Relevant bibliographies by topics / 1080

Academic literature on the topic '1080'

Author: Grafiati
Published: 4 June 2021
Last updated: 20 February 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '1080.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "1080"

1

Pavkov, Vladimir, Gordana Bakic, Vesna Maksimovic, Ivana Cvijovic-Alagic, Marija Prekajski-Ðordjevic, Dusan Bucevac, and Branko Matovic. "High-density ceramics obtained by andesite basalt sintering." Processing and Application of Ceramics 16, no. 2 (2022): 143–52. http://dx.doi.org/10.2298/pac2202143p.

Full text
Abstract:
In the present study, andesite basalt originated from the deposit site ?Donje Jarinje?, Serbia, was examined as a potential raw material for high-density ceramics production. The production of high-density ceramics included dry milling, homogenization, cold isostatic pressing and sintering in the air. To determine the optimal processing parameters the sintering was conducted at 1040, 1050, 1060, 1070 and 1080?C, and afterwards the sintering duration was varied from 30 to 240min at the optimal sintering temperature of 1060?C. Characterization of the starting and sintered materials included the estimation of particle size distribution, density, hardness and fracture toughness complemented with X-ray diffraction, optical light microscopy, scanning electron microscopy and energy dispersive spectroscopy analysis. Phase transformations did not occur during processing in the investigated temperature range from 1040 to 1080?C. The obtained research results showed that 99.5% of relative density and the highest hardness and fracture toughness values of 6.7GPa and 2.2MPa?m1/2, respectively, were achieved for the andesite basalt sintered at 1060?C for 60min in the air. The results of the present study confirmed that the sintered andesite basalt can be used as a high-density ceramic material for various industrial applications.
APA, Harvard, Vancouver, ISO, and other styles
2

Brown, Andrew. "Foreign Bodies: Sophocles Antigone 1080-1083." Mnemosyne 69, no. 1 (January 26, 2016): 29–54. http://dx.doi.org/10.1163/1568525x-12341773.

Full text
Abstract:
The article seeks to place Wunder’s deletion of Antigone 1080-1083 beyond reasonable doubt. The standard interpretation of the lines makes them intrusive both in their immediate context and in the play as a whole: we find that a ruling which Creon has not issued has led to pollution which does not make sense at cities which do not exist, provoking them to hatred which Creon will ignore and which will have no effect within the play or beyond it. An alternative interpretation, taking the lines as a generalisation, is no more successful, and the lines themselves are poorly written. An appendix discusses other possible interpolations in the speeches of Tiresias, concluding that lines 1004, 1013 and 1079 are probable instances.
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Woo Kyung, Jeongmin Kim, and Sungwon Na. "1080." Critical Care Medicine 43 (December 2015): 272. http://dx.doi.org/10.1097/01.ccm.0000474911.93364.ab.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Harrison, Meredith, Adam Baker, Sudeep Roy, Hitoshi Hirose, and Nicholas Cavarocchi. "1080." Critical Care Medicine 40 (December 2012): 1–328. http://dx.doi.org/10.1097/01.ccm.0000425293.58696.c9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Howard, Thomas. "1080." Medicine & Science in Sports & Exercise 40, Supplement (May 2008): S129. http://dx.doi.org/10.1249/01.mss.0000322015.22953.60.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Weiss, Matthew, Marie-Pier Boucher, Chantale Guimont, and Audrey Hebert. "1080." Critical Care Medicine 41 (December 2013): A272—A273. http://dx.doi.org/10.1097/01.ccm.0000440316.30213.1a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Silva, João, Maria Carmona, Vivian Maia, Amanda Oliveira, Pedro Vianna, Fernando Nogueira, and Luiz Malbouisson. "1080." Critical Care Medicine 42 (December 2014): A1620. http://dx.doi.org/10.1097/01.ccm.0000458577.02504.ba.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Espinal, Amy, Carolyn Bendor-Grynbaum, Shyam Shankar, Benhoor Shamian, Sushilkumar Gupta, Ilya Levin, and Taek Yoon. "1080." Critical Care Medicine 47 (January 2019): 517. http://dx.doi.org/10.1097/01.ccm.0000551825.47387.f0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jun, J. K. "1080." Ultrasound in Medicine & Biology 32, no. 5 (May 2006): P27. http://dx.doi.org/10.1016/j.ultrasmedbio.2006.02.084.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Freedman, G. M., P. Anderson, L. Goldstein, S. Litwin, J. Li, D. Watkins-Bruner, N. Nicolaou, R. Swaby, E. Sigurdson, and M. Morrow. "1080." International Journal of Radiation Oncology*Biology*Physics 66, no. 3 (November 2006): S176. http://dx.doi.org/10.1016/j.ijrobp.2006.07.345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "1080"

1

Rucquoi, Adeline. "Valladolid au Moyen âge (1080-1480) /." Paris : Ed. Publisud, 1993. http://catalogue.bnf.fr/ark:/12148/cb35624719t.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ma, Oi-yee Ivy, and 馬靄怡. "A study of Su Shi's works of prose composed during his stay in Huangzhou (1080-1084)." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42712051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ma, Oi-yee Ivy. "A study of Su Shi's works of prose composed during his stay in Huangzhou (1080-1084)." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B42712051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Roa, Rovira Joan Josep. "Mechanical Properties of HTSC at Micro/Nanometric Scale." Doctoral thesis, Universitat de Barcelona, 2010. http://hdl.handle.net/10803/1080.

Full text
Abstract:
The nanoindentation or indenter testing technique (ITT) is a functional and fast technique that can give us a lot of information about the mechanical properties of different materials at nanometric scale, from soft to brittle materials. The principle of the technique is the evaluation of the response of a material to an applied load. In a composite material, if the size of the residual imprint resulting from a certain load is lower than the size of the studied phase, then it is possible to determine its mechanical properties, and therefore its contribution to the global mechanical properties of the composite. Depending on the tipped indenter used, different equations should be applied to study the response of the material, and thus calculate stress-strain curves, and parameters such as hardness, Young's modulus, toughness, yield strength and shear stress. These equations are related to the different deformation mechanisms (elastic and elasto-to-plastic) that the material undergoes.
In the case of most of the ceramic composites, when a spherical tipped nanoindenter is used, elastic deformation takes place, and Hertz equations can be used to calculate the yield strength, shear stress and the strain-stress curves. On the other hand, when a Berckovich indenter is used, plastic deformation takes place, then Oliver and Pahrr equations must be applied to evaluate the hardness, Young's modulus and toughness. Nevertheless, in the hardness study, Indentation Size Effect (ISE) must be considered.
The mechanical properties of a ceramic superconductor material have been studied. YBa2Cu3O7-ä (YBCO or Y-123) samples textured by Bridgman and Top Seeding Melt Growth (TSMG) techniques have been obtained, and their mechanical properties studied by nanoindentation. This material presents a phase transition from tetragonal to orthorhombic that promotes a change in its electrical properties, from insulating to superconductor, and that can be achieved by partially oxygenating the material. On the other hand, the structure of the textured material is heterogeneous, and two different phases are present: Y-123 as a matrix and Y2BaCuO5 (Y-211) spherical or quasi-spherical inclusions. Moreover, the texture process induces an anisotropic structure, thus being the ab-planes the ones that transport the superconductor properties while the c-axis remains insulating. Nowadays, efforts are focused on the production of long length Superconductor Materials. Silver welding is a technique that allows us to join several TSMG samples thus trying to obtaining larger samples. Nevertheless, one important factor to be accounted for is the mechanical stability across the welding zone, which has been studied in this Thesis.
Another attempt to produce long length superconductor materials is to shape thus as wires or plates. In this case, a metallic sheet, covered with different buffer layers is used as substrate on which YBCO layers can be deposited by PED for example. These structures have been also studied in the present Thesis.
APA, Harvard, Vancouver, ISO, and other styles
5

PONTICELLI, JACOPO. "Produttivita' e Allocazione dei Fattori di Produzione: Evidenza Empirica a Livello Macro e Micro." Doctoral thesis, Università Cattolica del Sacro Cuore, 2011. http://hdl.handle.net/10280/1080.

Full text
Abstract:
Questa tesi presenta nuova evidenza empirica sulla relazione tra allocazione dei fattori di produzione e differenze di produttivita' tra paesi (primo capitolo) e tra imprese (secondo capitolo). Il primo capitolo analizza la questione degli scarsi movimenti di capitale tra paesi ricchi e paesi poveri (Lucas' paradox). Una calibrazione del modello neoclassico applicata a nuovi dati mostra come, una volta tenuto conto delle differenze nello stock di capitale umano e nella remunerazione del fattore capitale, i rendimenti da capitale fisico sono molti simili tra paesi ricchi e paesi poveri. Il secondo capitolo studia la relazione tra l'allocazione dei fattori fra imprese e la produttivita' totale dei fattori (TFP). Applicando il modello di Hsieh e Klenow (2009) a dati di imprese manifatturiere di Cile e Messico negli anni '80, si nota una minore presenza di distorsioni nell'allocazione dei fattori in Cile. Questa piu' efficiente allocazione dei fattori di produzione tra imprese potrebbe aiutare a capire perche' l'economia cilena, diversamente da quella messicana, recupero' velocemente dopo la crisi dei primi anni '80.
This Thesis provides new empirical evidence on the relationship between the allocation of factors of production and differences in productivity across countries (first chapter) and across firms (second chapter). In the first chapter I address the issue of small capital flows between rich and poor countries (the so-called Lucas' paradox) observed in data. Applying a calibration approach to new data I show that, taking into account differences in human capital and in the capital share on output, returns to physical capital in rich and poor countries are fairly close. In the second chapter I investigate the relationship between the allocation of factors across firms within a country and TFP. Applying the model proposed by Hsieh and Klenow (2009) to firm level data of Chile and Mexico during 1980s I find that there are less distortions operating on average in the Chilean manufacturing sector with respect to the Mexican one. I argue that the more efficient allocation of factors across firms could help explain why Chile recovered rapidly while Mexico stagnated after the crisis of the early 1980s.
APA, Harvard, Vancouver, ISO, and other styles
6

Ferro, Daniel Augusto. "Caracterização e estampabilidade de um aço SAE 1080 fosfatizado." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-05012016-155251/.

Full text
Abstract:
Devido a crescente necessidade de elevação dos níveis de conformação em peças estampadas em geral, existe uma demanda cada vez maior em ligas e processos diversificados que atendam as variadas exigências do setor de produtos estampados e posteriormente tratados termicamente para aumento de dureza. Desse modo desenvolveu-se a liga C80U modificada, que é uma variante da liga C80U especificada na norma DIN EN ISO 4957 porém com adição de Cromo, entretanto a liga C80U modificada ainda é pouco estudada e pouca informação técnica se tem a seu respeito. Com a finalidade de melhor conhecimento técnico dessa liga, foram conduzidos estudos de caracterização em amostras laminadas a quente e após processo de esferoidização posteriormente sendo revestidas com fosfato de zinco. Foram realizados estudos de composição química, microestrutura, textura cristalográfica, propriedades mecânicas e estrutura do fosfato, além de levantamento da curva CLC através do método Nakazima e evolução da rugosidade 2D e 3D em amostras com e sem revestimento de fosfato, antes e após conformação. Através dos resultados parciais encontrados, foi possível definir o lado da curva CLC relacionado ao estiramento da chapa bem como comparar o deslocamento e a força do punção no teste Nakazima conformando-se amostras esferoidizadas sem revestimento e com revestimento de fosfato.
Due to the increasing demand for enhanced formability levels of stamped parts in general, there is also an increasing demand for various alloys and processes that comply with the various requirements associated with stamped products that are subsequently heat treated to increase their hardness. Along this line, a modified C80U alloy has been developed, which is a variant of the alloy C80U specified in the standard DIN EN ISO 4957 but with the addition of Chrome. However, this alloy is still poorly studied and little technical information is available about it. In order to increase the knowledge of this alloy, characterization studies were conducted on hot rolled, after spheroidization and subsequently coated with zinc phosphate samples. The studies performed included chemical composition, microstructure, crystallografic texture, mechanical properties and analysis of the phosphate structure, as well as Nakazima tests in order to obtain the forming limit diagram (FLD) curve and the 2D and 3D roughness evolution of spheroidized samples coated and uncoated before and after the stamping process. Through the partial results obtained, it was possible to define the side of FLD curve related to stretching of the sheet as well as comparing the displacement and force of the punch on Nakazima test, stamping spheroidized samples both uncoated and coated with zinc phosphate.
APA, Harvard, Vancouver, ISO, and other styles
7

Allsop, Sinead. "Minimising native non-target uptake of 1080 fox baits." Thesis, Allsop, Sinead (2014) Minimising native non-target uptake of 1080 fox baits. Honours thesis, Murdoch University, 2014. https://researchrepository.murdoch.edu.au/id/eprint/25333/.

Full text
Abstract:
Red foxes (Vulpes vulpes) are a significant pest species threatening the survival of endangered and vulnerable native Australian fauna. Lethal baiting with the toxin 1080 is currently the most widely implemented form of control. However, non-target uptake is a problem, even in Western Australia where most native species have a high 1080 tolerance. It reduces the number of baits available to foxes and therefore the efficiency and cost-effectiveness of 1080 fox baiting operations. To investigate bait presentation and the use of aversive tastant agents as potential techniques to reduce non-target uptake of 1080 baits, two separate studies were conducted. Study 1 examined different non-toxic meat bait presentations to find the presentation that had the lowest non-target uptake. Baits were laid on the surface, suspended, buried or wrapped in kangaroo hide. Study 2 investigated the effectiveness of potential deterrents in causing aversion both immediately and accumulatively over time. Nine different deterrents (washing-up liquid, citric acid, wasabi, baking powder, bicarbonate soda, salt, sodium saccharin, Bitrex and chilli) were tested for immediate aversion and chilli and Bitrex were tested for accumulative aversion. A cafeteria-style presentation was used, with deterrents applied to apple baits of control, low and high concentrations. For Study 1 and 2 animal activity and bait take were monitored on remote-sensing Reconyx cameras for later photo analysis. The results of Study 1 suggested no significant effect of bait presentation. However, as hypothesised the longevity and non-target uptake was lowest for buried baits. Study 2 suggested that salt, wasabi and chilli created immediate aversion in the most abundant non-target species, quokkas. However, aversion was only carried-over onto untreated apple baits in wasabi and chilli. These findings suggest that bait presentation and the use of aversive tastant agents may have potential to decrease non-target uptake and be employed in future baiting 1080 fox baiting operations.
APA, Harvard, Vancouver, ISO, and other styles
8

Morgan, D. R. "Maximising the effectiveness of aerial 1080 control of possums (Trichosurus vulpecula)." Diss., Connect to this title online, 2004. http://theses.lincoln.ac.nz/public/adt-NZLIU20060911.123107/index.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Morgan, David R. "Maximising the effectiveness of aerial 1080 control of possums (Trichosurus vulpecula)." Lincoln University, 2004. http://hdl.handle.net/10182/20.

Full text
Abstract:
Aerial control using 1080 (sodium monofluoroacetate) baits is widely used in New Zealand for the control of introduced brushtail possums (Trichosurus vulpecula), with the aim of protecting national conservation and agricultural values from these damaging pests. This thesis integrates research, completed over 25 years, that was motivated by growing recognition in the 1970s of the extent of possum impacts and the need to improve the effectiveness and efficiency of the control operation. Field research assessed the palatability of three types of cereal-based pellet baits and carrot baits in different regions, habitat types and seasons. Palatability was assessed by the consumption of the different bait types presented independently of each other on 15-30 plots, with rotation of bait types at plots on successive nights to provide equal exposure to each bait type. There was regional variation in possums' bait preferences, possibly reflecting genotypic differences, whereas seasonal variation was less evident. Carrot bait was preferred or equally preferred to cereal bait in 14 out of 20 field trials. The proportion of possums eating baits was then investigated by, firstly, developing a technique for tracing bait acceptance using rhodamine B, a UV-fluorescent dye. In four field trials, more than 95% of possums accepted three types of dye-marked bait, eliminating bait refusal as a major reason for low kills in winter control operations. In a fifth trial, conducted in summer, only 68% of possums accepted bait suggesting that seasonal availability of favoured foods may influence bait acceptance. Since possums must encounter baits before deciding whether to eat them, field studies were undertaken to assess the coverage achieved in normal aerial baiting operations. Large gaps, up to 400 m in width, were often found between baiting swaths; these could allow some possums to survive. A controlled field experiment, using acceptance of rhodamine-dyed bait as a measure of effectiveness, showed that bait distribution was least accurate where flight paths were not marked. Where gaps of 100 m between flight paths were deliberately created, bait acceptance was slower and less than where coverage was complete. Sowing baits at 3 kg/ha was as effective as at 10 kg/ha, indicating the potential for substantially reducing operational costs by using machinery capable of faultlessly distributing baits at low rates. Navigational guidance systems were evaluated and found to improve the accuracy of bait distribution. During 1993-1997, when a lower sowing rate of 5 kg/ha was adopted operationally by regional managers, control effectiveness was unchanged but annual savings of around $9 million accrued. Because of the lack of suitable sowing machinery, a bucket was developed to permit faultless distribution of baits at lower rates, demonstrating the possibility of yet further cost-savings. The possibility of seasonal food availability affecting bait acceptance was investigated in three different forest habitats. Dyed baits were aerially distributed on 100 ha at each site in each season over two years. In each trial, fat-based condition indices of possums were calculated and the abundance of possum-preferred plant foods described. Bait acceptance was consistently high (85-100%) in the 24 trials, and was not influenced by either condition or availability of preferred foods. It seems likely that seasonal variation in operational effectiveness is caused by either the availability of sharply seasonal, scarce foods that possums may feed on intensively for brief periods, or by warmer temperatures that render 1080 less effective. The influence of 1080 on acceptance of (rhodamine-dyed) baits was investigated in a field trial. Examination of possums for dye-marking showed that 25% of possums refused to eat either a lethal quantity of bait or any bait at all, compared with 98% of possums eating non-toxic bait. This indicated that 1080 is aversive to possums, which is a potential major reason for their surviving control operations. Pen trials were therefore conducted to further examine the problem and to seek solutions. Toxic carrot baits were rejected by 27.5% of possums, equally by smell and taste aversion, whereas toxic cereal pellets were rejected by 34%, mainly by taste aversion. Orange and cinnamon were shown to be among the most preferred of 42 flavours tested and, when applied to toxic baits, 1080 was effectively masked. Bait refusal was reduced to ≤7%, the same as that recorded for possums presented with flavoured non-toxic baits. For long-term control of possum populations, aerial 1080 baiting can be used sequentially with other poisoning methods. However, the compatibility of these methods is dependent on the likelihood of possums developing bait shyness if sublethally dosed. Studies were therefore conducted to characterise and compare the four main toxicants used (1080, cyanide, cholecalciferol and brodifacoum) for induction and mitigation of bait shyness. Shyness was induced in approximately 80% of possums sublethally dosed with cyanide, 60% with 1080, 20% with cholecalciferol, and 0% with brodifacoum. Cyanide and 1080 shyness were found to persist in many possums for at least 12 and 24 months, respectively. Use of alternative bait types, and of baits containing an alternative slow-acting toxin (brodifacoum) were shown to be effective ways of overcoming shyness. This, and other related research, is reviewed to provide operational specifications that maximise the likelihood that all targeted possums will (i) encounter bait, (ii) eat it, and (iii) die. The likely future use of aerial 1080 baiting is described and the technological, economic, environmental and social constraints on its sustainability are discussed. Finally, the uptake of the research by possum managers is considered, and areas identified in the thesis where information is incomplete are summarised as prioritised topics for further research.
APA, Harvard, Vancouver, ISO, and other styles
10

Alkarrawi, Mohammed. "2-Hydroxybenzoate analogue mediated apoptosis in human HT-1080 fibrosarcoma cells." Thesis, Cardiff University, 2005. http://orca.cf.ac.uk/56105/.

Full text
Abstract:
The antitumour activities of 18 benzoic acid and 2-hydroxybenzoic acid analogues were investigated in HT-1080 fibrosarcoma cell line. Several approaches were used to identify the most effective apoptotic agents capable of inhibiting cell population expansion of HT-1080 cells mostly at a concentration of 0.4mM. Techniques used in this study included: cell viability assays (MTT, direct count and time-lapse tracking images), morphology (DAPI, haematoxylin-eosin, methyl green-pyronin y, and SEM), immunocytochemistry (Annexin V, caspase-3) and pharmacology (2-hydroxybenzoate uptake). The results indicated that most of these compounds showed antiproliferative activities at specific concentrations (range 0.025-8mM), with an incubation time of 2-180 hours. It is evident that zinc 2-hydroxybenzoate was the most effective antiproliferative agent at 0.3 and 0.4mM. Other analogues, mainly calcium, also showed antiproliferative activities but at higher concentrations (up to 8mM). The growth inhibitory effect on HT-1080 cells population after treatment with either calcium or zinc 2-hydroxybenzoates was identified as the occurrence of apoptosis. This was confirmed by the morphological techniques as well as by immunoassay including annexin V and caspase- 3, measured by flow cytometry. Although strong evidence has been presented here for apoptosis, the genetic mechanism remains uncertain. Neither the expression of the six proteins p53, p21, Bax, Bcl-2, histones and TNF-a, nor the cell cycle analysis was able to fully elucidate the mechanism of action of calcium and zinc 2-hydroxybenzoate on HT-1080 cells. Nonetheless, calcium and zinc 2-hydroxybenzoate-induced apoptosis clearly involved caspase-3 through Bax and p53/p21, respectively, and displayed the properties of potentially therapeutic compounds.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "1080"

1

Армен Хачикян. История Армении: Краткий очерк. Independently Published, 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Любовь Васильева. Потери российской армии на востоке Украин. Lulu Press, Inc., 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Михаил Герман. Василий Кандинский. Parkstone International, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Эшли Басси. Экспрессионизм. Parkstone International, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

cañameras, Andreu Andrade. MInecraft нарисуй свой комикс. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

cañameras, Andreu Andrade. Minecraft нарисуй свой комикс. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

cañameras, Andreu Andrade. MInecraft нарисуй свой комикс. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Evgrashkina, Ekaterina. Семиотическая природа смысловой неопределенности в современно: на материале немецкоязычной и русскоязычной поэзии. Lang GmbH, Internationaler Verlag der Wissenschaften, Peter, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Evgrashkina, Ekaterina. Семиотическая природа смысловой неопределенности в современно: на материале немецкоязычной и русскоязычной поэзии. Lang GmbH, Internationaler Verlag der Wissenschaften, Peter, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Evgrashkina, Ekaterina. Семиотическая природа смысловой неопределенности в современно: на материале немецкоязычной и русскоязычной поэзии. Lang GmbH, Internationaler Verlag der Wissenschaften, Peter, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "1080"

1

Cartwright, Charlotte. "Emma of Ivry, c. 1008–1080." In Medieval Elite Women and the Exercise of Power, 1100–1400, 91–111. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-01346-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jain, M., and A. Gupta. "1080 Diamagnetic susceptibility of Cl2H12MgO6." In Diamagnetic Susceptibility and Anisotropy of Inorganic and Organometallic Compounds, 1130. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-44694-1_1081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Elste, Martin. "Die Kunst der Fuge BWV 1080." In Meilensteine der Bach-Interpretation 1750–2000, 400–415. Stuttgart: J.B. Metzler, 2000. http://dx.doi.org/10.1007/978-3-476-03792-3_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chihara, H., and N. Nakamura. "NQRS Data for C8H7Cl2NO (Subst. No. 1080)." In Landolt-Börnstein - Group III Condensed Matter, 1231. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-02892-2_1085.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Grossman, Avraham. "8. Samuel ben Meir / Rashbam (1080-1160)." In Hebrew Bible / Old Testament. I: From the Beginnings to the Middle Ages (Until 1300). Part 2: The Middle Ages, 358–63. Göttingen: Vandenhoeck & Ruprecht, 2000. http://dx.doi.org/10.13109/9783666535079.358.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kaufmann, Carl B. "Leo H. Baekeland." In 100+ Years of Plastics. Leo Baekeland and Beyond, 1–10. Washington, DC: American Chemical Society, 2011. http://dx.doi.org/10.1021/bk-2011-1080.ch001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Karraker, Hugh. "A Portrait of Leo H. Baekeland." In 100+ Years of Plastics. Leo Baekeland and Beyond, 11–20. Washington, DC: American Chemical Society, 2011. http://dx.doi.org/10.1021/bk-2011-1080.ch002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Patterson, Gary D. "Materia Polymerica: Bakelite." In 100+ Years of Plastics. Leo Baekeland and Beyond, 21–29. Washington, DC: American Chemical Society, 2011. http://dx.doi.org/10.1021/bk-2011-1080.ch003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wagner, Burkhard E. "Leo Baekeland’s Legacy – 100 Years of Plastics." In 100+ Years of Plastics. Leo Baekeland and Beyond, 31–67. Washington, DC: American Chemical Society, 2011. http://dx.doi.org/10.1021/bk-2011-1080.ch004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sperling, L. H. "History of Interpenetrating Polymer Networks Starting with Bakelite-Based Compositions." In 100+ Years of Plastics. Leo Baekeland and Beyond, 69–82. Washington, DC: American Chemical Society, 2011. http://dx.doi.org/10.1021/bk-2011-1080.ch005.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "1080"

1

Morales, Charles, Helio Goldenstein, and Manoel Marcos Guimarães Lopes. "AÇOS SAE 1080 PARA MOLAS." In 49º Seminário de Laminação. São Paulo: Editora Blucher, 2012. http://dx.doi.org/10.5151/2594-5297-22635.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Front Matter for Volume 1080." In GRAVITATION AND COSMOLOGY: Proceedings of the Third International Meeting on Gravitation and Cosmology. American Institute of Physics, 2008. http://dx.doi.org/10.1063/v1080.frontmatter.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Back Matter for Volume 1080." In GRAVITATION AND COSMOLOGY: Proceedings of the Third International Meeting on Gravitation and Cosmology. American Institute of Physics, 2008. http://dx.doi.org/10.1063/v1080.backmatter.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pinho, Renan Gurgel, Nívea Rodrigues Leite, and Marcelo José Gomes da Silva. "ESFEROIDIZAÇÃO DO AÇO SAE 1080." In 15º Enemet. São Paulo: Editora Blucher, 2017. http://dx.doi.org/10.5151/1516-392x-26897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Glenn, William E. "A 1920×1080 60P System that is Compatible with a 1920×1080 30I Format." In SMPTE Advanced Motion Imaging Conference. IEEE, 2002. http://dx.doi.org/10.5594/m00219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Construction Experience With CLSM Fly Ash Slurry for Underground Facilities." In "SP-153: Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete Proceedings Fifth International Conference Milwauk". American Concrete Institute, 1995. http://dx.doi.org/10.14359/1080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vazquez-Zuniga, L. A., S. Chung, and Y. Jeong. "Temperature dependence of a high-power ytterbium-doped fiber amplifier operating at 1060 nm and 1080 nm." In 2009 14th OptoElectronics and Communications Conference (OECC). IEEE, 2009. http://dx.doi.org/10.1109/oecc.2009.5218261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ferro, Daniel Augusto, and Ronald Lesley Plaut. "CARACTERIZAÇÃO E ESTAMPABILIDADE DE UM AÇO SAE 1080 FOSFATIZADO." In 51º Seminário de Laminação - Processos e Produtos Laminados e Revestidos - Internacional. São Paulo: Editora Blucher, 2014. http://dx.doi.org/10.5151/1983-4764-25236.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Osten, Stefan, Sven Krüger, and Andreas Hermerschmidt. "New HDTV (1920 × 1080) phase-only SLM – Poster Paper." In Proceedings of the Sixth International Workshop. PUBLISHED BY IMPERIAL COLLEGE PRESS AND DISTRIBUTED BY WORLD SCIENTIFIC PUBLISHING CO., 2008. http://dx.doi.org/10.1142/9781848161115_0022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ribeiro, Joshua Alyson Freitas, Diego Salmin Costa, and Marcelo José Gomes da Silva. "CARACTERIZAÇÃO MICROESTRUTURAL DO AÇO SAE 1080 APÓS DIFERENTES TRATAMENTOS TÉRMICOS." In 17º Enemet. São Paulo: Editora Blucher, 2017. http://dx.doi.org/10.5151/2594-4711-30223.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "1080"

1

Winholtz, R. A., and J. B. Cohen. Separation of the Macro- and Micro-Stresses in Plastically Deformed 1080 Steel. Fort Belvoir, VA: Defense Technical Information Center, August 1988. http://dx.doi.org/10.21236/ada199337.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bergstrom, K. A., and T. H. Mitchell. Geophysical survey for proposed borehole 199-K-108A, 100-K Area. Office of Scientific and Technical Information (OSTI), February 1994. http://dx.doi.org/10.2172/10170232.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Downey, James. DDG 1000 Zumwalt Class Destroyer (DDG 1000). Fort Belvoir, VA: Defense Technical Information Center, December 2013. http://dx.doi.org/10.21236/ada613378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Downey, James. DDG-1000 Zumwalt Class Destroyer (DDG-1000). Fort Belvoir, VA: Defense Technical Information Center, November 2015. http://dx.doi.org/10.21236/ad1019140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Allen, Mark B. Building 1090 Improvements. Office of Scientific and Technical Information (OSTI), September 2018. http://dx.doi.org/10.2172/1471451.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pokrass, Richard, Michael Ellis, and Bruce Crock. SCI-1000 Evaluation. Fort Belvoir, VA: Defense Technical Information Center, June 1998. http://dx.doi.org/10.21236/ada353066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

L. M. Dittmer. Remaining Sites Verification Package for the 100-F-36, 108-F Biological Laboratory, and for the 116-F-15, 108-F Radiation Crib, Waste Site Reclassification Form 2007-002. Office of Scientific and Technical Information (OSTI), May 2007. http://dx.doi.org/10.2172/944204.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

L. M. Dittmer. Remaining Sites Verification Package for the 100-F-36, 108-F Biological Laboratory, and for the 116-F-15, 108-F Radiation Crib, Waste Site Reclassification Form 2007-003. Office of Scientific and Technical Information (OSTI), May 2007. http://dx.doi.org/10.2172/944225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Truex, Michael J., Vincent R. Vermeul, Nikolla Qafoku, and Brady D. Lee. Sampling Instruction: 100-D-100 and 100-D-30/104 Excavation Sites. Office of Scientific and Technical Information (OSTI), August 2014. http://dx.doi.org/10.2172/1170498.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nimick, Francis B. Division 1000 Safety Culture. Office of Scientific and Technical Information (OSTI), November 2016. http://dx.doi.org/10.2172/1494174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic '1080' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography