Academic literature on the topic 'Коефіцієнт проходження'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Коефіцієнт проходження.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Коефіцієнт проходження"
Kuleshnyk, Ya F., V. V. Senyk, and T. V. Maherovska. "Використання статистичних методів для створення когнітивних тестових завдань." Scientific Bulletin of UNFU 28, no. 8 (October 25, 2018): 122–28. http://dx.doi.org/10.15421/40280824.
Full textБольшаніна, Світлана Борисівна, Тетяна Василівна Диченко, and Надія Натанівна Чайченко. "ЗАСТОСУВАННЯ ПЛАТФОРМИ MIX ДЛЯ ОРГАНІЗАЦІЇ ЗМІШАНОГО НАВЧАННЯ ЗАГАЛЬНОЇ ХІМІЇ ЗДОБУВАЧІВ ІНЖЕНЕРНИХ СПЕЦІАЛЬНОСТЕЙ." Information Technologies and Learning Tools 75, no. 1 (February 24, 2020): 138–52. http://dx.doi.org/10.33407/itlt.v75i1.2577.
Full textУдовицька Ю.А., Луньов С.В., Кашицький В.П.,, and Назарчук П.Ф. "РОЗРАХУНОК ВТРАТ ЕНЕРГІЇ ШВИДКИХ ЕЛЕКТРОНІВ ПРИ ПРОХОДЖЕННІ ЧЕРЕЗ ЕПОКСИКОМПОЗИТ." Перспективні технології та прилади, no. 16 (August 31, 2020): 141–48. http://dx.doi.org/10.36910/6775-2313-5352-2020-16-20.
Full textПІВТОРАК, Галина, Віктор ГОЛОМОВЗИЙ, and Мар’яна ЖИЛА. "ОЦІНКА ВПЛИВУ ЗМІНИ ПАРАМЕТРІВ ФУНКЦІЇ ПЕРЕВАГИ НА РОЗПОДІЛ ПОПИТУ НА ПЕРЕМІЩЕННЯ МІЖ ТРАНСПОРТНИМИ РАЙОНАМИ МІСТА." СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ 2, no. 15 (November 27, 2020): 118–26. http://dx.doi.org/10.36910/automash.v2i15.399.
Full textGlyva, V., О. Khodakovskyy, and L. Levchenko. "ЗАСАДИ ПРОЕКТУВАННЯ ОБЛИЦЮВАЛЬНИХ МАТЕРІАЛІВ ГРАДІЄНТНОГО ТИПУ ДЛЯ ЕКРАНУВАННЯ ЕЛЕКТРОМАГНІТНИХ ПОЛІВ." Системи управління, навігації та зв’язку. Збірник наукових праць 3, no. 61 (September 11, 2020): 111–14. http://dx.doi.org/10.26906/sunz.2020.3.111.
Full textBondarenko (Rassomagina), Maria, Alexander Bondarenko, Victoriya Kravchenko, and Mukola Makarchuk. "ЕЕГ аналіз розподілу уваги в лівшів та правшів при проходженні емоційного Струп-тесту на фоні пред’явлення зображень IAPS." Lesya Ukrainka Eastern European National University Scientific Bulletin. Series: Biological Sciences, no. 12 (November 23, 2018): 134–43. http://dx.doi.org/10.29038/2617-4723-2015-313-134-143.
Full textSemenenko, S. I., A. I. Semenenko, R. G. Redkin, and I. F. Semenenko. "Оцінка молекулярної мішені адемолу методом хемоінформатики." EMERGENCY MEDICINE 17, no. 7 (January 5, 2022): 37–41. http://dx.doi.org/10.22141/2224-0586.17.7.2021.244593.
Full textSolomenchuk, T. M., V. L. Lutska, and N. B. Kuz. "ЕФЕКТИВНІСТЬ КАРДІОРЕАБІЛІТАЦІЙНОГО ЛІКУВАННЯ ПАЦІЄНТІВ ПІСЛЯ ПЕРЕНЕСЕНОГО ГОСТРОГО КОРОНАРНОГО СИНДРОМУ ЗАЛЕЖНО ВІД СТАТУСУ КУРЦЯ." Здобутки клінічної і експериментальної медицини, no. 3 (September 29, 2020): 148–57. http://dx.doi.org/10.11603/1811-2471.2020.v.i3.11597.
Full textКислова, Марія Алімівна, and Катерина Іванівна Словак. "Використання хмарних офісних засобів у викладанні вищої математики." Theory and methods of e-learning 4 (February 28, 2014): 115–21. http://dx.doi.org/10.55056/e-learn.v4i1.379.
Full textЗдещиц, Валерий Максимович. "Вимірювання сенсомоторної реакції учнів як засіб вдосконалення процесу їх навчання." Theory and methods of e-learning 2 (February 3, 2014): 272–80. http://dx.doi.org/10.55056/e-learn.v2i1.286.
Full textDissertations / Theses on the topic "Коефіцієнт проходження"
Кошель, О. С., and І. П. Маніло. "Дослідження ультразвукового методу контролю товщини різних матеріалів." Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/13768.
Full textЩербина, А. В. "Дослідження контролю автоматизованого змішування речовин із використанням ультразвукових датчиків." Thesis, Київський національний університет технологій та дизайну, 2017. https://er.knutd.edu.ua/handle/123456789/8296.
Full textЛозінський, Владислав Валентинович. "Моделювання звукопровідної системи середнього вуха людини в Comsol." Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/33851.
Full textThe study of the auditory properties of the human auditory system is an urgent problem today, because healthy hearing is the key to a normal life. Among the objective methods, such as impedancemetry, research is performed using a pneumatic system, which makes it impossible to perform the procedure for infants. That is why the study is based on an echo spectrometer, which is an improved objective method without the use of a pneumatic system and with a simple measurement and processing procedure to expand the age group and improve the accuracy of the results. With a wide range of opportunities for the diagnosis of hearing, almost nothing is known about the acoustic characteristics of the human sound system, for decades, scientists have been studying the middle ear. The use of prostheses for the reconstruction of the ear in case of damage to its hearing organs has also become widely used. However, it is difficult to say how effective these methods are. Therefore, this work is devoted to modeling the sound conduction system, substitute, comparing these models and evaluating the effectiveness of the proposed method of hearing diagnosis. The main task is to obtain the transmittance, which will answer the question of how the sound system behaves and how effective prostheses are for the reconstruction of hearing.
Палій, Богдан Максимович. "Ультразвуковий засіб технологічного контролю поверхневої густини тканин." Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/38417.
Full textIn this master's dissertation an analytical study of the ultrasonic means of technological control of tissue surface density. The analysis showed that to ensure the release of quality fabrics it is necessary to carry out operational technological control of their surface density. Currently, mainly destructive contact methods of tissue surface density control are used, which are based on cutting and weighing tissue samples, while non-contact ones are not used, although they have a number of significant advantages over contact ones. As shown by the analysis conducted in the first section of the dissertation, for the operational technological control of tissue surface density, it is advisable to use ultrasonic control methods. The second section of the dissertation discusses the peculiarities of the propagation of ultrasonic waves in tissues, which are related to the pore size and other structural parameters of tissues that affect the passage of ultrasonic waves through the tissue and reflection from it. A study of the passage of ultrasonic waves through controlled tissues with different pore sizes and reflections from them and obtained analytical dependences for the calculation and analysis of the interaction of ultrasonic waves with tissue threads with different acoustic resistances. Analytical dependences are obtained, which relate the amplitude ratios of ultrasonic waves both with the change of the diameters of the warp and weft threads, and directly with the surface density of the fabric. It has been shown that the attenuation of ultrasonic vibrations can be neglected for most tissues, and the choice of the ratio of the bulk density of the tissue and the length of the ultrasonic wave in the fabric can reduce the effect of attenuation on the amplitude ratio of ultrasonic waves. It is shown that as the duration of the ultrasonic pulse signal increases, the amplitude and phase errors decrease in comparison with the continuous signal. Therefore, it is necessary to choose the duration of the ultrasonic pulse signal so that there are no reflections of ultrasonic waves from the surface of the fabric and the surfaces of the piezoelectric transducers. In the third development of ultrasonic means of technological control of surface density of fabrics and its experimental researches is carried out.