Relevant bibliographies by topics / 3D FDM tisk

Contents

  1. Dissertations / Theses

Academic literature on the topic '3D FDM tisk'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '3D FDM tisk.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "3D FDM tisk"

1

Műller, Jakub. "Kompozitní tisk pro 3D FDM tiskárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382278.

Full text
Abstract:
This diploma thesis deals with the study of 3D printing based on the FDM method. This method focuses on the possibility of using two extruders it means that the composite parts can be printed. This diploma thesis describes the available variants of composite printing currently on the market. Based on the gained knowledge and the availability of 3D printers and software, individual variants of composite parts were printed. A tensile test was performed on these samples to determine the strength characteristics. Additionally, compatibility and adhesion of two selected materials were tested. Based on the testing is made an evaluation of the achieved results, effectiveness and feasibility.
APA, Harvard, Vancouver, ISO, and other styles
2

Hrdlička, Martin. "Vliv teploty vzduchu na FDM 3D tisk." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318133.

Full text
Abstract:
The thesis deals with 3D printing by the FDM and ambient temperature on print quality. The thesis describes the principle of printing by the FDM method and the occurrence of errors caused by the influence of ambient temperature. The aim of the thesis is to design a heated chamber for RepRap Prusa i3 printer, its construction and subsequent testing of ambient temperature influence on print quality. To test the occurrence of the described errors, specific tests and materials are selected in the work. The result of this work is the recommended ambient temperature in the heated chamber for improved FDM printing.
APA, Harvard, Vancouver, ISO, and other styles
3

Rafaja, Hynek. "Monitorování procesu FDM tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399310.

Full text
Abstract:
The target of this work is the development of a monitoring system for 3D printing by the Fused Deposition Modeling method, which will be able to identify printing error conditions. During the solving process the needed error conditions were identified. Then, an algorithm was programmed to identify the error condition using the criterion. The resulting Monitoring Hardware was implemented in the printer and experimentally verified. A system has been developed that can identify error conditions with an accuracy of 94.7%. The main benefit of this work is the automatic identification of error conditions that stop printing if necessary. This leads to a reduction in scrap and cost savings. In the future, the software could automatically adjust the print parameters when identifying an error condition. This would prevent or completely eliminate the error condition without user intervention.
APA, Harvard, Vancouver, ISO, and other styles
4

Kratochvíl, Tomáš. "3D FDM tiskárna reprap a parametry tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232069.

Full text
Abstract:
This master thesis summarizes the current knowledge about non-commercial 3D printing FDM technology. The goal of this thesis is to demonstrate the gained knowledge by building a 3D printer which can partially replicate itself, and to evaluate its technological parameters. The experimental part of this work is focused on the impact of the changes in technological parameters of printing on mechanical properties of printed parts.
APA, Harvard, Vancouver, ISO, and other styles
5

Břoušek, Lukáš. "Tepelné úpravy povrchu po 3D FDM tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318156.

Full text
Abstract:
The topic of diploma thesis are surface heat treatments after 3D print by method Fused Deposition Modeling. In the introduction is located recherche of the given issue. Further, we describe the construction and process of the 3D printer construction, on which will be printed samples for experiments in the next part of the thesis. The aim is to determine the behavior and changes of surface structures of heat-affected samples from different materials. Furthermore, the suitability of the used methods and the possibility of their use in practice.
APA, Harvard, Vancouver, ISO, and other styles
6

Zítka, Lukáš. "Inovace 3D tiskárny typu Rep Rap." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319860.

Full text
Abstract:
The present Master thesis is focused on innovation and verification of the functionality of a 3D RepRap. The theoretical part of the thesis characterizes individual additive technologies. The practical part is focused on the design of the technical modifications of the printer in order to achieve the quality of the printing, while the current 3D printer design is compared with the innovative solution. The practical part tests the setting of print parameters, various materials for 3D printing and necessary finishing operations. The thesis is completed
APA, Harvard, Vancouver, ISO, and other styles
7

Bouchal, Petr. "Vývoj 3D FDM tiskárny implementace na trh." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241863.

Full text
Abstract:
The result of this thesis is to create an overview of available 3D printing technologies, design a 3D FDM printer, create an instructional manual on the assembling and create a business model of a 3D printing company.
APA, Harvard, Vancouver, ISO, and other styles
8

Prouza, Tomáš. "Návrh duální tiskové hlavy pro FDM 3D tiskárnu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-242851.

Full text
Abstract:
This master thesis is focused on a research in the field of 3D printing technology. During the research a particular technology, being regularly applied by the RepRap printers, is described. Mentioned technology is tested on a Rebel II printer model. The findings are applied to the dual 3D extruder design project. This dual 3D extruder is designed and made in two basic options, where the first option discovers the shortcomings and the second option is modified and tested. In the following step, assessment of applicability, functionality, as well as economic analysis of production of this dual 3D extruder is made.
APA, Harvard, Vancouver, ISO, and other styles
9

Čuma, Zdeněk. "3D FDM tiskárna s výměnnou tiskovou hlavou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444263.

Full text
Abstract:
The aim of the work is to design and manufacture a mechanism for setting up and clamping the replaceable head of a 3D FDM printer. The first part of the thesis deals with 3D printing in general, the second part describes the FDM method. Part three is devoted to the selection and construction of a suitable 3D printer, the fourth part to the actual design of the head attachment. In the fifth part, a technical and economic evaluation is carried out.
APA, Harvard, Vancouver, ISO, and other styles
10

Butakov, Aleksandr. "Návrh úpravy rámu 3D FDM delta tiskárny pro zvýšení kvality tisku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417414.

Full text
Abstract:
This work is focused on solving the problems of delta 3d printer frame rigidity and impact of rigidity on final quality of 3d printing. A variant of a 3d printer on a classic Kossel-shaped frame has designed and built. Further, frame strength analysis and improvement design is performed, with subsequent production of a new variant and comparison of the 3d printing results of both variants. The result of this work is to show how the frame construction really affects the print quality.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic '3D FDM tisk' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography