Dissertations / Theses on the topic '62-1'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 36 dissertations / theses for your research on the topic '62-1.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Frass, Johannes. "Kapazitätsanalyse von Hinterlandverbindungen ausgewählter europäischer Seehäfen." Institut für Transportwirtschaft und Logistik, WU Vienna University of Economics and Business, 2006. http://epub.wu.ac.at/62/1/document.pdf.
Full textSeries: Schriftenreihe des Instituts für Transportwirtschaft und Logistik - Verkehr
Lalonde, Jean-François. "Contribution aux techniques de mesure des contraintes résiduelles des pièces brutes et usinées par diffraction aux neutrons." Mémoire, École de technologie supérieure, 2009. http://espace.etsmtl.ca/62/1/LALONDE_Jean%2DFran%C3%A7ois.pdf.
Full textBERTRAND, SYLVIE. "Etude critique de la valvuloplastie aortique : suivi hemodynamique et doppler sur 1 an de 62 patients consecutifs." Amiens, 1989. http://www.theses.fr/1989AMIEM106.
Full textTaube, Markus. "Erscheinungsformen und Bestimmungsgründe makroökonomischer Zyklen in der VR China : Planungs-, Transformations-, Konjunkturzyklen ; Teil. 1 - Duisburger Papiere zur Ostasienwirtschaft ; 62 (2002)." Gerhard-Mercator-Universitaet Duisburg, 2003. http://www.ub.uni-duisburg.de/ETD-db/theses/available/duett-05052003-152132/.
Full textPaloheimo, Ville. "Vad hände med barnen som föddes på Stora Bondegatan 1 i Stockholm åren 1872 - 1873 : En studie av 62 barn." Thesis, Karlstads universitet, Fakulteten för humaniora och samhällsvetenskap (from 2013), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-83732.
Full textSingh, Aishwarya [Verfasser]. "Characterization of polygalacturonase inhibitor 1-like protein (CpPGIP) from Craterostigma plantagineum and analysis of stress inducible pcC13-62 promoters to understand desiccation tolerance in Linderniaceae / Aishwarya Singh." Bonn : Universitäts- und Landesbibliothek Bonn, 2020. http://d-nb.info/1219140341/34.
Full textFritzenwanker, Moritz [Verfasser]. "Genomsequenz des probiotischen Enterococcus faecalis Symbioflor 1 (DSM 16431) und vergleichende Genomanalyse mit den Stämmen E. faecalis V583, E. faecalis OG1RF und E. faecalis 62 / Moritz Fritzenwanker." Gießen : Universitätsbibliothek, 2013. http://d-nb.info/1065320566/34.
Full textLeón, Vargas Fabian Mauricio. "Design and implementation of a closed-loop blood glucose control system in patients with type 1 diabetes." Doctoral thesis, Universitat de Girona, 2013. http://hdl.handle.net/10803/125007.
Full textEn aquesta investigació, es desenvolupen estratègies de control en llaç obert i llaç tancat encaminades a superar els principals problemes de control de glucosa al període postprandial. Es va desenvolupar un nou algoritme de control basat en models en llaç obert amb tecnologia d'inversió de conjunts. Aquest coordina automàticament els valors d'insulina basal-bol d'una manera eficient per tal d'aconseguir certs objectius de control predefinits. L'algoritme va ser dissenyat per permetre la seva integració en bombes d'insulina intel•ligents. També, es van implementar estratègies de regulació en llaç tancat basades en tècniques de control en mode lliscant i limitacions de la insulina a bord, per reduir el risc d'episodis d'hipoglucèmia tardana per tal d'aconseguir un acompliment més segur sense augmentar el temps a hiperglucèmia. La robustesa dels controladors va ser demostrada mitjançant una àmplia avaluació i validació en un entorn virtual integral específicament dissenyat i implementat en aquesta tesi per permetre simulacions realistes
Roy, Marilyne. "DEVENIR SERVITEUR DE LA PAROLE: Une anthropologie de la réception de la parole à la lumière d'une lecture sémiotique du récit de la dernière Cène (Luc 22, 1-62)." Thesis, Université Laval, 2011. http://www.theses.ulaval.ca/2011/28340/28340.pdf.
Full textHubert, Pascale. "Tyrosine phosphorylation et association à la phospholipase C Gamma-1 de la protéine de 62 KD liée à Gap après stimulation de la molécule CD2 des cellules T Jurkat." Paris 7, 1993. http://www.theses.fr/1993PA07B070.
Full text長谷川, 弘. "1.「高3国語表現」の学習指導 : 62年度の実践とその反省(国語科)(教科研究)." 名古屋大学教育学部附属中学校 : 名古屋大学教育学部附属高等学校, 1988. http://hdl.handle.net/2237/4863.
Full textДідух, Віктор Васильович. "Холодильник колосниковий з модернізацією колосників." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/30732.
Full textThe object of study is air-cooling machines in the cement manufacturing process. Subject of study - grate refrigerator. The aim of the master's thesis is to study the purpose, design and principle of operation of the grate fridge, its advantages and disadvantages, and the choice of the grate modernization option to improve its work is justified. In the master's thesis, a description of the design and operation principle of the grate refrigerator, the technological line in which this machine is used, the advantages and disadvantages of the grate refrigerator, literature and patent searches, and the design option of the grate refrigerator for the purpose of its modernization are selected and the calculations confirming the efficiency of the refrigerator are performed grate. The proposed modernized design of the grate will allow to limit the surface area of the grate, which is directly affected by the hot material, will reduce the temperature loads on the surface of the grate and increase the wear resistance of their surface. Also, in the master's thesis, sections on installation and operation technology, a startup project and labor protection were completed, I will confirm the feasibility of operating a grate refrigerator.
Лук'яненко, Ігор Анатолійович. "Лінія розливу миючих засобів у ПЕТ-пляшки з модернізацією вузла розливу." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/30721.
Full textIn the course of the Master's thesis, the technological line of bottling detergents in PET bottles was selected. The design, principle of operation and characteristics of the bottling machine and the line as a whole are studied. In the master's thesis parametric and kinematic calculations were performed. The spring was calculated. In order to eliminate the disadvantages of the dispenser, namely, the low speed of the spill, the complexity of the design of the spill node, low accuracy of dosing was conducted patent-literature review of the design. The result was a prototype design of the filling device, which is placed directly in the flow tank and has a simplified design, which allows to increase productivity and reduce the cost of repair and maintenance of the machine as a whole. To confirm the upgrade, 3D models were developed in the SolidWorks environment of the base and upgraded units, and their calculation was performed in the ANSYS environment. The following sections were also completed: installation and operation, automation, labor protection, and a startup project was developed.
村上, 英治. "<彙報>この 1 年の歩み(昭和 61 年から昭和 62 年にかけて)(教育心理学教室教官の研究状況報告)." 名古屋大学教育学部, 1987. http://hdl.handle.net/2237/3757.
Full textPalacín, Mateo Manuel. "The Internet ecosystem: a traffic measurement analysis." Doctoral thesis, Universitat Pompeu Fabra, 2015. http://hdl.handle.net/10803/326736.
Full textEl análisis de las interconexiones entre proveedores de contenidos y operadores de Internet es esencial para entender la evolución del ecosistema de Internet. En los últimos años hemos sido testigos de un espectacular crecimiento del tráfico multimedia que ha llevado tanto a los proveedores de contenidos como a los operadores a replantearse sus modelos de interconexión. En esta tesis se realiza un análisis del tráfico de Internet des de dos perspectivas. Primero, se analiza el tráfico desde una perspectiva de los protocolos. Gracias al análisis de los protocolos se observa cómo ha cambiado el tráfico debido a la irrupción de nuevas aplicaciones y al incremento de la demanda de Internet. Segundo, se han realizado medidas que nos permite evaluar la conectividad entre diferentes operadores y proveedores de contenidos. El análisis de estos datos nos permite identificar correlaciones entre los diferentes modelos de interconexión que utilizan los operadores.
Champion, Patrick D. "An analysis of Fourier transform infrared spectroscopy data to predict herpes simplex virus 1 infection." Atlanta, Ga. : Georgia State University, 2008. http://digitalarchive.gsu.edu/math_theses/62/.
Full textTitle from title page (Digital Archive@GSU, viewed July 29, 2010) Yu-Sheng Hsu, committee chair; Gary Hastings, Jun Han, committee members. Includes bibliographical references (p. 41).
Grubbs, Emily. "Management of Type 1 Diabetes: A Family Affair." Digital Commons @ East Tennessee State University, 2020. https://dc.etsu.edu/secfr-conf/2020/schedule/62.
Full textGriebel, Wolfgang [Verfasser], Ulrich L. [Gutachter] Rohde, Matthias [Gutachter] Rudolph, and Ignaz [Gutachter] Eisele. "Space Qualified 5MHz Crystal Oscillators with Maximum Stability between 1 and 10 Seconds / Wolfgang Griebel ; Gutachter: Ulrich L. Rohde, Matthias Rudolph, Ignaz Eisele." Cottbus : BTU Cottbus - Senftenberg, 2021. http://d-nb.info/1235405273/34.
Full textRoppel, Carsten. "Grundlagen der digitalen Kommunikationstechnik Übertragungstechnik - Signalverarbeitung - Netze ; mit 42 Tabellen und 62 Beispielen." München Wien Fachbuchverl. Leipzig im Carl-Hanser-Verl, 2006. http://deposit.ddb.de/cgi-bin/dokserv?id=2712979&prov=M&dok_var=1&dok_ext=htm.
Full textРуденко, Павло Андрійович. "Технологічне забезпечення токарного оброблення деталей складної конструкції." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/30836.
Full textStructure and scope of work. The master's thesis includes an introduction, 4 sections, general conclusions, a list of used literature. The work consists of 96 pages of text, 21 tables, 43 drawings and 10 literary sources. Actuality of theme. For modern production, one of the most important aspects is the time of machining of parts, because this direction has an impact on the economic component. For the manufacturing of components for lower limb prostheses, time is the main problem because parts are sold through a tender that has certain time limits for execution. Therefore, the author had to provide recommendations for reducing operating time by 20%. The purpose and objectives of the study. To analyze the existing method of manufacturing a part of complex construction "Hull". Analyze and provide recommendations for the modernization of the technological process through the use of modern technological equipment. Investigate, optimize, and deploy new production tools. The object of study - is the technological process of manufacturing the module of the shin of the adjustable-connecting node, which has a complex design. The subject of the study- is the reduction of operating time for the manufacture of one part. Research methods: familiarization and analysis of the technological process, investigation of the problems of the technological system used, analysis of the catalogs of leading equipment manufacturing companies to obtain complete information on the use of modern technologies, the study of equipment operating modes to be able to make optimization recommendations. Scientific novelty of the obtained results: 1. Investigation of the recommended operating modes of technological equipment on the example of a working production, optimization of these modes and establishment of an error for its further use when introducing new equipment. 2. Development of a universal method for determining the coordinates of the axis of the cutting tool when using gearboxes with a rotating angle of the spindle axis and its implementation in real production. The practical significance of the results obtained. The obtained results were implemented at the production of the enterprise of DO"Impulse" Co., Ltd and are fully used in the working process. There is a production certificate on which the results of work are implemented. A copy of the experimental study is also available to confirm the workability of the results.
Структура и объем работы. В магистерскую диссертацию входить введение, 4 главы, выводы, список использованной литературы. Работа состоит из 96 страниц текста, 21 таблиц, 43 рисунков и 10 литературных источников. Актуальность темы. Для современного производства одним из важнейших аспектов есть время обработки деталей, потому что это напрямую влияет на экономическую составляющию. Для производства которое производит составляющие для протезов нижних конечностей, время является самой главной проблемою из-за того, что реализация деталей происходит за счет проведения тендера у которого есть определенные сроки времени на выполнение. Поэтому автору необходимо было предоставить рекомендации для сокращения операционного времени на 20%. Цель и задачи исследования. Проанализировать имеющийся метод изготовления детали сложной конструкции «Корпус». Проанализировать и предоставить рекомендации по модернизации технологического процесса за счет использование современного технологического оборудования. Иследовать, оптимизировать, и внедрить в работу новые средства производства. Объект исследования - технологический процесс изготовления модуля голени регулировано-соединительного узла который имеет слжную конструкцию. Предмет исследования - сокращение операционного времени для изготовления одной детали. Методы исследования: Ознакомление и анализ технологического процесса, исследования возникновение проблем технологической системы которая используется, анализ каталогов ведущих компаний по производству оснастки для получение полной информации использование современных технологий, исследования режимов работы оборудования для возможности сделать рекомендации по оптимизации. Научная новизна полученных результатов: 1. Исследование рекомендованных режимов работы технологического оборудования на примере работающего производства, оптимизация этих режимов и установления погрешности для дальнейшего ее использование при внедрении нового оснащения. 2. Разработка универсального метода определения координат оси инструмента во время использование редукторов с поворотным углом оси шпинделя и его внедрение в условиях реального производства. Практическое значение полученных результатов. Полученные результаты были внедрены на производстве предприятия ООО «КБ« Импульс »и в полную меру используются в рабочем процессе. В наличии есть справка от производства на котором внедрены результаты работы. Также в наличии имеется экземпляр экспериментального исследования для подтверждения работоспособности результатов.
Ferrell, Natasha Shantel. "Evaluating the relationship between treatment integrity, social acceptability, and behavior outcomes within a school-wide positive behavior support system." Diss., UC access only, 2009. http://proquest.umi.com/pqdweb?index=62&did=1905733931&SrchMode=1&sid=1&Fmt=2&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1270228113&clientId=48051.
Full textIncludes abstract. Includes bibliographical references (leaves 63-71). Issued in print and online. Available via ProQuest Digital Dissertations.
Abu-Rmileh, Amjad Hisham Ahmad. "Control and modeling techniques in biomedical engineering: the artificial pancreas for patients with type 1 diabetes." Doctoral thesis, Universitat de Girona, 2013. http://hdl.handle.net/10803/127272.
Full textEsta tesis presenta diferentes estrategias de control para el páncreas artificial, que se basan en control predictivo basado en modelo (MPC) y el control por modo deslizante (SMC). Múltiples MPC con modelos lineales y planificación de ganancia, y SMC con modelos lineales y no lineales, se han desarrollado. Las estrategias de control propuestas combinan más de un método (lineal y/o no lineal) de control y modelado en cada estructura. La idea principal detrás de estos enfoques combinados es hacer uso de las virtudes de cada enfoque al tiempo que se reducen los efectos de sus desventajas. Las estrategias de control han sido probadas y validadas en simulaciones (validación in-silico). Para los ensayos in-silico, dos modelos matemáticos se han utilizado, simulando los pacientes con diabetes mellitus tipo 1. Las estrategias de control se ensayan en diferentes condiciones, tales como la presencia de perturbación por ingesta de comida, y variabilidad de paciente
Ahlen, Karl. "End depth and flow relationships for smooth open trapezoidal and circular channels." Thesis, 1994. http://spectrum.library.concordia.ca/62/1/MM90814.pdf.
Full textRehfeld, Heiko. "Statistische Analyse und semiklassische Beschreibung von supraleitenden Limaçon-Billards und Raysplitting in supraleitenden Mikrowellenbillards." Phd thesis, 2000. http://tuprints.ulb.tu-darmstadt.de/62/1/rehfeld.pdf.
Full textMuwanga-Zake, Johnnie Wycliffe Frank. "Research portfolio." Thesis, 1998. http://eprints.ru.ac.za/2316/1/MUWANGA-ZAKE-MEd-TR99-62.pdf.
Full textPires, Tiago Emanuel Garcia. "A Flexibilização Processual no âmbito do procedimento de Injunção e da AECOP." Master's thesis, 2020. http://hdl.handle.net/10316/92666.
Full textUm dos mais clássicos problemas com os quais a atividade dos tribunais se tem deparado ao longo dos anos é, sem dúvida, o excesso de burocracia que tende a perpetuar um ciclo vicioso de ineficiência na atribuição de uma resposta célere, indispensável ao bom funcionamento da vida prática. Ora, perante esta constatação não são, de todo, raros no nosso sistema procedimentos simplificados que visam fazer isso mesmo: dar uma resposta tempestiva de forma a que uma futura decisão tenha efeito útil. Neste âmbito, iremos analisar o regime legal da Injunção e da AECOP, mais concretamente, os pressupostos para o recurso a estes e os diversos problemas que têm surgido na prática relativos à sua aplicação em concreto.Um dos mais clássicos problemas com os quais a atividade dos tribunais se tem deparado ao longo dos anos é, sem dúvida, o excesso de burocracia que tende a perpetuar um ciclo vicioso de ineficiência na atribuição de uma resposta célere, indispensável ao bom funcionamento da vida prática. Ora, perante esta constatação não são, de todo, raros no nosso sistema procedimentos simplificados que visam fazer isso mesmo: dar uma resposta tempestiva de forma a que uma futura decisão tenha efeito útil. Neste âmbito, iremos analisar o regime legal da Injunção e da AECOP, mais concretamente, os pressupostos para o recurso a estes e os diversos problemas que têm surgido na prática relativos à sua aplicação em concreto.Um dos mais clássicos problemas com os quais a atividade dos tribunais se tem deparado ao longo dos anos é, sem dúvida, o excesso de burocracia que tende a perpetuar um ciclo vicioso de ineficiência na atribuição de uma resposta célere, indispensável ao bom funcionamento da vida prática. Ora, perante esta constatação não são, de todo, raros no nosso sistema procedimentos simplificados que visam fazer isso mesmo: dar uma resposta tempestiva de forma a que uma futura decisão tenha efeito útil. Neste âmbito, iremos analisar o regime legal da Injunção e da AECOP, mais concretamente, os pressupostos para o recurso a estes e os diversos problemas que têm surgido na prática relativos à sua aplicação em concreto.
One of the most classic problems that the activity of the courts have faced over the years is undoubtedly the excess of bureaucracy that tends to perpetuate a vicious cycle of inefficiency in the attribution of a quick response, indispensable to the smooth functioning of day-to-day life. However, in view of this observation, simplified procedures that aim to do this are not at all rare in our system: providing a timely response so that a future decision has a useful effect. In this context, we will analyze the legal regime of Injunction and AECOP, more specifically, the legal requirements for the use of these and the various problems that have arisen in practice regarding their specific application.One of the most classic problems that the activity of the courts have faced over the years is undoubtedly the excess of bureaucracy that tends to perpetuate a vicious cycle of inefficiency in the attribution of a quick response, indispensable to the smooth functioning of day-to-day life. However, in view of this observation, simplified procedures that aim to do this are not at all rare in our system: providing a timely response so that a future decision has a useful effect. In this context, we will analyze the legal regime of Injunction and AECOP, more specifically, the legal requirements for the use of these and the various problems that have arisen in practice regarding their specific application.One of the most classic problems that the activity of the courts have faced over the years is undoubtedly the excess of bureaucracy that tends to perpetuate a vicious cycle of inefficiency in the attribution of a quick response, indispensable to the smooth functioning of day-to-day life. However, in view of this observation, simplified procedures that aim to do this are not at all rare in our system: providing a timely response so that a future decision has a useful effect. In this context, we will analyze the legal regime of Injunction and AECOP, more specifically, the legal requirements for the use of these and the various problems that have arisen in practice regarding their specific application.
Πέττα, Ευρυδίκη. "Μορφολογική εκτίμηση της έκφρασης του μεταγραφικού παράγοντα PPARγ και της συνομιλίας του (cross-talk) με το μεταγραφικό παράγοντα AP-1 κατά τη διαδικασία της καρκινογένεσης στα νεοπλάσματα εκ μεταβατικού επιθηλίου της ουροδόχου κύστης." Thesis, 2010. http://nemertes.lis.upatras.gr/jspui/handle/10889/4290.
Full textBladder cancer is the fourth and tenth most common malignancy in men and women, respectively, and its incidence is increasing annually in the developed countries. Current prognostic parameters cannot predict with certainty the long-term outcome of bladder cancer and as a result there is a need to identify markers that may predict tumor behavior. Furthermore, given the limitations of current therapeutic options (surgery, chemotherapy or immunotherapy and radiotherapy), novel treatment strategies are very much needed. One such strategy targets transcription factors such as nuclear receptors and their upstream activators. Disruption of these transcription factors is a key element in the initiation and maintenance of a malignant phenotype. The nuclear receptor PPARγ is involved in controlling metabolism, cell growth, angiogenesis, and immune and inflammatory responses. In addition, it has also been suggested that it regulates tumor suppression as well as tumor promotion. RXRα is another member of the nuclear receptor superfamily, that partners PPARγ to form the DNA-binding complex. RXR ligands are already being used as chemopreventive agents in various types of cancer. The transcription factor AP-1 is formed by dimerization of Jun and Fos proteins and its activity is often associated with tumor progression. On the other hand, there is also evidence that AP-1 may enhance apoptosis. CBP is one of the most important transcriptional integrators. The competition of PPARγ and AP-1 for CBP is one of the multiple mechanisms that explain the negative PPARγ/AP-1 cross-talk. In the present study, we assessed separate and concurrent expression of the five factors (PPARγ, RXRα, p-c-Jun, c-Fos, CBP) in normal urothelium, precancerous lesions and urothelial carcinomas (UC). Clinical samples were derived from 88 patients who had undergone diagnostic biopsy or therapeutic excision of the bladder, the kidney or the ureter. Parafin section immunohistochemistry was utilized and relative expression was estimated in intracellular compartments, intraepithelial layers and histologic categories of urothelium. All five factors had mainly nuclear pattern of expression. P-c-jun was downregulated in patients older than 70 years old compared to younger ones, whereas age did not affect the expression of the rest four factors. PPARγ, CBP, p-c-Jun and c-Fos were upregulated towards tumorigenesis. PPARγ and CBP showed an inverse relationship with carcinoma level of differentiation. Moreover, PPARγ expression downregulated significantly in invasive tumors compared to non-invasive ones. On the contrary, RXRα expression did not vary significantly along the carcinogenesis course. The following correlations were based on coexpression analysis to reveal molecular interactions between the five factors. The established protective effect of PPARγ on urothelium was accompanied by concomitant RXRα, p-c-Jun and c-Fos moderate or strong expression. In detail, p-c-Jun’s increasing expression strengthened the positive relation of PPARγ with better differentiated, less invasive tumors, whereas c-Fos seemed to mildly lessen PPARγ’s favourable effect in urothelium differentiation. Statistically significant PPARγ upregulation in malignant tissues compared to normal urothelium and in non-invasive tumors compared to invasive ones is suppressed and finally cancelled by CBP’s increasing expression. PPARγ and AP-1 seemed to influence the negative relation of CBP with loss of differentiation and increase of malignant potential in UC, an observation that denotes a cross-talk between these molecular factors. Interestingly, most of the aforementioned correlations were noticed in patients older than 70 years old, but not all of them were plausible in younger patients. The results from the present study could lead to conclusions possibly applicable in chemoprevention and therapy strategies for urothelial carcinomas.
Rito, Carlos Manuel dos Santos Gonçalves. "On surfaces of general type with pg = q = 1 having an involution." Doctoral thesis, 2007. http://hdl.handle.net/10348/62.
Full textO principal assunto desta tese é o estudo de superfícies S algébricas e projectivas de tipo geral com pg = q = 1 que têm uma involução i. Estuda-se também o caso pg = 1, q = 0 e S/i birracional a uma superfície K3. Involuções surgem em muitos contextos no estudo de superfícies algébricas. Por exemplo a não birracionalidade da aplicação bicanónica de uma superfície de tipo geral implica na maioria dos casos a existência de uma involução na superfície. A aplicação bicanónica Ø2 (definida pelo sistema linear |2KS|) de superfícies de tipo geral S tem sido objecto de estudo por vários autores. Se a superfície S tem uma fibração de género 2, então a aplicação bicanónica de S é necessariamente composta com uma involução. Este é o chamado caso standard de não birracionalidade da aplicação bicanónica. Pelos resultados de Bombieri, [Bo], refinados mais tarde por Reider, [Rd], se uma superfície minimal S com K²S> 9 tem aplicação bicanónica não birracional, então S tem uma fibração de género 2, ou seja apresenta o caso standard. O caso não-standard é considerado em [Du], [CaCM], [CFM], [CM1], [CM2], [Xi2] e [Br], mas o caso pg = q = 1 n˜ao est´a ainda completamente classificado. Mais geralmente, superfícies de tipo geral com pg = q = 1 não estão bem compreendidas, e poucos exemplos são conhecidos. Se a superfície minimal S satisfaz pg = q = 1, ent˜ao 2 _ K2S_ 9 e a aplicação de Albanese é uma fibração conexa sobre uma curva elíptica. Seja g o género de uma fibra genérica da fibração de Albanese de S. Superfícies de tipo geral minimais com pg = q = 1 e K² = 2, 3 são classificadas em [Ca1], [CC1] e [CC2]. Superfícies com K² = 8 que são uma fibração isotrivial standard são classificadas em [Po1] e [Po4]. Para outros valores de K² temos apenas os exemplos de Catanese ([Ca2]), com (K2, g) = (4, 2), (5, 2), o exemplo de Xiao ([Xi1]), com (K², g) = (4, 2), e o exemplo de Ishida ([Is]), com (K², g) = (4, 3). Como já foi dito, o principal assunto desta tese é o estudo de superfícies S algébricas e projectivas de tipo geral com pg = q = 1 que têm uma involução i. Todorov, [To2], foi o primeiro a dar exemplos de superfícies S de tipo geral com pg = 1, q = 0 e aplicação bicanónica composta com uma involução i de S tal que S/i é birracional a uma superfície K3, ás quais chamamos superfícies de Todorov. Morrison, [Mo], descreve o espaço de moduli das superfícies de Todorov. Para K² = 1, Todorov mostra, em [To1], que a resolução W de S/i é um plano duplo com um modelo plano ramificado sobre duas cúbicas. Na Secção 3.1 demonstra-se que isto é verdade também para K² > 1 e dá-se um exemplo diferente dos exemplos de Todorov. Existem dois métodos usuais de construção de superfícies: Campedelli—coberturas duplas ramificadas sobre curvas (possivelmente singulares) — e Godeaux — quocientes por acção de um grupo (cf. [Re1]). Nesta tese o primeiro método é utilizado na obtenção de exemplos novos. Muitas vezes as singularidades impõem condições a mais sobre os parâmetros do sistema linear de curvas, o que implica cálculos complicados. Estes cálculos são efectuados utilizando o Sistema Algébrico Computacional MAGMA (V2.11-14) (ver http://magma.maths.usyd.edu.au/magma para mais informação sobre o Magma). Neste trabalho são dadas várias construções de superfícies S de tipo geral, não singulares e minimais, com pg = q = 1. Em [Po4], Polizzi classifica superfícies de tipo geral com pg = q = 1, K² = 8 e aplicação bicanónica de grau 2. Dá exemplos usando quocientes por acção de um grupo e mostra que estas superfícies são planos duplos de Du Val, descrevendo a curva de ramificação de um modelo plano correspondente (ver Teorema 1.3.2). Nas Secções 4.2.1 e 4.2.4 mostra-se como obter equações para tais curvas de ramificação. Na Secção 6.12 descreve-se como obter uma equação de um plano duplo com K² = 8 cuja aplicação bicanónica não é composta com a involução associada.
The main subject of this thesis is the study of surfaces of general type S with pg = q = 1 having an involution i. For such surfaces one has 2 ≤ K²⁄S ≤ 9 and only few examples with K² = 2, . . . , 5 or 8 are known. The quotient surface S/i is a surface with pg ≤1 and q ≤ 1 and its Kodaira dimension, Kod(S/i), can be any. A list of possibilities for the case Kod(S/i) = —∞1 and bicanonical map ¢2 composed with i has been given by Xiao in [Xi2]. Here the computational algebra system Magma is used to compute equations of plane models of double planes with pg = q = 1 and K² = 2, . . . , 8. For Kod(S/i) ≤ 0 and ≤2 composed with i, we show that S/i is regular and either: a) the Albanese fibration of S is of genus 2 or b) S has no genus 2 fibration and S/i is birational to a K3 surface. For case a) a list of possibilities and examples are given. An example for case b) with K² = 6 is constructed. This last case was a possibility mistakenly excluded in [Xi2]. For the case ¢2 not composed with i, a list of possibilities is given and several new examples are obtained, mostly as bidouble covers of surfaces. In particular minimal surfaces of general type with pg = q = 1, K2 = 6, 7 and birational bicanonical map are constructed. The case pg = 1, q = 0 and S/i birational to a K3 surface is also considered. It is shown that the smooth minimal model W of S/i is a double plane, with a plane model ramified over two cubics.
De, Los Santos Zeus Allen O. "Design and Synthesis of Small-molecule Inhibitors of the Hypoxia Inducible Factor-1 as Anticancer Therapeutics." 2014. http://scholarworks.gsu.edu/chemistry_theses/62.
Full textKeightley, Keir. "Frank Sinatra, hi-fi, and formations of adult culture : gender, technology, and celebrity, 1948-62." Thesis, 1996. http://spectrum.library.concordia.ca/221/1/NQ25911.pdf.
Full textRusch, Thomas. "Recursive Partitioning of Models of a Generalized Linear Model Type." Thesis, 2012. http://epub.wu.ac.at/3530/1/trusch.pdf.
Full textГрищенко, С. М. "Геоінформаційні технології як засіб формування екологічної компетентності майбутніх інженерів гірничого профілю." Thesis, 2014. http://lib.iitta.gov.ua/704191/1/Vidguk_Sovgira.pdf.
Full textДиссертационная работа посвящена проблеме использования геоинформационных технологий для формирования экологической компетентности будущих инженеров горного профиля. Экологическая компетентность будущего инженера горного профиля – личностное образование, характеризующееся приобретенными в процессе профессиональной подготовки профессионально ориентированными экологическими знаниями (когнитивный критерий), усвоенными способами обеспечения экологически безопасных горных работ (праксеологический критерий) в интересах устойчивого развития (аксиологический критерий) и сформированными качествами социально ответственного экологического поведения (социально-поведенческий критерий) и состоящее из следующих компонентов: 1) понимание и восприятие этических норм поведения в отношении других людей и в отношении природы (принципы биоэтики); 2) экологическая грамотность; 3) владение базовыми сведениями по экологии, необходимыми для использования в профессиональной деятельности; 4) способность использовать научные законы и методы при оценке состояния окружающей среды, участвовать в экологических работах, осуществлять экологический анализ мероприятий в области деятельности, разрабатывать планы мероприятий по снижению техногенной нагрузки производства на окружающую среду; 5) способность к обеспечению экологически сбалансированной деятельности, владение методами рационального и комплексного освоения георесурсного потенциала недр. Формирование последних двух компонентов требует комплексного использования средств геоинформационных технологий для анализа, обработки и моделирования различных пространственно-временных характеристик воздействия горного производства на окружающую среду. В работе теоретически обоснована и разработана модель использования геоинформационных технологий как средства формирования экологической компетентности в обучении будущих инженеров горного профиля. Внешнюю составляющую модели образуют ведущие факторы модернизации профессиональной подготовки будущих инженеров горного профиля и базис подготовки экологически компетентного инженера горного профиля, внутреннюю – этапы формирования экологической компетентности: на I этапе происходит формирование базовых компонентов экологической и ИКТ компетентностей в курсах «Экология» и «Информатика», на II – развитие базовых и формирования профессиональных компонентов экологической компетентности в спецкурсе «Экологическая геоинформатика», на III этапе экологическая компетентность развивается в учебных исследованиях по дисциплинам цикла профессионально-практической подготовки. Цели обучения спецкурса определяются необходимостью формирования умений использования средств геоинформационных технологий для решения экологически ориентированных задач профессиональной деятельности инженера горного профиля. Содержание обучения определяется путем отбора содержания обучения геоинформатики на основе принципа профессиональной ориентации и прикладной направленности. Технология обучения включает в себя взаимосвязанные составляющие: формы организации, методы и средства обучения, ведущими из которых являются средства геоинформационных технологий. Опытно-экспериментальная работа по проверке эффективности реализации в практической деятельности вуза по подготовке будущих инженеров горного профиля методики использования геоинформационных технологий как средства формирования экологической компетентности проходила в три этапа: аналитико-констатирующий, проектно-поисковый и формирующий. Анализ результатов формирующего этапа педагогического эксперимента с использованием χ2-критерия Пирсона, λ-критерия Колмогорова-Смирнова и φ*-критерия Фишера показал, что распределение студентов в экспериментальных и контрольных группах по уровню сформированности экологической компетентности имеет статистически значимые различия, обусловленные применением разработанной методики.
The thesis is devoted to the problem of geoinformation technology usage in ecological competence formation of the Mining Engineers students. In this thesis the structure, content, levels, criteria and indicators of ecological competence formation of the future Mining Engineers are developed; the model of usage geoinformation technologies as a tool of the Mining Engineers students environmental competence formation was theoretically grounded and developed; the geoinformation technologies usage technique, which led to the ecological competence formation of the future Mining Engineers was developed; the effectiveness of the developed technique at teaching students of mining specialties was experimentally proved.
Кіяновська, Н. М. "Розвиток інформаційно-комунікаційних технологій навчання вищої математики студентів інженерних спеціальностей у Сполучених Штатах Америки." Thesis, 2014. http://lib.iitta.gov.ua/704186/1/dis_%D0%9Ai%D1%8F%D0%BD%D0%BE%D0%B2%D1%81%D1%8C%D0%BA%D0%B0.pdf.
Full textВ работе исследуется проблема развития информационно-коммуникационных технологий (ИКТ) обучения высшей математике студентов инженерных специальностей в США. В первом разделе охарактеризован понятийно-терминологический аппарат проблемы исследования и осуществлен историко-педагогический анализ развития ИКТ обучения высшей математике студентов инженерных специальностей США. Изучение историко-педагогических источников проблемы исследования позволило отразить эволюцию и выделить этапы развития теории и методики использования ИКТ в обучении высшей математике студентов инженерных специальностей в США: 1) 1965–1973 гг. – связан с появлением достаточного количества компьютерных средств различного уровня, оснащенные диалоговыми языками и спецификой аппаратного обеспечения ИКТ; 2) 1973–1981 гг. – связан с распространением в университетах США сетевой ОС UNIX, использованием мини- и микрокомпьютерных систем; 3) 1981–1989 гг. – связан с распространением персональных компьютеров; 4) 1989–1997 гг. – связан с созданием WWW и использованием технологий Web 1.0; 5) 1997–2003 гг. – связан с появлением и разработкой систем управления обучением; 6) с 2003 г. по настоящее время – связан с переносом в Web-среду средств поддержки математической деятельности и развитием облачных технологий обучения. На каждом этапе проанализированы ведущие средства ИКТ обучения высшей математике и определены основные особенности использования средств ИКТ в обучении высшей математике студентов инженерных специальностей. Проведенный анализ этапов развития и использования ИКТ и средств в процессе обучения высшей математике предоставил возможность сделать такой вывод: появление нового типа аппаратных или программных средств ИКТ влияет на процесс организации обучения высшей математике и на современном этапе создает условия для реализации облачно-ориентированного обучения высшей математике, становится ведущим направлением в США и в Украине. Во втором разделе описаны ведущие ИКТ обучения высшей математике студентов инженерных специальностей США на современном этапе, проанализирован Национальный план образовательных ИКТ, рассмотрены модели использования ИКТ в обучении высшей математике студентов инженерных специальностей США. Национальный план образовательных ИКТ, принятый Департаментом образования США в 2010 году, является моделью обучения, основанной на использовании ИКТ, включает в себя цели и рекомендации в пяти основных направлениях: обучение, оценивание, преподавательская деятельность, средства и производительность. Проведенный анализ научных источников дал возможность выделить модели использования ИКТ в процессе обучения высшей математике студентов инженерных специальностей США на разных этапах развития теории и методики использования ИКТ в обучении высшей математике студентов инженерных специальностей. В третьем разделе проведен анализ доступных ИКТ обучения высшей математике, разработчиками которых являются отечественные ученые, обоснованы возможности применения опыта США для усовершенствования процесса обучения высшей математике в технических вузах Украины; разработана структурно-функциональная схема и рекомендации по использованию ИКТ в обучении высшей математике студентов инженерных специальностей Украины, основываясь на положительном опыте США, определены информационно-коммуникационной компетентности преподавателя высшей математики, описано разработанный спецкурс, направленный на развитие информационно-коммуникационной компетентности преподавателей высшей математики.
The research deals with the problem of the development and maintaining of information and communication technology learning tools used in learning of mathematics of future engineers in the U.S. We characterize the nature of convergence trends information system of higher engineering education with its other U.S. trends; defined the main historical and pedagogical stages of development of the theory and methods of use of information and communication technology in teaching higher mathematics engineering students in the U.S.; the analysis of available information and communication technology learning tools of mathematics, developers who have our scientists; reasonable possibility of using U.S. experience to improve the learning process of higher mathematics in technical universities in Ukraine; developed scheme using information and communication technology in learning higher mathematics engineering students in Ukraine; offered a special course «Information and communication technology learning tools in learning mathematics engineering students» for the increasing qualifications of teachers mathematical disciplines technical universities and training of masters of mathematics.
Модло, Євгеній Олександрович. "Застосування мобільних Інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів." Thesis, 2019. http://lib.iitta.gov.ua/718830/1/dis_Modlo.pdf.
Full textДиссертация на соискание ученой степени кандидата педагогических наук по специальности 13.00.10 – информационно-коммуникационные технологии в образовании (01 – Образование/Педагогика). – Государственное учреждение „Луганский национальный университет имени Тараса Шевченко”. – Старобельск, 2019. Диссертационная работа посвящена проблеме разработки и внедрения методики использования мобильных интернет-устройств в обучении бакалавров электромеханики моделированию технических объектов. На основании анализа научной литературы теоретически обоснованы и разработаны содержание компетентности бакалавра электромеханики в моделировании технических объектов, критерии ее сформированности и модель использования мобильных интернет-устройств в обучении бакалавров электромеханики моделированию технических объектов. Разработана и экспериментально проверена методика использования мобильных интернет-устройств в обучении бакалавров электромеханики моделированию технических объектов; уточнено понятие мобильного интернет-устройства; усовершенствована система средств мобильных ИКТ обучения бакалавров электромеханики; получила дальнейшее развитие методика обучения бакалавров электромеханики компьютерному моделированию.
Дисертація на здобуття наукового ступеня кандидата педагогічних наук за спеціальністю 13.00.10 – інформаційно-комунікаційні технології в освіті (01 – Освіта/Педагогіка). – Державний заклад „Луганський національний університет імені Тараса Шевченка”. – Старобільськ, 2019. Дисертаційну роботу присвячено проблемі розробки та впровадження методики використання мобільних інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів. На підставі аналізу наукової літератури теоретично обґрунтовано та розроблено зміст компетентності бакалавра електромеханіки в моделюванні технічних об’єктів, критерії її сформованості та модель процесу використання мобільних інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів. Розроблено та експериментально перевірено методику використання мобільних інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів; уточнено поняття мобільного інтернет-пристрою; удосконалено систему засобів мобільних ІКТ навчання бакалаврів електромеханіки; дістала подальшого розвитку методика навчання бакалаврів електромеханіки комп’ютерного моделювання.
Модло, Євгеній Олександрович. "Застосування мобільних Інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів." Thesis, 2019. http://lib.iitta.gov.ua/718831/1/aref_Modlo_site.pdf.
Full textДиссертация на соискание ученой степени кандидата педагогических наук по специальности 13.00.10 – информационно-коммуникационные технологии в образовании (01 – Образование/Педагогика). – Государственное учреждение „Луганский национальный университет имени Тараса Шевченко”. – Старобельск, 2019. Диссертационная работа посвящена проблеме разработки и внедрения методики использования мобильных интернет-устройств в обучении бакалавров электромеханики моделированию технических объектов. На основании анализа научной литературы теоретически обоснованы и разработаны содержание компетентности бакалавра электромеханики в моделировании технических объектов, критерии ее сформированности и модель использования мобильных интернет-устройств в обучении бакалавров электромеханики моделированию технических объектов. Разработана и экспериментально проверена методика использования мобильных интернет-устройств в обучении бакалавров электромеханики моделированию технических объектов; уточнено понятие мобильного интернет-устройства; усовершенствована система средств мобильных ИКТ обучения бакалавров электромеханики; получила дальнейшее развитие методика обучения бакалавров электромеханики компьютерному моделированию.
Дисертація на здобуття наукового ступеня кандидата педагогічних наук за спеціальністю 13.00.10 – інформаційно-комунікаційні технології в освіті (01 – Освіта/Педагогіка). – Державний заклад „Луганський національний університет імені Тараса Шевченка”. – Старобільськ, 2019. Дисертаційну роботу присвячено проблемі розробки та впровадження методики використання мобільних інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів. На підставі аналізу наукової літератури теоретично обґрунтовано та розроблено зміст компетентності бакалавра електромеханіки в моделюванні технічних об’єктів, критерії її сформованості та модель процесу використання мобільних інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів. Розроблено та експериментально перевірено методику використання мобільних інтернет-пристроїв у навчанні бакалаврів електромеханіки моделювання технічних об’єктів; уточнено поняття мобільного інтернет-пристрою; удосконалено систему засобів мобільних ІКТ навчання бакалаврів електромеханіки; дістала подальшого розвитку методика навчання бакалаврів електромеханіки комп’ютерного моделювання.
Глущенко, Олена Вадимівна. "Формування енергоефективної компетентності майбутніх кваліфікованих робітників машинобудівного профілю." Thesis, 2017. http://lib.iitta.gov.ua/710094/1/%D0%A0%D0%9E%D0%91%D0%9E%D0%A2%D0%90%20%D0%93%D0%9B%D0%A3%D0%A9%D0%95%D0%9D%D0%9A%D0%9E.pdf.
Full textВ диссертации конкретизирована суть понятия «энергоэффективная компетентность будущих квалифицированных рабочих машиностроительного профиля». Теоретически обоснованы и экспериментально проверены педагогические условия, усовершенствован диагностический инструментарий исследования сформированности энергоэффективной компетентности. Спроектирована модель, разработаны и внедрены в учебно-воспитательный процесс подготовки будущих слесарей-электриков по ремонту электрооборудования в ПТУЗ методика формирования их энергоэффективной компетентности и учебно-методическое обеспечение названого процесса.
The essence of the concept «energy efficient competence of machine-building profile skilled workers» is specified in the thesis. It is a dynamic combination of knowledge, skills, practical skills, experience, professionally important qualities and personal values that determines its ability to implement complex professional tasks related to the rational use of energy resources and using energy efficient production technologies, environmentally friendly environment successfully to accomplish their professional tasks. The structure of energy efficient competence of machine-building profile skilled workers covers the interrelated components: value-motivational – awareness of own benefits from economic, social, environmental benefits of energy-efficient professional activities, innovation-cognitive – having the ways of rational use of energy resources in professional activities and their constant improvement according to new energy-efficient technologies, professional-activity – the ability to use energy-efficient technologies in professional activities, reflexively-judgmental – critical re-evaluation of the results of professional activity.