Relevant bibliographies by topics / 3Ddigital methods and tools

Academic literature on the topic '3Ddigital methods and tools'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '3Ddigital methods and tools.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "3Ddigital methods and tools"

1

Monk, Andrew, and Steve Howard. "Methods & tools." Interactions 5, no. 2 (March 1998): 21–30. http://dx.doi.org/10.1145/274430.274434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hewes, Dean E. "Methods as Tools." Human Communication Research 29, no. 3 (July 2003): 448–54. http://dx.doi.org/10.1111/j.1468-2958.2003.tb00847.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Vora, Pawan R. "Design/Methods & Tools." Interactions 5, no. 3 (May 1998): 13–30. http://dx.doi.org/10.1145/275269.275272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bødker, Susanne, and Kim Halskov Madsen. "Methods & tools: context." Interactions 5, no. 4 (July 1998): 17–25. http://dx.doi.org/10.1145/278465.278469.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Grabiński, Tadeusz, Barbara Barszcz-Przełożny, Zbigniew Paszek, and Szczepan Urlik. "Classes evaluation: Methods and tools." Skola biznisa, no. 3-4 (2013): 78–99. http://dx.doi.org/10.5937/skolbiz1304078g.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mardare, Ileana, and Eugenia Claudia Bratu. "Measuring Stress – Methods and Tools." Acta Medica Transilvanica 25, no. 1 (March 1, 2020): 5–7. http://dx.doi.org/10.2478/amtsb-2020-0002.

Full text
Abstract:
AbstractTo validate PSS-14 Romanian version and identify reliable and simple tools which can be used for measuring stress level in current practice. Materials and methods: PSS-14 Romanian version, a five-level qualitative scale and a decimal scale were applied to 928 Romanian subjects, selected through the “snowball method”, for measuring perceived stress level. Intraclass correlations and Alpha Cronbach coefficient were used for assessing internal consistency of PSS-14 and Spearman coefficient for testing correlations.Results: Cronbach’s Alpha values for PSS-14 items were ≥0.700 (0.746 and 0.878 for standardized coefficient), showing internal consistency. Spearman correlation (0.375, p<0.05) revealed positive, medium and significant correlations between simple scales scores and PSS-14 scores.Conclusions: PSS-14 RO is an adequate tool for measuring the perceived stress level in Romanian patients. When appropriate, a simple Likert qualitative scale or a decimal self-assessment scale can quickly provide to health professionals results with indicative value.
APA, Harvard, Vancouver, ISO, and other styles
7

Bernard, Christophe. "Open Source Tools and Methods." eneuro 6, no. 5 (September 2019): ENEURO.0342–19.2019. http://dx.doi.org/10.1523/eneuro.0342-19.2019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bernard, A. "Virtual engineering: Methods and tools." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219, no. 5 (May 1, 2005): 413–21. http://dx.doi.org/10.1243/095440505x32238.

Full text
Abstract:
This paper presents an overview of actual approaches in virtual engineering, mainly from the design point of view. The evolution of the market has necessitated the reduction of time-to-market, essentially because the product life cycle is shorter, but also because it is very important to proceed more rapidly from an initial conception to a mass production object. As a result of newly evolved software DOI: environments, knowledge-based systems, and product data management, processes for integrated design and manufacturing for new products have emerged. Owing to this evolution of virtual engineering technologies, it has become possible today to validate parts representative of mass production within a very short time. This paper provides an overview of the actual methods and tools in all the components that affect the speed and efficiency of product development, in particular all the possibilities available to the designer, from the earliest stages of a product's life cycle.
APA, Harvard, Vancouver, ISO, and other styles
9

Yampol’skii, D. Z., and V. S. Vanaev. "Test Methods for Power Tools." Russian Engineering Research 38, no. 10 (October 2018): 761–68. http://dx.doi.org/10.3103/s1068798x18100180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Alfaro, Luis, and Ma José Roca. "Portable telepathology: methods and tools." Diagnostic Pathology 3, Suppl 1 (2008): S19. http://dx.doi.org/10.1186/1746-1596-3-s1-s19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "3Ddigital methods and tools"

1

Nicholas, Paul, and not supplied. "Approaches to Interdependency: early design exploration across architectural and engineering domains." RMIT University. Architecture and Design, 2008. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20081204.151243.

Full text
Abstract:
While 3D digital design tools have extended the reach of architectural and engineering designers within their own domains, restrictions on the use of the tools and an approach to practice whereby the architect designs (synthesises) and the engineer solves (analyses) - in that order ¡V have limited the opportunities for interdependent modes of interaction between the two disciplines during the early design phase. While it is suggested that 3D digital design tools can facilitate a more integrated approach to design exploration, this idea remains largely untested in practice. The central proposition of my research is that that 3D digital tools can enable interdependencies between crucial aspects of architectural and engineering design exploration during the early design phase which, before the entry of the computer, were otherwise impossible to affect. I define interdependency as a productive form of practice enabled by mutual and lateral dependence. Interdependent parties use problem solving processes that meet not only their own respective goals, but also those of others, by constructively engaging difference across their boundaries to actively search for solutions that go beyond the limits of singular domains. Developed through practice-based project work undertaken during my 3 year postgraduate internship within the Melbourne Australia office of the engineering firm Arup, my research explores new and improved linkages between early design exploration, analysis and making. The principal contribution of my research is to explore this problem from within the context, conditi ons and pressures of live practice. To test the research proposition this dissertation engages firstly with available literature from the fields of organisation theory and design, secondly with information gathered from experts in the field principally via interview, and lastly with processes of testing through practice-based (as opposed to university-based) project work. The dissertation is organized as follows: The Introductory Chapter outlines the central hypothesis, the current state of the discourse, and my motivations for conducting this research. I summarise the structure of my research, and the opportunities and limitations that have framed its ambitions. Chapter Two, Approach to Research and Method, details the constraints and possibilities of the Embedded Research within Architectural Practice context, within which this work has been undertaken, and describes the Melbourne office of Arup, the practice with whom I have been embedded. These contexts have led to the selection of a particular set of ethnographic research instruments, being the use of semi-structured interviews and the undertaking of practice-based studies as a participant-observer. These modes of testing are explained, and the constraints, limitations and requirements associated with them described. Within Chapter Three, Factors for Separation and Integration in Architectural and Engineering Design, I examine selected design literature to detail several factors impacting upon the historic and contemporary relationship between architects and engineers, and to introduce the problem towards which this thesis is addressed. I describe a process of specialisation that has led architects and engineers to see different aspects of a common problem, detail the historical factors for separation, the current relationship between domains and the emerging idea of increased integration during the early design phase. The aim of this section is primarily contextual - to introduce the characters and to understand why their interaction can be difficult - and investigation occurs through the concepts of specialisation and disciplinary roles. Chapter Four, Unravelling Interdependency, establishes an understanding of interdependency through the concept of collaboration. While I differentiate interdependency from collaboration because of the inconsistent manner in which the latter term is employed, the concept of collaboration is useful to initialise my understanding of interdependency because it, as opposed to the closely linked processes of cooperation and coordination, is recognised as being characterised by interdependency, and in fact is a viewed as a response specific to wider conditions of interdependency. From the literature, I identify four sites of intersection crucial to an understanding of interdependency; these are differing perceptions, shared and creative problem solving, communication and trust. These themes, which correlate with my practice experience at Arup Melbourne, are developed to introduce the concepts and vocabulary underlying my research. Chapter Five, Intersections & Interdependency between Architects and Engineers, grounds these four sites of intersection within contemporary issues of digital architectural and engineering practice. Each site is developed firstly through reference to design literature and secondly through the experiences and understandings of senior Arup practitioners as captured through my interviews. The views and experiences of these practitioners are used to locate digital limits to, and potential solutions for, interdependent design exploration between architects and engineers as they are experienced within and by practice. Through this combination of design literature and grounded experience, I extend: * the understanding of differing perceptions through reference to problems associated with digital information transfer. * the understanding of joint and creative problem solving by connecting it to the notion of performance-based design. * the understanding of communication by focussing it upon the idea of back propagating design information. * the understanding of trust by connecting it to the management and reduction of perceived complexity and risk. Chapter Six, Testing through Projects, details the project studies undertaken within this research. These studies are grouped into three discourses, characterized as Design(Arch)Design(Eng), Design|Analysis and Design|Making. As suggested by the concurrency operator that separates the two terms that constitute each of the three labels, each discourse tests how architectural and engineering explorations might execute in parallel. The section Design(Arch)|Design(Eng) reports projects that use a common language of geometry to link architectural and engineering design ideas through geometric interpretation. The section Design|Analysis reports projects in which analytical tools have been used generatively to actively guide and synthesise design exploration. The final section, Design|Making, reports projects in which the architectural and engineering design processes are synthesised around the procurement of fabrication information. Conclusions are then drawn and discussed in Chapter Seven. In evaluating the research I discuss how 3D digital design tools have enabled alternative approaches that resolve issues associated with differing perceptions, establishing common meanings, communication and trust. I summarise how these approaches have enabled increased interdependency in architect engineer interaction. Lastly, I draw together the impacts of intersecting 3D digital aspects of architectural and engineering design exploration during the early design phase, and indicate those aspects that require further analysis and research.
APA, Harvard, Vancouver, ISO, and other styles
2

Hellstadius, Monica. "Implementation of methods and tools." Thesis, KTH, Tillämpad maskinteknik (KTH Södertälje), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-124255.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

McParland, Patrick J. "Software tools to support formal methods." Thesis, Queen's University Belfast, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292757.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ivanova, Ivelina. "Supply chain management tools and methods." Thesis, University of Huddersfield, 2004. http://eprints.hud.ac.uk/id/eprint/4591/.

Full text
Abstract:
In today's business environment, manufacturers need to manage their enterprises as an inseparable part of a supply chain. Key to achieving this is the creation of an extended and integrated information system. In an attempt to find out what needs to be done to improve current supply chain methods and tools, the current research project 1) reviewed the literature to establish current approaches to Supply Chain Management (SCM); 2) identified what tools and methods are available; 3) categorised the current approaches to supply chain management and established a current practice SCM model; 4) identified the requirements for improved SCM; 5) produced an outline requirements specification for improved SCM. The research has made a number of contributions to knowledge. A literature survey on the subject of what SCM involves and what a SCM system is was carried out and was followed by the conclusions that existing software systems have not been classified and tested against the criteria of a true SCM system. A survey of existing SCM software solutions provided data for an analysis of what typical SCM applications include and concluded that a comprehensive SCM solution currently does not exist. That conclusion was verified by a survey based on SCM expert interviews. Three case studies were carried out that looked into different parts of the supply chain and demonstrated the significance of advanced SCM functionality for each one of them. The case studies also involved the design and implementation of a supply chain mapping tool and a supplier relationship management tool. Finally, a conceptual specification of an improved SCM system was developed. The research will be of interest to practitioners in the area of SCM that are looking for ideas to improve SCM procedures and namely, are looking into implementing or developing an already existing software system for SCM. It also suggests ideas for further research, which may be of interest to research students who are interested in the area of SCM.
APA, Harvard, Vancouver, ISO, and other styles
5

Marchesan, Almeida Gabriel. "Adaptive mpsoc architectures : principLes, methods and tools." Thesis, Montpellier 2, 2011. http://www.theses.fr/2011MON20154/document.

Full text
Abstract:
Les systèmes multiprocesseurs sur puce (MPSoC) offrent des performances supérieures tout en conservant la flexibilité et la réutilisabilité grâce à la customisation du logiciel embarqué. Alors que la plupart de MPSoC sont aujourd'hui hétérogènes pour mieux répondre aux besoins des applications ciblées, les MPSoCs homogènes pourraient devenir dans un proche avenir une alternative viable apportant d'autres avantages tels que l'équilibrage de charge de l'exécution, la migration des tâches et l'ájustement de fréquence dynamique. Cette thèse s'appuie sur une plateforme MPSoC homogène, développée pour explorer techniques d'adaptation en ligne. Chaque processeur de ce système est compact et exécute un système d'exploitation préemptif qui surveille diverses métriques et est habilité à prendre des décisions de remapping grâce à des techniques de migration de code et du changement dynamique de la fréquence. Cette approche permet la mise en œuvre des capacités de raffinage d'application à l'exécution en fonction de différents critères
Multiprocessor Systems-on-Chip (MPSoC) offer superior performance while maintaining flexibility and reusability thanks to software oriented personalization. While most MPSoCs are today heterogeneous for better meeting the targeted application requirements, homogeneous MPSoCs may become in a near future a viable alternative bringing other benefits such as run-time load balancing, task migration and dynamic frequency scaling. This thesis relies on a homogeneous NoC-based MPSoC platform developed for exploring scalable and adaptive on-line continuous mapping techniques. Each processor of this system is compact and runs a tiny preemptive operating system that monitors various metrics and is entitled to take remapping decisions through code migration techniques and dynamic frequency scaling. This approach that endows the architecture with decisional capabilities permits refining application implementation at run-time according to various criteria
APA, Harvard, Vancouver, ISO, and other styles
6

Davidson, Gordon Westly. "Aircraft NLG shimmy : methods, tools and analysis." Thesis, Imperial College London, 2012. http://hdl.handle.net/10044/1/10554.

Full text
Abstract:
ELGEAR was a UK government/industry partnership created in 2006 to research electrical technology in aircraft landing gear systems. The project designed, built and ground tested electrical technology for a Landing Gear Extension/Retraction system (LGERS) and Nose Wheel Steering systems (NWS) for a 120 passenger aircraft. One thread of this research, and the topic of the present thesis, was to develop analysis methods and tools to investigate the effects of shimmy. Shimmy is the self excited vibration of a castored wheel assembly. It may be experienced on assemblies such as wheel chairs, shopping trolleys, motor cycles, and it is particularly prevalent on aircraft landing gears. Developed within this report is a generic set of system shimmy requirements to guide future engineers. Several models are developed from first principles, allowing a potential design to be quickly evaluated and damper sizes determined. A detailed Multi-Body Systems model has been created using the software modelling package ADAMS. The model includes a detailed representation of mass and inertia properties, stiffness’s, friction and tyre properties. The report includes a detailed method to determine the tyre parameters compatible with the ADAMS PAC2002 formulation (magic tyre formula). The dynamic model is simulated to investigate the landing gear’s behaviour to each requirement and is a significant enhancement to the models developed using first principles. To explore the influence of higher frequency tyre dynamics, a model incorporating a simplified SWIFT tyre model is generated from first principles. The report concludes with a validation of the methods and tools. Test results are used to validate several aspects of the tyre model, and a comparison between hand derived models and the detailed model provides a thorough check of modelling practices.
APA, Harvard, Vancouver, ISO, and other styles
7

Carrasco, Carrillo Tomás. "Methods and tools for the design of RFICs." Doctoral thesis, Universitat de Barcelona, 2013. http://hdl.handle.net/10803/131009.

Full text
Abstract:
Ambient intelligence is going to focus the next advances in wireless technologies. Hence, the increasing demand on radio frequency (RF) devices and applications represents, not only a challenge for technological industries to improve its roadmaps, but also for RF engineers to design more robust, low-power, small-size and low-cost devices. Regarding to communication robustness, in the latest years, differential topologies have acquired an important relevance because of its natural noise and interference immunity. Within this framework, a differential n-port device can still be treated with the classical analysis circuit theory by means of Z-,Y-, h-parameters or the most suitable S-parameters in the radio frequency field. Despite of it, Bockelman introduced the mixed-mode scattering parameters, which more properly express the differential and common-mode behavior of symmetrical devices. Since then, such parameters have been used with a varying degree of success, as it will be shown, mainly because of a misinterpretation. Thereby, this thesis is devoted to extend the theory of mixed-mode scattering parameters and proposes the methodology to analyze such devices. For this proposal, the simplest case of a two-port device is developed. By solving this simple case, most of the lacks of the current theory are filled up. As instance, it allows the characterization and comparison of symmetric and spiral inductors, which have remained a controversy point until now. After solving this case, the theory is extended to a n-port device. Another key point on the fast and inexpensive development of radio frequency devices is the advance on fast CAD tools for the analysis and synthesis of passive devices. In the case of silicon technologies, planar inductors have become the most popular shapes because of its integrability. However, the design of inductors entails a deep experience and acknowledge not only on the behavior of such devices but on the use of electromagnetic (EM) simulators. Unfortunately, the use of EM simulators consumes an important quantity of time and resources. Thereby, this thesis is devoted to improve some of the aspects that slow down the synthesis process of inductors. Therefore, an ‘ab initio’ technique for the meshing of planar radio frequency and microwave circuits is described. The technique presented can evaluate the losses in the component with a high accuracy just in few seconds where an electromagnetic simulator would normally last hours. Likewise, a simple bisection algorithm for the synthesis of compact planar inductors is presented. It is based on a set of heuristic rules obtained from the study of the electromagnetic behavior of these planar devices. Additionally, design of a single-ended to differential low noise amplifier (LNA) in a CMOS technology is performed by using the methods and tools described.
L'enginyeria de radiofreqüència i la tecnologia de microones han assolit un desenvolupament inimaginable i avui en dia formen part de la majoria de les nostres activitats diàries. Probablement, la tecnologia mòbil ha tingut un desenvolupament més ràpid que qualsevol altre avenç tecnològic de l'era digital. Avui en dia, podem dir que el paradigma de la mobilitat s'ha assolit i tenim accés ràpid a internet des de qualsevol lloc on podem estar amb un dispositiu de butxaca. No obstant això, encara hi ha fites per endavant. Es més que probable que el paradigma de l’ "ambient intelligence” sigui el centre dels pròxims avenços en les tecnologies sense fils. A diferencia del paradigma de l"ambient intelligence', l'evolució de la tecnologia de la informació mai ha tingut l'objectiu explícit de canviar la societat, sinó que ho van fer com un efecte secundari, en canvi, les visions d' “ambient intelligence” proposen expressament el transformar la societat mitjançant la connexió completa i la seva informatització. Per tant, l'augment de la demanda de dispositius de ràdio freqüència (RF) i de les seves possibles aplicacions representa, no només un repte per a les indústries tecnològiques per millorar els seus plans de treball, sinó també per als enginyers de RF que hauran de dissenyar dispositius de baixa potència, més robusts, de mida petita i de baix cost. Quant a la robustesa dels dispositius, en els últims anys, les topologies de tipus diferencial han adquirit una important rellevància per la seva immunitat natural al soroll i resistència a les interferències. Dins d'aquest marc, un dispositiu de nports diferencial, encara pot ser tractat com un dispositiu 2nx2n i la teoria clàssica d'anàlisi de circuits (és a dir, la temia de quadripols) es pot aplicar a través de paràmetres Z, Y, h o els paràmetres S, més adequats en el camp de freqüència de ràdio. Tot i això, Bockelman i Eisenstadt introdueixen els paràmetres S mixtos, que expressen més adequadament el comportament diferencial i en mode comú de dispositius simètrics o asimètrics. Des de llavors, aquests paràmetres s'han utilitzat amb un grau variable d'èxit, com es mostrarà, principalment a causa d'una mala interpretació. D'aquesta manera, la primera part d'aquesta tesi està dedicada a estendre la teoria dels paràmetres S de mode mixt i proposa la metodologia d'anàlisi d'aquest tipus de dispositius i circuits. D'aquesta forma, en el Capítol 2, es desenvolupa el cas més simple d'un dispositiu de dos ports. En resoldre aquest cas simple, la major part de les mancances de la teoria actual es posen de relleu. Com a exemple, pennet la caracterització i la comparació de bobines simètriques i espiral no simètriques, que han estat un punt de controvèrsia fins ara. Després de resoldre aquest cas, al Capítol 3 s'estén la teOIia a un dispositiu de n-ports dels quals un nombre pot ser single-ended i la resta diferencials. És en aquest moment quan la dualitat existent entre els paràmetres S estàndard i de mode mixt es pot veure clarament i es destaca en el seu conjunt. Aquesta teoria permet, tanmateix, estendre la teoria clàssica d'amplificadors quan s'analitzen per mitjà de paràmetres S. Un altre punt clau en el desenvolupament ràpid i de baix cost dels dispositius de radiofreqüència és l'avenç en les eines CAD ràpides per a l'anàlisi i síntesi dels dispositius passius, en especial dels inductors. Aquests dispositius apareixen tot sovint en el disseny de radio freqüència degut a la seva gran versatilitat. Tot i que hi ha hagut múltiples intents de reemplaçar amb components externs o circuits, fins i tot actius, en el cas de les tecnologies de silici, els inductors planars s'han convertit en les formes més populars per la seva integrabilitat. No obstant això, el disseny d'inductors implica conèixer i posseir una experiència profunda no només en el comportament d'aquests dispositius, però també en l'ús de simuladors electromagnètics (EM). Desafortunadament, l'ús dels simuladors EM consumeix una quantitat important de temps i recursos. Per tant, la síntesi dels inductors representa un important inconvenient actualment. D'aquesta manera, la segona part d'aquesta tesi està dedicada a millorar alguns dels aspectes que frenen el procés de síntesi dels inductors. Per tant, en el Capítol 4, es descriu una tècnica 'ab initio' de generació de la malla per bobines planars en ràdio freqüència i microones. La tècnica es basa en l'estudi analític dels fenòmens d'aglomeració de corrent que tenen lloc a l'interior del component. En aquesta avaluació, no es requereix una solució explícita dels corrents i de les càrregues arreu del circuit. Llavors, el nombre de cel•les de la malla assignades a una tira de metall donada, depèn del valor inicialment obtingut a partir de l'estudi analític. La tècnica presentada pot avaluar les pèrdues en el component amb una gran precisió només en uns pocs segons, quan comparat amb un simulador electromagnètic normalment es necessitaria hores. De la mateixa manera, en el Capítol 5 es presenta un senzill algoritme de bisecció per a la síntesi d'inductors planars compactes. Es basa en un conjunt de regles heurístiques obtingut a partir de l'estudi del comportament electromagnètic d'aquests dispositius planars. D'aquesta manera, el nombre d'iteracions es manté moderadament baix.D'altra banda, per tal d'accelerar l'anàlisi en cada pas, s'utilitza un simulador ràpid electromagnètic planar, el qual es basa en el coneixement que es té del component sintetitzat. Finalment, en el Capítol 6, la metodologia de paràmetres S de mode mixt proposada i les eines CAD introduides s'utilitzen àmpliament en el disseny d'un amplificador de baix soroll “single-ended” a diferencial (LNA), mitjançant una tecnologia estàndard CMOS.L'amplificador de baix soroll és un dels components claus en un sistema de recepció de radio freqüència, ja que tendeix a dominar la sensibilitat i la figura de soroll (NF) de tot el sistema. D'altra banda, les característiques d'aquest circuit estan directament relacionades amb els components actius i passius disponibles en una tecnologia donada. Per tant, la tecnologia escollida, el factor de qualitat dels passius, i la forma com es caracteritzen tindran un alt impacte en les principals figures de mèrit del circuit real.
APA, Harvard, Vancouver, ISO, and other styles
8

Bylund, Nicklas. "Models methods and tools for car body development /." Luleå, 2002. http://epubl.luth.se/1402-1757/2002/15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Woksepp, Stefan. "Virtual reality in construction : tools, methods and processes." Doctoral thesis, Luleå : Division of Structural Engineering, Department of Civil, Mining and Environmental Engineering, Luleå University of Technology, 2007. http://epubl.ltu.se/1402-1544/2007/49/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pillac, Victor. "Dynamic vehicle routing : solution methods and computational tools." Phd thesis, Ecole des Mines de Nantes, 2012. http://tel.archives-ouvertes.fr/tel-00742706.

Full text
Abstract:
Within the wide scope of logistics management,transportation plays a central role and is a crucialactivity in both production and service industry.Among others, it allows for the timely distributionof goods and services between suppliers, productionunits, warehouses, retailers, and final customers.More specifically, Vehicle Routing Problems(VRPs) deal with the design of a set of minimal costroutes that serve the demand for goods orservices of a set of geographically spread customers,satisfying a group of operational constraints.While it was traditionally a static problem, recenttechnological advances provide organizations withthe right tools to manage their vehicle fleet in realtime. Nonetheless, these new technologies alsointroduce more complexity in fleet managementtasks, unveiling the need for decision support systemsdedicated to dynamic vehicle routing. In thiscontext, the contributions of this Ph.D. thesis arethreefold : (i) it presents a comprehensive reviewof the literature on dynamic vehicle routing ; (ii)it introduces flexible optimization frameworks thatcan cope with a wide variety of dynamic vehiclerouting problems ; (iii) it defines a new vehicle routingproblem with numerous applications.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "3Ddigital methods and tools"

1

Spurr, Kathy. CASE: Methods and tools. New York: Prentice Hall, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Directorate, Canadian Workplace Automation Research Centre Organizational Research. Productivity measurement methods and tools. Laval, Quebec: Canadian Workplace Automation Research Centre, Supply and Services Canada, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hogg, S. [Presentation methods, tools and environments]. [S.l.]: [The author], 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

UNIX Programming: Methods and Tools. San Diego: Harcourt Brace Jovanovich, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

1944-, Bracchi G., and Tsichritzis Dionysios C, eds. Office systems: Methods and tools. Amsterdam: North-Holland, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mazzara, Manuel, Jean-Michel Bruel, Bertrand Meyer, and Alexander Petrenko, eds. Software Technology: Methods and Tools. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-29852-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Systems engineering tools and methods. Boca Raton: CRC Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Font technology: Methods and tools. Berlin: Springer-Verlag, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Selvin, S. Statistical tools for epidemiologic research. Oxford: Oxford University Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Statistical tools for epidemiologic research. Oxford: Oxford University Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "3Ddigital methods and tools"

1

Tönshoff, Nils. "Solution Methods." In Modular Machine Tools, 95–111. Wiesbaden: Deutscher Universitätsverlag, 1997. http://dx.doi.org/10.1007/978-3-663-08773-1_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Challis, John H. "Experimental Tools." In Experimental Methods in Biomechanics, 9–22. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52256-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kopanos, Georgios M., and Luis Puigjaner. "Methods and Tools." In Solving Large-Scale Production Scheduling and Planning in the Process Industries, 57–70. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01183-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Köhne, Matthias. "Tools and Methods." In Lp-Theory for Incompressible Newtonian Flows, 67–100. Wiesbaden: Springer Fachmedien Wiesbaden, 2013. http://dx.doi.org/10.1007/978-3-658-01052-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schmidt, Elisabeth. "Tools and Methods." In Gestaltung hybrider Mensch-Maschine-Systeme/Designing Hybrid Societies, 39–55. Wiesbaden: Springer Fachmedien Wiesbaden, 2019. http://dx.doi.org/10.1007/978-3-658-28158-8_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lull, Dave. "Design Tools, Methods." In Discussions in User Experience, 57–71. Berkeley, CA: Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3267-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Löffler, J., U. Steinhardt, M. Volk, and U. Walz. "Investigation methods / tools." In Development and Perspectives of Landscape Ecology, 257–306. Dordrecht: Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-017-1237-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jensen, Jørgen, Carlos Guedes Soares, and Apostolos Papanikolaou. "Methods and Tools." In Risk-Based Ship Design, 195–301. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89042-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Galis, Alex. "Methods and tools." In Lecture Notes in Computer Science, 391–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/bfb0013430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hofbauer, Wolfgang Karl, and Georg Gärtner. "Tools and Methods." In Microbial life on Façades, 7–27. Berlin, Heidelberg: Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-54833-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "3Ddigital methods and tools"

1

Green, Lawrence, Natalia Alexandrov, Sherilyn Brown, Jeffrey Cerro, Clyde Gumbert, Michael Sorokach, and Cécile Burg. "Decision Support Methods and Tools." In 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-7028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Patel, S., R. A. Orr, M. T. Norris, and D. W. Bustard. "Tools to support formal methods." In the 11th international conference. New York, New York, USA: ACM Press, 1989. http://dx.doi.org/10.1145/74587.74604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Session details: Tools & Methods." In the Twenty-Fourth International Conference, Chair Adrian Sampson. New York, New York, USA: ACM Press, 2019. http://dx.doi.org/10.1145/3297858.3324118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

El Amine Tali, Mohammed, Fahima Nader, and Rachid Chalal. "Decision modelling: Methods and tools." In 2017 International Conference on Mathematics and Information Technology (ICMIT). IEEE, 2017. http://dx.doi.org/10.1109/mathit.2017.8259701.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sampson, Adrian. "Session details: Tools & Methods." In ASPLOS '19: Architectural Support for Programming Languages and Operating Systems. New York, NY, USA: ACM, 2019. http://dx.doi.org/10.1145/3324118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Anderson, Jason. "Session details: Tools and methods." In FPGA'14: The 2014 ACM/SIGDA International Symposium on Field-Programmable Gate Arrays. New York, NY, USA: ACM, 2014. http://dx.doi.org/10.1145/3260938.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Coad, Peter. "Methods and CASE tools---Peter's cartoons." In Addendum to the proceedings. New York, New York, USA: ACM Press, 1992. http://dx.doi.org/10.1145/157709.157719.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mertens, Martin. "Advanced Protocol Testing Methods and Tools." In SpaceOps 2002 Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2002. http://dx.doi.org/10.2514/6.2002-t1-31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Abdelnur, H., V. Cridlig, R. State, and O. Festor. "VoIP security assessment: methods and tools." In The 1st IEEE Workshop on VoIP Management and Security-VoIP MaSe'06. IEEE, 2006. http://dx.doi.org/10.1109/voipms.2006.1638119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Snider, Mark, Sudhakar Teegavarapu, D. Scott Hesser, and Joshua D. Summers. "Augmenting Tools for Reverse Engineering Methods." In ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99676.

Full text
Abstract:
Reverse engineering has gained importance over the past few years due to an intense competitive market aiding in the survivability of a company. This paper examines the reverse engineering process and what, how, and why it can assist in making a better design. Two well known reverse engineering methodologies are explored, the first by Otto and Wood and the second by Ingle. Each methodology is compared and contrasted according to the protocols and tools used. Among some of the reverse engineering tools detailed and illustrated are: Black box, Fishbone, Function Structure, Bill of Material, Exploded CAD models, Morphological Matrix, Subtract and Operate Procedure (SOP), House of Quality matrix, and FMEA. Even though both methodologies have highly valued tools, some of the areas in reverse engineering need additional robust tooling. This paper presents new and expanded tooling to augment the existing methods in hopes of furthering the understanding of the product, and process. Tools like Reverse Failure Mode and Effects Analysis (RFMEA), Connectivity graphs, and inter-relation matrix increase the design efficiency, quality, and the understanding of the reverse engineering process. These tools have been employed in two industry projects and one demonstrative purpose for a Design for Manufacture Class. In both of these scenarios, industry and academic, the users found that the augmented tools were useful in capturing and revealing information not previously realized.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "3Ddigital methods and tools"

1

Tilger, Christopher Frank, and Michael John Murphy. Subtask 1.2 Advanced Methods – ExPIV Tools. Office of Scientific and Technical Information (OSTI), April 2019. http://dx.doi.org/10.2172/1511203.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

McMordie, K. L., E. E. Richman, J. M. Keller, and D. R. Dixon. Energy efficiency assessment methods and tools evaluation. Office of Scientific and Technical Information (OSTI), August 1994. http://dx.doi.org/10.2172/10173953.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Shatz, Sol M. Methods and Tools to Support Software Engineering Automation. Fort Belvoir, VA: Defense Technical Information Center, March 2001. http://dx.doi.org/10.21236/ada392761.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Army Engineer Research & Development Center. Methods, Tools, and Data for Coastal System Resilience Assessments. Fort Belvoir, VA: Defense Technical Information Center, October 2015. http://dx.doi.org/10.21236/ad1001636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sauser, Brian, and Martin Sarfaraz. System Maturity and Architecture Assessment Methods, Processes, and Tools. Fort Belvoir, VA: Defense Technical Information Center, March 2012. http://dx.doi.org/10.21236/ada582064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fountain, Matthew S., Robert T. Brigantic, and Reid A. Peterson. Statistical Methods and Tools for Hanford Staged Feed Tank Sampling. Office of Scientific and Technical Information (OSTI), October 2013. http://dx.doi.org/10.2172/1113604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lundgren, Marja, and Johan Dahlberg, eds. Approaches, Methods and Tools for Solar Energy in Urban Planning. IEA SHC Task 51, August 2018. http://dx.doi.org/10.18777/ieashc-task51-2018-0004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

E. R. Jessup. Methods, Software and Tools for Three Numerical Applications. Final report. Office of Scientific and Technical Information (OSTI), March 2000. http://dx.doi.org/10.2172/755836.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kibira, Deogratias, Katherine C. Morris, and Senthilkumaran Kumaraguru. Methods and Tools for Performance Assurance of Smart Manufacturing Systems. National Institute of Standards and Technology, December 2015. http://dx.doi.org/10.6028/nist.ir.8099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Heitmeyer, Connie. The Role of HCI in CASE Tools Supporting Formal Methods. Fort Belvoir, VA: Defense Technical Information Center, January 1994. http://dx.doi.org/10.21236/ada465116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic '3Ddigital methods and tools' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography