Dissertations / Theses on the topic 'Матеріали сировинні'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 22 dissertations / theses for your research on the topic 'Матеріали сировинні.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Яхненко, Сергій Михайлович, Сергей Михайлович Яхненко, Serhii Mykhailovych Yakhnenko, and С. О. Кривушенко. "Особенности выбора и подготовки сырья при производстве керамического кирпича." Thesis, Сумский государственный университет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/45634.
Full textБілоусов, Олег Юрійович. "Фільтрувальні композити на основі пороутворюючих матеріалів різного генезису." Thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/40818.
Full textThe thesis is devoted to the development of scientific bases of chemical technology of production of porous ceramic filter materials under conditions of expansion of raw material base, increase of operational reliability and competitiveness. Comprehensive solution of issues of industrial development, life support and environmental protection has necessitated the implementation of filtration and purification of air, gases and liquids using porous materials. At the same time, attention is paid to expanding the range of such materials, increasing the performance and operational reliability. Elements of porous ceramics, which were produced in Ukraine at the Slavyansky ceramic plant, became practically widespread in filtration and purification systems. However, the constant expansion of applications and technical requirements for porous ceramics requires further modernization of their technology based on the deepening of scientific ideas about the criteria for selecting raw materials, their physical and chemical properties and features of the structure of products. Known developments in the technology of porous ceramics are mainly based on the use of highly concentrated dispersed systems based on resource-intensive ceramic fireclay, made by high-temperature firing of refractory clays. The analysis of the filler as a factor influencing the formation of the structure and properties of the products is reduced to the variation of its particle size distribution. In most known developments, the structural characteristics of filter ceramics are limited by indicators of total or open porosity. The cleaning efficiency is associated with a decrease in pore diameter while reducing productivity. Further development of competitive national production, increasing the range and directions of use of porous ceramics are inextricably linked with the expansion of raw materials, development of new mass compositions, improvement of technological processes and equipment, absorption of scientific ideas about the connection composition - structure - properties in highly concentrated dispersed silicate systems. The aim of this work is to develop scientific and technical principles of national production of competitive porous ceramics waiting for cleaning, irrigation and aeration systems by expanding the raw material base, establishing patterns of formation of the pore structure of filter ceramics based on fillers of different genesis. A set of physicochemical and instrumental methods of analysis and standardized testing were used for research. Lyophilicity and wettability by polar and nonpolar liquid were evaluated by the improved technique of B.V. Deryagin. The structure and phase composition were determined using X-ray phase, electron microscopic and infrared methods of physicochemical analysis. Processing of experimental results was carried out using the methods of mathematical statistics. The composition, structure and surface properties of varieties of raw materials of artificial (ceramic fireclay) and natural (magmatic rocks) origin as the main raw material – fillers and man-made cutting additives for the manufacture of porous filter composites for multifunctional purposes have been studied. New rational compositions of porous ceramics based on raw materials of different genesis with differentiation of varieties and quantitative ratio of components, porous man-made additives and the degree of heat treatment have been created. Technological principles of application of initial materials of different genesis for production of elements of ceramics as filter composites taking into account an energy condition and lyophilicity of a surface of pore structure are developed. The design has been improved and the industrial production of porous ceramic elements for technical systems of aeration and water purification and soil irrigation has been made.
Лапа, О. А. "Сучасні матеріали для відмочування хутрової сировини." Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/4757.
Full textТуцька, С., Д. Шевченко, and Л. П. Гріщенко. "Нові джерела сировини для отримання целюлозних матеріалів." Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/4497.
Full textОхмат, О. А., М. О. Марухленко, Ю. В. Ліясова, and О. М. Головіна. "Формування споживчих властивостей натуральної шкіри в післядубильних процесах." Thesis, Вищий навчальний заклад Укоопспілки "Полтавський університет економіки і торгівлі" (ПУЕТ), 2019. https://er.knutd.edu.ua/handle/123456789/17416.
Full textБершеда, Н. А. "Експериментальні дослідження властивостей матеріалів для виробів-трансформерів." Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/11900.
Full textПостолатій, М. О., and М. С. Лемешев. "Техногенні промислові відходи виробництва – сировина для виготовлення будівельних виробів." Thesis, ВНТУ, 2018. http://ir.lib.vntu.edu.ua//handle/123456789/23729.
Full textAn analytical review of the use of industrial man-made waste ash - removals and red mud for the manufacture of construction products was carried out in this work. It was established that the use of fly ash and red bauxite slime in the technologies of building materials production improves the physico-chemical and rheological properties of the concrete mix.
Присяжна, Лариса Василівна, Олена Юріївна Федоренко, Костянтин Петрович Вернигора, and Лариса Вікторівна Руденко. "Перспективи використання глинистої сировини Великосироватського родовища для виготовлення щільноспечених будівельних матеріалів." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2011. http://repository.kpi.kharkov.ua/handle/KhPI-Press/46579.
Full textКрахмаль, Юлія Олександрівна. "Силікаткальцієві легковагі вироби, що отримані прямим твердофазовим синтезом з сировинних матеріалів України." Thesis, НТУ "ХПІ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/18486.
Full textThe thesis for a candidate’s degree of technical science on the speciality 05.17.11 – technology of hard-melting nonmetallic materials. – National Technical University "Kharkiv Polytechnic Institute", Kharkiv, 2015. The thesis is devoted to the development of calciumsilicate lightweight products technology, obtained by direct solid phase synthesis of raw materials Ukraine. The ration-al composition and technological parameters has been established, which provide calciumsilicate lightweight products with the apparent density 500 – 1000 kg/m³ and compressive strength limit 1,6–6,0 MPa. Is determined that high yield psevdowollastonite (up to 92 vol.%) formed by the use of combined lime contains material, consisting of chalk and gypsum at a ratio of 3: 1 in terms of CaO. Done thermodynamic analysis and the processes of phase formation during heat treatment in the composition of samples, including chalk, gypsum hemihydrate and quartz and pure calcium oxide and silicon with nonstoichiometrically ratio oxides CaO: SiO₂ (0,9) for the formation of wollastonite are investigated. It was established that the formation psevdowollastonite in a mixture of raw materials flows through the formation of intermediate compounds – larnite and β-wollastonite. Is determined that test samples of lightweight products characterized by a microporous structure. The products recommended for application at temperatures up to 1300 and 1250 °C. It is shown that the immutability the phase composition calciumsilicate lightweight products and exclusion of volume changes at polymorphic transformations wollastonite in psevdowollastonite during their service in the thermal aggregates is ensured by directed synthesis psevdowollastonite in products during their heat treatment. It was established that the thermal conductivity of test samples with microporous structure in the ~ 1,2–2,5 times less compared to macroporous chamotte lightweight products. Is de-termined that the developed products resistant to molten aluminum, and it is expedient recommended instead materials containing asbestos. Calciumsilicate lightweight products technology put into production in PJSC "The URIR named after A. S. Berezhnoy".
Захарченко, О. Г. "Організація обліку і аудиту виробничих запасів (на прикладі приватної виробничої фірми "Ресурс-К")." Master's thesis, Українська академія банківської справи Національного банку України, 2008. http://essuir.sumdu.edu.ua/handle/123456789/49695.
Full textГуміров, Едуард Ігорович, Людмила Павлівна Щукіна, and Станіслав Леонідович Лігезін. "Використання вуглевмісних промислових відходів у виробництві стінових керамічних матеріалів." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/42424.
Full textПашкевич, К. Л., О. В. Колосніченко, and А. В. Бабієнко. "Обгрунтований вибір лляних тканин для проектування швейних виробів різного асортименту." Thesis, Хмельницький національний університет, 2019. https://er.knutd.edu.ua/handle/123456789/15331.
Full textХолява, Олена Валеріївна, Лариса Борисівна Білоцька, and Світлана Юріївна Лозовенко. "Дослідження теплозахисних властивостей швейних виробів з перфорованої хутряної сировини." Thesis, Херсон : ХНТУ, 2016. https://er.knutd.edu.ua/handle/123456789/4515.
Full textБілецький, Володимир Стефанович, С. М. Стрекозов, Костянтин Леонідович Шпильовий, and Леонід Вікторович Шпильовий. "Інвестиційний потенціал Мазурівського родовища нефелінових сієнітів." Thesis, Державна комісія України по запасах корисних копалин, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/46683.
Full textThe state geological study Mazurivske deposits of nepheline syenites and perspectives to attract industrial development to obtain feldspar materials were considered.
Колонтаєва, Є. С., Тетяна Павлівна Говорун, Татьяна Павловна Говорун, and Tetiana Pavlivna Hovorun. "Прогресивна технологія термоциклічної обробки як один із методів підвищення властивостей матеріалу ножів для подрібнення сировини на біоенергетичний комплекс." Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39489.
Full textРассоха, Олексій Миколайович, Ганна Миколаївна Черкашина, and М. К. Черкашина. "Використання сумішей термопластичних полімерних матеріалів з твердих побутових відходів при виробництві полімерних композитів." Thesis, ТОВ "Центр екологічної освіти та інформації", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48812.
Full textПетрушка, І. М. "Науково-методологічні основи екологічно безпечних технологій очищенння стічних вод сорбентами мінерально-сировинної бази України." Thesis, Івано-Франківський національний технічний університет нафти і газу, 2013. http://elar.nung.edu.ua/handle/123456789/4636.
Full textДиссертация посвящена разработке научно-методологических основ экологически безопасных технологий очистки сточных вод от органических красителей, растворителей и радионуклидов сорбентами минерально-сырьевой базы Украины. В работе приведены теоретические и экспериментальные исследования процессов адсорбционной очистки жидкостных сред природными дисперсными сорбентами, методы модифицирования этих сорбентов в зависимости от необходимой степени их активации, а также рассмотрена перспективность использования жидкостной хроматографии для разделения многокомпонентной системы органических растворителей методом селективной адсорбции (промышленной хроматографии). Решенная научно-техническая проблема дала возможность разработать и внедрить высокоэффективные технологии очистки стоков, загрязненных красителями, органическими растворителями и радионуклидами. На основании теоретических и экспериментальных исследований процессов кислотного модифицирования бентонитов разработана классификация методов модифицирования природных сорбентов в зависимости от вида загрязнителя, а также рассчитаны адекватные математические модели, вычислены значения кинетических коэффициентов и предложены принципиальные технологические схемы реализации процессов. Разработанные теоретические основы моделирования процессов очистки сточных вод адсорбцией природными и модифицированными сорбентами. Предложены математические модели для прогнозирования лимитирующей стадии процесса сорбции на основании теории локальной изотропной турбулентности для аппаратов с механическими устройствами - при расчете внешнедиффузионных параметров, а также внутридиффузионных параметров с использованием теоретических расчетов эффективных коэффициентов внутренней диффузии. Исследована сорбция Сs и Sг с жидких радиоактивных отходов на модифицированных глинистых минералах и установлены оптимальные условия процесса. Доказано, что в случае применения модифицированных глинистых сорбентов не наблюдается вторичное загрязнение воды металлами-модификаторами. Проведена идентификация экспериментальных данных адсорбции радионуклидов существующим теоретическим изотермам сорбции. Исследованны аспекты использования жидкостной хроматографии в промышленных условиях для разделения смеси органических растворителей. Решения адсорбционной модели использованы для прогнозирования конкурентного равновесия адсорбции раствора и активного компонента подвижной фазы на основе изотерм адсорбции, а стандартные изотермы адсорбции определенные на основании дополнительных данных адсорбции, измеренных в инертной системе. Предложена принципиальная технологическая схема хроматографического разделения смеси органических растворителей. Основные результаты переданы для внедрения в производство и используются в учебном процессе.
On the basis of theoretical and experimental investigations of the acid modification bentonite developed adequate mathematical model, calculated values of the kinetic coefficients and the proposed process flow diagram the process. The theoretical basis of modeling processes of cleaning liquid media by adsorption of natural sorbents. The proposed mathematical model of the process to establish the rate-limiting step by calculating external diffusion parameters (based on the theory of locally isotropic turbulence for vehicles with mechanical devices) and internal diffusion parameters (using theoretical calculations of effective internal diffusion coefficient). Investigated the adsorption of Cs and Sr on the modified clay minerals and optimum process conditions. Proved that in the case of the modified clay adsorbents is observed secondary pollution of water modifier metal. Identified on the experimental data of adsorption of radionuclides existing theoretical sorption isotherms. Studied aspects of liquid chromatography in industrial conditions for separating a mixture of organic solvents. Solutions of the adsorption model used to predict the competitive equilibrium adsorption solution and the active component of the mobile phase on the basis of the adsorption isotherms, and the standard adsorption isotherms determined on the basis of additional data of adsorption measured in an inert system. A basic flow diagram of chromatographic separation of a mixture of organic solvents. Main results released for implementation in production and use in the classroom.
Дев'ятова, Наталя Борисівна, and Світлана Вікторівна Левадна. "Ресурсоощадні технології та застосування спеціальних цементів." Thesis, Національний технічний університет "Харківський політехнічний інститут", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/45081.
Full textБоброва, Світлана Юріївна, and Людмила Євгеніївна Галавська. "Міцність трикотажу спеціального призначення." Thesis, ХНТУ, 2017. https://er.knutd.edu.ua/handle/123456789/7859.
Full textАвілова, Орина Сергіївна. "Організація вхідного контролю імпортної сировини ПАТ «Дніпроспецсталь»." Магістерська робота, 2020. https://dspace.znu.edu.ua/jspui/handle/12345/3335.
Full textUA : Кваліфікаційна робота магістра “Організація вхідного контролю імпортної сировини ПАТ «Дніпроспецсталь» зумовлена зростанням собівартості продукції у зв’язку із підвищенням ціни на основні складові елементи – металобрухт, феросплави, енергоносії, появою нових підприємств, які використовують іноваційні технології у виробництві легованої сталі. Мета дослідження – проаналізувати систему закупівель та поставок імпортної сировини на підприємстві ПАТ “Дніпроспецсталь” та рекомендувати належну систему контролю. Об’єкт дослідження в дипломній роботі – Публічне акціонерне товариство “Дніпроспецсталь”. Предмет дослідження – господарська та зовнішньоекономічна діяльність підприємства ПАТ “Дніпроспецсталь” за період з 2014 по 2018 роки. В роботі використовувались дані публічної звітності підприємства, які розміщені на Інтернет-порталі smida.gov.ua, інформацію, яка отримана під час практики на підприємстві в процесі спостережень та аналізу звітності. Висновки, які зроблені у результаті дослідження виробничого процесу, структури постачання сировини та матеріалів на підприємство, надають підставу запропонувати схему організації вхідного контролю на основі аутсорсінгу експертних послуг з Запорізькою торгово-промисловою палатою, яка забезпечуватиме експертизу кількості (перевірка відповідності товару документам) та якості (засвідчення даних профільної експертизи якості та вмісту основної діючої сировини).
EN : Master's qualification work “Organization of input control of imported raw materials of PJSC“ Dneprospetsstal ”is conditioned by the increase in the cost of production in connection with the increase of the price for the main components - scrap metal, ferroalloys, energy carriers, the emergence of new enterprises that use innovative technologies in steelmaking. The purpose of the study is to analyze the system of purchases and deliveries of imported raw materials at the enterprise of PJSC “Dniprospetsstal” and to recommend a proper control system. The object of research in the diploma work is the Public Joint Stock Company "Dneprospetsstal". The subject of the study is the economic and foreign economic activity of the enterprise of PJSC “Dniprospetsstal” for the period from 2014 to 2018. The work used the public reporting data of the company, which is posted on the smida.gov.ua web portal, information that was obtained during the practice at the enterprise in the process of observations and analysis of the reporting. The conclusions drawn from the study of the production process, the structure of supply of raw materials to the enterprise, provide the basis to offer a scheme of organization of input control based on outsourcing of expert services with the Zaporozhye Chamber of Commerce, which will provide expertise of quantity (checking the conformity of goods with documents) and quality (certification of the profile examination data of the quality and content of the main active raw material).
Кучеренко, Єлизавета Володимирівна. "Розробка технології одержання високоеластичних волокнистих матеріалів із вторинної сировини." Diss., 2020. https://er.knutd.edu.ua/handle/123456789/17858.
Full textThe dissertation is devoted to the relevant problem of expanding the range of nonwovens from a mixture of chemical fibers for products of different purposes, in particular for obtaining highly elastic materials for thermal insulation of objects with complex geometric shape.
Чабан, Наталія Андріївна. "Облік наявності і руху сировини і матеріалів, контроль і аналіз ефективності їх використання (на прикладі ТзОВ «Тернопільхлібпром»)." Master's thesis, 2021. http://elartu.tntu.edu.ua/handle/lib/36548.
Full textIn the work the author investigates and generalizes the features of operations on accounting, control and analysis of raw materials at the enterprises of the bakery industry. The essence of raw materials as economic categories and objects of accounting, approaches to their classification, recognition and evaluation under different conditions of their use are revealed. The organizational and methodological aspects of the reflection of operations with raw materials and materials in the accounting system are generalized. Particular attention is paid to control procedures for their presence and movement. A detailed analysis of the structure of raw materials and materials of the studied LLC "Ternopilkhlibprom", the needs of the enterprise with this type of stocks. The estimation of efficiency of use of material resources is made and its influence on formation of effective indicators of activity of the enterprise is defined. The assessment of the organization of labor protection at the enterprise and the organization of safety in case of emergency is given.
ВСТУП 5 РОЗДІЛ 1 ТЕОРЕТИЧНІ ПЕРЕДУМОВИ ОБЛІКУ І КОНТРОЛЮ СИРОВИНИ ТА МАТЕРІАЛІВ 8 1.1. Сутність та зміст понять «виробничі запаси» та «сировина і матеріали» як об’єктів обліку, аналізу та аудиту 8 1.2. Характеристика фінансово-господарської діяльності ТзОВ «Тернопільхлібпром» 15 Висновки до розділу 1 20 РОЗДІЛ 2 ОРГАНІЗАЦІЯ ТА МЕТОДИКА ОБЛІКУ СИРОВИНИ ТА МАТЕРІАЛІВ ТА КОНТРОЛЬ ЗА ЇЇ НАЯВНІСТЮ 21 2.1. Організація облікового, аналітичного та контрольного процесів за наявністю та рухом сировини і матеріалів 21 2.2. Особливості обліку наявності та руху сировини та матеріалів на підприємстві 27 2.3. Аудит сировини та матеріалів на підприємстві 33 Висновки до розділу 2 37 РОЗДІЛ 3 ОЦІНКА ЕФЕКТИВНОСТІ ВИКОРИСТАННЯ ВИРОБНИЧИХ ЗАПАСІВ ТА ЇХ ВПЛИВ НА ФОРМУВАННЯ РЕЗУЛЬТАТИВНИХ ПОКАЗНИКІВ ДІЯЛЬНОСТІ ТЗОВ «ТЕРНОПІЛЬХЛІБПРОМ» 39 3.1. Аналіз забезпеченості підприємства сировиною та матеріалами та оцінка ефективності їх використання 39 3.2. Оцінка ділової активності та результативних показників діяльності ТзОВ «Тернопільхлібпром» 48 Висновки до розділу 3 54 РОЗДІЛ 4 ОХОРОНА ПРАЦІ ТА ЦИВІЛЬНИЙ ЗАХИСТ 56 4.1. Оцінка стану охорони праці на ТзОВ «Тернопільхлібпром» 56 4.2. Розроблення і реалізація заходів щодо захисту працівників суб’єкта господарювання (підприємства, цеху, дільниці) від наслідків НС. 58 ВИСНОВКИ ТА ПРОПОЗИЦІЇ 61 ДОДАТКИ 64 СПИСОК ВИКОРИСТАНИХ ДЖЕРЕЛ 64