Relevant bibliographies by topics / Aluminum coatings

Academic literature on the topic 'Aluminum coatings'

Author: Grafiati
Published: 4 June 2021
Last updated: 5 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminum coatings.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aluminum coatings"

1

Lazarevic, Zorica, Vesna Miskovic-Stankovic, Zorica Kacarevic-Popovic, and Dragutin Drazic. "Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces." Chemical Industry 56, no. 11 (2002): 468–72. http://dx.doi.org/10.2298/hemind0211468l.

Full text
Abstract:
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl solution, using electrochemical impedance spectroscopy (EIS) and thermogravimetric analysis (TGA). Better protective properties of the epoxy coatings on anodized and chromatized-phosphatized aluminum with respect to the same epoxy coatings on aluminum and phosphatized aluminum were obtained: higher values of Rp and Rct and smaller values of Cc and Cd, from EIS, and a smaller amount of absorbed water inside the coating, from TGA. On the other hand, a somewhat lower thermal stability of these coatings was obtained (smaller values of the ipdt temperature). This behavior can be explained by the less porous structure of epoxy coatings on anodized and chromatized-phosphatized aluminum, caused by a lower rate of H2 evolution and better wet ability.
APA, Harvard, Vancouver, ISO, and other styles
2

Zhu, Sheng, Guo Feng Han, Xiao Ming Wang, Yu Xiang Liu, and Zhi Qian Wang. "Electrochemical Characteristics of TiAl Coating on Aluminum Alloy Surface by Supersonic Particles Deposition." Advanced Materials Research 1051 (October 2014): 199–203. http://dx.doi.org/10.4028/www.scientific.net/amr.1051.199.

Full text
Abstract:
In this study, Ti-45Al-7Nb-4V alloy protective coating which base on γ-TiAl phase was deposited on the surface of 5803 aluminum alloy by supersonic particles deposition technology. Researchers observed the micro-structure of the TiAl alloy casting and coating by SEM, and researched the electrochemical characteristics and the galvanic corrosion between TA2 titanium alloy and 5083 aluminum alloy or TiAl alloy casting and coating by electrochemical work station. The results show that,the galvanic corrosion current between 5083 aluminium alloy and TA2 titanium alloy declines from 16.2μA to 0.27μA after TiAl protecting coatings are prepared on the substrates, besides, the corrosion susceptibility drops from E degree to A degree. It also manifests that the 5083 aluminium alloy with Ti-45Al-7Nb-4V coatings can be contacted and utilized with TA2 titanium alloy directly, which tackles the issues of gavanic corrosion prevention between aluminium alloys and titanium alloys.
APA, Harvard, Vancouver, ISO, and other styles
3

Ha, Pham Thi, Pham Thi Ly, Nguyen Van Tuan, Vo An Quan, and Le Thu Quy. "EFFECTS OF ALUMINUM PHOSPHATE CONTAINING Al2O3 NANOPARTICLES ON THE MECHANICAL PROPERTIES OF THE Al2O3-TiO2 PLASMA SPRAYED COATING." Vietnam Journal of Science and Technology 55, no. 6 (December 11, 2017): 698. http://dx.doi.org/10.15625/2525-2518/55/6/9026.

Full text
Abstract:
In the present study, Al2O3-40% TiO2 composite coatings were fabricated on CT3 steel substrate by plasma spraying technique. The coatings were sealed with aluminum phosphate solution contained 5 wt.% Al2O3 nanoparticles and then heat treated at 400oC. The permeability of aluminum phosphate solution, phase composition, structure morphology, microhardness and wear resistance of the coating were studied. The study results phase composition of the coatings showed that the coatings were composed γ-Al2O3 and Al2TiO5 phase. The compounds AlPO4 and Al(PO3)3 were found in the coating sealed with aluminum phosphate. The presence of Al2O3 nanoparticles was increased the permeability of the aluminum phosphate solution into the coating. The coatings sealed with aluminum phosphate contained Al2O3 nanoparticles have lower density, higher hardness and wear resistance higher than the coating sealed with aluminum phosphate uncontain Al2O3 nanoparticles and the unsealed coating.
APA, Harvard, Vancouver, ISO, and other styles
4

Alshmri, F. "Metallic Coatings: Al-Zn Alloys." Advanced Materials Research 915-916 (April 2014): 608–11. http://dx.doi.org/10.4028/www.scientific.net/amr.915-916.608.

Full text
Abstract:
Steel sheet has one major drawback, it is attacked by moisture at low temperatures and oxygen at high temperatures. Fortunately, coatings can provide protection to steel sheet from corrosion. Aluminum and aluminum zinc coatings can be applied by different methods. These are chemical vapor deposition coating (CVD), slurry coating, vacuum coating, spray coating, cladding, electroplating, electrophoresis, diffusion coatings, cementation, calorizing and hot dipping. This paper aims at providing a survey of these processes.
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Cheng Zhou, Wei Ze Wang, and Kai Di Cheng. "A Comparative Study on the Wear and Corrosion Resistance of Coatings." Applied Mechanics and Materials 853 (September 2016): 441–45. http://dx.doi.org/10.4028/www.scientific.net/amm.853.441.

Full text
Abstract:
The vessel containing sulfur particles has been found failing due to the effect of corrosion and erosion by the sulfur particles. Several coatings, including zinc-aluminum coating, wear-resistance painting and two kinds of polymer, have been provided to resist the negative influence of sulfur in the present study. The wear and corrosion resistance of the selected coatings has been measured to study the performance difference. Impact test has also been done to investigate the bonding condition of coatings under the impact or bending load. The microstructure of coatings before and after wear test is observed by the Optical Microscope (OM) and Scanning Electron Microscope (SEM). The experiment results reveal that one of the polymer coatings shows the best performance in the corrosion resistance, another polymer coating’s wear resistance is better than others. The coatings are bonded well with the substrate except the zinc-aluminum coating. The performance of painting is ordinary in this investigation.
APA, Harvard, Vancouver, ISO, and other styles
6

Ho, Wei Yu, Pin Hua Hsu, and Chien Liang Lin. "Characteristics of Aluminum Chromium Nitride, and Aluminum Chromium Oxynitride Coating through Cathodic Arc Deposition." Key Engineering Materials 735 (May 2017): 70–74. http://dx.doi.org/10.4028/www.scientific.net/kem.735.70.

Full text
Abstract:
Aluminum chromium nitride (AlCrN) coatings and aluminum chromium oxynitride (AlCrON) coatings were successfully fabricated through cathodic arc deposition with pulsed bias. The results indicated that both AlCrN and AlCrON coatings had a lower coefficient of friction against AISI 52100 bearing ball under dry conditions than CrN coating. The hardness of the AlCrN coating was in the range of 30 GPa, two times higher than that of the AlCrON coating. Thermogravimetric and differential scanning calorimetry analyzer (TGA/DSC) confirmed the best thermal stability of the AlCrON coating during the test.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhu, Qing Jun, Kai Wang, and Xin Hong Wang. "Corrosion Behavior of Cold-Spray Aluminum Coating in Marine Environment." Advanced Materials Research 160-162 (November 2010): 364–68. http://dx.doi.org/10.4028/www.scientific.net/amr.160-162.364.

Full text
Abstract:
Aluminum coatings were prepared by cold spray on mild carbon steel Q235. Scanning electron microscopy shows that the bond zone has good bonding between the substrate and the coating and the coatings consist of interlocked particles. The corrosion behaviors of the coatings in marine environment were studied by electrochemical methods. Free corrosion potentials of aluminum coatings are much lower than that of Q235. Potentiodynamic polarization measurements show that the curves of aluminum coatings have activity anodic dissolution zone, passivation zone and super-passivation zone. Corrosion morphology and energy dispersive spectrometers show that Cl- can penetrate into the coating and some of the substrate has been corroded. Corrosion only can happen on the coating surface and specific deeper sites, where Cl- can penetrate through pores. Cold spray aluminum coatings can protect the substrate from corrosion in marine environment.
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Wen Sheng, and Yi Liu. "Effect of Ce on Wear Behavior of Plasma Spray Welded Novel Aluminum Bronze Coatings." Advanced Materials Research 418-420 (December 2011): 831–34. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.831.

Full text
Abstract:
Aluminum bronze powders with free and 0.1wt%Ce were plasma spray welded on 45# carbon steel substrate, Effects of rare earth Ce on the microstructure and wear resistance of plasma spray welded novel aluminum bronze coatings were investigated. Tribological properties of coatings were tested on reciprocating sliding tester. Results showed that a small amount of Ce (0.1wt %) in novel aluminum bronze coating can refine the coating microstructure and the coating with 0.1wt%Ce process higher wear resistance compared to the Ce-free coating. Both of the coatings have different wear mechanisms.
APA, Harvard, Vancouver, ISO, and other styles
9

Algahtani, Ali, Essam Mahmoud, Sohaib Khan, and Vineet Tirth. "Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy." Processes 6, no. 12 (November 26, 2018): 240. http://dx.doi.org/10.3390/pr6120240.

Full text
Abstract:
Aluminum alloys cannot be used in aggressive corrosion environments application. In this paper, three different surface coating technologies were used to coat the 6082-T6 aluminum alloy to increase the corrosion resistance, namely Plasma Electrolytic Oxidation (PEO), Plasma Spray Ceramic (PSC) and Hard Anodizing (HA). The cross-sectional microstructure analysis revealed that HA coating was less uniform compared to other coatings. PEO coating was well adhered to the substrate despite the thinnest layer among all three coatings, while the PSC coating has an additional loose layer between the coat and the substrate. X-ray diffraction (XRD) analysis revealed crystalline alumina phases in PEO and PSC coatings while no phase was detected in HA other than an aluminum element. A series of electrochemistry experiments were used to evaluate the corrosion performances of these three types of coatings. Generally, all three-coated aluminum showed better corrosion performances. PEO coating has no charge transfer under all Inductive Coupled Plasma (ICP) tests, while small amounts of Al3+ were released for both HA and PSC coatings at 80 °C. The PEO coating showed the lowest corrosion current density followed by HA and then PSC coatings. The impedance resistance decreased as the immersion time increased, which indicated that this is due to the degradation and deterioration of the protective coatings. The results indicate that the PEO coating can offer the most effective protection to the aluminum substrate as it has the highest enhancement factor under electrochemistry tests compared to the other two coatings.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhu, Qing Jun, and Kai Wang. "Microstructure and Anti-Corrosion Properties of Arc-Sprayed Aluminum Coating in Splash Zone." Advanced Materials Research 199-200 (February 2011): 1949–53. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.1949.

Full text
Abstract:
Aluminum coatings were developed by arc spray on mild carbon steel Q235. Scanning electron microscopy detection shows that the coatings have good bonding with the substrate and have low porosity. The corrosion behaviors of the coatings in splash zone were studied. The results show that free corrosion potentials of aluminum coatings are much lower than that of Q235. Potentiodynamic polarization measurements reveal that the curves of aluminum coatings have activity anodic dissolution zone, passivation zone and super-passivation zone. Corrosion morphology and energy dispersive spectrometers show that Cl- can penetrate into the coatings and some of the substrate has been corroded. The arc spray Al-coating develops a film of corrosion products on the coating surface, which tend to seal the pores in the coatings. Arc spray aluminum coatings can protect the substrate from corrosion in splash zone.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Aluminum coatings"

1

ZIPPERIAN, DONALD CHARLES. "PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE ZINCATE IMMERSION PROCESS FOR ALUMINUM AND ALUMINUM ALLOYS." Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184123.

Full text
Abstract:
A detailed experimental study has been carried out to investigate the zincate immersion deposition process for 99.99%, 6061, and 356-T6 aluminum samples. In particular, the effect of iron and tartrate in the immersion bath, the aluminum surface preparation, and the relationship of the first immersion step to the second immersion step were investigated by chemical, electrochemical (polarization and rest potentials), and surface analytical scanning electron microscopy (SEM), transmission electron microscopy (TEM), Rutherford backscattering spectrometry (RBS), X-ray photoelectron spectroscopy (XPS), and Auger electron spectroscopy (AES) techniques. Eh-pH diagrams were constructed to determine the most stable zinc, iron, and aluminum species in solution. These diagrams predict that ferrous and ferric ions, as well as aluminum should form stable complexes with tartrate at the typical immersion deposition conditions (Eh -0.9 to -1.0 and pH 14 to 15). Experimentally, tartrate was found to enhance the dissolution rate of aluminum in highly caustic solutions. The addition of ferric chloride to the immersion bath produced coatings that were more crystalline, and also decreased the amount of hydrogen gas evolved in the second immersion step. The deposition of zinc and iron during the second immersion step was considerably less than that during the first immersion step. The second immersion coating became more adherent as the initial surface roughness decreased, and as grain size was increased the second immersion coating became thicker. For increasing grain size the micrographs for the first and second immersion coatings showed that the coatings became more localized. The second immersion coating thickness and morphology were also dependent upon several first immersion variables, such as bath temperature, immersion time and bath composition. Increased dissolution rates of aluminum in the first immersion produced thinner coatings with a finer crystallite growth. Increased bath temperature and increased first immersion time enhanced the dissolution rate of aluminum. The zinc coating slowed the dissolution rate of aluminum. When zinc was absent from the first immersion bath, the aluminum dissolution was much faster and resulted in thinner coatings upon subsequent second immersion. The molar ratio of zinc deposited to aluminum dissolved was a constant value of 1.1 for both first and second immersions; the molar ratio was also constant for the different aluminum substrates examined in this investigation.
APA, Harvard, Vancouver, ISO, and other styles
2

AKUNDY, GOURI. "DEPOSITION OF POLYANILINE-POLYPYRROLE COMPOSITE COATINGS ON ALUMINUM." University of Cincinnati / OhioLINK, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=ucin990562534.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yixiao, Feng. "ZINC ALUMINUM PHOSPHATE PIGMENTED POLYURETHANE/POLYSILOXANE COATINGS FOR ANTICORROSION." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1525950059586312.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cai, Hong. "Microbiologically influenced corrosion and titanate conversion coatings on aluminum alloy 2024-T3 /." View online ; access limited to URI, 2006. http://0-wwwlib.umi.com.helin.uri.edu/dissertations/dlnow/3225314.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hendrick, Michelle Renee. "The effects of combustion CVD-applied alumina coatings on the high temperature oxidation of a Ni-Cr alloy." Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/19635.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Akhtar, Anisa Shera. "Surface science studies of conversion coatings on 2024-T3 aluminum alloy." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/1713.

Full text
Abstract:
The research in this thesis aims to develop new mechanistic knowledge for coating processes at 2024-Al alloy surfaces, ultimately to aid the design of new protective coatings. Coatings formed by phosphating, chromating, and permanganating were characterized especially by scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy, and scanning electron microscopy . The objective was to learn about growth (nm level) as a function of time for different coating baths, as well as a function of lateral position across the different surface microstructural regions, specifically on the μm-sized Al-Cu-Mg and Al-Cu-Fe-Mn particles which are embedded in the alloy matrix . The research characterizes coating thickness, composition, and morphology. The thesis emphasizes learning about the effect of different additives in zinc phosphating baths . It was found that the Ni²⁺ additive has two main roles : first, the rate of increase in local solution pH is limited by the slower kinetics of reactions involving Ni²⁺ compared to Zn²⁺, leading to thinner zinc phosphate (ZPO) coatings when Ni²⁺ is present. Second, most Ni²⁺ deposition occurs during the later stages of the coating process in the form of nickel phosphate and a Ni-Al oxide in the coating pores on the alloy surface, increasing the corrosion resistance. Aluminum fluoride precipitates first during the initial stages of the coating process, followed by aluminum phosphate, zinc oxide, and finally ZPO. When Ni²⁺ is present in the coating solution at 2000 ppm, ZnO predominates in the coating above the A-Cu-Fe-Mn particle while ZPO dominates on the rest of the surface. The Mn²⁺ additive gives a more even coating distribution (compared with Ni²⁺) across the whole surface. The Mn²⁺ -containing ZPO coating is similar to the chromate coating in terms of evenness, while there is more coating deposition at the second-phase particles for permanganate coatings. The oxides on the Al-Cu-Fe-Mn and matrix regions are similar before coating, thereby confirming that a variety of observed differences in ZPO coating characteristics at these regions arise from the different electrochemical characteristics of the underlying metals. Upon exposure to a corrosive solution, the ZPO coating provides more protection to the second-phase particles compared to the matrix.
APA, Harvard, Vancouver, ISO, and other styles
7

Zou, Yu. "Microstructural studies of cold sprayed pure nickel, copper and aluminum coatings." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:8881/R/?func=dbin-jump-full&object_id=92381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Palomino, Ore Sheyla Bethsy. "Effect of aluminum oxyhydroxide coatings on the performance of limestone drains." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/83860.

Full text
Abstract:
Neutralization by limestone is a common treatment for acid mine drainage (AMD). The effectiveness of using limestone to treat AMD can be reduced by aluminum (Al) and iron (Fe) oxyhydroxide coatings that form on the limestone, because the coatings inhibit the transport, and thus neutralization, of hydrogen ions (H+) derived from acid mine drainage. I used mixed flow reactor experiments to investigate the effect of Al coatings on the diffusion of H+ to the surface of limestone and to quantify how those Al coatings affect the limestone dissolution rate. Experiments used acidic Al sulfate solutions with initial Al concentrations ranging from 0.002 M to 0.01 M (32 to 329 ppm) and pH values ranging from 3.7 to 4.2, which are typical of conditions found at AMD sites. Cleaved pieces of Iceland spar calcite were used as a proxy for limestone. The pH was measured in the effluent to determine the rate of H+ consumption. Effluent solutions were analyzed for Al, calcium (Ca) and sulfur (S) using inductively coupled plasma optical emission spectroscopy (ICP OES). Examination of the precipitated coatings using x-ray diffraction indicated that amorphous poorly crystalline gibbsite is the primary Al coating but scanning electron microscope analysis also suggests the possible presence of a poorly crystalline sulfur containing phase, such as hydrobasaluminite. The experimental data were used to calculate the diffusion coefficient of H+ through the Al coatings. The calculated diffusion coefficient for H+, assuming a gibbsite and/or hydrobasaluminite layer, ranged between 10-13 to 10-11 m2/sec, that are significantly lower than in pure water.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
9

Berube, Gregoire. "Development of metastable aluminum alloy coatings and parts for automotive applications." Thesis, University of Ottawa (Canada), 2009. http://hdl.handle.net/10393/28328.

Full text
Abstract:
In this study, a metastable Al-Fe-V-Si alloy powder was produced by rapid solidification using the gas atomization process. The alloy composition was chosen for its mechanical properties at elevated temperature for potential applications in internal combustion gasoline engines. The microstructural properties of the Al-Fe-V-Si powder were determined through transmission electron microscopy imaging and selected area electron diffraction indexing, energy dispersive spectroscopy, X-ray diffraction and differential scanning calorimetry. Three distinct microstructures were observed as well as two different phases, namely a Al13(Fe,V)3Si silicide phase and a metastable (Al,Si)x(Fe,V) micro-quasicrystalline icosahedral (MI) phase. The metastable MI phase was determined to be thermally stable up to 380°C, after which a phase transformation to silicide occurs. The Cold Gas Dynamic Spraying (CGDS) process was used to produce coatings of the alloy. This spray process was selected due to its relatively low operating temperature, thus preventing significant heating of the particles during spraying and as such allowing the original microstructure of the feedstock powder to be preserved within the coatings. Coatings were produced by CGDS using Helium and Nitrogen as propellant gases. The coatings microstructure was investigated using scanning electron microscopy and transmission electron microscopy analyses. The mechanical properties of the coatings were then evaluated through bond strength testing and microhardness testing.
APA, Harvard, Vancouver, ISO, and other styles
10

Guo, Xiaolei. "Corrosion inhibition of aluminum alloy 2024-T3 based on smart coatings, hybrid corrosion inhibitors, and organic conversion coatings." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1461188604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Aluminum coatings"

1

I͡A, Lukomskiĭ I͡U. Galʹvanicheskie i lakokrasochnye pokrytii͡a︡ na ali͡u︡minii i ego splavakh. Leningrad: "Khimii͡a︡," Leningradskoe otd-nie, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chattopadhyay, Ashok K. Aerospace and aircraft coatings. Philadelphia, Pa: Federation of Societies for Coatings Technology, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Denker, I. I. Zashchita izdeliĭ iz ali͡u︡minii͡a︡ i ego splavov lakokrasochnymi pokrytii͡a︡mi. 2nd ed. Moskva: Khimii͡a︡, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rahm, Jens. Beitrag zur Herstellung langfaserverstärkter Aluminium-Matrix-Verbundwerkstoffe durch Anwendung der Prepregtechnik. Chemnitz: TU Chemnitz, Fakultät für Maschinenbau, Lehrstuhl für Verbundwerkstoffe, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brasek, Thomas Peyton. Response of dual-layered structures subjected to shock pressure wave. Monterey, Calif: Naval Postgraduate School, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kondapalli, Satyanarayana. Surface modification of aluminium components by developing composite coatings using plasma powder arc welding process. Aachen: Shaker, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Symposium on Aluminum Surface Treatment Technology (1986 Boston, Mass.). Proceedings of the Symposium on Aluminum Surface Treatment Technology. Pennington, NJ (10 S. Main St., Pennington 08534-2896): Electrochemical Society, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Iwaszko, Józef. Kształtowanie struktury i składu fazowego przetapianych powłok tlenkowych ZrO2 i Al2O3. Częstochowa: Wydawn. Politechniki Częstochowskiej, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jamarani, F. Deposition of single-layer and graded aluminum nitride coatings on vanadium substrates using ion-beam assisted reactive evaporation (ITER task no. ETA-EC-BRL26). Mississauga, Ont: Canadian Fusion Fuels Technology Project, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

author, Fang Zhigang, and Jiang Bailing author, eds. Wei hu yang hua ji shu ji qi zai hai yang huan jing zhong de ying yong: Microarc oxidation technology and its applications in sea environments. Beijing: Guo fang gong ye chu ban she, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Aluminum coatings"

1

Cha, Sung Chul. "Coatings for Aluminum Die-Casting Dies." In Coating Technology for Vehicle Applications, 163–75. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14771-0_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Voigt, C., and C. G. Aneziris. "Functional Coatings on Alumina foam Ceramics for Aluminum Filtration." In Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013), 1315–20. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118837009.ch222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dahotre, Narendra B., and Lalitha R. Katipelli. "Oxidation Kinetics and Morphology of Laser Surface Engineered Hard Coating on Aluminum." In Elevated Temperature Coatings, 219–31. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118787694.ch17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yu, Bosco, and Glenn D. Hibbard. "Structural Coatings in Aluminum Alloy Microtruss Materials." In Supplemental Proceedings, 1–10. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118356074.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shahien, Mohammed, Motohiro Yamada, and Masahiro Fukumoto. "Thick Aluminum Nitride Coatings by Reactive DC Plasma." In Ceramic Transactions Series, 465–78. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119407270.ch43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Qu, C., P. Li, J. Fan, D. Edwards, W. Schulze, G. Wynick, R. E. Miller, et al. "Aluminum Oxide and Silicon Nitride Thin Films as Anti-Corrosion Layers." In Advanced Ceramic Coatings and Interfaces V, 123–34. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470943960.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Leon, D. D., R. T. Richter, and T. L. Levendusky. "Investigation of Coatings Which Prevent Molten Aluminum/Water Explosions." In Essential Readings in Light Metals, 1068–73. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118647783.ch134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bolotov, A. N., V. V. Novikov, and O. O. Novikova. "Fabrication and Triboengineering Properties of Aluminum Composite Ceramic Coatings." In Lecture Notes in Mechanical Engineering, 1269–77. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22041-9_132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Karakurkchi, Hanna, Maryna Ved’, and N. D. Sakhnenko. "Formation of Manganese-Containing PEO Coatings on Aluminum Alloys." In Springer Proceedings in Physics, 333–59. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51905-6_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

León, D. D., R. T. Richter, and T. L. Levendusky. "Investigation of Coatings Which Prevent Molten Aluminum/Water Explosions." In Essential Readings in Light Metals, 1068–73. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48228-6_134.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aluminum coatings"

1

Wilbrandt, Steffen, Olaf Stenzel, Hiroshi Nakamura, and Norbert Kaiser. "Protected and enhanced aluminum mirrors for the VUV." In Optical Interference Coatings. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/oic.2013.fc.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

ERGUDER, Tolga, and Ralph Faber. "Plasma Assisted Pulsed Magnetron Sputtering (PAPMS) of Aluminum Oxide." In Optical Interference Coatings. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/oic.2016.wb.11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kireitseu, Maksim, L. Yerakhavets, and Ion Nemerenco. "Fatigue of Aluminum-Alumina-Chrome Carbide Composite Coating." In 2002 International Joint Power Generation Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/ijpgc2002-26090.

Full text
Abstract:
In this paper fatigue and fracture of the Al-Al2O3-CrC, coatings have been investigated by in situ experiments performed in a scanning electron microscope. More importantly, micromechanical models using arrays of internal or surface cracks have been developed. The models provide mechanics of deformation and failure for the coating. The models also reveal the role of overloading in crack arrest, which may well be exploited in the safe design of toughened ceramics against fatigue. Initial overloads prior to cyclic loading are found to reduce significantly the crack driving force in post-overload fatigue crack growth. It expected that pre-service overloading has a great potential for improving the fatigue properties of composite coatings based on oxide ceramics and chrome carbide.
APA, Harvard, Vancouver, ISO, and other styles
4

Mosser, Mark F. "Progress on Environmentally Compliant Aluminum Ceramic Compressor Coatings." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-54294.

Full text
Abstract:
During the last decade there has been an increasing emphasis on compliance to ever stricter environmental laws as well as compliance to regulations that have been designed to protect workers from exposure to toxic or otherwise harmful substances or processes. This world-wide emphasis has forced a continuing review of materials and processes used in the manufacture and protection of compressor materials from corrosion. Turbine compressors have been coated with silicone aluminum paint, diffused nickel cadmium and aluminum pigmented ceramic coatings that contain hexavalent chromium. These three processes utilize various chemicals including toxic substances, carcinogens and volatile organic compounds (VOC). All three of the coating processes need to be either made compliant or eliminated from use. This paper will review efforts that have been made to develop compliant aluminum ceramic compressor coating materials as applied to various steel and stainless steel substrates. In all cases the new materials that have been developed are free of toxic or carcinogenic materials. Test results will be compared to specification requirements for chrome containing compressor coatings in the area of physical properties including surface finish, thickness and adhesion. Additionally, environmental test data will be presented based on standard test methods that compare new compliant coatings with conventional chrome containing materials. Finally, process steps and conditions will be described for these new coatings.
APA, Harvard, Vancouver, ISO, and other styles
5

Kamo, Lloyd, Roy Kamo, and Edgars Valdmanis. "Ceramic Coatings for Aluminum Engine Blocks." In Automotive Industry in Expanding Countries. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/911719.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Barrett, Michael J. "Clear Powder Coatings for Aluminum Wheels." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1989. http://dx.doi.org/10.4271/890351.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sun, Lirong, Neil Murphy, John Jones, and John Grant. "High Transparent Conductive Aluminum-doped Zinc Oxide Thin Films By Reactive Co-Sputtering." In Optical Interference Coatings. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/oic.2016.td.11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

ALWITT, R., R. MCCLUNG, and S. JACOBS. "Anodized aluminum coatings for thermal control. I - Coating process and stresses." In Materials Specialist Conference - Coating Technology for Aerospace Systems. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-2158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fu, Xinghai, Mireille Commandré, Laurent Gallais, Mathias Mende, Henrik Ehlers, and Detlev Ristau. "Laser-induced Damage in scandium, hafnium, aluminum oxides composites with silica in the infrared." In Optical Interference Coatings. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/oic.2013.fb.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sweet, William. "Confirming the Accuracy of NIST Calibration Values of Specular Reflectance for an Aluminum Mirror." In Optical Interference Coatings. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/oic.2013.thc.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Aluminum coatings"

1

Enos, David, and Kimberly Martinez. Durability of Corrosion Protection Coatings for Aluminum. Office of Scientific and Technical Information (OSTI), January 2017. http://dx.doi.org/10.2172/1505403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Buchheit, R. G., C. A. Drewien, M. A. Martinez, and G. E. Stoner. Chromate-free corrosion resistant conversion coatings for aluminum alloys. Office of Scientific and Technical Information (OSTI), March 1995. http://dx.doi.org/10.2172/28379.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Spencer, W., and P. Korinko. Aluminum and Other Coatings for the Passivation of Tritium Storage Vessels. Office of Scientific and Technical Information (OSTI), November 2016. http://dx.doi.org/10.2172/1332673.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Varacalle, D. J. Jr, G. C. Wilson, L. B. Lundberg, D. L. Hale, V. Zanchuck, W. Kratochvil, G. Irons, and A. Hodum. An SDE study of twin-wire electric arc sprayed nickel-aluminum coatings. Office of Scientific and Technical Information (OSTI), November 1995. http://dx.doi.org/10.2172/125079.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Buttry, Daniel A. Imaging Tools and Thin Film Coatings for Corrosion Prevention in Aluminum Alloys. Fort Belvoir, VA: Defense Technical Information Center, January 2008. http://dx.doi.org/10.21236/ada475440.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kelley, John V., Elizabeth A. Charleton, Steven M. Kilczewski, and Paul Huang. Efficacy of Two Novel Anodic Coatings for Enhanced Corrosion Protection of Aluminum Armor Alloys. Fort Belvoir, VA: Defense Technical Information Center, January 2014. http://dx.doi.org/10.21236/ada597719.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pokhmurskii, Vasyl. Effect of Chromate and Chromate-Free Organic Coatings on Corrosion Fatigue of an Aluminum Alloy. Fort Belvoir, VA: Defense Technical Information Center, February 2012. http://dx.doi.org/10.21236/ada563067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Natesan, K., and D. L. Rink. Physical and mechanical characteristics and chemical compatibility of aluminum nitride insulator coatings for fusion reactor applications. Office of Scientific and Technical Information (OSTI), April 1996. http://dx.doi.org/10.2172/230196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Race, Timothy D. Evaluation of Seven Sealer Systems for Metallized Zinc and Aluminum Coatings in Fresh and Salt Waters. Fort Belvoir, VA: Defense Technical Information Center, September 1992. http://dx.doi.org/10.21236/ada256758.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Placzankis, Brian E., Chris E. Miller, and John H. Beatty. Accelerated Corrosion Analysis of Nonchromate Conversion Coatings on Aluminum Alloys 5083, 7039, and 6061 for DoD Applications. Fort Belvoir, VA: Defense Technical Information Center, August 2001. http://dx.doi.org/10.21236/ada395925.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aluminum coatings' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography