Academic literature on the topic 'Наповнювач різної хімічної природи'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Наповнювач різної хімічної природи.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Наповнювач різної хімічної природи"
Гоц, Владимир, Олесь Ластивка, Александр Томин, and Ольга Ковальчук. "КОРРОЗИОННАЯ СТОЙКОСТЬ ПОЛИЭФИРНЫХ ПОРОШКОВЫХ ПОКРЫТИЙ С ИСПОЛЬЗОВАНИЕМ НАПОЛНИТЕЛЕЙ РАЗЛИЧНОЙ ХИМИЧЕСКОЙ ПРИРОДЫ." Будівельні матеріали та вироби, no. 1-2(101) (April 24, 2019): 48–51. http://dx.doi.org/10.48076/2413-9890.2020-101-09.
Full textAkimov, A. V. "ЗАСТОСУВАННЯ ДРІБНОЗЕРНИСТИХ НАПОВНЮВАЧІВ РІЗНОЇ ФІЗИЧНОЇ ПРИРОДИ ДЛЯ ПОКРАЩЕННЯ ФІЗИКО-МЕХАНІЧНИХ ВЛАСТИВОСТЕЙ КОМПОЗИТНИХ МАТЕРІАЛІВ НА ОСНОВІ ПЛАСТИФІКОВАНОЇ ЕПОКСИДНОЇ МАТРИЦІ." Scientific Bulletin of UNFU 25, no. 10 (December 29, 2015): 212–20. http://dx.doi.org/10.15421/40251032.
Full textПолоз, Олексій Ю., and Юрій Р. Ебіч. "ВПЛИВ ОЛІГОМЕРНИХ КАУЧУКІВ НА ПОЧАТКОВІ СТАДІЇ ФОРМУВАННЯ ЗНОСОСТІЙКИХ ЕПОКСИДНИХ КОМПОЗИЦІЙ." Journal of Chemistry and Technologies 29, no. 4 (January 21, 2022): 580–88. http://dx.doi.org/10.15421/jchemtech.v29i4.241644.
Full textДовгій, Ю. Ю., Д. В. Фещенко, Н. О. Рябцева, О. А. Згозінська, and В. А. Корячков. "Порівняльна ефективність знезаражування гною різних видів сільськогосподарських тварин реаґентами хімічної природи." Вісник Полтавської державної аграрної академії, no. 2 (June 28, 2013): 92–94. http://dx.doi.org/10.31210/visnyk2013.02.25.
Full textКоробка, А. В., Т. М. Рак, О. К. Бітлян, and Т. М. Конкс. "Технологія застосування преміксів різного складу у свинарстві." Вісник Полтавської державної аграрної академії, no. 3 (September 28, 2018): 122–26. http://dx.doi.org/10.31210/visnyk2018.03.18.
Full textТалімонова, Надія Леонідівна, and Ірина Омельченко. "Дослідження причин старіння архівних документів та способів їх стабілізації." Технологія і техніка друкарства, no. 3(73) (October 25, 2021): 19–30. http://dx.doi.org/10.20535/2077-7264.3(73).2021.244940.
Full textЗелінський, Сергій Сергійович. "ІНФОРМАЦІЙНО-ОСВІТНЄ СЕРЕДОВИЩЕ УНІВЕРСИТЕТУ: СТРУКТУРНО-ФУНКЦІОНАЛЬНА МОДЕЛЬ ПРОЦЕСУ НАВЧАННЯ ХІМІЇ." Науковий часопис НПУ імені М.П. Драгоманова. Серія 2. Комп’ютерно-орієнтовані системи навчання, no. 22(29) (February 20, 2020): 95–101. http://dx.doi.org/10.31392/npu-nc.series2.2020.22(29).13.
Full textКозар, С. Ф., and О. М. Білоконська. "ВПЛИВ АZOTOBACTER CHROOCOCCUM IMB B-7836 СУМІСНО З ПОЛІСАХАРИДНО-БІЛКОВИМ КОМПЛЕКСОМ НА УРОЖАЙНІСТЬ ОГІРКА." Вісник Полтавської державної аграрної академії, no. 4 (December 31, 2021): 79–84. http://dx.doi.org/10.31210/visnyk2021.04.09.
Full textRyabukha, O. I. "Вміст аскорбінової кислоти в печінці і надниркових залозах щурів при коригуванні аліментарного гіпотиреозу йодом різної хімічної природи." Medical and Clinical Chemistry, no. 1 (May 3, 2018). http://dx.doi.org/10.11603/mcch.2410-681x.2018.v0.i1.8841.
Full textDissertations / Theses on the topic "Наповнювач різної хімічної природи"
Берладір, Христина Володимирівна. "Антифрикційні матеріали на основі механоактивованих політетрафторетилену та наповнювачів." Thesis, КПІ ім. Ігоря Сікорського, 2017. https://ela.kpi.ua/handle/123456789/19665.
Full textThe thesis is devoted to creation of composites of tribotechnical appointment with the increased operational properties based on mechanically activated polytetrafluoroethylene and fillers of various chemical nature. An approach of preparation of a matrix and fillers of various chemical nature for obtaining PTFE-composites by the reasonable choice of a ratio of ingredients and technology of their modifying is offered. The optimum modes of process of mechanical activation of PTFE-matrix, fibrous and disperse fillers are set. Influence of technological parameters of process of mechanical activation on structure, physical and mechanical and tribotechnical properties of the PTFE-composite is studied. It is shown that under the influence of mechanical activation the ordered spherolitic supramolecular structure of matrix PTFE is formed which is characterized micro- and the nanoscale and leads to an increase in the thermal resistance of a modified polymer on (293–353) K. It is established that mechanical activation does not result in noticeable destruction of polytetrafluoroethylene molecular chain, but there are conformational changes which consist in an increase in concentration of the valent and finite CF2 groups that can lead to enhanced physical, mechanical and service properties of the polymer. It is revealed that the main factors that determine tribotechnical and physical and mechanical properties of PTFE are the time of activation and rotating speed of working organs of a mill. It is mathematically proved the practical experimental mode of mechanical activation at which operational characteristics of matrix PTFE are maximum (n = 9000 min.-1, τ = 5 min.). In comparison with non-activated polymer the level of breaking strength has grown by 2,6 times, relative elongation - by 4,3 times, wear resistances – by 1,86 times. Different technological methods of increasing the adhesive interaction between the ingredients of PTFE-composites are investigated. The prospects of using mechanical activation not only of the matrix but also fillers of various chemical nature for improving of operational characteristics of composites are shown. The determining factor of increase in a complex of operational properties of mechanically activated PTFE-composites is forming spherolitic composite structure under the influence of active particles of disperse layered fillers which playing a role of germs of crystallization and formation on a surface of fibers and coke of the interfacial layer of PTFE which contributes to the emergence of a stable spatial cluster of a filler in volume of a matrix of composition and allows to reach the maximum reinforcing effect, thereby, raising strengthening characteristics of the material and its wear resistance. It is revealed that introduction of a binary filler increases wear resistance of the developed composites by (2,6–4,1) times in comparison with two-component composites. The greatest increase in wear resistance at preservation of high values of physical and mechanical properties of PTFE-composites is watched at synergetic effect of application of mechanical activation of a matrix, fillers, their mixing by two-stage mode and use of a binary filler of various chemical nature. The feature of the developed manufacturing technology of PTFE-composites consists in preliminary separate preparation of a matrix and fillers before their mixing by mechanical activation at various modes of the equipment therefore there is an increase in level of their breaking strength by 1,4 times and wear resistances by (3,7–6,0) times in comparison with industrial analogs that increases durability of work of frictional units of the compressor by (1,8–2,3) times. Piston rings and packing seals of piston-type compressors 4ГМ 2,5 У-3,4/2,8-251 are made of developed PTFE-material that successfully passed industrial tests at LLC «Scientific and innovative enterprise SumyPlastPolymer» and they are not worse than the industry samples. Technological process of PTFE-composite production is developed.
Диссертация посвящена созданию композитов триботехнического назначения с повышенными эксплуатационными свойствами на основе механоактивированных ПТФЭ и наполнителей различной химической природы. Предложен подход подготовки матрицы и наполнителей различной химической природы для получения ПТФЭ-композитов путем обоснованного выбора соотношения ингредиентов и технологии их модифицирования. Установлены оптимальные режимы процесса механической активации матричного ПТФЭ, волокнистых и дисперсных наполнителей. Изучено влияние технологических параметров процесса механической активации на структуру, физико-механические и триботехнические свойства ПТФЭ-композита. Из разработанного ПТФЭ-композита изготовлены поршневые кольца и сальниковые уплотнения поршневых компрессоров 4ГМ 2,5 У–3,4/2,8–251, которые успешно прошли промышленные испытания на ООО «Научно-внедренческое предприятие СумыПластПолимер» и по эксплуатационным характеристикам не уступают промышленным образцам.