Journal articles: 'Aluminum-oxynitride'

1

Dehuang, Wang, and Guo Liang. "An aluminum oxynitride film." Thin Solid Films 198, no. 1-2 (March 1991): 207–10. http://dx.doi.org/10.1016/0040-6090(91)90339-y.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Corbin, Normand D. "Aluminum oxynitride spinel: A review." Journal of the European Ceramic Society 5, no. 3 (January 1989): 143–54. http://dx.doi.org/10.1016/0955-2219(89)90030-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Du, Xinhua, Shiyue Yao, Xihai Jin, Yumei Long, Bo Liang, and Weifeng Li. "Photocatalytic properties of aluminum oxynitride (AlON)." Materials Letters 161 (December 2015): 72–74. http://dx.doi.org/10.1016/j.matlet.2015.08.069.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

DAI, Wenbin, Akira YAMAGUCHI, Wei LIN, Junji OMMYOJI, Jingkun YU, and Zongshu ZOU. "Oxidation Behavior of Magnesium Aluminum Oxynitride." Journal of the Ceramic Society of Japan 115, no. 1339 (2007): 195–200. http://dx.doi.org/10.2109/jcersj.115.195.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hartnett, T. M., S. D. Bernstein, E. A. Maguire, and R. W. Tustison. "Optical properties of ALON (aluminum oxynitride)." Infrared Physics & Technology 39, no. 4 (June 1998): 203–11. http://dx.doi.org/10.1016/s1350-4495(98)00007-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Messier, Donald R., Robert P. Gleisner, and Ronald E. Rich. "Yttrium-Silicon-Aluminum Oxynitride Glass Fibers." Journal of the American Ceramic Society 72, no. 11 (November 1989): 2183–86. http://dx.doi.org/10.1111/j.1151-2916.1989.tb06055.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Dravid, V. P., J. A. Sutliff, A. D. Weslwood, M. R. Nolts, and C. E. Lyman. "Centrosymmetric and nonsymmorphic aluminum oxynitride spinel." Proceedings, annual meeting, Electron Microscopy Society of America 47 (August 6, 1989): 512–13. http://dx.doi.org/10.1017/s0424820100154536.

Full text

Abstract:

There is considerable controversy concerning the point and space group of crystals based on the spinel structure. The debated question is whether the space group of spinel crystals is or . has noncentrosymmetric point group and is symmorphic; has centrosymmetric point group and is nonsymmorphic. One characteristic of the space group that distinguishes it from is that reflections hkl such that h+k, k+l, h+l ≠ 4n, for example {200}, are kinematically forbidden.MgAl2O4 spinel was studied by Steeds and Evans whose observations of {200} reflections in {001} ZAPs lead them to conclude that the space group of this crystal was . de Coomen and Carter also investigated MgAl2O4 spinel and came to the same conclusion. Although these authors do emphasize the importance of a HOLZ contribution to double diffraction, they do not show the effect of changes in accelerating voltage on the HOLZ segment responsible for double diffraction. To clearly show that {200} reflections appear only as a result of double diffraction via HOLZ, it is essential to observe both the {200} reflections and the HOLZ segment as a function of accelerating voltage.

APA, Harvard, Vancouver, ISO, and other styles

8

Nakao, Wataru, Hiroyuki Fukuyama, and Kazuhiro Nagata. "Thermodynamic Stability of γ-Aluminum Oxynitride." Journal of The Electrochemical Society 150, no. 2 (2003): J1. http://dx.doi.org/10.1149/1.1537757.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Paul W., Jin-Cherng Hsu, Yung-Hsin Lin, and Huang-Lu Chen. "Nitrogen bonding in aluminum oxynitride films." Applied Surface Science 256, no. 13 (April 2010): 4211–14. http://dx.doi.org/10.1016/j.apsusc.2010.02.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wen, Jin Song, Tie Cheng Lu, Jian Qi Qi, Ji Cheng Zhou, Wei Pang, Hai Ping Wang, Jun Feng He, Zhi Jun Liao, and Deng Xue Wu. "Preparation of Aluminum Oxynitride Powder by Solid State Reaction Method." Key Engineering Materials 368-372 (February 2008): 435–37. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.435.

Full text

Abstract:

Single-phase aluminum oxynitride powders were obtained by varying the holding temperature (T) and the weight percentage of α-Al2O3 in Al2O3 (X) with nano-sized Al2O3 and AlN powders as raw materials. Influences of T and X on the phase composition of obtained powders were studied. The results showed that the content of aluminum oxynitride increased with increasing T or X. When X was 50% and T was 1750°C, obtained powders had better properties than those of others.

APA, Harvard, Vancouver, ISO, and other styles

11

Hirai, Shinji, Hideaki Murakami, Hiroshi G. Katayama, Yoichiro Uemura, and Mamoru Mitomo. "Formation of Aluminum Oxynitride Spinel from Alumina and Aluminum Nitride." Journal of the Japan Institute of Metals 58, no. 6 (1994): 648–53. http://dx.doi.org/10.2320/jinstmet1952.58.6_648.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Xue, Jun Ming, Qian Liu, Tong Ping Xiu, Li Li Ma, Ming Fang, and Lin Hua Gui. "Hot-Pressed Translucent Aluminum Oxynitride (AlON) Ceramics." Key Engineering Materials 368-372 (February 2008): 450–52. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.450.

Full text

Abstract:

AlON with a composition of Al23O27N5 was prepared by hot pressing at temperatures lower than 1900 °C. The microstructures and final properties, including both mechanical properties and optical properties, of the sintered specimens were studied. The results showed that sintering temperature had a great influence on the densification of specimens and could lead to very different properties, especially the optical transmittance and the maximum infrared transmission.

APA, Harvard, Vancouver, ISO, and other styles

13

Borovinskaya, I. P., T. I. Ignat’eva, V. N. Semenova, and E. A. Chemagina. "Aluminum oxynitride by SHS in chemical furnace." International Journal of Self-Propagating High-Temperature Synthesis 24, no. 3 (July 2015): 142–47. http://dx.doi.org/10.3103/s1061386215030036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

TAKAHASHI, Hiroyuki, Takayasu SATO, Shigeru ITO, and Kazuo AKASHI. "Reaction Plasma Sintering of Aluminum Oxynitride Ceramics." Journal of the Ceramic Society of Japan 104, no. 1211 (1996): 614–19. http://dx.doi.org/10.2109/jcersj.104.614.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Sun, Ellen Y., Paul F. Becher, Shyh-Lung Hwang, Shirley B. Waters, George M. Pharr, and Ting Y. Tsui. "Properties of siliconaluminumyttrium oxynitride glasses." Journal of Non-Crystalline Solids 208, no. 1-2 (November 1996): 162–69. http://dx.doi.org/10.1016/s0022-3093(96)00510-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Kumar, Rajendran Senthil, and Roy Johnson. "Aqueous Slip Casting of Transparent Aluminum Oxynitride." Journal of the American Ceramic Society 99, no. 10 (June 10, 2016): 3220–25. http://dx.doi.org/10.1111/jace.14349.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Okeke, Onyekwelu U., and J. E. Lowther. "Elastic constants of oxynitride aluminum spinel phases." Chemical Physics Letters 494, no. 4-6 (July 2010): 323–25. http://dx.doi.org/10.1016/j.cplett.2010.06.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Мачулянський, О., Александра Владимировна Борисова, М. К. Родионов, В. Смілик, and Ю. Якименко. "Aluminum oxynitride dielectric films prepared by reactive sputtering." Electronics and Communications 20, no. 3 (November 15, 2015): 31. http://dx.doi.org/10.20535/2312-1807.2015.20.3.53591.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Xidong, Wang, Wang Fuming, and Li Wenchao. "Synthesis, microstructures and properties of γ-aluminum oxynitride." Materials Science and Engineering: A 342, no. 1-2 (February 2003): 245–50. http://dx.doi.org/10.1016/s0921-5093(02)00282-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

YAMASHITA, Hiroshi, and Akira YAMAGUCHI. "Preparation and Properties of Aluminum Oxynitride (.GAMMA.-AlON)." Journal of the Ceramic Society of Japan 109, no. 1268 (2001): 310–14. http://dx.doi.org/10.2109/jcersj.109.1268_310.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

TAKEBE, Hiromichi, Tsuneji KAMEDA, Michiyasu KOMATSU, Katsutoshi KOMEYA, and Kenji MORINAGA. "Fabrication of Translucent Sintered Aluminum Oxynitride Spinel (AlON)." Journal of the Ceramic Society of Japan 97, no. 1122 (1989): 166–73. http://dx.doi.org/10.2109/jcersj.97.166.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Sekine, Toshimori, Xijun Li, Takamichi Kobayashi, Yasuyuki Yamashita, Parimal Patel, and James W. McCauley. "Aluminum oxynitride at pressures up to 180 GPa." Journal of Applied Physics 94, no. 8 (2003): 4803. http://dx.doi.org/10.1063/1.1608476.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

KIM, IL-UNG, and VON L. RICHARDS. "High-Temperature Electrical Conductivity of Aluminum Oxynitride Spinel." Journal of the American Ceramic Society 68, no. 8 (August 1985): C—210—C—212. http://dx.doi.org/10.1111/j.1151-2916.1985.tb10187.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Fang, Chang Ming, Rudi Metselaar, Hubertus T. Hintzen, and Gijsbertus With. "Structure Models for γ-Aluminum Oxynitride fromAb InitioCalculations." Journal of the American Ceramic Society 84, no. 11 (November 2001): 2633–37. http://dx.doi.org/10.1111/j.1151-2916.2001.tb01064.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Silvy, Ricardo Prada, Mihaela Florea, Nathalie Blangenois, and Paul Grange. "Propane ammoxidation catalyst based on vanadium-aluminum oxynitride." AIChE Journal 49, no. 8 (August 2003): 2228–31. http://dx.doi.org/10.1002/aic.690490830.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Ruan, Guozhi, Haisen Xu, Zhihui Zhang, Mingqiang Yin, Guogang Xu, and Xiaoyuan Zhan. "New Method of Synthesizing Aluminum Oxynitride Spinel Powders." Journal of the American Ceramic Society 96, no. 6 (April 29, 2013): 1706–8. http://dx.doi.org/10.1111/jace.12366.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Miller, Lior, and Wayne D. Kaplan. "Water-Based Method for Processing Aluminum Oxynitride (AlON)." International Journal of Applied Ceramic Technology 5, no. 6 (November 2008): 641–48. http://dx.doi.org/10.1111/j.1744-7402.2008.02245.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Wang, Xidong, Wenchao Li, and Seshadri Seetharaman. "Thermodynamic study and synthesis of gamma-aluminum oxynitride." Scandinavian Journal of Metallurgy 31, no. 1 (February 2002): 1–6. http://dx.doi.org/10.1034/j.1600-0692.2002.310101.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Granon, Arielle, Patrice Goeuriot, and François Thevenot. "Aluminum magnesium oxynitride: A new transparent spinel ceramic." Journal of the European Ceramic Society 15, no. 3 (January 1995): 249–54. http://dx.doi.org/10.1016/0955-2219(95)93946-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Galakhov, A. B., V. A. Zelenskii, L. V. Vinogradov, V. I. Antipov, and M. I. Alymov. "Synthesis of aluminum oxynitride from starter organic compounds." Refractories and Industrial Ceramics 53, no. 4 (November 2012): 269–71. http://dx.doi.org/10.1007/s11148-012-9505-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Ilyin, Alexander P., Liudmila O. Root, and Andrei V. Mostovshchikov. "The Influence of Aluminium Nanopowder Density on the Structure and Properties of its Combustion Products in Air." Key Engineering Materials 685 (February 2016): 521–24. http://dx.doi.org/10.4028/www.scientific.net/kem.685.521.

Full text

Abstract:

The intermediate and final combustion products of pressed aluminum nanopowder are studied. It is found that the main combustion product is aluminum nitride. In the intermediate stages of combustion, aluminum oxide (γ-Al2O3) and oxynitride (Al5O6N) are the first to form on the sample surface, and aluminum nitride is formed next. The use of sliding (incident at a small angle to the surface) synchrotron radiation made it possible to determine with high accuracy (in time) the sequence of stages of formation of crystalline products during combustion of the aluminum nanopowder.

APA, Harvard, Vancouver, ISO, and other styles

32

Ho, Wei Yu, Pin Hua Hsu, and Chien Liang Lin. "Characteristics of Aluminum Chromium Nitride, and Aluminum Chromium Oxynitride Coating through Cathodic Arc Deposition." Key Engineering Materials 735 (May 2017): 70–74. http://dx.doi.org/10.4028/www.scientific.net/kem.735.70.

Full text

Abstract:

Aluminum chromium nitride (AlCrN) coatings and aluminum chromium oxynitride (AlCrON) coatings were successfully fabricated through cathodic arc deposition with pulsed bias. The results indicated that both AlCrN and AlCrON coatings had a lower coefficient of friction against AISI 52100 bearing ball under dry conditions than CrN coating. The hardness of the AlCrN coating was in the range of 30 GPa, two times higher than that of the AlCrON coating. Thermogravimetric and differential scanning calorimetry analyzer (TGA/DSC) confirmed the best thermal stability of the AlCrON coating during the test.

APA, Harvard, Vancouver, ISO, and other styles

33

Tucto, K., L. Flores, J. Guerra, J. Töfflinger, J. Dulanto, R. Grieseler, A. Osvet, M. Batentschuk, and R. Weingärtner. "Production and Characterization of Tb3+/Yb3+ Co-Activated AlON Thin Films for Down Conversion Applications in Photovoltaic Cells." MRS Advances 2, no. 52 (2017): 2989–95. http://dx.doi.org/10.1557/adv.2017.478.

Full text

Abstract:

ABSTRACTTerbium and ytterbium co-doped aluminum oxynitride thin films were grown onto silicon substrates using radiofrequency magnetron sputtering. Aluminum oxynitride samples doped with 4.6 at. % of Yb3+ and co-doped with 0.4 at. % of Tb3+ were obtained. The prepared samples were annealed from 150°C to 850°C in steps of 100°C. By using energy dispersive X-ray analysis we measured the sample composition and the doping concentration. The emission intensities at different annealing temperatures were characterized using photoluminescence measurements upon excitation at 325 nm. The 5D4 → 7F5 main transition of Tb3+ and the characteristic near infrared emission at 980 nm of Yb3+ were recorded. In order to study the luminescence behavior of the samples in terms of a down conversion process, we have plotted the integrated areas of the main transition peaks versus the annealing temperature.

APA, Harvard, Vancouver, ISO, and other styles

34

Tian, Ting Yan, Hong Bing Du, Feng Sun, and Hua Wei Jiang. "Synthesis of Aluminum Oxynitride Powder by Carbothermal Reduction Method." Advanced Materials Research 105-106 (April 2010): 791–93. http://dx.doi.org/10.4028/www.scientific.net/amr.105-106.791.

Full text

Abstract:

γ-aluminum oxynitride (γ-ALON) powder was prepared by carbothermal reduction method using γ-Al2O3 and activated carbon as raw materials. Effects of activated carbon content, synthesizing temperature, holding time and carbon impurity on ALON powder were studied. It was found a ‘two-step’ procedure, first sintering at about 1550°C-1650°C then at about 1750°C-1850°C, was effective to prepare high-purity ALON powder. The removal of carbon impurity was crucial for the preparation of ALON powder, which effectively improved the purity of ALON powder. The prepared powder was characterized by XRD and SEM, which indicated that pure ALON powder prepared by a ‘two-step’ procedure had well-developed crystalline and homogenous granularity. Transparent ALON ceramics were prepared by hot-press sintering at 1850~1900°C for up to 2~4h using ALON powder and some sintering additive, the transmission of sample with thickness of 1mm was 81% at infrared wave.

APA, Harvard, Vancouver, ISO, and other styles

35

Deng, Lianyun, Jingxuan Lei, Ying Shi, Ting Lin, Yuying Ren, and Jianjun Xie. "Photoluminescence of Tb3+/Ce3+ co-doped aluminum oxynitride powders." Materials Letters 65, no. 4 (February 2011): 769–71. http://dx.doi.org/10.1016/j.matlet.2010.11.027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

DAI, Wenbin, Akira YAMAGUCHI, Wei LIN, Junji OMMYOJI, Jingkun YU, and Zongshu ZOU. "Oxidation Behavior of Magnesium Aluminum Oxynitride with Different Composition." Journal of the Ceramic Society of Japan 115, no. 1343 (2007): 409–13. http://dx.doi.org/10.2109/jcersj.115.409.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

LIU, Xue-Jian, Hui-Li LI, Zheng-Ren HUANG, Shi-Wei WANG, and Dong-Liang JIANG. "Preparation of Aluminum Oxynitride Powders by Solid-State Reaction." Journal of Inorganic Materials 24, no. 6 (November 24, 2009): 1159–62. http://dx.doi.org/10.3724/sp.j.1077.2009.01159.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Ianno, N. J., H. Enshashy, and R. O. Dillon. "Aluminum oxynitride coatings for oxidation resistance of epoxy films." Surface and Coatings Technology 155, no. 2-3 (June 2002): 130–35. http://dx.doi.org/10.1016/s0257-8972(02)00051-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Senthil Kumar, Rajendran, Kotikalapudi Rajeswari, Balakrishnan Praveen, Unnikrishnan Nair Saraswathy Hareesh, and Roy Johnson. "Processing of Aluminum Oxynitride Through Aqueous Colloidal Forming Techniques." Journal of the American Ceramic Society 93, no. 2 (February 2010): 429–35. http://dx.doi.org/10.1111/j.1551-2916.2009.03418.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Prosvirnin, D. V., A. G. Kolmakov, M. D. Larionov, M. E. Prutskov, and A. V. Levina. "Methods and techniques for producing ceramics from aluminum oxynitride." IOP Conference Series: Materials Science and Engineering 525 (June 7, 2019): 012067. http://dx.doi.org/10.1088/1757-899x/525/1/012067.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Hwangbo, Chang Kwon, Linda J. Lingg, John P. Lehan, H. Angus Macleod, and F. Suits. "Reactive ion assisted deposition of aluminum oxynitride thin films." Applied Optics 28, no. 14 (July 15, 1989): 2779. http://dx.doi.org/10.1364/ao.28.002779.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Akhmadullina, N. S., A. V. Ishchenko, V. V. Yagodin, A. S. Lysenkov, V. P. Sirotinkin, Yu F. Kargin, and B. V. Shul’gin. "Synthesis and Luminescence Properties of Tb3+-Doped Aluminum Oxynitride." Inorganic Materials 55, no. 12 (December 2019): 1223–29. http://dx.doi.org/10.1134/s002016851912001x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Lee, Jae Ryeong, Ikkyu Lee, Hun Saeng Chung, Jong Gwan Ahn, Dong Jin Kim, and Byoung Gyu Kim. "Self-Propagating High-Temperature Synthesis for Aluminum Oxynitride (AlON)." Materials Science Forum 510-511 (March 2006): 662–65. http://dx.doi.org/10.4028/www.scientific.net/msf.510-511.662.

Full text

Abstract:

As the result of combustion reaction in Al-Al2O3-N2 system, AlON phase can be synthesized in the range of initial nitrogen pressure, from 1 to 5 MPa. On the occasion of rm = 0.3, the unreacted Al was detected in the case of 1 MPa of PN2. Its intensity decreases with an increase of nitrogen pressure. Ultimately, no peak of Al was observed in the product at nitrogen pressure of 5 MPa. In addition, the peak intensity of AlON in the products increases proportionally with the nitrogen pressure, while the intensities of AlN and Al2O3 decrease slightly with an increase of nitrogen pressure. The formation of AlON may be induced by successive two reactions. The former is the formation of AlN, and the latter is the reaction between AlN and Al2O3 in the after-burning period sustaining high temperature.

APA, Harvard, Vancouver, ISO, and other styles

44

Wang, Y., and T. L. Alford. "Formation of aluminum oxynitride diffusion barriers for Ag metallization." Applied Physics Letters 74, no. 1 (January 4, 1999): 52–54. http://dx.doi.org/10.1063/1.123130.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Zhao, X. J., H. Q. Ru, N. Zhang, X. Y. Wang, and D. L. Chen. "Corrosion of aluminum oxynitride based ceramics by molten steel." Ceramics International 39, no. 3 (April 2013): 3049–54. http://dx.doi.org/10.1016/j.ceramint.2012.09.084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Zheng, Yongting, Hongbo Li, Wei Zhou, Xiaonan Zhang, and Guorui Ye. "Combustion synthesis and characteristics of aluminum oxynitride ceramic foams." Ceramics International 38, no. 6 (August 2012): 5139–44. http://dx.doi.org/10.1016/j.ceramint.2012.03.018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Wang, Xidong, Wenchao Li, Du Sichen, and Seshadri Seetharaman. "Kinetic studies of the oxidation of γ-aluminum oxynitride." Metallurgical and Materials Transactions B 33, no. 2 (April 2002): 201–7. http://dx.doi.org/10.1007/s11663-002-0005-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Guo, J. J., K. Wang, T. Fujita, J. W. McCauley, J. P. Singh, and M. W. Chen. "Nanoindentation characterization of deformation and failure of aluminum oxynitride." Acta Materialia 59, no. 4 (February 2011): 1671–79. http://dx.doi.org/10.1016/j.actamat.2010.11.034.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Wilmański, Alan, Magdalena Zarzecka-Napierała, and Zbigniew Pędzich. "Combustion Synthesis of Aluminum Oxynitride in Loose Powder Beds." Materials 14, no. 15 (July 27, 2021): 4182. http://dx.doi.org/10.3390/ma14154182.

Full text

Abstract:

This paper describes combusting loose powder beds of mixtures of aluminum metal powders and aluminum oxide powders with various grain sizes under various nitrogen pressure. The synthesis conditions required at least 20/80 weight ratio of aluminum metal powder to alumina powder in the mix to reach approximately 80 wt% of γ-AlON in the products. Finely ground fused white alumina with a mean grain size of 5 μm was sufficient to achieve results similar to very fine alumina with 0.3 μm grains. A lower nitrogen pressure of 1 MPa provided good results, allowing a less robust apparatus to be used. The salt-assisted combustion synthesis upon addition of 10 wt% of ammonium nitrite resulted in a slight increase in product yield and allowed lower aluminum metal powder content in mixes to be ignited. Increasing the charge mass five times resulted in a very similar γ-AlON yield, providing a promising technology for scaling up. Synthesis in loose powder beds could be utilized for effective production of relatively cheap and uniform AlON powder, which could be easily prepared for forming and sintering without intensive grounding and milling, which usually introduce serious contamination.

APA, Harvard, Vancouver, ISO, and other styles

50

Tezuka, Keitaro, Yoshimi Tokuhara, Makoto Wakeshima, Yue Jin Shan, Hideo Imoto, and Yukio Hinatsu. "Crystal Structures and Properties of Europium Aluminum Oxynitride Eu2AlO3.75N0.1 and Europium Aluminum Oxide EuAl2O4." Inorganic Chemistry 52, no. 22 (November 5, 2013): 12972–79. http://dx.doi.org/10.1021/ic4013334.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Aluminum-oxynitride'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles