Dissertations / Theses: 'Airframes Maintenance and repair'

1

Kannappan, Laxmikant Aerospace Civil &amp Mechanical Engineering Australian Defence Force Academy UNSW. "Damage detection in structures using natural frequency measurements." Awarded by:University of New South Wales - Australian Defence Force Academy. Aerospace, Civil & Mechanical Engineering, 2009. http://handle.unsw.edu.au/1959.4/44852.

Full text

Abstract:

In the last two decades, the emphasis in aircraft maintenance has been on developing online structural health monitoring systems to replace conventional non destructive inspection techniques which require considerable down-time, human effort and cost. Vibration based damage detection is one of the most promising techniques for implementation in Structural Health Monitoring (SHM). In vibration based methods, the presence of damage is detected by monitoring changes in one of the dynamic parameters of the structure, resonant frequencies, modeshapes or damping characteristics. Compared to modeshape based methods, frequency based methods have the advantage that measurements need to be taken only at a single location. Previous developments on frequency based techniques have relied on Finite Element Model updating; analytical techniques have hitherto been restricted to beams due to the complexity in developing equations for cracked two dimensional structures. In this thesis the analytical approach using an energy formulation is extended to plates with through-thickness cracks, where modeshapes from either numerical modelling or experimental measurements can be employed to determine the energy of vibration. It is demonstrated that by using a hybrid approach, incorporating experimentally measured modeshapes along with measured changes in frequencies, the damage parameters can be estimated without resorting to theoretical modelling or numerical analysis. The inverse problem of finding the crack location, size and orientation from measured changes in frequencies is addressed using minimisation techniques. The forward problem and the inverse algorithm is first validated using numerical simulation and experimental testing of beams with edge cracks and centre cracks. The application of the methodology to the two dimensional case is then validated by numerical simulation and experimental modal analysis of plates with through thickness cracks. A statistical procedure is developed for determination of the 90/95 probability of crack detection and the minimum detectable crack size in both cases. It is demonstrated that the measurement of frequency changes can be successfully employed to detect and assess the location and size of cracks in beams and plates, using modeshapes from theory, Finite Element Analysis.

APA, Harvard, Vancouver, ISO, and other styles

2

Al-kaabi, Hamad A. "Airlines' maintenance, repair and overhaul (MRO) configurations." Thesis, Cardiff University, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.437225.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bridges, Michael R. "Optimally funding Army Installation repair and maintenance activities." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA341063.

Full text

Abstract:

Thesis (M.S. in Operations Research) Naval Postgraduate School, September 1997.
"September 1997." Thesis advisor(s): Robert F. Dell. Includes bibliographical references (p. 43-44). Also available online.

APA, Harvard, Vancouver, ISO, and other styles

4

Nikou, Vasilios 1972. "Welded repair and maintenance in the space environment." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/91796.

Full text

Abstract:

Thesis (Nav.E.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2003.
Includes bibliographical references (leaves 73-75).
by Vasilios Nikou.
Nav.E.
S.M.

APA, Harvard, Vancouver, ISO, and other styles

5

Kelly, Annette. "Comparative analysis of intermediate level maintenance repair process." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2002. http://library.nps.navy.mil/uhtbin/hyperion-image/02Jun%5FKelly.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Toves, Peter Rocky. "Evaluating Success Factors in Implementing E-Maintenance in Maintenance, Repair, and Overhaul (MRO) Organizations." ScholarWorks, 2015. https://scholarworks.waldenu.edu/dissertations/767.

Full text

Abstract:

Despite more than a decade-long process to transition aircraft maintenance practices from paper-to electronic-based systems, some organizations remain unable to complete this transition. Researchers have indicated that while organizations have invested resources in technology improvements, there remains a limited understanding of the factors that contribute to effectively managing technology-enabled change. The purpose of this case study was to identify and explore socio-technical (ST) factors that inhibit an effective transition from a paper-based system to an electronic-based system for aircraft maintenance. A conceptual model applying theories of change management, technology acceptance, systems thinking, and ST theory informed the research. Thirteen participants provided data via semistructured interviews, field observations, follow-up interviews, other documentation, and a questionnaire. Data were analyzed with open and axial coding techniques to identify themes, which were then crosschecked and triangulated with observation and follow-up interview data. Findings revealed communication issues, a fundamental misconception in training, and a false assumption that all personnel easily acquire computer literacy. Benefits gained from this study should assist maintenance, repair, and overall (MRO) organizations within the Department of Defense to improve current and future technology implementation as the research underscores real-life issues from a comparable organization. The implications for positive social change provide a greater understanding of technology-enabled change and contribute to the development of best practices for technology initiatives that address common ST issues in the MRO workplace.

APA, Harvard, Vancouver, ISO, and other styles

7

Luyt, Leslie. "Automated grid fault detection and repair." Thesis, Rhodes University, 2012. http://hdl.handle.net/10962/d1006693.

Full text

Abstract:

With the rise in interest in the field of grid and cloud computing, it is becoming increasingly necessary for the grid to be easily maintainable. This maintenance of the grid and grid services can be made easier by using an automated system to monitor and repair the grid as necessary. We propose a novel system to perform automated monitoring and repair of grid systems. To the best of our knowledge, no such systems exist. The results show that certain faults can be easily detected and repaired.
TeX
Adobe Acrobat 9.51 Paper Capture Plug-in

APA, Harvard, Vancouver, ISO, and other styles

8

Gamede, Cyril Vuyani. "Boiler maintenance using expert systems." Master's thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/18798.

Full text

Abstract:

This research explores the application of expert systems to the maintenance of boilers, are as follows: and its main objectives [1] To explore the application of expert systems in the maintenance of boilers. [2] To simplify the task of boiler maintenance with the help of expert systems. [3] To improve the skills of boiler maintenance workers through the knowledge 'captured ' or 'preserved' by expert systems. [4] To minimise errors which may cost time, money, effort and possible risk of injury to boiler maintenance personnel. [5] To develop a prototype expert system which can advise and assist boiler maintenance personnel. [6) To contribute to research in the application of expert systems in the field of engineering.

APA, Harvard, Vancouver, ISO, and other styles

9

Haidvogel, Robert F. "The Afloat maintenance Command: organizational and funding issues in Navy ship maintenance, repair, and modernization." Thesis, Monterey, California. Naval Postgraduate School, 1992. http://hdl.handle.net/10945/23521.

Full text

Abstract:

Approved for public release; distribution is unlimited
The goal of current Navy surface ship maintenance and repair strategy is to sustain readiness and to maximize both combat capability and the amount of time ships are available for employment during their lifetime. The established organizational framework of the Navy to perform this task includes a complex array of activities that are effective overall, but at the expense of efficiency. The current drawdown in budget resources requires that the goals of ship maintenance and modernization be met with improved efficiency. The Afloat Maintenance Command is a proposal to restructure the existing maintenance hierarchy. Improvements in the process of maintenance and modernization are incorporated in the Afloat Maintenance Command through the elimination of redundancies in capabilities and the improvement of funding flows to enhance organizational efficiency and effectiveness. This thesis will provide an overview of the Afloat Maintenance Command and its possible organization in consolidating assets from existing maintenance activities. Additionally, funding alternatives for the Afloat Maintenance Command will be developed and assessed.

APA, Harvard, Vancouver, ISO, and other styles

10

De, Wet Vorster Hendrik. "An analysis of the effectiveness of the asset maintenance plan at Spoornet : case study : class diesel locomotives (traction and rolling stock)." Thesis, Peninsula Technikon, 2001. http://hdl.handle.net/20.500.11838/1019.

Full text

Abstract:

Thesis (MTech (Business Administration))--Peninsula Technikon, 2001
Maintenance of locomotives is the main function of Bellville Locomotive Traction Depot in the Western Cape. Therefore, it is important to have a sound maintenance plan in place, to prevent a negative impact on the availability and reliability of locomotive supply for hauling power to train services. The purpose of the research is to determine the causes of the increased frequency of maintenance through a case study relating to 35-class locomotives. The abnormal increased frequency of wheel change and inter-bogie control repairs on 35-class diesel locomotives is investigated. A research survey was adopted, which included questionnaires and personal interviews based on the literature search. The target group is L&N section, which includes below-deck maintenance, overhaul and change out, repairs to locomotive bogies, frames, wheels, snubbers, inter-bogie control and traction motors. Sixteen people are responsible for all below-deck repairs and service of 52 locomotives. The results of the research will expose the shortcomings of the maintenance plan and propose solutions. This will be achieved by testing the effectiveness of the existing maintenance plan at Spoornet through the identification of the causes for the abnormal increase in wheel changes and inter-bogie control repairs on 35-class diesel locomotives. The outcome from this case study research will be to quantify the benefits arising from the effective application of a maintenance plan.

APA, Harvard, Vancouver, ISO, and other styles

11

An, Wei 1963. "Strengthening of concrete beams with composite plastic plates." Thesis, The University of Arizona, 1990. http://hdl.handle.net/10150/277246.

Full text

Abstract:

This study investigates the feasibility of strengthening reinforced concrete beams with epoxy-bonded Glass-Fiber-Reinforced-Plastic (GFRP) plates. The composite plate is epoxy-bonded to the tension flange of the beam to increase its stiffness and strength. Seven rectangular and one T-beam, retrofitted with composite plates, were tested to failure under symmetrical 4-point bending. The load versus deflection and the load versus strain in the composite plate, steel rebar and the extreme compression fiber of concrete were measured and plotted for the midspan section throughout the entire range of loading up to failure. Analytical models based on the equilibrium of forces and compatibility of deformations were developed to predict the stresses and deformations of the beam in the linear and nonlinear regions. The predicted and measured results correlated well. The analytical models were used in a parametric study to investigate the effects of design variables such as, plate area, plate strength and stiffness, reinforcement ratio, etc., on the moment-curvature relationships of typical rectangular and T cross sections.

APA, Harvard, Vancouver, ISO, and other styles

12

盧英明 and Ying-ming Lo. "Analysis of maintenance service figures of domestic towngas appliance." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1991. http://hub.hku.hk/bib/B31976645.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Iu, Lai-ling. "Slope mainteannce [i.e. maintenance] and repair works in Hong Kong." Click to view the E-thesis via HKU Scholars Hub, 2005. http://lookup.lib.hku.hk/lookup/bib/B37935392.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Aman, Shah Shahani. "System level airborne avionics prognostics for maintenance, repair and overhaul." Thesis, Cranfield University, 2016. http://dspace.lib.cranfield.ac.uk/handle/1826/11844.

Full text

Abstract:

The aim of this study is to propose an alternative approach in prognostics for airborne avionics system in order to enhance maintenance process and aircraft availability. The objectives are to analyse the dependency of avionic systems for fault propagation behaviour degradation, research and develop methods to predict the remaining useful life of avionics Line Replaceable Units (LRU), research and develop methods to evaluate and predict the degradation performances of avionic systems, and lastly to develop software simulation systems to evaluate methods developed. One of the many stakeholders in the aircraft lifecycle includes the Maintenance, Repair and Overhaul (MRO) industry. The predictable logistics process to some degree as an outcome of IVHM gives benefit to the MRO industry. In this thesis, a new integrated numerical methodology called ‘System Level Airborne Avionic Prognostics’ or SLAAP is developed; looking at a top level solution in prognostics. Overall, this research consists of two main elements. One is to thoroughly understand and analyse data that could be utilised. Secondly, is to apply the developed methodology using the enhanced prognostic methodology. Readily available fault tree data is used to analyse the dependencies of each component within the LRUs, and performance were simulated using the linear Markov Model to estimate the time to failure. A hybrid approach prognostics model is then integrated with the prognostics measures that include environmental factors that contribute to the failure of a system, such as temperature. This research attempts to use data that is closest to the data available in the maintenance repair and overhaul industry. Based on a case study on Enhanced Ground Proximity Warning System (EGPWS), the prognostics methodology developed showed a sufficiently close approximation to the Mean Time Before Failure (MTBF) data supplied by the Original Equipment Manufacturer (OEM). This validation gives confidence that the proposed methodology will achieve its objectives and it should be further developed for use in the systems design process.

APA, Harvard, Vancouver, ISO, and other styles

15

Kieboom, Orio Terry Aerospace Civil &amp Mechanical Engineering Australian Defence Force Academy UNSW. "The conjunctive use of bonded repairs and crack growth retardation techniques." Awarded by:University of New South Wales - Australian Defence Force Academy. School of Aerospace, Civil and Mechanical Engineering, 2007. http://handle.unsw.edu.au/1959.4/38712.

Full text

Abstract:

In an attempt to find a way of improving the damage tolerance of composite bonded repairs to metallic aircraft structures, the effect of using conventional crack growth retardation techniques in conjunction with bonded repairs was experimentally investigated. Hence, an experimental test program was set up to determine whether fatigue crack growth under bonded repairs is retarded further by giving the crack to be repaired a crack growth retardation treatment prior to repair patch application. In addition, it was set up to determine the influence of a bonded repair on the effectiveness of a crack growth retardation method. Centrally cracked aluminium plates were used. Stop drilling followed by cold hole expansion and the application of single overloads were selected as retardation treatments. Two patch materials were considered; boron/epoxy and Glare 2. Further test variables were the aluminium alloy and the plate thickness. Fatigue testing was carried out under constant amplitude loading and baseline results were determined first. In addition to optically monitoring the crack growth, local and global out-of-plane deformations were visualised with holographic interferometry and shadow moire??. Furthermore, the stress intensity factors under the repair patch were examined with strain gauges and measurement of the central crack opening displacement. Disbonds and fracture surfaces were studied after residual strength tests. The crack growth results obtained showed that retardation treatments decrease crack growth rates under a repair patch and that the effectiveness of a retardation treatment is increased by the patch. Although identical crack growth rates were observed under boron/epoxy and Glare 2 patches, the reinitiation period after the retardation treatment lasted longer when Glare 2 patches were applied. Analytical predictions of the extent of retardation based on existing models showed that the conjunctive effect of retardation treatments and bonded repairs was underestimated. A sustained reduction in crack growth rates was observed under bonded repairs with a prior overload retardation treatment. It was concluded that the damage tolerance of bonded repairs is increased by the application of a crack growth retardation treatment because the crack growth is retarded further. These findings indicate that the range of cracks in aircraft for which bonded repairs can be considered is expanded and that economic benefits can be obtained.

APA, Harvard, Vancouver, ISO, and other styles

16

Lia, Debora. "Role of alphaOGG1 in the Maintenance of Mitochondrial Physiology." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLS125/document.

Full text

Abstract:

Les mitochondries sont des structures uniques dans la cellule mammifère. Ces organites portent leur propre génome (ADN mitochondrial, ADNmt) qui se compose d'une petite molécule qui codifie pour 13 polypeptides de la chaîne de transport d'électrons (ETC), 22 ARNt et 2 gènes d'ARNr pour sa propre synthèse protéique. Le MTDNA est proposé pour être plus susceptible au stress oxydatif que le génome nucléaire (ADNn) parce que non seulement il manque d'histones protectrices, mais aussi en raison de sa proximité avec les complexes ETC qui sont les principaux producteurs de ROS dans les cellules de mammifères. Parmi tous les types de dommages à l'ADNmt, les dommages oxydatifs sont les plus répandus et, de loin, les mieux étudiés. La voie de réparation de l'excision de base (BER) est un mécanisme de réparation d'ADN conservé de façon évolutive qui répare les dommages de base d'ADN non volumineux. Puisque la guanine a le potentiel redox le plus bas de toute autre base dans l'ADN, elle est facilement oxydée à la 8-oxoguanine (8-oxoG) qui est l’altération la plus fréquente induite par les ROS sur les deux, l'ADNc et l'ADNmt. Si la fourche de réplication contourne le 8-oxoG avant son élimination, un A est souvent inséré sur le brin d'ADN opposé et les réplications subséquentes corrigent la transversion de G à T. Lorsqu'il est associé à la cytosine, le 8-oxoG est éliminé de l'ADN par l'ADN glycosylase de 8-oxoguanine (OGG1) qui, de cette manière, initie le procédé BER. OGG1 est une glycosylase de ménage bi fonctionnelle qui, conjointement avec d'autres enzymes BER différentes, est présente dans les compartiments nucléaires et mitochondriaux, soulignant l'importance de maintenir l'intégrité de l'ADNmt pour le fonctionnement cellulaire normal. Il a été démontré que la surexpression d'une version recombinante d'OGG1, spécifiquement destinée aux mitochondries par un signal de ciblage mitochondrial supplémentaire (MTS) (OGG1-MTS), protège les cellules d'un stress oxydatif, probablement en raison d'une efficacité accrue dans la réparation De 8-oxoG dans l'ADNmt. L'objectif principal de notre projet est d'élucider si la perte spécifique de l'activité de réparation 8-oxoG dans les mitochondries (mais pas dans le compartiment nucléaire) a un impact sur les fonctions organelles et / ou sur la viabilité cellulaire et aussi pour dévoiler le mécanisme / s Derrière les effets protecteurs d'OGG1 sur la physiologie mitochondriale et la maintenance d'ADNmt
Mitochondria are unique structures within the mammalian cell. These organelles carry their own genome (mitochondrial DNA, mtDNA) which consists of a small molecule that codifies for 13 polypeptides of the electron transport chain (ETC), 22 tRNA and 2 rRNA genes for its own protein synthesis. MtDNA is proposed to be more susceptible to oxidative stress than the nuclear genome (nDNA) because not only it lacks protective histones but also because of its proximity to ETC complexes which are the main ROS producers in mammalian cells. Among all the types of mtDNA damage, oxidative damage is the most prevalent and, by far, the best studied. Base excision repair (BER) pathway is an evolutionarily conserved DNA repair mechanism that repairs non-bulky DNA base damages. Since guanine has the lowest redox potential of any other bases in DNA, it is readily oxidized to 8-oxoguanine (8-oxoG) that is the most frequent alteration induced by ROS on both, nDNA and mtDNA. If the replication fork bypasses the 8-oxoG before its removal, an A is often inserted on the opposite DNA strand and subsequent replications fix the G to T transversion. When paired with cytosine, 8-oxoG is removed from DNA by the 8-oxoguanine DNA glycosylase (OGG1) that in such a way initiates the BER process. OGG1 is a bifunctional housekeeping glycosylase that, together with other various BER enzymes is present in both nuclear and mitochondrial compartments, highlighting the importance of maintaining mtDNA integrity for normal cellular functioning. It has been demonstrated that the overexpression of a recombinant version of OGG1, specifically targeted to mitochondria by an additional Mitochondrial Targeting Signal (MTS) (OGG1-MTS), protects the cells from an oxidative stress, likely due to an increased efficiency in the repair of 8-oxoG in mtDNA. The main goal of our project is to elucidate if the specific loss of 8-oxoG repair activity in mitochondria (but not in nuclear compartment) has an impact on the organelles’ functions and/or on cell viability and also to unveil the mechanism/s behind the protective effects of OGG1 on mitochondrial physiology and mtDNA maintenance

APA, Harvard, Vancouver, ISO, and other styles

17

Yearby, Shedrick Dashun. "USMC Aviation Maintenance and Repair Cost for the H-1 Upgrade." Thesis, Monterey, California. Naval Postgraduate School, 2012. http://hdl.handle.net/10945/6891.

Full text

Abstract:

MBA Professional Report
Approved for public release, distribution unlimited
This research focuses on the Marine Corps Aviation Maintenance and Repair Cost for the H-1 Upgrade platform. Onsite visits with the Program Manager Air 276 (PMA-276), the Naval Supply Weapons Systems Support (NAVSUP WSS), the Defense Logistics Agency (DLA), and Marine Aviation Logistics Squadron 39 (MALS-39) are conducted to obtain information regarding readiness costs and efficiencies that have impacted the total cost for a transitioning aircraft in Marine aviation. PMA-276, NAVSUP WSS, DLA, and MALS-39 make up the H-1 Cross-Functional Team (CFT). The H-1 CFT provides actionable metrics and best practices that focus on cost concerns (programmatic, material, management, and execution) from all levels of aviation logistics and planning. Key areas of improvement or replication are identified through metric-based solutions that affect cost reductions throughout the AH-1Z and UH-1Y integration.

APA, Harvard, Vancouver, ISO, and other styles

18

Wood, Thomas L. "Evaluation of project selection techniques for pavement network maintenance and repair." Thesis, Monterey, California. Naval Postgraduate School, 1994. http://hdl.handle.net/10945/25909.

Full text

Abstract:

Different approaches have been suggested for determining the optimal mix of repair projects for a pavement network. These methods range from random selection to sophisticated mathematical optimization models. This paper presents an analysis of several questions regarding the effectiveness of three possible selection methods. First, the performance of three separate single year project selection methods on different size networks is assessed over a broad funding spectrum. The results indicate that as funding levels increase, the benefit obtained by different selection methods converge. In addition, as the size of the network increases, the convergence tends to occur at progressively lower funding levels. Second, the effect of the performance prediction models on these same selection methods is assessed by altering the coefficients of the models to predict both faster and slower deterioration of the network. The "select sets" of projects created by priority ranking selection and Knapsack IP selection at three separate funding levels are compared to determine how much variation is introduced by the changes in the performance prediction. With a 30% acceleration and deceleration of the deterioration curves, there was little change in the optimal project set created by either method. Finally, a modified Monte Carlo model is used to assess the general shape of the solution space. The results suggest that the solution space is relatively flat except in the immediate vicinity of the optimum. This, in turn, suggests that a Monte Carlo approach to this problem would require a large number of trials to approximate the optimum. This finding conceptually supports findings in this study and others, as well as the intuitive observation, that random maintenance and repair strategies perform poorly compared to more rational approaches. Since only a few sets of repair projects are near the optimum, the chances of a random selection matching one of these near optimal project sets are relatively small.

APA, Harvard, Vancouver, ISO, and other styles

19

Coxon, W. D. "Evaluation of models for decision making in inspection and repair maintenance." Master's thesis, University of Cape Town, 1987. http://hdl.handle.net/11427/21151.

Full text

Abstract:

There has been growth in the costs of maintenance over the last 40 years. This can be linked directly to the changes in production technology over that period of time. However. there has also been growth in the field of management science and operations research. Many models have been developed to assist the maintenance function in its decisions. However. it would appear from engineering journals and shop floor practice that these models are not well used. For this research the method of inspection and repair maintenance has been chosen. Mainly because it is one of the most widely used methods. The objectives of the research are as follows: (1) To investigate the state of the art of plant and equipment maintenance paying particular attention to the inspection and repair policy. (2) To establish what basic models are available for decision making in inspection and repair maintenance. (3) To establish how feasible and useful each of these models is in the practical engineering environment. (4) To consider factors in the implementation of a decision making model in the inspection and repair policy with particular reference to the most practical and feasible model investigated.

APA, Harvard, Vancouver, ISO, and other styles

20

Konda, Issa 1962. "Tractor repair and maintenance costs and management policies in Burkina Faso." Thesis, The University of Arizona, 1991. http://hdl.handle.net/10150/277842.

Full text

Abstract:

Farm machinery management data were collected in Burkina Faso, for the prediction of repair and maintenance costs. Equations were developed to predict repair and maintenance costs of tractors, cane loaders, generators and motorpumps. The analysis of data revealed that tractor repair and maintenance appears a greater burden than predicted by the American and Australian data. Tractor trade-in was not prescribed by the rule of minimum total cost per unit tractor use. Farm machinery and power units were operated more than twice as long as in the United States. New machine purchase was discouraged by the current sugar prices on the local market.

APA, Harvard, Vancouver, ISO, and other styles

21

Toledo, Maria Luiza Guerra de. "Determination of the optimal periodic maintenance policy under imperfect repair assumption." Universidade Federal de Minas Gerais, 2014. http://hdl.handle.net/1843/BUOS-9KRG8A.

Full text

Abstract:

An appropriate maintenance policy is essential to reduce expenses and risks related to repairable systems failures. The usual assumptions of minimal or perfect repair at failures are not suitable for many real systems, requiring the application of Imperfect Repair models. In this work, the classes Arithmetic Reduction of Age and Arithmetic Reduction of Intensity, proposed by Doyen and Gaudoin (2004) are explored. Likelihood functions for such models are derived, and the parameters are estimated, allowing to compute reliability indicators to forecast the future behavior of the failure process. Under the classic Imperfect Repair virtual age model presented by Kijima et al. (1988) (particular case of Aithmetic Reduction of Age class), a periodic Preventive Maintenance policy is proposed, which estimates optimal time intervals for Preventive Maintenance, in order to minimize (preventive and corrective) maintenance costs. Under a dynamic perspective, it is showed how this policy can be improved, using each failure observation in order to recalculate the optimal time to Preventive Maintenance for a particular system, considering the effect of the repair action. These policies are applicable to any Imperfect Repair model. Monte Carlo simulation studies are implemented in order to evaluate the performance of the proposed methods. Those methods are applied to a real situation regarding the maintenance of engines of off-road trucks used in a mining company. These results bring valuable information to support decision making regarding Preventive Maintenance policy.
.

APA, Harvard, Vancouver, ISO, and other styles

22

Peterson, Reginald E. "Exploring Customers' Perceptions of Third Party Maintenance, Repair, and Operating Programs." ScholarWorks, 2016. https://scholarworks.waldenu.edu/dissertations/2170.

Full text

Abstract:

A survey of 25 industrial manufacturing organizations in the U. S. indicated that 70% of respondents experienced dissatisfaction with their outsourcing programs due to unfulfilled expectations, which caused negative continuance intentions. The purpose of this descriptive case study was to explore the experiences of customers who currently use 3PMRO outsourcing programs to determine what factors affect satisfaction levels in the Southern United States. The conceptual framework for this study was the expectancy disconfirmation paradigm, which connects consumer satisfaction level to the fulfillment of consumer expectations. Data were collected from interviews of 22 procurement professionals of maintenance, repair, and operating supplies; observations of 3PMRO supplier performance meetings; and the analysis of performance scorecard documents. Data were analyzed using pattern matching followed by thematic analysis. Three themes were identified through the data analysis that affected consumer satisfaction: inventory management services, utilization of outsourced labor resources, and total cost value of the 3PMRO program. According to results, satisfaction of 3PMRO consumers are based on the proper utilization of a 3PMRO program for the intended limitations of the organization, reduced MRO supply costs, improved inventory management strategies, and improved competitive advantage from the realignment of resources to focus on core competencies. Implications for positive social change include increased awareness of cradle-to-grave inventory management to prevent improper disposal of non-biodegradable materials into our environment.

APA, Harvard, Vancouver, ISO, and other styles

23

Barnhart, Cynthia. "Investigation of need for organized maintenance." Virtual Press, 1986. http://liblink.bsu.edu/uhtbin/catkey/450777.

Full text

Abstract:

The benefits of maintenance have been known for centuries, and throughout history these benefits have been the basis for much discussion. Recently such benefits have been formally proposed in terms of scheduled or cyclical maintenance programs. These programs have been developed for important historic buildings; yet the same benefits can be applied to any house. This concept is the basis of this thesis.The thesis begins with a discussion of the obvious need for some maintenance program and describes the recent interest of local governments in some form of maintenance planning, discussing the benefits of an organized approach to maintenance. Next it briefly reviews the beginnings and history of maintenance theories and is followed by a discussion of maintenance as a level of conservation of building. Basic statistics about homeowners and the development of the survey are addressed, which leads to the presentation of compiled results of the survey and a interpretation of the data. The conclusion indicates a direction for the development of an organized maintenance plan.

APA, Harvard, Vancouver, ISO, and other styles

24

Haddad, Fadi M. "Maintenance in a contractor organization:a practical approach." Thesis, Virginia Tech, 1989. http://hdl.handle.net/10919/44641.

Full text

Abstract:

A model for optimizing the assignment of maintenance actions for a piece of equipment is developed in the thesis. The model considers the detectability and the criticality of component failure in order to assign a maintenance instruction. The thesis also develops the framework for an integrated maintenance management system. The system consists of three modules. The first module is work control. It is used to prepare, schedule, and insure the execution of maintenance instructions. The second module is the equipment condition control module which monitors maintenance effectiveness and accordingly updates the maintenance instructions. The third module is cost control. This is the tool used to monitor the economical performance of the maintenance function. An equipment information system is also presented, and two futuristic maintenance proposals are introduced.

The model and the integrated maintenance management system, constitute a strong tool, that equipment managers can use to optimize the maintenance function, and improve the mechanical, operational, and economical performance of equipment.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles

25

Limbachiya, Mukeshchandra K. "Assessment of the long term performance of repaired reinforced concrete." Thesis, Sheffield Hallam University, 1995. http://shura.shu.ac.uk/19962/.

Full text

Abstract:

Rational decisions about cost-effective maintenance and structural repair are hampered by the absence of comprehensive data on structural performance of generic repair materials acting compositely with deteriorated concrete elements. In the present climate of durability problems in concrete construction such information is of critical importance. In order to assess long-term structural performance of repaired elements, basic short and long-term properties of generic repair materials are required under various exposure conditions. The principle requirements to ensure satisfactory long-term performance of the repair have always been high dimensional stability and relatively high early bond strength of the repair material with the substrate concrete. As part of a "Brite Euram" project, sponsored by E.E.C., the author has obtained considerable experimental data on properties of three commercially available generic repair materials, which are significant to the subsequent structural behaviour of repaired concrete members. A comparison is also made between the performance of these repair materials with a plain concrete mix of similar strength and stiffness. The following generic repair materials were used: a high performance non-shrinkable concrete, a mineral based cementitious material with no additives and no coarse aggregate size particles, and a cementitious mortar which contains styrene acrylic copolymer with fibre additives. The repair materials are supplied as single component systems by their manufacturers, ready for on-site mixing and use, and require only the addition of clean water. Data on strength, stiffness, post peak-load ductility under compression, swelling, shrinkage and creep deformations under various curing conditions are presented in this thesis. In addition water permeability coefficients and chloride penetration profiles of the materials at various ages of exposure have been determined. A comprehensive compilation of chloride diffusion data is made and an empirical expression is derived for the prediction of long-term chloride penetration profiles based on data obtained at relatively early ages. Application of this prediction model to the field data of some Arabian Gulf structures is made. The influence of repair materials on the performance of reinforced concrete compression members has been studied. A theoretical model is also derived to predict the long-term structural interaction between a repair patch and substrate concrete in short compression members of reinforced concrete. The model is based on the basic properties of materials, such as creep deformation, drying shrinkage and modulus of elasticity. The validity of the model is established on the basis of the experimental data obtained in this study. At the end of the thesis, conclusions and recommendations for future research are made.

APA, Harvard, Vancouver, ISO, and other styles

26

Graszi, Nassib Nadim, and M. Zenkin. "Optimization of car operation and repair processes with use of remote electronic diagnostic systems." Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/14598.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Mahmood, Asif. "Maintenance and repair of gastrointestinal mucosa using recombinant peptides and natural products." Thesis, Imperial College London, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.443960.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Zenkin, M., and Y. Golovanova. "Ensuring the reliability of technical diagnostics of vehicles during maintenance and repair." Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/14640.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Karim, Hawzheen. "Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs." Licentiate thesis, Stockholm : Division of Highway Engineering, Royal Institute of Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9260.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Supawiwat, Nutthapon. "A study on road slope management system considering maintenance and repair strategy." 京都大学 (Kyoto University), 2005. http://hdl.handle.net/2433/144540.

Full text

Abstract:

Kyoto University (京都大学)
0048
新制・課程博士
博士(工学)
甲第11867号
工博第2560号
新制||工||1358(附属図書館)
23647
UT51-2005-N701
京都大学大学院工学研究科土木システム工学専攻
(主査)教授大西有三, 教授大津宏康, 教授中北英一
学位規則第4条第1項該当

APA, Harvard, Vancouver, ISO, and other styles

31

Burger, A. F. (Adriaan Francois). "Scheduling algorithms for routine maintenance of roads in maintenance wards of a gravel road network." Thesis, Stellenbosch : Stellenbosch University, 2005. http://hdl.handle.net/10019.1/50446.

Full text

Abstract:

Thesis (MScEng)--University of Stellenbosch, 2005.
ENGLISH ABSTRACT: The study reported in this thesis focuses on the development of algorithms that can be used to schedule routine maintenance work in maintenance wards of a gravel road network, This was undertaken as part of the development of the Blading Optimisation Module of the Gravel Management System of the Provincial Government: Western Cape. Two scheduling algorithms were developed and mapped to a pilot object model on the computer. The algorithms and application interface takes account of the constraints and variables of routine maintenance that were identified through interviews with personnel of the five District Municipalities contained in the Western Cape. The algorithms are tested and evaluated using the pilot application. Based on the evaluation of the algorithms conclusions are drawn and recommendations are made.
AFRIKAANSE OPSOMMING: Die studie beskryf in hierdie tesis fokus op die ontwikkeling van algoritmes vir die skedulering van roetine instandhoudingswerk in instandhoudingswyke van 'n gruispadnetwerk. Dit is ondemeem tydens die ontwikkeling van die "Blading Optimisation Module" van die "Gravel Management System" van die Provinsiale Regering: Wes Kaap. Twee algoritmes is ontwikkel en afgebeeld op 'n loods-objekmodel op die rekenaar. Die algoritmes en toepassingskoppelvlak maak voorsiening vir die beperkings en veranderlikes wat geidentifiseer is tydens onderhoude met personeel van die distrikmunisipaliteite in die Wes Kaap. Die algoritmes is getoets en geevalueer met behulp van die loodstoepassing. Gevolgtrekkings en aanbevelings word gemaak op grond van die resultate van die evaluasie van die algoritmes.

APA, Harvard, Vancouver, ISO, and other styles

32

Rasmekomen, Nipat. "Condition-based maintenance for multi-component systems with degradation interactions." Thesis, University of Cambridge, 2015. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.709026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Soldon, Brian T. "The International Space Station comparative maintenance analysis model (CMAM)." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Sep%5FSoldon.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Dao, Cuong D., and M. J. Zuo. "Selective maintenance for multi-state systems considering the benefits of repairing multiple components simultaneously." Springer, 2014. http://hdl.handle.net/10454/17980.

Full text

Abstract:

No
Many industrial systems such as aircrafts, ships, manufacturing systems, etc. are required to perform several missions with finite breaks between missions. Maintenance is only available within the breaks. Due to the limitation of resources, all components in the system may not be maintained as desired. The selective maintenance problem helps the decision makers figure out what critical components to select and how to perform maintenance on these components. This paper studies the selective maintenance for multi-state series-parallel systems with the benefit of repairing multiple components simultaneously. Both time and cost savings can be acquired when several components are simultaneously repaired in a selective maintenance strategy. As the number of repaired components increases, the saved time and cost will also increase due to the share of setting up between components and another additional reduction amount from the repair of multiple identical components. A non-linear optimization model is developed to find the most reliable system subjected to time and cost constraints. Genetic algorithm is used to solve the optimization model. An illustrative example will be provided.
Natural Sciences and Engineering Research Council of Canada (NSERC) and Vietnam International Education Development (VIED)

APA, Harvard, Vancouver, ISO, and other styles

35

Lai, Tsan-kei, and 黎贊基. "Condition auditing and repair of marine concrete structures in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B43894550.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Atterberg, Sheryl Wilkinson. "Factors related to consumer's perception of household appliance repair costs." Thesis, Kansas State University, 1986. http://hdl.handle.net/2097/9898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Rehmert, Ian Jon. "Availability Analysis for the Quasi-Renewal Process." Diss., Virginia Tech, 2000. http://hdl.handle.net/10919/29270.

Full text

Abstract:

The behavior of repairable equipment is often modeled under assumptions such as perfect repair, minimal repair, or negligible repair. However the majority of equipment behavior does not fall into any of these categories. Rather, repair actions do take time and the condition of equipment following repair is not strictly "as good as new" or "as bad as it was" prior to repair. Non-homogeneous processes that reflect this type of behavior are not studied nearly as much as the minimal repair case, but they far more realistic in many situations. For this reason, the quasi-renewal process provides an appealing alternative to many existing models for describing a non-homogeneous process. A quasi-renewal process is characterized by a parameter that indicates process deterioration or improvement by falling in the interval [0,1) or (1,Infinity) respectively. This parameter is the amount by which subsequent operation or repair intervals are scaled in terms of the immediately previous operation or repair interval. Two equivalent expressions for the point availability of a system with operation intervals and repair intervals that deteriorate according to a quasi-renewal process are constructed. In addition to general expressions for the point availability, several theoretical distributions on the operation and repair intervals are considered and specific forms of the quasi-renewal and point availability functions are developed. The two point availability expressions are used to provide upper and lower bounds on the approximated point availability. Numerical results and general behavior of the point availability and quasi-renewal functions are examined. The framework provided here allows for the description and prediction of the time-dependent behavior of a non-homogeneous process without the assumption of limiting behavior, a specific cost structure, or minimal repair.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

38

Whitlock, Wayne Ronald. "A critical analysis of service quality perceptions of vehicle repair and maintenance retailers." Thesis, Nelson Mandela Metropolitan University, 2010. http://hdl.handle.net/10948/1516.

Full text

Abstract:

The South African motor industry plays a pivotal role in the economy of South Africa and is a leading indicator in economic change. In general, satisfaction of customer service in the motor industry is steadily improving. However, as research has shown, there is still room for improvement within the industry. Knowing what customers expect is a critical step in delivering good quality service to ensure customer retention in the long-term (Zeithaml, Parasuraman & Berry 1990:62-63). Having a good understanding of the value of forming long-term relationships with customers and their evaluation of the quality of the service provided, cannot be underestimated, as failure to actually ask customers what they think of the service could be detrimental in the long-term. Vehicle manufacturers conduct ongoing research to monitor customer perceptions of the quality of the service provided by their vehicle retailers. The information generated from the research findings can be used by manufacturers to improve levels of service where this appears to be lacking, and deal promptly with any customer complaints. Against this background, how vehicle owners judge the quality of the service provided by a franchised vehicle retailer for a repair and maintenance service, will be crucial to understanding how customers form perceptions of service related firms specifically, and in general, even an entire industry. The primary objective of this study is to assess customer perceptions of service quality with a franchised vehicle retailer following a routine repair and maintenance service. The sample consisted of 3 859 respondents who had their vehicles serviced at a GM South Africa franchised vehicle retailer over a one month period. The empirical results of the study revealed that GM South Africa show general positive results in terms of customer service satisfaction, however, there are some areas where additional attention is required.

APA, Harvard, Vancouver, ISO, and other styles

39

Abdo, Fady. "Decision analysis for the prioritization of maintenance and repair activities on engineering facilities." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0021/MQ43990.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Strohmeier, Jörg Harald. "Deterioration of reinforced concrete in a marine environment : repair costs and maintenance strategies." Master's thesis, University of Cape Town, 1994. http://hdl.handle.net/11427/8479.

Full text

Abstract:

Bibliography: p. 108.
This dissertation comprises an investigation into the rate at which reinforced concrete structures deteriorate in the Cape Peninsula due to reinforcement corrosion, the reasons for this deterioration, and the accompanying repair costs. The costing of repair work is calculated per m2 of reinforced concrete and is based on quoted labour rates and material rates of repair materials supplied by four major suppliers in the Western Cape. Formulas are included which enable a person using the data listed in tables and figures to calculate what repair costs will be in future, and also enable the calculation of monthly/annual deposit amounts in order to save sufficient money for future maintenance at a specified date. Life cycle costing and decision models for the maintenance of concrete structures are discussed and guidelines for the establishment of optimal maintenance cycles are included. Based on the results of the life cycle costing exercise the importance of planned preventative maintenance is highlighted. Finally, locally and internationally available maintenance management computer systems are reviewed.

APA, Harvard, Vancouver, ISO, and other styles

41

蔡玉寧 and Yuk-ning Alta Choi. "Repair technology for cracked metallic structures using composite materials." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1999. http://hub.hku.hk/bib/B31222420.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Jones-Crabtree, Ann Jean. "Decision-making variances : creating deferred maintenance solutions using the paradigm of sustainable design." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/20185.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

李建中 and Kin-chung Casey Lee. "An evaluation of the Hong Kong Government's policy on managing automotive services: are new controlsnecessary?" Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1997. http://hub.hku.hk/bib/B31965283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Alden, Michael Augustine. "Management system for roof replacement." Thesis, Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-03292004-141808/unrestricted/alden%5Fmichael%5Fa%5F200312%5Fms.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Conrad, George R. "Development of course outlines for a maintenance technician training program." CSUSB ScholarWorks, 1985. https://scholarworks.lib.csusb.edu/etd-project/415.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Nagarajan, Aparna. "Insights into the maintenance and repair of photosystem ii, a dynamic membrane protein complex." Thesis, Oklahoma State University, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3614386.

Full text

Abstract:

Photosystem II (PSII) is recognized as the main site for high light induced damage. One of the core subunits of PSII, D1 protein encoded by the psbA gene, is identified as a high turnover protein that undergoes degradation and replacement as a part of the repair process in PSII. Studies on D1 repair have shown the synchronous nature of D1 degradation and synthesis. FtsH a AAA protease, is known to cause D1 degradation. Therefore, it is widely speculated that damaged D1 is replaced by newly synthesized D1. Although, there is no direct evidence suggesting the removal of damaged subunits only. Alternatively, an induction of the general increase in the turnover rate of D1 could trigger the replacement of all D1 subunits in a random fashion. In this work, I have addressed these two alternate hypotheses by developing a genetic system involving dual D1 expression. Strains were constructed with the parallel expression of a WT psbA2 in the ectopic and a damage prone mutant psbA2 at the native locus. Firstly, a WT ectopic strain (eWT) was constructed by transforming a psbA deletion strain with a WT psbA2, which was synthesized using synthetic biology and fusion PCR. Secondly, mutant psbA2 was introduced into the native locus of the eWT strain. All the dual D1 strains showed high PSII activity. Higher PSII levels represent increased proportion of PSII with WT D1 incorporated, as the mutant does not correspond to high PSII levels. Immunoblot analysis of a dual strain nS345P: eWT against D1 did not show an accumulation of the S345P form, which exists as pre-D1. However, deletion of the FtsH protease in nS345P: eWT showed an accumulation of pre-D1 along with mature D1. This indicates that S345P mutant forms are targeted for repair in the dual strain. Additionally, psbA2 gene dosage effect was also studied by expressing two WT psbA2. Similar levels of PSII and D1 were observed in the single and double WT strain. This suggests that level of PSII is being regulated and that D1 is not the regulating factor. Therefore, PSII homeostasis is maintained by some other protein factor.

APA, Harvard, Vancouver, ISO, and other styles

47

Moodi, Faramarz. "Development of a knowledge-based system for the repair and maintenance of concrete structures." Thesis, University of Newcastle Upon Tyne, 2001. http://hdl.handle.net/10443/481.

Full text

Abstract:

Information Technology (IT) can exploit strategic opportunities for new ways of facilitating information and data exchange and the exchange of expert and specialist opinions in any field of engineering. Knowledge-Based Systems are sophisticated computer programs which store expert knowledge on specific subject and are applied to a broad range of engineering problems. Integrated Database applications have facilitated the essential capability of storing data to overcome an increasing information malaise. Integrating these areas of Information Technology (IT) can be used to bring a group of experts in any field of engineering closer together by allowing them to communicate and exchange information and opinions. The central feature of this research study is the integration of these hitherto separate areas of Information Technology (IT). In this thesis an adaptable Graphic User Interface Centred application comprising a Knowledge-Based Expert System (DEMARECEXPERT), a Database Management System (REPCON) and Evaluation program (ECON) alongside visualisation technologies is developed to produce an innovative platform which will facilitate and encourage the development of knowledge in concrete repair. Diagnosis, Evaluation, MAintenance and REpair of Concrete structures (DEMAREC) is a flexible application which can be used in four modes of Education, Diagnostic, Evaluation and Evolution. In the educational mode an inexperienced user can develop a better understanding of the repair of concrete technology by navigating through a database of textual and pictorial data. In the diagnostic mode, pictures and descriptive information taken from the database and performance of the expert system (DEMAREC-EXPERT) are used in a way that makes problem solving and decision making easier. The DEMAREC-EXPERT system is coupled to the REPCON (as an independent database) in order to provide the user with recommendations related to the best course required for maintenance and in the selection of materials and methods for the repair of concrete. In the evaluation mode the conditions observed are described in unambiguous terms that can be used by the user to be able to take engineering and management actions for the repair and maintenance of the structure. In the evolution mode of the application, the nature of distress, repair and maintenance of concrete structures within the extent of the database management system has been assessedT. he new methodology of data/usere valuation could have wider implications in many knowledge rich areas of expertise. The benefit of using REPCON lies in the enhanced levels of confidence which can be attributed to the data and to contribution of that data. Effectively, REPCON is designed to model a true evolution of a field of expertise but allows that expertise to move on in faster and more structured manner. This research has wider implications than within the realm of concrete repair. The methodology described in this thesis is developed to provide tecýnology transfer of information from experts, specialists to other practitioners and vice versa and it provides a common forum for communication and exchange information between them. Indeed, one of the strengths of the system is the way in which it allows the promotion and relegation of knowledge according to the opinion of users of different levels of ability from expert to novice. It creates a flexible environment in which an inexperienced user can develop his knowledge in maintenance and concrete repair structures. It is explained how an expert and a specialist can contribute his experience and knowledge towards improving and evolving the problem solving capability of the application.

APA, Harvard, Vancouver, ISO, and other styles

48

Dittrich, Katarina. "Olfactory neurogenesis during tissue maintenance and repair." Doctoral thesis, 2018. http://hdl.handle.net/11858/00-1735-0000-002E-E41A-B.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Pak, Andrey. "Maintenance and repair contracts: Modeling and optimization." 2007. http://link.library.utoronto.ca/eir/EIRdetail.cfm?Resources__ID=788756&T=F.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Tshibangu, W. A. Muzemba. "Concrete repair with realkalisation and the management thereof." Thesis, 2012. http://hdl.handle.net/10210/5740.

Full text

Abstract:

M.Ing.
Maintaining and repairing building stock, repair and replacement of the infrastructure, has been a facet of the European building industry for more than 50 years. Deterioration of structures to a level that renders them unusable is a more recent occurrence in South Africa. World-wide changes in the proportion of construction expenditure on new construction and repair and refurbishing of existing structures has occurred only the last two decades. Today, nearly 50 % of such expenditure is on repair and renovation in comparison to proportions of 30 % of previous years. Projections indicate that this trend will continue at least to the next coming century. 1171 Such a substantial proportion of construction expenditure must be expected to influence the market for repair materials, specialized techniques and services. Therefore, a good understanding of the all range of modern concrete repair materials, associated techniques and services as well as latest developments in concrete rehabilitation technology is a prerequisite for designers and users of concrete structures. The following pages attempt to present the basic background of modern concrete repair approaches with regard to the intended use of building structures. They will also deal with the management of a repair project with realkalisation as a remediation strategy. The present condition of the Rand Afrikaans University main campus buildings will serve as a case study model.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'Airframes Maintenance and repair'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles