Academic literature on the topic 'Оксид нікелю'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Оксид нікелю.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Оксид нікелю"
Калинин, Евгений. "Дослідження впливу борвмістних дисперсних фаз на трибологічні характеристики наплавленого покриття На основі сплаву ПГ-10Н-01." Науковий жарнал «Технічний сервіс агропромислового лісового та транспортного комплексів», no. 21 (December 7, 2020): 8–15. http://dx.doi.org/10.37700/ts.2020.21.8-15.
Full textNguyen, Tien Hiep. "Kinetics of the hydrogen reduction process of nickel oxide nanopowder in non-isothermal conditions." Metaloznavstvo ta obrobka metalìv 96, no. 4 (December 1, 2020): 47–55. http://dx.doi.org/10.15407/mom2020.04.047.
Full textDissertations / Theses on the topic "Оксид нікелю"
Овчаренко, Ольга Олександрівна, Микола Дмитрович Сахненко, and Марина Віталіївна Ведь. "Композиційні електролітичні покриття на основі нікелю, армовані ультрадисперсними частинками." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/41703.
Full textМазанка, Вероніка Михайлівна. "Кулонометричний генератор дiоксиду карбону для створення перевiрочних сумiшей." Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/34820.
Full textДисертація присвячена дослідженню електрохімічної поведінки електродних матеріалів в розчинах оксалатної кислоти для контрольованого генерування діоксиду карбону з високим виходом за струмом в кулонометричному генераторі, який може бути використаний для перевірки роботоспроможності засобів моніторингу концентрації вуглекислого газу в повітряному середовищі. Показано високу стійкість неіржавної сталі в розчинах оксалатної кислоти за умов катодної поляризації та після вимкнення катодного струму. Досліджено електрокаталітичні властивості оксидів нікелю та олова, отриманих при термічному окисленні і нанесених на титанову та алюмінієву основу. Показано перевагу титанової основи перед алюмінієвою, що пов'язано з її більшою схильністю до пасивації та кращою адгезією до електролітичних покриттів. Створена комірка кулонометричного генератора, де в якості катоду виступає неіржавна сталь, а як анод – суміш оксиду нікелю та стануму нанесених термічним шляхом на титанову основу. Дана конструкція дозволяє отримувати вуглекислий газ з виходом за струмом газу 80 % в широкому діапазоні густин струму впродовж значного терміну експлуатації.
The dissertation is devoted to the study of the electrochemical behavior of electrode materials in solutions of oxalic acid for the controlled generation of dioxide by a coulometric generator, which can be used to test the operability of the means of monitoring the concentration of carbon dioxide in the air. High stability of stainless steel in oxalic acid solutions is demonstrated under cathode polarization and after cathode current shutdown. The electrocatalytic properties of nickel oxides obtained by thermal oxidation and deposited on a titanium and aluminum base were investigated. The advantage of titanium base over aluminum is shown, which is due to its greater tendency to passivation and better adhesion to electrolytic coatings. and tin. A cell of a coulometric generator is created, where stainless steel is used as the cathode and thermally applied on the titanium base as the anode. This design allows the production of carbon dioxide gas with a gas output of 80% o over a wide range of current densities over a long life.
Черенкова, Н. В., Ю. М. Кулінічев, Валерій Євгенович Ведь, and Лідія Василівна Кричковська. "Вивчення параметрів, що визначають дисперсність нанорозмірних частинок оксиду нікелю." Thesis, НТУ "ХПІ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/16074.
Full textЧернякова, М. Р. "Дослідження структури та властивостей хромоалітованих покриттів на нікелі." Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/71111.
Full textОвчаренко, Ольга Олександрівна. "Композиційні електрохімічні покриття на основі міді та нікелю, модифіковані ультрадисперсними частинками." Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/22725.
Full textThesis for granting the Degree of Candidate of Technical sciences in specialty 05.17.03 – Technical Electrochemistry. – National Technical University "Kharkiv Polytechnic Institute". Kharkiv, 2016. Dissertation is devoted to development of the technology of composite electrochemical coatings based on copper and nickel, reinforced nanoscale aluminium. The method of chemical dispersion to produce a hydrosol of corundum Al2O3 is proposed. Electrochemical processes regularities of the copper and nickel composite coatings deposition have established. The influence of a dispersed phase concentration in electrolytes-suspensions on the physico-mechanical properties of materials, such as microhardness, tensile strength and yield strength, has detected. It has shown the resulting composites have higher strength at sufficiently low concentrations in the Al₂O₃-electrolyte (1-2 g/dm³) compared with samples obtained by the introduction of the coarse-dispersion aluminium electrolyte. The influence of the corundum content on the composition and morphology of coatings has been found experimentally. The electron microscopy results detects to a continuation of a crystal lattice. The results of atomic force microscopy have allowed to determine the crystallite size and evaluate the topography of the surface. The flowchart of the electrochemical formation of Cu-Al₂O₃ and Ni-Al₂O₃ composites are proposed.
Овчаренко, Ольга Олександрівна. "Композиційні електрохімічні покриття на основі міді та нікелю, модифіковані ультрадисперсними частинками." Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/22724.
Full textThesis for granting the Degree of Candidate of Technical sciences in specialty 05.17.03 – Technical Electrochemistry. – National Technical University "Kharkiv Polytechnic Institute". Kharkiv, 2016. Dissertation is devoted to development of the technology of composite electrochemical coatings based on copper and nickel, reinforced nanoscale aluminium. The method of chemical dispersion to produce a hydrosol of corundum Al2O3 is proposed. Electrochemical processes regularities of the copper and nickel composite coatings deposition have established. The influence of a dispersed phase concentration in electrolytes-suspensions on the physico-mechanical properties of materials, such as microhardness, tensile strength and yield strength, has detected. It has shown the resulting composites have higher strength at sufficiently low concentrations in the Al₂O₃-electrolyte (1-2 g/dm³) compared with samples obtained by the introduction of the coarse-dispersion aluminium electrolyte. The influence of the corundum content on the composition and morphology of coatings has been found experimentally. The electron microscopy results detects to a continuation of a crystal lattice. The results of atomic force microscopy have allowed to determine the crystallite size and evaluate the topography of the surface. The flowchart of the electrochemical formation of Cu-Al₂O₃ and Ni-Al₂O₃ composites are proposed.
Бутенко, Анатолій Миколайович, Вячеслав Володимирович Резніченко, Олексій Якович Лобойко, and Наталя Борисівна Маркова. "Особливості хімічного витягнення феруму із відпрацьованих виробів на основі вольфраму у присутності озону." Thesis, НТУ "ХПІ", 2010. http://repository.kpi.kharkov.ua/handle/KhPI-Press/30165.
Full textВоронова, Анастасія Сергіївна. "Синтез та каталітичні властивості мезопоруватих нікель-кобальтових шпінелей та їх композитів." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/29007.
Full textIn the context of modern search and investigation of alternative energy sources, electrochemical energy storage and convertion systems occupy a significant niche. Open for research issue, related to electrochemical energy sources, is the development and search of efficient, environmentally friendly and cost-effective catalysts for fuel cells. A promising direction in this area is the study of mixed oxide catalysts, namely catalysts with a spinel structure. The compound that attracts considerable attention in this area is the Ni-, Co-spinel of the NiCo2O4 composition and its various composite materials with the developed surface carrier. The object of the study is Ni-, Co-spinels and their composites with multiwalled carbon nanotubes and activated carbon. The subject of the study is the synthesis, physical and chemical properties of Ni-, Co-spinels and their composites with multiwalled carbon nanotubes and activated carbon. The research method is experimental. During the work, the structural characteristics and surface morphology of the samples were investigated using methods of low-temperature N2 adsorption-desorption, scanning electron microscopy and X-ray diffration. The catalytic activity of the synthesized samples was investigated in the course of a model liquid-phase heterogeneous-catalytic reaction of sodium borohydride hydrolysis and decomposition of hydrogen peroxide. The ion exchange characteristics of the synthesized samples surface were investigated during pH-tertiometric titration. A simple and technological method of co-precipitation was proposed as a synthesis method. Pure nickel cobaltite and its composites with active carbon and carbon nanotubes were synthesized. As the obtained data showed, the synthesized samples possess all the properties of an effective catalyst that can be used in electrochemical energy sources. The synthesized composite materials can be used in a variety of electrochemical storage and energy conversion devices, including direct borohydride fuel cells.