Relevant bibliographies by topics / And readout

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'And readout'

Author: Grafiati
Published: 28 June 2021
Last updated: 13 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'And readout.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "And readout"

1

Leach, Robert W. "CCD Controllers." Symposium - International Astronomical Union 167 (1995): 49–56. http://dx.doi.org/10.1017/s0074180900056254.

Full text
Abstract:
The requirements of current and next generation CCD controllers in the areas of CCD device and system architectures, readout noise, number and speed of readouts are reviewed together with such operational requirements as system flexibility, power consumption, cost and weight. The basic components of a CCD controller are described, including the timing sequencer, clock drivers, video processor and computer interface. The capabilities and implementation of the CCD controller developed at San Diego State are reviewed. An upgraded controller is described to overcome limitations in the area of readout speed and efficient support of multiple readout capability.
APA, Harvard, Vancouver, ISO, and other styles
2

Lathwal, Shefali, and Hadley D. Sikes. "Assessment of colorimetric amplification methods in a paper-based immunoassay for diagnosis of malaria." Lab on a Chip 16, no. 8 (2016): 1374–82. http://dx.doi.org/10.1039/c6lc00058d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhou, You, and Bing Yan. "A responsive MOF nanocomposite for decoding volatile organic compounds." Chemical Communications 52, no. 11 (2016): 2265–68. http://dx.doi.org/10.1039/c5cc09029f.

Full text
Abstract:
A molecular decoding platform, which recognizes aromatic VOCs with distinctly different 2D readouts, has been developed by a responsive luminescent MOF nanocomposite. The VOC recognition is based on an unprecedented dual-readout orthogonal identification scheme.
APA, Harvard, Vancouver, ISO, and other styles
4

Yoshimura, Yuuki, Daisuke Suzuki, and Kanae Miyahara. "Evaluation of Image Quality of Readout Segmented EPI with Readout Partial Fourier Technique." Japanese Journal of Radiological Technology 73, no. 12 (2017): 1244–51. http://dx.doi.org/10.6009/jjrt.2017_jsrt_73.12.1244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Habenschuss, Stefan, Helmut Puhr, and Wolfgang Maass. "Emergence of Optimal Decoding of Population Codes Through STDP." Neural Computation 25, no. 6 (June 2013): 1371–407. http://dx.doi.org/10.1162/neco_a_00446.

Full text
Abstract:
The brain faces the problem of inferring reliable hidden causes from large populations of noisy neurons, for example, the direction of a moving object from spikes in area MT. It is known that a theoretically optimal likelihood decoding could be carried out by simple linear readout neurons if weights of synaptic connections were set to certain values that depend on the tuning functions of sensory neurons. We show here that such theoretically optimal readout weights emerge autonomously through STDP in conjunction with lateral inhibition between readout neurons. In particular, we identify a class of optimal STDP learning rules with homeostatic plasticity, for which the autonomous emergence of optimal readouts can be explained on the basis of a rigorous learning theory. This theory shows that the network motif we consider approximates expectation-maximization for creating internal generative models for hidden causes of high-dimensional spike inputs. Notably, we find that this optimal functionality can be well approximated by a variety of STDP rules beyond those predicted by theory. Furthermore, we show that this learning process is very stable and automatically adjusts weights to changes in the number of readout neurons, the tuning functions of sensory neurons, and the statistics of external stimuli.
APA, Harvard, Vancouver, ISO, and other styles
6

Kümmel, Anne, Hanspeter Gubler, Patricia Gehin, Martin Beibel, Daniela Gabriel, and Christian N. Parker. "Integration of Multiple Readouts into the Z' Factor for Assay Quality Assessment." Journal of Biomolecular Screening 15, no. 1 (November 25, 2009): 95–101. http://dx.doi.org/10.1177/1087057109351311.

Full text
Abstract:
Methods that monitor the quality of a biological assay (i.e., its ability to discriminate between positive and negative controls) are essential for the development of robust assays. In screening, the most commonly used parameter for monitoring assay quality is the Z' factor, which is based on 1 selected readout. However, biological assays are able to monitor multiple readouts. For example, novel multiparametric screening technologies such as high-content screening provide information-rich data sets with multiple readouts on a compound’s effect. Still, assay quality is commonly assessed by the Z' factor based on a single selected readout. This report suggests an extension of the Z' factor, which integrates multiple readouts for assay quality assessment. Using linear projections, multiple readouts are condensed to a single parameter, based on which the assay quality is monitored. The authors illustrate and evaluate this approach using simulated data and real-world data from a high-content screen. The suggested approach is applicable during assay development, to optimize the image analysis, as well as during screening to monitor assay robustness. Furthermore, data sets from high-content imaging assays and other state-of-the-art multiparametric screening technologies, such as flow cytometry or transcript analysis, could be analyzed.
APA, Harvard, Vancouver, ISO, and other styles
7

Asaadi, Jonathan, Martin Auger, Roman Berner, Alan Bross, Yifan Chen, Mark Convery, Laura Domine, et al. "A New Concept for Kilotonne Scale Liquid Argon Time Projection Chambers." Instruments 4, no. 1 (February 7, 2020): 6. http://dx.doi.org/10.3390/instruments4010006.

Full text
Abstract:
We develop a novel Time Projection Chamber (TPC) concept suitable for deployment in kilotonne-scale detectors, with a charge-readout system free from reconstruction ambiguities, and a robust TPC design that reduces high-voltage risks while increasing the coverage of the light-collection system and maximizing the active volume. This novel concept could be used as a far detector module in the Deep Underground Neutrino Experiment (DUNE). For the charge-readout system, we used the charge-collection pixels and associated application-specific integrated circuits currently being developed for the liquid argon (LAr) component of the DUNE Near Detector design, ArgonCube. In addition, we divided the TPC into a number of shorter drift volumes, reducing the total voltage used to drift the ionization electrons, and minimizing the stored energy per TPC. Segmenting the TPC also contains scintillation light, allowing for precise trigger localization and a more expansive light-readout system. Furthermore, the design opens the possibility of replacing or upgrading components. These augmentations could substantially improve the reliability and the sensitivity, particularly for low-energy signals, in comparison to traditional monolithic LArTPCs with projective-wire charge readouts.
APA, Harvard, Vancouver, ISO, and other styles
8

Xie, Siwei, Zhiliang Zhu, Xi Zhang, Qiangqiang Xie, Hongsen Yu, Yibin Zhang, Jianfeng Xu, and Qiyu Peng. "Optical Simulation and Experimental Assessment with Time–Walk Correction of TOF–PET Detectors with Multi-Ended Readouts." Sensors 21, no. 14 (July 8, 2021): 4681. http://dx.doi.org/10.3390/s21144681.

Full text
Abstract:
As a commonly used solution, the multi-ended readout can measure the depth-of-interaction (DOI) for positron emission tomography (PET) detectors. In the present study, the effects of the multi-ended readout design were investigated using the leading-edge discriminator (LED) triggers on the timing performance of time-of-flight (TOF) PET detectors. At the very first, the photon transmission model of the four detectors, namely, single-ended readout, dual-ended readout, side dual-ended readout, and triple-ended readout, was established in Tracepro. The optical simulation revealed that the light output of the multi-ended readout was higher. Meanwhile, the readout circuit could be triggered earlier. Especially, in the triple-ended readout, the light output at 0.5 ns was observed to be nearly twice that of the single-ended readout after the first scintillating photon was generated. Subsequently, a reference detector was applied to test the multi-ended readout detectors that were constructed from a 6 × 6 × 25 mm3 LYSO crystal. Each module is composed of a crystal coupled with multiple SiPMs. Accordingly, its timing performance was improved by approximately 10% after the compensation of fourth-order polynomial fitting. Finally, the compensated full-width-at-half-maximum (FWHM) coincidence timing resolutions (CTR) of the dual-ended readout, side dual-ended readout, and triple-ended readout were 216.9 ps, 231.0 ps, and 203.6 ps, respectively.
APA, Harvard, Vancouver, ISO, and other styles
9

GAO, ZHIYUAN, SUYING YAO, JIANGTAO XU, and CHAO XU. "DYNAMIC RANGE EXTENSION OF CMOS IMAGE SENSORS USING MULTI-INTEGRATION TECHNIQUE WITH COMPACT READOUT." Journal of Circuits, Systems and Computers 22, no. 06 (July 2013): 1350042. http://dx.doi.org/10.1142/s0218126613500424.

Full text
Abstract:
A multi-integration technology with compact readout method to extend CMOS image sensor's dynamic range is presented. Compared with the timing of rolling readout, compact readout extends the available pixel readout time by adjusting the time-domain offset between two adjacent rows and each integration time in one frame. Thus the column readout bus is working continuously rather than intermittently, which makes good use of the whole integration time and the available readout time can be extended. This dynamic range extension technology was implemented on a prototype chip with a 128 × 128 pixel array. The pixel readout time with compact readout method is almost as 3 times long as the one with rolling readout method while 39 dB dynamic range extension is achieved at 120 fps.
APA, Harvard, Vancouver, ISO, and other styles
10

Lauschke, Karin, Andreas Frederik Treschow, Mikkel Aabech Rasmussen, Nichlas Davidsen, Bjørn Holst, Jenny Emnéus, Camilla Taxvig, and Anne Marie Vinggaard. "Creating a human-induced pluripotent stem cell-based NKX2.5 reporter gene assay for developmental toxicity testing." Archives of Toxicology 95, no. 5 (March 4, 2021): 1659–70. http://dx.doi.org/10.1007/s00204-021-03018-y.

Full text
Abstract:
AbstractTo test large numbers of chemicals for developmental toxicity, rapid in vitro tests with standardized readouts for automated data acquisition are needed. However, the most widely used assay, the embryonic stem cell test, relies on the counting of beating embryoid bodies by visual inspection, which is laborious and time consuming. We previously developed the PluriBeat assay based on differentiation of human induced pluripotent stem cells (hiPSC) that we demonstrated to be predictive for known teratogens at relevant concentrations using the readout of beating cardiomyocytes. Here, we report the development of a novel assay, which we term the PluriLum assay, where we have introduced a luciferase reporter gene into the locus of NKX2.5 of our hiPSC line. This enabled us to measure luminescence intensities instead of counting beating cardiomyocytes, which is less labor intensive. We established two NKX2.5 reporter cell lines and validated their pluripotency and genetic stability. Moreover, we confirmed that the genetically engineered NKX2.5 reporter cell line differentiated into cardiomyocytes with the same efficiency as the original wild-type line. We then exposed the cells to valproic acid (25–300 μM) and thalidomide (0.1–36 µM) and compared the PluriBeat readout of the cardiomyocytes with the luminescence intensity of the PluriLum assay. The results showed that thalidomide decreased luminescence intensity significantly with a higher potency and efficacy compared to the beating readout. With this, we have developed a novel hiPSC-based assay with a standardized readout that may have the potential for higher throughput screening for developmental toxicity.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "And readout"

1

Göransson, Jenny. "Readout Strategies for Biomolecular Analyses." Doctoral thesis, Uppsala universitet, Institutionen för genetik och patologi, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9343.

Full text
Abstract:
This thesis describes three readout formats for molecular analyses. A common feature in all works is probing techniques that upon specific target recognition ideally results in equimolar amounts of DNA circles. These are then specifically amplified and detected using any of the techniques presented herein. The first paper presents a method that enables homogeneous digital detection and enumeration of biomolecules, represented as fluorescence-labelled DNA macromolecules. This method offers precise measurements to be performed with a wide linear dynamic range. As an application, two closely related bacterial species were selectively detected. The second paper further investigates and optimizes the properties of the technique presented in paper one. The third paper demonstrates a platform that enables simultaneous quantitative analysis of large numbers of biomolecules. The array format and decoding scheme together propose a digital strategy for decoding of biomolecules. The array and the decoding procedure were characterized and evaluated for gene copy-number measurements. The fourth paper examines a new strategy for non-optical measurements of biomolecules. Characteristics of this technique are investigated, and compared to its optical equivalent, fluorescence polarization.
APA, Harvard, Vancouver, ISO, and other styles
2

Göransson, Jenny. "Readout Strategies for Biomolecular Analyses /." Uppsala : Acta Universitatis Upsaliensis, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9343.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Patel, Trupti. "Nanomechanical resonators for SQUID readout." Thesis, University College London (University of London), 2018. http://discovery.ucl.ac.uk/10043534/.

Full text
Abstract:
Nano-electromechanical systems (NEMS) are an important new class of device, with a growing range of applications, from tests of quantum mechanics through to nanoscale metrology and a vast number of different sensors. Cryogenic operation is also possible, and at low temperatures, nanoscale resonators exhibit quantum behaviour. NEMS resonators require readout of ultra-small, atomic scale displacements. To achieve this at low temperatures we have developed an ultrasensitive nanoSQUID readout of a coupled current-carrying NEMS resonator. The NanoSQUIDs are fabricated by gallium focussed ion beam milling and are based on niobium nanobridge weak links (Dayem bridges). The nanoSQUIDs have low loop inductance and low junction capacitance resulting in high flux and energy sensitivity. This work focusses on the characterisation of the resonator and nanoSQUID after they have been incorporated onto one chip. This is done through nanoindentation to characterise resonators and electronic measurements of the SQUID using a low-temperature preamplifier. It is found that the model used based upon an Euler-Bernoilli beam is correct close the centre of the sample but does not fit data points well close to the contacts. It is found the resonators have Young’s modulus in the range of 3GPa-241GPa. Both beam and paddle-shaped resonators are investigated and the models are made based upon the two different shapes. That for the paddle is based upon the same as the beam but uses a rectangular function to describe the changing area moment of inertia along the length of the resonator. The SQUID devices are characterised and found to have a typical noise floor of 0.2μ 0/pHz. Problems which have arisen due to the orientation of the two magnetic fields and their effect on the SQUID performance are discussed. We consider the geometry and optimum coupling of rectangular and square Si3N4 resonators to matching similar shaped nanoSQUID loops. We also discuss simulations of the nanoSQUID response versus resonator position for both symmetric and asymmetric configurations. It is found that optimal coupling is achieved in the asymmetric case due to the cancelling of the change in flux in the symmetric case. The use of a normal conducting or superconducting resonator is compared. It is found that a superconducting resonator provides a much larger SQUID response when actuated towards​ the device but cannot be used in the regime due to limitations of the superconducting transition temperature of Al (the resonator) being lower than the non-hysteretic operable temperature of the SQUID. Preliminary measurements are conducted on the coupled devices. It is noted that the signal from the device in the conducting case may be read out at 2! due to the sinusoidal change in flux through the SQUID loop and position of the resonator. The possibility of measuring such a signal is first investigated using a spectrum analyser but it is found the SQUID is pushed to nonlinear regions of its transfer curve. This results in a component of the signal at 2! due to the nonlinearity of the SQUID response. Conditions under which the SQUID is still operating in small signal mode (to preserve linearity of the SQUID response) are considered and from this we conclude there is a need to use phase sensitive detection to achieve optimum sensitivity. This technique is used to conduct the final measurement of the motion of the resonator by the SQUID and a preliminary result is found.
APA, Harvard, Vancouver, ISO, and other styles
4

Klöfver, Per. "Redesign of readout driver using FPGA." Thesis, Linköping University, Department of Electrical Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-15157.

Full text
Abstract:

In the ATLAS experiment now being finished at CERN in Geneva, bunches ofprotons will collide at a rate of 40 million times per second. Over 40 TB of datawill be generated every second. In order to reduce the amount of data to a moremanageable level, a system of triggers is put in place. The trigger system mustquickly evaluate if the data from a collision indicates that an interesting physicalprocess took place, in which case the data are to be stored for further analysis.    ATLAS uses a trigger system with three steps. The first step, the First LevelTrigger, is responsible of reducing the rate from 40MHz to 75KHz, and is donecompletely in hardware. It receives a new event every 25 ns, and must decidewithin 2.5 μs whether the event should be passed on to the next trigger level.    In this document is the redesign of two subsystems of the First Level Triggerdescribed. When prototypes were made 5-10 years ago, both subsystems used 7PLDs. Today, the same logic could be fitted in one FPGA, and because of theflexibility gained by having all logic in a single FPGA, both subsystems could berealized with the same PCB design.

APA, Harvard, Vancouver, ISO, and other styles
5

Gerberding, Oliver [Verfasser]. "Phase readout for satellite interferometry / Oliver Gerberding." Hannover : Technische Informationsbibliothek und Universitätsbibliothek Hannover (TIB), 2014. http://d-nb.info/1053543093/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gebbia, Giuseppe. "A flexible readout board for HEP experiments." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/16384/.

Full text
Abstract:
This thesis will present my contributions to the development of the PiLUP board along with a general overview of its features and capabilities. The PiLUP board is a general-purpose FPGA-based readout board for data acquisition systems under development by the University of Bologna and the Instituto Nazionale Fisica Nucleare (INFN) and intended for high energy physics experiments, where the sheer amount of data generated by detectors often requires custom hardware solutions. This board was initially proposed for the next upgrade of the ATLAS Pixel detector. In this context its purpose would be to interface the Front-End readout chip RD53A with the FELIX card and provide advanced testing features such as an emulator for the RD53A that will help the development of the other parts of the data acquisition chain. Nonetheless, since the early stages of development, the hardware has been designed to offer great flexibility so that the same hardware platform could be directly used in other applications. To this purpose an important feature of the board is the great extendibility offered by the presence of different interfaces, such as and 3 FMC connectors (two low density and one high density), a PCI Express x8 interface, gigabit ethernet and an integrated SFP connector. The computing power of the PiLUP is provided by of two FPGAs, a Zynq-7 SoC and a Kintex-7 produced by Xilinx, intended to be used in master-slave configuration. In this case the Zynq, with its dual-core ARM processor and the possibility to run an embedded linux distribution, would be used as main interface with the other functionalities in the board. The main objective of this thesis is the development of such software and firmware control infrastructure, starting from the firmware solutions for the inter-FPGA communication to the low-level software to control the system.
APA, Harvard, Vancouver, ISO, and other styles
7

Burrell, Alice Heather. "High fidelity readout of trapped ion qubits." Thesis, University of Oxford, 2010. http://ora.ox.ac.uk/objects/uuid:ff74c170-518a-40a5-be85-191ec5bb32d7.

Full text
Abstract:
This thesis describes experimental demonstrations of high-fidelity readout of trapped ion quantum bits ("qubits") for quantum information processing. We present direct single-shot measurement of an "optical" qubit stored in a single calcium-40 ion by the process of resonance fluorescence with a fidelity of 99.991(1)% (surpassing the level necessary for fault-tolerant quantum computation). A time-resolved maximum likelihood method is used to discriminate efficiently between the two qubit states based on photon-counting information, even in the presence of qubit decay from one state to the other. It also screens out errors due to cosmic ray events in the detector, a phenomenon investigated in this work. An adaptive method allows the 99.99% level to be reached in 145us average detection time. The readout fidelity is asymmetric: 99.9998% is possible for the "bright" qubit state, while retaining 99.98% for the "dark" state. This asymmetry could be exploited in quantum error correction (by encoding the "no-error" syndrome of the ancilla qubits in the "bright" state), as could the likelihood values computed (which quantify confidence in the measurement outcome). We then extend the work to parallel readout of a four-ion string using a CCD camera and achieve the same 99.99% net fidelity, limited by qubit decay in the 400us exposure time. The behaviour of the camera is characterised by fitting experimental data with a model. The additional readout error due to cross-talk between ion images on the CCD is measured in an experiment designed to remove the effect of qubit decay; a spatial maximum likelihood technique is used to reduce this error to only 0.2(1)x10^{-4} per qubit, despite the presence of ~4% optical cross-talk between neighbouring qubits. Studies of the cross-talk indicate that the readout method would scale with negligible loss of fidelity to parallel readout of ~10,000 qubits with a readout time of ~3us per qubit. Monte-Carlo simulations of the readout process are presented for comparison with experimental data; these are also used to explore the parameter space associated with fluorescence detection and to optimise experimental and analysis parameters. Applications of the analysis methods to readout of other atomic and solid-state qubits are discussed.
APA, Harvard, Vancouver, ISO, and other styles
8

Salzer, Sebastian [Verfasser]. "Readout Methods for Magnetoelectric Sensors / Sebastian Salzer." Kiel : Universitätsbibliothek Kiel, 2018. http://d-nb.info/1163603716/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Duell, Anthony Richard. "A versatile readout system for particle detectors." Thesis, University of Bristol, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Savran, Cagri Abdullah 1976. "A micromechanical biosensor with inherently differential readout." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/17944.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.
Includes bibliographical references (leaves 99-105).
The ability to detect biomolecules in real-time and without the use of labels has significant benefits for systems biology in terms of cost, time and throughput. Cantilever-based micromechanical sensors detect biomolecular adsorption by means of surface-stress-induced cantilever bending. This technique enables sensitive, scalable and label-free detection of biomolecules in real-time. However, micromachined cantilevers are extremely sensitive to nonspecific chemical effects and temperature changes. This thesis explores a micromechanical sensor that suppresses disturbances by generating an inherently differential signal with respect to a reference surface. The thesis covers the design, fabrication, characterization of the sensor, and its application to protein detection using aptamers; receptor molecules produced in vitro. The sensor is composed of two adjacent cantilevers that form a sensor-reference pair, whereby only the sensing surface is activated with receptor molecules that are specific to the ligand to be detected. The relative, or differential bending between the two cantilevers is directly measured using interferometry. Through direct differential detection, disturbances affecting both cantilevers are suppressed at the measurement level. This eliminates the need for separate detection of each cantilever's motion and off-line processing of the individual signals. At high frequencies, the resolution of the sensor is only limited by its sub-angstrom-level thermomechanical noise. At lower frequencies (frequencies of interest), the resolution is limited by 1/f-type noise which can be reduced by as much as an order of magnitude by direct differential detection, enabling clear observation of receptor-ligand binding
(cont.) reactions in real-time.
by Cagri Abdullah Savran.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "And readout"

1

Lernout, J. W. A. Greyscale image sensors with digital readout. Manchester: UMIST, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yazıcıoğlu, Refet Fırat, Chris Van Hoof, and Robert Puers. Biopotential Readout Circuits for Portable Acquisition Systems. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-1-4020-9093-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kevin, Stein. BattleTech: Technical readout 3026 (vehicles and personal equipment). Chicago, IL: FASA Corp., 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nawito, Moustafa. CMOS Readout Chips for Implantable Multimodal Smart Biosensors. Wiesbaden: Springer Fachmedien Wiesbaden, 2018. http://dx.doi.org/10.1007/978-3-658-20347-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fossum, Eric R. Hybridization of detector array and integrated circuit for readout. [Washington, DC: National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hunter, David Mackenzie. Digital radiography by laser scanned readout of amorphous selenium. Ottawa: National Library of Canada, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Joshi, Sanjay Kumar. Development of a disposable direct-readout device for sensitivity testing and microbiological drug assay. Manchester: University of Manchester, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Webster, Kenneth Andrew. Investigation of the use of optical modulators for analogue data readout from particle physics detectors. Birmingham: University of Birmingham, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhao, Wei. A flat panel detector for digital radiology using self-scanned readout of X-ray photoconductor: Fundamental study of feasibility. Ottawa: National Library of Canada, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rashid, Hani. Optigraph 3: Berlin readouts. [New York]: Columbia University Graduate School of Architecture, Planning and Preservation, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "And readout"

1

Weik, Martin H. "readout." In Computer Science and Communications Dictionary, 1420. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_15555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Weik, Martin H. "nondestructive readout." In Computer Science and Communications Dictionary, 1105. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_12398.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yazicioglu, R. Firat. "Readout Circuits." In Bio-Medical CMOS ICs, 125–55. Boston, MA: Springer US, 2010. http://dx.doi.org/10.1007/978-1-4419-6597-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rao, P. Krishna, Susan J. Holmes, Ralph K. Anderson, Jay S. Winston, and Paul E. Lehr. "Satellite Direct Readout." In Weather Satellites: Systems, Data, and Environmental Applications, 143–45. Boston, MA: American Meteorological Society, 1990. http://dx.doi.org/10.1007/978-1-944970-16-1_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vajente, Gabriele. "Readout, Sensing, and Control." In Advanced Interferometers and the Search for Gravitational Waves, 153–92. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-03792-9_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Souri, Kamran, and Kofi A. A. Makinwa. "Energy-Efficient BJT Readout." In Analog Circuits and Signal Processing, 37–58. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-62307-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tokuda, Takashi, and Jun Ohta. "DNA Optical Readout Methods." In Handbook of Biochips, 1–12. New York, NY: Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4614-6623-9_10-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lipton, Michael L. "Readout Modules: Fast Imaging." In Totally Accessible MRI, 174–86. New York, NY: Springer New York, 2008. http://dx.doi.org/10.1007/978-0-387-48896-7_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xu, Jiawei, Refet Firat Yazicioglu, Chris Van Hoof, and Kofi Makinwa. "An Active Electrode Readout Circuit." In Analog Circuits and Signal Processing, 23–47. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74863-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yazıcıoğlu, Refet Fırat, Chris Van Hoof, and Robert Puers. "Biopotential Readout Front-End ASICs." In Analog Circuits and Signal Processing, 39–78. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-1-4020-9093-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "And readout"

1

Wenzel, Hans. "Simulation of total absorption dual readout calorimetry." In Simulation of total absorption dual readout calorimetry. US DOE, 2010. http://dx.doi.org/10.2172/1767040.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vasey, Francois. "Fast readout links." In The 20th Anniversary International Workshop on Vertex Detectors. Trieste, Italy: Sissa Medialab, 2012. http://dx.doi.org/10.22323/1.137.0042.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Leach, Robert W., and John Denune. "Noise and readout performance of a multiple-readout CCD controller." In 1994 Symposium on Astronomical Telescopes & Instrumentation for the 21st Century, edited by David L. Crawford and Eric R. Craine. SPIE, 1994. http://dx.doi.org/10.1117/12.176781.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Qiu, Changqing, Xinde Wang, and Ken K. Chin. "Correlated readout: a new readout method of focal plane array." In Aerospace/Defense Sensing and Controls, edited by Bedabrata Pain and Terrence S. Lomheim. SPIE, 1998. http://dx.doi.org/10.1117/12.321762.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Murray, P., and M. Lovell. "A 16-channel Readout Chip - A new sparse data readout architecture." In Eighteenth European Solid-State Circuits Conference (ESSCIRC '92). IEEE, 1992. http://dx.doi.org/10.1109/esscirc.1992.5468222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Diehl, Inge, Karsten Hansen, Katja Kruger, Christian Reckleben, Felix Sefkow, Yuan Yao, Ladislav Andricek, Jelena Ninkovic, Stefan Petrovics, and Rainer Richter. "Readout of digital SiPMs." In 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2018. http://dx.doi.org/10.1109/nssmic.2018.8824395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ball, K., Graham W. Smith, and D. J. Burt. "High-speed readout CCDs." In 19th Intl Congress on High-Speed Photography and Photonics. SPIE, 1991. http://dx.doi.org/10.1117/12.23945.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Prokop, Mark, Thomas W. McCurnin, and Gary L. Stradling. "Millisecond-readout CCD camera." In 20th International Congress on High Speed Photography and Photonics, edited by John M. Dewey and Roberto G. Racca. SPIE, 1993. http://dx.doi.org/10.1117/12.145811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ludwig, David E., and Michael Skow. "Compensated digital readout family." In San Diego, '91, San Diego, CA, edited by T. S. J. Jayadev. SPIE, 1991. http://dx.doi.org/10.1117/12.49321.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prokop, Mark, Thomas W. McCurnin, and Gary L. Stradling. "Millisecond readout CCD camera." In San Diego '92, edited by Donald R. Snyder. SPIE, 1993. http://dx.doi.org/10.1117/12.139151.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "And readout"

1

Caiulo, Davide, L. Baldini, F. Cei, F. D'Errico, S. Di Falco, S. Donati, S. Faetti, et al. Mu2e Calorimeter Readout System. Office of Scientific and Technical Information (OSTI), May 2018. http://dx.doi.org/10.2172/1579236.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rossi, D., M. Widgoff, and E. Alyea. Streamer tube readout electronics. Office of Scientific and Technical Information (OSTI), March 1989. http://dx.doi.org/10.2172/7018875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Psaltis, Demetri. Parallel Readout of Optical Disks. Fort Belvoir, VA: Defense Technical Information Center, August 1992. http://dx.doi.org/10.21236/ada256625.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chiang, I.-Hung, Stepen Jao, and F. Bartosz. Sens-Tech XDAS Readout System. Office of Scientific and Technical Information (OSTI), October 2014. http://dx.doi.org/10.2172/1775554.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Asztalos, Stephen J. Semiconductor detectors with proximity signal readout. Office of Scientific and Technical Information (OSTI), April 2012. http://dx.doi.org/10.2172/1120945.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Feiling. High Density Optical Readout Nonvolatile RAMs. Fort Belvoir, VA: Defense Technical Information Center, February 1995. http://dx.doi.org/10.21236/ada300416.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Croce, Mark Philip, Katrina Elizabeth Koehler, Michael W. Rabin, D. A. Bennett, J. A. B. Mates, J. D. Gard, D. Becker, D. R. Schmidt, and J. N. Ullom. Preliminary Assessment of Microwave Readout Multiplexing Factor. Office of Scientific and Technical Information (OSTI), January 2017. http://dx.doi.org/10.2172/1340978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sete, Eyob A., Andrei Galiautdinov, Eric Mlinar, John M. Martinis, and Alexander N. Korokov. Catch-Disperse-Release Readout for Superconducting Qubits. Fort Belvoir, VA: Defense Technical Information Center, March 2013. http://dx.doi.org/10.21236/ada580651.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wyntjes, Geert, Alex Newburgh, and Thomas Hudson. Precision Photonic Readout for Focal Plane Signals. Fort Belvoir, VA: Defense Technical Information Center, August 1999. http://dx.doi.org/10.21236/ada387843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wagner, Thomas W. Satellite Direct Readout: Opportunities for Science Education. Fort Belvoir, VA: Defense Technical Information Center, February 1994. http://dx.doi.org/10.21236/ada276257.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'And readout' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography