Academic literature on the topic 'Alloy additive'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Alloy additive.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Alloy additive"
Gneiger, Stefan, Johannes A. Österreicher, Aurel R. Arnoldt, Alois Birgmann, and Martin Fehlbier. "Development of a High Strength Magnesium Alloy for Wire Arc Additive Manufacturing." Metals 10, no. 6 (June 10, 2020): 778. http://dx.doi.org/10.3390/met10060778.
Full textWen, Shifeng, Jie Gan, Fei Li, Yan Zhou, Chunze Yan, and Yusheng Shi. "Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys." Materials 14, no. 16 (August 11, 2021): 4496. http://dx.doi.org/10.3390/ma14164496.
Full textWahlmann, Benjamin, Dominik Leidel, Matthias Markl, and Carolin Körner. "Numerical Alloy Development for Additive Manufacturing towards Reduced Cracking Susceptibility." Crystals 11, no. 8 (July 31, 2021): 902. http://dx.doi.org/10.3390/cryst11080902.
Full textHussein, Suhair G., Adnan N. Abood, and Nabeel Kadim Abdel Sahib. "Effect of SiC Powder Additive on Mechanical Properties of Al-Pb Alloy Produced by Mechanical Alloying." Al-Nahrain Journal for Engineering Sciences 21, no. 3 (September 1, 2018): 389–92. http://dx.doi.org/10.29194/njes.21030389.
Full textAsmael, M. B. A., Roslee Ahmad, Ali Ourdjini, and S. Farahany. "Effect of Elements Cerium and Lanthanum on Eutectic Solidification of Al-Si-Cu near Eutectic Cast Alloy." Advanced Materials Research 845 (December 2013): 118–22. http://dx.doi.org/10.4028/www.scientific.net/amr.845.118.
Full textPrashanth, Konda Gokuldoss, and Zhi Wang. "Additive Manufacturing: Alloy Design and Process Innovations." Materials 13, no. 3 (January 23, 2020): 542. http://dx.doi.org/10.3390/ma13030542.
Full textLiu, Shunyu, and Yung C. Shin. "Additive manufacturing of Ti6Al4V alloy: A review." Materials & Design 164 (February 2019): 107552. http://dx.doi.org/10.1016/j.matdes.2018.107552.
Full textKnoll, Helene, Sörn Ocylok, Andreas Weisheit, Hauke Springer, Eric Jägle, and Dierk Raabe. "Combinatorial Alloy Design by Laser Additive Manufacturing." steel research international 88, no. 8 (December 19, 2016): 1600416. http://dx.doi.org/10.1002/srin.201600416.
Full textLindwall, Greta, and Wei Xiong. "CALPHAD-Based Methods for Alloy Additive Manufacturing." Journal of Phase Equilibria and Diffusion 42, no. 1 (February 2021): 3–4. http://dx.doi.org/10.1007/s11669-021-00870-4.
Full textLangelandsvik, Geir, Odd M. Akselsen, Trond Furu, and Hans J. Roven. "Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing." Materials 14, no. 18 (September 17, 2021): 5370. http://dx.doi.org/10.3390/ma14185370.
Full textDissertations / Theses on the topic "Alloy additive"
Palanivel, Sivanesh. "Thermomechanical Processing, Additive Manufacturing and Alloy Design of High Strength Mg Alloys." Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc849628/.
Full textPuleo, Shawn Michael. "Additive Friction Stir Manufacturing of 7055 Aluminum Alloy." ScholarWorks@UNO, 2016. http://scholarworks.uno.edu/honors_theses/75.
Full textKumara, Chamara. "Microstructure Modelling of Additive Manufacturing of Alloy 718." Licentiate thesis, Högskolan Väst, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-13197.
Full textCao, Pengcheng. "Characterization of Laser Deposited Alloy 718." Thesis, KTH, Materialvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-182603.
Full textWang, Xueyuan. "Predicting fatigue crack growth life in additive manufactured titanium alloy." Thesis, Coventry University, 2016. http://curve.coventry.ac.uk/open/items/723714e9-2b61-4464-b6b9-a9c05a0a74b0/1.
Full textMikler, Calvin. "Laser Additive Manufacturing of Magnetic Materials." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1011873/.
Full textAboulkhair, Nesma T. "Additive manufacture of an aluminium alloy : processing, microstructure, and mechanical properties." Thesis, University of Nottingham, 2016. http://eprints.nottingham.ac.uk/31152/.
Full textGavelius, Marianne, and Karin Andersson. "Surface Treatment for Additive Manufactured Aluminum Alloys." Thesis, Linköpings universitet, Molekylär ytfysik och nanovetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-169027.
Full textSheridan, Luke Charles. "An Adapted Approach to ProcessMapping Across Alloy Systems and Additive Manufacturing Processes." Wright State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=wright1471861921.
Full textTollander, Sofia, and Mona Kouach. "Repeatability of Additive Manufactured Parts." Thesis, KTH, Materialvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209804.
Full textSaab Surveillance i Järfä̈lla konstruerar komplexa försvarsprodukter som till exempel radarsystem. Additiv tillverkning i metall möjliggör tillverkning av produkter med hög komplexitet, men då tillverkningsprocessen är relativt ny i industrin finns det en stor osäkerhet kring processen. Syftet med detta kandidatexamensarbete var att få en bättre förståelse för repeterbarheten hos additivt tillverkade delar samt att jämföra additivt tillverkade provstavar konstruerade i två olika riktningar, horisontellt och vertikalt, med svarvade provstavar med hjälp av ett vibrationstest. Vibrationstestet genomfördes för att simulera den operativa miljön där de additivt tillverkade detaljerna skulle kunna implementeras i framtiden. Innan vibrationstestet kunde utföras simulerades provstavarnas design i en mjukvara för 3D-modellering. En finit element-analys utfördes även fö̈r att få en egenfrekvens inom intervallet 100 - 200 Hz och en maximal böjspänning mellan 60 - 80 MPa i anvisningen på provstaven. Slutsatsen drogs att de traditionellt bearbetade stavarna hade den högsta repeterbarheten. De horisontellt additivt tillverkade stavarna hade högre repeterbarhet än de vertikalt additivt tillverkade stavarna, men att de vertikalt additivt tillverkade stavarna hade ett längre utmattningsliv. Det kunde även konstateras att fler studier inom ämnet behövs för att kunna säkerställa repeterbarheten hos additivt tillverkade delar utan att behöva kompromissa med hållfastheten.
Books on the topic "Alloy additive"
Dunning, J. S. Effect of aluminum additives on sulfidation resistance of some Fe-Cr-Ni alloys. Washington, DC: Dept. of the Interior, 1989.
Find full textDunning, J. S. Effects of Al additions on sulfidation resistance of some Fe-Cr-Ni alloys. Washington, D.C: Bureau of Mines, U.S. Dept. of the Interior, 1989.
Find full textGarga. Effect of Hf-rich particles on the creep life of a high-strength NiAl single crystal alloy. [Washington, D.C: National Aeronautics and Space Administration, 1995.
Find full textPeter, Rudling, and Kammenzind Bruce, eds. Zirconium in the nuclear industry: Fourteenth international symposium. West Conshohocken, Pa: ASTM, 2006.
Find full textK, Kokula Krshina Hari, ed. Effects of Combined Addition of Aluminum Oxide, Fly Ash, Carbon and Yttrium on Density and Hardness of ZA27 Zinc Alloy: ICIEMS 2014. India: Association of Scientists, Developers and Faculties, 2014.
Find full textGOVERNMENT, US. An Act to Allow the National Park Service to Acquire Certain Land for Addition to the Wilderness Battlefield in Virginia, as Previously Authorized by Law, by Purchase or Exchange as Well as by Donation. [Washington, D.C: U.S. G.P.O., 1999.
Find full textPetrantoni, Giuseppe. Corpus of Nabataean Aramaic-Greek Inscriptions. Venice: Fondazione Università Ca’ Foscari, 2021. http://dx.doi.org/10.30687/978-88-6969-507-0.
Full textKuznecov, Sergey, and Konstantin Rogozin. All of physics on your palm. Interactive reference. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/501810.
Full textAdditive Manufacturing of Titanium Alloys. Elsevier, 2016. http://dx.doi.org/10.1016/c2015-0-02470-4.
Full textAdditive Manufacturing (AM) of Metallic Alloys. MDPI, 2020. http://dx.doi.org/10.3390/books978-3-03943-141-0.
Full textBook chapters on the topic "Alloy additive"
Yin, Shuo, and Rocco Lupoi. "Cold Sprayed Metallic Glass and High Entropy Alloy Deposits." In Springer Tracts in Additive Manufacturing, 153–65. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-73367-4_8.
Full textHoyer, K. P., and M. Schaper. "Alloy Design for Biomedical Applications in Additive Manufacturing." In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 475–84. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05861-6_44.
Full textSundarraj, Suresh, Sion Pickard, Alonso Peralta, Anil Chaudhary, David Snyder, Jeff W. Doak, Suraj Rawal, et al. "ICME Based Additive Manufacturing of Alloy 230 Components." In Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, 133–46. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-89480-5_7.
Full textMishra, Ashish Kumar, and Arvind Kumar. "Modelling of SLM Additive Manufacturing for Magnesium Alloy." In Lecture Notes on Multidisciplinary Industrial Engineering, 123–40. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8767-7_5.
Full textGiri, N., G. S. Brar, and A. S. Shahi. "Investigation of Mechanical Properties in Friction Stir Welded Mg AZ 31 Alloy Workpieces." In Additive, Subtractive, and Hybrid Technologies, 89–99. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99569-0_7.
Full textSheridan, Luke, Bo Whip, and Joy Gockel. "Primary Processing Parameter Effects on Defects and Fatigue in Alloy 718." In Structural Integrity of Additive Manufactured Parts, 450–64. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2020. http://dx.doi.org/10.1520/stp162020180092.
Full textSahu, Anshuman Kumar, and Siba Sankar Mahapatra. "Optimization of Electrical Discharge Machining of Titanium Alloy (Ti6Al4V) by Grey Relational Analysis Based Firefly Algorithm." In Additive Manufacturing of Emerging Materials, 29–53. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91713-9_2.
Full textWithers, J. C., R. O. Loutfy, and S. M. Pickard. "Additive Manufacturing to Produce Standard and Custom Alloy Titanium." In Proceedings of the 13th World Conference on Titanium, 1413–16. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119296126.ch238.
Full textWithers, James C., and Sion M. Pickard. "Additive Manufacturing to Produce Standard and Custom Alloy Titanium." In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings, 81–89. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51493-2_9.
Full textSadeghimeresht, Esmaeil, Paria Karimi, Pimin Zhang, Ru Peng, Joel Andersson, Lars Pejryd, and Shrikant Joshi. "Isothermal Oxidation Behavior of EBM-Additive Manufactured Alloy 718." In Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, 219–40. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-89480-5_13.
Full textConference papers on the topic "Alloy additive"
Shuai, Li, Wei Qingsong, D. Q. Zhang, and Chua Chee Kai. "Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting." In 1st International Conference on Progress in Additive Manufacturing. Singapore: Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-0446-3_021.
Full textWĘGLOWSKI, Marek Stanisław, Sylwester BŁACHA, Krzysztof KWIECIŃSKI, Piotr ŚLIWIŃSKI, Jan DUTKIEWICZ, and Łukasz ROGAL. "electron beam additive manufacturing of Ni-Ti alloy." In METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3619.
Full textLoh, L. E., C. K. Chua, Z. H. Liu, D. Q. Zhang, S. L. Sing, and M. Mapar. "A Numerical Study on the Melt Track in Selective Laser Melting Using Aluminium Alloy 6061." In 1st International Conference on Progress in Additive Manufacturing. Singapore: Research Publishing Services, 2014. http://dx.doi.org/10.3850/978-981-09-0446-3_028.
Full textZhang, Wenjing, Ning Wang, Tao Hang, and Ming Li. "Electroless deposition of copper alloy in the PEG additive." In 2015 16th International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2015. http://dx.doi.org/10.1109/icept.2015.7236832.
Full textMireles, Omar, Omar Rodriguez, Youping Gao, and Noah Philips. "Additive Manufacture of Refractory Alloy C103 for Propulsion Applications." In AIAA Propulsion and Energy 2020 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2020. http://dx.doi.org/10.2514/6.2020-3500.
Full textSartor, Tiago, Jorge Vicente Lopes Da Silva, Reyolando Lopes Rebello Da Fonseca Brasil, and Rafael Celeghini Santiago. "Characterization of Titanium Alloy (Ti6Al4V) Obtained by Additive Manufacturing." In 2019 SAE Brasil Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2020. http://dx.doi.org/10.4271/2019-36-0112.
Full textGaur, Bhanupratap, Rupesh Ghyar, and Bhallamudi Ravi. "Additive Manufacturing Process Parameter Optimization for Titanium-Alloy Orthopedic Implants." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70436.
Full textRawal, Suraj, James Brantley, and Nafiz Karabudak. "Additive manufacturing of Ti-6Al-4V alloy components for spacecraft applications." In 2013 6th International Conference on Recent Advances in Space Technologies (RAST). IEEE, 2013. http://dx.doi.org/10.1109/rast.2013.6581260.
Full textGuo, Xuejia, Shengye Huang, Ping Song, Yiming Li, Junhao Liu, and Meihong Guo. "Additive manufacturing of copper alloy and its application in Munroe effects." In Conference on Advanced Laser Technology and Application, edited by Pu Zhou, Xuechun Lin, Yangjian Cai, Yongzhen Huang, Jian Zhang, Cunlin Zhang, Zhiyi Wei, et al. SPIE, 2020. http://dx.doi.org/10.1117/12.2580011.
Full textDeutchman, H., M. Enright, J. Gong, J. McFarland, J. Neumann, G. Olson, A. Peralta, J. Sebastian, and D. Snyder. "Integrated Thermal Process Optimization of Alloy 718Plus® for Additive Manufacturing." In Superalloys 2016. The Minerals, Metals & Materials Society, 2016. http://dx.doi.org/10.7449/superalloys/2016/superalloys_2016_1031_1040.
Full textReports on the topic "Alloy additive"
Wu, A. S., G. F. Gallegos, M. W. Wraith, S. C. Burke, J. W. Elmer, D. W. Brown, B. Clausen, et al. Additive Manufacturing of a y0-Tetragonal Uranium-Niobium Alloy. Office of Scientific and Technical Information (OSTI), August 2018. http://dx.doi.org/10.2172/1466113.
Full textAllen, Jeffrey, Robert Moser, Zackery McClelland, Md Mohaiminul Islam, and Ling Liu. Phase-field modeling of nonequilibrium solidification processes in additive manufacturing. Engineer Research and Development Center (U.S.), December 2021. http://dx.doi.org/10.21079/11681/42605.
Full textRodriguez, Salvador, Andrew Kustas, and Graham Monroe. Metal Alloy and RHEA Additive Manufacturing for Nuclear Energy and Aerospace Applications. Office of Scientific and Technical Information (OSTI), July 2020. http://dx.doi.org/10.2172/1644167.
Full textMatthes, Melissa. CHARACTERIZATION OF IMPACT PROPERTIES OF FORGED, LAYERED, AND ADDITIVE MANUFACTURED TITANIUM ALLOY. Office of Scientific and Technical Information (OSTI), August 2016. http://dx.doi.org/10.2172/1755201.
Full textAnderson, Iver, and John Siemon. Specific Adaptation of Gas Atomization Processing for Al-Based Alloy Powder for Additive Manufacturing. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1373366.
Full textAnderson, Iver, and John Siemon. Specific Adaptation of Gas Atomization Processing for Al-Based Alloy Powder for Additive Manufacturing. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1415042.
Full textSlotwinski, John A., William E. Luecke, Eric A. Lass, and Antonio Possolo. Interlaboratory mechanical-property study for Cobalt-Chromium alloy made by laser powder-bed-fusion additive manufacturing. Gaithersburg, MD: National Institute of Standards and Technology, August 2018. http://dx.doi.org/10.6028/nist.tn.2006.
Full textSen-Britain, S. T., N. D. Keilbart, K. E. Kweon, T. A. Pham, C. A. Orme, B. C. Wood, and A. J. Nelson. Chapter 5. Characterization of Surface Oxide Chemistry of New and Recycled Ti-Al Alloy Powders used in Laser Powder Bed Fusion Additive Manufacturing. Office of Scientific and Technical Information (OSTI), July 2020. http://dx.doi.org/10.2172/1644249.
Full textPlotkowski, Alex, Fred List, III, Keith Carver, and Ryan Dehoff. Feedstock Modification for Enhanced Additive Alloys. Office of Scientific and Technical Information (OSTI), June 2020. http://dx.doi.org/10.2172/1764481.
Full textLi, Nan. Additive Manufacturing of Hierarchical Multi-Phase High-Entropy Alloys for Nuclear Component. Office of Scientific and Technical Information (OSTI), October 2017. http://dx.doi.org/10.2172/1398940.
Full text