Books on the topic 'Adhesive joints'

Possart, Wulff, and Markus Brede, eds. Adhesive Joints. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2018. http://dx.doi.org/10.1002/9783527803743.

da Silva, Lucas F. M., Alessandro Pirondi, and Andreas Öchsner, eds. Hybrid Adhesive Joints. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-16623-5.

da Silva, Lucas F. M., David A. Dillard, Bamber Blackman, and Robert D. Adams, eds. Testing Adhesive Joints. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527647026.

Adams, Robert D. Structural adhesive joints in engineering. 2nd ed. London: Chapman & Hall, 1997.

S, Zenkin A., Tovarystvo "Znanni͡a︡" Ukraïny, and Ukraïnsʹkyĭ budynok ekonomichnykh ta naukovo-tekhnichnykhn znanʹ., eds. Primenenie kleevykh kompozit͡s︡iĭ v narodnom khozi͡a︡ĭstve Ukrainy: Tezisy dokladov konferent͡s︡ii, 24-26 mai͡a︡ 1994 goda, g. Evpatorii͡a︡. Kiev: Ob-vo "Znanie" Ukrainy, 1994.

Freĭdin, Anatoliĭ Semenovich. Svoĭstva i raschet adgezionnykh soedineniĭ. Moskva: "Khimii͡a︡", 1990.

1935-, Wightman James P., and Langley Research Center. Materials Division., eds. Fracture surface analysis in composite and titanium bonding: Final technical report. Blacksburg, VA: Chemistry Dept., Virginia Polytechnic Institute & State University, 1985.

Messler, Robert W. Integral mechanical attachment: A resurgence of the oldest method of joining. Burlington, MA: Butterworth-Heinemann, 2006.

Plausinis, Derek. Time-dependent fracture of adhesive joints. Ottawa: National Library of Canada, 1994.

Mittal, Kash L. Adhesive Joints: Formation, Characteristics and Testing. London: CRC Press, 2023. http://dx.doi.org/10.1201/9780429070709.

Lanting, Henry Albert. Predicting shear failure of adhesive joints. Ottawa: National Library of Canada, 1995.

Lucas Filipe Martins da Silva. Advances in numerical modeling of adhesive joints. Heildelberg: Springer, 2012.

Duff, John E. Durability and dimensional stability of COM-PLY joists determined by accelerated aging test. [Asheville, N.C.]: U.S. Dept. of Agriculture, Forest Service, Southeastern Forest Experiment Station, 1985.

Messler, Robert W. Integral mechanical attachment: A resurgence of the oldest method of joining. Burlington, MA: Butterworth-Heinemann/Elsevier, 2006.

Johan, Liu, ed. Conductive adhesives for electronics packaging. Isle of Man, British Isles: Electrochemical Publications Ltd., 1999.

Mittal, K. L., and S. Kumar. Advances in modeling and design of adhesively bonded systems. Hoboken, New Jersey: Scrivener Publishing/Wiley, 2013.

American Society of Mechanical Engineers. Winter Meeting. Advances in adhesively bonded joints: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Ill., November 27-December 2, 1988. New York: ASME, 1988.

European Mechanics Colloquium (227 1987 Saint-Etienne, Loire, France). Mechanical behaviour of adhesive joints: Proceedings of the European Mechanics Colloquium 227, held in Saint-Etienne, France, 31 August-2 Septembre 1987. Paris: Pluralis, 1987.

Veselovskiĭ, R. A. Regulirovanie adgezionnoĭ prochnosti polimerov. Kiev: Nauk. dumka, 1988.

S, Mall, Liechti K. M, Vinson Jack R. 1929-, American Society of Mechanical Engineers. Materials Division., and American Society of Mechanical Engineers. Winter Meeting, eds. Advances in adhesively bonded joints: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988. New York, N.Y. (345 E. 47th St., New York 10017): ASME, 1988.

F, Erdogan, and Langley Research Center, eds. Elasticity solution of an adhesively bonded cover plate of various geometries. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1985.

Hitch, D. An analysis of adhesive-bonded coaxil joints. Oxford: Oxford Polytechnic, 1986.

Fernlund, Göran. Quasi-static failure of structural adhesive joints. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1991.

da Silva, Lucas Filipe Martins, and Raul D. S. G. Campilho. Advances in Numerical Modeling of Adhesive Joints. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-23608-2.

da Silva, Lucas F. M., and Chiaki Sato, eds. Design of Adhesive Joints Under Humid Conditions. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-37614-6.

Papini, Marcello. Fracture load prediction of structural adhesive joints. Ottawa: National Library of Canada, 1993.

Tu, Yijun. Water absorption and degradation in adhesive joints. Ottawa: National Library of Canada, 1999.

Goddard, T. J. Through adhesive surface treatment for bonded joints. Oxford: Oxford Polytechnic, 1989.

S, Johnson W., ASTM Committee D-14 on Adhesives., and International Symposium on Adhesively Bonded Joints: Testing, Analysis, and Design (1986 : Baltimore, Md.), eds. Adhesively bonded joints: Testing, analysis, and design. Philadelphia, PA: ASTM, 1988.

1942-, Moody R. C., Falk Robert H, and Forest Products Laboratory (U.S.), eds. Fiber stress values for design of glulam timber utility structures. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1995.

Weitzenböck, Jan R. Adhesives in marine engineering. Oxford: Woodhead Pub., 2012.

Kuczmaszewski, Józef. Fundamentals of metal-metal adhesive joint design. Lublin: Lublin University of Technology, 2006.

Steidler, Silvana M. Structural modelling of adhesive joints in automotive bodies. Oxford: Oxford Brookes University, 2000.

Al-Qazzaz, Khaled. Buckling failure in adhesive joints under bending loads. Ottawa: National Library of Canada, 2003.

Breuel, Gerhard. Untersuchungen zum Alterungsverhalten von Kunststoff-Stahl-Klebverbindungen. München: H. Vogel, 1988.

Institution of Structural Engineers (Great Britain), ed. Guide to the structural use of adhesives. London: Institution of Structural Engineers, 1999.

Jasieńko, Jerzy. Połączenia klejowe w rehabilitacji i wzmacnianiu drewnianych belek zginanych. Wrocław: Oficyna Wydawnicza Politechniki Wrocławskiej, 2001.

Center, Langley Research, ed. Materials research for High Speed Civil Transport and generic hypersonics: Adhesive durability. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Vintilescu, Ion Virgil. Mixed-mode I-II-III fracture of adhesive joints. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1999.

Safavi-Ardebili, Vahid. Micromechanical characterization of the interphase zone in adhesive joints. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1998.

Petry, Markus. Systematik zur Entwicklung eines modularen Programmbaukastens für robotergeführte Klebeprozesse. Berlin: Springer-Verlag, 1992.

Petrova, A. P. Skleivanie instrumenta i osnastki v mashinostroenii. Moskva: "Mashinostroenie", 1985.

Brockmann, W. Kleben von Kunststoff mit Metall. Berlin: Springer-Verlag, 1989.

Erol, Sancaktar, American Society of Mechanical Engineers. Design Engineering Division., and International Mechanical Engineering Congress and Exposition (1995 : San Francisco, Calif.), eds. Reliability, stress analysis, and failure prevention issues in emerging technologies and materials: Presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York: American Society of Mechanical Engineers, 1995.

Cook, Ronald A. Adhesive anchors in concrete under sustained loading conditions. Washington, D.C: Transportation Research Board, 2009.

Erol, Sancaktar, American Society of Mechanical Engineers. Design Engineering Division., and International Mechanical Engineering Congress and Exposition (2000 : Orlando, Fla.), eds. Reliability, stress analysis, and failure prevention issues: Presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida. New York, N.Y: American Society of Mechanical Engineers, 2000.

Cheng, Jinquan. Smart adhesively bonded composite joints: Analysis and design. Hauppauge, NY, USA: Nova Science, 2009.

Erol, Sancaktar, American Society of Mechanical Engineers. Design Engineering Division., and International Mechanical Engineering Congress and Exposition (1999 : Nashville, Tenn.), eds. Reliability, stress analysis, and failure prevention issues in adhesive and bolted connections: Presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee. New York, N.Y: American Society of Mechanical Engineers, 1999.

Akhavan-Safar, Alireza, Eduardo A. S. Marques, Ricardo J. C. Carbas, and Lucas F. M. da Silva. Cohesive Zone Modelling for Fatigue Life Analysis of Adhesive Joints. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-93142-1.

Mittal, K. L., and S. K. Panigrahi, eds. Structural Adhesive Joints. Wiley, 2020. http://dx.doi.org/10.1002/9781119737322.