Academic literature on the topic '378.096:621.3'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '378.096:621.3.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "378.096:621.3"
Xiong, Yu, Ji Zheng, Song Lin Li, Xue Jia Liu, and Lu Liang. "Investigation on Nano-Sized ZnO Powder Doped with Al3+ Prepared by Sol-Gel Method." Advanced Materials Research 621 (December 2012): 3–7. http://dx.doi.org/10.4028/www.scientific.net/amr.621.3.
Full textHe, Ai Dong, Bang Yan Ye, and Zi Yuan Wang. "Experimental Effect of Cryogenic MQL Cutting 304 Stainless Steel." Key Engineering Materials 621 (August 2014): 3–8. http://dx.doi.org/10.4028/www.scientific.net/kem.621.3.
Full textWu, Jin Wu, and Hai Peng Yuan. "Effect of Orientation Angle on Acoustic Radiation Mode Amplitudes of Laminated Composite Plates." Applied Mechanics and Materials 621 (August 2014): 3–6. http://dx.doi.org/10.4028/www.scientific.net/amm.621.3.
Full textFernandes, Shanlley Cristina da Silva, Rafaella Souza dos Santos, Erica Albanez Giovanetti, Corinne Taniguchi, Cilene Saghabi de Medeiros Silva, Raquel Afonso Caserta Eid, Karina Tavares Timenetsky, and Denise Carnieli-Cazati. "Impact of respiratory therapy in vital capacity and functionality of patients undergoing abdominal surgery." Einstein (São Paulo) 14, no. 2 (June 2016): 202–7. http://dx.doi.org/10.1590/s1679-45082016ao3398.
Full textBarros, Hellen Siglia Demetrio, Eniel David Cruz, Adriano Gonçalves Pereira, and Edvaldo Aparecido Amaral da Silva. "FRUIT AND SEED MORFOMETRY, SEED GERMINATION AND SEEDLING VIGOR of Parkia gigantocarpa." FLORESTA 50, no. 1 (December 20, 2019): 877. http://dx.doi.org/10.5380/rf.v50i1.56855.
Full textWang, Huijun, Bing Zhang, and Shufa Du. "Trends of body mass index among children and adolescents in China, 1997‐2011 (621.3)." FASEB Journal 28, S1 (April 2014). http://dx.doi.org/10.1096/fasebj.28.1_supplement.621.3.
Full textSchäffer, Michael W., Somdutta Sinha Roy, Shyamali Mukherjee, and Salil K. Das. "Improved High‐Performance Liquid Chromatography Method with Diode Array Detection for Simultaneous Analysis of Retinoic Acid Isomers, Retinol, Retinyl esters, Vitamin E, and Selected Carotenoids in Guinea Pig Tissues." FASEB Journal 22, S1 (March 2008). http://dx.doi.org/10.1096/fasebj.22.1_supplement.621.3.
Full textLutz, Laura J., Erin Gaffney‐Stomberg, Jenna L. Scisco, Stefan M. Pasiakos, Susan McGraw, Sonya J. Cable, Andrew J. Young, and James P. McClung. "Sex differences in diet quality and health measures in US Soldiers entering initial military training." FASEB Journal 27, S1 (April 2013). http://dx.doi.org/10.1096/fasebj.27.1_supplement.621.3.
Full textBrotto, Leticia, Robin Craig, Todd Hall, Michael Loghry, Hector Valdivia, Thomas Nosek, J. Shen, C‐K Qu, and Marco Brotto. "MIP/MTMR14 is implicated in skeletal muscle aging." FASEB Journal 24, S1 (April 2010). http://dx.doi.org/10.1096/fasebj.24.1_supplement.621.3.
Full textKulkarni, Priyanka, and Kenza Benzeroual. "Neuroprotective effect of flavonoids, via up‐regulating Nrf2‐ARE pathway, in MPP + ‐induced PC12 cells, as a model of Parkinson's disease." FASEB Journal 29, S1 (April 2015). http://dx.doi.org/10.1096/fasebj.29.1_supplement.621.3.
Full textDissertations / Theses on the topic "378.096:621.3"
Гура, Тетяна Віталіївна. "Формування управлінської компетентності випускників електромашинобудівних спеціальностей технічних університетів." Thesis, Класичний приватний університет, 2011. http://repository.kpi.kharkov.ua/handle/KhPI-Press/17629.
Full textThe dissertation on gaining of a candidate’s scientific degree of pedagogical sciences on a speciality 13.00.04 – theory and method of professional education. – Classic Private University. – Zaporozhye, 2011. In the dissertation the issues of formation of the managerial competence in the higher technical establishment are considered. The concept of "competence", "managerial competence" are clarified. The basic structural components of the managerial competence of the future engineers of electromachinebuilding directions are covered. The complex of pedagogical conditions for the managerial competence formation is determined. In the course of the experimental validation of the pedagogical conditions it is established that the introduction of author’s model and certain pedagogical conditions leads to formation of the managerial competence of the graduates of electromachinebuilding specialties of technical universities.
Biller, Martin [Verfasser], Johann [Akademischer Betreuer] Jäger, Johann [Gutachter] Jäger, and Markus [Gutachter] Zdrallek. "Schutzalgorithmen für dynamisch vermaschte Ringnetzstrukturen mit dezentraler Einspeisung / Martin Biller ; Gutachter: Johann Jäger, Markus Zdrallek ; Betreuer: Johann Jäger." Erlangen : FAU University Press, 2021. http://d-nb.info/1238359108/34.
Full textWruk, Julian [Verfasser]. "An Optimisation Approach to Automated Strategic Network Planning at Low-Voltage Level / Julian Wruk." Berlin : epubli, 2021. http://d-nb.info/1239980744/34.
Full textAntolino, Rivas David. "Reputation systems and secure communication in vehicular networks." Doctoral thesis, Universitat Politècnica de Catalunya, 2013. http://hdl.handle.net/10803/117532.
Full textDi, Virgilio Vito. "Contactless electrowetting." Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/325140.
Full textLa tecnología "Electrowetting", conocida desde hace más de 100 años, solo recientemente ha podido ser aplicada con éxito a dispositivos como pixeles, lentes líquidas y µTas (sístemas integrados de análisis). Algunos de estos productos ya se encuentran en el mercado, otros estan a punto de llegar a la madurez necesaria para ser comercializados, aún así, muchos aspectos fundamentales del fenomeno del "electrowetting" no están del todo claros, por ejemplo, el origen de la saturación del ángulo de contacto y las fuerzas que inducen la variación de este ángulo. En este trabajo de investigación se presentan varias contribuciones para entender mejor la technología "electrowetting". Primero, se han presentado evidencias preliminares de la variación "sin contacto" de ángulo de contacto. A continuación, estas observaciones han sido estudiadas profunda y rigurosamente con trabajo experimental. Finalmente, los resultados experimentales del electrowetting sin contacto han permitido entender que lo que induce la variación del ángulo de contacto es la carga. El "electrowetting" sin contacto permite la medida experimental del impacto de la húmedad de la atmosfera en las dinámicas del "electrowetting" y las limitaciones que ésta induce en el ángulo de contacto final. La relación entre la húmedad relativa del átmosfera y la saturación del ángulo de contacto es directa: contra más húmedad, más alto es el ángulo en saturación, en linea con las predicciones de la ley de Peek, en este caso, aplicado a microescala. La última parte del trabajo se ha dedicado a estudiar el control en carga de un dispositivo electrowetting para poder predecir y controlar las dinámicas de variación del ángulo de contacto. Como resultado adicional, se ha visto que el control de inyección de carga afecta la velocidad de variación del ángulo de contacto, con efectos segundarios despreciables en el ángulo final en saturación. Cruzando los resultados experimentales con las predicciones teóricas ha sido verificado que la aproximación de la gota a un casquete esférico da buenos resultados teóricos mientras no se ha podido dar ninguna contribución clara para la resolución del problema del ángulo de contacto, dejando abierto el tema. En este trabajo contiene además una revisión del estado del arte de la tecnología electrowetting y una descripción detallada del método de simulación multifísica usado.
Galindo, Lorente Sergi. "Studies on organic solar cells based on small-molecules : tetraphenyldibenzoperiflanthene and fullerene C70." Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/325421.
Full textEn aquesta tesi s’investiguen cèl·lules solars orgàniques basades en semiconductors de petita molècula. En particular, les cèl·lules solars orgàniques d’aquesta tesi han emprat tetraphenyldibenzoperiflanthene com material donador i ful·lerè C70 com material acceptador. En la primera part d'aquesta tesi, ens centrem en la influència de la densitat d'estats de la capa donadora en els paràmetres característics de les cèl·lules solars. Més endavant, es presenten cèl·lules solars orgàniques amb una estructura p-i-n, on la capa intrínseca s'obté per l'evaporació conjunta del donador i l’acceptador. S'analitza la influència del gruix de la capa intrínseca de la cèl·lula solar p-i-n en la característica de la cèl·lula solar. En la segona part, es presenta un circuit equivalent per a les cèl·lules solars orgàniques. S'afegeix un nou terme en el model estàndard que representa les pèrdues de recombinació a la capa activa del dispositiu. L’anàlisi de les característiques de corrent-tensió mesurades a diferents intensitats de llum permeten l'estimació del terme de recombinació. El model separa clarament les qüestions tecnològiques (resistències en sèrie i en paral·lel) dels efectes relacionats amb la física del dispositiu (pèrdues de recombinació). També permet l’obtenció d’un producte de la mobilitat - temps de vida efectiu a la capa activa del dispositiu a ser determinat, la caracterització del seu estat de degradació.
Margarit, Taulé Josep Maria. "Low-power CMOS digital-pixel Imagers for high-speed uncooled PbSe IR applications." Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/336094.
Full textLa present tesi doctoral descriu la recerca i el desenvolupament d'una nova tecnologia monolítica d'imatgeria infraroja de longitud d'ona mitja (MWIR), no refrigerada i de baix cost, per a usos industrials d'alta velocitat. El treball pren el relleu dels últims avenços assolits pel soci industrial NIT S.L. en el camp dels detectors MWIR de PbSe depositats en fase vapor (VPD), afegint-hi coneixement fonamental en la investigació de noves tècniques de disseny de circuits VLSI analògics i mixtes pel desenvolupament del dispositiu integrat de lectura unit al detector pixelat. Es parteix de la hipòtesi que, mitjançant l'ús de les esmentades tècniques de disseny, les tecnologies CMOS estàndard satisfan tots els requeriments operacionals del detector VPD PbSe respecte a connectivitat, fiabilitat, funcionalitat i escalabilitat per integrar de forma econòmica el dispositiu. La càmera PbSe-CMOS resultant ha de consumir molt baixa potència, operar a freqüències de kHz, exhibir bona uniformitat, i encabir els píxels actius CMOS de lectura en el pitch compacte del pla focal de la imatge, tot atenent a les particulars característiques del detector: altes relacions de corrent d'obscuritat a senyal, elevats valors de capacitat paràsita a l'entrada i dispersions importants en el procés de fabricació. Amb la finalitat de complir amb els requisits previs, es proposen arquitectures de sensors de visió de molt baix acoblament interpíxel basades en l'ús d'una matriu de pla focal (FPA) de píxels actius exclusivament digitals. Cada píxel sensor digital (DPS) està equipat amb mòduls de comunicació d'alta velocitat, autopolarització, cancel·lació de l'offset, conversió analògica-digital (ADC) i correcció del soroll de patró fixe (FPN). El consum en cada cel·la es minimitza fent un ús exhaustiu del MOSFET operant en subllindar. L'objectiu últim és potenciar la integració de les tecnologies de sensat d'imatge infraroja (IR) basades en PbSe per expandir-ne el seu ús, no només a diferents escenaris, sinó també en diferents estadis de maduresa de la integració PbSe-CMOS. En aquest sentit, es proposa investigar un conjunt complet de blocs funcionals distribuïts en dos enfocs paral·lels: - Dispositius d'imatgeria MWIR "Smart" basats en frames utilitzant noves topologies de circuit DPS amb correcció de l'FPN en guany i offset. Aquesta línia de recerca exprimeix el pitch del detector per oferir una programabilitat completament digital a nivell de píxel i plena funcionalitat amb compensació de la capacitat paràsita d'entrada i memòria interna de fotograma. - Dispositius de visió MWIR "Compact"-pitch "frame-free" en base a un novedós esquema d'integració analògica en el DPS i diferenciació temporal configurable, combinats amb protocols de comunicació asíncrons dins del pla focal. Aquesta estratègia es concep per permetre una alta compactació del pitch i un increment de la velocitat de lectura, mitjançant la supressió del filtrat digital intern i l'assignació dinàmica de l'ample de banda a cada píxel de l'FPA. Per tal d'independitzar la validació elèctrica dels primers prototips respecte a costosos processos de deposició del PbSe sensor a nivell d'oblia, la recerca s'amplia també al desenvolupament de noves estratègies d'emulació del detector d'IR i plataformes de test integrades especialment orientades a circuits integrats de lectura d'imatge. Cel·les DPS, dispositius d'imatge i xips de test s'han fabricat i caracteritzat, respectivament, en tecnologies CMOS estàndard 0.15 micres 1P6M, 0.35 micres 2P4M i 2.5 micres 2P1M, tots dins el marc de projectes de recerca amb socis industrials. Aquest treball ha conduït a la fabricació del primer dispositiu quàntic d'imatgeria IR d'alta velocitat, no refrigerat, basat en frames, i monolíticament fabricat en tecnologia VLSI CMOS estàndard, i ha donat lloc a Tachyon, una nova línia de càmeres IR comercials emprades en sistemes de control industrial, mediambiental i de transport en temps real.
Egea, Àlvarez Agustí. "Multiterminal HVDC transmissions systems for offshore wind." Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/279365.
Full textL'energia eòlica marina emergeix com un dels vectors energètics del futur. Les localitzacions eòliques marines proporcionen vens més forts i constants que les terrestres, cosa que permet extreure més potència. A més a més, els aerogeneradors marins poden ser més grans i més potents ja que es redueixen les limitacions de gàlib existent en les infraestructures terrestres. A tall d'exemple, l'any 2013 a Europa es van instal.lar 1.567 MW de potència eòlica marina, cosa que representa un 14\% de la potència eòlica instal.lada a Europa. Els parcs eòlics marins poden ser connectats a la xarxa elèctrica terrestre utilitzant emparamenta convencional de corrent alterna, però quan la distancia amb la costa excedeix els 80-100 km l'ús d'aquesta tecnologia es torna econòmicament inviable degut a l'energia reactiva generada en els conductors. Per solucionar aquest problema, s'emparen els sistemes en corrent continua basats en convertidors estàtics. Els projectes construïts o projectats a dia d'avui es basen en esquemes de connexió punt-a-punt, on, cada parc eòlic o agrupació de parcs eòlics es troba connectat a la xara terrestre individualment. En conseqüència, l'operació d'aquestes línies es pot considerar com una extensió de la xarxa d'alterna. Però, si s'interconnecten diferents parc eòlics amb diferents xarxes terrestres d'alterna (per exemple, diferents països) en corrent continua, s'obtenen xarxes en corrent continua. Aquest nou escenari crea un dels majors reptes des de la creació dels sistema elèctric de potencia, ara fa més de 100 anys. Entre aquests reptes hi ha l'estabilitat i l'operació dels sistemes en corrent contínua i la seva integració i coexistència amb les xarxes en corrent alterna. En la present tesis s'han estudiat diferents aspectes dels futurs sistemes multi terminal en alta tensió en corrent contínua (HVDC, en anglès) per la transmissió de potencia generada mitjançant parcs eòlics marins. Primerament, es descriu el control de tensió i els modes d'operació dels sistemes multi terminal i es verifiquen en una plataforma experimental construïda per aquest propòsit. L'estabilitat de tensió dels sistemes en corrent continua, es pot veure afectada durant una falta a la xarxa d'alterna degut a la reduïda inèrcia dels sistemes multi terminal, només formada pels condensadors dels convertidors i els cables. Així la potència que no pot injectar a la xarxa ha de ser reduïda de forma ràpida i eficient. Per això, en aquesta tesis es presenta un sistema coordinat de reducció de potència que utilitza la resistència de frenat dels convertidors de connexió a la xarxa i els mètodes de reducció de potència dels parcs eòlics. Des del punt de vista de la integració de les xarxes en continua i en alterna, el punt d'interconnexió pot estar localitzat llunys dels grans centres de generació, la qual cosa implica tenir una potència de curtcircuit molt reduïda. En la bibliografia científica s'han descrit diverses problemàtiques a l'hora de connectar un convertidor de commutació forçada a les xarxes dèbils. Per tal de pal.liar aquests inconvenients, en aquesta tesis es presenta un algorisme avançat de connexió de convertidors a xarxes dèbils basat en control vectorial. Des del punt de vista de les interaccions i interoperabilitat dels sistemes en corrent alterna i continua, no n'hi ha suficient en garantir l'estabilitat, ja que el propòsit finals dels operadors de xarxa és fer fluir una potencia a traves de la xarxa per tal de satisfer la demanda. Per aquest propòsit en aquesta tesis es presenta un control jeràrquic de control del flux de potència que fixa el flux de potència a traves d'una xarxa multi terminal canviant les consignes del control primari, tot assegurant l'estabilitat del sistema. Per tancar la tesis, es presenta un nou controlador per parcs eòlics basats en aerogeneradors de gàbia d'esquirol controlats per un sol convertidor.
Gómez, Fernández Sergio. "Regular cell design approach considering lithography-induced process variations." Doctoral thesis, Universitat Politècnica de Catalunya, 2014. http://hdl.handle.net/10803/284205.
Full textLos continuos retrasos en la implementación de la EUVL, fuerzan que el diseño de IC se realice mediante litografía de longitud de onda de 193 nm con innovadoras y costosas técnicas para poder combatir variaciones de proceso de litografía. La gran diferencia entre la longitud de onda y el tamaño de los patrones causa severas distorsiones debido a la difracción óptica en los patrones impresos y por lo tanto degradando el yield. En consecuencia, es necesario realizar un cambio en el diseño de layouts hacia diseños más regulares para poder mejorar la resolución de los patrones. Sin embargo, todavía no está claro el grado de regularidad que se debe introducir y como medir los beneficios y los perjuicios de los diseños regulares. El objetivo de esta tesis es buscar el grado de regularidad necesario para combatir las variaciones de litografía y mejorar la calidad del layout de un diseño. Las principales contribuciones para conseguirlo son: (1) la definición de diversas reglas de diseño de layout para mitigar las variaciones de litografía; (2) la propuesta de un modelo para estimar el yield paramétrico y así evaluar el impacto de la litografía en el diseño de layout; (3) el diseño de una métrica para analizar la calidad de un layout (LQM) incluyendo una métrica para capturar el grado de regularidad de un diseño (RM) y; (4) la creación de diferentes tipos de layout explotando los beneficios de la regularidad, referidos como Adaptative Lithography Aware Regular Cell Designs (ALARCs). La primera parte de la tesis, propone las diversas reglas de diseño para layouts regulares derivadas de simulaciones de litografía de tal manera que las fuentes de variación de litografía son minimizadas. Además, se propone una metodología de diseño para layouts regulares, referida como "gate biasing" para contrarrestar las variaciones sistemáticas dependientes del layout, las variaciones en la ventana de proceso del sistema litográfico y el efecto de puerta no rectilínea para configurar la longitud del canal del transistor correctamente. La segunda parte de la tesis, detalla el modelo de estimación del yield de litografía para predecir mediante un número reducido de simulaciones de litografía la cantidad de distorsión que se espera en un layout impreso debida a "hotspots". Se propone una eficiente metodología que identifica los distintos patrones de un layout, los simplifica para facilitar el análisis de los patrones y los clasifica en relación a la degradación predecida mediante simulaciones de litografía. El modelo de yield se calibra utilizando medidas de tiempo de un número reducido de idénticos circuitos de test implementados en una tecnología CMOS de 40nm y de esta manera, se utilizan datos de silicio para obtener una estimación realista del yield. La tercera parte de este trabajo, presenta una métrica para medir la calidad del layout (LQM), que considera diversos aspectos para dar una evaluación global de un diseño mediante un único valor. La LQM puede ajustarse mediante la asignación de diferentes pesos para cada métrica de evaluación o modificando los parámetros analizados. La LQM se configura mediante dos conjuntos de medidas diferentes. Además, ésta incluye una métrica de regularidad (RM) para capturar el grado de regularidad que se aplica en un diseño. Finalmente, esta disertación presenta los distintos diseños ALARC para una tecnología de 40nm utilizando diversos grados de regularidad y diferentes impactos en área. La calidad de estos diseños se demuestra creando automáticamente una librería de 266 celdas incluyendo celdas combinacionales y secuenciales y, sintetizando diversos circuitos ITC'99. Las librerías regulares solo presentan un 9% de impacto en área comparado con diseños de celdas estándar 2D y por tanto proponiendo diseños competitivos en área. La evaluación de los circuitos considerando la LQM muestra que los diseños regulares pueden mejorar otros diseños 2D dependiendo de la implementación del layout.
Pouyan, Peyman. "Reliability-aware memory design using advanced reconfiguration mechanisms." Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/328718.
Full textActualmente, el diseño de sistemas de memoria en circuitos integrados busca continuamente que sean más rápidos y complejos, lo cual se ha vuelto de gran necesidad para las unidades de computación modernas. Estos sistemas de memoria están integrados en forma de memoria embebida para una mejor manipulación de los datos y de su almacenamiento. Dicho objetivo ha sido conseguido gracias al agresivo escalado de las dimensiones del transistor, el cual está llegando a las dimensiones nanométricas. Ahora bien, tal progreso ha conllevado el inconveniente de una menor fiabilidad, dado que ha sido altamente difícil obtener elevados rendimientos de los chips. La variabilidad de proceso - debido a las imperfecciones de fabricación - junto con la degradación de los dispositivos - principalmente inducido por el elevado campo eléctrico y altas temperaturas - son dos de las más relevantes amenazas que no pueden ni deben ser ignoradas por más tiempo en los circuitos embebidos de memoria, echo que puede tener un elevado impacto en su robusteza final. Static Random Access Memory (SRAM) es una de las celdas de memoria más utilizadas en la actualidad. Generalmente, estas celdas son implementadas con las menores dimensiones de dispositivos, lo que conlleva que el estudio de su robusteza es de gran relevancia en el actual paradigma de diseño en el rango nanométrico. La fiabilidad de sus operaciones necesita ser considerada y conseguida tanto a nivel de celda de memoria como en el diseño de arquitecturas complejas basadas en celdas de memoria SRAM. Actualmente, con el diseño de sistemas basados en dispositivos de 10nm, dispositivos nuevos no-FET tales como los memristores están atrayendo una elevada atención como posibles candidatos para reemplazar las actuales tecnologías de memorias convencionales. A pesar de sus características favorables, tales como el bajo consumo como la alta escabilidad, ellos también padecen de relevantes retos de fiabilidad, como son la variabilidad de proceso y la degradación de la resistencia, la cual necesita ser mitigada tanto a nivel de dispositivo como a nivel arquitectural. Con todo esto, esta tesis doctoral afronta tales problemas de fiabilidad en memorias mediante la utilización de técnicas de reconfiguración avanzada. La consideración de nuevas estrategias de reconfiguración han resultado ser validas tanto para las memorias basadas en celdas SRAM como en `memristive crossbar¿, donde se ha observado una mejora significativa del tiempo de vida en ambos casos. Estas técnicas incluyen circuitos de monitorización para comprobar la fiabilidad de las unidades de memoria, y la implementación arquitectural con el objetivo de reconfigurar los sistemas de memoria hacia una configuración mucho más fiables antes de que el fallo suceda