Academic literature on the topic 'Alloy blend'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Alloy blend.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Alloy blend"
Jiang, Shui Qing. "Preparation of PMMA/PP/ PP-g-MAH Alloy." Advanced Materials Research 1061-1062 (December 2014): 30–34. http://dx.doi.org/10.4028/www.scientific.net/amr.1061-1062.30.
Full textGreen, Peter F., and Edward J. Kramer. "Diffusion in Polymer Alloy Melts." MRS Bulletin 12, no. 8 (December 1987): 42–47. http://dx.doi.org/10.1557/s0883769400066744.
Full textStrauch, Anna Luise, Volker Uhlenwinkel, Matthias Steinbacher, Felix Großwendt, Arne Röttger, Abootorab Baqerzadeh Chehreh, Frank Walther, and Rainer Fechte-Heinen. "Comparison of the Processability and Influence on the Microstructure of Different Starting Powder Blends for Laser Powder Bed Fusion of a Fe3.5Si1.5C Alloy." Metals 11, no. 7 (July 12, 2021): 1107. http://dx.doi.org/10.3390/met11071107.
Full textM. Maruthi Rao and NVVS Sudheer. "Experimental investigation of heat treated alloy for hardness using multiple linear regression model." Open Journal of Science and Technology 5, no. 1 (October 10, 2022): 1–6. http://dx.doi.org/10.31580/ojst.v4i4.1683.
Full textSAKANO, Hajime, Hiromichi AOKI, Hideki YAMAGUCHI, and Yasunobu TAKAGAWA. "Alloy Blend Composites. Weld Strength and Phase Structure of ABS/PBT Alloy." Seikei-Kakou 9, no. 6 (1997): 404–8. http://dx.doi.org/10.4325/seikeikakou.9.404.
Full textSAKANO, Hajime, Takayoshi FUJIWARA, Kiyoshi OGURA, and Masato YANO. "Alloy Blend Composites. Weld Strength and Phase Structure of ABS/PA6 Alloy." Seikei-Kakou 9, no. 6 (1997): 409–13. http://dx.doi.org/10.4325/seikeikakou.9.409.
Full textRamosena, Lekhetho Ambition, Thywill Cephas Dzogbewu, and Willie du Preez. "Direct Metal Laser Sintering of the Ti6Al4V Alloy from a Powder Blend." Materials 15, no. 22 (November 18, 2022): 8193. http://dx.doi.org/10.3390/ma15228193.
Full textGopi, Jineesh Ayippadath, and Golok Bihari Nando. "REACTIVE COMPATIBILIZATION OF THE BLENDS OF THERMOPLASTIC POLYURETHANE AND POLYDIMETHYLSILOXANE RUBBER." Rubber Chemistry and Technology 88, no. 4 (December 1, 2015): 584–603. http://dx.doi.org/10.5254/rct.15.84885.
Full textHORIUCHI, Toru, Hideki YAMANE, Masaoki TAKAHASHI, and Tatsuki MATSUO. "Alloy Blend Composites. Effects of Wear Morphology on Tribological Properties of Polyamide 6/Polyolefin Blends." Seikei-Kakou 9, no. 6 (1997): 425–33. http://dx.doi.org/10.4325/seikeikakou.9.425.
Full textLuo, Yi Fei, Yue Huang Xie, Jia Miao Liang, and De Liang Zhang. "Preparation, Microstructure and Properties of Ti-6Al-4V Rods by Powder Compact Extrusion of TiH2/Al60V40 Powder Mixture." Key Engineering Materials 770 (May 2018): 116–25. http://dx.doi.org/10.4028/www.scientific.net/kem.770.116.
Full textDissertations / Theses on the topic "Alloy blend"
Bandeira, Rafael Marinho. "Estudos da proteção à corrosão da liga de alumínio AA7075-T6 por revestimentos a base de polianilina." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/75/75134/tde-29092017-174148/.
Full textIn this study, an aluminum alloy (AA7075-T6) was coated with polyaniline (PANI) and polyaniline/polyvinyl chloride (PANI/PVC in 1:1 ratio by mass) blend coatings of different thickness. These coatings were evaluated for their ability to protect the aluminum alloy against corrosion. For studying the corrosion of aluminum alloy in saline environment, a 3.5% NaCl solution was used in all the corrosion tests. The thickness of PANI-based films was varied between 5 to 35 µm and the effect of film thickness, roughness and hydrophobicity on the corrosion protection properties of the coatings was evaluated. The coatings with thickness between 12 and 23 µm exhibited lower roughness, higher contact angles and better corrosion protection as confirmed by electrochemical measurements such as electrochemical impedance spectroscopy and linear polarization. Morphological analysis by scanning electron microscopy confirmed that the PANI coatings are homogeneous and present almost no defects upon exposure to the corrosive environment. Compared to pure PANI coatings, the coatings consisting of PANI/PVC blend presented better performance against corrosion. Electrochemical impedance spectroscopy and linear polarization measurements showed that the blends have high polarization resistance with stable corrosion potentials that are shifted to the anodic region for the electrodes with thicker coatings (26.3 ± 0.9 µm). Surface analysis by scanning electron microscopy, atomic force microscopy and elemental analysis by energy-dispersive X-ray spectroscopy were used to gather information that helped understanding the better corrosion resistance of PANI/PVC coatings.
BOSIO, FEDERICO. "Laser Powder Bed Fusion of AlSi10Mg+4Cu and AlSi10Mg alloys." Doctoral thesis, Politecnico di Torino, 2021. http://hdl.handle.net/11583/2898034.
Full textBergamini, Paula Aparecida. "Reciclagem de policarbonato por meio da composição de blendas de ABS/PC." Universidade Presbiteriana Mackenzie, 2015. http://tede.mackenzie.br/jspui/handle/tede/1360.
Full textThis study proposes the production and characterization of blends of ABS/PC through reuse of discarded PC in the automotive panel production process. The developed alloy ratios are (ABS/PC) 30/70, 50/50 and 70/30, in addition to the neat materials. For comparative purposes the mixtures were developed for both materials recycled PC (PCr) and neat PC (PCn). The blends were processed in a twin screw extruder under controled heating temperature.
Este estudo propõe a produção e caracterização de blendas de ABS/PC por meio do reuso do policarbonato (PC) descartado no processo de produção de painéis automotivos. As proporções de mistura desenvolvidas para estudo foram (ABS/PC) 30/70, 50/50 e 70/30, além dos materiais puros. Para efeitos comparativos, as misturas foram desenvolvidas tanto com o PC reciclado (PCr) como com o PC natural (PCn). As blendas foram processadas em extrusora de dupla rosca, sob temperatura controlada.
Shi, Min. "Growth of AlInN and zinc blende GaN by molecular beam epitaxy." Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B39558873.
Full textShi, Min, and 施敏. "Growth of AlInN and zinc blende GaN by molecular beam epitaxy." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B39558873.
Full textNilsson, Christine. "Article 7 TEU : A Human Rights Defender or a Political Blind Alley?" Thesis, Uppsala universitet, Juridiska institutionen, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-200435.
Full textFarrell, Michael P. "Polymer blends formed by the solid state mechanical alloying process." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-12042009-020316/.
Full textBowden, Roy Edward. "The problems of boy labour and blind-alley occupations within the context of the labour markets of Brighton and Portsmouth, 1870-1939." Thesis, University of Southampton, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.242578.
Full textАбдулкеримов, Илимдар Диляверович. "Технологическое обеспечение качества резьбовых соединений в глухих отверстиях деталей из алюминиевых сплавов деформирующим инструментом." Thesis, НТУ "ХПІ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/20297.
Full textThe thesis for the degree of candidate of technical sciences, specialty 05.02.08 - technology of mechanical engineering. National Technical University "Kharkiv Polytechnic Institute", Kharkov, 2016. The dissertation is devoted to the processing to ensure the tightness of threaded connections of details from aluminum alloys deformed gas shrinkage porosity tool. Analytical and experimental research method of machining of the threaded holes in applying deforming tools based modeling of the process of forming a trumpet groove in blind holes deforming tool. Theoretically grounded possibility of the surface layer of quality blind holes after PPD alloy AK12M2. The new design tools and practical advice on selecting treatment regimes that ensure maximum processing efficiency deaf threaded holes. The economic effect of the introduction of the main provisions of the production of 18,207.44 UA.
Абдулкерімов, Ілімдар Діляверович. "Технологічне забезпечення якості різьбових з'єднань у глухих отворах деталей з алюмінієвих сплавів деформуючим інструментом." Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/20295.
Full textThe thesis for the degree of candidate of technical sciences, specialty 05.02.08 - technology of mechanical engineering. National Technical University "Kharkiv Polytechnic Institute", Kharkov, 2016. The dissertation is devoted to the processing to ensure the tightness of threaded connections of details from aluminum alloys deformed gas shrinkage porosity tool. Analytical and experimental research method of machining of the threaded holes in applying deforming tools based modeling of the process of forming a trumpet groove in blind holes deforming tool. Theoretically grounded possibility of the surface layer of quality blind holes after PPD alloy AK12M2. The new design tools and practical advice on selecting treatment regimes that ensure maximum processing efficiency deaf threaded holes. The economic effect of the introduction of the main provisions of the production of 18,207.44 UA.
Books on the topic "Alloy blend"
Blind alley. New York: Bantam Books, 2005.
Find full textJohansen, Iris. Blind alley. New York: Bantam Books, 2004.
Find full textJohansen, Iris. Blind alley. New York: Random House Large Print, 2004.
Find full textBlind alley. New York: Bantam Books, 2004.
Find full textJohansen, Iris. Blind Alley. New York: Random House Publishing Group, 2004.
Find full textPeacock, Justin. Blind man's alley. New York: Doubleday, 2010.
Find full textPeacock, Justin. Blind man's alley. New York: Pocket Black Lizard, 2011.
Find full textBlind man's alley. New York: Doubleday, 2010.
Find full textPeacock, Justin. Blind man's alley. New York: Doubleday, 2010.
Find full textFolkes, M. J., and P. S. Hope, eds. Polymer Blends and Alloys. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0.
Full textBook chapters on the topic "Alloy blend"
Hourston, D. J. "Alloys and Blends." In Polymer Science and Technology Series, 20–22. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-015-9231-4_5.
Full textVesely, D. "Practical techniques for studying blend microstructure." In Polymer Blends and Alloys, 103–25. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_5.
Full textKamal, Musa R., Leszek A. Utracki, and A. Mirzadeh. "Rheology of Polymer Alloys and Blends." In Polymer Blends Handbook, 725–873. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-6064-6_9.
Full textScobbo, J. J., and Lloyd A. Goettler. "Applications of Polymer Alloys and Blends." In Polymer Blends Handbook, 951–76. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/0-306-48244-4_13.
Full textHope, P. S., and M. J. Folkes. "Introduction." In Polymer Blends and Alloys, 1–6. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_1.
Full textCurry, J. E. "Practical aspects of processing of blends." In Polymer Blends and Alloys, 7–45. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_2.
Full textBonner, J. G., and P. S. Hope. "Compatibilisation and reactive blending." In Polymer Blends and Alloys, 46–74. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_3.
Full textLyngaae-Jørgensen, J. "Rheology of polymer blends." In Polymer Blends and Alloys, 75–102. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_4.
Full textArridge, R. G. C. "Theoretical aspects of polymer blends and alloys." In Polymer Blends and Alloys, 126–62. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_6.
Full textLee, W. H. "Toughened polymers." In Polymer Blends and Alloys, 163–94. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2162-0_7.
Full textConference papers on the topic "Alloy blend"
Kakadjian, Sarkis, Keith Korhonen, Marvin Solomon, Jarrett Kitchen, Amanuel Gebrekirstos, Jesse Risner, and Otman Algadi. "Effective Water Treatment in the Permian and Marcellus Shales to Mitigate Surface Equipment Failures." In SPE Annual Technical Conference and Exhibition. SPE, 2022. http://dx.doi.org/10.2118/210250-ms.
Full textEz-Zaki, Hamza, Frederic Christien, Cédric Bosch, Laurent Briottet, Maxime Bertin, Olivier Levasseur, and Alain Leriverain. "Effect of Hydrogen Content in Natural Gas Blend on the Mechanical Properties of a L485-MB Low-Alloyed Steel." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21228.
Full textDellaCorte, C. "Nickel-Titanium Alloys for Oil-Lubricated Bearing and Mechanical Component Applications." In ASME/STLE 2009 International Joint Tribology Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/ijtc2009-15055.
Full textKovářÍk, Ondřej, Jaroslav Čech, Jan Cizek, Jakub Klečka, and Michal Hajíček. "Mechanical and Fatigue Properties of Tungsten Heavy Alloy Prepared by RF-Plasma." In ITSC2021, edited by F. Azarmi, X. Chen, J. Cizek, C. Cojocaru, B. Jodoin, H. Koivuluoto, Y. C. Lau, et al. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.itsc2021p0115.
Full textKuppuswamy, Ramesh, Deon Bower, and Poloko March. "Effect of Ball Nose End Mill Geometry on High Speed Machining of Ti6Al4V." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1041.
Full textDenman, Bradley M., Jeffrey D. Munzar, and Jeffrey M. Bergthorson. "An Experimental and Numerical Study of the Laminar Flame Speed of Jet Fuel Surrogate Blends." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-69917.
Full textDay, W. David, Stephen W. Fiebiger, and Hitesh N. Patel. "Parametric Evaluation of Compressor Blade Blending." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-68641.
Full textHodder, Kevin, Adrian Gerlich, Julio Villafuerte, and André McDonald. "Fabrication of Aluminum-Alumina Metal Matrix Composite Coatings Via Cold Gas Dynamic Spraying at Low Pressure Followed by Friction-Stir Processing." In ITSC 2012, edited by R. S. Lima, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, A. McDonald, and F. L. Toma. ASM International, 2012. http://dx.doi.org/10.31399/asm.cp.itsc2012p0231.
Full textBurgess, Austin Tyler, Colin Hosli, and Kevin Whittaker. "A Return to Production: Subsea Packer Leak Remediation with Pressure-Activated Sealant." In SPE 2022 Symposium Compilation. SPE, 2022. http://dx.doi.org/10.2118/210607-ms.
Full textThien, B., K. Annamalai, and J. Sweeten. "Co-Firing Feedlot and Litter Biomass: Coal Blends in a Laboratory Scale Boiler Burner." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33999.
Full textReports on the topic "Alloy blend"
Szołtysek, Mikołaj. Spatial construction of European family and household systems: a promising path or a blind alley? An Eastern European perspective. Rostock: Max Planck Institute for Demographic Research, December 2011. http://dx.doi.org/10.4054/mpidr-wp-2011-021.
Full text