Academic literature on the topic 'Плита модельна'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Плита модельна.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Плита модельна"
Bekhta, Pavlo, and Liubov Baizova. "Математична модель процесу пресування легких стружкових плит із вмістом пінополістиролу." Наукові праці Лісівничої академії наук України, no. 17 (October 25, 2018): 178–84. http://dx.doi.org/10.15421/411833.
Full textМ.Г. Сур’янінов, С.П. Неутов, and І.Б. Корнеєва. "ЕКСПЕРИМЕНТАЛЬНІ ДОСЛІДЖЕННЯ НЕСУЧОЇ ЗДАТНОСТІ МОДЕЛІ ЗАЛІЗОБЕТОННОЇ ПУСТОТНОЇ ПЛИТИ ПЕРЕКРИТТЯ." Наукові нотатки, no. 68 (January 30, 2020): 107–12. http://dx.doi.org/10.36910/6775.24153966.2019.68.17.
Full textKozak, R., and P. Bekhta. "Математичне моделювання і порівняльний аналіз тривалості пресування стружкових плит на основі деревинної та солом’яної стружки." Наукові праці Лісівничої академії наук України, no. 13 (November 2, 2015): 224–30. http://dx.doi.org/10.15421/411532.
Full textКудряшов, Вадим, and Сергей Ботян. "Теплопроводность цементных армированных плит при нестационарном тепловом режиме на основе данных экспериментальных исследований и численного моделирования." Journal of Civil Protection 1, no. 2 (May 2, 2017): 139–52. http://dx.doi.org/10.33408/2519-237x.2017.1-2.139.
Full textЕвсеев, М. Н., and В. П. Трубицын. "МОДЕЛЬ ОБЩЕМАНТИЙНОЙ КОНВЕКЦИИ С ОБРАЗОВАНИЕМ ДОЛГОЖИВУЩЕГО ИЗОЛИРОВАННОГО РЕЗЕРВУАРА, ПИТАЮЩЕГО СРЕДИННО-ОКЕАНИЧЕСКИЙ ХРЕБЕТ, "Доклады Академии наук"." Доклады Академии Наук, no. 2 (2017): 205–8. http://dx.doi.org/10.7868/s0869565217260188.
Full textШейдаков, Д. Н., И. Б. Михайлова, and Н. Е. Шейдаков. "Влияние поверхностных напряжений на потерю устойчивости нелинейно-упругих тел, "Наука Юга России"." Science in the South of Russia, no. 4 (2019): 3–11. http://dx.doi.org/10.7868/s25001640190401.
Full textПолевода, Иван, and Наталья Зайнудинова. "Моделирование поведения железобетонных предварительно напряженных плит без сцепления арматуры с бетоном в программном комплексе ANSYS." Journal of Civil Protection 1, no. 4 (October 26, 2017): 385–91. http://dx.doi.org/10.33408/2519-237x.2017.1-4.385.
Full textBilodid, Ie, O. Dudka, and Yu Kovbasenko. "Аналіз критичності під час протікання важкої аварії у басейнах витримки відпрацьованого ядерного палива ВВЕР-1000." Nuclear and Radiation Safety, no. 3(91) (September 17, 2021): 11–21. http://dx.doi.org/10.32918/nrs.2021.3(91).02.
Full textPylypiv, I. Z. "МАТЕМАТИЧНИЙ ОПИС ПРОЦЕСУ ГНУТТЯ КРИВОЛІНІЙНИХ ЕЛЕМЕНТІВ ІЗ ДЕРЕВОВОЛОКНИСТИХ ПЛИТ." Scientific Bulletin of UNFU 25, no. 10 (December 29, 2015): 335–40. http://dx.doi.org/10.15421/40251051.
Full textЧеканович, М. Г., С. М. Романенко, and Я. П. Андрієвська. "СИСТЕМА ЗОВНІШНЬОГО ПІДСИЛЕННЯ ЗАЛІЗОБЕТОННИХ ЗГИНАльНИХ ЕЛЕМЕНТІВ І МОДЕЛЮВАННЯ ЇЇ РОБОТИ." Ресурсоекономні матеріали, конструкції, будівлі та споруди, no. 36 (November 24, 2018): 428–35. http://dx.doi.org/10.31713/budres.v0i36.295.
Full textDissertations / Theses on the topic "Плита модельна"
Більченко, Олександр Сергійович. "Розроблення технологічного процесу виготовлення виливка «Упор», організація та планування сумішоприготувального відділення ливарного цеху." Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/34812.
Full textDiploma project: 91 pages, 36 tables, 7 figures, 8 references. Object of design - Development of technological process of casting "Emphasis", organization and planning of the mixture preparation department of the foundry. The subject of design is the technology of the casting mold and the organization of the mixture preparation department. The results of the design - the technology of the mold is developed, the technical planning of the mixture preparation department and the calculation of the foundry equipment are performed. The design results can be recommended: for implementation in the production of castings weighing up to 350 kg, medium complexity in terms of mass production. Field of use - mechanical engineering, instrument making, complex, etc.
Буряк, Андрій Андрійович. "Розроблення технологічного процесу виготовлення чавунного виливка «Корпус», організація та планування формувального відділення ливарного цеху." Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/43671.
Full textThesis project: pages, 22 tables, 10 figures, 9 references. The object of design - the technological process of manufacturing a carbon steel casting "Gearbox housing" weighing 3,04 kg by casting in disposable sand claymolds. The subject of design - the technology of the mold and the organization of the molding department of the foundry. Design results - the technology of the casting mold for a given casting is developed, the technical planning of the molding department and the calculation ofthe unit of the casting equipment are performed. Design results - can be recommended at foundries with a similar nature of production. Field of use - enterprises of agricultural engineering, military-industrial complex, etc.
Шевчун, Дмитро Юрійович. "Ливарний комплекс машинобудівного заводу з розробленням технологій виготовлення виливків різними способами лиття." Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/42993.
Full textThe dissertation consists of: 115 pages; 11 figs .; 21 tables; 25 links. The project envisages a foundry with a capacity of 1000 tons of suitable castings per year from such metal as alloys of grades 20L 25L 35L and 40HL. The technological process of making the casting "Wheel" weighing 410 kg from 35L metal and the second casting "Cover" weighing 0.9 kg from 25L metal is being developed. The results of the design – the technology of casting "Wheel" by casting in disposable sand-clay molds and the technology of casting "Cover" by casting on melted models. The technical planning of the foundry department and foundry equipment was performed. When designing the departments, an analysis of the need for equipment, the calculation of organizational and economic factors, the result of which is the calculation of wages (basic and auxiliary), depreciation costs of equipment and energy resources used to accelerate the production process. According to the regulations, all measures for the safety of life of employees are taken into account and attention is paid to preserving the environmental friendliness of the environment by installing precautions near the equipment and installing hoods in the building structure and directly in the finishing department.
Пантелят, Михайло Гаррійович, and О. А. Коріневський. "Комп’ютерне моделювання теплового поля індукційної кухонної плити та посуду, що нагрівається." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/47638.
Full textЕль, Жамхілі Зухейр. "Використання інноваційно-технологічних рішень в висотному будівництві." Магістерська робота, 2020. https://dspace.znu.edu.ua/jspui/handle/12345/2302.
Full textUA : В роботі проведено дослідження характеру розвитку висотного будівництва в України, що дозволяє визначити технологічний стан і ступінь його наближення до світових показників даного будівельного сектору, вирішити питання вартості зведення та житлової площі висотних будівель. В роботі розроблено інноваційне технологічне рішення із зведення будівель з урахуванням сучасного вітчизняного стану висотного будівництва у розрізі створення моделі системи нез’ємної опалубки для влаштування вертикальних конструктивних елементів висотних будівель, отримана ефективність її застосування в технології опалубних робіт.
EN : The study conducted the nature of the development of high-rise construction in Ukraine, which allows to determine the technological state and the degree of its approximation to the world indicators of this construction sector, to solve the issue of the cost of construction and living space of high-rise buildings. In the work, an innovative technological solution for the construction of buildings was developed taking into account the current domestic state of high-rise construction in the context of creating a model of the fixed formwork system for the device of vertical structural elements of high-rise buildings, and the effectiveness of its application in the formwork technology was obtained.