To see the other types of publications on this topic, follow the link: Anesthesiology Instruments Design and construction.
Journal articles on the topic 'Anesthesiology Instruments Design and construction'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 journal articles for your research on the topic 'Anesthesiology Instruments Design and construction.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.
1
Edler, Alice A., Ruth G. Fanning, Michael I. Chen, Rebecca Claure, Dondee Almazan, Brain Struyk, and Samuel C. Seiden. "Patient Simulation: A Literary Synthesis of Assessment Tools in Anesthesiology." Journal of Educational Evaluation for Health Professions 6 (December 20, 2009): 3. http://dx.doi.org/10.3352/jeehp.2009.6.3.
Full textAbstract:
High-fidelity patient simulation (HFPS) has been hypothesized as a modality for assessing competency of knowledge and skill in patient simulation, but uniform methods for HFPS performance assessment (PA) have not yet been completely achieved. Anesthesiology as a field founded the HFPS discipline and also leads in its PA. This project reviews the types, quality, and designated purpose of HFPS PA tools in anesthesiology. We used the systematic review method and systematically reviewed anesthesiology literature referenced in PubMed to assess the quality and reliability of available PA tools in HFPS. Of 412 articles identified, 50 met our inclusion criteria. Seventy seven percent of studies have been published since 2000; more recent studies demonstrated higher quality. Investigators reported a variety of test construction and validation methods. The most commonly reported test construction methods included ?占퐉odified Delphi Techniques??for item selection, reliability measurement using inter-rater agreement, and intra-class correlations between test items or subtests. Modern test theory, in particular generalizability theory, was used in nine (18%) of studies. Test score validity has been addressed in multiple investigations and shown a significant improvement in reporting accuracy. However the assessment of predicative has been low across the majority of studies. Usability and practicality of testing occasions and tools was only anecdotally reported. To more completely comply with the gold standards for PA design, both shared experience of experts and recognition of test construction standards, including reliability and validity measurements, instrument piloting, rater training, and explicit identification of the purpose and proposed use of the assessment tool, are required.
2
Tavares, Luís, José Ferreira, and Alexandre Ricardo. "A multicriteria model to evaluate tenders for Green Procurement of Public Works." EUROPEAN JOURNAL OF PUBLIC PROCUREMENT MARKETS 1, no. 4 (2023): 22–49. http://dx.doi.org/10.54611/dtij7382.
Full textAbstract:
Public procurement is quite an important activity in the European Union as it corresponds to more than 13% of the GNP in the EU (2017), and public works account for more than €500 000 M, which is about 25% of the total public procured value. The construction sector is responsible for about 38% of energy-related carbon emissions and 50% of resource consumption. Therefore, procurement of public works (PPW) should be considered a strategic instrument to pursue sustainable policies, but, quite often, the award criterion does not consider the sustainability objectives. The authors present in this paper a new multicriteria model to evaluate tenders to award design or design and build contracts for public works, respecting the principles of public procurement expressed by the European Directives of 2014 and pursuing the sustainability objectives according to the so-called Green Procurement. This model can be easily applied as it is confirmed by its application to the study of the procurement of a new public hospital in Portugal.
3
Kretschmer, A., M. Zabek, K. Tran, and L. Hildebrand. "Legal instruments for the design of sustainable buildings." IOP Conference Series: Earth and Environmental Science 855, no. 1 (October 1, 2021): 012014. http://dx.doi.org/10.1088/1755-1315/855/1/012014.
Full textAbstract:
Abstract Currently the building sector is under high pressure: the lack of affordable housing in conurbations and the need to implement environmental performance strategies require concepts that incorporate user needs with planetary boundaries. Against the background of global population growth and a rising demand for resources, urban densification is regarded as a major global trend. The pressure on cities is already recognizable today and studies predict a growing tendency for the next three decades. This is a sensitive situation which provides not only the chance but also the urgent necessity to implement strategies to reduce climate change effects. Regulations are necessary to guide this process in the building sector. Timber construction as well as reused and recycled material show potential to be part of the solution. Against this background, the research deals with the status-quo of current legal instruments to design and construct sustainable buildings. This article provides an overview of the legal instruments in relation to sustainable building processes in the German construction industry with a focus on timber buildings. The relevant standards and guidelines for sustainable building design are investigated by literature review. This includes German Model Building Code (MBO), parts of the DIN standards, the German Building Code (BauGB) and the Building Usage Ordinance (BauNVO) as well as the Model Timber Construction Directive (M-HFHHolzR). The regulations are applied on a multi-residential building in Cologne and discussed whether regulations are enabler or obstacle for this specific project. The results of the study show the urgent need for more flexibility within current inner-city projects to pursue an environmentally friendly design and construction.
4
Мазур, Т. М. "АНАЛІЗ АЛГОРИТМІВ ПОБУДОВИ НАГРУДНОЇ ВИТОЧКИ В ЖІНОЧОМУ ПЛЕЧОВОМУ ОДЯЗІ." Fashion Industry, no. 1 (May 25, 2021): 34–42. http://dx.doi.org/10.30857/2706-5898.2021.1.1.
Full textAbstract:
Development of algorithms for designing a bust prominence dart in the construction base (СВ) of the top garments through the construction methodologies using the Julivi CAD means. Methodology: usage of the possibilities provided by the CAD program “Design-development of the basic constructions” by Julivi to prepare basic constructions of the women’s top garments through designing of the separate node using the visual programming method following diff erent construction methodologies. Peculiarities of bust prominence dart design for the construction basis in the women’s top garment using the module “Design-development of basic constructions” by CAD Julivi were studied. Algorithms of bust prominence dart design following diff erent design methodologies for CB of the women’s top garment in CAD Julivi program were provided. Sequence of bust prominence dart design (in accordance with two construction methodologies) using the instruments of visual programming is presented in the form of a table and the description of the construction element building procedure recorded by the CAD Julivi was also provided. Parametric reproduction of the panel front was performed to defi ne the construction quality of the separate element in the basic construction and the quality of schematic drawing areas matching for diff erent construction methodologies was illustrated. Algorithms for more reasonable node building using the instruments from the module “Design-development of basic constructions” by CAD Julivi were off ered.Scientifi c novelty: Created algorithm for reasonable execution of the separate construction mode in the women’s top garment using the CAD program instruments. Process sequence of the bust prominence dart design following diff erent methodologies and using software instruments was analyzed. The practical signifi cance: developed methodological provisioning for the usage of the “Design-development of basic constructions” module by CAD Julivi within the design of the construction sequence for the separate elements of the basic constructions of the women’s top garment and off ered algorithm s for bust prominence dart design using CAD without the processes of the further shoulder cut matching.
5
Placencia, Juan Pablo Yepez, Jim Murphy, and Dale Carnegie. "Survey of Hardware and Software Design Approaches for Mechatronic Chordophones." Computer Music Journal 43, no. 1 (January 2020): 38–58. http://dx.doi.org/10.1162/comj_a_00499.
Full textAbstract:
Mechatronic instruments can create complex sounds that computers and digital instruments have yet to offer. As a specific example, we explore mechatronic chordophones, which use strings as a sound generator and offer a wide array of parametric affordances. The purpose of this work is to review recent approaches for chordophone design and construction, and present current, state-of-the-art devices. We explore multiple mechatronic frames and their components, and we analyze the challenges of building and interacting with these machines. Finally, we review software and hardware approaches that have been implemented to enhance these instruments and to bridge technical and creative restrictions.
6
Li, Dong Dong. "The Design of Virtual Experiment Framework Based on ELVIS." Advanced Materials Research 1037 (October 2014): 161–64. http://dx.doi.org/10.4028/www.scientific.net/amr.1037.161.
Full textAbstract:
The virtual simulation experiment framework consists of hardware and software function modules, which are both designed in this thesis. The application of virtual experiment framework has changed the traditional teaching method to a large extent, reduced the cost of laboratory construction and management, which is of the first importance to realize the remote experiment teaching. Through virtual experiments, students' interest in knowledge is cultivated and innovation ability is enhanced. With the National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) and LabVIEW, we could take advantage of graphical programming and a complete suite of standard test instruments on computer and directly interface these instruments to circuits, which is the base of virtual experiment framework.
7
Wang, Jian Zhong, Lin Huang, Xiu Mei Feng, and Ling Li Wang. "Experimental Design of Magnetic Properties of Ferromagnetic Material Measurement Based on Virtual Instruments." Applied Mechanics and Materials 195-196 (August 2012): 285–90. http://dx.doi.org/10.4028/www.scientific.net/amm.195-196.285.
Full textAbstract:
In the teaching of the physics experiments, the construction and application of teaching research on the virtual experiment system is a newly hot spot, which is needed to be explored in depth at all levels continuously. The core technology of virtual experiment system is the virtual instrument. Based on the specific teaching practices, this article introduces the concrete details about our experiment on Magnetic properties measurement of ferromagnetic material, which is designed and developed with the virtual instrument software LabVIEW. The preliminary research here may play an important role in the ultimate construction of a relatively integral virtual experiment series of physics.
8
Karpushkin, A. S. "Foreign approaches to design, pricing and procurement in construction as market mechanisms to ensure competition." Smetno-dogovornaya rabota v stroitel'stve (Estimated and contractual work in construction), no. 6 (June 30, 2022): 4–17. http://dx.doi.org/10.33920/str-01-2206-01.
Full textAbstract:
The article considers market instruments for ensuring competition. The fundamental differences between domestic and foreign approaches are revealed. Recommendations on improving domestic legislation in terms of design, pricing, procurement and construction are given.
9
Jiang, Chao, Chen Guang Zhang, and Xu Zhang. "Standardized Design of Warehouse Management for Electric Energy Measuring Center." Advanced Materials Research 749 (August 2013): 634–40. http://dx.doi.org/10.4028/www.scientific.net/amr.749.634.
Full textAbstract:
Warehouse management is an important content in the electric energy measuring center standardization construction and a very important part in the full life cycle management of electrical energy measuring instruments. By introducing intelligent warehousing technology, a kind of standardized work flows was proposed based on the production characteristics of the instruments. It combines with the advantages which are high degree of automation and highly integrated. The work flow specificities the new share energy meter storage process, energy meter of storage processes for Verification, as well as distribution warehousing processes. The overall architecture of Energy Metering Centre production scheduling platform was proposed which divided into field equipment layer, monitoring and management layer, production scheduling layer. The design of the layers were introduced.
10
Cambier, Charlotte, Waldo Galle, and Niels De Temmerman. "Research and Development Directions for Design Support Tools for Circular Building." Buildings 10, no. 8 (August 18, 2020): 142. http://dx.doi.org/10.3390/buildings10080142.
Full textAbstract:
To support the construction sector in its transition to a circular economy, many design instruments and decision support tools have been and are still being developed. This development is uncoordinated and raises confusion among building designers and advising engineers, slowing down the tools’ adoption in practice. Moreover, it is unclear if the available design tools are able to fulfil the needs of design professionals at all. Therefore, this research identifies the knowledge challenges for the “supply and demand” of design tools for a circular construction practice. It focuses on Flanders, given the importance the topic receives in the region’s policy programme and among practitioners. This study builds on a thorough literature review, and on inventorying and categorising instruments and ongoing developments. By comparing that review with the needs that were identified during interviews with a focus group, it was possible to pinpoint designers’ needs for support tools and outline three urgent research tracks. More generally, it was found that the needs of our focus group are only partially reflected by the available design tools and the ongoing developments. This identified mismatch advocates for a more participatory and practice-oriented research approach when developing design support tools for circular building.
11
del Rio, Richard A., Russell J. Branaghan, and Rob Gray. "Design Features of Wearable AR Information Display for Surgery and Anesthesiology." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 60, no. 1 (September 2016): 571–75. http://dx.doi.org/10.1177/1541931213601131.
Full textAbstract:
The medical community is constantly looking for technological solutions to reduce use-error and improve procedures to benefit the healthcare system worldwide. One area that has seen frequent improvement in the past few decades due to improved computing capabilities, lower cost and better displays has been augmented reality (AR) (Sauer, Khamene, Bascle, Vogt, & Rubino, 2002). In an operating room, surgeons and anesthesiologists are required to attend to a patient while receiving information from many different displays and instruments. This paper analyzes the human factors components of various AR devices and information display techniques to provide design guidelines for display configurations of wearable, medical AR devices that will improve upon current methods of information presentation in the operating room.
12
Sulistyo, Totok, Karmila Achmad, and Rahmad Bangun Giarto. "GEOMATICS ACCURACY AND PRECISION OF DETERMINATION HORIZONTAL DISTANCES IN STAKE OUT MEASUREMENT USING THEODOLITE." JUTEKS : Jurnal Teknik Sipil 4, no. 2 (October 1, 2019): 74. http://dx.doi.org/10.32511/juteks.v4i2.612.
Full textAbstract:
Stake-Out is a processes of transferring construction design to the real world so that Stake Out is highly imperative in a construction job. Stake-Out jobs in the middle and lower levels of construction industry are still using theodolite accompanying with calculator rather than using high-end instruments. The results of the study show that theodolite has lower accuracy compared to Total Station and other high-end instruments, such as GPS Geodetic and Laser Scanner. This research is aimed to determine the accuracy and precision of Theodolite in determining the horizontal distance of Stake Out measurement which staff reading is simulated using android App (Stake Out Guide). The results of experiment showed that the accuracy of Theodolite is 0.025 m meanwhile the precision is 0.12%.
13
Politi, Violetta. "Development of organizational and economic instruments for enhancing the innovation process in major construction." E3S Web of Conferences 263 (2021): 05053. http://dx.doi.org/10.1051/e3sconf/202126305053.
Full textAbstract:
Objectively, there is discrimination in relation to investments in inventions and research activities, since the risk is higher, the inhibition of funds is longer, and the investment analysis of innovative projects is longer and more laborious. Consequently, in order to enhance innovation in the construction industry, it is necessary to develop specific instruments for state stimulation. One of these tools is a priority form of government funding for projects with a high level of use of innovations in architectural and design solutions. The development of a methodology for assessing the level of novelty and progressiveness of design solutions will make it possible to make their justified selection for priority government funding
14
Lysenko, I. E., M. A. Denisenko, and A. S. Isaeva. "Design and Simulation of the Two-Axis Micromachined Angular Rate Sensor." Journal of Physics: Conference Series 2086, no. 1 (December 1, 2021): 012176. http://dx.doi.org/10.1088/1742-6596/2086/1/012176.
Full textAbstract:
Abstract Micromechanical inertia sensors - accelerometers, gyroscopes, multisensor modules and systems based on them - are widely used in navigation, for compensation of other instruments (accelerometers, inclinometers) or stabilization (gyroscopes). The paper presents the designed construction of a MEMS angular rate sensor with two sensitivity axes, topology of gyroscope is presented; modal and static analysis is performed using ANSYS CAD; simulation results of micromechanical gyroscope operation under the action of angular velocities using VHDL-AMS are presented.
15
Sekiguchi, K. "Prospects for Studying the Local Group with the Subaru Telescope." Symposium - International Astronomical Union 192 (1999): 503–7. http://dx.doi.org/10.1017/s0074180900204579.
Full textAbstract:
Subaru Telescope is an 8.3-m diameter optical-infrared new-generation telescope under construction on Mauna Kea, Hawaii. The telescope is expected to be operational by early 1999. The current status of its construction and the plans for its instrumentation are presented. The design specifications of the telescope and its seven common user instruments are described, with emphasis on their application to studies of the Local Group.
16
Boaventura-Netto, Paulo Oswaldo. "Combinatorial instruments in the design of a heuristic for the quadratic assignment problem." Pesquisa Operacional 23, no. 3 (December 2003): 283–401. http://dx.doi.org/10.1590/s0101-74382003000300001.
Full textAbstract:
This work discusses the use of a neighbouring structure in the design of specific heuristics for the Quadratic Assignment Problem (QAP). This structure is formed by the 4- and 6-cycles adjacent to a vertex in the Hasse diagram of the permutation lattice and it can be adequately partitioned in subsets of linear and quadratic cardinalities, a characteristics which frequently allows an economy in the processing time. We propose also a restart strategy and a mechanism for generating initial solutions which constitute, together with the neighbouring structure, a possible QAP-specific heuristic proposal. For the construction of these instruments we used the relaxed ordered set of QAP solutions.
17
Lyon, Eduardo. "Autopoiesis and Digital Design Theory: CAD Systems as Cognitive Instruments." International Journal of Architectural Computing 3, no. 3 (September 2005): 317–33. http://dx.doi.org/10.1260/147807705775377366.
Full textAbstract:
In contrast to traditional models of design process fundamentally defined by the abstract manipulation of objects, this study recognizes that the resources available for rethinking architecture are to be found in a reformulation of its theory and practice. This reformation should be based on non-linear design processes in which dynamic emergence and invention take the place of a linear design process fixed on a particular object evolution. Advances in computation thinking and technology have stimulated the design and formulation of a large number of design software. Its elaboration supposes a new conceptualization of our discipline's knowledge, in a body of principles and regulations, which commands the artifact's design and its realization; therefore, it constitutes a preliminary datum for its comprehension, and thereby is of theoretical importance. Despite the continuous increment of power in computers and software capacities, the creative space of freedom defined by them acting as cognitive instruments remains almost unexplored. Therefore, we propose a change from a design knowledge based on objects to one focused on design as a network of processes. In addition, this study explores the concept of Distributed Cognition in order to redefine the use of digital tools in design process as Cognitive Instruments.
18
Kotašová, Daniela. "Domestic Music Making and its Instruments: Zpráva z mezinárodní konference hudebních nástrojů v Edinburghu." Muzeum Muzejní a vlastivedná práce 60, no. 1 (2022): 64–68. http://dx.doi.org/10.37520/mmvp.2022.007.
Full textAbstract:
June 2022 saw the biennial conference on musical instruments organized by The Galpin Society in association with The University of Edinburgh. The papers presented a wide range of organological topics related to the fields of stringed instruments and especially wind instrument (woodwind and brass). During the conference, various options for the research methodology were presented: from the description of the construction and technical features of the instrument, decoration and design, through archival research, socio-economic aspects of production and trade, to the acoustic properties of the instruments. There was also the topic of the use of social media.
19
Shiu, Kwok-Nam, and Henry G. Russell. "Effects of time-dependent concrete properties on prestress losses." Canadian Journal of Civil Engineering 14, no. 5 (October 1, 1987): 649–54. http://dx.doi.org/10.1139/l87-095.
Full textAbstract:
Prestress losses were calculated for a segmental concrete box-girder bridge. Results were based on the time-dependent investigation of the Kishwaukee River Bridge constructed by the balanced cantilever method. Instruments were installed in the bridge during construction to measure the time-dependent deformations. Short- and long-term properties of concrete used in the instrumented segments were measured. With the actual construction schedule and the measured concrete properties, time-dependent nonlinear analyses were performed. Prestress losses were calculated for each construction step. Time-dependent variations of prestress losses during and after construction are presented. Comparisons between design concrete properties and measured values and between analytical prestress losses and design values were made. Key words: mechanical properties, creep properties, shrinkage, prestressing, losses, prestressed concrete bridges, measurement, analysis.
20
Irwan, Anas, Muhammad Arsyad, and Kaharudin Arafah. "Pengembangan Instrumen Penilaian Sikap Praktikum Fisika Dasar I Pada Mahasiswa Jurusan Pendidikan Fisika Uin Alauddin Makassar." Jurnal Pendidikan Fisika dan Teknologi 4, no. 2 (November 1, 2018): 168. http://dx.doi.org/10.29303/jpft.v4i2.763.
Full textAbstract:
This research is a development research (research and development) which aims to analyze the results of the development of the instrument of assessment of Basic Physics I practicum for students majoring in Physical Education UIN Alauddin Makassar theoretically and empirically in order to obtain a valid, reliable and feasible assessment. The development of assessment instruments refers to the design of test instrument development according to Kaharuddin Arafah which consists of 7 steps of development, namely: (1) Determining the measuring scale, measuring objectives and construction of measuring instruments, (2) Construction outcome measuring instruments, (3) Validation of contents, (4) Temporary measuring instruments, (5) Target of respondents for the trial, (6) Reliability, and (7) Measuring instruments ready for use. This research was tested in the Department of Physics Education Semester I 2016/2017 UIN Alauddin Makassar. The results of the study were obtained from the Basic Physics I practicum assessment instrument that produced 8 valid items, theoretically with reliability 1.0 and empirically reliability of 73.60%. The results of the study were obtained from the practicum assessment instrument that was declared valid and reliable and feasible to be used as a standard assessment instrument in the Department of Physics Education, UIN Alauddin Makassar.
21
Lu, Jinshuai, and Hongchang Liu. "Design and Construction Management of Automation Instruments in Petrochemical Enterprises Under the Background of Artificial Intelligence." Journal of Physics: Conference Series 1915, no. 4 (May 1, 2021): 042027. http://dx.doi.org/10.1088/1742-6596/1915/4/042027.
Full text
22
Wollert, Juergen, Markus Lehne, and Bernd E. Hirsch. "Modeling for Ship Design and Production." Journal of Ship Production 8, no. 01 (February 1, 1992): 48–58. http://dx.doi.org/10.5957/jsp.1992.8.1.48.
Full textAbstract:
The flexible operating and changing of the complex one-of-a-kind shipbuilding environment has to be based on adequate concepts and instruments to handle the related controlling, planning and implementation tasks. Product modeling defines the physical and application driven product-related information. It is of basic importance to support this environment, especially the concurrent engineering functions, during the whole product life cycle. Process modeling supports the implementation and operation of complex CIM (Computer Integrated Manufacturing) oriented processes. In this paper some modeling applications within European shipbuilding research and development projects will be highlighted from the viewpoint of an integrated product and process modeling approach. The following projects referenced: NEUTRABAS (Neutral Database for Complex Multifunctional Systems) explores a broad application field of product information for ship steel structure and outfitting systems; ROCOCO (Real Time Monitoring and Control of Construction Site Manufacturing) develops a CIM application and demonstrates this application within the pipe outfitting environment of a ship berth construction site; and MARIN-ABC (Marine Industry Applications of Broadband Communication) demonstrates new applications and services in the maritime transportation business based on future mobile satellite networks.
23
Malpica Gutierrez, Johan S., Ismael A. Fernández Peña, and Fernando Martínez Santa. "Design, construction and implementation of relative humidity and temperature climatic chamber for metrology laboratory." Journal of Physics: Conference Series 2135, no. 1 (December 1, 2021): 012003. http://dx.doi.org/10.1088/1742-6596/2135/1/012003.
Full textAbstract:
Abstract For the calibration of thermohygrometers it is necessary to have a means of generating temperature and relative humidity for this reason in this development we will build a climatic chamber which will generate and control these two magnitudes. For the generation of temperature a thermoresistance was used and the decrease of relative humidity was done through a silica gel trap through which the air inside the chamber is recirculated with the use of a vacuum pump. On the other hand, an ultrasonic humidity generator also known as fogger was used to increase the relative humidity. For the construction of the chamber, acrylic was used as the main material, since it is translucent and facilitates the visualization of the thermohygrometers’ indications. For the control of the process variables such as temperature and relative humidity, an Arduino card was used, which through PWM pulse width modulation, the control was performed achieving a variation of 0.3 °C and 2 %RH, which will be evaluated by an accredited laboratory in the characterization of isothermal media certified by ONAC, since it is in this way that the inhomogeneity, stability and thermal load of the medium, components that affect the uncertainty of the instruments under calibration, are evaluated. It should be remembered that this development was carried out in order to create an air medium with which temperature and relative humidity measuring instruments can be calibrated in the metrology laboratory VALIDACIONES Y METROLOGIA LM S.A.S., since it is in the process of growth and one of its main objectives is to be accredited in the magnitudes of temperature and relative humidity before the accreditation body in Colombia (ONAC), which is the entity that will finally give the technical approval to release the chamber and put it into operation.
24
Ikawati, Ikawati, Iing Dwi Lestari, Dwi Ratnasari, and Indah Juwita Sari. "Development of Portfolio Assessment Instruments Based on Scientific Literacy on the Archaebacteria and Eubacteria Concepts." International Journal of Biology Education Towards Sustainable Development 2, no. 1 (June 30, 2022): 34–43. http://dx.doi.org/10.53889/ijbetsd.v2i1.130.
Full textAbstract:
This research aimed to develop the portfolio assessment instruments based on scientific literacy on the concept of the archaebacteria and eubacteria and to know the feasibility of the product. The research method was used Research and Development with research design: problem pontential and data collection, design of product, product development. The result of this research is portfolio assessment instruments based on scientific literacy with content cognitive assessment, affective assessment, psychomotor assessment, lesson plan, portfolio assessment, and presentation product and was judged by expert judgment consist aspect: construction, validity, language, scientific literacy and completeness used expert assessment sheets. The data obtained was analyzed with qualitative and quantitative. Based on the results of the portfolio assessment instruments based on scientific literacy on the concept of the archaebacteria and eubacteria obtained was 87,8% with category very good and feasible to use.
25
Jadallah, Dina. "Colonialist Construction in the Urban Space of Jerusalem." Middle East Journal 68, no. 1 (January 15, 2014): 77–98. http://dx.doi.org/10.3751/68.1.14.
Full textAbstract:
This article examines the matrix of Israel's urban interventions using territorial and demographic engineering to transform Jerusalem into a closer approximation of Zionist ideological conceptualization. It argues that the state deploys archaeological, cultural, sociopolitical, territorial, and urban design instruments to deconstruct or re-narrate the other histories and characteristics of the city in order to preempt alternative sovereignties. The asymmetrical power of the Israeli state is constantly challenged in urban spaces and quotidian practices by Palestinians who hold competing discourses. Palestinians contest Israel's conceptualization through discourses that do not ascribe to the state project, emphasizing that identity is not exclusive to one ethnicity or religion, while working to sustain and strengthen an alternative sovereignty.
26
Yuniarto, Bambang, Rivo Panji Yudha, and Aulia Sholichah Iman Nurchotimah. "Validity and reliability: Social attitude assessment instruments." Communications in Humanities and Social Sciences 2, no. 1 (August 30, 2022): 1–6. http://dx.doi.org/10.21924/chss.2.1.2022.22.
Full textAbstract:
The purpose of this study is to develop an instrument for assessing social attitude competence whose constructs are valid according to experts and empirically valid and reliable based on field trials in Civics learning for high school students. This research was conducted through a quantitative descriptive approach at SMP Negeri 1 Gebang. Social attitude assessment instrument was used and it contained 28 items and an expert validation observation sheet. Design validation was done by reviewing the product design by three experts (expert judgment). The study was conducted to determine the feasibility of the instrument from the aspect of substance, construction, and language of the social attitude assessment instrument. Advice was given by experts after doing research to get approval, which was later used as a benchmark to state that the product was logically valid. The measurement of the content validity of social attitude statements was conducted using Likert scale and the reliability test used the Rasch Model approach. The results of the field test showed that the social attitude assessment instrument was valid in terms of content and constructs. The reliability test using the Rasch model approach showed that the product reliability was categorized as satisfactory. The final product is considered suitable for direct use by teachers and can be further developed with grid references.
27
Mansfield, John F., Michael D. Thouless, Justin A. Stefano, and Judd Holbrook. "Design and Construction of a Quantitative Uniaxial Straining Stage For The Environmental SEM." Microscopy and Microanalysis 4, S2 (July 1998): 268–69. http://dx.doi.org/10.1017/s1431927600021462.
Full textAbstract:
The environmental scanning electron microscope (or Environmental SEM) is a powerful tool in the materials science laboratory. The large sample chamber and ability to operate in a very poor vacuum (>5Torr) makes it an ideal device for a wide variety of in-situ studies. A three point bending stage has been used in the ElectroScan E3 environmental SEM at the University of Michigan for over four years. The stage is extremely flexible and can be used to view samples in both planar and transverse views. It also allows for quantitative recording of the stress and strain exerted on the sample via a load cell and a linear variable differential transducer. The output s of the load cell are acquired into an Apple Macintosh computer via a National Instruments analog-to-digital acquisition card. To extend the capability of EMAL's in-situ tensile testing laboratory, a uniaxial tensile stage has been constructed in collaboration with the Department of Mechanical Engineering and Applied Mechanics.
28
Li, Xiu, Fu Xin Gao, Lin Fei Zhou, and Tian Xiang Yan. "Design of Prototype System for Seafloor Observatory Network." Applied Mechanics and Materials 302 (February 2013): 740–45. http://dx.doi.org/10.4028/www.scientific.net/amm.302.740.
Full textAbstract:
Developing the seafloor observatory network(SONet) is very significant for the human to explore the ocean resources. The information system of seafloor observatory network provides a platform for scientists to research the seafloor activities, which is a kind of open and complex system referring to diverse engineering and disciplines. The data acquiring, storing and management of the observatory instruments are the major parts of information integration. A prototype system based on the SOA(Service-oriented Architecture) is designed to manage information and knowledge in SONet. The SOA architecture, interface and device encoding mechanism are presented. Benefit from this, construction and application of the system can provide a uniform information and knowledge platform in the ocean field.
29
Solomon, Russell. "The Social Construction of Human Rights Legislation: Interpreting Victoria’s Statutes through their Limitations." Deakin Law Review 22, no. 1 (February 23, 2018): 27. http://dx.doi.org/10.21153/dlr2017vol22no1art721.
Full textAbstract:
Interpreting human rights statutes through their objectives encourages their description as empowering instruments with their hortatory language emphasising the potential of each instrument to protect and promote rights. This article examines Victoria’s Equal Opportunity Act 2010 (Vic) and Charter of Rights and Responsibilities Act 2006 (Vic) through a different lens and argues that a focus on their limitations and derogations offers a better understanding of the nature and extent of the human rights protection that each purports to provide.These limitations are no mere peripheral encumbrances and help shape the rights protecting functions of each statute. This article adopts a social constructivist approach to explain how, as socially constructed instruments, the operation of the limitations reveals an ambivalent role for each statute. The design and functionality of each statute, with their self-limiting provisions, means that each acts to sustain as well as challenge the existing power relationships and social arrangements.
30
Lam, Steve, and Albert Chan. "Engineering Surveying for the Construction of Railway Tunnels in Hong Kong." GEOMATICA 65, no. 2 (June 2011): 167–74. http://dx.doi.org/10.5623/cig2011-025.
Full textAbstract:
This paper provides an overview of the accuracy standards, specifications, and recent advances of engineering survey operations for the design and construction of railway tunnels in Hong Kong. It covers geodetic control, deformation monitoring surveys, detail mapping, geometric modelling, setting-out, asbuilt surveys and total quality management (TQM). Recent advances include an integrative approach to: (1) combine measurements collected by geodetic and geotechnical systems including interferometric synthetic aperture radar (InSAR) in monitoring ground displacements and structural deformation at local and regional scales; (2) map geospatial data into computer aided design (CAD) formats and geographic information systems (GIS) by both conventional and mobile surveying systems; (3) collect as-built data of railway tracks and tunnels by positioning instruments, track sensors and laser scanners together; (4) incorporate Outsource Plan into the TQM system under ISO 9001:2008.
31
Wang, Yong Ning. "LabVIEW-Based Design of Virtual Instruments and R&G of Virtual Experimental System." Applied Mechanics and Materials 513-517 (February 2014): 1756–59. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.1756.
Full textAbstract:
With the popularization of network technology, the computer technology is developing rapidly coupled with the emergence of virtual instrument technology. In this context, virtual experiment, an effective complement to the development of the traditional experimental method, has very broad spectrum of application in the field of education, measurement, and even other research areas. Thus, virtual experiment has become an important future development of experimental teaching. Based on analysis of the history and current status of the existing virtual laboratory at home and abroad, as well as the technologies used to accomplish a virtual experiment, this thesis makes a comprehensive study to analyze the construction of the virtual experiment system, including the basic theory of its establishment, the network environment, application classification, the specific tectonic model and technical methods and its development and applications.
32
Lin, Zhuangqin, Qiu Xie, Yingbin Feng, Peng Zhang, and Yu Yang. "AN OPTIMAL C&D WASTE LOGISTICS NETWORK DESIGN FROM CONTRACTORS’ PERSPECTIVE." Journal of Green Building 15, no. 3 (June 1, 2020): 121–37. http://dx.doi.org/10.3992/jgb.15.3.121.
Full textAbstract:
ABSTRACT The construction industry is one of the major producers of municipal solid waste. Although there are many studies in municipal solid waste management, the research on the recovery of recyclable building material from construction sites remains limited. This paper addresses the optimal design issue of the construction and demolition (C&D) waste logistics network based on the features of the construction industry from the contractors’ perspective. The purpose of this paper is to provide an optimal C&D waste recycling network decision (RND) model considering the change of construction sites location over time. A multi-period and multi-objective mixed-integer linear programming model was developed to minimize the cost of C&D waste disposal for contractors, and to minimize the carbon emissions from C&D waste transportation. An application study was conducted to assess the performance of the RND model. Through some sensitivity analysis experiments based on an immune genetic algorithm, the influences of environmental policies and carbon tax policy on improving the recycling rate of C&D waste and reduce the carbon emission were explored. The findings of this research suggest that: (1) a RND model with the feature of the construction industry developed in this paper can effectively optimize the C&D waste logistics network; (2) government policies and laws are valid political instruments to improve the recycling rate of C&D waste; (3) the carbon-tax analyses demonstrate that a carbon tax policy can effectively reduce carbon emissions.
33
Kaprata, Gentian. "The Urban Dimension of the Albanian Transition Cities Was Damaged as a Result of the ‘Big Government’ and Not Its Absence: An Assessment in Relation to the Planning Instruments!" European Journal of Social Science Education and Research 7, no. 3 (October 12, 2020): 50. http://dx.doi.org/10.26417/592mfj61f.
Full textAbstract:
Albanian inhabited cities and centres have undergone chaotic developments in the years of transition, and this has come as a result of development not based on previous territorial and urban planning. Thus, construction, urban and territorial development in the transition years has not been the result of the implementation of previously approved territorial and urban planning instruments. This has come as a result of the lack of territorial and urban plans (local or national), which would precede construction and urban development with the aim of making this development smart, sustainable and comprehensive. In this context, we have made an observation in attempt to find the reasons for the lack of territorial and urban planning instruments in relation to governance. Our concern is focused on the question: has the scope of governance been so narrow that it has left out the task of drafting and approving territorial planning instruments; or was their absence for other reasons? As will be presented in this paper, transitional governments have not lacked: neither sectoral legislation that obliges the implementation of planning instruments; nor public institutions charged by law specified by duties in this field; nor public budget funding and foreign donors for their design. In contrast, it has been the characteristics of the left ‘big government’ and the public irresponsibility that characterize what have hindered the drafting and adoption of territorial and urban planning instruments.
34
KAPLIŃSKI, Oleg. "INNOVATIVE SOLUTIONS IN CONSTRUCTION INDUSTRY. REVIEW OF 2016–2018 EVENTS AND TRENDS." Engineering Structures and Technologies 10, no. 1 (April 27, 2018): 27–33. http://dx.doi.org/10.3846/est.2018.1469.
Full textAbstract:
The paper presents an overview of innovative solutions in Construction Industry (CI) between 2016 and 2018. Trends in events within CI were compiled mainly on the basis of reports, to a large extent originating from the US market.Directions and conditions of development of CI (in terms of design, technology and socio-economic sense) are considered. The importance of issues related to digitization, integrated activities (from integrated management to the integrated BIM), and partly augmented reality were highlighted. An attempt to synthesize new instruments in Construction Management has been presented.
35
Muzakki, Naufal Ahmad, Bambang Supriatno, and Sri Anggraeni. "Rekonstruksi Desain Kegiatan Laboratorium (DKL) pada Materi Bioteknologi dengan Pendekatan Saintifik." BIOEDUSAINS:Jurnal Pendidikan Biologi dan Sains 4, no. 2 (August 9, 2021): 136–45. http://dx.doi.org/10.31539/bioedusains.v4i2.2329.
Full textAbstract:
This study aims to analyze the design of laboratory activities on Biotechnology materials and carry out reconstruction. The method used is descriptive qualitative and sampling is done by purposive sampling with five DKL. The analysis conducted on DKL is measured in terms of components of competence, practicality and knowledge construction. The results showed that competence and knowledge construction components were still low and the practical components had been met. In conclusion, many DKL on Biotechnology material still cannot support competence and knowledge construction.
Keywords: Design Analysis of Laboratory Activities, Biotechnology, Laboratory Activities
36
Morishita-Steffen, N., A. Laukkarinen, T. Lewis, S. Wolny, R. Peuhkuri, J. Vinha, and T. Bednar. "CIB W040: International Surveys Considering Moisture Safety in Buildings During Design and Construction." Journal of Physics: Conference Series 2069, no. 1 (November 1, 2021): 012042. http://dx.doi.org/10.1088/1742-6596/2069/1/012042.
Full textAbstract:
Abstract We conducted comparative surveys of design consultants in three countries to determine current knowledge and experienced moisture problems. The study is part of the CIB W040 research roadmap needs analyses for realigning research efforts with stakeholder requirements for moisture safety. Survey results show that a third of construction projects in the last five years were affected by moisture problems, even though practitioners applied multiple preventative measures at least some of the time. Water installations caused approximately 20 % of the moisture damage. In each country, preventing moisture damage was necessary; the means to address problems varied, with no one dominating solution. Design and construction guidelines were more helpful than the building code requirements. Information is available, but designers need dedicated time and budget for implementing better moisture safety. A quantitative goal is to increase the frequency of moisture safety measures while increasing the availability of tools. The usefulness of selected measures and instruments is strongly case-specific. Subtopic analysis such as causes of moisture damage due to leaky water installations needs more detailed investigation. Further research is needed building upon the online survey results to develop intelligent tools preventing moisture damage in the design, construction, and building occupancy phases.
37
Cerveró-Meliá, Ernesto, Salvador F. Capuz-Rizo, and Pablo Ferrer-Gisbert. "Leonardo da Vinci’s Contributions from a Design Perspective." Designs 4, no. 3 (September 18, 2020): 38. http://dx.doi.org/10.3390/designs4030038.
Full textAbstract:
The figure of Leonardo da Vinci has been extensively studied. In fact, the Leonardiana Library brings together tens of thousands of titles on Leonardo and his work. During the second half of the 20th century, various treaties were published focusing on Leonardo’s activity as an engineer, and more recently, an increasing number of scientific articles that focus on certain aspects of the prolific work of the genius such as construction, mechanics, strength of materials, etc. have been published. This article analyses the main contributions of the Tuscan genius in the field of design focusing on his processes for generating new solutions, his developments regarding graphic representation techniques, his improvements in plotting and measuring instruments, and how some of his devices were implemented and continue to maintain their usefulness.
38
Chen, Yanhu, Canjun Yang, Dejun Li, Bo Jin, and Ying Chen. "Design and Application of a Junction Box for Cabled Ocean Observatories." Marine Technology Society Journal 46, no. 3 (May 1, 2012): 50–63. http://dx.doi.org/10.4031/mtsj.46.3.4.
Full textAbstract:
AbstractCabled ocean observatories enabling large amounts of power and two-way communication bandwidth for underwater experiments are a future approach for studying the oceans. On April 21, 2011, at Monterey Bay, California, USA, a network node composed of a junction box (JBox) and three scientific instruments was deployed at the Monterey Accelerated Research System (MARS) site for a 6-month uninterrupted sea trial. The JBox is a facility that can provide multiple wet-mateable connections for various instruments. Each connection can draw 500 W of power and has 10/100 Mbit/s network communication. The current study presents the design and construction of the JBox with focus on the following aspects: a power distribution system with high reliability; a flexible springloaded mechanical structure for heat dissipation; communication that incorporates various data protocols; and self-protection against faults like over-current, short fault, ground fault, and flooding. The deployment and operation of the JBox is described. The sea trial results show that the technologies and methods applied on the JBox and the deploying approach are applicable and worthy of consideration for long-term cabled ocean observatories.
39
Both, Arnd Adje. "Understanding the Quadruple Flutes of Teotihuacan, Mexico." Heritage 5, no. 1 (January 11, 2022): 157–69. http://dx.doi.org/10.3390/heritage5010009.
Full textAbstract:
This paper presents the results of a study on the quadruple flutes (multiple pipes) from the UNESCO World Heritage Centre of Teotihuacan, Mexico, based on a thorough examination of the fragmented, restored and partly reconstructed archaeological finds and the manufacture and subsequent test of a series of playable reproductions with a refined reconstructive design. For the latter, organological features, such as the diameter, number and position of the fingerholes/tone holes and the length of the individual pipes of the restored finds are challenged and a new design is proposed that might be closer to the original construction of the Teotihuacan instruments. The study reveals a better understanding of the particular construction, acoustics and musical possibilities of the Teotihuacan quadruple flutes.
40
Sutrisno, Sutrisno, and Asih Widi Wisudawati. "Grand Design Instrument of Potential Abilities for Placement Test." Edukasia : Jurnal Penelitian Pendidikan Islam 15, no. 1 (May 19, 2020): 1. http://dx.doi.org/10.21043/edukasia.v15i1.6835.
Full textAbstract:
This research aims to develop potential ability instruments for placement tests in graduate degrees. This study used the research and development instrument made by Hambleton and Jones sequences. The potential abilities measured by the instrument are academic potential and language skills. The product was reviewed by professional assessor and used in admission for selection in the academic years 2016/2017. The professional assessor reviewed the content, test construction, and language aspect. The construct and content validity from the professional assessor reached a good level with minor revision for the next selection. Ultimately, the results of the reviewing process are the potential academic test must not measure prior knowledge but the initial potential of the candidate and test for language should be emphasized on prior knowledge for Islamic study.
41
Odngam, Soontorn, Chaiyut Preecha, Prapaiwan Sanwong, Woramet Thongtan, and Jiraphon Srisertpol. "Precision Analysis and Design of Rotating Coil Magnetic Measurements System." Applied Sciences 10, no. 23 (November 27, 2020): 8454. http://dx.doi.org/10.3390/app10238454.
Full textAbstract:
This research presents the design and construction of measuring instruments for a dipole magnetic field using a rotating coil technique. This technique is a closed-loop speed-control system where a Proportional-Integral (PI) controller works together with the intensity measurement of the magnetic field through the rotating coil. It was used to analyze the impact on the accuracy of the electromagnetic at speed ranges of 60, 90, and 120 rpm. The error estimation in the measurement of the normal dipole and skew dipole magnet caused by the steady-state error of the speed control system and the rotational search coil in whirling motion are demonstrated. Rotating unbalance, shaft coupling, and misalignment from its setup disturbed the performance of the speed control system as a nonlinear system.
42
Gangemi, Nicholas, Nicholas Dutz, Amelia Vignola, Sarthak Regmi, Diego Turo, and Joseph Vignola. "Design, construction, and analysis of ukuleles as a method for teaching on the acoustic properties of stringed instruments." Journal of the Acoustical Society of America 148, no. 4 (October 2020): 2565. http://dx.doi.org/10.1121/1.5147120.
Full text
43
Prokhorov, Sergey. "Substitution of the labor market in the construction industry by technical and automated systems." MATEC Web of Conferences 170 (2018): 01086. http://dx.doi.org/10.1051/matecconf/201817001086.
Full textAbstract:
Construction is one of the oldest branches of the national economy. With the development of mankind, construction technologies, instruments of labor, machinery and mechanisms were developing as well. A large number of technological processes and operations performed in the design and construction of real estate, were carried out manually. Modern pace of economic development increase requirements on the speed of construction, its quality, as well as on reduction of the works labor intensity. The aim of the research was to determine the areas of construction in which it is advisable to replace manual labor, and also to develop recommendations for construction companies on the implementation of mechanization and automation in their production. During the research it was found that the area of design, calculation and logistics was automated almost 100%. At the same time, specifically when erecting buildings on Russian construction sites, up to 70% of the total labor volume is manual. Even in excavation and installation works, the level of manual operations of the machinists and accompanying workers is quite large. In the course of the analysis of the existing market of technologies and software products in the field of construction, there were determined the ways to reduce labor intensity and to increase the profitability of production.
44
Batrakova, A., Y. Dorozhko, E. Zakharova, and O. Kliuka. "ANALYSIS AND GENERALIZATION OF REGULATORY SUPPORT FOR GEODESIC SUPPORT OF ROAD CONSTRUCTION OBJECTS." Municipal economy of cities 4, no. 164 (October 1, 2021): 99–103. http://dx.doi.org/10.33042/2522-1809-2021-4-164-99-103.
Full textAbstract:
The transfer of the project to the site requires the performance of measurements and constructions with high accuracy. Changes in the technology of geodetic works related to the computerization of geodesy, the introduction into geodetic practice of electronic geodetic instruments and automated processing programs, require the introduction into production of both traditional methods of geodetic measurements and new technologies and methods of geodetic works. Despite the fact that geodetic works are an integral part of construction, in the regulations on surveys, design and construction of roads and man-made structures quite limited regulation of the content of work on the transfer of projects to the field, division work, executive surveys, geodetic quality control, accuracy requirements, etc. Given the current state of regulatory and legal support for geodetic support of road construction sites, it is advisable to develop a national standard for the implementation of geodetic surveying and geodetic control in the construction of road construction sites. This standard will supplement the main provisions of regulations on the construction of roads and transport facilities. With the growing volume of design, construction and overhaul of roads, it is necessary to standardize all stages of design and construction work, including those related to geodetic production. The development of technologies and methods of geodetic works related to the computerization of geodesy requires the introduction into production of both traditional methods of geodetic measurements and new technologies and methods of geodetic works. Based on the analysis and generalization of regulatory support for geodetic support of design and construction of roads and artificial structures, the need to develop a national standard for geodetic surveying and geodetic control in the construction of road construction as a supplement to the basic provisions of regulations on road construction and transport facilities.
45
Berlinghof, M., C. Bär, D. Haas, F. Bertram, S. Langner, A. Osvet, A. Chumakov, et al. "Flexible sample cell for real-time GISAXS, GIWAXS and XRR: design and construction." Journal of Synchrotron Radiation 25, no. 6 (October 8, 2018): 1664–72. http://dx.doi.org/10.1107/s1600577518013218.
Full textAbstract:
Since the properties of functional materials are highly dependent on their specific structure, and since the structural changes, for example during crystallization, induced by coating and annealing processes are significant, the study of structure and its formation is of interest for fundamental and applied science. However, structure analysis is often limited to ex situ determination of final states due to the lack of specialized sample cells that enable real-time investigations. The lack of such cells is mainly due to their fairly complex design and geometrical restrictions defined by the beamline setups. To overcome this obstacle, an advanced sample cell has been designed and constructed; it combines automated doctor blading, solvent vapor annealing and sample hydration with real-time grazing-incidence wide- and small-angle scattering (GIWAXS/GISAXS) and X-ray reflectivity (XRR). The sample cell has limited spatial requirements and is therefore widely usable at beamlines and laboratory-scale instruments. The cell is fully automatized and remains portable, including the necessary electronics. In addition, the cell can be used by interested scientists in cooperation with the Institute for Crystallography and Structural Physics and is expandable with regard to optical secondary probes. Exemplary research studies are presented, in the form of coating of P3HT:PC61PM thin films, solvent vapor annealing of DRCN5T:PC71BM thin films, and hydration of supported phospholipid multilayers, to demonstrate the capabilities of the in situ cell.
46
Rubin, Oleg D., Anton S. Antonov, Evgeny N. Bellendir, Ekaterina M. Kobochkina, and Oleg N. Kotlov. "Development of the design module of the software and hardware complex to ensure the safety of mutually influencing HPS." Structural Mechanics of Engineering Constructions and Buildings 15, no. 2 (December 15, 2019): 96–105. http://dx.doi.org/10.22363/1815-5235-2019-15-2-96-105.
Full textAbstract:
Relevance. As part of the implementation of the Federal Law No. 117-FZ “On the Safety of Hydraulic Structures”, it is necessary to continuously monitor the state of hydraulic structures and related facilities by equipping with control and measuring instruments. The development of modern computer complexes allows us to carry out and predict the state of objects by combining computational research and field observations. The work is aimed at organizing a comprehensive assessment of the state of the HPS and ensuring the safety of existing and projected mutually influential complexes. Aims of research. Improving the safety of the operated (under construction) complex of interfering hydraulic structures. Assessment of sufficient and highquality engineering and repair work carried out on the HPS. Development of recommendations for improving the efficiency of construction of new and modernization of operated hydropower facilities. HPS on the example of the Zagorsk HPS. Methods. Representation of the interaction ideology of various software systems of mathematical modeling, using control and measuring instruments data for calibration and verification of mathematical models. Results. The structure of the HSC calculation module was updated, systematization of the calculation models was carried out, interaction and transfer of the initial data to the calculation module of the software and hardware complex was revealed. The implementation of scientific research is aimed at improving the safety of the complex hydraulic structures.
47
Volovnik, N. S., O. V. Demidenko, V. A. Kazakov, and P. V. Gashkov. "Scientific and technical support at the construction and operation of cultural and sports facility." Вестник гражданских инженеров 17, no. 2 (2020): 100–108. http://dx.doi.org/10.23968/1999-5571-2020-17-2-100-108.
Full textAbstract:
The article is devoted to the actual problem of scientific and technical support of the universal large-span structure being built in Nefteyugansk. The design solution of the structure is considered and analyzed. During erection and operation of the structure, scientific and technical support has been provided. Instruments using non-destructive methods of inspection during construction have been selected and recommended, a system of sequential actions and stages during operation has been formed. The materials of the article allow planning in-kind measurements on the site during its construction and operation and may be the basis of further
48
Strano, Giorgio. "A New Approach to the Star Data of Early Planispheric Astrolabes." Medieval Encounters 23, no. 1-5 (September 22, 2017): 444–67. http://dx.doi.org/10.1163/15700674-12342255.
Full textAbstract:
Abstract During the twentieth century, scholars attempted to date early astronomical instruments by the scientific information discernable in their design. In particular, they devised “methods” to date planispheric astrolabes by the position of the vernal equinox on the calendar scale or by the precessional effect over the star coordinates. Such methods usually overlooked the many problems behind the instruments’ design and construction and the vicissitudes in a particular object’s history. Criticisms of the naiveté of the scientific approach did not persuade scholars with an astronomical background. They remained convinced of the supreme explanatory power that the present knowledge has for deciphering the past. The criticisms, instead, dissuaded scholars with a historical background from paying attention to the scientific data. They felt comfortable in analysing scientific relics on the basis of other types of evidence, such as textual sources, iconography, and style. The star coordinates of early planispheric astrolabes, as witnessed in their star pointers, can neither be regarded nor treated as the data of present science. Even if they do not describe the sky at the very moment of the making of the instruments, they may, nevertheless, be considered as non-textual sources that contain precious information. The star coordinates on the astrolabe retes may in fact connect groups of instruments with early star tables.
49
Gao, Ming Zhong, Hui Ma, and Xiang Chao Shi. "The Study of Optimal Design Method for Safe Monitoring in Tunnel." Advanced Materials Research 374-377 (October 2011): 2538–42. http://dx.doi.org/10.4028/www.scientific.net/amr.374-377.2538.
Full textAbstract:
The deformation tendency and order of magnitude for surrounding rock, expressing the state of rock mass, always change the construction schemes and treatment measures. The monitoring is the most important guarantee for safety construction and operation in civil engineering. However, due to the unsuitable monitoring sections and equipments selected, the budget remains stubbornly high. Most of business owners just carry out some of them or even give up the monitoring. This brings enormous hidden trouble to construct. Based on the Doupengshan highway tunnel, the optimal design method for safety monitoring was studied by comprehensive analysis of the geological conditions, the results of numerical modeling and monitoring data. The main aim of monitoring is to obtain the most poor condition information rather than all of them. It’s best to employ different type of monitoring instruments in order to verify results each other. That is to say, the monitoring of internal force or displacement can take the place of the convergence monitoring every two sections. The new monitoring design saves the budget 20% than origin one. The research result will guide the monitoring design for similar engineering.
50
Kakitahi, John Muhumuza, Henry Mwanaki Alinaitwe, Anne Landin, and Simon James Mone. "Impact of construction-related rework on selected Ugandan public projects." Journal of Engineering, Design and Technology 14, no. 2 (May 3, 2016): 238–51. http://dx.doi.org/10.1108/jedt-02-2014-0006.
Full textAbstract:
Purpose The purpose of this paper was to assess the magnitude of the impact of construction-related rework on selected project budgets and schedule in public building construction in Uganda. The magnitude of construction-related rework was the mean determined over construction contracts under a selected project and expressed as a percentage of the construction contract sum. Design/methodology/approach A single case multi-unit study approach was adopted. A case study protocol was prepared that included a checklist, observation schedules and an interview guide. The three instruments were used to collect data from building contractors and end-users (the teaching staff and medical assistants). Representatives of the client entity and the end-users provided sufficient project documentation and related supplementary information for the study. Findings Construction-related rework was predominantly attributable to design information omissions, unacceptable workmanship and inadequate supervision of the contractor. Lightning conductor, electrical and roofing installations were the building elements that had the highest frequency of rework. It was further determined that the mean percentage of rework related impact on project budget and schedule was approximately 4.53 and 8.42 per cent, respectively. Originality/value The findings inform policy makers about likely areas that contribute to significant wastage and value loss in quality management of public sector projects. The research advocates for improved data collection protocols, integration of adequate design management and a whole life value philosophy during the public building construction process.