Academic literature on the topic '170899 Renewable energy not elsewhere classified'

Energy storage is a key technology for many purposes and in particular for air conditioning plants and a successful exploitation of solar energy. Thermal storage devices are usually classified as either variable temperature (“sensible heat”) or constant temperature (“latent heat”) devices. For both models a basic question is to determine the efficiency suitably: Only exergy efficiency appears a proper way. The aim of this paper is to examine exergy efficiency in both variable and constant temperature systems. From a general statement of exergy efficiency by the present author, two types of actual definitions are proposed, depending on the fact that the exergy of the fluid leaving the thermal storage during the charge phase can be either totally lost or utilized elsewhere. In addition, specific remarks are made about the exergy of a system in a periodically varying temperature environment.

Photovoltaic (PV) cells have become an increasingly ubiquitous technology; however, concentrating photovoltaics (CPV), despite their higher theoretical efficiencies and lower costs, have seen much more limited adoption. Recent literature indicates that thermal management is a key challenge in CPV systems. If not addressed, it can negatively impact efficiency and reliability (lifetime). Traditional cooling methods for CPV use heat sinks, forced air convection or liquid cooling, which can induce an extremely large convection area, or parasite electric consumption. In addition, the moving parts in cooling system usually result in a shorter life time and higher expense for maintenance. Therefore, there is a need for an improved cooling technology that enables significant improvement in CPV systems. As a passive and compact cooling mechanism, radiative cooling utilizes the transparency window of the atmosphere in the long wavelength infrared. It enables direct heat exchange between objects on earth’s surface with outer space. Since radiated power is proportional to the difference of the fourth powers of the temperatures of PV and ambient, significantly greater cooling powers can be realized at high temperatures, compared with convection and conduction. These qualities make radiative cooling a promising method for thermal management of CPV. In this work, experiments show that a temperature drop of 36 degree C have been achieved by radiative cooling, which results in an increase of 0.8 V for open-circuit voltage of GaSb solar cell. The corresponding simulations also reveal the physics behind radiative cooling and give a thorough analysis of the cooling performance.

Simulations of various hydration levels of lamellar phase 23:2 Diyne PC were performed, and subsequent, serial docking simulations of a tyrosine monomer were replicated for each system in both hydrated and dehydrated states.
The goal was to evaluate how hydration impacts self-assembly and crystallization on the surface, and
whether or not these simulations, when run sequentially, could determine the answer. It was discovered that hydrated and dehydrated surfaces behave differently, and that
headgroup orientation plays a role in the initial docking and self-assembly process of the tyrosine monomer. It was also determined that potential energy as a sole metric
for determining whether or not a specific conformation of intermolecular orientation is not entirely useful, and docking scores are likely useful metrics in discriminating between conformations with identical potential energy values.

Recent developments in semiconductor device technology have seen the advent of wide-bandgap (WBG) based devices that enable operation at high switching frequencies. These devices, such as silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs), are becoming a favored choice in inverters for electric drive systems because of their lower switching losses and higher allowable operating temperature. However, the fast switching of such devices implies increased voltage edge rates (high dv/dt) that give rise to various undesirable effects including large common-mode currents, electromagnetic interference, transient overvoltages, insulation failure due to the overvoltages, and bearing failures due to

microarcs. With increased use of these devices in transportation and industrial applications, it is imperative that accurate models and efficient simulation tools, which can predict these high-frequency effects and accompanying system losses, be established. This research initially focuses on establishing an accurate wideband model of a surface-mount permanent-magnet

ac machine supplied by a WBG-based inverter. A new multirate simulation framework for predicting the transient behavior and estimating the power losses is then set forth. In this approach,

the wideband model is separated into high- and low-frequency models implemented using two different computer programs that are best suited for the respective time scales. Repetitive execution of the high-frequency model yields look-up tables for the switching losses in the semiconductors, electric machine, and interconnecting cable. These look-up tables are then incorporated into the low-frequency model that establishes the conduction

losses. This method is applied to a WBG-based electric drive comprised of a SiC inverter and permanent-magnet ac machine. Comparisons of measured and simulated transients are provided.

In this work, we have collaborated with scientists industry and academia to explain the origin of the increased cell efficiency of bulk solution-processed perovskite cells. We also explored the possibility of enhancing the efficiency of the c-Si and perovskite cells by using them in a tandem configuration. To improve the intrinsic reliability, we have investigated 2D-perovskite cells with slightly lower efficiency but longer lifetime. We interpreted the behavior of the 2D-perovskite cells using randomly stacked quantum wells in the absorber region. We studied the reliability issues of c-Si modules and correlated series resistance of the modules directly to the solder bond failure. We also found out that finger thinning of the contacts at cell level manifests as a fake shunt resistance but is distinguishable from real shunt resistance by exploring the reverse bias or efficiency vs. irradiance. Then we proposed a physics-based model to predict the energy yield and lifetime of a module that suffers from solder bond failure using real field data by considering the statistical nature of the failure at module level. This model is part of a more comprehensive model that can predict the lifetime of a module that suffers from more degradation mechanisms such as yellowing, potential induced degradation, corrosion, soiling, delamination, etc. simultaneously. This method is called forward modeling since we start from environmental data and initial information of the module, and then predict the lifetime and time-dependent energy yield of a solar cell technology. As the future work, we will use our experience in forward modeling to deconvolve the reliability issues of a module that is fielded since each mechanism has a different electrical signature. Then by calibrating the forward model, we can predict the remaining lifetime of the fielded module. This work opens new pathways to achieve 2030 Sunshot goals of LCOE below 3c/kWh by predicting the lifetime that the product can be guaranteed, helping financial institutions regarding the risk of their investment, or national laboratories to redefine the qualification and reliability protocols.

With dwindling water supplies and the impacts of climate change, many cities are turning to water sources previously considered unusable. One such source for inland cities is brackish groundwater. With prolonged drought throughout Texas, cities such as El Paso, Lubbock, and San Antonio are desalinating brackish groundwater to supplement existing water sources. Similar projects are under consideration elsewhere in Texas. While brackish groundwater contains fewer total dissolved solids than seawater, desalination of brackish groundwater is still an energy-intensive process. Brackish water desalination using reverse osmosis, the most common desalination membrane treatment process, consumes 20 to 40 times more energy than traditional surface water treatment using local water sources. This additional energy consumption leads to increased carbon emissions when using fossil fuel-generated electricity. As a result of concern over greenhouse gas emissions from additional energy consumption, some desalination plants are powered by wind-generated electricity. West Texas is a prime area for desalination of brackish groundwater using wind power, since both wind and brackish groundwater resources are abundant in the area. Most of the Texas Panhandle and Plains region has wind resource potential classified as Class 3 or higher. Additionally, brackish groundwater is found at depths less than 150 m in most of west Texas. This combination of wind and brackish groundwater resources presents opportunities for the production of alternative drinking water supplies without severe carbon emissions. Additionally, since membrane treatment is not required to operate continuously, desalination matches well with variable wind power. Implementing a brackish groundwater desalination project using wind-generated electricity requires economic feasibility, in addition to the geographic availability of the two resources. Using capital and operating cost data for wind turbines and desalination membranes, we conducted a thermoeconomic analysis for three parameters: 1) transmission and transport, 2) geographic proximity, and 3) aquifer volume. Our first parameter analyzes the cost effectiveness of tradeoffs between building infrastructure to transmit wind-generated electricity to the desalination facility versus pipelines to transport brackish groundwater to the wind turbines. Secondly, we estimate the maximum distance between the wind turbines and brackish groundwater at which desalination using wind power remains economically feasible. Finally, we estimate the minimum available brackish aquifer volume necessary to make such a project profitable. Our analysis illustrates a potential drinking water option for Texas (and other parts of the world with similar conditions) using renewable energy to treat previously unusable water. Harnessing these two resources in an economically efficient manner may help reduce future strain on the energy-water nexus.