Relevant bibliographies by topics / Aluminium alloy

Academic literature on the topic 'Aluminium alloy'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminium alloy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aluminium alloy"

1

Zou, Cheng Lu, Gui Hong Geng, and Wei Ye Chen. "Development and Application of Aluminium-Lithium Alloy." Applied Mechanics and Materials 599-601 (August 2014): 12–17. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.12.

Full text
Abstract:
The history of aluminium-lithium alloys development has been reviewed in this paper. According to the strength, weld ability and corrosion resistance, thermal stability and plasticity, aluminium-lithium alloy has been categorized and the defects of aluminium-lithium alloys in early stage have been analyzed. As compared the third generation of aluminium-lithium alloy with normal aluminum alloy and composite materials, it indicates aluminium-lithium alloy has better performance, lower cost and reduced weight. After analyzing the advantages and disadvantages of the rapid solidification, ingot casting metallurgy and electromagnetic simulated microgravity methods in synthesis of aluminium-lithium alloy, it has been found microgravity method has prominent effect on reducing the alloy segregation and lithium losses. Finally, the future development of aluminium-lithium alloys has been discussed.
APA, Harvard, Vancouver, ISO, and other styles
2

Han, Yu, Bao An Chen, Zhi Xiang Zhu, Dong Yu Liu, and Yan Qiu Xia. "Effects of Zr on Microstructure and Conductivity of Er Containing Heat-Resistant Aluminum Alloy Used for Wires." Materials Science Forum 852 (April 2016): 205–10. http://dx.doi.org/10.4028/www.scientific.net/msf.852.205.

Full text
Abstract:
It has particular heat-resistant property and conductivity of high-conductivity heat-resistant Aluminium alloys, which would be wildly applied in transmission and transformation flied. Al-Er-Zr alloys containing different content of Zr were prepared. The effect of Zr on microstructure of heat-resistance Aluminum alloy were studied by using of STEM, and thermodynamic behavior of Zr in Aluminium alloy was analyzed based on the theory of alloy phase formation. The results showed that the effect of Zr content on the grain size of heat-resistant aluminum alloy was remarkable, and the conductivity of heat-resistance Aluminum alloy was influenced.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhou, Jia, Jun Ping Zhang, and Ming Tu Ma. "Study on the Formability of Aluminium Alloy Sheets at Room and Elevated Temperatures." Materials Science Forum 877 (November 2016): 393–99. http://dx.doi.org/10.4028/www.scientific.net/msf.877.393.

Full text
Abstract:
This paper presents the main achievements of a research project aimed at investigating the applicability of the hot stamping technology to non heat treatable aluminium alloys of the 5052 H32 and heat treatable aluminium alloys of the 6016 T4P after six months natural aging. The formability and mechanical properties of 5052 H32 and 6016 T4P aluminum alloy sheets after six months natural aging under different temperature conditions were studied, the processing characteristics and potential of the two aluminium alloy at room and elevated temperature were investigated. The results indicated that the 6016 aluminum alloy sheet exhibit better mechanical properties at room temperature. 5052 H32 aluminum alloy sheet shows better formability at elevated temperature, and it has higher potential to increase formability by raising the temperature.
APA, Harvard, Vancouver, ISO, and other styles
4

Zhu, Sheng, Guo Feng Han, Xiao Ming Wang, Yu Xiang Liu, and Zhi Qian Wang. "Electrochemical Characteristics of TiAl Coating on Aluminum Alloy Surface by Supersonic Particles Deposition." Advanced Materials Research 1051 (October 2014): 199–203. http://dx.doi.org/10.4028/www.scientific.net/amr.1051.199.

Full text
Abstract:
In this study, Ti-45Al-7Nb-4V alloy protective coating which base on γ-TiAl phase was deposited on the surface of 5803 aluminum alloy by supersonic particles deposition technology. Researchers observed the micro-structure of the TiAl alloy casting and coating by SEM, and researched the electrochemical characteristics and the galvanic corrosion between TA2 titanium alloy and 5083 aluminum alloy or TiAl alloy casting and coating by electrochemical work station. The results show that,the galvanic corrosion current between 5083 aluminium alloy and TA2 titanium alloy declines from 16.2μA to 0.27μA after TiAl protecting coatings are prepared on the substrates, besides, the corrosion susceptibility drops from E degree to A degree. It also manifests that the 5083 aluminium alloy with Ti-45Al-7Nb-4V coatings can be contacted and utilized with TA2 titanium alloy directly, which tackles the issues of gavanic corrosion prevention between aluminium alloys and titanium alloys.
APA, Harvard, Vancouver, ISO, and other styles
5

Huynh, Khanh Cong, and Luc Hoai Vo. "Modification of aluminium and aluminium alloys by AL-B master alloy." Science and Technology Development Journal 17, no. 2 (June 30, 2014): 56–66. http://dx.doi.org/10.32508/stdj.v17i2.1315.

Full text
Abstract:
Chemical compositions and microstructures affect on mechanical – physical and working properties of aluminium and aluminum alloys. Transition elements, such as Ti, V, Cr, Zr in solid solution greatly reduce the electrical conductivity of aluminium and its alloys. For reduction of detrimental effects of transition elements, Al-B master alloys are added into molten aluminium to occur reactions of boron and transition elements to form diborides of titanium, vanadium, chromium and zirconium, which are markedly insoluble in molten aluminium, then these transition elements have an insignificant effects on conductivity. In addition, Al-B master alloys is also used as a grain refiner of aluminium and aluminium alloys. Aluminium borides particles in Al-B master alloys act as substrates for heterogeneous nucleation of aluminium and its alloys. Al-B master alloys are prepared from low cost materials, such as boric acid H3BO3 and cryolite Na3AlF6, by simple melting method, easily realize in electrical wire and cable factories.
APA, Harvard, Vancouver, ISO, and other styles
6

Bouzekova-Penkova, Anna, and Adelina Miteva. "Some Aerospace Applications of 7075 (B95) Aluminium Alloy." Aerospace Research in Bulgaria 34 (2022): 165–79. http://dx.doi.org/10.3897/arb.v34.e15.

Full text
Abstract:
Nowadays, aluminium alloys are of growing interest to scientists and are widely used in aerospace and allied industries due to their inherent lightness, high strength to weight ratio, excellent thermal and electrical conductance, good reflectivity and low working cost. Among the conventional structural materials used in aerospace applications aluminium alloys are frontrunners. This is due to the ability of modern aluminium alloys to achieve unique combination of properties, through alloying and heat treatment, tailored to particular applications. Aluminum alloy 7075 (B95) is a high-strength alloy that works in extreme conditions and is used in modern construction of aircraft, spacecraft and satellites. In this mini-review, we will briefly focus on some of the existing and growing applications of some 7xxx aluminum alloys, in particular 7075 (B95), in the aerospace industry. Possible options for continuing work in this area are considered, and some Bulgarian developments are presented.
APA, Harvard, Vancouver, ISO, and other styles
7

Mounika, G. "Closed Loop Reactive Power Compensation on a Single-Phase Transmission Line." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (June 20, 2021): 2156–59. http://dx.doi.org/10.22214/ijraset.2021.35489.

Full text
Abstract:
Zinc-aluminium alloys are alloys whose main ingredients stay zinc and aluminium. Other alloying elements clasp magnesium and copper .Zinc Aluminum Alloys over the past decayed are occupying attention of both researches and industries as a promising material for tribological applications. At this moment commercially available Zinc-Aluminium alloys and bearing bronzes due to good cost ability and unique combination of properties. They can also be deliberated as competing material for cast iron, plastics and even for steels. It has been shown that the addition of alloying elements including copper, silicon, magnesium, manganese and nickel can improve the mechanical and tribological properties of zinc aluminum alloys. This alloy has still found limited applications encompassing high stress conditions due to its lower creep resistance, compared to traditional aluminum alloys and other structural materials. This has resulted in major loss of market potential for those alloy otherwise it is excellent material. The aim of this paper is to measure the coefficient of friction and wear under different operating conditions for material with silicon content. Then wear equation will be found out for all the materials experimented under various conditions. In this paper there is discussion of the effect of Silicon on tribological properties of aluminium based Zinc alloy by experiment as well as Ansys software based and compares the same.
APA, Harvard, Vancouver, ISO, and other styles
8

Hung, Dao Quoc, Dũng Trần Thanh, Thắng Đinh Văn, Duy Huỳnh Nhật, and Lập Thượng Công. "Fabrication technology for aluminium-alloy tanks carrying petroleum and chemical substances in Viet Nam." Science & Technology Development Journal - Engineering and Technology 3, SI2 (April 15, 2021): first. http://dx.doi.org/10.32508/stdjet.v3isi2.568.

Full text
Abstract:
Compared to steels, aluminium-alloys are comparably strong but 3 times lighter, inoxidable and unfavorable to producing mechanical sparks. Aluminium alloys are therefore attractive materials and have been widely applied to transportation industry in developed countries since 1950s. An alunimium-alloy tank has upto 20% more useful volume than a steel tank for the same total weight. Interior and exterior protective coatings are unnecessary, significantly saving annual maintenance costs and preventing any contamination from abrasion of interior protective coatings. In additional, an aluminim-alloy tank does not ignite a fire in traffic accident. In G7 regions as well as many developed countries in Europe and Asia, only tanks made from aluminim alloys are approved for carrying danger liquids such as petroleum and chemical substances. In Vietnam, International Machine And Equipment (IMAE) Company is considered as a pioneer in designing and manufacturing aluminium alloy-tanks satisfying American DOT 406 Standard for tank trucks and semi-trailers. With optimized designing and manufacturing processes in conjunction with quality control system and continuous improvement, product quality is strictly maintained, quickly providing benefits to customers. Using an aluminium-alloy tank for carrying petroleum for 25 years, a complete payback can be achieved after only 7 months although initial investment is considerablely high.
APA, Harvard, Vancouver, ISO, and other styles
9

Wongpreedee, Kageeporn, Panphot Ruethaitananon, and Tawinun Isariyamateekun. "Interface Layers of Ag-Al Fusing Metals by Casting Processes." Advanced Materials Research 787 (September 2013): 341–45. http://dx.doi.org/10.4028/www.scientific.net/amr.787.341.

Full text
Abstract:
The materials of fusing metals commercially used in the jewelry niche marketing is seen as precious metals. An innovation of fusing metals searched for new materials to differentiate from the markets for mass production. In this research, it studied the bonding processes of silver and aluminium metals by casting processes for mass productions. The studies had been varied parameters on the types of aluminium and process temperature controls. This research had used two types of aluminium which were pure aluminium 99.99% and aluminum 5083 alloys bonding with pure silver 99.99%. The temperatures had been specified for two factors including casting temperature at X1, X2 and flasking temperature at Y1, Y2. From the results, it was found that the casting temperature at 730°C and the flasking temperature at 230 °C of pure silver-aluminum 5083 alloys bonding had the thinnest average thickness of interface at 427.29 μm. The microstructure of pure silver-aluminum 5083 alloy bonding was revealed eutectic-like structures at the interfaces. The EDS analysis showed the results of compounds at interface layers of Ag sides giving Ag2Al intermetallics on pure silver-aluminum 5083 alloy bonding unlike pure silver-pure aluminium bonding giving Ag3Al intermetallics.
APA, Harvard, Vancouver, ISO, and other styles
10

Mamala, A., and W. Sciężor. "Evaluation of the Effect of Selected Alloying Elements on the Mechanical and Electrical Aluminium Properties." Archives of Metallurgy and Materials 59, no. 1 (March 1, 2014): 413–17. http://dx.doi.org/10.2478/amm-2014-0069.

Full text
Abstract:
Abstract Modern industry expects aluminum products with new, unusual, and well-defined functional properties. Last years we are able to notice constant development of aluminium alloys. In food industry, power engineering, electrical engineering and building engineering, flat rolled products of 1XXX series aluminium alloys are used.8XXX series alloys registered in Aluminium Association during last 20 years may be used as an alternative. These alloys have very good thermal and electrical conductivity and perfect technological formability. Moreover, these materials are able to obtain by aluminium scrap recycling. Fundamental alloy additives of 8XXX series are Fe, Si, Mn, Mg, Cu and Zn. Aluminium alloying with these additives makes it possible to obtain materials with different mechanical ale electrical properties. In this paper, the analysis of alloy elements content (in 8XXX series) effect on chosen properties of material in as cast and after thermal treatment tempers has been presented.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Aluminium alloy"

1

Matthews, Stephen John. "Cavitation erosion of aluminium alloys, aluminium alloy/ceramic composites and ceramics." Thesis, Coventry University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.317927.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nafisi, Shahrooz. "Effects of grain refining and modification on the microstructural evolution of semi-solid 356 alloy = Effets de l'affinage des grains et de la modification sur l'évolution microstructurale de l'alliage 356 semi-solide /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Golbahar, Behnam. "Effect of grain refiner-modifier interaction on the performance of A356.2 alloy." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2008. http://theses.uqac.ca.

Full text
Abstract:
Thèse (M.Eng.) -- Université du Québec à Chicoutimi, 2008.
La p. de t. porte en outre: Mémoire présenté à l'Université du Québec à Chicoutimi comme exigence partielle de la maîtrise en ingénierie. CaQQUQ Comprend des réf. bibliogr. (f. 149-155). Publié aussi en version électronique. CaQQUQ
APA, Harvard, Vancouver, ISO, and other styles
4

Turner, Michael. "Brush plating of bearing alloys on aluminium alloy shells." Thesis, Aston University, 1986. http://publications.aston.ac.uk/11919/.

Full text
Abstract:
The turbocharging of diesel engines has led to increase in temperature, load and corrosive attack of plain bearings. To meet these requirements, overlay plated aluminium alloys are now preferred. Currently, lead-tin alloys are deposited using a zincate layer and nickel strike, as intermediate stages in the process. The nickel has undesirable seizure characteristics and the zincate can given rise to corrosion problems. Consequently, brush plating allows the possible elimination of these stages and a decrease in process together with greater automation. The effect of mode application, on the formation of zincate films, using film growth weight measurements, potential-time studies, peel adhesion testing and Scanning Electron Microscopy was studied, for both SIC and AS15 aluminium alloys. The direct plating of aluminium was also successfully achieved. The results obtained indicate that generally, although lower adhesion resulted when a brush technique was used, satisfactory adhesion for fatigue testing was achieved. Both lead-tin and tin-cobalt overlays were examined and a study of the parameters governing brush plating were carried out using various electrolytes. An experimentally developed small scale rig, was used to produce overlay plated bearings that were fatigue tested until failure. The bearings were then examined and an analysis of the failure mechanisms undertaken. The results indicated that both alloy systems are of the regular codeposition type. Tin-cobalt overlays were superior to conventional lead-tin overlays and remained in good condition, although the lining (substrate) failed. Brush plated lead-tin was unsatisfactory. Sufficient understanding has now been gained, to enable a larger scale automated plant to be produced. This will allow a further study of the technique to be carried out, on equipment that more closely resembles that of a full scale production process.
APA, Harvard, Vancouver, ISO, and other styles
5

Ghadimzadeh, Seyed Reza. "Machining of hypereutectic aluminium-silicon alloy." Thesis, Coventry University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.281726.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chayong, Sukangkana. "Thixoforming processing of aluminium 7075 alloy." Thesis, University of Sheffield, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251217.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Trejo, Eduardo. "Centrifugal casting of an aluminium alloy." Thesis, University of Birmingham, 2011. http://etheses.bham.ac.uk//id/eprint/3041/.

Full text
Abstract:
In centrifugal casting, molten metal is introduced into a mould which is rotated at high speed. The centrifugal force helps to fill thin sections but this benefit may be offset by the effect of the turbulent flow on the casting quality. In this research, the effect of direct and indirect gated mould designs on the quality and reliability of aluminium alloy investment castings made by centrifugal casting was investigated. The scatter in the ultimate bend strength and the modulus of elasticity was analyzed using the Weibull statistical technique, which showed that the Weibull modulus of both properties was significantly improved for the indirect gated cast test bars compared to the direct gated bars. A detailed microstructural characterization was carried out on the cast test bars, which included grain size, dendrite cell size and porosity. Scanning electron microscopy was used to examine and analyze the presence of defects on the fracture surfaces such as shrinkage pores, entrapped bubbles and oxide films resulting from surface turbulence during mould filling. The results indicated a clear correlation between the mechanical properties and the presence of casting defects. Water modelling experiments were carried out using purpose-built experimental centrifugal casting equipment and filling sequences recorded using a high speed video camera. The water modelling results showed that the general tendency for the direct and indirect gated mould designs was that the higher the rotational velocity, the lower the filling length and consequently the lower the filling rate. Subsequently, this information was used to validate the computer software ANSYS CFX. An excellent correlation was obtained between the experimental water modelling and simulation results for both direct and indirect gated moulds.
APA, Harvard, Vancouver, ISO, and other styles
8

Subramaniyan, Jaya. "Extrusion of 2024 aluminium alloy sections." Thesis, Imperial College London, 1989. http://hdl.handle.net/10044/1/47677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Garcia-Vergara, Sandra Judith. "Effects of alloy enrichment in the surface properties of aluminium alloys." Thesis, University of Manchester, 2004. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.507256.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Willis, T. C. "Melt spun Al alloy." Thesis, University of Oxford, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.354869.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Aluminium alloy"

1

S, Popel P., and Ėskin G. I, eds. Liquid metal processing: Applications to aluminium alloy production. London: Taylor & Francis, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Great Britain. Department of the Environment. Secretary of State's guidance - aluminium and aluminium alloy processes. London: H.M.S.O., 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Michael, Turner. Brush plating of bearing alloys on aluminium alloy shells. Birmingham: Aston University. Department of Mechanical and Production Engineering, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nosair, Shawky Ibrahim Mohamed. Fatigue crack growth in aluminium alloy structures. Salford: University of Salford, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cunliffe, Edward L. The minimal gating of aluminium alloy castings. Birmingham: University of Birmingham, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Baker, S. V. Atmospheric degradation of all aluminium alloy conductor. Manchester: UMIST, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ana Sofia Climaco Monteiro D'Oliveira. Superplastic forming an aluminium-lithium alloy AA8090. Birmingham: University of Birmingham, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Aluminium alloy corrosion of aircraft structures: Modelling and simulation. Southampton: WIT Press, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Phoplonker, Mohamed A. Stable crack growth in an aluminium-silicon bronze alloy. Portsmouth: PortsmouthPolytechnic, Dept. of Mechanical Engineering, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ashrafizadeh, S. Fakhreddin. Metallic and ceramic coatings on an aluminium-silicon alloy. Birmingham: University of Birmingham, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Aluminium alloy"

1

Watson, Keith. "Advances in On-Site Alloy Analysis and Identification." In Aluminium Cast House Technology, 356–57. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118806364.ch35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schneider, Wolfgang, and Paul Cooper. "Influence of AlTiB Master Alloy Type and Casting Conditions on Grain Refinement of Aluminium Alloys." In Aluminium Cast House Technology, 167–82. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118787304.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cook, R., I. T. H. Chang, and C. Lucien Falticeanu. "Aluminium and Aluminium Alloy Powders for P/M Applications." In Progress in Powder Metallurgy, 773–76. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.773.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ramesh, S., and V. Subburam. "Electrochemical Micromachining of Aluminium Alloy Composite." In Lecture Notes in Mechanical Engineering, 309–17. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6374-0_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Trumper, R., and V. Scott. "Cast Fibre Reinforced Aluminium Alloy Microstructures." In Developments in the Science and Technology of Composite Materials, 139–44. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1123-9_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Siddiqui, R. A. "Ageing Characteristics of 2024 Aluminium Alloy." In Proceedings of the Twenty-Ninth International Matador Conference, 381–87. London: Macmillan Education UK, 1992. http://dx.doi.org/10.1007/978-1-349-12433-6_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kapranos, Plato, Toshio Haga, Ermanno Bertoli, Annalisa Pola, Zigor Azpilgain, and Inaki Hurtado. "Thixo-Extrusion of 5182 Aluminium Alloy." In Solid State Phenomena, 115–20. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908451-59-0.115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Canullo, M. V., M. F. Jaitman Labaton, and R. Acuña Laje. "Cleanliness of Primary A356 Alloy: Interpretation and Standardisation of PODFA Laboratory Measurements." In Aluminium Cast House Technology, 341–55. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118787304.ch31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dobosy, Ádám, Marcell Gáspár, and Imre Török. "Resistance Spot Welding of 7075 Aluminium Alloy." In Lecture Notes in Mechanical Engineering, 679–93. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75677-6_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wan, Xinming, Xiao Zhi, Qingjiang Zhao, Guangyao Wang, and Xiaofei Xu. "Concept Analysis of Automotive Aluminium Alloy Bumper." In Lecture Notes in Electrical Engineering, 1089–99. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33738-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aluminium alloy"

1

Galindo, E., M. Maric, A. Avalos Postigo, A. Walker, M. Conlon, K. Azari, and M. Brochu. "Metal Fused Filament Fabrication of AlSi10Mg Aluminum Alloy." In International Aluminium Conference. Basel Switzerland: MDPI, 2023. http://dx.doi.org/10.3390/engproc2023043037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tinguery, Kenza Marianne Sipereh, Ahmed Rahem, François Nadeau, and Mario Fafard. "Friction Stir Welding Parameters Development of AA6061-T6 Extruded Alloy Using a Bobbin Tool." In International Aluminium Conference. Basel Switzerland: MDPI, 2023. http://dx.doi.org/10.3390/engproc2023043050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Usami, T., C. L. Wang, and J. Funayama. "Developing High-Performance Aluminium Alloy Seismic Dampers." In 7th International Conference on Steel and Aluminium Structures. Singapore: Research Publishing Services, 2011. http://dx.doi.org/10.3850/978-981-08-9247-0_rp076-icsas11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Iyota, Muneyoshi, Takuya Hamaguchi, and Yuto Koga. "Dissimilar Joining of High-Strength Steel and Aluminum Alloy Using Resistance Spot Welding with Die- and Punch-Shaped Electrodes." In International Aluminium Conference. Basel Switzerland: MDPI, 2023. http://dx.doi.org/10.3390/engproc2023043045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Okon, P., G. Dearden, K. Watkins, M. Sharp, and P. French. "Laser welding of aluminium alloy 5083." In ICALEO® 2002: 21st International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2002. http://dx.doi.org/10.2351/1.5065620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Theron, M., H. P. Burger, C. Van Rooyen, and L. H. lvanchev. "Laser welding of A357 aluminium alloy." In ICALEO® 2008: 27th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2008. http://dx.doi.org/10.2351/1.5061427.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Santo, L., F. Trovalusci, and V. Tagliaferri. "Hot Drilling of 6082 Aluminium Alloy." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95486.

Full text
Abstract:
In traditional machining drilling is a major and common holemaking process in which lubrication and cooling are very important to improve the machining. The idea proposed in this paper regards the metal heating during the drilling operation by means of an infrared lamp. In this way a reduction in thrust force and torque is expected, since the material properties have been changed. Some experimental tests are carried out on Al 6082 in dry drilling operation, using a conventional milling machine and cobalt-coated HSS twist drills 2.5, 5, 7 mm in diameter. The spindle speeds range from 5000 to 15000 Rpm, the feeds range between 0.0076–0.042 mm/rev, the temperature is varied in the range of 40–140°C. Besides, Flat-top cylinder Indenter for Mechanical Characterization (FIMEC) tests for material characterization are carried out to obtain the yield stress of material varying temperature. The main result is a significant reduction of the thrust force (from 10 to 34% depending on the process conditions). By analysing the data of forces as a function of temperature, a minimum value of force is always found in correspondence of a temperature depending on drill diameter and feed. The influence of each parameter is investigated. The experimental data in terms of force are also correlated to the measured yield stresses to study the influence of material properties on drilling machining. Further study must be developed to investigate the torque, the mechanisms of chip formation and the tool wear.
APA, Harvard, Vancouver, ISO, and other styles
8

Legge, R. A., D. M. Smith, and G. Henkel. "Improved Aluminium Alloy for Engine Applications." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1986. http://dx.doi.org/10.4271/860558.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sathish, R., D. Ananthapadmanaban, G. S. Nixon, and V. Harish. "Friction weldability of 7075 aluminium alloy." In 2010 Recent Advances in Space Technology Services and Climate Change (RSTSCC). IEEE, 2010. http://dx.doi.org/10.1109/rstscc.2010.5712849.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ji Ze Sheng and Hu Mao Liang. "Magnesium alloy and aluminium alloy fabricated by solid recycling process." In 2013 8th International Forum on Strategic Technology (IFOST). IEEE, 2013. http://dx.doi.org/10.1109/ifost.2013.6616961.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Aluminium alloy"

1

HUYNH, Le Anh Thi, Cao Hung PHAM, and Kim J. R. RASMUSSEN. EXPERIMENTAL INVESTIGATION OF COLD-ROLLED ALUMINIUM ALLOY 5052-H36 BEAMS UNDERGOING LOCAL BUCKLING. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pham, Ngoc Hieu, Cao Hung Pham, and Kim J. R. Rasmussen. EXPERIMENTAL INVESTIGATION OF THE MEMBER BUCKLING OF COLD-ROLLED ALUMINIUM ALLOY 5052 CHANNEL COLUMNS. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bouzekova-Penkova, Anns, Silvia Simeonova, Rositza Dimitrova, and Rayna Dimitrova. Structural Properties of Aluminium Alloy Enhanced by Nanodiamond and Tungsten Exposed in the Outer Space. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, September 2020. http://dx.doi.org/10.7546/crabs.2020.09.11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bouzekova-Penkova, Anna, and Yordan Mirchev. Destructive and Nondestructive Testing of the Mechanical Properties of Aluminium Alloy Enhanced by Nanodiamond and Tungsten Exposed in the Outer Space. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, April 2020. http://dx.doi.org/10.7546/crabs.2020.04.14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, C. T., V. K. Sikka, and C. G. McKamey. Alloy development of FeAl aluminide alloys for structural use in corrosive environments. Office of Scientific and Technical Information (OSTI), February 1993. http://dx.doi.org/10.2172/10162479.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, C. T., V. K. Sikka, and C. G. McKamey. Alloy development of FeAl aluminide alloys for structural use in corrosive environments. Office of Scientific and Technical Information (OSTI), February 1993. http://dx.doi.org/10.2172/6136151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sikka, V. K., C. R. Howell, F. Hall, and J. Valykeo. Part A - low-aluminum-content iron-aluminum alloys. Part B - commercial-scale melting and processing of FAPY alloy. Office of Scientific and Technical Information (OSTI), June 1996. http://dx.doi.org/10.2172/450763.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Minnicino, Michael, David Gray, and Paul Moy. Aluminum Alloy 7068 Mechanical Characterization. Fort Belvoir, VA: Defense Technical Information Center, August 2009. http://dx.doi.org/10.21236/ada506416.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, C. T., V. K. Sikka, J. A. Horton, and E. H. Lee. Alloy development and mechanical properties of nickel aluminide (Ni sub 3 Al) alloys. Office of Scientific and Technical Information (OSTI), August 1988. http://dx.doi.org/10.2172/7021947.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Purtscher, P. T., M. Austin, S. Kim, and D. Rule. Aluminum-lithium alloys :. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.3986.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aluminium alloy' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography