Books on the topic 'Aerospace systems design'

Kumar, S. Kishore, Indira Narayanaswamy, and V. Ramesh, eds. Design and Development of Aerospace Vehicles and Propulsion Systems. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9601-8.

Albers, James A. NASA Ames Aerospace Systems Directorate research. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1991.

Kodiyalam, S. Multidisciplinary aerospace systems optimization, computational aerosciences (CAS) project. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 2001.

Engineers, Society of Automotive, ed. Aerospace environmental systems: Proceedings of the Sixteenth ICES conference. Warrendale, PA: Society of Automotive Engineers, 1986.

Bement, Laurence J. A manual for pyrotechnic design, development and qualification. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Mishkin, A. H. Space-based multifunctional end effector systems: Functional requirements and proposed designs. Pasadena, Calif: National Aeronautics and Space Administration, Jet Propulsion Laboratory, California Institute of Technology, 1988.

Voigt, Robert G. Requirements for multidisciplinary design of aerospace vehicles on high performance computers. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Malone, J. B. The design of future airbreathing engine systems within an intelligent synthesis environment. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Malone, J. B. The design of future airbreathing engine systems within an intelligent synthesis environment. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

Concurrent Design and Manufacture of Aerospace Transmission Systems (Conference) (1998 Derby (England)). Aerospace transmission systems: Concurrent design and manufacture : 20 May 1998, Rolls-Royce, Derby, UK. Bury St. Edmunds: Professional Engineering, 1998.

Engineers, Society of Automotive. Quality systems, aerospace, model for quality assurance in design, development, production, installation and servicing. Warrendale, Pa: SAE International, 1999.

Western Electronic Show and Convention (1998 Anaheim, Calif.). Wescon/98: Systems-on-a-chip - next generation IP networks, chip-level design, system design, embedded systems, aerospace applications, quality/reliability/test, EDA, system environment, system interface, wireless system design, network system design, bio-medical systems : conference proceedings : Anaheim Convention Center, Anaheim, California, September 15-17, 1998. [New York]: Institute of Electrical and Electronics Engineers, 1998.

Ryan, Robert S. The role of structural dynamics in the design and operations of space systems: The history, the lessons, the technical challenges of the future. [Washington, DC: National Aeronautics and Space Administration, 1994.

SAE Aerospace Manufacturing Technology Conference (1998 Long Beach, Calif.). Proceedings of the 1998 Aerospace Manufacturing Technology Conference. Warrendale, PA: Society of Automotive Engineers, 1998.

Dyer, J. E. Development of a verification program for deployable truss advanced technology. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Aerospace Behavioral Engineering Technology Conference (6th 1987 Long Beach, Calif.). Sixth Aerospace Behavioral Engineering Technology Conference proceedings: "human/computer technology : who's in control?". Warrendale, PA: Society of Automotive Engineers, 1988.

Dubowsky, Steven. Final report of a research program on the design, planning, and control of robotic systems in space. [Washington, DC: National Aeronautics and Space Administration, 1996.

Roskam, Jan. Design, analysis and control of large transports so that control of engine thrust can be used as a back-up of the primary flight controls: Final technical report, grant #NAG 2-789. Lawrence, Kan: University of Kansas, Center for Research, Inc., 1995.

Aerospace, Behavioral Engineering Technology Conference (5th 1986 Long Beach Calif ). Fifth Aerospace Behavioral Engineering Technology Conference proceedings: "human integration technology, the cornerstone for enhancing human performance". Warrendale, PA: Society of Automotive Engineers, 1987.

name, No. MEMS components and applications for industry, automobiles, aerospace, and communication II: 28-29 January 2003, San Jose, California, USA. Bellingham, WA: SPIE, 2003.

Benzaouia, Abdellah. Saturated Switching Systems. London: Springer London, 2012.

Liu, Jinkun. Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012.

NASA Workshop on Distributed Parameter Modeling and Control of Flexible Aerospace Systems (1992 Williamsburg, Va.). NASA Workshop on Distributed Parameter Modeling and Control of Flexible Aerospace Systems: Proceedings of a workshop sponsored by the National Aeronautics and Space Administration, Washington, D.C. and held in Williamsburg, Virginia, June 8-10, 1992. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

Engineers, Society of Automotive, and Aerospace Technology Conference & Exposition (1988 : Anaheim, Calif.), eds. Proceedings of the Seventh Aerospace Behavioral Technology Conference: Operational information transfer technology : are we designing for the human operator? Warrendale, PA: Society of Automotive Engineers, 1989.

Shirley, Morgan, ed. Air travel and health: A systems perspective. Chichester, U.K: John Wiley & Sons, 2010.

Andreychikov, Aleksandr, and Ol'ga Andreychikova. Intelligent information systems and artificial intelligence methods. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1009595.

Hajiyev, Chingiz. Fault diagnosis and reconfiguration in flight control systems. Boston: Kluwer Academic Publishers, 2003.

Shaltens, Richard K. Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications. [Washington, D.C.?: National Aeronautics and Space Administration], 1990.

Miele, Angelo, and Aldo Frediani. Advanced Design Problems in Aerospace Engineering : Volume 1: Advanced Aerospace Systems. Springer London, Limited, 2006.

Miele, Angelo, and Aldo Frediani. Advanced Design Problems in Aerospace Engineering : Volume 1: Advanced Aerospace Systems. Springer, 2010.

Roskam, Jan. Airplane Design: Layout Design of Landing Gear & Systems. Design Analysis & Research, 2000.

R, Whitley M., Knight K. C, and George C. Marshall Space Flight Center., eds. Comprehensive design reliability activities for aerospace propulsion systems. [Marshall Space Flight Center], Ala: National Aeronautics and Space Administration, Marshall Space Flight Center, 2000.

Facility, Dryden Flight Research, ed. Aerospace Energy Systems Laboratory: Requirements and design approach. Edwards, Calif: National Aeronautics and Space Administration, Ames Research Center, Dryden Flight Research Facility, 1988.

R, Whitley M., Knight K. C, and George C. Marshall Space Flight Center., eds. Comprehensive design reliability activities for aerospace propulsion systems. [Marshall Space Flight Center], Ala: National Aeronautics and Space Administration, Marshall Space Flight Center, 2000.

Aerospace Transmission Systems (IMechE Seminar Publication). Wiley, 1998.

T, Leondes Cornelius, ed. Integrated technology methods and applications in aerospace systems design. San Diego: Academic Press, 1992.

Integrated Technology Methods and Applications in Aerospace Systems Design. Elsevier, 1992. http://dx.doi.org/10.1016/b978-0-12-012752-8.x5001-6.

AGMA Aerospace Gearing Committee. AGMA 911-B21, Design Guidelines for Aerospace Gear Systems. American Gear Manufacturers Association, 2021.

Center, Ames Research, ed. NASA Ames Aerospace Systems Directorate research. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1991.

Sabatini, Roberto. Aerospace Sensors and Integrated Systems: Design, Development, Test and Evaluation. Taylor & Francis Group, 2023.

National Aeronautics and Space Administration (NASA) Staff. Research and Development of Rapid Design Systems for Aerospace Structure. Independently Published, 2018.

Exergy Analysis And Design Optimization For Aerospace Vehicles And Systems. AIAA (American Institute of Aeronautics & Ast, 2011.

Aerospace environmental systems: Proceedings of the Sixteenth ICES conference. Society of Automotive Engineers, 1986.

United States. National Aeronautics and Space Administration., ed. Human-centered design of human-computer-human dialogs in aerospace systems. [Washington, DC: National Aeronautics and Space Administration, 1994.

United States. National Aeronautics and Space Administration., ed. Human-centered design of human-computer-human dialogs in aerospace systems. [Washington, DC: National Aeronautics and Space Administration, 1994.

United States. National Aeronautics and Space Administration., ed. Human-centered design of human-computer-human dialogs in aerospace systems. [Washington, DC: National Aeronautics and Space Administration, 1994.

Jet Propulsion Laboratory (U.S.), ed. Space-based multifunctional end effector systems: Functional requirements and proposed designs. Pasadena, Calif: National Aeronautics and Space Administration, Jet Propulsion Laboratory, California Institute of Technology, 1988.

Calif.) Western Electronic Show and Convention (1998 : Anaheim. Wescon/98: Systems-On-A-Chip - Next Generation Ip Networks, Chip-Level Design, System Design, Embedded Systems, Aerospace Applications, Quality/Reliability/Test,. Institute of Electrical & Electronics Enginee, 1998.

Proceedings of the 2002 Aerospace Manufacturing Technology Conference. Society of Automotive Engineers Inc, 2002.

(Editor), Angelo Miele, and Aldo Frediani (Editor), eds. Advanced Design Problems in Aerospace Engineering: Volume 1: Advanced Aerospace Systems (Mathematical Concepts and Methods in Science and Engineering). Springer, 2004.