Academic literature on the topic '2015 h-825'

Abstract Background We conducted a phase II study to investigate the feasibility and safety of preoperative radiochemo-therapy experimental fractionation, using intensity-modulated radiation therapy with simultaneous integrated boost (IMRT SIB) to shorten the overall treatment time without dose escalation in intermediate/locally advanced rectal cancer with the aim to improving treatment outcome. Patients and methods A total of 51 patients with operable stage II–III rectal carcinoma were included between January 2014 and January 2015. Fifty patients completed preoperative IMRT treatment with an elective dose of 41.8 Gy and simultaneously delivered 46.2 Gy to T2/T3 and 48.4 Gy to T4 tumour in 22 fractions, with concomitant capecitabine (825 mg/m2/12 h, including at weekends). Median follow-up was 70 months (range 11–80 m). Results Forty-seven patients completed treatment per protocol. Acute toxicity occurred in 2 (4%) patients. R0 resection was achieved in all but 1 and pathologic complete response (pCR) in 12 (25.5%) patients who had 5-year overall survival (OS), disease-free survival (DFS) and local control (LC) of 91.7%, 100% and 100%, respectively. The intention-to-treat analysis showed that the type of surgery significantly moderated OS and DFS, while total downstaging and pN were predictive for DFS only. For treatment per protocol 5-year OS, DFS and LC were 80.9% (95% confidence interval [CI] 69.7–92.1), 77.1% (95% CI 65.1–89.1) and 95.2% (95% CI 88.7–100), respectively. The proportion of patients with severe late (CTCAE G ≥ 3) gastrointestinal, urinary and sexual toxicity was 15%, 2% and 8% respectively, with one reported secondary carcinoma. Conclusions Preoperative IMRT-SIB without dose escalation was well tolerated, with a low acute toxicity profile, we achieved a high rate of pCR and showed encouraging 5-year OS, DFS and LC.

We explored the sustainable business practices of selected Philippine corporations that promote the quest for peace. We used three key indicators of sustainable business practices, namely, fostering economic development, espousing corporate citizenship, and respecting the rule of law, as our variables to measure our sustainable business practices construct. On the other hand, we adopted sustainable development and sound business environmental our variables to measure the quest for peace construct. We assumed that sustainable business practices and quest for peace are interlinked and mutually reinforcing. We anchored our study on the Theories of Positive Peace, Sustainable Development, and Humanistic Management. We used the qualitative exploratory research design and the holistic multiple case study research strategy. We used the qualitative exploratory research design and the holistic multiple case study research strategy. We selected through the non-probability purposive sampling technique, the 20 Publicly - Listed Companies in the Philippines. We then, utilized the monomethod as the data collection technique for selecting the Sustainability Reports published in 2018 and uploaded in the websites of the respective corporations. With this deductive approach, we specifically adopted the pattern matching analytical procedure in the process of our content analysis of information from the Sustainability Reports. Results on fostering economic development revealed numerous jobs created, training and development, as well as trade and business development programs and activities executed. Analysis on espousing corporate citizenship disclosed many programs and activities related to encourage the use of voice from the firm, community engagement, and governance implemented. Findings on respecting the rule of law showed also various programs and activities that cover compliance with Philippine laws, international laws, and environmental standards. Findings also indicated that the nexus of sustainable business practices and the quest for peace aims to build companies of enduring greatness by doing good and working toward a sustainable future. In conducting responsible business, they were able to help in attaining positive peace in our coun try, which, in return, is essential for sustainable development, as manifested by their significant contribution in achieving sustainable development/growth, working closely with regulators to achieve shared goals; and protecting the environment and preserving natural resources. We recommend that there should be a coordinated effort of all the stakeholders to ensure that there is an integrated and holistic approach in the sustainability of the business sector to promote positive peace.We also propose to undertake further research on employing quantitative approach by using business, financial, and socio-economic indicators to address the limitations of this study. ReferencesBoulding, E. (2000). Cultures of peace: The hidden side of history. Syracuse University Press. Brauch, H. G., Oswald Spring, U., Grin, J., Scheffran, J. (Ed.). (2016). Handbook on sustainability transition and sustainable peace. Springer.Cortright, D. (2009). Peace: A history of movements and ideas. Cambridge University Press.Creswell, J. (2014). Research design: Qualitative, quantitative, and mixed methods approaches (4th ed.). Sage Publications.Edralin, D. & Pastrana, R. (2019). Sustainability initiatives and practices of selected top universities in Asia, Europe, and USA. Bedan Research Journal. 4, April, 24-45.Elkington, J. (2018, June 25). 25 years ago I coined the phrase “triple bottom line.” Here’s why it’s time to rethink it. Harvard Business Review. https://hbr.org/2018/06/25-years-ago-i-coined-the-phrasetriple-bottom-line-heres-why-im-giving-up-on-it.Ercoşkun, Ö.Y. (2005). Sustainable city plans against development plans. Gazi University Journal of Science, 18(3): 529-544.Ford, J. (2015). Perspectives on the evolving “Business and Peace: Debate”. Academy of Management Perspective,29(4). https://doi.org/10.5465/amp.2015.0142Forrer, J., &Katsos, J. (2015). Business and peace in the buffer condition. Academy of Management Perspectives, 29(4), 438-450. http://dx.doi.org/10.5465/amp.2013.0130Forrer, J., Fort, T., & Gilpin, R. (2012). How business can foster peace.Washington, DC: United States. Institute of Peace. https://www.usip.org/sites/default/files/SR315.pdfFort, T. L. (2007). Business, integrity, and peace: Beyond geopolitical and disciplinary boundaries. Cambridge University Press.Fort, T.L., & Schipani, C.A. (2001, November). The role of the corporation in fostering peace (William Davidson Institute Working Paper No. 422). https://deepblue.lib.umich.edu/bitstream/handle/2027.42/39806/wp422.pdf?sequence=3Fort, T.L., & Schipani, C.A. (2003). Corporate governance and sustainable peace: Intra-organizational dimensions of business behavior and reduced levels of violence. Vanderbilt Journal of Transnational Law, 36(2), 367-386.Fort, T., & Schipani, C. (2004). The ecological challenges of war: The natural environment and disease. In the Role of Business in Fostering Peaceful Societies (pp. 183-222). Cambridge University Press. https://doi.org/10.1017/CBO9780511488634.007Fort, T.L., & Schipani, C.A. (2007). An action plan for the role of business in fostering peace. American Business Law Journal, 44(2), 359-377.Friedman, M. (1970, September). The social responsibility of business is to increase its profits. New York Times Magazine, 33, 122-126.Galtung, J. (1969). Violence, peace, and peace research. Journal of Peace Research. 6(3), 167–191.Galtung, J. (1996). Peace by peaceful means: Peace and conflict, development and civilisation. International Peace Research Insitute.Galtung, J., Jacobsen, C., & Brand-Jacobsen, K. F. (2002). Searching for peace: The road to TRANSCEND. Pluto Press. Global Compact, United Nations. (2006). What is the Global Compact? https://www.unglobal compact.org/aboutInstitute for Economics & Peace (2018, October). Positive peace report 2018: Analysing the factors that sustain peace. http://visionofhumanity.org/reportsKirbassov, G. (n.d.). Peace and sustainable development: A two-way relationship (PositionPaperand Policy Recommendations). https://sustainabledevelopment.un.org/getWSDoc.php?id=3533Leonardsson, H., & Gustav,R. (2015).The ‘local turn’ in peacebuilding: A literature review of effective and emancipatory local peace building. Third World Quarterly, 36(5), 825-839. https://doi.org/10.1080/01436597.2015.1029905Lüdeke-Freund, F. (2010) Towards a conceptual framework of ’business models for sustainability'. In R. Wever, J. Quist, A. Tukker, J. Woudstra, F. Boons, N. Beute (Eds.), Knowledge collaboration & learning for sustainable innovation. Academic Press.Mac Ginty, R. (2012). International peacebuilding and local resistance: Hybrid forms of peace. Palgrave MacMillan. https://doi.org/10.1057/9780230307Martinez-Soliman, M. (2017) Sustainable Development and Sustaining Peace, UNDP, Bureau for Policy and Promotional Support.Mele, D. (2013). Antecedents and current situation of humanistic management. African Journal of Business Ethics, 7(2), 52-61. https:// doi.org/10.4103/1817-7417.123079Oetzel, J., Westermann-Behaylo, M., Koerber, C. et al. (2009). Business and peace: Sketching the terrain. Journal of Business Ethics, 89(4),351-373. https://doi.org/10.1007/s10551-010-0411-7Post, J. E., Preston, L. E., & Sachs, S. (2002). Redefining the corporation: Stakeholder management and organizational wealth. Stanford University Press.Saunders, M., Lewis, P., & Thornhill, A. (2019). Research methods for business students (8th ed.). Pearson Education Limited.Small-Warner, K., Abuzeinab, A., &Taki, A. (2018). A review of sustainable business models and strategic sustainable development. Journal of Business Models, 6(2). 84-89. https://doi.org/10.5278/ojs.jbm.v6i2.2470SSpreitzer, G.(2007). Giving peace a chance: Organizational leadership, empowerment, and peace. Journal of Organizational Behavior, 28(8), 1077-1095. https:// doi.org/10.1002/job.487.UN (2015) Transforming our world: the 2030 agenda for sustainable development. Resolution adopted by the General Assembly on 25 September 2015. https://www.un.org/ga/search/view_doc.aspVirji, H., Sharifi, A., Kaneko, S., &Simangan, D. (2019). The sustainability–peace nexus in the context of global change. Sustain Science, 14(6), 1467–1468. https://doi.org/10.1007/ s11625-019-00737-1Von Kimakowitz, E., Spitzeck, H., Pirson, M., Dierksmeier, C., Amann, W. (Eds.) (2011). Humanistic management in practice. Palgrave Macmillan.Walsh, J. P. (2005). Book review essay: Taking stock of stakeholder management. Academy of Management Review, 30(2), 426–452.World Commission on Environment and Development / Brundtland Commission (1987). Report of the World Commission on Environment and Development: Our common future. Oxford University Press.Yin, R. (2009). Case study research: design and methods (4th ed.). Sage Publications.

Работа посвящена обобщению результатов исследования анодирования алюминида титана (γ-TiAl) во фторсодержащих электролитах. Установлены оптимальные условия анодирования, приводящие к формированию самоорганизованных нанопористых анодных оксидных пленок (АОП) на поверхности образцов, сплава Ti-40 wt. % Al. Показано, что при оптимальных условиях образуются рентгеноаморфные оксидные пленки гетерогенного состава (Al2O3:TiO2 @ 1:1) с размерами пор в диапазоне от 40 до 80 nm. Полученные результаты свидетельствуют о перспективности применения анодного наноструктурирования порошков Ti-40 wt. % Al для получения фотокаталитически активных материалов с расширенным до видимого света спектральным диапазоном поглощения. ЛИТЕРАТУРА Wang Y., Ma X., Li H., Yin S., Sato T. Advanced Catalytic materials - Photocatalysis and Other Current Trends, 2016, vol. 12, pp. 337–357. https://doi.org/10.5772/61864 Hashimoto K., Irie H., Fujishima A. Japanese Journal of Applied Physics, 2005, vol. 44, no. 12, pp. 8269–8285. https://doi.org/10.1143/jjap.44.8269 Uddin Md.T., Engg M. Sc. Dr. Rer. Nat. Technical University of Darmstadt, 2014, 222 p. URL: https://d-nb.info/1061050335/04 (accessed 28.11.2018) Batzill M. Energy Environ. Sci., 2011, vol. 4, pp. 3275–3286. https://doi.org/10.1039/c1ee01577j Marschall R. Funct. Mater., 2014. vol. 24. pp. 2421–2440. https://doi.org/10.1002/adfm.201303214 Ghicov A., Schmuki P. Commun., 2009, pp. 2791–2808. https://doi.org/10.1039/b822726h Li F., Zhao Y., Hao Y., Wang X., Liu R., Zhao D., Chen D. Journal of Hazardous Materials, 2012, vol. 239–240. pp. 118–127. https://doi.org/10.1016/j.jhazmat.2012.08.016 Morris S. M., Horton J. A., Jaroniec M. Mesopor. Mater., 2010, vol. 128, pp. 180–186. https://doi.org/10.1016/j.micromeso.2009.08.018 Ahmed M. A., Abdel-Messih M. F. Journal of Alloys and Compounds, 2011, vol. 509, pp. 2154–2159. https://doi.org/10.1016/j.jallcom.2010.10.172 Pakmehr M., Nourmohammadi A., Ghashang M., Saffar-Teluri A. Journal of Particle Science and Technology, 2015, pp. 31–38. https://doi.org/22104/JPST.2015.76 Pei J., Ma W., Li R., Li Y., Du H. Journal of Chemistry, 2015, pp. 1–7. https://doi.org/10.1155/2015/806568 Il'in, A. A., Kolachev, B. A., Pol'kin, I. S. Titanovye splavy. sostav, struktura, svoistva [Titanium alloys. Composition, structure, properties]. Moscow, VILS-MATI Publ., 2009, 520 p. (in Russ.) Tsuchiya, H., Berger, S., Macak, J.M., Ghicov, A., Schmuki, P. Comm., 2007, vol. 9, pp. 2397–2402. https://doi.org/10.1016/j.elecom.2007.07.013 Berger, S., Tsuchiya, H., Schmuki, P. Mater., 2008, vol. 20, pp. 3245–3247. https://doi.org/10.1021/cm8004024 Stepanova K. V., Yakovleva N. M., Kokatev A. N., Pettersson Kh. zap. PetrGU. Seriya Estestvennye i tekhnicheskie nauki, 2015, vol. 147, no. 2, pp. 81–86. (in Russ.) Stepanova К. V., Yakovleva N. M., Kokatev А. N., Pettersson H. Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques, 2016, vol. 10, no. 5, pp. 933– https://doi.org/10.1134/S102745101605013X Stepanova K. V. Diss. kand. tekh. nauk. Petrozavodsk, 2016, 162 p. (in Russ.) Yakovleva N. M., Kokatev A. N., Chupakhina E. A., Stepanova K. V., Yakovlev A. N., Vasil'ev S. G., Shul'ga A. M. Condensed Matter and Interphases, 2016, vol. 18, no. 1, pp. 6− URL: http://www.kcmf.vsu.ru/resources/t_18_1_2016_001.pdf (in Russ.) Kokatev A. N. Diss. kand. tekh. nauk. Petrozavodsk, 2013, 170 p. Savchenko O. I., Yakovleva N. M., Yakovlev A. N., Kokatev A. N., Pettersson Kh. Condensed Matter and Interphases, 2012, vol. 14, no. 2, pp. 243–249. URL: http://www.kcmf.vsu.ru/resources/t_14_2_2012_018.pdf (in Russ.) Canulescu S., Rechendorff K., Borca C.N., Jones N.C., Bordo K., Schou J., Pleth Nielsen L., Hoffmann S. V., Ambat R. Applied Physics Letters, 2014, vol. 104, pp. 121910(1–4). https://doi.org/10.1063/1.4866901 Chen C., Liu J., Liu P., Yu B. Advances in Chemical Engineering and Science, 2011, vol. 1, pp. 9– https://doi.org/10.4236/aces.2011.11002 Rashed M. N., El-Amin A. A. International Journal of Physical Sciences, 2007, vol. 2 (3), pp. 073–081. URL: http://www.academicjournals.org/IJPS (accessed 28.11.2018) Ivanov V. M., Tsepkov M. G., Figurovskaya V. N. Vestnik Moskovskogo universiteta. Seriya 2: Khimiya [Moscow University Chemistry Bulletin], 2010, vol. 65, 6, pp. 370-373. https://link.springer.com/article/10.3103%2FS0027131410060076 Scuderi V., Impellizzeri G., Romano L., Scuderi M., Nicotra G., Bergum K., Irrera A., Svensson B.G., Privitera V. Nanoscale Research Letters, 2014, vol. 9, pp. 458–464. https://doi.org/10.1186/1556-276x-9-458 AbdElmoula M. Dr. Philosophy. Boston, 2011, 275 р. Lee K., Mazare A., Schmuki P. Rev., 2014, vol. 114, pp. 9385–9454. https://doi.org/10.1021/cr500061m Leyens C., Peters M. Titanium and Titanium Alloys. Fundamentals and Applications. Weinheim: WILEY-VCH Verlag GmbH & Co. KGaA, 2003, 532 p.

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

Fluctuations in supply and demand result in wasted energy during off-peak electric grid hours, with Reversible Solid Oxide Cells (RSOCs) potentially providing an efficient means by which such energy can be stored to create a highly sustainable grid.1 A RSOC can catalyze reactions such as the CO2 Reduction Reaction (CO2RR) by operating in the Solid Oxide Electrolysis Cell (SOEC) mode when energy supply is high, or in the Solid Oxide Fuel Cell (SOFC) mode when demand is high while oxidizing CO.1 The estimated yearly energy storage requirement is about 2-3 months per year, with RSOCs capable of achieving this goal.1 Single phase perovskite materials with the composition La0.3M0.7Fe0.7Cr0.3O3-δ (M = Sr, Ca) (LMFCr) have emerged as promising electrocatalysts for both fuel and oxygen electrodes in symmetrical RSOCs due to their phase stability in air and fuels (pO2 ~ 0.21 – 10-21 atm) and their compatibility with doped ceria-buffered yttria- and scandia-stabilized zirconia (YSZ/SSZ) electrolytes.2,3 The Ca analogue of LMFCr (LCFCr) has generally shown better performance and compatibility with other cell components,3 with significant efforts directed towards further enhancing its CO2RR activity by employing various approaches, including nanoscale modifications.4 One such technique is nanoparticle (NP) exsolution, which can greatly increase the catalytic surface area.5 This method employs B-site doping with Ni or Co followed by exposure to reducing conditions to decorate the catalyst surface with B-site metal alloy NPs.4 These are strongly anchored to the bulk material, highly resistant to coking, and stable under the harsh conditions of RSOCs.4 In our initial work, the exsolution characteristics of Fe-Ni NPs from 5% Ni-doped LCFCr (LCFCrN) were studied in H2:N2 and CO2:CO atmospheres using ex situ XRD, SEM, and STEM-EDS.4 Exsolution kinetics were rapid in H2:N2 (pO2 ~ 10-23 atm) at 800 °C with NPs assuming an average size of 45 nm and an Fe-rich Fe0.64Ni0.36 composition within 1 h exposure to 5H2:95N2. On the other hand, 70CO:30CO2 atmospheres (pO2 ~ 10-20 atm) gave sluggish kinetics with the NPs achieving an average size of 40 nm and a Ni-rich FeNi3 composition even after more than 25 hours of treatment. This suggests stability to coarsening in highly reducing atmospheres.4 In more recent work, 5% Co-doped LCFCr (LCFCrCo) perovskites show visible Fe-Co NP formation at 800 °C upon exposure to 5H2:95N2 for at least 1 h or to 70CO:30CO2 for at least 5 h. Electrochemical characterization of Fe-Ni NP decorated LCFCrN (Fe-Ni@LCFCrN) was conducted on 2.5 cm diameter cells using ceria-buffered SSZ electrolyte. A LCFCrN ink was screen-printed onto a ~0.5 cm2 area on both sides of the cell followed by sintering at 1100 °C for 2 h. Au was painted onto each electrode, and the cell was sintered again at 825 °C for 1 h. Electrical connections were made via Au gauzes and wires. NP exsolution was induced by exposing the fuel electrode to 5H2:95N2 for 2 h at 800 °C. Various CO2:CO mixtures (100:0, 90:10, 70:30, 50:50) were supplied to the fuel electrode while air was supplied to the oxygen electrode with flow rates of 50 mL/min. Electrochemical performance was tested via cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. CVs showed that the NPs enhanced LCFCrN activity for CO2RR (~ 15%) and more notably for CO oxidation (~ 75%) at the same overpotential (~ 0.7 V), making the catalyst equally active for the two reactions. 15-minute potentiostatic tests indicated stable current densities of about –0.65, –0.634, and –0.618 A/cm2 in 100% CO2, 90CO2:10CO, and 70CO2:30CO respectively at a cell potential of 1.6 V. Medium-term (10 h) potentiostatic tests for CO2RR indicated excellent stability with a current density of –0.28 A/cm2 at a cell potential of 1.3 V in 70CO2:30CO (pO2 ~ 10-18 atm). The excellent electrochemical performance in both the SOFC and SOEC modes makes Fe-Ni@LCFCrN a very promising electrode material for RSOCs. Further work on LCFCrCo is underway, with comparisons being made between LCFCrN and LCFCrCo on CO2-CO electrocatalysis and NP characteristics. References Jensen, S. H.; Graves, C.; Mogensen, M.; Wendel, C.; Braun, R.; Hughes, G.; Gao, Z.; Barnett, S. A. Energy Environ. Sci. 8, 2471 (2015). Molero-Sánchez, B.; Addo, P.; Buyukaksoy, A.; Paulson, S.; Birss, V. I. Faraday Discuss. 182, 159 (2015). Molero-Sánchez, B.; Prado-Gonjal, J.; Avila-Brande, D.; Chen, M.; Moran, E.; Birss, V. I. J. Hydrog. Energy. 40, 1902 (2015). Ansari, H. M.; Bass, A. S.; Ahmad, N.; Birss, V. I. Mater. Chem. A (2022). Zhu, Y.; Dai, J.; Zhou, W.; Zhong, Y.; Wang, H.; Shao, Z. Mater. Chem. A. 6, 13582 (2018).

Sodium metal is a promising anode for batteries because of its high theoretical specific capacity (1165 mAh g-1) and great abundance and low cost. However, fundamental issues such as dendrite formation, “dead sodium” accumulation during cycling, fast SEI dissolution or continuous SEI growth bring challenges for stabilizing reversibility of sodium metal anode. Recent advances in electrolyte engineering and development of highly stable cathode materials have enables sodium metal batteries reaching high CE (>99 %) at room temperature1-5. Herein, we report a feasible pathway toward further stabilization of sodium metal anode using tetraglyme solvent (TEGDME) based electrolyte with various sodium salts (NaBF4, NaPF6, NaTFSI, NaFSI, NaClO4, NaOTf). It is demonstrated that a Na||Cu cell exhibited an average Coulombic efficiency of 99.9 % over 200, 850, and 1000 plating-stripping cycles when an electrolyte of 1M NaOTf in TEGDME, 1M NaPF6 in TEGDME, and 1M NaBF4 in TEGDME were used, respectively. Furthermore, 1M NaBF4 in TEGDME electrolyte also enabled excellent cycling stability of Na||Na3V2(PO4)2 batteries at high rate (1 C) for 1000 cycles with capacity retention of 90.8 %. References Seh, Z. W.; Sun, J.; Sun, Y.; Cui, Y. A Highly Reversible Room Temperature Sodium Metal Anode. ACS Cent. Sci. 2015, 1, 449−455. Cao, R.; Mishra, K.; Li, X.; Qian, J.; Engelhard, M. H.; Bowden, M. E.; Han, K. S.; Mueller, K. T.; Henderson, W. A.; Zhang, J.-G. Enabling Room Temperature Sodium Metal Batteries. Nano Energy 2016, 30, 825−830. Zheng, J.; Chen, S.; Zhao, W.; Song, J.; Engelhard, M.H.; Zhang, J.G. Extremely Stable Sodium Metal Batteries Enabled By Localized High-Concentration Electrolytes, ACS. Energy. Lett. 2018, 315−321. Goktas, M.; Bolli, C.; Buchkheim, J.; Berg, E. J; Novak, P.; Bonilla, F.; Rojo, T.; Komaba, S.; Kubota, K.; Adelhem, P.; Stable and Unstable Diglyme-Based Electrolytes for Batteries With Sodium or Graphite as Electrode., ACS Appl. Mater. Interfaces 2019, 11, 32844-32855. Le, P.M.L; Vo, D.T; Pan, H., Yan, J.; He, Y.; Cao, X.; Nguyen, H.V; Engelhard, M.H; Wang, C.; Xiao, J.; Zhang, J-G., Excellent Cycling Stability of Sodium Anode Enabled by a Stable Solid Electrolyte Interphase Formed in Ether-Based Electrolytes, Adv. Funct. Mater. 2020, 30, 2001151 Acknowledgement This work is supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies of the US Department of Energy (DOE) through the Advanced Battery Materials Research (BMR) program under contract no. DE-AC05-76RLO1830.

Electrokinetic phenomena within complex structures are relevant in microfluidics. For example, ion concentration polarization is used for electrokinetic trapping for enhanced biosensing using molecular probes1. Concentration polarization near ion-selective membranes also plays an important role in separation systems for desalination2. Aside from microfluidics, electrochemical growth-dissolution phenomenon has been reported in lithium ion battery systems where lithium plating and subsequent growth of dendrites can exacerbate the loss of cyclable lithium through the formation of isolated Lithium (i-Li) islands3. Initially thought to be “dead”, these islands were shown to migrate from one electrode to the other through a deposition-dissolution mechanism3. We present a mathematical solution for the growth and migration of an electrochemically active metal particle in a background current. A broad range of phenomena such as viscous fingering4, diffusion-limited aggregation4 and electrochemical deposition5 follow Laplacian growth and have been traditionally described using conformal map-dynamics in two dimensions. Some non-Laplacian phenomena like electrochemical transport6,7 and advection-diffusion-limited aggregation6 fall into the conformally invariant category8 and can still be simplified using conformal-mapping techniques. Our solution applies conformal mapping to the non-Laplacian growth of the metal particle to evaluate the role of particle morphology in the evolution of the phase boundary. In addition to migration, dissolution-deposition was found to lead to formation of cusps on the phase boundary under certain conditions. The solution is applicable for a general class of problems with a reactive post or particle in an applied background flux. Analytical solutions such as the one presented here are expected to augment numerical simulations and lead to expressions that capture conditions for the onset of morphological instabilities. References S. Park, B. Sabbagh, R. Abu-Rjal, and G. Yossifon, Lab Chip, 22, 814–825 (2022) https://pubs.rsc.org/en/content/articlehtml/2022/lc/d1lc00864a. D. Deng et al., Desalination, 357, 77–83 (2015). F. Liu et al., Nature 2021 600:7890, 600, 659–663 (2021) https://www.nature.com/articles/s41586-021-04168-w. J. Mathiesen, I. Procaccia, H. L. Swinney, and M. Thrasher, Europhys Lett, 76, 257 (2006) https://iopscience.iop.org/article/10.1209/epl/i2006-10246-x. D. A. Kessler, J. Koplik, and H. Levine, http://dx.doi.org/10.1080/00018738800101379, 37, 255–339 (2006) https://www.tandfonline.com/doi/abs/10.1080/00018738800101379. M. Z. Bazant, J. Choi, and B. Davidovitch, Phys Rev Lett, 91, 045503 (2003) https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.91.045503. Z. Gu et al., Phys Rev Fluids, 7, 033701 (2022) https://journals.aps.org/prfluids/abstract/10.1103/PhysRevFluids.7.033701. M. Z. Bazant, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 460, 1433–1452 (2004) https://royalsocietypublishing.org/doi/10.1098/rspa.2003.1218.

Based on the data of daily maximum temperature in 26 meteorological stations in the North Center Region, Vietnam over the period of 1980 to 2013, the authors conducted the research on the spatial distribution of the number of hot days. The initial result shows that in general, in the north of the study area, the large number of hot days occurred in the plain, and tended to decrease westward and eastward. In the south, this number tends to increase from the west to the east. Especially, the largest number occurred in two areas: The Ma and Ca River's valleys (Thanh Hoa and Nghe An provinces) and the coastal areas (Thua Thien Hue province), creating two heat centers in Tuong Duong district, Nghe An province and Nam Dong district, Thua Thien Hue province.ReferencesAdina-Eliza Croitoru, Adrian Piticar, Antoniu-Flavius Ciupertea, Cristina FlorinaRosca, 2016 Changes in heat wave indices in Romania over the period 1961-2015. Global and Plantary Change 146. Journal homepage: www. Elsevier.com/locate/gloplacha.Chu Thi Thu Huong et al., 2010. Variations and trends in hot event in Vietnam from 1961-2007, VNU Journal of Science and Technology, 26(3S).Climate Council, 2014a. Angry Summer 2013/2014. Accessed at http://www.climatecouncil.org.au/ angry-summer.Climate Council, 2014b. Angry Summer 2013/2014. Accessed at http://www.climatecouncil.org.au/ angry-summer.CSIRO and BoM, 2012. State of the Climate 2012.CSIRO and Bureau of Meteorology, Melbourne.Accessed at http://www.csiro.au/Outcomes/ Climate/Understanding/State-of-the-Climate-2012.aspx.D'Ippoliti D., Michelozzi P., Marino C., De'Donato F., Menne B., Katsouyanni K., Kirchmayer U., Analitis A., Medina-Ramon M., Paldy A., Atkinson R., Kovats S., Bisanti L., Schneider A., Lefranc A., Iñiguez C., Perucci C., 2010. The impact of heat waves on mortality in 9 European cities: results from the EuroHEAT project. Environ. Health 9, 37. http://dx.doi.org/10.1186/1476-069X-9-37.Gerald A. Meehl, 1992. Effect of tropical topography on global climate, Ann. Rev. Earth Planet. Sci., 20, 85-112.Hayhoe K., Cayan D., Field C.B., Frumhoff P.C., Maurer E.P., Miller N.L., Moser S.C., Schneider S.H., Cahill K.N., Cleland E.E., Dale L., Drapek R., Hanemann R.M., lkstein L.S., Lenihan J., Lunch C.K., Neilson R.P., Sheridan S.C., Verville J.H., 2004. Emissions pathways, climate change, and impacts on California. PNAS, 101(34), 12422-12427.Ho Thi Minh Ha, Phan Van Tan, 2009. Trends and variations of extreme temperature in Vietnam in the period from 1961 to 2007, VNU Journal of Science and Technology, 25(3S).IPCC, 2007: Climate Change 2007: Synthesis Report. Contribution of Working Groups I, II and III to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change [Core Writing Team, Pachauri R.K and Reisinger A. (eds.)]. IPCC, Geneva, Switzerland, 104p.IPCC, 2014. Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change [Core Writing Team, R.K. Pachauri and L.A. Meyer (eds.)]. IPCC, Geneva, Switzerland, 151p.Liu G., Zhang L., He B., Jin X., Zhang Q., Razafindrabe B., You H., 2015. Temporal changes in extreme high temperature, heat waves and relevant disasters in Nanjing metropolitan region, China. Nat. Hazards, 76, 1415–1430. http://dx.doi.org/10.1007/s11069-014-1556-y.Manton M.J et al., 2001. Trends in extreme daily temperature in Southeast Asia Rainfall ad and the South Pacific, J. Climatol. 21.Nairn J.R., Fawcett R.J.B., 2015. Int. J. Environ. Res. Public Health 12, 227–253. http://dx.doi.org/10.3390/ijerph120100227.Nguyen Duc Ngu, 2009. Climate Change Challenges to development, Journal of Economy and Environment, No. 1.Perkins S.E., Alexander L.V., 2013. On the measurement of heat waves. J. Clim. 26, 4500–4517. http://dx.doi.org/10.1175/JCLI-D-12-00383.1.Peterson T.C., Heim Jr. R.R., Hirsch R., Kaiser D.P., Brooks H., Diffenbaugh N.S., Dole R.M., Giovannettone J.P., Guirguis K., Karl T.R., Katz R.W., Kunkel K., Lettenmaier D., McCabe G.J., Paciorek C.J., Ryberg K.R., Schubert S., Silva V.B.S., Stewart B.C., Vecchia A.V., Villarini G., Vose R.S., Walsh J., Wehner M., Wolock D., Wolter K., Woodhouse C.A., Wuebbles D., 2013. Monitoring and understanding changes in heat waves, cold waves, floods, and droughts in the United States: state of knowledge. Bull. Amer. Meteor. Soc., 94, 821–834.Pham Thi Ly, Hoang Luu Thu Thuy, 2015. Variation of heat waves in the North Central Region over the period of 1980-2013, Journal of natural resources and environment, 9, 81-89.Phan Van Tan et al., 2010. Study impact of global climate change on extreme weather phenomena and factors in Vietnam, prediction and adaptation strategies. Project final report, KC 08.29/06-10, Hanoi University of Science.Spinoni J., Lakatos M., Szentimrey T., Bihari Z., Szalai S., Vogt J., Antofie T., 2015. Heat and cold waves trends in Carpathian Region from 1961 to 2010. Int. J. Climatol, 35, 4197–4209. http://dx.doi.org/10.1002/joc.4279.Toreti A., Desiato F., 2008.Temperature trends over Italy from 1961 to 2004, Theor. Appl. Climatol 91.Tran Cong Minh, 2007. Principle of meteorology and climate, Book, Public House of Hanoi National University.Tran Quang Duc, Trinh Lan Phuong, 2013. Changes of Hot day and Fohn Activities at Ha Tinh- Central Vietnam, VNU Journal of Science, Science and Technology, 29(2S).Trewin B., Smalley R., 2013.Changes in extreme temperature in Australia, 1910 to 2011. In: 19th AMOS National Conference, Melbourne, 11-13.Unal Y.S., Tan E., Mentes S.S., 2013. Summer heat waves over western Turkey between 1965 and 2006.Theor. Appl. Climatol, 112, 339–350. http://dx.doi.org/10.1007/s00704-012-0704-0.Will Steffen, 2015. Quantifying the impact of climate change on extreme heat in Australia. Published by the Climate Council of Australia Limited. ISBN: 978-0-9942453-1-1 (print) 978-0-9942453-0-4 (web).

Setiap kota tumbuh dan berkembang sesuai dengan potensi dan dinamika yang ada di dalamnya. Agar perkembangan kota tersebut dapat terarah dan teratur diperlukan suatu pedoman bagi kegiatan pembangunan dan pemanfaatan ruang. Pedoman bagi kegiatan pembangunan dan pemanfaatan ruang kota tersebut adalah Rencana Tata Ruang Wilayah Kota (RTRW) serta peraturan yang terkait dengan aktivitas pemanfaatan ruangnya.Dalam RTRW Kota Pontianak, masing-masing wilayah merupakan bagian wilayah kota yang menjadi fokus perencanaan. Perkembangan wilayah akan membawa pengaruh terhadap pemanfaatan ruang yang ada. Hal ini dapat dilihat dari beberapa fenomena yang terjadi, yaitu adanya penyimpangan terhadap pemanfaatan ruang yang sudah ditetapkan dalam rencana tata ruang. Kondisi ini dapat dilihat dengan mudah pada ruas-ruas jalan utama yang menjadi cerminan wajah Kota Pontianak. Pada ruas jalan utama masih banyak terdapat bangunan yang berdiri tidak sesuai dengan aturan rencana tata ruang dan tata bangunan yang ada. Akibat lebih jauh dari kondisi ini adalah penataan bangunan sebagai inti fisik kota terkesan kurang teratur dan berkembang tidak sesuai harapan.Tujuan penelitian ini adalah melakukan identifikasi terhadap pemanfaatan ruang bagi aktivitas mendirikan bangunan di sepanjang koridor Jalan Kom Yos Sudarso Pontianak yang merupakan salah satu jalan utama di Kota Pontianak untuk melihat kesesuaiannya dengan peraturan tata ruang dan bangunan yang berlaku khususnya peraturan yang berkaitan dengan perencanaan RMJ dan GSB pada kawasan tersebut.Penelitian ini menggunakan desain riset deskriftif dengan survei sebagai instrumen penelitian, yaitu dengan melakukan obsevasi dan pengamatan langsung dilapangan untuk memperoleh data primer berkaitan dengan jumlah dan karakteristik bangunan di sepanjang koridor Jalan Kom Yos Sudarso Pontianak. Analisis yang digunakan adalah analisis deskriftif untuk melihat frekuensi dan pola sebaran data yang dimati. Dari analisis tersebut maka dapat diketahui gambaran tentang frekuensi, kecenderungan serta pola sebaran aktivitas mendirikan bangunan di sepanjang koridor jalan Kom Yos Sudarso Pontianakterhadap penerapan peraturan tata ruang dan bangunan pada wilayah penelitian.Hasil identifikasi didapat 216 unit bangunan atau 17,2 % terkena perencanaan RMJ dan sebagian besar adalah bangunan dengan fungsi usaha. Sementara itu, bangunan yang tidak sesuai dengan penataan GSB pada wilayah penelitian ini sebesar 825 unit bangunan atau mencapai 65,6 % dari seluruh bangunan yang diamati. Fungsi bangunan yang paling banyak melanggar aturan penataan GSB adalah bangunan dengan fungsi usaha serta bangunan yang berfungsi sebagai hunian dan usaha yang mencapai 41,9 % dan 14,3 % dari total bangunan yang di amati.Kata-Kata Kunci: Pemanfaatan Ruang, Aktivitas Mendirikan Bangunan, Koridor JalanIDENTIFICATION ON THE ACTIVITIES OF BUILDING CONSTRUCTION WITH REGARD TO SPATIAL USE AT KOM YOS SUDARSO’S STREET CORRIDORS PONTIANAKEvery city grows and develops according to the potential and dynamics the city has in itself. For the development of the city to be orderly and well directed, a guideline is needed for development activities and spatial utilization. Such a guideline for the development and utilization of urban space is known as Urban Spatial Plans (RTRW) as well as regulations related to the activities of spatial utilization. In the RTRW of Pontianak City, each region is a part of the city that becomes the focus of planning. The development of a region will obviously affect the utilization of existing space. This can be seen from several phenomena that occur, namely deviation against space utilization that has been defined in the spatial plan. This condition can easily be seen on the sections of main roads that constitute as reflection of the face of Pontianak City. On the main road, sections there are still found many buildings that are not in accordance with the existing spatial plan and building layout. A further consequence of such a condition is that the arrangement of buildings as the physical core of the city seems to be less organized and develops not as it had been expected to be.The purpose of this study is to identify the use of space for the activity of building constructions along the corridor of Kom Yos Sudarso Pontianak street which is one of the main roads in Pontianak City and to see if they are in compliance with the existing spatial and building regulations, particularly the regulations relating to the RMJ plans (Street Owned Space) and GSB (Building Border Line) on the area in question. This research uses descriptive research design with a survey as its main research instrument by conducting observation and direct field observation to get the primary data related to the numbers and characteristics of the buildings along the corridor of Kom Yos Sudarso Street, Pontianak. The analysis used is descriptive analysis to see the frequency and pattern of data distribution being observed. From the analysis, it could be seen that the description of the frequency, tendency and patterns of building activity distribution along the corridor of Kom Yos Sudarso Street Pontianak with regard to the implementation of spatial and building regulations in the researched area.Identification results obtained 216 building units or 17.2% exposed to planning RMJ and as large is a building with business functions. Meanwhile, buildings that are inconsistent with the GSB structuring in this research area are 825 units of buildings or 65.6% of all buildings observed. Building functions that most violate GSB structuring rules are buildings with business functions as well as buildings that serve as occupancy and businesses that reach 41.9% and 14.3% of the total buildings observed.Keywords: Space Utilization, Building Activity, Road CorridorREFERENCESIrawati, H.,Haryanto, R. (2015). Perubahan Fungsi Lahan Koridor Jalan Selokan Mataram Kabupaten Sleman. Jurnal Teknik PWK Vol. 4 No. 2 (2015)Kementerian Hukum dan HAM RI. (2007). Undang - Undang Nomor 26 Tahun 2007 Tentang Penataan Ruang. Kementerian Hukum dan HAM RI. JakartaKementerian Hukum dan HAM RI. (2002). Undang – Undang Nomor 28 Tahun 2002 Tentang Bangunan GedungKementerian Pekerjaan Umum RI. (2007). Peraturan Menteri Pekerjaan Umum Nomor: 06/PRT/M/2007 Tanggal 16 Maret 2007 Tentang Pedoman Umum Rencana Tata Bangunan Dan Lingkungan. Kementerian Pekerjaan Umum RI. JakartaNurmandi, A. (1999), Manajemen Perkotaan. Lingkaran Bangsa. YogyakartaSekretariat Daerah Kota Pontianak. (2008). Peraturan Daerah Kota Pontianak No. 3 Tahun 2008 tentang Bangunan Gedung. Sekretariat Daerah Kota Pontianak. PontianakSekretariat Daerah Kota Pontianak. (2013). Peraturan Daerah Kota Pontianak No. 2 Tahun 2013 tentang RTRW Kota Pontianak. Sekretariat Daerah Kota Pontianak. PontianakWardhana, I, W., Haryanto, R. (2016). Kajian Pemanfaatan Ruang Kegiatan Komersial Koridor Jalan Taman Siswa Kota Semarang . Jurnal Pengembangan Kota Volume 4 No. 1 : 49–57 (2016)Yahya, M. (2015). Kajian Tata Bangunan dan Lingkungan pada Koridor Jalan Perintis Kemerdekaan Kota Makassar. Prosiding Temu Ilmiah IPLBI 2015. B.033-B.038

Abstract Cotton, being a leading commercial fibre crop, is grown on 20.5 million hectares in three major cotton-producing countries: China, India and Pakistan. Wide differences in yield per hectare exist among these countries and these are being aggravated by changing climate conditions, i.e. higher temperatures and significant seasonal and regional fluctuation in rainfall. Pakistan is one of the countries most affected by climate change. The disastrous effects of extreme periods of heat stress in cotton were very prominent in Pakistan during the growing seasons 2013-2014 (40-50% fruit abortion) and 2016-2017 (33% shortfall), which posed an alarming threat to the cotton-based economy of Pakistan. Poor resilience of the most commonly grown cotton varieties against extreme periods of heat stress are considered to be major factors for this drastic downfall in cotton production in Pakistan. Using the approach of induced mutation breeding, the Nuclear Institute for Agriculture and Biology (NIAB), Faisalabad, Pakistan, has demonstrated its capabilities in developing cotton mutants that can tolerate the changed climatic conditions and sustain high yields under contrasting environments. The results of studies on the phenological and physiological traits conferring heat tolerance are presented here for thermo-tolerant cotton mutants (NIAB-878, NIAB-545, NIAB-1048, NIAB-444, NIAB-1089, NIAB-1064, NIAB-1042) relative to FH-142 and FH-Lalazar. NIAB-878 excelled in heat tolerance by maintaining the highest anther dehiscence (82%) and minimum cell injury percentage (39%) along with maximum stomatal conductance (27.7 mmol CO₂/m²/s), transpiration rate (6.89 μmol H₂O/m²/s), net photosynthetic rate (44.6 mmol CO₂/m²/s) and physiological water use efficiency (6.81 mmol CO₂/μmol H₂O) under the prevailing high temperatures.

INTRODUCCION La Patología Dual (PD) en el consumo de alcohol condiciona el pronóstico, adherencia y retención en la intervención ambulatoria. OBJETIVOS Conocer prevalencia de patología dual. Determina tasas de adherencia a consulta y tratamiento. Analizar correlación PD cumplimiento y efectividad terapéutica. METODO Estudio descriptivo observacional longitudinal. Referencia muestral: 77 pacientes con TUA de 472 incluidos en Plan de Microeliminación del VHC de San Miguel Adicciones (2017 a 2020). Variables de estudio: sociodemográficas, clínicas y de consumo e indicadores de cumplimiento y retención. RESULTADOS Muestra: 62% hombres y 38% mujeres (34 y 70 años). 52% Patología Dual (69%M; 42%H). Patologías psiquiátricas: 22% trastorno depresivo (53%H;47%M), 7% ansiedad (60%H;40%M), 8% síndrome ansioso depresivo (34%H;66%M). Tentativas autolíticas 16%, (42%H;58%M), 7% más de un trastorno psiquiátrico. Acuden por Iniciativa Propia 49%, derivación MAP (25%), Especializada 9%. La retención es superior en los pacientes que no tienen PD (>12 meses). Menor índice de retención en pacientes con trastorno psiquiátrico 40%. Trastorno Depresivo: 82% de adherencia a consulta (AC), 47% de retención (R) > 6 meses, 29% abandona (A) y 24% alta terapéutica (AT). Trastorno de Ansiedad: 20%(AC), 60% (R) >6 meses, 40% (A), 0% (AT). Trastorno Ansioso-Depresivo: 10% (AC), 67%(R) > 6 meses, 50% (A) y 33% (AT). CONCLUSIONES Predominio de trastornos afectivos: depresión, ansiedad. Diferencia en el factor género en TUA y PD. Prevalencia de más de un Trastorno Mental superior en mujeres. Escasa derivación desde los Servicios Especializados. La concurrencia PD-TUA incide de manera desfavorable en pronóstico, evolución y efectividad terapéutica. References 1. Corrêa Filho JM, Baltieri DA. Psychosocial and clinical predictors of retention in outpatient alcoholism treatment. Braz J Psychiatry. 2012 -12;34(4):413-21. 2. Graff FS, Morgan TJ, Epstein EE, McCrady BS, Cook SM, Jensen NK, et al. Engagement and retention in outpatient alcoholism treatment for women. Am J Addict. 2009 Jul-Aug;18(4):277-88.

INTRODUCCION El pronóstico y evolución en el Trastorno por Uso de Alcohol (TUA) y Trastorno Mental (TM) está condicionada por la multifactorialidad: falta de adherencia, recaídas, y complicaciones orgánicas. OBJETIVOS Identificar patología psiquiátrica concomitante. Analizar las tasas de adherencia a consulta y tratamiento. Correlacionar patología psiquiátrica con índices de retención. METODO Estudio descriptivo observacional longitudinal. Referencia muestral: 77 pacientes con TUA de 472 incluidos en Plan de Microeliminación del VHC de San Miguel Adicciones (2017 a 2020). Variables de estudio: sociodemográficas, clínicas y de consumo e indicadores de cumplimiento y retención. RESULTADOS Muestra: 62% hombres y 38% mujeres (34 y 70 años). Inicio del consumo de alcohol entre 15 y 18 años. Presentan Patología Dual 69% mujeres y 42% hombres. 85% de pacientes con TUA presentan un solo TM concomitante (95% hombres, 80% mujeres). Patología psiquiátrica predominante: Trastorno Depresivo 22% (H:53%;M:47%), Trastorno de Ansiedad 7% (H:60%;M:40%), Trastorno Ansioso Depresivo 8% (H:34%;M:66%). Destacar la prevalencia de un 18% de mujeres con Trastorno Psicótico. El 58% de mujeres han realizado uno o más Gesto Autolítico. Acuden por Iniciativa Propia 49%, derivación MAP (25%), Especializada 9%. Trastorno Depresivo: 82% de adherencia a consulta, 47% de retención superior a 6 meses. Trastorno de Ansiedad (20%) y 60% de retención entre 6 y 12 meses. CONCLUSIONES Mujeres con TUA presentan más comorbilidad psiquiátrica. La prevalencia de más de un Trastorno Mental es superior en mujeres. El Trastorno Depresivo es el de mayor incidencia con TUA. Escasa derivación desde los Servicios Especializados. References 1. Corrêa Filho JM, Baltieri DA. Psychosocial and clinical predictors of retention in outpatient alcoholism treatment. Braz J Psychiatry. 2012 -12;34(4):413-21. 2. Graff FS, Morgan TJ, Epstein EE, McCrady BS, Cook SM, Jensen NK, et al. Engagement and retention in outpatient alcoholism treatment for women. Am J Addict. 2009 Jul-Aug;18(4):277-88.

Abstract With atmospheric methane concentrations rising, spurring increased social concern, there is a renewed focus in the oil and gas industry on methane emission monitoring and control. In 2019, a methane emission survey at a bp asset west of Shetland was conducted using a closed-cavity methane spectrometer mounted onboard a long-endurance fixed-wing unmanned aerial vehicle (UAV). This flight represents the first methane emissions survey of an offshore facility with a miniature methane spectrometer onboard a UAV with subsequent flights performed. The campaign entailed gathering high-density methane concentration data in a cylindrical flight pattern that circumnavigated the facility in close proximity. A small laser spectrometer was modified from an open-cavity system to a closed-cavity onboard the aircraft and yielded in-flight detection limits (3s) of 1065ppb methane above background for the 2019/2020 sensor version and 150ppb for the 2021 sensor versions. Through simulation, the sensors minimum detection limits in mass flow rate were determined to be 50 kg/h for the 2019/2020 campaign and 2.5kg/h for the 2021 campaigns; translating to an obtainable measurement for 23% and 82% of assets reporting higher than 1 kg/h according to the 2019 EEMS dataset, respectively. To operationalize the approach, a simulation tool for flight planning was developed utilizing a gaussian plume model and a scaled coefficient of variation to invoke expected methane concentration fluctuations at short time intervals. The simulation is additionally used for creation of synthetic datasets to test and validate algorithm development. Two methods were developed to calculate offshore facility level emission rates from the geolocated methane concentration data acquired during the emission surveys. Furthermore, a gaussian plume simulator was developed to predict plume behavior and aid in error analysis. These methods are under evaluation, but all allow for the rapid processing (<24h) of results upon landing the aircraft. Additional flights were conducted in 2020 and 2021 with bp and several UK North Sea Operators through Net Zero Technology Centre (NZTC) funded project, resulting in a total of 18 methane emission survey flights to 11 offshore assets between 2019 and 2021. The 2019 flight, and subsequent 2020/21 flights, demonstrated the potential of the technology to derive facility level emission rates to verify industry emission performance and data.

According to the Bronfenbrenner's ecological systems theory of human development ([1][2][3][4][5]), the development of each individual cannot be observed without considering its relationship with the development of other people and, above all, with the environment in which they live. The ecological orientation of Bronfenbrenner with respect to human development is therefore based on the interest in the progressive adaptation between an active organism that grows and its immediate environment: the individual-environment interaction that is determined by the relationships existing between the different environmental situations and the individuals present in that context is fundamental. Consequently, the ecological environment that is considered relevant to development processes is not limited to a single environmental situation but includes the interconnections between multiple environmental situations and the different influences of each individual. The evolution of the Internet-based technologies has brought to the development of solutions that have profoundly changed the way we live, including education. The advent of social media and social networks represents a milestone in the history of Internet, opening up to profound reflections on the "virtualization" of relationships, their growing importance in everyday life, and their role in education. Many authors argue that the Internet and the social media should no longer be considered as a tool to connect to a virtual reality that is separate from the real world, but as a place in which users live daily ([6][9][11][10]); consequently, they constitute one of the environmental situations mentioned by Bronfenbrenner. However, the risks deriving from the use of social media have been widely discusses in the literature ([7][8][12]). Adolescents are more exposed to the social media threats, since they are unable to perceive the profoundly different dynamics that govern offline and online networks. In this paper, having in mind the Bronfenbrenner's ecological systems theory of human development, we argue that the progressive adaptation of students to social media should be considered as a process of their growth and development. Furthermore, we analyze some corrections to be introduced in the educational paths of adolescents necessary to reduce the threats deriving from the use of social media and social networks in education. Reference Text and Citations [1] Bronfenbrenner, U. (1961). Toward a theoretical model for the analysis of parent-child relationships in a social context. In J. C. Glidewell (Ed.), Parental attitudes and child behavior (pp. 90-109). Springfield, IL: Charles C. Thomas. [2] Bronfenbrenner, U. (1973). Social ecology of human development. In F. Richardson (Ed.), Brain and intelligence: The ecology of child development (pp. 113-129). Hyattsville, MD: National Education Press. [3] Bronfenbrenner, U. (1974). Developmental research, public policy, and the ecology of childhood. Child Development, 45, 1-5. https://doi.org/10.2307/1127743 [4] Bronfenbrenner, U. (1994). Ecological models of human development. In T. Husen & T. N. Postlethwaite (Eds.), International encyclopedia of education (2nd ed., Vol. 3, pp. 1643-1647). Oxford, UK: Pergamon Press and Elsevier Science. [5] Bronfenbrenner, U., & Morris, P. A. (2006). The bioecological model of human development. In W. Damon (Series Ed.) & R. M. Lerner (Vol. Ed.), Handbook of child psychology: Theoretical models of human development (pp. 793-828). New York, NY: Wiley. [6] Carr, N. (2011). The Shallows: What the Internet Is Doing to Our Brains. New York: W.W. Norton & Company. [7] Livingstone, S., Haddon, L., G?rzig, A., & ?lafsson, K. (2011). Risks and safety on the internet: The perspective of European children. Full Findings. London: EU Kids Online, LSE. [Google Scholar] [8] Martin, F., Wang, C., Petty, T., Wang, W., & Wilkins, P. (2018). Middle school students' social media use. Journal of Educational Technology & Society, 21(1), 213-224. https://www.jstor.org/stable/26273881 [9] Musetti, A., Cattivelli, R., Giacobbi, M., Zuglian, P., Ceccarini, M., Capelli, F., et al. (2016). Challenges in internet addiction disorder: is a diagnosis feasible or not? Frontiers in Psychology, 7. doi: 10.3389/fpsyg.2016.00842 [10] Musetti, A., Cattivelli, R., Zuglian, P., Terrone, G., Pozzoli, S., Capelli, F., et al. (2017). Internet addiction disorder o internet related psychopathology? [Internet Addiction disorder or Internet Related Psychopathology?]. Giornale Italiano di Psicologia, 44, 359-382. doi: 10.1421/87345 [11] Taymur, I., Budak, E., Demirci, H., Akdag, H.A., Gungor, B.B., & Ozdel, K. (2016). A study of the relationship between internet addiction, psychopathology and dysfunctional beliefs. Computers in Human Behavior,61, 532-536. https://doi.org/10.1016/j.chb.2016.03.043 [12] Willoughby, M. (2018). A review of the risks associated with children and young people's social media use and the implications for social work practice. Journal of Social Work Practice,33(2), 127-140. https://doi.org/10.1080/02650533.2018.1460587

In recent years, Europe has been moving towards a concept of inclusivity as highlighted by the sixteenth goal of the 2030 Sustainable Development Goals Agenda that promotes peaceful and inclusive societies. (UN Dept. of Global Communications, 2015). The increasing awareness of social diversity has attracted the attention of designers who started to adopt an inclusive design approach and design products or services to be usable by as many people as reasonably possible, without the need for specialised adaptions. The inclusive design approach has been largely applied in adaptive sports to improve levels of functioning and independence in daily living activities and increase physical capability, physiological capacity, social status, and sense of belonging. Adaptive sports can become a way to promote involvement as an active part of the rehabilitation exercise to stimulate neuromotor recovery, particularly in children with disabilities (Canina et al., 2020). Recent research has demonstrated that climbing could be an excellent rehabilitation tool that involves the child with disabilities in a natural way. This sport exploits the propensity to play, to sport, to compete, to stimulate the execution of specific exercises, can transform this effort into a game and multiply the effectiveness of the rehabilitation process (Reljin, V., 2019). An intensive rehabilitation from an early age guarantees the recovery of part of their neuromotor abilities. In order to achieve better results in rehabilitation, adaptive sports must adopt a holistic approach to the user considering both the physical and the psycho-perceptual aspects, i.e. the ability to do it but also the feeling of fulfilment in doing it. However, current climbing walls do not include these aspects of the adaptive sport. An adaptive climbing wall design requires identifying a methodology that could lead to a coherent and effective solution, using explicit attention for inclusiveness. The paper describes the Design for Sustainable Behaviour (DfSB) approach adopted to design an adaptive climbing wall as a tool for the rehabilitation of children with Cerebral Palsy (CP) by identifying the sustainable, inclusive requirements that consider children’s diversity. The DfSb approach, as user- and use-centred design that create preconditions for a sustainable everyday life, considers the sustainability aspects from two essential points of view. The user's sustainable behaviour, in which inclusiveness is a fundamental part of these attitudes, and the product's sustainability that uses new recycled materials create a more natural environment (similar to climbing in natural environments). Indeed, the project considers first the sustainable behavioural aspects, spreading climbing as a tool to improve the health conditions of CP children, introducing them to climbing by making it accessible and inclusive, intending to help children with different abilities to build trust and awareness of their potentialities, and a sense of accomplishment while training problem-solving and decision-making skills. As a second point of DfSB, the climbing wall and holds are designed with sustainable materials (waste material content) that provide the feeling of natural stone considering the entire product lifecycle. This paper shows how the DfSB approach can support the definition of design requirements of a training tool introducing children with CP to climbing as a natural approach to rehabilitation, making it accessible and inclusive. The project brings children with disabilities closer to the adapted sport through an indoor and democratic recreational activity. Bibliography 1. AA.VV. (2020). What is inclusive design? Inclusive Design Toolkit. University of Cambridge. Retrieved from http://www.inclusivedesigntoolkit.com/whatis/whatis.html 2. Canina M., Parise C., Bruno C. (2020). An Inclusive Design Approach for Designing an Adaptive Climbing Wall for Children with CP. 3. DesignCouncil. (2020). What is the framework for innovation? Retrieved from https://www.designcouncil.org.uk/news-opinion/what-framework-innovation-design-councils-evolved-double-diamond 4. Dixon-Fyle, S., Dolan, K., Hunt, V., Prince, S.: Diversity wins! How inclusion matters, pp. 1–12. McKinsey Co. (2020) 5. Persson, H., Åhman, H., Yngling, A. A., & Gulliksen, J. (2015). Universal design, inclusive design, accessible design, design for all: different concepts—one goal? On the concept of accessibility—historical, methodological and philosophical aspects. Universal Access in the Information Society, 14(4), 505–526. 6. Reljin, V. (2019). Effects of Adaptive Sports on Quality of Life in Individuals with Disability. Williams Honors College, Honors Research Projects., 822. 7. United Nations Department of Global Communications. (2015). Transforming our world: the 2030 Agenda for Sustainable Development.

Abstract A novel salt-bath nitrocarburizing process recently developed forms a lithium-iron compound-oxide layer on the surface of steel in concurrence with a nitride layer by adding lithium ions to the molten salt. This process has already been successfully applied to mass-produced products. However, the microstructure and its formation process of the surface layer in alloyed steels during the nitrocarburizing process have not yet been fully understood. In this study, we focus on the effect of Si and Cr, which are included in a common die steel, on the microstructure of an oxide layer of a nitrocarburized alloy. The alloys used in this study are Fe-0.4wt%C, Fe-0.4wt%C-2.0wt%Si, and Fe-0.4wt%C-2.0wt%Cr. These alloys were arc melted into button ingots under an Ar atmosphere. The ingots were annealed at 1123 K for 1.0 h, followed by air cooling and double tempering at 873 K, similar to the heat treatments employed to hot-die steels. Salt-bath nitrocarburizing was carried out at 823 K for 0.1-10 h. The microstructures of the cross-sectional surface layers of the samples were examined using an optical microscope and FE-SEM. Elemental mapping as well as phase identification of the surface layers were done by EDS, XRD, and GD-OES. In the Fe-C binary alloy, a thin continuous oxide layer of α-LiFeθ2 formed first on the outermost surface, and a thick iron nitride layer developed underneath the oxide layer, with aligned oxide particles along the grain boundaries of the nitrogen compound layer. In the case of Si addition, the outermost oxide layer became thinner and an additional oxide layer consisting of α-LiFeθ2 and (Li,Fe)3Siθ4 formed between the outer oxide layer and nitrogen compound layer, and the formation of the oxide particles in the nitrogen compound layer was fully suppressed. In the case of Cr addition, internal oxide particles formed in the nitrogen compound layer, similar to those in the binary steel, although an continuous oxide layer of CrfN,O) formed in between those layers. On the basis of these results, the inner oxide layer formed with Si addition contributes to improving the frictional wear characteristics in die steels.

This paper investigates the development of new forms of alliances between humans and technology in the context of interaction and collaboration between human and artificial intelligence (AI), with the aim to address responsible development and use of artificial intelligence-based learning tools (adaptive learning).The future of adaptive learning can make important contributions in education and improve student and teacher experiences, while raising challenges and risks that can be formulated as impacts on human life, both at the individual and societal levels. In todays’ context, adaptive learning tools are implemented to support instructors in the delivery of content and to provide learners personalised learning, without necessary involving end users throughout the design and running phases of these tools. The findings indicate there is a need to focus on human agency and pedagogy to enhance the adoption of adaptive learning. This paper investigates whether an embedded feedback system in AI based learning tools, based on participatory design, involving learners and instructors would help to overcome the risks and challenges related to the adoption of these tools. A process that involves an embedded feedback system is proposed. The approach adopted is to extend research on Cybernetics theory and other research on human-AI interactions to revise mutualistic relationship between humans and AI. The theory of cybernetics brings the idea to control entropy in a system through feedback. In other words, cybernetics is the science of feedback, information that travels from a system through its environment and back to the system (Wiener 1961). As stated by Dubberly, learning and adapting to the needs of a system are the goals of both iterative design processes and cybernetics. Thus, Cybernetics can provide a useful framework for augmenting designers in creating human-centred interactive AI-enabled products (Dubberly 2015). As these systems become more reliable and easier to work with, designers can embed them into tools-as AI subsystems-that can interact with people. This interaction can then support the AI subsystem to further learn and adapt to the user.This research will further extend with empirical studies to investigate more details on how human computer interaction design approaches can address risks and challenges associated with it and to show that there is a need to focus on human agency to enhance the design and setting up of adaptive learning, where learners, instructors and other education stakeholders need to be actively involved. The methodology used for data collection is primarily interviews conducted with different groups of AI-enabled tools practioners (data scientists, software engineers, software vendors, and leaders within organisations, EdTech professionals). Semi-structured interviews are chosen. The methodology used for data analysis is thematic analysis. This study is further supported with extensive literature reviews on research conducted on cybernetics, education technology and adaptive learning, and analysis of case-studies of organisations in the process of adoption of adaptive learning systems.Dubberly, H., Pangaro, P.: Cybernetics and design: conversations for action. Cybern. Hum. Know. 22(é-3), 73–82 (2015)Wiener, N.: Cybernetics or Control and Communication in the Animal and Machine, vol. 25. MIT Press (1961)

Reconstrucción virtual de ambientes urbanos a partir de fotografías históricas a través de Image Based Animations (IBA). La Plaza de la Virgen de Valencia alrededor de 1870. Jose Luis Cabanes Ginés¹, Federico Iborra Bernad², Carlos Bonafé Cervera3 ¹Departamento de Expresión Gráfica Arquitectónica. Universidad Politécnica de Valencia. Caminio de Vera s/n 46022 Valencia. 2Departamento de Composición Arquitectónica. Universidad Politécnica de Valencia. Caminio de Vera s/n 46022 Valencia 3Departamento de Ing. Cartográf. Geodesia y Fotogramtría. Universidad Politécnica de Valencia. Caminio de Vera s/n 46022 Valencia E-mail: jlcabane@ega.upv.es, f_iborra@yahoo.es, carboce1@topo.upv.es Keywords (3-5): virtual reconstruction, historical urban environment, image based animations Conference topics and scale: City transformations / Tools of analysis in urban morphology The recreation of the historical environment of emblematic urban spaces in our cities through interactive technologies, allows to extend their knowledge among the interested users while contributing to its assessment. When the documentary bases are photographs it is possible to carefully model the recorded elements using photogrammetry techniques based on 3D primitives, so that by means of an immersive navigation limited to certain points of view, an appearance of acceptable tridimensionality is obtained, where only isolated images of dispersed frames are available. The virtual recreation can be completed increasing its realistic appearance through its edition with animations of objects (for example, carriages) and characters, texts, musical setting, etc. The results can be presented in formats such as video or navigation through virtual reality helmets. From a selection of the first historical photographs of the Plaza de la Virgen, that we have obtained searching in several documentary sources, our multidisciplinary team is interested in a reliable, realistic and pleasant presentation of the urban environment of one of the most representative places in the city of Valencia, whose spatial configuration has changed significantly over the years. References (100 words) Braun, C., Kolbe, T. H., Lang, F., Schickler, W., Steinhage, V., Cremers, A. B., Förstner, W., Plümer, L., 1995. Models for photogrammetric building reconstruction. Computers & Graphics, Volume 19, Issue 1, pp. 109-118. Debevec, P., Taylor, C. J. and Malik, J., 1996. Modeling and rendering architecture from photographs: A hybrid geometry and image-based approach. SIGGRAPH’96, pp. 11–20. De Mesa, A., Regot, J., Nuñez, M. A. and Buill, F., (2009). Métodos y procesos para el levantamiento de reconstrucción tridimensional gráfica de elementos del patrimonio cultural. La iglesia de Sant Sever de Barcelona. Revista EGA, nº 14, pp. 82-89. Drap, P., Grussenmeyer, P. and Gaillard, G., 2001. Simple Photogrammetric Methods with ARPENTEUR: 3-D Plotting and Orthoimage generation. XVIII International Symposium CIPA 2001, Potsdam (Germany). International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, nº 34 (Part 5/C7), pp. 47-54. El-Hakim, S., Beraldin, J. and Lapointe, A., 2002. Towards Automatic Modeling of Monuments and Towers. IEEE Proceedings of the International Symposium on 3D Data Processing Visualization and Transmission, 3DPVT 2002, Padua, Italy, pp. 526-531. Proyecto Barcelona Darrera Mirada, http://darreramirada.ajuntament.barcelona.cat/#historia/8/1 The Old New York, http://vimeo.com/160024074, https://vimeo.com/162572088