Relevant bibliographies by topics / 3D FDM tisk / Dissertations / Theses
To see the other types of publications on this topic, follow the link: 3D FDM tisk.

Dissertations / Theses on the topic '3D FDM tisk'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 35 dissertations / theses for your research on the topic '3D FDM tisk.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Műller, Jakub. "Kompozitní tisk pro 3D FDM tiskárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382278.

Full text
Abstract:
This diploma thesis deals with the study of 3D printing based on the FDM method. This method focuses on the possibility of using two extruders it means that the composite parts can be printed. This diploma thesis describes the available variants of composite printing currently on the market. Based on the gained knowledge and the availability of 3D printers and software, individual variants of composite parts were printed. A tensile test was performed on these samples to determine the strength characteristics. Additionally, compatibility and adhesion of two selected materials were tested. Based on the testing is made an evaluation of the achieved results, effectiveness and feasibility.
APA, Harvard, Vancouver, ISO, and other styles
2

Hrdlička, Martin. "Vliv teploty vzduchu na FDM 3D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318133.

Full text
Abstract:
The thesis deals with 3D printing by the FDM and ambient temperature on print quality. The thesis describes the principle of printing by the FDM method and the occurrence of errors caused by the influence of ambient temperature. The aim of the thesis is to design a heated chamber for RepRap Prusa i3 printer, its construction and subsequent testing of ambient temperature influence on print quality. To test the occurrence of the described errors, specific tests and materials are selected in the work. The result of this work is the recommended ambient temperature in the heated chamber for improved FDM printing.
APA, Harvard, Vancouver, ISO, and other styles
3

Rafaja, Hynek. "Monitorování procesu FDM tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399310.

Full text
Abstract:
The target of this work is the development of a monitoring system for 3D printing by the Fused Deposition Modeling method, which will be able to identify printing error conditions. During the solving process the needed error conditions were identified. Then, an algorithm was programmed to identify the error condition using the criterion. The resulting Monitoring Hardware was implemented in the printer and experimentally verified. A system has been developed that can identify error conditions with an accuracy of 94.7%. The main benefit of this work is the automatic identification of error conditions that stop printing if necessary. This leads to a reduction in scrap and cost savings. In the future, the software could automatically adjust the print parameters when identifying an error condition. This would prevent or completely eliminate the error condition without user intervention.
APA, Harvard, Vancouver, ISO, and other styles
4

Kratochvíl, Tomáš. "3D FDM tiskárna reprap a parametry tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232069.

Full text
Abstract:
This master thesis summarizes the current knowledge about non-commercial 3D printing FDM technology. The goal of this thesis is to demonstrate the gained knowledge by building a 3D printer which can partially replicate itself, and to evaluate its technological parameters. The experimental part of this work is focused on the impact of the changes in technological parameters of printing on mechanical properties of printed parts.
APA, Harvard, Vancouver, ISO, and other styles
5

Břoušek, Lukáš. "Tepelné úpravy povrchu po 3D FDM tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318156.

Full text
Abstract:
The topic of diploma thesis are surface heat treatments after 3D print by method Fused Deposition Modeling. In the introduction is located recherche of the given issue. Further, we describe the construction and process of the 3D printer construction, on which will be printed samples for experiments in the next part of the thesis. The aim is to determine the behavior and changes of surface structures of heat-affected samples from different materials. Furthermore, the suitability of the used methods and the possibility of their use in practice.
APA, Harvard, Vancouver, ISO, and other styles
6

Zítka, Lukáš. "Inovace 3D tiskárny typu Rep Rap." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319860.

Full text
Abstract:
The present Master thesis is focused on innovation and verification of the functionality of a 3D RepRap. The theoretical part of the thesis characterizes individual additive technologies. The practical part is focused on the design of the technical modifications of the printer in order to achieve the quality of the printing, while the current 3D printer design is compared with the innovative solution. The practical part tests the setting of print parameters, various materials for 3D printing and necessary finishing operations. The thesis is completed
APA, Harvard, Vancouver, ISO, and other styles
7

Bouchal, Petr. "Vývoj 3D FDM tiskárny implementace na trh." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241863.

Full text
Abstract:
The result of this thesis is to create an overview of available 3D printing technologies, design a 3D FDM printer, create an instructional manual on the assembling and create a business model of a 3D printing company.
APA, Harvard, Vancouver, ISO, and other styles
8

Prouza, Tomáš. "Návrh duální tiskové hlavy pro FDM 3D tiskárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-242851.

Full text
Abstract:
This master thesis is focused on a research in the field of 3D printing technology. During the research a particular technology, being regularly applied by the RepRap printers, is described. Mentioned technology is tested on a Rebel II printer model. The findings are applied to the dual 3D extruder design project. This dual 3D extruder is designed and made in two basic options, where the first option discovers the shortcomings and the second option is modified and tested. In the following step, assessment of applicability, functionality, as well as economic analysis of production of this dual 3D extruder is made.
APA, Harvard, Vancouver, ISO, and other styles
9

Čuma, Zdeněk. "3D FDM tiskárna s výměnnou tiskovou hlavou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444263.

Full text
Abstract:
The aim of the work is to design and manufacture a mechanism for setting up and clamping the replaceable head of a 3D FDM printer. The first part of the thesis deals with 3D printing in general, the second part describes the FDM method. Part three is devoted to the selection and construction of a suitable 3D printer, the fourth part to the actual design of the head attachment. In the fifth part, a technical and economic evaluation is carried out.
APA, Harvard, Vancouver, ISO, and other styles
10

Butakov, Aleksandr. "Návrh úpravy rámu 3D FDM delta tiskárny pro zvýšení kvality tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417414.

Full text
Abstract:
This work is focused on solving the problems of delta 3d printer frame rigidity and impact of rigidity on final quality of 3d printing. A variant of a 3d printer on a classic Kossel-shaped frame has designed and built. Further, frame strength analysis and improvement design is performed, with subsequent production of a new variant and comparison of the 3d printing results of both variants. The result of this work is to show how the frame construction really affects the print quality.
APA, Harvard, Vancouver, ISO, and other styles
11

Šlimar, Filip. "Lepení FDM 3D tištěných dílů z PLA." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444278.

Full text
Abstract:
The thesis deals with the theory of 3D printing, materials for printing and bonding. It focuses on FDM printing and PLA material. It also compares gluing with other methods and deals with the distribution of adhesives, the gluing procedure and tests of glued joints. The work, based on literature studies, proposes an experiment to evaluate selected adhesives. The practical part contains a description, results and evaluation of the experiment. The evaluation of adhesives is based on tensile and shear strength.
APA, Harvard, Vancouver, ISO, and other styles
12

Janiš, Adam. "Mechanické vlastnosti materiálů pro 3D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442479.

Full text
Abstract:
This thesis focuses on the description of 3D printing technologies using the FDM method, which uses deposition of molten thermoplastics and their subsequent cooling and solidification layer by layer. This unique structure then shows a strong anisotropy of mechanical properties and, as a result, their testing and print settings are very important. Tensile testing of plastic materials, including indicators of mechanical properties, are described in this thesis according to ČSN EN ISO standard. The practical part presents the concept of a device capable of performing these tests. The block diagram indicates the functional elements and the connections among them. Tensile strength test is described together with results processing. Necessary product documentation is also included.
APA, Harvard, Vancouver, ISO, and other styles
13

Volfík, Jiří. "Návrh a výroba experimentálního dílu nápravy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232192.

Full text
Abstract:
The content of this diploma thesis is a design of construction and selection of suitable material for upper-carrier part used for racing vehicle, produced by FDM 3D printing with the alternative option to replace an existing part, which was produced by conventional technique of CNC machining. Various versions of the experimental part are analyzed by FEM and compared in terms of safety coefficient with target to select the most appropriate construction design. The chosen version of the model is at the end compared with already existing part, which was also analyzed by FEM.
APA, Harvard, Vancouver, ISO, and other styles
14

Halabrín, Marek. "Spojování 3D FDM tištěných dílů z ABS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444279.

Full text
Abstract:
The thesis focuses on comparisons of usability of distinct types of glues to attach specimens. The specimens were glued using 4 types of glue: BISON Power Adhesive, BISON Epoxy Universal, PATTEX Repair Epoxy 5 min and a mixture of acetone with diluted ABS plastic as the last. The specimens underwent tensile and impact tests. For the tensile test, the specimens were made in 3 variants: blunt frontal joint, bevelled joint and gradually folded joint. For the impact test, the specimens were made in the form of a rod with a V-shaped notch. All variants of the joints consisted of 5 specimens with 3 unglued specimens for reference. The testing was conducted on the ZD 10/90 tensile strength machine and a Charpy impact test machine from the WPM company. The thesis contains technical-economic evaluation of the results of the tests with comparisons of the individual glues and forms.
APA, Harvard, Vancouver, ISO, and other styles
15

Kutil, Jaroslav. "Vliv průměru trysky na kvalitu tisku 3D tiskárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241095.

Full text
Abstract:
The matter of this thesis is to find the influence of the diameter of the nozzle on the 3D printer´s print quality. The first part briefly characterizes the Rapid Prototyping technology and describes the RepRap project. The second part describes the construction of the experimental FMD 3D printer. The following section deals with technical printing parametres and their influence on the printed product. The experimental part of the thesis is focused on the impact of the discharge nozzle diameter on the mechanical properties, surface quality and shape accuracy of the final product and on the following recommendations of operational parametres.
APA, Harvard, Vancouver, ISO, and other styles
16

Čada, Jiří. "Povrchové změny v závislosti na parametrech FDM tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-240955.

Full text
Abstract:
This thesis deals with a construction of modified RepRap 3D printer Rebel II which operates with Fused Deposition Modeling technology and selection of suitable criterion for printing. It mainly focuses on the temperature of the material being printed and speed of printing for three selected materials. Materials were selected based on availability in the market and their application. An experiment, focusing on surface changes of products as well as on the look of a fibre after passing through a nozzle, was performed.
APA, Harvard, Vancouver, ISO, and other styles
17

Malovaný, Ondřej. "Využití 3D tisku v TZB." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392001.

Full text
Abstract:
In the experimental part of this thesis there is an assessment of pressure bearing capacity of cylindrical nozzles printed using a 3D printer. In the theoretical part of this diploma thesis there are outlined the types of additive technologies focusing on the development of FDM printers, open designs and RepRap project. Descripti-on of the production process of 3D printing and application of additive technolo-gies in the field of HVAC. In the project part, the design of the forced ventilation of the Sports Hall is solved. The object is assessed in terms of heat losses and profits for priority rooms of functional units. Heat load coverage is carried out by air-conditioning equipment. In addition, a project is drawn up which contains all the text and drawings, including technical specifications and regulatory schemes.
APA, Harvard, Vancouver, ISO, and other styles
18

Chaloupka, Matyáš. "Konstrukce 3D tiskárny pro tisk materiálu s příměsí karbonových vláken." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318141.

Full text
Abstract:
The presented thesis deals with FDM 3D printing method with emphasis on printing carbon fiber reinforced plastic (CFRP). The aim of this thesis is to engineer the FDM 3D printer designed for printing CFRP and to execute the experiment targeted on comparison of CFRP material properties against commonly used 3D printing plastics such as PLA, ABS, PET etc. The device designed in this work has printing area of 200 x 200 mm with maximum height of the object of 200 mm. The printing bed is heated and the whole device is enclosed. There are two kinds of experiments carried out within the thesis. The first one is focused on tensile strength and Young's modulus of selected materials, while the second experiment compares Charpy's impact strength of specimen with different infill percentage on two selected materials, PET and PET filled with chopped carbon fiber.
APA, Harvard, Vancouver, ISO, and other styles
19

Strnad, Jan. "Návrh vyhřívaného atypického stolu pro 3D tiskárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254453.

Full text
Abstract:
This diploma thesis deals with an atypical heated bed for FDM 3D printer. It presents the most commonly used ways of heating and the chosen variant of the heated beds are realized by powerful resistors. There are also discussed three ways of placement of resistors on the desktop motherboards that are modeled in Autodesk Inventor Professional 2016 and exported to Autodesk Fusion 360, where FEM calculations are made. Optimal alternative is made and tested. The test results are compared with the results of thermal simulations in Autodesk Fusion 360.
APA, Harvard, Vancouver, ISO, and other styles
20

Sladký, Martin. "Optimalizace konstrukce bezpilotního prostředku vyráběného technologií Fused Deposition Modelling (FDM)." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443181.

Full text
Abstract:
This master thesis deals with the design of the internal wing structure of 3D printed flying wing VUT 714. As a part of this work was performed a load calculation, static strenght test, comparative FEM analysis and subsequently topology optimization was performed. The outcome of this master thesis is a rational design of the wing internal structure based on the load calculation and knowledge of effect of this load on the structure.
APA, Harvard, Vancouver, ISO, and other styles
21

Koudela, Ondřej. "Návrh 3D tiskárny typu delta pi s temperovanou podložkou s využitím systémů CAE." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221074.

Full text
Abstract:
This master's thesis deals with 3D printing using non-commercial 3D RepRap type printers. This work briefly describes development trends of non-commercial RepRap printers, theory of FDM print with analysis and comparison of materials, which are used in printing and the issue of the finite volume method and theory of heat diffusion. The practical part based on simulations from SolidWorks Flow Simulation discussed two basic methods of heating hot bed, then the temperature profile of hot end and the heat flow in full assembly of the printer. Outcome of this work is design an optimized model and the physical assembly of 3D printer delta pi type.
APA, Harvard, Vancouver, ISO, and other styles
22

Menčík, Přemysl. "Hybridní biopolymerní kompozity pro 3D tiskové aplikace." Doctoral thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-402113.

Full text
Abstract:
This dissertation work deals with the thermic and the mechanical behavior of plasticized bio-plastics and bio-composites for the 3D printing applications. The influence of plasticizer chemical structure on thermic and mechanical properties of plasticized polymeric blends from the poly-3-hydroxybutyrate and the poly lactic acid was investigated. Used plasticizers are based on derivative of citric acid. The influence of plasticizers on polymeric matrix and their compatibility was estimated by gear torque rate of melt mixer, respectively rate of plasticizer migration from the material during higher temperature. The plasticizer structure influence on the glass transition temperature and on the kinetics of crystallization of plasticized material was investigated by modulated differential scanning calorimetry. The behavior of material during 3D printing was also observed. Mechanical properties of printed samples, especially their elongation at break, were determined by tensile tests. The largest softening effect was observed using tributylcitrate plasticizer, where the glass temperature decreased by 35 °C and elongation at break increased by 150% compared to non-plasticized reference material. This plasticized polymeric blend showed also sufficient 3D printing properties and was used as the matrix for composites in the next part of this work. Composites were filled by kaolin, limestone, halloysit, fumed silica, talc, magnesium hydroxide and chopped flax fibers. Particle distribution in composites in dependence of used surface treatment of filler was observed by scanning electron microscopy. The influence of composite filler on rheological properties, crystallization kinetics and thermal stability of composites, was observed by viscometry and differential scanning calorimetry. Their mechanical properties and heat deflection temperature were observed on samples prepared by 3D print. Kaolin in composite material showed homogeneous particle distribution and insignificant nucleation effect and influence on thermic stability. Composite filled by kaolin also showed 18% smaller warping during 3D printing compared to non-filled reference. Consequently kaolin was evaluated as suitable inorganic filler for bioplastic composite intended for 3D print and this composite was used in the following part of this thesis. Method of mathematical prediction of Young's modulus was described for composite samples prepared by 3D print. Composites filled by one type of filler – kaolin, or limestone, resp. by combination of both fillers were investigated on the basis of the micromechanic Halpin-Tsai model modified by the semiempiric multiparametric Cerny's equation. Additive and combinational method of Young's modulus evaluation is used for composites with hybrid filling. Deflection of measured and theoretical Young's modulus value of composite filled with kaolin was decreased by established correction from 21% to 1% and for composites filled with limestone from 13% to 9%. In this manner it is possible to predict the Young's modulus of the samples prepared by 3D print.
APA, Harvard, Vancouver, ISO, and other styles
23

Halamíček, Lukáš. "Návrh 3D tiskárny s dvojicí tiskových hlav." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318389.

Full text
Abstract:
The master thesis deals with design of multi material FDM 3D printer. In the first part, current market situation and possible principles of multi material printing are described. Possible variants of individual construction nodes are described in the next part and then the selected variant is processed into a design solution. The benefit of this thesis is a proposal of solution for the automatic printing head exchange, which is practically not concerned by printer manufacturers.
APA, Harvard, Vancouver, ISO, and other styles
24

Macháček, Marek. "Návrh variantní výrobní technologie oběžného kola ventilátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-451201.

Full text
Abstract:
The thesis considers a change in the manufacturing technology of a fan impeller from welding to 3D printing. The wish of the manufacturer was to investigate if such a change is possible and financially profitable and decide on a further approach to manufacturing. Models were created using information from the manufacturer and using them, conditions for manufacturing the impeller in the 1:1 ratio were derived. Based on the new technological process and the experience from prints a new price calculation for the fan impeller using 3D printing was created.
APA, Harvard, Vancouver, ISO, and other styles
25

Němec, Radek. "3D tiskárna typu Delta." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400691.

Full text
Abstract:
This master thesis is about design and construction of FDM delta 3D printer which consists of 32-bit electronics, magnetics printer head and other necessary peripheries. Opening chapters of this thesis are about theory of 3D printing and its methods with description of FDM 3D printers and summarization of FDM plastic materials used for 3D printing. The next part is about used electronics and problematic of heat transfer. The main part of this thesis describes design and construction of 3D printer and its necessary peripheries, which includes creation of its 3D model and application for 32bit controller. 3D model of delta 3D printer and its heating components was created in CAD software SolidWorks. The last part includes description of commissioning and calibration of delta 3D printer with summarization of economic aspects of its creation.
APA, Harvard, Vancouver, ISO, and other styles
26

Vašek, Vojtěch. "Použití modelů zhotovených technologii 3D tisku při výrobě odlitků do bentonitových forem na formovací lince." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319282.

Full text
Abstract:
Shortening of the time required to make first product after demand is a crucial factor in every field of industry, not excluding the foundry. To lower this delay, there are rapid prototyping methods. The aim of this thesis is to execute an experiment and then evaluate possibilities of using patterns made by 3D FDM printer on an automatic molding line.
APA, Harvard, Vancouver, ISO, and other styles
27

Strnad, Jiří. "Návrh malé multifunkční modelářské CNC frézky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444277.

Full text
Abstract:
This diploma thesis deals with the construction proposal of a small multifunctional modeller CNC milling machine that enables milling of aluminium alloys and 3D printing using the FDM method. Based on the research, analyzes and defined entry requirements the construction proposal is created and verified by calculations. The thesis contains a description of all the construction parts including the printhead, the tool tray and the safety cover. The other part of the thesis describes the machine geometry adjustment and specifies the choice of control system. The thesis includes a 3D model and the drawing documentation of selected structural nodes.
APA, Harvard, Vancouver, ISO, and other styles
28

Světlík, David. "Povrchová úprava ABS součástí po 3D FDM tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232057.

Full text
Abstract:
This master thesis deals with the surface treatment of parts made of plastic produced using FDM technology and design of technological device for surface treatment. The thesis describes FDM principles, according to performed experiments in a technological device there are suggested technological conditions for the surface treatment of parts made of ABS plastic. In the end of the thesis, there are calculated costs of the technological device and its operating costs, also mechanical properties, surface roughness and other specifications from before and after the treatment are compared.
APA, Harvard, Vancouver, ISO, and other styles
29

Musil, Jiří. "Hledání tvaru skořepinových konstrukcí." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-390254.

Full text
Abstract:
The theme of this doctoral thesis is the design of concrete shell structures with the focus on finding their optimal shape. The optimal shape of a concrete shell is the shape in which for a given load (usually the dead weight of the structure) no significant bending moments are generated in the shell and the structure is in the so-called membrane state. The inspiration for this thesis is the work of Swiss engineer Heinz Isler, who developed the shapes of shell structures using model tests of appropriately loaded flexible membranes. He developed the shell structure for large spans by inverting the resultant shape, which carried its weight almost entirely via membrane forces. The numerical solution of the above experiments using Midas Civil is presented herein. The basic principles of the method are demonstrated on the example of sagged cable. The numerically found shapes are compared with the analytical solution. A shell is designed based on the numerically found shapes and its stress response to dead load is described, particularly in relation to the membrane action. In the next part, the acquired knowledge and methods were used to design three relatively complicated shell structures. Each structure was statically analysed and its static behaviour was described. Structures with perfectly rigid or flexible supports, which simulate real behaviour of the supports, were studied. In the final phase, the results of static analysis of the selected shell were experimentally verified on a physical model in a scale of 1: 55.56. The model has been built using 3D printing. The thesis describes the use of a modelling similarity, the model design, the production process, and the experiment. The load test confirmed the optimal design of the shell structure and the validity of the numerical method for finding their shapes.
APA, Harvard, Vancouver, ISO, and other styles
30

Mikulášek, Michal. "Zařízení pro zaznamenávání proudové spotřeby LPWA senzorů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413004.

Full text
Abstract:
This Master thesis deals with the design and construction of a measuring device for measuring and the current consumption logging of sensors using LPWAN (Low Power Wide Area Network) technology. The theoretical part of the thesis firstly summarizes selected LPWAN technologies. Selected technologies, namely: LoRaWAN, Sigfox and Narrowband IoT (NB-IoT), are described more in detail. Further, the current measurement techniques are briefly discussed. The main focus is given to the current shunt measuring methods. The second half of thesis describes procedures conducted during the design and construction of a measuring device. The current measuring is based on the current shunt circuit complemented by the voltage amplification circuit, whose output is subsquently converted into digital form using an AD converter. The thesis describes in great detail the procedures for selecting individual components and important processes used in design of printed circuit boards. An integral part of the measuring device implementation is the design and implementation of control software, which is described in detail and supplemented by workflow charts underlining the entire description. The implementation of the entire measuring device is completed by the design and implementation of the cover box using 3D printing technology. Finally, the specifications of designed device are briefly discussed based on the limits of the used components.
APA, Harvard, Vancouver, ISO, and other styles
31

Kotačka, Petr. "Zařízení na výrobu vlákna z termoplastu PET pro použití k 3D tisku metodou FDM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254355.

Full text
Abstract:
This thesis deals with design of equipment for the production of PET termoplastic fibre to be used in 3D printing by means of FDM method. Concise survey of plastics processing methods is presented herein, furthermore, structural design of equipment with necessary engineering calculations is included as well. Drawing documents with the total economic evaluation is a part of this thesis too.
APA, Harvard, Vancouver, ISO, and other styles
32

Žlebek, Michal. "Konstrukce 3D tiskárny pro materiály s vyšší pevností." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231780.

Full text
Abstract:
Thesis deals with FDM 3D printing method and testing capabilities of optimum printing conditions for different materials. The aim of this work is to design and manufacture of experimental device that enables printing to investigate these conditions. A device designed in this work was named UK3DP and allows dual color object printing with maximum dimensions of the square base of 150 mm and a height of 150 mm. Before printing, the user can set almost all parameters affecting the printing process, including air temperature in heated chamber that is part of it. To verify the functionality several materials are tested, including ABS, PC and PEI. It also describes basic verification of the influence of selected parameters on the print result. Performs tensile tests confirming the influence of ambient temperature during printing on the quality of fiber connections, examines the final quality of the surface for each layer height and compares the resulting deformation of printed objects with other printers. The result of this work is a 3D printer capable of testing printing conditions for both existing and new types of materials with a range of user adjustable parameters.
APA, Harvard, Vancouver, ISO, and other styles
33

Michálek, Mojmír Cyril. "Výpočtové modelování procesu 3D tisku součástí z PET-G materiálu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-418192.

Full text
Abstract:
Master’s thesis deals with computational modeling of 3D printing process done by FDM method made from PETG material using finite element method. Research section contains a brief description of 3D printing process modeling possibilities using finite element method and summarizes fundamental mechanical properties of thermoplastics. In practical section there is an evaluation of specimens printed of PETG material tensile tests. Further there is performed a sensitivity analysis of various influences on vertical imperfection of printed part Idler and is done its design modification, which is based on results of this analysis.
APA, Harvard, Vancouver, ISO, and other styles
34

Hracki, Filip. "3D tisk modelového zařízení slévárenské formy." Master's thesis, 2019. http://www.nusl.cz/ntk/nusl-428401.

Full text
Abstract:
This thesis describes current technologies for a manufacture of wooden pattern equipment. It deals with machines, constructions and materials. Moreover, this study concerns particular technologies of 3D printing and materials used for printing. Its practical part includes a manufacture and mechanical trials of standard samples produced by 3D technologies FDM. The aim is to optimize a manufacturing process of 3D printing of a particular sample. The optimization considers manufacturing time, material consumption and mechanical strength, i.e. impact strength. The results of this study are conclusions and proposals for pattern equipment manufacturers who use the 3D technology.
APA, Harvard, Vancouver, ISO, and other styles
35

CVRČEK, Tomáš. "Technické aspekty použití 3D tisku ve výuce na ZŠ." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-204721.

Full text
Abstract:
This thesis in the beginning deals with the history of 3D printing and its development. For better understanding the nature of 3D printing are the significant technologies that includes. Professional part includes work with the printer MakerBot Replicator 2X. Mechanical parts of the device are analyzed together with the operating software MakerBot DesktopThe following chapter is dealing with the limits and restrictions when it is printed on said 3D printer, except that describes important aspects when working on the printer. For the creation of electronic models are suggested appropriate programs for use in elementary school. A significant milestone is forming the problems of 3D printing, which can serve as a guide for the elimination of print quality problems, malfunctioning of 3D printers and others. Interesting models are designed for teaching physics and working activities that the students facilitate understanding of the substance of the response and act as activating element within lesson. It was created a list of important sites where you can find models suitable not only for teaching in elementary schools, but also for other purposes. The last chapter deals with the economic aspect of 3D printing.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography