To see the other types of publications on this topic, follow the link: 3dsi.
Dissertations / Theses on the topic '3dsi'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic '3dsi.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Mota, Frutuoso Tadeu. "Caractérisation des mosfets en silicium à budget thermique réduit pour applications numériques et haute fréquence sur des systèmes d'intégration séquentielle 3D." Electronic Thesis or Diss., Université Grenoble Alpes, 2023. http://www.theses.fr/2023GRALT054.
Full textAbstract:
L'intégration séquentielle en 3D (3DSI) consiste à empiler de manière séquentielle des couches de dispositifs actifs à l'aide de connexions verticales ayant des dimensions similaires à celles des contacts standard Back-End-Of-Line (<100 nm). Cela permet la co-intégration de différents systèmes sur des couches séparées avec une densité d'interconnexion élevée et élimine les compromis coûteux liés à l'optimisation de différents dispositifs sur le même substrat. De même, la réduction des parasites d'interconnexion et l'intégration hétérogène offrent un grand potentiel pour les applications 5G à ondes millimétriques (mmW).Cependant, les dispositifs empilés en 3D présentent de nouveaux défis de processus. Les transistors de haut niveau doivent être traités à basse température (≤ 500 °C) pour préserver l'intégrité des dispositifs sur les niveaux inférieurs. L'intégration CMOS standard avec un faible budget thermique (LTB) entraîne une dégradation importante des performances. Néanmoins, de nouvelles avancées dans le processus d'intégration LTB du silicium ouvrent la voie au développement de dispositifs atteignant les mêmes performances que leurs homologues à haute température. Par conséquent, l'objectif de ce travail de doctorat est d'analyser les effets de ces nouveaux processus sur les caractéristiques électriques des dispositifs MOSFET LTB et d'établir des lignes directrices pour une optimisation ultérieure.Le manuscrit de cette thèse présente les principaux résultats obtenus grâce au récent développement de cette technologie et est présenté en trois parties :Activation des dopants de la source et du drain près de la jonction à l'aide d'un recuit d'épitaxie à l'état solide à basse température (SPER). L'étude est réalisée en estimant le profil de la jonction à l'aide d'une nouvelle technique de CV non destructive couplée à un modèle amélioré de cartographie conforme des capacités marginales des transistors. Les résultats sont utilisés pour comprendre le comportement électrique et les mécanismes de dégradation des dispositifs en fonction de la position de chevauchement.Propriétés de piégeage du matériau de permittivité faible (SiCO) utilisé pour l'oxyde d'espacement de grille à basse température et ses effets sur les performances du transistor. Deux mécanismes de piégeage sont identifiés sur ce matériau : les pièges d'interface en silicium rapides, liés à la qualité de l'oxyde natif, et les défauts profonds lents répartis dans le volume de l'oxyde SiCO. L'effet de ces pièges près de la région d'accès des performances électriques du transistor est étudié.Effet des principales étapes de processus à basse température sur les figures de mérite RF des dispositifs. L'objectif est d'évaluer les performances des dispositifs à des fréquences élevées. Les capacités parasites plus faibles des espacesurs SiCO, la résistance de grille réduite grâce au recuit laser aux nanosecondes UV et la mobilité élevée grâce à la contrainte de tension CESL sont des étapes clés à faible budget thermique contribuant à des transistors RF haute performance avec des figures de mérite similaires à celles des homologues à budget thermique élevé (HTB)3D sequential integration (3DSI) consists of sequentially stacking active device layers using vertical interconnections with similar dimensions as standard Back-End-Of-Line contacts (<100nm). It allows the co-integration of different systems on separated layers with a high interconnection density and it eliminates costly trade-offs coming from the optimization of different devices on the same substrate. Likewise, the reduced interconnection parasitic and heterogeneous integration offer great potential for 5G millimeter-wave (mmW) applications.However, 3D stacked devices come along with new process challenges. Top-tier transistors need to be processed at low temperatures (≤ 500°C) to preserve the integrity of devices on lower tiers. Standard CMOS integration with low thermal budget (LTB) leads to substantial performance degradation. Nevertheless, new breakthroughs in the silicon LTB integration process open the path to the development of devices that reach the same performance of their high temperature counterparts. Therefore, the objective of this Ph.D. work is to analyze the effects of those new processes on the electrical characteristics of LTB MOSFET devices and draw guidelines for further optimization.The manuscript for this Ph.D. introduces the main results obtained from the recent development of this technology and it is presented on three parts:Activation of source and drain dopants near the junction using a low temperature Solid State Epitaxy Recrystallization (SPER) anneal. The study is performed with an estimation of the junction profile using a novel nondestructive CV technique coupled to as improved conformal mapping model of the transistors fringe capacitances. The results are used to understand the electrical behavior and degradation mechanisms of the devices as function of the overlap position.Trapping properties of the low permittivity material (SiCO) used for the low temperature gate spacer oxide and its effects on the transistor performance. Two trapping mechanisms are identified on this material: Fast Silicon interface traps, related to the quality of the native oxide, and slow deep defects distributed in the bulk of the SiCO oxide. The effect of those traps near the access region of the electrical performance transistor are studied.Effect of key low temperature process steps of the devices RF FoMs. The objective is to evaluate the performance of the devices at high frequencies. The lower parasitic capacitances from SiCO spacers, low gate resistance from the UV nanoseconds laser anneal and high mobility from the CESL tensile stain are key low thermal budget steps contributing to high-performance RF transistors with similar FoMs to HTB counterparts
2
Бурячек, Т. О., and О. В. Вишневська. "Методи оптимізації моделей 3ds Max." Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/4342.
Full text
3
Chester, Ivan Robert. "Delineating and Developing Expertise in Three-Dimensional Computer Aided Design." Thesis, Griffith University, 2006. http://hdl.handle.net/10072/366351.
Full textAbstract:
The problem addressed in this thesis is the development of strategic knowledge through the teaching and learning process. Specifically, it addresses strategic knowledge in three-dimensional solid modelling computer aided design (3DSM-CAD). The problem is addressed through two separate studies. In Study 1 the research question, What constitutes strategic 3DSM-CAD knowledge? is addressed. The outcomes of the first study are then used to inform the second study which addresses the research question: What instructional strategies will improve the use of strategic 3DSM-CAD knowledge? It is argued that CAD knowledge is inadequately theorised and a reconceptualisation of 3DSM-CAD knowledge is proposed. This proposed reconceptualisation is tested in Study 1 using a sample of 3DSM-CAD experts. The findings of this study are interpreted as supporting the theorised reconceptualisation of 3DSM-CAD knowledge. Study 2 investigates whether the use of expert strategies by novice 3DSM-CAD learners can be improved though the teaching and learning process. An instructional intervention is devised and empirically tested. The findings of this study provide support for the design of the intervention.
It is argued in this thesis that the existing conceptualisation of CAD (computer aided design) knowledge is too narrow and is inadequately theorised, particularly the current interpretation of strategic knowledge. Presently strategic CAD knowledge is narrowly defined in terms of making choices between methods of model production. This thesis draws on existing research on expertise and in cognitive science to interpret strategic knowledge in terms of the metacognitive processes undertaken by experts when they engage in 3DSM-CAD processes. Strategic 3DSM-CAD knowledge is thus more broadly interpreted to include the metacognitive processes of planning, predicting, process selection, monitoring and evaluating. It is argued that this reconceptualisation is needed, as much of the existing research in CAD expertise is based on two-dimensional and three-dimensional CAD and not the parametric three-dimensional CAD currently used in industry and in education. The parametric nature of current 3DSM-CAD software provides a situation whereby decisions made at an early stage in the modelling process may later lead to model failure. The development of the use of expert 3DSM-CAD strategies is therefore considered important not only in order to improve the efficiency of the modelling process but also in ensuring the integrity of the model during subsequent design modification. Study 1 of the thesis addresses the delineation of 3DSM-CAD expertise. It uses existing research in expertise, the identification of experts and in knowledge elicitation as a basis for the study. In addition, a theoretical examination of the literature in cognition and mental imagery is used to conceptualise the 3DSM-CAD process. 3DSM-CAD experts are identified for case studies that investigate the cognitive processes undertaken by 3DSM experts as they engage in 3DSM-CAD processes. The selection of experts is undertaken using criteria identified in existing research in expertise: they have a number of years experience in the domain, they currently use 3DSM-CAD on a regular basis, others regard them as possessing domain expertise and, they have experience in teaching/training others. The findings of this study suggest that, while these existing criteria are useful when identifying experts in the use of complex computer applications, there is the possibility that these activities may be specific to the domain in which the software is used. For example, 3DSM-CAD capabilities may be specific in engineering or architecture but not to 3DSM-CAD in general. It is therefore argued that higher level experts may be identified by the additional criteria of their engagement in a range of problem solving activities across a range of contexts such as is found in 'Help Desk' personnel. Study 1 also builds on existing knowledge elicitation research through the development and testing of a knowledge elicitation technique, video-capture with think-aloud protocols, which enables the capture of very detailed data regarding the cognitive processes employed by individuals as they interact with complex computer applications. The findings of Study 1 support the proposed reconceptualisation of 3DSM-CAD knowledge and, in particular, the metacognitive nature of the strategic knowledge employed by 3DSM-CAD experts. Study 1 also found that 3DSM-CAD experts employ a range of mental imagery techniques, including those identified in this thesis as unique to 3DSM-CAD, in the process of solving 3DSM-CAD problems. Further, the findings establish that 3DSM-CAD experts engage in 'expert parsing' when dividing an object into parts prior to undertaking the modelling process. 'Expert parsing' is similar to the characteristic of experts in other fields who employ a deeper and more structured problem solving approach, looking beyond the surface features of an object. 3DSM-CAD experts identify deeper features and alternative algorithmic saliencies so that the choices of processes that allow both efficient object modelling and the possibility of making future changes may be made. 3DSM-CAD experts are found to bring a different approach to the 3DSM-CAD process based upon the 'encapsulation' (Boshuizen, Schmidt, Custers, & Van de Weil, 1995) of knowledge into an 'easy to change' script. Study 2 addresses the research question: What instructional strategies will improve the use of strategic 3DSM-CAD knowledge? Study 2 builds on the findings of Study 1 proposing that expertise in 3DSM-CAD involves both the development of metacognitive processes and 'expert parsing'. It is argued that, due to the perceptual nature of the processes involved in 3DSM-CAD, the metacognitive processes involved in expert 3DSM-CAD performance are facilitated by mental imagery. The development of the intervention employed in Study 2 is derived from the current research in metacognition, mental imagery and the design of learning strategies. A multi-treatment intervention is designed and tested empirically. This treatment is found to be effective in improving the use of expert 3DSM-CAD strategies. From these two studies it is concluded that the proposed reconceptualisation of 3DSM-CAD knowledge into three levels; declarative command knowledge, specific procedural command knowledge and strategic knowledge is appropriate. Further, the research supports the metacognitive nature of strategic knowledge and thus the need to address the development of expertise in 3DSM-CAD through a cognitive approach to instruction.Thesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Vocational, Technology and Arts Education
Full Text
4
Fischer, Leonardo Garcia. "3DS-BVP : a path planner for arbitrary surfaces." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2011. http://hdl.handle.net/10183/49751.
Full textAbstract:
Métodos eficientes para planejamento de caminhos têm sido explorados ao longo dos anos para permitir movimento de robôs autônomos ou agentes virtuais. Basicamente, estes algoritmos buscam pelo ambiente por um caminho com pouca probabilidade de colisão com obstáculos, e que conduza o agente de uma posição inicial para uma posição objetivo. Apesar de os primeiros algoritmos para planejamento de caminhos para calcular rotas em grafos foram apresentados a mais de 50 anos atrás, ainda existe muito trabalho sendo realizado para melhorar as técnicas existentes hoje em dia. Os algoritmos de planejamento de caminhos atuais normalmente assumem que o ambiente pode ser facilmente projetado em um plano. Também existem diversos algoritmos que podem trabalhar facilmente com mais dimensões. Porém, uma classe de ambientes que não podem ser facilmente tratadas pelos algoritmos atuais é composta por superfícies arbitrárias. Estas superfícies, com buracos e torções, por exemplo, não podem ser facilmente projetadas em um plano. O fato de o caminho ser restrito à superfície faz com que, em um dado ponto o algoritmo precise calcular um caminho 2D em uma superfície 3D, o que não é trivial de mapear em um algoritmo de planejamento de caminhos para várias dimensões. Este trabalho apresenta uma nova técnica de planejamento de caminhos em superfícies 3D, chamada 3DS-BVP. Este novo planejador de caminhos é baseado em um algoritmo de planejamento de caminhos para ambientes 2D. O algoritmo anterior, chamado BVPPath- Planner, utiliza problemas de valor de contorno (Boundary Value Problems, BVP) e funções harmônicas para gerar campos potenciais. Ao seguir o gradiente descente destes campos potenciais, é possível produzir caminhos suaves livres de mínimos locais, partindo de qualquer posição do ambiente para um dado objetivo. Nosso algoritmo gera um campo potencial diretamente na superfície 3D utilizando um método numérico que foi inspirado por aquele utilizado no BVP-Path-Planner. O 3DS-BVP trabalha sobre superfícies complexas com buracos ou curvaturas, representadas por malhas de triângulos, sem a necessidade de parametrizar a superfície em uma representação 2D. Nossos resultados demonstram que a técnica pode gerar caminhos com qualidade similar àqueles gerados pelo BVP-Path-Planner em ambientes planos. O mesmo algoritmo é capaz de gerar caminhos em superfícies arbitrárias a taxas de atualização interativas.Efficient path planning methods are being explored along the years to allow the movement of autonomous robots or virtual agents. Basically these algorithms search the environment for a path with low probability of collision with obstacles that conduces the agent from an initial to a goal position. Although the first path planning algorithms to compute routes in graphs were presented more than 50 years ago, there is still a lot of effort into improving the current approaches. The current path planning algorithms usually assume that the environment can be easily projected on a plane. There are also other algorithms that can easily deal with higher dimensional spaces. But a class of environments that cannot be easily treated by current algorithms is the one composed by arbitrary surfaces. These surfaces, with holes and bends for instance, cannot be directly projected on a plane. Because the path must be on the surface, it has only 2 degrees of freedom in any point of the surface, which is not trivial to map for a higher dimensional path planning algorithm. This work presents a new technique for path planning on 3D surfaces called 3DS-BVP. This new path planner is based on a previous path planning algorithm for 2D environments. The former algorithm, called BVP-Path-Planner, uses Boundary Value Problems (BVP) and harmonic functions to generate potential fields. By following the gradient descent of these potential fields, it is possible to produce smooth paths free from local minima from any point of the environment to a given goal position. Our algorithm generates a potential field directly on the 3D surface using a numerical method inspired on the one used by the BVP-Path-Planner. The 3DS-BVP works over complex surfaces of arbitrary genus or curvature, represented by a triangle mesh, without the need of 2D parametrizations. Our results demonstrate that our technique can generate paths with similar quality as those generated by the BVP-Path-Planner in planar environments. The same algorithm is also able to generate paths in arbitrary surfaces at interactive frame rates.
5
Nilsson, Linus. "Plug-in for stereoscopic studio production using 3Ds Max." Thesis, University of Gävle, Department of Industrial Development, IT and Land Management, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-7357.
Full textAbstract:
In this day and age when 3D cinema is ever increasing in popularity and 3D television sets on the verge of becoming a reality in our homes, the media production companies are interested in looking at how they can start producing stereoscopic format media for this exciting medium. This thesis proposes a solution to parts of the stereoscopic production pipeline by examining and proposing the extent of the requirements of a plug-in to aid in the setting up and rendering of stereo pairs and ultimately proposing such a plug-in and modifying it to suit the proposed requirements. With a high emphasis on ensuring that the plug-in is capable of producing enjoyable stereoscopic content, the plug-in is tested by rendering a demanding scene previously used in factual production work. The findings of these tests ultimately lead to the evaluation of the plug-ins usefulness as a tool for not only the production studio involved but for anyone interested in generating material for this exciting medium.
6
Ekman, Viktor, and Jesper Moen. "Exteriör och interiör visualisering av ett bostadshus i 3ds max." Thesis, Linköpings universitet, Medie- och Informationsteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-108867.
Full textAbstract:
Denna rapport beskriver och drar jämförelser mellan olika visualiseringstekniker i 3D Studio Max och Adobe Photoshop CS3. Syftet med studien är att undersöka olika visualiserings- och renderingstekniker för att se vilka tekniker som ger ett smidigast och mest verklighetstroget resultat utifrån olika förutsättningar. Studien grundar sig på en huvudfråga och två stycken underfrågor. Hur skapar man ett effektivt och verklighetstroget visualiseringsresultat av ett bostadskvarter för intressenter? • Vilka fördelar och nackdelar finns det med olika visualiseringstekniker? • Vilka metoder ger ett verklighetstroget visualiseringsresultat vid interiör respektive exteriör visualisering? Slutsatsen med studien är att varje situation är unik och att det finns fördelar och nackdelar med varje teknik och metod i de olika programmen. För att nå ett önskat slutresultat så gäller det att lära sig hur varje metod fungerar och sedan anpassa den utifrån varje enskild situation.
7
Вишневська, О. В. "Особливості створення реалістичних візуалізацій тривимірних сцен у програмі 3ds MAX." Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/10762.
Full textAbstract:
Наведено результати досліджень щодо візуалізації тривимірних сцен, створених програмою 3ds Max. Окреслено складові елементи процесу рендеру візуалізатора VRay. Розроблено оптимальну послідовність налаштувань параметрів візуалізатора та оптимізацію процесу рендеру.The results of three-dimensional scenes visualization created by the 3ds Max program are presented. The components of VRay render in renderering are shawn. The optimal sequence of settings for parameters of the visualizer and optimization of rendering are developed.
8
Дуванов, С. С. "Комплекс інтерактивних тренажерів для вивчення технологій анімації в 3ds Max." Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86877.
Full textAbstract:
Дипломний проєкт присвячено розробці серії інтерактивних веб-тренажерів для вивчення основ створення анімації в програмі 3Ds Max. В роботі проведено аналіз предметної області та існуючих аналогів, розглянуто їх недоліки та переваги. Обрано засоби та технології реалізації проєкту. Виконано моделювання роботи серії веб-тренажерів з використанням методологій IDEF0 та UML, проведено планування робіт. Розроблено дизайн інтерфейсів, створено теоретичні блоки та блоки із завданнями для кожного веб-тренажера із серії. Результатом виконання проєкту є розроблена серія веб-тренажерів для вивчення основ створення тривимірної анімації в програмі 3ds Max для дистанційного курсу дисципліни "Технології анімації та візуалізації" університету СумДУ за темами: "Кінематика пов'язаних об'єктів", "Анімація об'єктів Bones", "Анімація за ключовими кадрами".
9
Itoh, Daiki. "Force Haptic Interaction for Room-Scale 3D Painting." Research Showcase @ CMU, 2018. http://repository.cmu.edu/theses/134.
Full textAbstract:
Artistic painting involves mastery of haptic interaction with tools. Each tool brings unique physical affordances which determines an aesthetic expression of the finished work. For instance, a pen offers an ability to make a precise stroke in a realism painting, whereas a thick brush or a sponge works perfectly with dynamic arm movement in the abstract art such as action painting. Yet the selection of a tool is just a beginning. It requires repetitive training to understand the full capability of the tool affordance and to master the painting of preferred aesthetic strokes. Such physical act of an artistic expression cannot be captured by the computational tools today. Due to the increasing market adoption of augmented reality and virtual reality, and the decades of studies in haptics, we see an opportunity for advancing 3D painting experiences in non-conventional approach. In this research, we focus on force haptic interaction for 3D painting art in a room-scale virtual reality. We explore virtual tangibility and tool affordance of its own medium. In addition to investigating the fidelity of a physical interactivity, we seek ways to extend the painting capabilities by computationally customized force feedback and metaphor design. This system consists of a wearable force feedback device that sits on user’s hand, a software for motor control and real-time 3D stroke generation, and their integration to VR platform. We work closely with an artist to refine the 3D painting application and to evaluate the system’s usability.
10
Борщова, С. П., and К. В. Донець. "Можливості застосування плагіну Populate: Terrain для моделювання ландшафтних сцен в 3DS Max." Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/4351.
Full text
11
Jego, Jean-François. "Interaction basée sur des gestes définis par l’utilisateur : Application à la réalité virtuelle." Thesis, Paris, ENMP, 2013. http://www.theses.fr/2013ENMP0033/document.
Full textAbstract:
Ces travaux de recherche proposent une nouvelle méthode d'interaction gestuelle. Nous nous intéressons en particulier à deux domaines d'application : la thérapie à domicile par la réalité virtuelle et les arts scéniques numériques. Nous partons du constat que les interfaces standardisées ne sont pas adaptées à ces cas d'usage, car elles font appel à des gestes prédéfinis et imposés. Notre approche consiste à laisser la possibilité à l'utilisateur de faire apprendre ses gestes d'interaction par le système. Cela permet de prendre en compte ses besoins et aptitudes sensorimotrices. L'utilisateur réutilise ensuite son langage gestuel appris par le système pour interagir dans l'environnement virtuel. Cette approche pose des questions de recherche centrées sur la mémorisation, la rétroaction visuelle et la fatigue. Pour aborder ces trois aspects, nous étudions d'abord le rôle de l'affordance visuelle des objets et celui de la colocalisation dans la remémoration d'un corpus de gestes. Ensuite, nous évaluons l'influence de différents types de rétroactions visuelles sur l'évolution des gestes répétés par l'utilisateur dans une série de tâches de manipulation. Nous comparons également les performances entre des gestes d'amplitude réaliste et des gestes d'amplitude faible pour effectuer la même action. Aussi, nous attachons une importance à rendre l'interface accessible en utilisant des dispositifs bas coûts et peu intrusifs. Nous explorons les moyens de pallier les contraintes techniques liées aux systèmes peu performants. Pour cela, nous avons conduit des expériences où plus de six mille gestes proposés par une quarantaine d'utilisateurs ont été étudiésIn this thesis, we propose and evaluate new gestural interfaces for 3DUI. This work is motivated by two application cases: the first one is dedicated to people with limited sensory-motor abilities for whom generic interaction methods may not be adapted. The second one is artistic digital performances, for which gesture freedom is part of the creative process. For those cases, a standardized approach is not possible and thus user-specific or dedicated interfaces are needed. We propose a user-defined gestural interaction that allows the user to make the system learn the gestures that he has created, in a specific phase, prior to using the system. Then, the user reuses his created gestures to interact in the virtual environment. This approach raises research questions about memorization of gestures, effects of fatigue and effects of visual feedbacks. To answer those questions, we study the memorization of user created gestures regarding the role of affordances and colocalization on gesture recall. Then, we study the role of different visual feedbacks on gesture repetitions for a set of manipulation tasks. We also compare full-collocated gestures to loose gestures with lower amplitude. Also, the approach has been designed to be affordable using low-cost devices. We explore solutions to deal with the lower data quality of such devices. The results of the user-studies are based on the analysis of six thousand gestures performed by forty subjects
12
Є, Рижавський К., and Євген Володимирович Мартин. "Дослідження режиму полігонального моделювання Еditable poly у 3ds max для формування 3d-моделей." Thesis, Проблеми та перспективи розвитку системи безпеки життєдіяльності: Зб. наук. праць ХVІ Міжнар. наук.-практ. конф. молодих вчених, курсантів та студентів. – Львів: ЛДУ БЖД, 2021, 2021. http://sci.ldubgd.edu.ua:8080/jspui/handle/123456789/8324.
Full text
13
Edström, Sofie. "Interior visualization of an office in Braxen 3." Thesis, Linköpings universitet, Medie- och Informationsteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-94545.
Full textAbstract:
Den här rapporten beskriver ett antal olika visualiseringstekniker som testats med hjälp av 3ds Max Design 2012, Revit Architecture 2012 samt Photoshop CS5. Syftet var att ta reda på om de kunde användas vid interiör visualisering och hur de används. Projektet grundar sig i att White Arkitekter AB arbetar med utvecklingen av sitt blivande kontor i Braxen 3 och de ville testa de olika teknikerna i utvecklingssyfte i samband med designutveckling av kontoret. Visualiseringsteknikerna beskrivs utifrån vad de kan användas till och vad de har används till i de tre olika scener som byggts upp med hjälp av programmen, men även hur arbetsgången fungerade. Viss jämförelse mellan olika tekniker och olika sätt att utföra samma tekniker har gjorts. Till en början beskrivs hur modelleringen av scenerna har gått till. Efter det beskrivs de tekniker som används för att utveckla de tre olika scenerna och för att nå ett resultat i form av ett antal slutrenderingar som sedan redovisas i resultatdelen. Slutsatsen som drogs var att alla de tekniker som beskrivits är tillämpbara för interiör visualisering rent praktiskt, men de kanske inte är tillämpbara av tids- och kostnadsaspekter. Sedan diskuterar författaren kring teknikernas användbarhet och åsikter som utvecklats kring teknikerna och arbetsgången under arbetets genomförande.
14
Wingrave, Chadwick A. "Concept-Oriented Design in Chasm: Conversational Domain Language Inspired 3D User Interface Design and Development." Diss., Virginia Tech, 2008. http://hdl.handle.net/10919/28571.
Full textAbstract:
In my experience, novel ideas for 3D interaction techniques greatly outpace developers' ability to implement them, despite the potential benefit of these ideas. I believe this is due to the inherent implementation complexity of 3D interfaces, without sufficient support from methods and tools. Believing a developer-centric representation could overcome this problem, I investigated developer practices, artifacts and language. This resulted in the theory of Concept-Oriented Design and Chasm, a prototype realization of the theory. The key feature of Concept-Oriented Design is its use of developer-centric representations to create a multi-tiered implementation, ranging from an envisioned behavior expressed in conversational language to low-level code. Evaluation of Chasm by domain experts and its use in multiple case studies by volunteer developers has demonstrated that Concept-Oriented Design in Chasm addresses many of the problems of 3D design and development.Ph. D.
15
Ясменко, В. Р., and К. В. Донець. "Аналіз можливостей візуалізатора NVIDIA Iray у порівнянні з візуалізатором V-Ray програми 3DS Max." Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/4360.
Full text
16
Erlandsson, Hampus. "Decision support for new travel center in Norrköping." Thesis, Linköpings universitet, Kommunikations- och transportsystem, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-134386.
Full textAbstract:
Beslutsunderlag för nya resecentrum Norrköping i samband med den nya järnvägen Ostlänken. Detta arbete utgör en del av det beslutsunderlag som Norrköpings kommun tagit fram i samband med det nya resecentrumet. Rapporten avhandlar uppbyggandet av en 3d-modell av resecentrumet i 3ds-max samt enkel visualisering i Lumion 3D. Arbetet avhandlar också användandet av interaktiv visualisering som en del av tidig planeringsprocess. Interaktiv visualisering innebär att modeller byggs upp på plats istället för att bollas mellan parter Användandet av interaktiv visualisering har positiva effekter på bland annat samarbete, interaktion mellan beställare och konsulter samt för inlevelsen i hur olika designer påverkar rummet. Det sparar även tid genom att beslut om ett förslag kan tas snabbare än om man skulle bolla förslag mellan parter. Den lindrar också inlåsningseffekter, att man fastnar i en design. Tidiga modeller gör det också lättare för konsulter att tolka olika förslag och som ett komplement till traditionella 2d-ritningar.
17
Syversen, Eva. "Wayshowing i Visualiceringscenter C : Jämförelse av observationer under skyltskapande i virtuell miljo." Thesis, Linköpings universitet, Medie- och Informationsteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-80934.
Full textAbstract:
Denna kandidatuppsats behandlar wayshowing i en 3D-modell av Visualiseringscenter C, Norrköping. Syftet är att undersöka olika sätt att göra skyltar i virtuell miljö och vilket sätt som är mest lättarbetat för användaren som ska skapa dessa skyltar. Uppsatsen utgår från teori om wayshowing och om hur en bra skylt ska se ut för att uppfylla sitt syfte. Med hjälp av denna teori har skyltar skapats i en 3D-miljö. Det insamlade materialet som resultaten är baserade på kommer från två strukturerade observationer och en intervju. Deltagaren och observatören i observationerna var författaren själv och under intervjun hördes en student med liknande erfarenheter kring grafisk design och 3D som författaren. I observationerna testades två sätt att skapa skyltar; ett sätt där texturen gjordes innan skyltarna tillverkades i 3D-miljön och ett sätt där texturen gjordes efter det att skyltarna hade tillverkats i 3D- miljön. Resultaten från observationerna visar att det senare sättet är smidigast att använda eftersom det är lättare att anpassa texturen till skylten efter det att skylten har blivit modellerad i 3D. Observationerna undersökte även vilka digitala processer som användes och vilken tid de processerna tog. Under observationerna framkom att rendering var den digitala process om användes flest gånger. Den process som ansågs ta mest tid var så kallade tutorials, att ta reda på och införskaffa kunskap om hur ett moment kan utföras. Observationerna visade även att det är tidssparande att återanvända kameror, material och 3D-modeller.This bachelor thesis is about wayshowing in a 3D model of Visualiseringscenter C, Norrköping. The aim is to examine different ways to make signs in a virtual environment and which of these ways is the easiest to apply for the user. The essay is based on theory regarding wayshowing and how a good sign should look in order to fulfill its purpose. With the use of this theory, signs have been created in a 3D environment. The collected data which the results are based on comes from two structured observations and one interview. The participant and the observer of the observations was the author herself and the interview was done with a student who has similar experiences in graphic design and 3D as the author. The observations evaluated two different ways to create signs. One way in which the texture was made before the signs were made in the 3D environment and one way in which the texture was made after the signs had been manufactured in the 3D environment. The results of the observations show that the latter approach is more convenient to use because it is easier to adjust the texture after the sign has been created. The observations also considered the digital processes used and the time spent on these processes. The observations revealed that rendering was the most used digital process. The digital process which was most time consuming was the use of tutorials, i.e. to acquire knowledge of how an previously unknown digital process could be performed. The observations also revealed that re-use of cameras, materials, and 3D models was time saving.
18
Анісімов, Костянтин Віталійович, Д. В. Горбатенко, and А. В. Ліповська. "Моделювання віртуального 3D-макету Національного технічного університету "Харківський політехнічний інститут" в програмній системі Autodesk 3ds Max." Thesis, НТУ "ХПІ", 2013. http://repository.kpi.kharkov.ua/handle/KhPI-Press/3192.
Full text
19
Войцеховський, Я. С., and В. С. Зубко. "Візуалізація високополігональних моделей в 3D MAX." Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38748.
Full textAbstract:
Проведення профорієнтаційної роботи на факультеті ЕлІТ з метою збільшення контингенту студентів наразі є важливою та актуальною задачею. Щоб привернути увагу майбутніх абітурієнтів до спеціальностей факультету використовуються в тому числі і рекламні відеоролики.
20
Jennergren, Johan. "Storängen Söderköping- en visualisering av blivande ägarlägenheter på Storängen i Söderköping." Thesis, Linköpings universitet, Institutionen för teknik och naturvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-74332.
Full textAbstract:
På Storängen i Söderköping bygger Bygg GG i Norrköping i samarbete med G Gunnarsons Fastighets AB ett hus innehållande 14 ägarlägenheter. Då försäljningen av lägenheterna startade innan huset var färdigt bestod den största delen av säljunderlaget av ritningar och skisser. Syftet med examensarbetet var att utföra en visualisering av det blivande husets yttre i form av en digital 3d-modell samt att visa hur några av de blivande lägenheterna skulle komma att se ut. Då många av lägenheterna i huset liknar varandra togs beslutet att visualisera tre av husets lägenheter. Rapporten beskriver hur arbetet med att ta fram visualiseringen genomförts. Den ger även en inblick i visualiseringsprocessen samt de programvaror som använts för projektet. Projektet kan delas in i två delar. En exteriör del och en interiör del. I den exteriöra delen byggdes en 3d-modell av huset i 3d-programmet Google SketchUp som är ett lättanvänt program för att skapa digitala skisser och 3d-modeller. Modellen som kopplades samman med programmet Google Earth som är en ”digital jordglob” visar hur husets yttre skulle komma att se ut. Till den interiöra delen, som var projektets huvuddel byggdes en ny modell i samma program som den tidigare modellen. Modellen exporterades till 3d-programmet Autodesk 3ds Max där texturering, ljussättning och rendering för tre av de fjorton lägenheterna i huset genomfördes. 3ds Max som är ett mer avancerat program än SketchUp, ger användaren möjligheten att göra verklighetstrogna visualiseringar. Från 3ds Max renderades totalt 36 olika bilder fram från de tre lägenheterna. Ett urval av bilderna användes senare som säljunderlag för lägenheterna.
21
Benediktsdottir, Ásdis. "Analysing a Harvest Moon : On the translation of role language in Bokujō Monogatari: Hajimari no Daichi for the Nintendo 3DS." Thesis, Stockholms universitet, Tolk- och översättarinstitutet, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-118401.
Full textAbstract:
This thesis seeks to introduce the concept of role language in translation in the context of video game localisation. There is very little written on the subject of role language in translation from Japanese to English, and none which pertains to role language in video games. There is also a seeming deficiency of reliable literature regarding the product of translation in video game localisation, analysing what was done and what effects it may have had on the finished product. By analysing the particular role language profiles of selected characters from Bokujō Monogatari: Hajimari no Daichi for the Nintendo 3DS, this thesis hopes to serve as a stepping stone towards a new area of video game localisation. Eight non-playable characters, four male and four female, were analysed to create their respective role language profiles. Four scenarios were chosen for each character: the first and last heart event, the love confession and the married life sequence. The translations of each of these scenarios were analysed, along with how the respective characters were linguistically portrayed. The study found that although many characters were found to retain most of their original linguistic profiling in translation, there were instances where misconception of the source text could have been a factor. The translations where this rather than a different linguistic profile altered the character’s perception, the translations were often ST-oriented. In translations where the characterisation had been unaltered, predominantly it seemed the result of a critical distance from the ST and willingness on the translator’s part to take creative liberties. Role language is an integral feature of Japanese popular fiction, and it would seem that the fictional realms of video games are no exception. Although this thesis has studied only a limited sample, it would not be entirely out of line to draw the initial conclusion that to take a step back from the source material and instead focus on conveying a perception of a character rather than follow the written script, seems to result in a character portrayal in the target text similar to that in the source text.Denna uppsats ämnar introducera översättning av rollspråk som en del av spellokalisering. Det finns inte mycket skrivet om rollspråk i översättning från japanska till engelska, och inget som åsyftar rollspråk i spel. Det finns även en märkbar brist på studier som behandlar översättning som slutprodukt inom sammanhanget spellokalisering. Genom att analysera utvalda karaktärer från Bokujō Monogatari: Hajimari no Daichi till Nintendo 3DS och hur deras respektive rollspråksprofiler ter sig i översättning, är förhoppningen att denna uppsats ska tjäna som ett första steg mot ett nytt område inom spellokalisering. Åtta karaktärer, fyra manliga och fyra kvinnliga, valdes ut och analyserades för att bygga deras respektive rollspråksprofiler. Fyra videoklipp valdes ut per karaktär, första och sista hjärte-händelsen, kärleksbekännelsen, och livet som gifta. Översättningarna av dessa analyserades, tillsammans med hur de respektive karaktärerna framställdes språkligt. Studien fann att trots att flera av karaktärerna i stort behöll sina ursprungliga språkprofiler i översättning, fanns det tillfällen då källtexten kan ha missuppfattats. Översättningar där detta snarare än en annorlunda framställning av karaktären var skillnaden, visade sig ofta vara mer källtextsorienterade. I översättningar där karaktäriseringen tedde sig likartad, verkar det vara resultatet av ett kritiskt omdöme och avstånd från källtexten tillsammans med översättarens villighet att ta sig friheter med källan. Rollspråk är en väsentlig del i japansk populärlitteratur och populärkultur, och det verkar inte som att spel i sammanhanget skulle vara något undantag. Trots att denna uppsats endast har analyserat ett begränsat urval verkar det inte helt omöjligt att kunna dra en första slutsats där att ta ett steg tillbaka från källtexten och istället lägga fokus på att förmedla en uppfattning av en karaktär, snarare än det skrivna manuset, mycket väl kan leda till en karaktärisering i måltexten som är mer lik samma i källtexten.
22
Lindström, Daniel, and Henrik Hedlund. "Webbsida med interaktiv banguide." Thesis, Linköping University, Department of Science and Technology, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2244.
Full textAbstract:
This degree project is made for Sundbyholms Golf&Country Club in Eskilstuna. The aim of the report is to produce a website which include a golf course interactive guide and an online game. Programs that have been used during the project are Adobe Photoshop, Macromedia Dreamweaver, Macromedia Director, Discreet 3DS Max and the plug-in 3DS Max Exporter. The choice of programs are based on experience and knowledge from the university education Media and Communication Engineering at Linköping University.
The golf course guide contains a 2D-guide (image) and a 3D-guide (interactive image). The guides have an image overview of each hole, with liked key points to photograph’s. The photos gives the user a physical view of the course. In the 3D-guide the visitor can “look around” in the view. The interactiv photo is created in 3DS Max combined with Director. The online game, Minituregolf, was programed in Directors own language Lingo.
23
Clarke, K. L. "Validating the Developmental, Diagnostic and Dimensional Interview - Short Form Adult Version (3Di-sva) : a diagnostic interview for autism spectrum disorders in adults." Thesis, University College London (University of London), 2015. http://discovery.ucl.ac.uk/1471040/.
Full textAbstract:
Department of Health (2010) guidelines highlight the importance of diagnosis for adults with autism spectrum disorders (ASD) who have not previously had their condition recognised. Reliable, valid and user-friendly diagnostic tools must therefore be available. Part 1: This section critically appraises and systematically reviews 12 studies examining the NICE (2012) recommended adult ASD diagnostic tools. It concludes that there is good evidence to support the use of the Ritvo Asperger Diagnostic Scale-Revised(RAADS-R) and Autism Diagnostic Observation Schedule (ADOS), with some support for the use of the Autism Diagnostic Interview-Revised (ADI-R). However the Adult Asperger Assessment (AAA), Asperger Syndrome Diagnostic Interview (ASDI) and Diagnostic Interview for Social and Communication Disorders (DISCO) appear to have insufficient evidence at present. Further research is indicated for all the instruments. Part 2: This section presents a study of a new informant report diagnostic tool, the Developmental, Diagnostic and Dimensional Interview - Short Form Adult Version (3Di-sva). The 3Di-sva interview was completed with an informant for 27 ASD and 27 non-clinical comparison participants. It demonstrated good psychometric properties, including good internal consistency and inter-rater reliability, and strong sensitivity and specificity. The 3Di-sva is a time and cost-efficient tool, which could be suitable for use as part of a multi-dimensional adult ASD assessment. The study was completed as part of a joint project with McKenner (2015), who examined the 3Di-sva when used in a clinical comparison population. Part 3: This section is a critical appraisal which reflects upon areas relevant to both the literature review and empirical paper. The main focus of the discussion is upon on the idea of ideal versus achievable research and upon my learning process about research within NHS settings.
24
Jego, Jean-François. "Interaction basée sur des gestes définis par l'utilisateur : Application à la réalité virtuelle." Phd thesis, Ecole Nationale Supérieure des Mines de Paris, 2013. http://pastel.archives-ouvertes.fr/pastel-00944726.
Full textAbstract:
Ces travaux de recherche proposent une nouvelle méthode d'interaction gestuelle. Nous nous intéressons en particulier à deux domaines d'application : la thérapie à domicile par la réalité virtuelle et les arts scéniques numériques. Nous partons du constat que les interfaces standardisées ne sont pas adaptées à ces cas d'usage, car elles font appel à des gestes prédéfinis et imposés. Notre approche consiste à laisser la possibilité à l'utilisateur de faire apprendre ses gestes d'interaction par le système. Cela permet de prendre en compte ses besoins et aptitudes sensorimotrices. L'utilisateur réutilise ensuite son langage gestuel appris par le système pour interagir dans l'environnement virtuel. Cette approche pose des questions de recherche centrées sur la mémorisation, la rétroaction visuelle et la fatigue. Pour aborder ces trois aspects, nous étudions d'abord le rôle de l'affordance visuelle des objets et celui de la colocalisation dans la remémoration d'un corpus de gestes. Ensuite, nous évaluons l'influence de différents types de rétroactions visuelles sur l'évolution des gestes répétés par l'utilisateur dans une série de tâches de manipulation. Nous comparons également les performances entre des gestes d'amplitude réaliste et des gestes d'amplitude faible pour effectuer la même action. Aussi, nous attachons une importance à rendre l'interface accessible en utilisant des dispositifs bas coûts et peu intrusifs. Nous explorons les moyens de pallier les contraintes techniques liées aux systèmes peu performants. Pour cela, nous avons conduit des expériences où plus de six mille gestes proposés par une quarantaine d'utilisateurs ont été étudiés.
25
Міщенко, Я. Я. "Інтерактивний квест-додаток для візуалізації інтер'єру музею-садиби Івана Котляревського м. Полтава." Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/81414.
Full textAbstract:
Тема роботи: "Інтерактивний квест-додаток для візуалізації інтер'єру музею-садиби Івана Котляревського м. Полтава". Провелись дослідження сфери роботи та аналіз предметної області, здійснено порівняння схожих робіт. Встановлено мету та перелік всіх задач, здійснено вибір методу, завдяки якому проект вдалось реалізувати. Спроектовано та додано елементи інтер’ру візуалізацію та додавання інтерактивних елементів. Детально викладено всі кроки по практичному втіленню проекту в життя в хронологічному порядку, перераховано застосовані інструменти. Результатом реалізації даного проекту став готовий квест-додаток з візуалізованим інтер'єром музею-садиби Івана Котляревського м. Полтава. Вона включає в себе окремі елементи декору, заплановані кімнати згідно оригінального музею, ігрові елементи.
26
Andersson, Björn, and Martin Valfridsson. "Digital 3D Facial Reconstruction Based on Computed Tomography." Thesis, Linköping University, Department of Science and Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2862.
Full textAbstract:
Despite the introduction of DNA-analysis for identification of human remains (1997-2000) several cases exist where the deceased remain unidentified. Approximately ten percent of unknown deceased persons can not be identified by dental status or other present methods. During the year 2003 alone, seven individuals, in Sweden, remain unidentified.
Increase in travel in Europe will lead to more discoveries of foreign human remains in Sweden. In these cases, dental and medical records are often unavailable for the identification process. When reconstructing a face from a skull, a technique with so called landmarks is used. These landmarks define the distance between the skull and the skin.
Today the reconstruction is performed by a forensic artist applying modelling clay to a cast of the skull according to the placement of the landmarks. This method is considered unethical since it involves manipulation of the skull. Another drawback with this method is that it is very time consuming and changes and modifications of the model are hard to do.
This thesis presents the possibilities of digitally, in 3D, reconstructing deceased persons'faces based on computed tomography of skulls. This is done by presenting our PC based 3D modelling tool that we have implemented in Discreet 3ds max. By developing and testing our software we have shown that digital 3D facial reconstruction can be performed by acquiring data from CT and performing the reconstruction process in 3ds max withhelp from our software.
27
Cleve, Oscar, and Aleks Durowicz. "Increasing Commitment during PLM Implementation through Change Management : A Case Study at Dassault Systèmes." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-296356.
Full textAbstract:
Product Lifecycle Management (PLM) is a way for manufacturing companies to counter the challenge of managing product information through its lifecycle. Change management is often overlooked during PLM implementations. This can lead to project failure and negative consequences for organizations. Additionally, one shortcoming of change management in PLM implementation is not considering individual commitment to change. Therefore, this case study’s purpose was to explore how change management can increase end-user commitment and thereby contribute to improved PLM implementations. This was investigated by performing a qualitative case study of Dassault Systèmes and their PLM implementation project at four different customer organizations: Saab Dynamics, Jaguar Land Rover, Scania, and Ericsson. Sixteen individuals involved in the PLM projects, evenly distributed between Dassault Systèmes’ employees and customer representatives, were interviewed. The collected data was analyzed using a theoretical framework based on change management and commitment. The study identified four key areas of change management for increasing end-user commitment during PLM implementation: (1) vision, (2) top management, (3) training, and (4) individual treatment. An overview of the suggested recommendations within each area is: (1) a specific vision and a sense of urgency should be created and communicated; (2) top management, including the CEO, should be committed to the project and communicate to the end-users; (3) training should be continuous, adapted to the end-users and include other purposes that teaching about the PLM tool; and (4) different end-users should be managed differently and be included in implementation project. These conclusions contribute to the research field of PLM implementation by improving the understanding of how change management can increase the end-users’ commitment in PLM implementation projects.Product Lifecycle Management (PLM) är ett sätt för tillverkande företag att möta sina utmaningar med att hantera produktinformation genom produktens livscykel. Förändringsledning förbises ofta under PLM-implementationer. Detta kan leda till misslyckade projekt och negativa konsekvenser för organisationer. En ytterligare brist i förändringsledningen inom PLM-implementationer är att inte ta hänsyn till individuellt engagemang till förändring. Därför var den här fallstudiens syfte att utforska hur förändringsledning kan öka slutanvändarnas engagemang och därigenom bidra till förbättrade PLM-implementationer. Detta undersöktes genom att utföra en kvalitativ fallstudie av Dassault Systèmes och deras PLM-implementationsprojekt hos fyra olika kundorganisationer: Saab Dynamics, Jaguar Land Rover, Scania och Ericsson. Sexton individer som var involverade i PLM-projekten, jämnt fördelade mellan Dassault Systèmes-anställda och kundrepresentanter, intervjuades. De insamlade uppgifterna analyserades med hjälp av ett teoretiskt ramverk baserat på förändringsledning och engagemang. Studien identifierade fyra viktiga områden inom förändringsledning för att öka slutanvändarens engagemang under PLM-implementationer: (1) vision, (2) företagets ledning, (3) utbildning och (4) individuell behandling. En översikt över de föreslagna rekommendationerna inom varje område är: (1) en specifik vision och en känsla av brådska bör skapas och kommuniceras; (2) företagets ledning, inklusive VD:n, bör vara engagerad i projektet och kommunicera till slutanvändarna; (3) utbildningen bör vara kontinuerlig, anpassad till slutanvändarna och inkludera andra syften än att lära ut PLM-verktyget; (4) olika slutanvändare bör hanteras annorlunda och inkluderas i implementationsprojektet. Dessa slutsatser bidrar till forskningen inom PLM-implementationer genom att förbättra förståelsen för hur förändringsledning kan öka slutanvändarnas engagemang i PLM-implementationsprojekt.
28
Васюхно, К. В. "Інтерактивний квест-додаток для популяризації заходів легкоатлетичного манежу СумДУ." Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81422.
Full textAbstract:
Дипломний проект присвячений розробці інтерактивного квест-додатку з використанням 3D моделі легкоатлетичного манежу СумДУ. В роботі проведено аналіз предметної області з аналізом існуюих аналогів проєкту, визначення мети проекту, засобів реалізації, планування та проектування роботи. Представлена поетапна розробка високоякісної 3D моделі, показані налаштування та призначення матеріалів та текстур, налаштування оточення та рендерінг зображень ракурсів. Також представлена поетапна розробка інтерактивного квсет-додатку, показані налаштування сцени, матеріалів, ландшафту, створення персонажа, питань зашифрованих підказками, реалізація логіки гри. Після реалізації проекту проведено огляд квест-додатку на відповідність якості. Результатом проведеної роботи є інтерактивний квест-додаток для популяризації заходів легкоатлетичного манежу СумДУ з файлами гри.
29
Криштоп, М. О. "Платформа з вивчення зразків озброєння та військової техніки." Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/71866.
Full textAbstract:
Дипломний проект присвячений розробці платформи з вивчення бойової машини ПТРК 9П149. В роботі проведено аналіз існуючих платформ та тренажерів з різного виду озброєння, а також проведено проектування платформи.
В роботі представлено створення 3D зразка бойової машини, текстурну розгортку корпусу та окремих елементів, анімацію ураження цілі та руху ПТРК 9П149. Процес імпорту моделі та різних видів анімації до UNREAL ENGINE 4. Результатом проведеної роботи є створення платформи з вивчення зразків озброєння та військової техніки з можливістю подальшого створення рівнів та її наповнення новими зразками техніки.
30
Черевко, Д. П. "Інформаційна технологія проектування віртуального музею комп’ютерної техніки." Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/76431.
Full textAbstract:
Обране програмне забезпечення для створення 3d моделей. Після аналізу недоліків та
переваг сучасних програм для реалізації віртуального музею було вибір впав на програму
Autodesk 3ds Max, що дозволяє створювати найскладніші 3д моделі з максимальної чіткістю та
реалістичністю.
Обраний метод інтеграції 3d моделі в веб додаток. Ним послугував компонент Verge3D.
Використовуючи сучасне рішення для WebGL Verge3D можна досягти економії місця на сервері
завдяки можливості зберігання об’єктів в хмарному сховищі та легко інтегрувати у веб додаток.
Обраний метод створення веб-додатку. Після аналізу сучасних фреймворків для створення
веб сервісів для реалізації віртуального музею було обрано Spring Framework в тому числі Spring
MVC, Spring Data JDBC, Spring Security.
Поєднано вибрані методи рішення в одну інформаційну технологію. Створено технологію
роботи інформаційної системи. Розробленні схеми та діаграми для веб додатку.
Було розроблене програмне забезпечення для функціонування віртуального музею, а
також протестована розроблена інформаційна система.
31
Арістархов, В. С. "Віртуальна екскурсія секцією інформаційних технологій проектування Сумського державного університету." Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/81987.
Full textAbstract:
Пояснювальна записка складається зі вступу, 4 розділів, висновків, списку використаних джерел із 31 найменувань, одного додатку. Загальний обсяг роботи − 52 сторінки, у тому числі 42 сторінки основного тексту, 3 сторінки списку використаних джерел, 8 сторінок додатку.
В проекті було проведено аналіз віртуальних екскурсій, які є види, переваги та недоліки, сформульовано мету роботи та визначені задачі проекту, а також були обрано засоби реалізації роботи.
Також були проведені всі етапи планування даного проекту та проектування.
Розроблено календарний план робіт та були визначені ризики проекту. Розроблені діаграми у нотації IDEF0 і Use Case діаграму.
Виконана розробка моделювання об’єктів, їх візуалізацію та експорт\імпорт до ігрового рушія. Проведено налаштування сцен та розроблено логіку роботи додатку.
Результатом проведеної роботи є створений додаток віртуальної екскурсії секції ІТП Сумського державного університету, який дозволяє оглянути сцену секції, аудиторії, в яких знаходиться персонаж, та взаємодіяти з анімованими об’єктами сцен.
Практичне значення роботи полягає у тому що створена віртуальна екскурсія може бути використана для ознайомлення із секцією ІТП користувачами, яких цікавить ця спеціальність.
32
Azevedo, Marco Antonio de. "Modelagem facial 3D foto-realista para utilização em mídias de alta definição." reponame:Repositório Institucional da UFSC, 2012. https://repositorio.ufsc.br/handle/123456789/106781.
Full textAbstract:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Comunicação e Expressão, Programa de Pós-graduação em Design e Expressão Gráfica, Florianópolis, 2012Made available in DSpace on 2013-12-05T22:20:43Z (GMT). No. of bitstreams: 0 Previous issue date: 2012
A modelagem 3D vem sendo muito utilizada na indústria de cinema e vídeo de alta definição de imagem. O rápido avanço tecnológico de computadores e aplicativos 3D tem permitido criar imagens cuja aparência se assemelha a uma imagem real, tal qual uma foto. Personagens 3D estão substituindo atores e dublês reais, permitindo a geração de cenas perigosas ou mesmo cenas antes impossíveis.Tendo como base os softwares 3D para a geração do modelo virtual e tendo em vista a gama de ferramentas que eles proporcionam para produzirem-se infinitos objetos via computador, esta pesquisa tem como principal objetivo propor processos de modelagem facial 3D foto-realista para utilização em animação em mídias de alta definição.A fim de atender ao objetivo geral exposto, foi realizada uma pesquisa-ação, que possui características tanto da prática rotineira, quanto da pesquisa científica. Do ponto de vista da natureza, trata-se de uma pesquisa classificada como aplicada, gerando conhecimentos para a aplicação prática. Em relação a abordagem, esta pesquisa é classificada como qualitativa.Desta forma, com base na fundamentação teórica, identificou-se os principais métodos de desenvolvimento de um modelo virtual 3D. Em se-guida, determinou-se recursos que permitam aumentar visualmente o realismo da imagem final. Por fim, o modelo desenvolvido foi aplicado
Abstract: The 3D modeling has been widely used in the industry of film and high definition video image. The rapid technological advancement of compu-ters and 3D applications has allowed to create images whose appearance resembles a picture just like a real photo. 3D characters are replacing real actors and stuntmen, allowing the generation of stunt scenes before or even impossible.Based on the 3D software to generate the virtual model and in view of the range of tools they provide up to produce infinite objects via compu-ter, this study discusses about construction of 3D human face modeling from a leading 3D software market media and digital entertainment today.Starting with a theoretical basis about the tools and technologies for the production of 3D modeling, this research addresses the entire process of building a 3D facial modeling photo-real animation for use in high-definition media.Aspects of modeling techniques, the photography use on textures, as well as the physical the physical aspects that have some correspondence to the real world within the virtual 3D environment such as lighting systems, are addressed in this research.The survey ends with the 3D model built, represented in a digital image rendered.
33
Forsman, Maria, and Emma Stråle. "Produktionsflöde för rendering av bilder i katalogproduktion." Thesis, Linköping University, Department of Science and Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-4029.
Full textAbstract:
På IKEA går produktionsflödet för en produktbild i dagsläget från konstruktionsritning till fotografering via tillverkning och montering. En produkt som är färdig för tillverkning definieras av sin mekaniska konstruktion och sina ytegenskaper. Ledtiden och kostnaden för bildproduktionen skulle kunna minskas betydligt om produkten kunde avbildas redan i detta stadium, utan att finnas tillverkad. För detta ändamål såg IKEA en möjlighet i att introducera ett nytt produktionsflöde där avancerad datorgrafik, grafisk teknik och bildbehandling omvandlar konstruktionsritningen till produktbild. Ambitionen är att från ritningen ta ut en 3D-modell, placera den i en omgivning, ljussätta och belägga den med material och av detta skapa en tryckbar produktbild som uppfyller företagets höga kvalitetskrav.
Syftet med examensarbetet var att ta fram förslag på ett konkret sådant flöde genom att undersöka olika programvaror som skulle kunna användas samt att identifiera problemområden och komma med lösningsförslag på dessa. Flödet delades upp i de fem problemområdena konvertering, modellering, ljussättning, material och rendering som bearbetades parallellt. Fokus har under hela projektet legat på färghantering och upplevd bildkvalitet genom att korrekt färg- och detaljåtergivning i bilderna varit pekpinne och ledsagare.
Konstruktionsritningarna som görs i SolidWorks har konverterats till 3D-modeller med programvaran PolyTrans. I 3ds max har produktmodellerna satts in i en miljö som liknar den verkliga fotostudion, belysts och belagts med material. Efter en studie av olika programvaror för rendering beslutades det att mental ray skulle användas varpå alla bilder skapats med denna. mental ray är en komplex renderare som beräknar ljussättning fysikaliskt riktigt vilket bidrar till fotorealistiska bilder.
Examensarbetet handlade till mångt och mycket om att köra olika produkter genom flödet och testa med olika inställningar i de olika stegen. Flödet utvärderades kontinuerligt genom att bilderna som kom ut bedömdes visuellt. Dessutom genomfördes några tester för att undersöka inblandade programvarors eventuella brister vad gäller färghantering och upplevd bildkvalitet. Det slutliga resultatet av examensarbetet blev ett flöde som i stor utsträckning liknar arbetsflödet vid nuvarande bildproduktion. Med minimal insats från retuschavdelningen uppfyller bilderna de krav som ställs för att de skall kunna tryckas i IKEA katalogen.
34
Горулько, Я. В. "Віртуальна 3D екскурсія прес-центром Сумського державного університету." Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75641.
Full textAbstract:
Дипломний проект присвячений розробці віртуальної 3D екскурсії прес-центром Сумського державного університету з файлами для подальшої демонстрації. В роботі проведено аналіз стану питання віртуальних екскурсій, сформульовано мету та задачі проекту, обрано засоби реалізації, проведені етапи планування та проектування виконуваного проекту і безпосередньо наведені етапи його реалізації. А саме показані етапи моделювання сцен та їх об’єктів, візуалізації та імпорту до ігрового рушія. Проведено налаштування сцен та розроблено логіку роботи додатку віртуальної екскурсії. Результатом проведеної роботи є створений додаток віртуальної 3D екскурсії прес-центром Сумського державного університету, що дозволяє оглянути сцену конгрес-центру у двох режимах (нічний та денний), сцену обраної аудиторії, взаємодіяти з анімованими об’єктами сцен та переглянути візуалізації обраного варіанту аудиторії. На основі даної віртуальної екскурсії може бути розроблений повноцінний інтерактивний додаток для підтримки планування заходів прес-центру СумДУ.
35
Thorvaldson, Niclas, and Daniel Persson. "Utformning av konst- och musikhus med läge i unik miljö." Thesis, Linnéuniversitetet, Institutionen för teknik, TEK, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-12526.
Full textAbstract:
Examensarbetets mål var att utforma två förslag på ett musik- och konsthus för placering i Växjösjön. Konstruktionen ämnas vara flytande och mobil.Gemensamt undersökte författarna byggnadens förutsättningar och möjligheter, i syfte att underlätta utformningsprocessen. Författarna utformade var sitt förslag. Det resulterade i två förslag med skilda arkitektoniska särdrag, skapade utifrån gemensamt stipulerade avgränsningar.Det ena förslaget är utformat med hjälp av geometriska former med raka sidor. Det kontrasterar mot det andra förslaget som har organiska och mjuka former.The purpose of this thesis was to produce two alternative architectural designs, of a building, that will house various exhibitions and activities. Mainly those will be culture related; music and arts. The building is to be located in a Swedish lake, called Växjösjön, and the structure is intended to be placed on a floating hull.Initially the authors investigated, and discussed, what possibilities and limitations that were associated with the building. The authors then, separate from one another, created one alternative design each.The first of the two designs found its inspiration in different geometrical shapes, whereas the other was more of an organic design with a smooth and flowing architecture.
De digitala ritningarna finns att tillgå från författarna på begäran.
36
Aghaee, Ghaleshahi Nima. "Thermal Issues in Testing of Advanced Systems on Chip." Doctoral thesis, Linköpings universitet, Institutionen för datavetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-120798.
Full textAbstract:
Many cutting-edge computer and electronic products are powered by advanced Systems-on-Chip (SoC). Advanced SoCs encompass superb performance together with large number of functions. This is achieved by efficient integration of huge number of transistors. Such very large scale integration is enabled by a core-based design paradigm as well as deep-submicron and 3D-stacked-IC technologies. These technologies are susceptible to reliability and testing complications caused by thermal issues. Three crucial thermal issues related to temperature variations, temperature gradients, and temperature cycling are addressed in this thesis. Existing test scheduling techniques rely on temperature simulations to generate schedules that meet thermal constraints such as overheating prevention. The difference between the simulated temperatures and the actual temperatures is called temperature error. This error, for past technologies, is negligible. However, advanced SoCs experience large errors due to large process variations. Such large errors have costly consequences, such as overheating, and must be taken care of. This thesis presents an adaptive approach to generate test schedules that handle such temperature errors. Advanced SoCs manufactured as 3D stacked ICs experience large temperature gradients. Temperature gradients accelerate certain early-life defect mechanisms. These mechanisms can be artificially accelerated using gradient-based, burn-in like, operations so that the defects are detected before shipping. Moreover, temperature gradients exacerbate some delay-related defects. In order to detect such defects, testing must be performed when appropriate temperature-gradients are enforced. A schedule-based technique that enforces the temperature-gradients for burn-in like operations is proposed in this thesis. This technique is further developed to support testing for delay-related defects while appropriate gradients are enforced. The last thermal issue addressed by this thesis is related to temperature cycling. Temperature cycling test procedures are usually applied to safety-critical applications to detect cycling-related early-life failures. Such failures affect advanced SoCs, particularly through-silicon-via structures in 3D-stacked-ICs. An efficient schedule-based cycling-test technique that combines cycling acceleration with testing is proposed in this thesis. The proposed technique fits into existing 3D testing procedures and does not require temperature chambers. Therefore, the overall cycling acceleration and testing cost can be drastically reduced. All the proposed techniques have been implemented and evaluated with extensive experiments based on ITC’02 benchmarks as well as a number of 3D stacked ICs. Experiments show that the proposed techniques work effectively and reduce the costs, in particular the costs related to addressing thermal issues and early-life failures. We have also developed a fast temperature simulation technique based on a closed-form solution for the temperature equations. Experiments demonstrate that the proposed simulation technique reduces the schedule generation time by more than half.
37
Rackwitz, Anja, and Markus Sterner. "Photorealistic Rendering with V-ray." Thesis, University of Gävle, Department of Mathematics, Natural and Computer Sciences, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-156.
Full textAbstract:
What makes an image photorealistic and how to pinpoint and understand how our mind interprets different elements in an image conditions? It is proposed that the phrase "imperfect makes perfect" is the key for the photorealistic goal in today’s 3D. There is a review of all the elements for the creation of one perfect image, such as Global Illumination, Anti-Aliasing and also a basic review of photography, how a scene is set up, color temperature and the nature of the real light. To put different theories to a test, the common three dimensional software 3D Studio Max was used with the V-Ray renderer. On a field trip to IKEA communications, we were assigned a project of a room scene containing a kitchen, with a finished scene model. A kitchen was created and experimented to reach a result where there is no visible difference between a computer generated image and the photography. Our result was not what we had hoped for due to many problems with our scene. We ourselves see this as a first step toward a scientific explanation to photorealism and what makes something photorealistic.
38
Leal, Anamary. "Exploring the effectiveness of 3D file browsing techniques for file searching tasks." Honors in the Major Thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETH/id/1285.
Full textAbstract:
This item is only available in print in the UCF Libraries. If this is your Honors Thesis, you can help us make it available online for use by researchers around the world by following the instructions on the distribution consent form at http://library.ucf.edu/Systems/DigitalInitiatives/DigitalCollections/InternetDistributionConsentAgreementForm.pdf You may also contact the project coordinator, Kerri Bottorff, at kerri.bottorff@ucf.edu for more information.Bachelors
Engineering and Computer Science
Early Childhood Education
39
Laha, Bireswar. "Immersive Virtual Reality and 3D Interaction for Volume Data Analysis." Diss., Virginia Tech, 2014. http://hdl.handle.net/10919/51817.
Full textAbstract:
This dissertation provides empirical evidence for the effects of the fidelity of VR system components, and novel 3D interaction techniques for analyzing volume datasets. It provides domain-independent results based on an abstract task taxonomy for visual analysis of scientific datasets. Scientific data generated through various modalities e.g. computed tomography (CT), magnetic resonance imaging (MRI), etc. are in 3D spatial or volumetric format. Scientists from various domains e.g., geophysics, medical biology, etc. use visualizations to analyze data. This dissertation seeks to improve effectiveness of scientific visualizations.
Traditional volume data analysis is performed on desktop computers with mouse and keyboard interfaces. Previous research and anecdotal experiences indicate improvements in volume data analysis in systems with very high fidelity of display and interaction (e.g., CAVE) over desktop environments. However, prior results are not generalizable beyond specific hardware platforms, or specific scientific domains and do not look into the effectiveness of 3D interaction techniques.
We ran three controlled experiments to study the effects of a few components of VR system fidelity (field of regard, stereo and head tracking) on volume data analysis. We used volume data from paleontology, medical biology and biomechanics. Our results indicate that different components of system fidelity have different effects on the analysis of volume visualizations. One of our experiments provides evidence for validating the concept of Mixed Reality (MR) simulation.
Our approach of controlled experimentation with MR simulation provides a methodology to generalize the effects of immersive virtual reality (VR) beyond individual systems. To generalize our (and other researchers') findings across disparate domains, we developed and evaluated a taxonomy of visual analysis tasks with volume visualizations. We report our empirical results tied to this taxonomy.
We developed the Volume Cracker (VC) technique for improving the effectiveness of volume visualizations. This is a free-hand gesture-based novel 3D interaction (3DI) technique. We describe the design decisions in the development of the Volume Cracker (with a list of usability criteria), and provide the results from an evaluation study. Based on the results, we further demonstrate the design of a bare-hand version of the VC with the Leap Motion controller device. Our evaluations of the VC show the benefits of using 3DI over standard 2DI techniques.
This body of work provides the building blocks for a three-way many-many-many mapping between the sets of VR system fidelity components, interaction techniques and visual analysis tasks with volume visualizations. Such a comprehensive mapping can inform the design of next-generation VR systems to improve the effectiveness of scientific data analysis.Ph. D.
40
Černý, Miloš. "Komplexní animace v 3D Studiu Max." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-236931.
Full textAbstract:
The goal of this project is to inform a reader about compact workflow of creating complex computer animation using 3D modelling and animation software 3ds Max. It guides him through the whole process from creating models, texturing and skinning them, to animation pointed at more difficult parts of the animation process. Beside the practical examples, this paper includes necessary theoretical explanation of particular problems. After reading this paper, the reader should be well acquainted with the compact process of creating the complex animation.
41
Ševčík, Martin. "3D závodní hra pro platformu Android." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2013. http://www.nusl.cz/ntk/nusl-236353.
Full textAbstract:
This master's thesis deals with the possibilities of using open source 3D game engine Java Monkey Engine (jME) in developing applications for the Android platform. It includes theoretical knowledge for the jMonkey Engine architecture and the Android platform. In the following section, the thesis describes used techniques and external libraries in solving issues of interaction between jME and Android platform and of working with objects in the 3D scene and their way of implementation.
42
Bergonzoni, Giacomo. "(at)tendaendo Il Cielo, progetto per una chiesa a Ottawa." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/5494/.
Full textAbstract:
Progetto per una chiesa cattolica ad Ottawa, capitale del Canada. Nel lotto dove sorgeva la chiesa di Saint Charles su Beechwood Avenue, nel quartiere storicamente francofono di Vanier, si è progettata la nuova chiesa con le annesse opere parrocchiale. Dopo un'attenta analisi del sito sono state identificate le peculiarità storiche, paesaggistiche e socio-culturali della chiesa esistente e nel nuovo progetto si valorizzano i punti di forza del precedente edificio e li si integrano con un'architettura contemporanea. L'architettura sacra è stata sviluppata facendo riferimento all'archetipo della tenda che è, fin dalle origine della soria della salvezza cristiana, il tempio in cui Dio si rivela e in cui si rende presente fra gli uomini: "E il Verbo si fece carne e pose la sua tenda in mezzo a noi" (Giovanni 1, 14)
43
Líbal, Jan. "Využití termovizní kamery pro měření teploty elektrických strojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217964.
Full textAbstract:
The master‘s thesis deals with utilization of infrared camera for temperature measurement of electrical machines. The first part describes non-contact temperature measuring, the second part describes principle of sensors that evaluate quantity of incident infrared radiation. In the next part there is termovision camera SAT-HY 6800 presented and the instructional manual for SAT Report computer programme created. This computer programme is used for analyzing of termovision pictures from the SAT-HY 6800 termovison camera. The chapter 7 describes temperature measuring of one-phase asynchronous motor type J22TO484. The chapter 8 describes temperature measuring of semiconductor components of EC motor G6 series. Both of these motors are produced by ATAS elektromotory Náchod a.s. The last part of the thesis describes creation of animation of one-phase asynchronous motor type J22TO455. The animation was created in 3ds Max computer programme.
44
Stein, Amelie. "Peptime-mediated interactions in high-resolution 3-dimensional structures." Doctoral thesis, Universitat Pompeu Fabra, 2010. http://hdl.handle.net/10803/7218.
Full textAbstract:
Proteins and protein interactions are involved in virtually all processes of life. Here we study interactions between globular domains and short linear motifs, which form a small interface ideal for transient interactions. Despite the small number of contacts involved, these domain-motif interactions (DMIs) are known to be highly specific in vivo. We have identified hundreds of instances of DMIs in high-resolution 3-dimensional (3D) structures to analyze the molecular basis of their high specificity. Furthermore, we have derived structural parameters to identify DMIs in 3D structures in a more general, motif-independent way. An important class of DMIs are kinase-substrate interactions. By combining the phosphorylation motif with different kinds of contextual information, we could predict substrates of the human kinase Aurora A. Lastly, we have incorporated DMIs into our database of 3D interacting domains (3did) to disseminate our results to the scientific community for future research. Los procesos moleculares subyacentes a la mayoría de funciones biológicas implican la participación directa de una infinidad de proteínas y múltiples interacciones entre ellas. En esta tesis estudiamos un tipo particular de estas interacciones, de carácter transitorio y altamente específicas, dónde un dominio globular en una proteína reconoce un corto péptido lineal en otra (DMIs). En concreto, identificamos múltiples casos de DMIs en estructuras tridimensionales (3D) de alta resolución y analizamos las bases moleculares de su especificidad. Además, derivamos parámetros estructurales globales que nos permiten identificar nuevos casos de DMIs. Así mismo, y como caso práctico, combinamos el motivo de fosforilación propio de la quinasa humana Aurora A con diversas clases de información contextual para predecir y validar 90 nuevos substratos. Por último, incorporamos las caracterizadas DMIs en nuestra base de datos de interacciones en 3D (3did) con el fin de diseminar nuestros resultados entre la comunidad científica.
45
Febriansyah and 宜安. "The Applications of 3ds max In Architectural Design Practice." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/79ngy6.
Full textAbstract:
碩士國立臺灣科技大學
建築系
102
Architectural design plays a significant role in the components and elements of a structure to unify whole coherent and functional. In architecture, planning and designing are processes that performed simultaneously to facilitate future construction. Creative manipulation and coordination of material involve tools are assessed in terms of their ease of use (e.g. previous knowledge required, complexity of geometry input, etc.), efficiency (e.g. speed, render capabilities, etc.) and outcomes (e.g. presentation of results), etc. The study is based on the experiences in designing buildings for several competitions using 3ds Max software. There four steps in term of application 3ds Max as methodology for designing process that discussed in this paper are sketch, digital modeling, material, analysis day lighting and interior lighting. The result revealed some advantages architectural design process on utilization of 3ds Max software. First benefit is modelling that assists in locating mass of building form and eases in manipulating concept form. Second is implementation of material in design that affect lighting and visualization result. Third result is the proper use of light of exterior and interior light, and also recommendations building orientation. Final result is regulation of good visualization and animation in architectural design explanation. The potential of using 3ds Max shows opportunity to make large-scale changes in the final design process. It is possible to do almost whole analyses that needed in design process. All of the analyses that have been done is no longer valid since the shape and orientation of the building has changed
46
Hock-KietWong and 王福杰. "Application of 3Di Model on Inundation Real-time Forecast." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/rqvbh9.
Full textAbstract:
碩士國立成功大學
水利及海洋工程學系
106
Due to Climate change issues, nowadays during Typhoon season or Heavy Rain season in Taiwan often happened Inundation in Urban Area. Among the Factor of urban development, a lot of public space have been limited to the use of inundation prevention, such as to build detention pond or diversion facility . As a result, plenty of inundation model perform well using in Taiwan for urban or rural area, such as Hec-Ras, Sobek, Physiographic Inundation Model, Mike11 ect. Some of their input data are point data convert into spatial distribution data from Rain-gauge station(Kai-chen Chien, 2016 ＆ Meng-Hsuan Wu, 2013). Since 2005 years Taiwan Center Weather Bureau have developed Severe Weather Monitoring System(QPESUMS) which provide spatial distribution data with 1.3km*1.3km resolution, as it’s input data for inundation model would perform better then rain-gauge station data(Shu-Wei Wu,2007 ＆ Wen-Jye Leu,2018). In this study, we using 3Di Inundation Real-time Model combine with QPESUMS spatial distribution rainfall data as input data to forecast the inundation area in Tainan San-ye Basin. By using the survey data such as rainfall volume, water level in drainage system, inundation area of 2017 years Typhoon Haitang as model calibration and 2014 years 0812 Heavy Rain, 2016 years Typhoon Megi and 2018 years 0619 Heavy Rain as model verification. In the result for this study, we found that 3Di Inundation Real-time Model performed well in water level and inundation area simulation. Then it just take 15 minutes to forecast 3 hours inundation situation in San-ye Basin, for the simulation speed it’s helpful for the disaster prevention and response planning.
47
CHEN, CHIEH-HSUAN, and 陳潔萱. "Using 3ds Max to Reproduce Woodworking Method – Dougong as an Example." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/89769w.
Full textAbstract:
碩士逢甲大學
應用數學系
105
Now we can still have many of the ancient woody architecture. Woodworking method is using a lot of space geometry concept to make each component can be mosaicked tightly. It can make the building stand stable without using any reinforced materials and nails. In addition to preserve the woodworking method. It is also a major issue that how to make the use of woodworking method in the present technology. Modern technology is changing with each passing day, perhaps we can use 3D technology to construct a practical building in the future. Therefore, we use the 3D technology to preserve the traditional woodworking method currently.
48
Kramárik, Jakub. "Tvorba fotorealistických V-Ray materiálů a jejich aplikace v programu 3Ds Max." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-431038.
Full textAbstract:
The thesis deals with introduction of V-Ray material properties and their production. By means of these materials it is possible to create physically accurate photorealistic surfaces of objects in visualisations in Autodesk 3Ds Max program. In the first part are described the characteristics of different surfaces and their optical properties depending on the impact of light. In this part are also analysed all V-Ray materials and their properties related specifically to visualisations of interiors. The thesis also deals with the issues of mapping onto objects and HDRI mapping. In the practical part the thesis pursues creating complex photorealistic V-Ray materials and their application on objects. In this part a tutorial for creating your own textures in grid editor is also made. In conjunction with created materials, these textures are used in a sample interior visualisation.
49
Darellas, Katherina. "Dual Master@3DS: proposal and design of a new career path at Dassault Systèmes." Master's thesis, 2019. http://hdl.handle.net/10071/19099.
Full textAbstract:
Investing in talent management is getting crucial for modern organizations due to the need
for businesses to become more strategic and competitive. Moreover, talent management is
motivated by the fact that it has been found to lead to higher corporate profits when connected
to the corporate strategy. The purpose of this project is to conceptualize a talent program at the
company Dassault Systèmes which connects the need to secure talents long-term. A survey was
concluded in support of the project. Data from 50 graduates revealed an insight of the perception
of the company Dassault Systèmes and the graduates’ expectations on the proposed project.
Moreover, the findings of the survey are compared to the project’s framework as well as to a
comprehensive literature review. The analysis leads to the project’s suggestions that Dassault
Systèmes understands the need to redefine its corporate strategy and that talent management
needs to integrate HR practices. Furthermore, long-term career paths and rewarding packages
emerged as important issues to the respondents of the survey. To guide the organization in
accelerating talent management and to support the transformation of the talent sourcing and
development policy, the project proposes a concept. Based on a developed strategy for the
company’s needs, the following is presented: Dual Master@3DS: proposal and design of a new
career path at Dassault Systèmes.O investimento tem vindo a tornar-se crucial para as organizações modernas devido à necessidade que os negócios têm de se tornarem mais estratégicos e competitivos. Adicionalmente, há uma motivação para gerir talento por este estar ligado a melhores resultados quando alinhado com a estratégia organizacional. O objetivo deste projeto é o de conceber um programa de talento na empresa Dassault Systèmes que responda à necessidade de reter talentos no longo prazo. Foi realizado um inquérito por questionário para apoiar o projeto. Os dados provenientes de 50 licenciados evidenciaram as suas perceções relativamente à empresa bem como as suas expectativas relativamente ao assunto do projeto. Adicionalmente, são comparados os resultados do inquérito com o quadro de referência do projeto bem como com a literatura revista. A análise levou a recomendações de que a Dassault Systèmes compreenda a necessidade de redefinir a sua estratégia organizacional e que a gestão de talento precisa de ser integrada nas práticas de RH. Mais ainda, emergiu a importância dos percursos de carreira de longo prazo e pacotes de recompensa para os participantes. Para guiar a organização na aceleração da gestão de talento e para apoiar a transformação da política de atração e desenvolvimento de talento, o projeto propõe um conceito. Com base numa estratégia desenvolvida para as necessidades da empresa, é apresentado o seguinte: Dual Master@3DS: proposta e desenho de um novo percurso de carreira na Dassault Systèmes.
50
Wu, Jiun-Wei, and 吳浚瑋. "Community Scaffolding Used in Modeling Study of The Effectiveness of Teaching in 3Ds MAX." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/15642735690912527510.
Full textAbstract:
碩士國立臺中教育大學
數位內容科技學系碩士班
101
The research mainly explores the "Community Scaffolding used in modeling study of the effectiveness of teaching in 3Ds MAX". Using the recently popular social network as Facebook Groups to features into teaching, that hoping to enhance students’ learning motivation and effectiveness. Therefore, the traditional scaffolding teaching combined with social network can form a large forum, including announcements, curriculum counseling, work discussions, helping with each other and competition etc. that all can be implemented on the inside. The functions like uploading pictures and files are also very well, according to give praise can encourage students, teacher can give advice and incentives to establish students’ self-confidence in order to reach the research’s goal. Moreover, it introduced the concept of inclusion and diversified teaching oriented learning evaluation exams plus, as the traditional instructional scaffolding structure to provide a more complete study reference. The study used a quasi-experimental research method to a well-known computer cram of two classes totally 40 human subjects. Mainly to learning 3D modeling explore using "Digital Learning Support website - Facebook Groups" (experimental group) and "General Scaffolding learning courses" (the control group) to find the differences between the students. In "3Ds MAX modeling basic ability test" experimental subjects were compared based abilities, then through five lessons teaching, and finally use the "3Ds MAX modeling final basic ability test" to understanding the effects between the two groups. At the same time, for the experimental group students to do semi-structured interviews to understand the "Digital Learning Support website-Facebook Groups" auxiliary 3D modeling effectiveness of teaching whether it has been affected. After the experiment, using descriptive statistics, Pearson correlation, independent samples t-test, one factor covariance and other statistical methods coupled with qualitative data analysis, obtained conclusions are as follows: 1. Through 3D modeling teaching found that in the experimental group of students use Facebook Groups auxiliary scaffolding, its motivation attitude than in the control group improved significantly. 2. In the 3D modeling capabilities of the 3D modeling teaching, the using of the Facebook Groups auxiliary scaffolding between the experimental group and the control group has no significant differences. 3. Diversified teaching strategies for the future of 3D modeling study has the potential value of their teaching aids. 4. Through the Facebook Groups auxiliary scaffolding can understand that students in the 3D modeling teaching expressed mostly positive recognition in learning attitudes and opinions. Keywords: Community Scaffolding, 3Ds MAX modeling, diversified teaching