Academic literature on the topic 'Aluminum scrap'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminum scrap.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Aluminum scrap"
Yue, Qiang, Zaidong Fan, Chao Zhang, Fen Liu, Heming Wang, and Fengrui Jia. "Development and Evolution of Aluminum Industry in China Based on Aluminum Flow Analysis." Journal of Systems Science and Information 4, no. 3 (June 25, 2016): 212–22. http://dx.doi.org/10.21078/jssi-2016-212-11.
Full textCui, Ji Rang, Wei Guo, Hans Jørgen Roven, Qu Dong Wang, Yong Jun Chen, and Tao Peng. "Recycling of Aluminum Scrap by Severe Plastic Deformation." Materials Science Forum 667-669 (December 2010): 1177–82. http://dx.doi.org/10.4028/www.scientific.net/msf.667-669.1177.
Full textGarabito, J. A., H. Granados, V. H. López, A. R. Kennedy, and J. E. Bedolla. "Vacuum Foaming of Aluminum Scrap." MRS Proceedings 1481 (2012): 83–88. http://dx.doi.org/10.1557/opl.2012.1635.
Full textNajib Khan, Abdul Shafiq Khan A., Nur Ezzah Faezah Othman, Hadi Purwanto, Hafasihah Abdul Halim, and Ahmad Firdaus Shamsul Baharin. "Synthetic of Pure Alumina from Aluminum Scrap." Advanced Materials Research 1115 (July 2015): 170–73. http://dx.doi.org/10.4028/www.scientific.net/amr.1115.170.
Full textDeGaspari, John. "Making the Most of Aluminum Scrap." Mechanical Engineering 121, no. 11 (November 1, 1999): 71–73. http://dx.doi.org/10.1115/1.1999-nov-3.
Full textYue, Qiang, and Zhong Wu Lu. "Aluminum Flow Analysis for the Life Cycle of Aluminum Products." Advanced Materials Research 113-116 (June 2010): 2287–91. http://dx.doi.org/10.4028/www.scientific.net/amr.113-116.2287.
Full textUsmonov, J. M., Sh M. Shakirov, M. M. Ubaydullayev, and S. O. Parmonov. "Aluminum-based composition materials for processing aluminum scrap." ACADEMICIA: An International Multidisciplinary Research Journal 11, no. 8 (2021): 590–95. http://dx.doi.org/10.5958/2249-7137.2021.01857.7.
Full textAhmad, Farhan, Akhyar, and Ali Masri. "Experiment on Hardness and Impact Strength of Recycled Aluminum Alloys by Metal Casting Process." Materials Science Forum 961 (July 2019): 65–72. http://dx.doi.org/10.4028/www.scientific.net/msf.961.65.
Full textVerkhovlyuk, Anatoly, Vitaliy Dovbenko, and Ivan Chervonyi. "Analysis of aluminum scrap processing technology." ScienceRise 1, no. 12 (December 28, 2019): 47–54. http://dx.doi.org/10.15587/2313-8416.2019.189686.
Full textLee, Ching-Hwa, Tei-Chih Cheau, and Sang-Teh Chen. "Separating aluminum from shredded automotive scrap." JOM 46, no. 5 (May 1994): 40–42. http://dx.doi.org/10.1007/bf03220695.
Full textDissertations / Theses on the topic "Aluminum scrap"
Miller, Shannon(Shannon E. ). "Scrap aluminum as fuel." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/123278.
Full textCataloged from PDF version of thesis.
Includes bibliographical references (page 32).
The new development of a low cost, low risk aluminum fuel production method has extended the viable use cases of aluminum as a fuel. Scrap aluminum has the potential to provide fuel in disaster relief zones when infrastructure is ruined and scrap metal is abundant. Additionally, converting scrap aluminum to fuel can provide an alternate option to traditional recycling methods. The following paper presents various methods used to process and treat scrap aluminum and the resulting efficacy of these methods. Four different fuel production methods are presented. Parameters such as method of reforming scrap aluminum, percent mass eutectic in fuel, eutectic coating time, and pretreatment of aluminum cans are varied. The various methods achieved a wide range of efficiencies with the best being 57%.
by Shannon Miller.
S.B.
S.B. Massachusetts Institute of Technology, Department of Mechanical Engineering
Roy, Raja R. "Physicochemical measurements in Aluminum-Salt systems relevant to recycling of Aluminum scrap /." The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487859879941207.
Full textKelly, Sean Michael. "Recycling of Passenger Vehicles: A framework for upcycling and required enabling technologies." Digital WPI, 2018. https://digitalcommons.wpi.edu/etd-dissertations/543.
Full textFarner, Snorre. "Remelting of Aluminium by Continuous Submersion of Rolled Scrap." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2000. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-230.
Full textDavis, Jennifer. "Closing the cycles of iron, steel and aluminium in the UK on recycling rates, scrap quality and collection of dispersed scrap." Thesis, University of Surrey, 2004. http://epubs.surrey.ac.uk/843368/.
Full textMlčoch, Petr. "Drapákový manipulátor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231169.
Full textRODRIGUES, LEVI S. "Eletrodissolucao de aluminio e uranio metalicos em meio aquoso." reponame:Repositório Institucional do IPEN, 2001. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10898.
Full textMade available in DSpace on 2014-10-09T14:09:38Z (GMT). No. of bitstreams: 1 07291.pdf: 4979703 bytes, checksum: e454a20fc002a772e73a3aa1f5d86a92 (MD5)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
FAPESP:97/00725-0
Боянівський, Владислав Петрович. "Підвищення ефективності печей для переплавки алюмінієвого брухту." Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/24376.
Full textMaster's dissertation on "Improving the efficiency of furnaces for aluminum scrap remelting": 104 p., 35 f., 12 tables, 4 applications, 15 sources. The object of the study is an oven for aluminum scrap remelting. The purpose of the work is to increase energy efficiency and improve the design of furnaces for aluminum scrap remelting. Analyzed the main ways of improving energy efficiency. Presented the results of calculations of the energy efficiency of a 6-ton capacity kiln with a capacity of 600 kW for the remelting of aluminum scrap. It is shown that due to reduction of the opening time of the firebox, the cost of the supplied heat in the furnace decreased by 45% and due to the change of the thermal insulation layers - by 21%. Selected gas-fired devices - burners type GPP-5 and the scheme of their placement in the side of the front wall of the furnace. The calculations of the energy and economic efficiency of the furnace conversion from the electric heating to the gas have been performed, while for the gas heating the costs of the supplied heat are reduced by 9 - 10% in comparison with the electric one. Calculations have shown that the use of gas heating compared to electric is economically more efficient, since the cost of natural gas in the melt cycle for a 600 kV upgraded furnace decreases by about 10%. Developed the furnace design with an inclined vault for which the average melting time decreases by 11% compared to the traditional one, and the efficiency increases by 7%. For utilization of flue gases heat was chosen one-sided-needle metal recuperator for heating of blown air with the area of the heating surface 12 m2. As a result of the installation of the recuperator, the temperature of the flue gases is reduced from 800 °C to 390 °C, while the ambient air temperature rises from 20 ° C to 350 C. The amount of fuel savings is 16.9 %. Based on the Solid Works software, constructed geometric models of the multilayer walls of the furnace and obtained the results of the distribution of temperature fields along the thickness of the enclosing structures. The presented results are comparable to the experimental data obtained on real furnaces. Made provision for safe and comfortable work in the premises of a research laboratory and fire and safety measures in emergencies. A startup project based on the Business Model Canvas template has been developed.
Магистерская диссертация на тему «Повышение эффективности печей для переплавки алюминиевого лома» 104 с., 35 рис., 12 табл., 4 приложения, 15 источников. Объект исследования - печь для переплавки алюминиевого лома. Цель работы - повышение энергетической эффективности и совершенствование конструкции печей для переплавки алюминиевого лома. Проанализированы основные способы повышения энергетической эффективности. Приведены результаты расчетов энергетической эффективности печи вместимостью 6 т, мощностью 600 кВт, для переплавки алюминиевого лома. Показано, что за счет уменьшения срока открытия форкамер снизились расходы подведенной теплоты в печи на 45%, а за счет изменения теплоизоляционных слоев - на 21%. Выбраны газосжигающие устройства - горелки типа ГПП-5 и приведена схема их размещения в боковой передней стенке печи. Выполнены расчеты энергетической и экономической эффективности перевода печи с электрического нагрева на газовый, при этом для газового нагрева расходы подведенной теплоты уменьшаются на 9 - 10% по сравнению с электрическим. Расчетами установлено, что использование газового нагрева по сравнению с электрическим экономически более эффективно, поскольку затраты на природный газ в цикле плавки для модернизированной печи мощностью 600 кВт уменьшаются примерно на 10%. Разработана конструкция печи с наклонным сводом, для которой по сравнению с традиционным уменьшается срок плавки в среднем на 11%, а КПД повышается на 7%. Для утилизации теплоты дымовых газов выбран односторонне-игольчатый металлический рекуператор для подогрева дутьевого воздуха с площадью поверхности нагрева 12 м2. В результате установки рекуператора температура дымовых газов снижается от 800 °С до 390 °С, при этом температура дутьевого воздуха повышается от 20 °С до 350 °С. Величина экономии топлива составляет 16,9%. На базе программного обеспечения Solid Works построены геометрические модели многослойных стенок печи и получены результаты распределения температурных полей по толщине ограждающих конструкций. Приведены результаты сопоставимы с экспериментальными данными полученными на реальных печах. Предусмотрены меры по безопасной и комфортной работе в помещении научно-исследовательской лаборатории. Разработан стартап-проект по шаблону Business Model Canvas.
Books on the topic "Aluminum scrap"
Aluminum recycling. Boca Raton, FL: CRC/Taylor & Francis, 2007.
Find full textBrown, R. D. Separation of cast and wrought aluminum alloys by thermomechanical processing. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1985.
Find full textInternational Primary Aluminium Institute. Statistics Committee Review. Aluminium scrap. 2nd ed. London: The Institute, 1990.
Find full textGuidelines for Aluminum Scrap Quality. Aluminum Assn, 1993.
Find full textSchlesinger, Mark E. Aluminum Recycling. CRC, 2006.
Find full textSchlesinger, Mark E. Aluminum Recycling, Second Edition. Taylor & Francis Group, 2017.
Find full textAluminum Recycling, Second Edition. Taylor & Francis Group, 2013.
Find full textAssociation, Aluminum, ed. Guidelines for aluminum scrap receiving and inspection based on safety and health considerations. Washington, D.C: Aluminum Association, 1992.
Find full textThe World Market for Aluminum Waste and Scrap: A 2004 Global Trade Perspective. Icon Group International, Inc., 2005.
Find full textParker, Philip M. The 2007 Import and Export Market for Aluminum Waste and Scrap in India. ICON Group International, Inc., 2006.
Find full textBook chapters on the topic "Aluminum scrap"
Pantke, K., V. Güley, D. Biermann, and A. E. Tekkaya. "Aluminum Scrap Recycling Without Melting." In Future Trends in Production Engineering, 373–77. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24491-9_37.
Full textGesing, Adam, Christopher Stewart, Richard Wolanski, Ron Dalton, and Larry Berry. "Scrap Preparation for Aluminum Alloy Sorting." In Recycling of Metals and Engineercd Materials, 1233–49. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118788073.ch109.
Full textXiao, Y., M. Reuter, P. Vonk, J. Vonken, H. Orbon, Th Probst, and U. Boin. "Experimental Study on Aluminum Scrap Recycling." In Recycling of Metals and Engineercd Materials, 1075–87. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118788073.ch93.
Full textHenderson, Richard S., David V. Neff, and Chris T. Vild. "Recent Developments in Aluminum Scrap Melting Update." In Aluminium Cast House Technology, 77–86. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118806364.ch8.
Full textBruggink, P. R. "Aluminum Scrap Supply and Environmental Impact Model." In Recycling of Metals and Engineercd Materials, 809–22. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118788073.ch71.
Full textOberhausen, Gregory J., Anselm A. A. Christopher, and Daniel R. Cooper. "Reducing Aluminum Extrusion Transverse Weld Process Scrap." In Forming the Future, 1003–19. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_84.
Full textKevorkijan, Varuzan, Peter Cvahte, Branko Hmelak, Sara Hmelak, Vukasin Dragojevic, Marina Jelen, Maijana Lazeta, and Uros Kovacec. "Scrap-Intensive Wrought Aluminum Alloys of Standard Quality." In Light Metals 2015, 237–42. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093435.ch41.
Full textPeterson, Warren S. "Hazards in Adding Scrap Copper to Molten Aluminum." In Essential Readings in Light Metals, 1097–101. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118647783.ch139.
Full textKevorkijan, Varužan, Peter Cvahte, Branko Hmelak, Sara Hmelak, Vukašin Dragojević, Marina Jelen, Marjana Lažeta, and Uroš Kovačec. "Scrap-Intensive Wrought Aluminum Alloys of Standard Quality." In Light Metals 2015, 237–42. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48248-4_41.
Full textPeterson, Warren S. "Hazards in Adding Scrap Copper to Molten Aluminum." In Essential Readings in Light Metals, 1097–99. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48228-6_139.
Full textConference papers on the topic "Aluminum scrap"
Gesing, Adam J., and Aron Rosenfeld. "Composition Based Sorting of Aluminum Scrap from Aluminum Intensive Vehicles." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/960163.
Full textBuckley, Steven G., Dahu Qi, Edward Guevara, and Christopher Stipe. "Sorting of Aluminum and Scrap Metal using Laser-Induced Breakdown Spectroscopy." In Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/aio.2013.am2b.3.
Full textBouzouni, Marianthi, and Spyros Papaefthymiou. "How to Design the Utilization of Larger Scrap Share in Aluminum Production." In RawMat 2021. Basel Switzerland: MDPI, 2021. http://dx.doi.org/10.3390/materproc2021005043.
Full textDe, Anindya Kanti, Achintya Mukhopadhyay, Swarnendu Sen, and Ishwar K. Puri. "A Numerical Simulation of Oxide Formation During the Melting of Aluminum in Aluminum Furnace." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-41286.
Full textVictor Christy, John, Abdel-Hamid I. Mourad, and Jaber Abu Qudeiri. "Tribological Analysis of Squeeze Stir Cast Recycled Aluminum MMC’s." In ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-62819.
Full textChristy, John Victor, Abdel-Hamid I. Mourad, and Ramanathan Arunachalam. "Sustainable Manufacturing and Optimization of Squeeze Stir Cast Rods Using Recycled Aluminum and Alumina Reinforcements." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21788.
Full textNarayana Swamy, Ashvin Kumar, and Evgeny Shafirovich. "Water Splitting by Aluminum Powder Obtained From Foil." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88150.
Full textDe, Anindya Kanti, Achintya Mukhopadhyay, Swarnendu Sen, and Ishwar K. Puri. "Numerical Modeling of the Oxidation of Aluminum Alloy." In ASME 2003 Heat Transfer Summer Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/ht2003-47519.
Full textChristy, John Victor, Abdel-Hamid I. Mourad, and Ramanathan Arunachalam. "Mechanical and Tribological Evaluation of Aluminum Metal Matrix Composite Pipes Fabricated by Gravity and Squeeze Stir Casting." In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93857.
Full textGupita, Linggar Tungga, Cornelius Satria Yudha, Anisa Raditya Nurohmah, Adrian Nur, Arif Jumari, and Agus Purwanto. "Recovery of lithium nickel cobalt aluminum oxide cathode material from battery scrap waste via sol-gel method." In INTERNATIONAL CONFERENCE ON SCIENCE AND APPLIED SCIENCE (ICSAS) 2021. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0072903.
Full textReports on the topic "Aluminum scrap"
Selby, C. L. Air-Melt Recovery of Lithium-Aluminum Scrap. Office of Scientific and Technical Information (OSTI), March 2003. http://dx.doi.org/10.2172/810369.
Full textCompere, A. L., W. L. Griffith, H. W. Hayden, and D. F. Wilson. Decontamination and reuse of ORGDP aluminum scrap. Office of Scientific and Technical Information (OSTI), December 1996. http://dx.doi.org/10.2172/656526.
Full textWilliam Van Geertruyden. Cost-Effective Consolidation of Fine Aluminum Scrap for Increased Remelting Effieciency. Office of Scientific and Technical Information (OSTI), September 2005. http://dx.doi.org/10.2172/850286.
Full textRobert De Saro. The Development of an Innovative Vertical Floatation Melter and Scrap Dryer for Use in the Aluminum Processing Industry. Office of Scientific and Technical Information (OSTI), August 2004. http://dx.doi.org/10.2172/828752.
Full text