Log in

Relevant bibliographies by topics / AGC CIRCUITS

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'AGC CIRCUITS'

Author: Grafiati

Published: 11 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'AGC CIRCUITS.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "AGC CIRCUITS"

1

Gao, Zhi Qiang, Fu Xiang Huang, Jing Li, Liang Yin, and Xiao Wei Liu. "A CMOS Automatic Gain Control Circuit for Biomedical Applications." Key Engineering Materials 645-646 (May 2015): 1308–13. http://dx.doi.org/10.4028/www.scientific.net/kem.645-646.1308.

Full text

Abstract:

In this paper, a low-voltage automatic gain control (AGC) circuits is presented. The proposed circuit uses a novel approximated exponential function to increase the dB-linear output range. The three-stage AGC is fabricated in 0.18μm CMOS technology and shows the maximum gain variation of more than 100dB and a 67dB linear range with linearity error of less than ±1dB. The range of gain variation can be controlled from 34 to 101dB. The AGC dissipates less than 2.3mA under 1.8V supply voltage while occupying 0.4mm2 of chip area.

APA, Harvard, Vancouver, ISO, and other styles

2

Pandey, Rajeshwari, Neeta Pandey, Mayank Bothra, and Sajal K. Paul. "Operational Transresistance Amplifier-Based Multiphase Sinusoidal Oscillators." Journal of Electrical and Computer Engineering 2011 (2011): 1–8. http://dx.doi.org/10.1155/2011/586853.

Full text

Abstract:

Multiphase sinusoidal oscillator circuits are presented which utilize Operational Transresistance Amplifier (OTRA) as the active element. The first circuit producesnodd-phase oscillations of equal amplitudes and equally spaced in phase. The second circuit is capable of producingnodd- or even- phase oscillations equally spaced in phase. An alternative approach is discussed in the third circuit, which utilizes a single-phase tunable oscillator circuit which is used to inject signals into a phase shifter circuits. An automatic gain control (AGC) circuit has been implemented for the second and third circuit. The circuits are simple to realize and have a low component count. PSPICE simulations have been given to verify the theoretical analysis. The experimental outcome corroborates the theoretical propositions and simulated results.

APA, Harvard, Vancouver, ISO, and other styles

3

Badger, D. M. "Stability of AGC circuits containing peak detectors." IEEE Transactions on Consumer Electronics 38, no. 3 (1992): 377–83. http://dx.doi.org/10.1109/30.156710.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sotner, Roman, Lukas Langhammer, Jan Jerabek, Peter A. Ushakov, and Tomas Dostal. "Fractional-Order Phase Shifters with Constant Magnitude Frequency Responses." Elektronika ir Elektrotechnika 25, no. 5 (October 6, 2019): 25–30. http://dx.doi.org/10.5755/j01.eie.25.5.24352.

Full text

Abstract:

This contribution presents and experimentally analyzes the idea how to reach the constant magnitude as well as the phase response in the fractional-order (FO) phase when shifting two-ports. The straightforward method employing the automatic gain control circuit (AGC) in a cascade after so-called constant phase block approximating FO integrator or differentiator is studied. The variable gain amplifier utilized in AGC and simple RC-based FO constant phase elements (approximating capacitors with order alpha = 1/4 and alpha = 1/2 as an example) connected in the feedback of operational amplifier-based integrator are established in the experimental setup. The operation indicated in three decades (between 100 Hz and 100 kHz) is evaluated. The known solutions of the standard FO phase shifting circuits are discussed and generally compared with the features obtained in this paper, together with the supposed effects of AGC on their performances.

APA, Harvard, Vancouver, ISO, and other styles

5

Fuada, Syifaul, Angga Pratama Putra, Yulian Aska, and Trio Adiono. "A First Approach to Design Mobility Function and Noise Filter in VLC System Utilizing Low-cost Analog Circuits." International Journal of Recent Contributions from Engineering, Science & IT (iJES) 5, no. 2 (July 6, 2017): 14. http://dx.doi.org/10.3991/ijes.v5i2.6700.

Full text

Abstract:

<p class="0abstract">Visible Light Communication (VLC) as one of wireless technology must be able to offer a good capability as mobile communication system. The signal will be faded when the distance and angle of LED to photo-detector become higher at a certain distance. Other problem at VLC system is light interference noise which is caused by flicker effect from other light sources such as incandescent, fluorescent, DC-lamp (i.e. flashlight) and the sunlight. Each of lights have specific carried signal characteristics and it can influences the VLC system. In this paper we offer design of mobile VLC system based on analog domain. We use Automatic Gain Controller (AGC) circuit using commercially available IC and it will be placed at analog front-end receiver side. AGC can self-adjust its gain according to the input signal amplitude. We also design analog filter to eliminate all interferences noise spectrum which is existed under 50 KHz. We design both circuits, analog filter and AGC in VLC receiver system with low-cost. The test data are obtained through the simulation and achieved good results in ideal condition.</p>

APA, Harvard, Vancouver, ISO, and other styles

6

Khoury, J. M. "On the design of constant settling time AGC circuits." IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing 45, no. 3 (March 1998): 283–94. http://dx.doi.org/10.1109/82.664234.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Yu, Min Li, Yan Jun Bi, and Hong Xiu Meng. "Design of Digital Storage Oscilloscope Based on FPGA." Applied Mechanics and Materials 333-335 (July 2013): 2323–26. http://dx.doi.org/10.4028/www.scientific.net/amm.333-335.2323.

Full text

Abstract:

A kind of portable digital storage oscilloscope (DSO) is developed in this paper. It builds trigger, storage, measurement module for embedded system with programmable logic resource of FPGA chip. The external digital circuits of a digital oscilloscope is achieved. And it saves a lot of cost by implanting NIOS II soft-core processor as the control unit of the system in the FPGA. This system has the function of automatic frequency control (AFC) and automatic gain control (AGC), and it can measure the signal conveniently.

APA, Harvard, Vancouver, ISO, and other styles

8

MASUDA, T., N. SHIRAMIZU, E. OHUE, K. ODA, R. HAYAMI, M. KONDO, T. ONAI, et al. "A SiGe HBT IC CHIPSET for40-Gb/s OPTICAL TRANSMISSION SYSTEMS." International Journal of High Speed Electronics and Systems 13, no. 01 (March 2003): 239–63. http://dx.doi.org/10.1142/s0129156403001594.

Full text

Abstract:

Using a 0.2-μm self-aligned epitaxial-growth silicon-germanium (SiGe) heterojunction bipolar transistor (HBT) technology, we have developed a chipset for 40-Gb/s time-division multiplexing optical transmission systems. In this paper, we describe seven analog and digital ICs: a 45-GHz bandwidth transimpedance amplifier, a 48.7-GHz bandwidth automatic-gain-controllable amplifier, a 40-Gb/s decision circuit, a 40-Gb/s full-wave rectifier, a 40-Gb/s limiting amplifier with a 32-dB gain, a 45-Gb/s 1:4 demultiplexer, and a 45-Gb/s 4:1 multiplexer. To increase bandwidth of the transimpedance amplifier, a common-base input stage is introduced. In order to have high gain and wide bandwidth simultaneously, active load circuits composed of a differential transimpedance amplifier are used for the AGC amplifier, the limiting amplifier, and the decision circuit. Full-rate clocking is employed to reduce the influence caused by clock-duty variation in digital circuits such as the decision circuit, the demultiplexer, and the multiplexer. All ICs were characterized by using on-wafer probes, and some of them were built in brass-packages for bit-error rate measurement.

APA, Harvard, Vancouver, ISO, and other styles

9

Plyushch, O. H., and V. I. Kravchenko. "Utilization of AGC circuits in signal processing algorithms in adaptive antenna arrays." Connectivity 142, no. 6 (2019): 52–57. http://dx.doi.org/10.31673/2412-9070.2019.065257.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bentler, Ruth A., and John A. Nelson. "Assessing Release-Time Options in a Two-Channel AGC Hearing Aid." American Journal of Audiology 6, no. 1 (March 1997): 43–51. http://dx.doi.org/10.1044/1059-0889.0601.43.

Full text

Abstract:

The purpose of this study was to determine whether different release times, as implemented in a commercial two-channel AGC hearing aid, would result in differing speech intelligibility performance, user preference, or use time. In experiment one, 14 subjects were fitted with a two-channel multi-memory AGC hearing aid. Four memories were programmed to have identical frequency responses and output limitation characteristics. Only the release times were varied, with the low channel/high channel set as follows (in ms): 20/35, 20/150, 100/35, 500/7. Results obtained from the NST (+5 S/N), magnitude estimations of intelligibility, and data-logging of use time did not show any release-time pair to be superior to any other. In experiment two, 10 subjects participated in a forced-choice, paired-comparison procedure using the same release-time pairs from experiment one. Auditory stimuli consisted of three input levels, consisting of speech, speech in noise, and music. Results indicated no release-time pair to be superior in any listening condition. Results may be explained, in part, by the use of a curvilinear compression circuit and the milder hearing loss exhibited by the subjects. Future investigation of the effect of release-time variation should be carried out on circuits with adjustable compression parameters (and fixed compression ratios) with listeners exhibiting different degrees of hearing loss.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "AGC CIRCUITS"

1

Fletcher, R. G. "Power semiconductor devices in A.C. circuit protection." Thesis, Imperial College London, 1987. http://hdl.handle.net/10044/1/7921.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gupta, Narendra Kumar. "Inductive interference into a lineside signalling cable in A.C. electric railway systems." Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.252792.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Couto, Barone Dante Augusto Mazaré Guy. "Conception d'un circuit intégré arbitre de bus de communication multiprotocoles ABC M /." S.l. : Université Grenoble 1, 2008. http://tel.archives-ouvertes.fr/tel-00311675.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gibson, Andrew A. P. "Variational finite element analysis of microwave circuits and gyrotropic components." Thesis, University of Manchester, 2003. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:98230.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chen, Jian. "ULTRA LOW POWER READ-OUT INTEGRATED CIRCUIT DESIGN." Wright State University / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=wright1345480982.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Pagliarani, Stefano <1978&gt. "Progetto del circuito di lubrificazione di una trattrice agricola." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2009. http://amsdottorato.unibo.it/2109/1/Pagliarani_Stefano_tesi.pdf.

Full text

Abstract:

Today the design of hydraulic and lubrication circuits is becoming more and more important. The aim of this study is to develop a methodology for the design of the lubrication circuit of an agricultural tractor. In this paper the lubrication circuit of a continuously variable transmission is analysed. Several lines of the circuit are considered and in particular the lubrication of gears is discussed. The worst possible working condition which corresponds to the highest power dissipation for each part of the transmission is determined. The model of the lubrication circuit is developed with two different software simulations (Automation Studio & Amesim). In order to check the reliability of the simulation models and to characterise the lubrication circuit, experimental tests are performed. The comparison between the values of pressure drops obtained by the models and by the experimental test, demonstrates that it is possible to use these programs for the set up of a simple model of the lubrication circuit. The calculation of oil flows necessary for a force-fed lubrication of the gears, the simulation of the circuit by commercial software, and the validation of the circuit design allow to set up a preliminary equilibrium among the pipes and a proper flow rate distribution. Optimising the circuit design in the initial phase of the project is very important. The experimental adjustment of the circuit, which is often difficult, can be simplified; time and cost production can be reduced.

APA, Harvard, Vancouver, ISO, and other styles

7

Pagliarani, Stefano <1978&gt. "Progetto del circuito di lubrificazione di una trattrice agricola." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2009. http://amsdottorato.unibo.it/2109/.

Full text

Abstract:

Today the design of hydraulic and lubrication circuits is becoming more and more important. The aim of this study is to develop a methodology for the design of the lubrication circuit of an agricultural tractor. In this paper the lubrication circuit of a continuously variable transmission is analysed. Several lines of the circuit are considered and in particular the lubrication of gears is discussed. The worst possible working condition which corresponds to the highest power dissipation for each part of the transmission is determined. The model of the lubrication circuit is developed with two different software simulations (Automation Studio & Amesim). In order to check the reliability of the simulation models and to characterise the lubrication circuit, experimental tests are performed. The comparison between the values of pressure drops obtained by the models and by the experimental test, demonstrates that it is possible to use these programs for the set up of a simple model of the lubrication circuit. The calculation of oil flows necessary for a force-fed lubrication of the gears, the simulation of the circuit by commercial software, and the validation of the circuit design allow to set up a preliminary equilibrium among the pipes and a proper flow rate distribution. Optimising the circuit design in the initial phase of the project is very important. The experimental adjustment of the circuit, which is often difficult, can be simplified; time and cost production can be reduced.

APA, Harvard, Vancouver, ISO, and other styles

8

Kandala, Veera Raghavendra Sai Mallik. "ENERGY EFFICIENT CIRCUIT TECHNIQUES FOR SUCCESSIVE APPROXIMATION REGISTER ADC." OpenSIUC, 2012. https://opensiuc.lib.siu.edu/dissertations/539.

Full text

Abstract:

Charge-scaling (CS) successive approximation register (SAR) ADC's are widely used in the design of low power electronics. Significant portions of CS-SAR ADC power are consumed by CS capacitor arrays and comparator circuits. This Dissertation presents circuit techniques to reduce the power consumption of both CS capacitor array and the latch comparator during ADC operations. The impacts of the proposed techniques on ADC accuracies are analyzed and circuit techniques are presented to address the accuracy concerns. The dissertation also presents techniques to cope with capacitor mismatches, which becomes more significant with the use of very small unit capacitors in the CS array. These techniques rely on a novel programmable CS capacitor array that allow optimally grouping the unit capacitors. Based on a 0.13um CMOS technology the proposed techniques are verified with extensive circuit simulation. Post layout simulations are done to evaluate the proposed techniques for energy efficient CS capacitor array.

APA, Harvard, Vancouver, ISO, and other styles

9

Li, Yu. "Redressing timing issues for speed-independent circuits in deep sub-micron age." Thesis, University of Newcastle Upon Tyne, 2012. http://hdl.handle.net/10443/1793.

Full text

Abstract:

With continued advancement in semiconductor manufacturing tech- nologies, process variations become more and more severe. These variations not only impair circuit performance but may also cause po- tential hazards in integrated circuits (IC). Asynchronous IC design, which does not rely on the use of an explicit clock, is more robust to process variations compared to synchronous design and is suggested to be a promising design approach in deep-submicron age, especially for low-power or harsh environment applications. However, the correctness of asynchronous circuits is also becoming challenged by the shrinking technology. The increased wire delays compared to gate delays and threshold variations could bring glitches into the circuit. This work proposes a method to generate a set of su cient timing constraints for a given speed-independent circuit to work correctly when the isochronic fork timing assumption is lifted into a weaker timing assumption. The complexity of the entire process is polyno- mial to the number of gates. The generated timing constraints are relative orderings between the transition events at the input of each gate and the circuit is guaranteed to work correctly by ful lling these constraints under the timing assumption. The benchmarks show that both the number of total constraints and the constraints that are only needed to eliminate strong adversary paths are reduced by around 40% compared to those suggested in the current literature, thus claiming the weakest formally proved condi- tions.

APA, Harvard, Vancouver, ISO, and other styles

10

Malloug, Hani. "Conception de générateurs sinusoïdaux embarqués pour l'auto-test des circuits mixtes." Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAT069/document.

Full text

Abstract:

Développer un générateur de signal analogique efficace est un élément clés pour les BIST des circuits analogiques et mixtes afin de produire le stimulus de test approprié, et remplacer les générateurs de signaux externes couteux dans les protocoles de standard de test fonctionnel analogique et mixte. Dans cette optique, nous présentons dans cette thèse des stratégies différentes de génération de signal sinusoïdal, basées sur les techniques d’annulation d’harmonique, pour le design d’un synthétiseur embarqué de signal sinusoïdal à haute fréquence. Les générateurs proposés utilisent des circuits numériques pour produire un ensemble de signaux carrés déphasés. Ces signaux carrés sont pondérés et combinés en appliquant différentes stratégies d’annulation d’harmonique dans un convertisseur numérique-analogique simplifié. Le générateur sélectionné permet d’annuler toutes les harmoniques en dessous de la 11ème. De plus, une simple stratégie de calibration a été conçue pour compenser l’effet de mismatch et de la variation de process de fabrication sur l’efficacité de la technique d’annulation d’harmonique. La simplicité du circuit rend cette approche adaptable pour le BIST des circuits intégrés analogique et mixte. Les modèles comportementaux, les simulations électriques d’un design en 28nm FDSOI et les résultats expérimentaux sont fournis pour valider la fonctionnalité du générateur proposé. Les résultats obtenus montrent des performances du circuit calibré autour de 52dB de SFDR pour un signal généré à 166MHz
One of the main key points to enable mixed-signal BIST solutions is the development of efficient on-chip analog signal generators that can provide appropriate test stimuli and replace costly external signal generators in standard analog and mixed-signal functional test protocols. In this line, we present in this thesis different sinewave generation strategies based on harmonic cancellation techniques to design a high-frequency on-chip sinusoidal synthetize. The proposed generators employ digital hardware to provide a set of phase-shifted digital square-wave signals. These square-wave signals are scaled and combined using different harmonic cancellation strategies in a simplified current-steering DAC. The selected generator allows the cancellation of all harmonic components up to the eleventh. Additionally, a simple calibration strategy has been devised to compensate the impact of process variations and mismatch on the effectiveness of the harmonic cancellation. The simplicity of the circuitry makes this approach suitable for mixed-signal BIST applications. Electrical simulations of a 28nm FDSOI design and experimental results are provided to validate the functionality of the proposed signal generator. Obtained results show a calibrated performance around 52dB of SFDR for a generated sinusoidal signal at 166 MHz

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "AGC CIRCUITS"

1

Demystifying Switched-Capacitor Circuits. Amsterdam: Newnes (Elsevier), 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Warren, Jean. ABC circus. Everett, Wash: Warren Pub. House, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dreamer, Sue. Circus ABC. Boston: Little, Brown, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Yih-Fang, Huang, Wei Che-Ho, Institute of Electrical and Electronics Engineers., and IEEE International Symposium on Circuits and Systems (1997 : Hong Kong), eds. Circuits and systems in the information age. New York: Institute of Electrical and Electronics Engineers, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gender circuits: Bodies and identities in a technological age. New York, NY: Routledge, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shapiro, Eve. Gender circuits: Bodies and identities in a technological age. New York, NY: Routledge, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

ABC is for circus. [United States]: Ammo Books, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ali, H. M. J. Static model of an A.C. circuit breaker. Manchester: UMIST, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Stuart, Thomas A. A study of ignition and simulation circuits for arcjet thrusters. [Washington, DC: U.S. National Aeronautics and Space Administration, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stuart, Thomas A. A study of ignition and simulation circuits for arcjet thrusters. [Washington, DC: U.S. National Aeronautics and Space Administration, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "AGC CIRCUITS"

1

Oh, Taehyoun, and Ramesh Harjani. "Adaptive XTCR, AGC, and Adaptive DFE Loop." In High Performance Multi-Channel High-Speed I/O Circuits, 47–67. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-4963-8_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Alam, Shahbaz. "Design of AGC circuits for oscillator using current conveyor based translinear loops." In Recent Trends in Communication and Electronics, 349–54. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003193838-63.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dugdale, David. "A.C. Circuits." In Essentials of electromagnetism, 231–72. London: Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-22780-8_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Morris, Noel M., and Frank W. Senior. "A.C. Series and Parallel Circuits." In Electric Circuits, 99–120. London: Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-11232-6_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Palani, Rakesh Kumar, and Ramesh Harjani. "ADC." In Analog Circuits and Signal Processing, 103–21. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-46628-6_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Morris, Noel M. "Poly-Phase a.c. Circuits." In Mastering Electrical Engineering, 257–70. London: Macmillan Education UK, 1985. http://dx.doi.org/10.1007/978-1-349-18015-8_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bird, John. "Power in a.c. circuits." In Bird's Electrical Circuit Theory and Technology, 491–506. 7th ed. London: Routledge, 2021. http://dx.doi.org/10.1201/9781003130338-33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Morris, Noel M. "Poly-Phase a.c. Circuits." In Mastering Electrical Engineering, 257–70. London: Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-12230-1_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Pointon, A. J., and H. M. Howarth. "Coupled circuits." In AC and DC Network Theory, 90–105. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3142-1_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Li, Weitao, Fule Li, and Zhihua Wang. "ADC Architecture." In Analog Circuits and Signal Processing, 9–45. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-62012-1_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "AGC CIRCUITS"

1

Erbes, Andreja, Xueyong Wei, and Ashwin A. Seshia. "MEMS-based mechanical AGC for oscillator circuits." In 2013 Joint European Frequency and Time Forum & International Frequency Control Symposium (EFTF/IFC). IEEE, 2013. http://dx.doi.org/10.1109/eftf-ifc.2013.6702052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Xie, Michael, Sangtak Park, Eihab Abdel-Rahman, and Mustafa Yavuz. "Actuation of a Frequency Modulated MEMS Gyroscope." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34817.

Full text

Abstract:

This paper describes an analog actuation circuit for a novel frequency-modulated MEMS gyroscope. The circuit provides an amplitude-modulated (AM) signal as the input into a RLC resonant drive circuit, which drives the gyroscope. The actuation system is composed an automatic gain control (AGC) loop, a low pass filter, an amplitude modulation component and a resonant drive circuit. The AM signal is composed of a modulating signal that excite a natural frequency of gyroscope drive mode and a carrier signal with a frequency corresponding to the electrical resonant frequency of the RLC circuit. Both feedforward and feedback AGC configurations are used to stabilize the envelope of the signal. However, the breadboard implementations of the feedforward and feedback circuits in their current configurations have similar signal to noise ratio to that of the function generator. To improve the actuation circuit performance, we plan to include the resonant drive circuit within the AGC feedback loop and implement the actuation circuit on PCB.

APA, Harvard, Vancouver, ISO, and other styles

3

Tran, Fung, and Scott. "Automatic gain control (AGC) circuit for high density BiCMOS SRAM." In 1993 Symposium on VLSI Circuits. IEEE, 1989. http://dx.doi.org/10.1109/vlsic.1989.1037494.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhou Ning and Zai-ming Li. "An improved analog AGC for TD-SCDMA receiver." In 2007 5th International Conference on Communications, Circuits and Systems. IEEE, 2007. http://dx.doi.org/10.1109/icccas.2007.4348141.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Liao Ji-chang and He Song-bai. "An improved analog AGC for TD-SCDMA receiver." In 2007 5th International Conference on Communications, Circuits and Systems. IEEE, 2007. http://dx.doi.org/10.1109/icccas.2007.6250059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Alegre, J. P., B. Calvo, S. Celma, and F. Aznar. "CMOS combined feedforward/feedback AGC circuit for VHF applications." In 2010 53rd IEEE International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2010. http://dx.doi.org/10.1109/mwscas.2010.5548721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Han, Wei, Shan Wang, and Bo Yang. "Design and implementation of AGC algorithm circuit for high PAPR signal." In 2016 International Conference on Integrated Circuits and Microsystems (ICICM). IEEE, 2016. http://dx.doi.org/10.1109/icam.2016.7813553.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Akkaya, Ayca, Firat Celik, Armin Tajalli, and Yusuf Leblebici. "A 10b SAR ADC with Widely Scalable Sampling Rate and AGC Amplifier Front-End." In 2018 IEEE Nordic Circuits and Systems Conference (NORCAS): NORCHIP and International Symposium of System-on-Chip (SoC). IEEE, 2018. http://dx.doi.org/10.1109/norchip.2018.8573505.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Nauta, Henk C., and Ernst H. Nordholt. "High-Performance Audio Amplifier with AGC Control and Signal Clipping for Portable Military Radio." In Twelfth European Solid-State Circuits Conference. IEEE, 1986. http://dx.doi.org/10.1109/esscirc.1986.5468314.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Maxim, A., M. Gheorge, and C. Turinici. "Zero-Second-IF SiGe BiCMOS Satellite Radio Tuner Using a Dual RF/IF AGC Loop." In 2007 IEEE Symposium on VLSI Circuits. IEEE, 2007. http://dx.doi.org/10.1109/vlsic.2007.4342722.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "AGC CIRCUITS"

1

Weinschenk, Craig, Daniel Madrzykowski, and Paul Courtney. Impact of Flashover Fire Conditions on Exposed Energized Electrical Cords and Cables. UL Firefighter Safety Research Institute, October 2019. http://dx.doi.org/10.54206/102376/hdmn5904.

Full text

Abstract:

A set of experiments was conducted to expose different types of energized electrical cords for lamps, office equipment, and appliances to a developing room fire exposure. All of the cords were positioned on the floor and arranged in a manner to receive a similar thermal exposure. Six types of cords commonly used as power supply cords, extension cords, and as part of residential electrical wiring systems were chosen for the experiments. The non-metallic sheathed cables (NMB) typically found in residential electrical branch wiring were included to provide a link to previous research. The basic test design was to expose the six different types of cords, on the floor of a compartment to a growing fire to determine the conditions under which the cord would trip the circuit breaker and/or undergo an arc fault. All of the cords would be energized and installed on a non-combustible surface. Six cord types (18-2 SPT1, 16-3 SJTW, 12-2 NM-B, 12-3 NM-B, 18-3 SVT, 18-2 NISPT-2) and three types of circuit protection (Molded case circuit breaker (MCCB), combination Arc-fault circuit interrupter (AFCI), Ground-fault circuit interrupter (GFCI)) were exposed to six room-scale fires. The circuit protection was remote from the thermal exposure. The six room fires consisted of three replicate fires with two sofas as the main fuel source, two replicate fires with one sofa as the main fuel source and one fire with two sofas and MDF paneling on three walls in the room. Each fuel package was sufficient to support flashover conditions in the room and as a result, the impact on the cords and circuit protection was not significantly different. The average peak heat release rate of the sofa fueled compartment fires with gypsum board ceiling and walls was 6.8 MW. The addition of vinyl covered MDF wall paneling on three of the compartment walls increased the peak heat release rate to 12 MW, although most of the increased energy release occurred outside of the compartment opening. In each experiment during post flashover exposure, the insulation on the cords ignited and burned through, exposing bare conductor. During this period the circuits faulted. The circuit protection devices are not designed to provide thermal protection, and, thus, were installed remote from the fire. The devices operated as designed in all experiments. All of the circuit faults resulted in either a magnetic trip of the conventional circuit breaker or a ground-fault trip in the GFCI or AFCI capable circuit protection devices. Though not required by UL 1699, Standard for Safety for Arc-Fault Circuit-Interrupters as the solution for detection methodology, the AFCIs used had differential current detection. Examination of signal data showed that the only cord types that tripped with a fault to ground were the insulated conductors in non-metallic sheathed cables (12-2 NM-B and 12-3 NM-B). This was expected due to the bare grounding conductor present. Assessments of both the thermal exposure and physical damage to the cords did not reveal any correlation between the thermal exposure, cord damage, and trip type.

APA, Harvard, Vancouver, ISO, and other styles

2

Johnson, Jay Dean, Armando J. Fresquez, Bob Gudgel, and Andrew Meares. Series and parallel arc-fault circuit interrupter tests. Office of Scientific and Technical Information (OSTI), July 2013. http://dx.doi.org/10.2172/1092992.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Subudhi, M., W. Shier, and E. MacDougall. Age-related degradation of Westinghouse 480-volt circuit breakers. Office of Scientific and Technical Information (OSTI), July 1990. http://dx.doi.org/10.2172/7028755.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Biswas, Gautam, Daniel Schwartz, Bharat Bhuva, John Bransford, and Daniel Holton. Assessing Problem Solving Skills in Understanding and Troubleshooting AC Circuits. Fort Belvoir, VA: Defense Technical Information Center, December 2001. http://dx.doi.org/10.21236/ada401285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Winslow, Joshua. Circuitry Design for ChIMES AC Drive Coil. Office of Scientific and Technical Information (OSTI), November 2020. http://dx.doi.org/10.2172/1808487.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Johnson, Jay Dean, Scott S. Kuszmaul, Jason E. Strauch, and David Alan Schoenwald. Creating dynamic equivalent PV circuit models with impedance spectroscopy for arc-fault modeling. Office of Scientific and Technical Information (OSTI), June 2011. http://dx.doi.org/10.2172/1020514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mei, Ting, Andy Huang, Heidi Thornquist, Peter Sholander, and Jason Verley. Prediction of Circuit Response to an Electromagnetic Environment; ASC IC FY20 Milestone 7179. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1663259.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Martzloff, Francois D. Surge protection in low-voltage AC power circuits - an anthology, part 1 - annotated bibliography. Gaithersburg, MD: National Institute of Standards and Technology, 2001. http://dx.doi.org/10.6028/nist.ir.6714-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

TOWNE, C. M. SHORT CIRCUIT COORDINATION STUDY & ARC FLASH EVALUATION FOR LIQUID PROCESSING & CAPSULE STORAGE 310 FACILITY. Office of Scientific and Technical Information (OSTI), December 2003. http://dx.doi.org/10.2172/821674.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Martzloff, Francois D. Surge protection in low-voltage AC power circuits - an anthology, part 2 - development of standards reality checks. Gaithersburg, MD: National Institute of Standards and Technology, 2002. http://dx.doi.org/10.6028/nist.ir.6714-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!