrate-like leaky-wave structures are developed in array or phased array configurations, considered of interest in terms of flexibility of the system for next generation satellite links. In order to efficiently study planar leaky-wave arrays, we have developed an analysis tool based on a Green's function spectral approach. The developed tool allows to precisely analyze the proposed structure by taking into account the impact of the mutual coupling among the elements on the radiation performance of the whole antenna. In addition, it can handle extremely large structures in terms of wavelengths with a small computational effort with respect to commercial tools. In particular, the gain enhancement of leaky-based structures can pave the way to the reduction of the number of elements of the associated phased arrays. In a leaky-wave configuration each element of the array will radiate with a larger equivalent aperture allowing a larger spacing among elements without affecting the final gain of the whole structure. This aspect is particularly important in the case of phased arrays, where phase shifters and control cells are, typically, the most expensive components of the system. As extensively explained in the manuscript, antennas for user segment might find the highest benefit by using leaky-wave solutions. Besides the gain enhancement, the leaky-wave technology can be effectively exploited to conveniently shape the radiation pattern by properly engineering the design parameters of the antenna. This capability can be used in phased arrays to generate a convenient element pattern to minimize the scan losses and filter the grating lobes appearing in the visible space when dealing with periodicities larger than a wavelength. Therefore, a synthesis procedure for thinned leaky-wave arrays is presented in the manuscript. Also, a novel array configuration, the irregular superstrate array, is presented. The irregular superstrate allows the reduction of the side lobes of the antenna below -20 dB in the considered 2.5 % band, using a uniform excitation. This last configuration clearly shows that the shaping capability of leaky-wave antennas is the most appealing feature to be used in phased array solutions
Bui, Do Hanh Ngan. "Antennes souples imprimables pour la récupération de champs électromagnétiques ambiants." Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAT062/document.
Full textInternet-of-Things means a growing development of interconnected objects that are likely to change many services within the industry as well as for the individual. Several barriers, including the energy autonomy of objects or production processes that are economically acceptable and respectful of the planet, hamper current developments. In this context, energy recovery is a widespread theme using a wide range of sources (mechanical, thermal, electromagnetic, etc.). This thesis is oriented towards the recovery of ambient electromagnetic energy. The second characteristic point of this thesis is to focus on flexible and, if possible, recyclable substrates. The challenge is to recover energy from an extremely low ambient electromagnetic field: this concerns the antenna, which must also meet a requirement for flexibility for its future integration with a flexible and deformable object, and the electronics of energy processing.The work of this thesis conducted in three phases.In the first phase, it was the study of the antenna structures compatible with frequency and power received with the energy harvesting application and a physical realization on flexible base (paper, textile, etc.). This phase allowed presenting the different approaches to combining the RF sources.In the second phase, the study on the role of rectifying circuit in the system of recovering wireless energy was presented. Methods for extracting parameters were discussed by separating each element and its roles. Numerous measurements have been conducted to compare different models of the diode, taking into account also the actual impact of the manufacturing process and the measurement process.A third phase allows the optimization of the antenna and electronic assembly (rectenna) for various scenarios and the monitoring of variability to keep the losses of the system at minima. The production of relevant demonstrators, test and characterization were presented
Ouedraogo, Samir. "Antenne Multifonction pour Radar et Communication." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLC010/document.
Full textIn order to respond to the increasingly demand of new services, the objects we use on a daily basis (such as mobile phones, cars, airplanes etc.), tend to integrate more and more radio systems while the space available is limited. These radio systems require the use of many antennas that must meet multiple requirements such as compactness, isolation, costs, etc. A smart-phone, for example, contains several antennas for global navigation satellite system (GNSS), WiFi, TV, FM radio, Bluetooth, near-field communications (NFC) and the number is expected to increase as new systems are added. Another example is in airborne platforms where multiple functions such as communication, navigation, radar, electronic warfare are used. This leads to the need of reducing the number of associated antennas by regrouping several radio functions into a single antenna. However, combining the functionality of several antennas into one shared radiating element while maintaining the functionality of the various radio systems presents a great challenge. During its Ph.D, J. Euzière demonstrated the possibility to combine a radar function and a secondary function from a 16-monopole array originally dedicated to radar operation by using Time Modulated Array (TMA) technique. By this way, the two functions were operating at the same frequency and the system was powered by a single source.The main objective of this thesis is to propose a more compact antenna (a single antenna) dedicated to radar and communication operations instead of using antenna array as J. Euzière did it. The idea is to start from an existing antenna solution and make the necessary modifications to add a second function without adding additional surface and complexity. As we are interested in radar applications, we will choose a directive antenna: a horn antenna. The goal is then to study the possibility to modify the radiation pattern of the horn antenna through controllable elements (slots) and to transmit a direct modulated signal at the antenna level for the communication function. Furthermore, polarization diversity is an attractive way to increase the isolation between two applications. Thus, this aspect will be taken into account in the design of the antenna solution
Jusoh, Tajudin Mohd Taufik. "Study and design of reconfigurable antennas using plasma medium." Phd thesis, Université Rennes 1, 2014. http://tel.archives-ouvertes.fr/tel-01060295.
Full textHildebrand, Louis Trichardt. "The analysis of microstrip wire-grid antenna arrays." Pretoria : [s.n.], 2010. http://upetd.up.ac.za/thesis/available/etd-01272010-130234/.
Full textBenomar, Ahmed. "Etude des Antennes à Résonateurs Diélectriques. : Application aux Réseaux de Télécommunications." Thesis, Limoges, 2015. http://www.theses.fr/2015LIMO0025/document.
Full textA fast technological development in the telecommunications domain, as mobile telephony, wireless networks, TV over Satellite, Radar Applications (civil or military)…etc, is observed. This considerable growth has led to enormous needs and caused a major technological evolution in antennas. These have to face different needs such as gain improvement, bandwidth enlargement, and different existing problems, such as cost and overcrowding…etc. Though, our goal is to design antenna topologies that are simple, having Low overcrowding and relatively with high gain operating in multiband and/or ultra large. To achieve this we headed to Dielectric Resonator Antennas (DRA) in UHF and SHF bands. Recently they have been the subject of several studies and have gained great interest from both academic and industrial sectors. Due to their diverse and simple geometries, they can be fed with different usual techniques. Furthermore, they can be smaller than patch antennas. The first part of this work has focused on the study of cylindrical DRAs, and then a validation of the simulating tool has been done after comparison with measurement results. For a multi-standard utilization, enlargement antennas’ operating bands, to have bi-band behaviour, get a modification of the resonant frequency and also a reduction of the overcrowding, the second part is dedicated to the study of new resonator topologies based on a vertical and radial stack of two cylinders, and then a multilayer and ring topologies. The obtained results found their applications in GSM900-DCS1800-UMTS-WiFi…
Nair, Sidharth. "A Multiple Antenna Global Positioning System Configuration for Enhanced Performance." Ohio University / OhioLINK, 2004. http://www.ohiolink.edu/etd/view.cgi?ohiou1090937438.
Full textAqbi, Sadiq. "Improving the Performance of Dual Linear Polarization Antennas with Metamaterial Structures." Doctoral thesis, Universitätsbibliothek Chemnitz, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-233539.
Full textIn der folgenden Dissertation wird der Einsatz von zweifach linear polarisierten Antennen zur idealen Ausführung von verschiedenen Anwendungen, einschließlich von polarimetrischen Synthetic Aperture Radar (SAR), kabellose und satellitengestützte Kommunikation, diskutiert. Die Ziele dieser Arbeit werden dargestellt durch die Gestaltung von zweifach linear polarisierten Antennen mit gering Kreuz-Polarisationsmustern und die starke Isolation zwischen den Ports durch die einzigartigen Eigenschaften der Strukturen des elektromagnetischen Metamaterials (electromagnetic metamaterial; MTM). Einige dieser Eigenschaften treten als negative Permittivität, negative Permeabilität, negativer Brechungsindex und als antiparallel Richtungen (Gegenvektor) der Phasen-und Gruppengeschwindigkeit auf. Somit wird die Antennengestaltung auf zwei Frequenzen übertragen, 5,5GHz und 10 GHz, und die Ausführung der zweifach linearen Polarisation wird durch die elektromagnetischen Eigenschaften des MTM illustriert. Weil die Kreuzpolarisationsmuster und starke gegenseitige Koppelung zwischen zwei Input-Ports bei einer zweifach linear polarisierten Antenne große Schwierigkeiten bereiten, werden diese im Großteil der Fachliteratur als Schwerpunkte gesetzt, was zu einer Milderung der Nachteile führte, jedoch dafür die Komplexität der Antennenstruktur zunahm. Die Vielfalt an MTM ist ein bedeutender Teil im Bereich der Antennenforschung einschließlich der Größenverkleinerung, der Verbesserung der Richtcharakteristik und der Strahlensteuerung. Für diesen Zweck werden in dieser Dissertation verschiedenste MTM Strukturen ausgewählt um weitere Verbesserungen der Antennenstruktur zu ermöglichen und gleichzeitig die Einfachheit der Struktur zu bewahren, was mit konventionellen Gestaltungsmethoden nur schwer zu erreichen ist
Li, Pei. "Novel wideband dual-frequency L-probe fed patch antenna and array /." access abstract and table of contents access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b21471447a.pdf.
Full text"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy" Includes bibliographical references (leaves 179-189)
Hwang, Seung-Hyeon. "Adaptive antenna techniques for smart antennas and radar systems." Related electronic resource: Current Research at SU : database of SU dissertations, recent titles available full text, 2005. http://wwwlib.umi.com/cr/syr/main.
Full textKim, Yongjin. "Development of automobile antenna design and optimization for FM/GPS/SDARS applications." Connect to this title online, 2003. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1054307551.
Full textTitle from first page of PDF file. Document formatted into pages; contains xvii, 158 p.; also includes graphics Includes bibliographical references (p. 154-158). Available online via OhioLINK's ETD Center
Chiu, Chi Yuk. "Impedance bandwidth broadening techniques for small patch antennas /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b19887796a.pdf.
Full text"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy" Includes bibliographical references (leaves 152-162)
Toh, B. Y. "Heterodyne self-steering array characterization for mobile communications." Thesis, Queen's University Belfast, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390865.
Full textShahpari, Morteza. "Fundamental Limitations of Small Antennas." Thesis, Griffith University, 2015. http://hdl.handle.net/10072/365747.
Full textThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
Griffith School of Engineering
Science, Environment, Engineering and Technology
Full Text
Krieger, James David. "Single-Antenna Method for Antenna Calibration." The Ohio State University, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=osu1392798546.
Full textGorla, Hemachandra Reddy reddy. "MINIATUIRIZED ULTRA-WIDEBAND ANTENNAS FOR WIRELESS COMMUNICATIONS." OpenSIUC, 2021. https://opensiuc.lib.siu.edu/dissertations/1905.
Full textDorsey, William Mark. "Low Profile, Printed Circuit, Dual-Band, Dual-Polarized Antenna Elements and Arrays." Diss., Virginia Tech, 2009. http://hdl.handle.net/10919/26683.
Full textPh. D.
Cosker, Mathieu. "Conception d'antennes à base de métal liquide pour applications multiples." Thesis, Université Côte d'Azur (ComUE), 2017. http://www.theses.fr/2017AZUR4145/document.
Full textToday, electronic is an integral part of our lives. Indeed, more and more objects integrate electronics to connect each other, this is the Internet of Things (IoT). All of these wireless devices need one or more antennas. Furthermore, It’s useful to develop new materials to realize new antennas that fit with new constraints: smaller and flexible objects, more and more sensors and less and less consuming.In this context, we have focused this research on antenna structures based on metals which are liquid at room temperature to realize conformable antennas of complex shapes combining 3D printing, reconfigurable antennas and radiant structures with the ability to sensor. In this manuscript, antenna prototypes with these characteristics have been simulated, realized and measured
Lardies, Joseph. "Etude d'antennes acoustiques a directivite constante sur une large bande." Toulouse 3, 1987. http://www.theses.fr/1987TOU30214.
Full textVarum, Tiago Miguel Valente. "Nonuniform 2D microstrip antenna arrays for wireless applications." Doctoral thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/17373.
Full textWireless communications have undergone over the last decades a tremendous progress as a consequence of the exponential growth in demand for mobile devices, and nowadays are more and more involved in people's lives. This presence is re ected through the use of a large number of applications of which they become increasingly dependent on. The antenna, in its most di erent forms, are crucial elements in the establishment this type of communication. Each application involves a number of speci c characteristics, whereby, the improvement of wireless communications is related to the appropriateness of the used antenna. Many applications require antennas with radiation pattern with its particular shapes (in terms of beamwidth, side lobes levels, direction, etc ..), static or dynamic (adaptive antennas), involving in most cases the use antenna arrays to meet to such constraints. In this thesis, a number of techniques to synthesize antennas consisting of planar arrays with nonuniform excitation of their elements, are addressed. A group of the direction of arrival and beamforming estimation algorithms are also presented and analyzed, in order to enable their application in adaptive antenna array with dynamic beamforming. A vast and diversi ed set of arrays with di erent radiation requirements, and for di erent applications were developed. These arrays have great applicability in current research topics in antennas, such as vehicle communications, Wi-Fi in sports venues and smart antennas.
As comunicações sem os têm sofrido, ao longo das ultimas décadas, um enorme progresso em consequência do aumento exponencial da procura de dispositivos móveis, estando hoje em dia cada vez mais presentes na vida das pessoas. Esta presença re ete-se através do uso de um elevado número de aplicações das quais se tornam cada vez mais dependentes. As antenas, nas suas mais diversi cadas formas, são elementos cruciais no estabelecimento deste tipo de comunicações. Cada aplicação envolve um conjunto de características especí cas, pelo que a melhoria das comunica ções sem os está relacionada com a adequação da antena usada. Muitas aplicações necessitam de antenas com diagramas de radiação com formatos próprios (em termos de larguras de feixe, níveis de lobos secund ários, direção, etc..), sejam eles estáticos ou dinâmicos (antenas adaptativas), implicando na maioria dos casos o uso de agregados de antenas para fazer face a tais condições. Nesta tese são abordadas várias técnicas de desenho de antenas constituídas por agregados planares, com alimentação não uniforme dos seus elementos. Um conjunto de algoritmos de estimação dos ângulos de chegada e de formação de feixe são também apresentados e analisados com vista à sua aplicação em agregados de antenas adaptativas, com formação de feixe dinâmico. Um vasto e diversi cado conjunto de agregados com diferentes requisitos de radiação, destinados a diferentes aplicações foram desenvolvidos. Estes agregados têm grande aplicabilidade nos atuais tópicos de investiga ção em antenas, tais como as comunicações veiculares, Wi-Fi em espaços desportivos e smart antenas.
Sundaram, Ananth Ramadoss Ramesh. "Electronically Steerable Antenna Array using PCB-based MEMS Phase Shifters." Auburn, Ala., 2006. http://repo.lib.auburn.edu/2006%20Summer/Theses/SUNDARAM_ANANTH_51.pdf.
Full textVines, Roger. "MISSILE ANTENNA PATTERNS FOR WIDELY-SPACED MULTI-ELEMENT ARRAYS." International Foundation for Telemetering, 2005. http://hdl.handle.net/10150/605040.
Full textMultiple discrete antennas distributed around the circumference of a large missile and driven by one transmitter are sometimes used to radiate telemetry omnidirectionally. But driving discrete antennas separated by several wavelengths around the missile body with a single transmitter can result in an antenna pattern with deep nulls in the roll plane. Varying the relative signal phase or amplitude among the signals driving the antennas as well as the polarization of the antennas can be used to change the nulls in an attempt to decrease the null depth. In this paper the effects of phase, amplitude, and polarization on the roll-plane pattern are examined and measurement data presented.
Eng, Cher Shin. "Digital antenna architectures using commercial off-the-shelf hardware." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Dec%5FEng.pdf.
Full textThesis advisor(s): David C. Jenn, Roberto Cristi. Includes bibliographical references (p. 75-76). Also available online.
Petrus, Paul. "Blind adaptive antenna arrays for mobile communications." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-07112009-040414/.
Full textJaeck, Vincent. "Développement d’antennes de communication reconfigurables en bande C pour munitions intelligentes." Thesis, Rennes 1, 2016. http://www.theses.fr/2016REN1S104/document.
Full textNowadays wireless communications have become a useful and universal mean to exchange a wide range of information between different systems, some of them being moving, as UAVs among others. In this context we consider here the link between a projectile and a base station. The shape of the structure and the aerodynamic constraints involve the use of patch antennas in the conical front part. This class of antenna is easy to be integrated into the platform as a conformal array, while respecting space constraint. Communications have to be reliable and discrete in disturbed or hostile environment. Antennas array radiation patterns must have some specific characteristics, in particular in the case of flying objects with spin which involves the use of a switched phased array considering its roll position. A fixed-radiation pattern antenna may presents a relevant level or gain toward the interlocutor, but also toward sensitive directions, in which may be located others systems, interfering with the current communication. The solution to switch on and off vertical sub-arrays to steer the beam in the azimuthal plane seem convenient ant fitting the requirements of rotating platform. A conical phased array was studied and two prototypes were manufactured, one at ISL. Sub-arrays are distributed around the conical shape in order to be able to radiate in each direction. Moreover, each sub-array are composed of three radiating elements allowing to steer the main antenna beam in many direction (along the projectile fuze axes). A beam forming network was developed to control the 12 radiating elements conical array. The antenna array and the feeding network were characterized independently in order to optimized the phase of each radiating element. Finally, measurements were done on the whole system in the DGA-MI and ISL anechoic chambers and are in good agreement with simulation results
Lundholm, Steven E. "Predicting antenna parameters from antenna physical dimensions." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1993. http://handle.dtic.mil/100.2/ADA276442.
Full textThesis advisor(s): Robertson, R. Clark. "December 1993." Includes bibliographical references. Also available online.
Kara, Mehmet. "Microstrip antennae with various substrate thickness /." Title page, contents and abstract only, 1996. http://web4.library.adelaide.edu.au/theses/09PH/09phk1778.pdf.
Full textPerotoni, Marcelo Bender. "Projeto e desenvolvimento de lentes discretas." Universidade de São Paulo, 2005. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-25072005-081712/.
Full textThe object of this work is the study, design, development, fabrication and measurement of discrete lens arrays (DLAs). These devices act as radiant systems, especially with multi-beam characteristics. Their construction follows the same procedures and techniques normally found in printed circuit fabrication, with some further details that are pertinent to the antenna and planar circuit field. This study contains the design equations and general remarks as to fulfill preliminary technical specifications. Two real designs were developed, one in the X-band (8GHz) and another in the millimeter range, Ka band (40GHz). Their respective measurement results are presented, which proved their possible application in multi-beam systems, as well as their focusing effect, which is analogous to that observed in common optical lenses.
Debard, Alexandre. "Analyse et optimisation d'antennes réseaux compactes superdirectives." Thesis, Université Grenoble Alpes, 2020. http://www.theses.fr/2020GRALT058.
Full textThe purpose of this thesis is to study and seek improvement of the superdirective antenna array technology. This technology has been recently re-examined in the literature since it can bring some interesting functionalities in the future telecommunication applications. The examination of this type of antenna is thus conducted through the use of Spherical Wave Expansion which allows for the general study of directivity limits as well as gain limits, considering lossy antennas. The classical theory of end-fire array antennas is also reviewed, in the case of uniformly spaced tapered arrays, providing theoretical evaluation of efficiency and sensitivity to source feeding precision.Infinitesimal dipoles and Huygens sources are considered in a proposed development that links array theory and Spherical Wave Expansion. This contribution provides a formal proof for the directivity limit of Huygens-source-based end-fire arrays as well as an upper bound for the directivity of dipole-based arrays, when the inter-element spacing tends to zero. Moreover, it is shown how classical array theory can also be used to derive excitation coefficients that maximize gain rather than directivity, when loss resistances are considered. An examination over antenna size is also made to demonstrate which conditions are most favorable for the use of such supergain or superdirective end-fire array optimization.In a second part, practical implementations of superdirective antennas are surveyed, focusing on Huygens sources and compact end-fire array designs. The chosen implementation architecture of parasitic element arrays is then detailed and studied, in order to minimize the requirement for negative or positive resistive loads. This lead to the design and measurement of five prototypes that aim at achieving the maximum possible gain or directivity for a limited radiator size, with two-, three- and four-dipole end-fire arrays
Schlub, Robert Walter, and n/a. "Practical Realization of Switched and Adaptive Parasitic Monopole Radiating Structures." Griffith University. School of Microelectronic Engineering, 2004. http://www4.gu.edu.au:8080/adt-root/public/adt-QGU20040610.112148.
Full textSchlub, Robert Walter. "Practical Realization of Switched and Adaptive Parasitic Monopole Radiating Structures." Thesis, Griffith University, 2004. http://hdl.handle.net/10072/366803.
Full textThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Microelectronic Engineering
Full Text
McFadden, Michael. "Analysis of the equiangular spiral antenna." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31726.
Full textCommittee Chair: Scott, Waymond; Committee Member: Eslinger, Owen; Committee Member: Ingram, Mary; Committee Member: Peterson, Andrew; Committee Member: Smith, Glenn. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Ong, Chin Siang. "Digital phased array architectures for radar and communications based on off-the-shelf wireless technologies." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Dec%5FOng.pdf.
Full textThesis advisor(s): David C. Jenn, Siew Yam Yeo. Includes bibliographical references (p. 63-64). Also available online.
Gokalp, Nihan. "Beam Steerable Meanderline Antenna Using Varactor Diodes And Reconfigurable Antenna Designs By Mems Switches." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609982/index.pdf.
Full textbeam-steerable meanderline antenna, dual circularly polarized meanderline antenna and dual-frequency slot-dipole array. Traveling wave meanderline antenna arrays are investigated in detail and a beam-steerable traveling wave meanderline antenna array has been introduced for X-band applications. Beam-steering capability of the antenna array has been achieved by loading the antenna elements with varactor diodes. Theoretical analysis and computer simulations of the proposed antenna have been verified with experimental results. Radiation direction of the 8-element meanderline array can be rotated 10°
by changing the varactor diode&rsquo
s bias voltage from 0V up to 20V. Also, a polarization-agile meanderline antenna array has been designed and simulated. Polarization of the circularly polarized meanderline array can be altered between right hand circularly polarized and left hand circularly polarized by using RF MEMS switches. The third type of reconfigurable antenna investigated in this thesis is a dual frequency slot-dipole array operating at X- and Ka-band. Electrical length of the slot dipoles has been tuned by using RF MEMS switches. Antenna prototypes have been manufactured for &lsquo
on&rsquo
and &lsquo
off&rsquo
states of RF MEMS switches and it has been shown that the operating frequency can be changed between 10 GHz and 15.4 GHz.
RAZZAQ, ABDUL. "Miniaturized antenna design & Radiation pattern corrections in Fresnel region." Doctoral thesis, Politecnico di Torino, 2015. http://hdl.handle.net/11583/2587158.
Full textBezerra, Josà Wagner de Oliveira. "Estudo numÃrico/experimental de antena ressoadora dielÃtrica circularmente polarizada com alimentaÃÃo por sonda Ãnica." Universidade Federal do CearÃ, 2012. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=8101.
Full textA expansÃo das redes de telecomunicaÃÃes sem fio e o fenÃmeno da convergÃncia digital trazem a inerente necessidade da pesquisa de novos componentes que assegurem a sustentabilidade e a evoluÃÃo dos sistemas. Novos tipos de antenas, menores e mais eficientes, sÃo exigidas à medida que novos dispositivos vÃo surgindo. Neste contexto, as antenas ressoadoras dielÃtricas, construÃdas com novos materiais, aparecem como excelente opÃÃo para substituir as antenas metÃlicas tradicionais. Este trabalho apresenta uma proposta de antena ressoadora dielÃtrica circularmente polarizada, operando na frequÃncia central de 2,25 GHz, na qual um esquema de alimentaÃÃo por sonda Ãnica à empregado para excitar dois modos ressonantes em um dielÃtrico em forma de quarto de cilindro. Este leiaute permite a ativaÃÃo de modos de baixa ordem, com distribuiÃÃo ortogonal dos campos eletromagnÃticos, ressoando em frequÃncias prÃximas com uma diferenÃa de fase de 90Â. SÃo introduzidos conceitos da teoria eletromagnÃtica envolvendo cavidades ressonantes e caracterÃsticas dos materiais cerÃmicos que compÃem o dielÃtrico. AlÃm disso, os processos de modelagem por computador e de construÃÃo de um protÃtipo sÃo explicados. Os resultados sÃo discutidos comparativamente entre o modelo computacional e as medidas experimentais executadas em laboratÃrio. O estudo demonstra uma boa concordÃncia entre os resultados simulados e os experimentais e evidencia a viabilidade da antena para aplicaÃÃes que necessitem de polarizaÃÃo circular na regiÃo do espectro de frequÃncias prÃximas a 2,25 GHz.
The expansion of wireless telecommunications networks and the phenomenon of digital convergence bring the inherent need for research of new components to ensure the sustainability and evolution of the systems. New types of antenna, smaller and more efficient, are required as new devices emerge. In this context, the dielectric resonator antennas, built with new materials, appear as an excellent option to replace the conventional metallic antennas. This work presents a proposal for a circularly polarized dielectric resonator antenna to operate at the center frequency of 2.25 GHz in which a single probe feeding scheme is used to excite two resonant modes in a quarter-cylinder-shaped dielectric. This layout allows the activation of low-order modes with orthogonal distribution of electromagnetic fields, resonating at near frequencies with a 90Â phase difference. The concepts of electromagnetic theory related to resonant cavities and the characteristics of dielectric ceramic materials are introduced. Furthermore, the processes of computer modeling and constructing of a prototype are explained. The results are discussed by comparison between the computational model and experimental measurements performed in the laboratory. The study shows a good agreement between the simulated and experimental results and demonstrates the feasibility of the antenna for applications requiring circular polarization for operating at the region of the frequency spectrum close to 2.25 GHz.
Zarei, Hossein. "RF variable phase shifters for multiple smart antenna transceivers /." Thesis, Connect to this title online; UW restricted, 2004. http://hdl.handle.net/1773/5964.
Full textPotelon, Thomas. "Étude et conception d'antennes multifaisceaux en bandes V et E pour les futurs réseaux cellulaires hétérogènes 5G." Thesis, Rennes 1, 2017. http://www.theses.fr/2017REN1S164.
Full textThe evolution of numerical technologies allowed the daily use of connected object for a large part of the world’s population. To fulfill the ever-growing demand for wireless communication, new technologies have to be developed in order to obtain higher data-rate with smaller and cheaper devices. The antenna plays a major role in communication systems and their performances are to be improved to obtain more efficient telecommunications. Indeed the rise of data-rate involves an improvement of the antenna gain and bandwidth, but the integration of directive antennas is always challenging. The actual trend is the shift to higher frequency bands, in the millimeter-wave range, this allows a size reduction together with the use of broader bandwidth; however the fabrication becomes a real challenge. The research work realized in this thesis concern the design, fabrication and experimental characterization of antennas for backhaul links: the E-band (71-86GHz) communication between two fixed antennas used in cellular network; nonetheless the solutions developed can easily be applied to other applications such as radar or satellite communications.The studied systems combine a one-dimensional array of long radiating slots (CTS) fed in parallel with a quasi-optical beam forming network (pillbox system). The radiating slots are made of truncated parallel plate waveguides (PPW) and are fed in parallel by a power-divider network realized in PPW technology. The pillbox system consists of two stacked PPWs connected by a multi-slot coupler and an integrated parabolic reflector, the latter converts the cylindrical wave emitted by a focal feed into a planar wave. The omnipresence of PPWs throughout the antenna system insures a broad band of operation, and the architecture shows a lower profile than quasi-optical antennas. This antenna presents an unequaled tradeoff between a high gain, a wide bandwidth and a low-profile. Unfortunately they also have drawbacks. From a technological point of view, their fabrication is complicated and expensive. This is why in this thesis a particular attention is given to the use of new techniques allowing the fabrication of prototypes leading to experimental validation of the results. From the radiation performance point of view, CTS/pillbox antennas do not show any reconfigurability solution in the E-plane and the overlap level obtained in H-plane with already existing antennas is too low to be usable. In this thesis, innovative solutions are investigated to find solution to this lake of versatility. Finally the sidelobe level (SLL) in E-plane of the totality of parallel-fed CTS antennas described in the open-literature is about -13.5dB. A new architecture introduced in this thesis allows a reduction of this SLL down to a negligible level
Barro, Oumar Alassane. "Design and manufacturing reconfigurable antennas using plasma." Thesis, Rennes 1, 2016. http://www.theses.fr/2016REN1S068/document.
Full textPlasma is the 4th state of matter with complex permittivity that can be exploited to give advantages in communication systems. Its negative permittivity allows to have similar characteristics as metal material in terms of electrical conductivity. Since many years, plasma antennas have been studied due to their ability to be conductor or transparent for electromagnetic waves. The main advantage of using plasma antennas instead of metallic ones is that they allow electrical control rather than mechanical one. Therefore, this thesis aimed to use plasma as an alternative to metal in the design of reconfigurable antennas. The first part of this thesis is dedicated to the state of the art on plasma in communication systems in order to protect antennas. The second part presents the use of plasma spiral lamp as Faraday Shield effect. Two types of antennas (patch and monopole) operating at 2.45 GHz are placed inside this plasma spiral lamp. The third part discusses about reconfigurable antennas using plasma tubes and in order to reconfigure the half-power-beam-width of the radiation pattern in H plane. Two types of antenna array have been studied: The first one is a printed patches antenna array and the second one is a slotted antenna array allowing high power utilization. The fourth part deals with plasma as radiating element. Two plasma antennas using commercially available fluorescent lamp have been studied. All the antenna systems presented in this thesis have been simulated, manufactured and measured
Byrne, Benedikt. "Etude et conception de guides d'onde et d'antennes cornets à métamatériaux." Phd thesis, Toulouse, INPT, 2016. http://oatao.univ-toulouse.fr/17299/7/byrne.pdf.
Full textKaiser, Julius A., and Fredrick W. Herold. "ANTENNA CONTROL FOR TT&C ANTENNA SYSTEMS." International Foundation for Telemetering, 2000. http://hdl.handle.net/10150/608253.
Full textA thinned array sensor system develops error voltages for steering dish antennas from signals arriving over a broad range of angles, thereby eliminating need for a priori knowledge of signal location.
Cummings, Nathan Patrick. "Active Antenna Bandwidth Control Using Reconfigurable Antenna Elements." Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/29990.
Full textPh. D.
Evans, Daniel N. "Near-Optimal Antenna Design for Multiple Antenna Systems." Diss., CLICK HERE for online access, 2009. http://contentdm.lib.byu.edu/ETD/image/etd2796.pdf.
Full textMorsy, Mohamed Mostafa. "DESIGN AND IMPLEMENTATION OF MICROSTRIP MONOPOLE AND DIELECTRIC RESONATOR ANTENNAS FOR ULTRA WIDEBAND APPLICATIONS." OpenSIUC, 2010. https://opensiuc.lib.siu.edu/dissertations/169.
Full textDavids, Vernon Pete. "Implementation of a wideband microstrip phased array antenna for X-band radar applications." Thesis, Cape Peninsula University of Technology, 2009. http://hdl.handle.net/20.500.11838/1100.
Full textThis thesis presents the design, analysis and implementation of an eight-element phased array antenna for wideband X-band applications. The microstrip phased array antenna is designed using eight quasi-Yagi antennas in a linear configuration and is printed on RT/Duroid 6010LM substrate made by Rogers Corporation. The feeding network entails a uniform beamforming network as well as a non-uniform -25 dB Dolph-Tschebyscheff beamforming network, each with and without 45° delay lines, generating a squinted beam 14° from boresight. Antenna parameters such as gain, radiation patterns and impedance bandwidth (BW) are investigated in the single element as well as the array environment. Mutual coupling between the elements in the array is also predicted. The quasi-Yagi radiator employed as radiating element in the array measured an exceptional impedance bandwidth (BW) of 50% for a S11 < -10 dB from 6 GHz to 14 GHz, with 3 dB to 5 dB of absolute gain in the frequency range from 8 GHz to 11.5 GHz. The uniform broadside array measured an impedance BW of 20% over the frequency band and a gain between 9 dB to 11 dB, whereas the non-uniform broadside array measured a gain of 9 dB to 11 dB and an impedance BW of 14.5%. Radiation patterns are stable across the X-band. Beam scanning is illustrated in the E-plane for the uniform array as well as for the non-uniform array.
Duplouy, Johan. "Wideband Reconfigurable Vector Antenna for 3-D Direction Finding Application." Thesis, Toulouse, INPT, 2019. http://oatao.univ-toulouse.fr/24404/1/Duplouy_Johan.pdf.
Full textKabalan, Aladdin. "Miniaturisation et modélisation d’antennes monopoles larges bandes utilisant des matériaux magnéto-diélectriques en bande VHF." Thesis, Rennes 1, 2019. http://www.theses.fr/2019REN1S041/document.
Full textAirplanes with multiple navigation and communication systems require broadband VHF antennas. Reduce the size of these antennas is a major challenge while keeping good performances. This thesis proposes new configurations of low profile antennas using new nanocomposite non-conductive materials consisting of magnetic nanoparticles developed at Lab-STICC. A broadband planar monopole has been developed and optimized with a 60% miniaturization rate thanks to the use of a high permeability and low loss magneto-dielectric material covering only 5% of its surface. The experimental results, in almost perfect agreement with the simulations, show that the radiation pattern is omnidirectional and that the polarization is vertical, with a good level of gain. The planar monopole antenna inserted in a MMD of limited dimensions with losses was modeled by a new multi-resonant equivalent circuit. This circuit is developed from the input impedance of the antenna and the characteristics of the MMD. and validated by the simulations with a perfect agreement between the results