Academic literature on the topic 'Ковпачок'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Contents
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ковпачок.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Ковпачок"
ВЕРЕТЮК, Тетяна. "ФІЛОСОФІЯ ФЕМІНІЗМУ В РОМАНІ СИЛЬВІЇ ПЛАТ «ПІД СКЛЯНИМ КОВПАКОМ»." Humanities science current issues 1, no. 29 (August 3, 2020): 48–54. http://dx.doi.org/10.24919/2308-4863.1/29.209280.
Full textСоловій, С. Р., and Н. М. Гриців. "ЗОБРАЖЕННЯ ПСИХОЛОГІЧНОЇ АЛІЄНАЦІЇ В РОМАНІ СИЛЬВІЇ ПЛАТ «ПІД СКЛЯНИМ КОВПАКОМ»: ОСОБИСТІСНИЙ ПІДХІД." Nova fìlologìâ 2, no. 81 (June 23, 2021): 130–35. http://dx.doi.org/10.26661/2414-1135-2021-81-2-19.
Full textІщенко, П. В. "КРИТЕРІЇ ОЦІНКИ ТА КЛІНІЧНІ ХАРАКТЕРИСТИКИ СТАНУ СЛИЗОВОЇ ОБОЛОНКИ ПОРОЖНИНИ РОТА І ПАРОДОНТА ПРИ ЗУБНОМУ ПРОТЕЗУВАННІ У ПАЦІЄНТІВ, ЩО СТРАЖДАЮТЬ НА ГЕНЕРАЛІЗОВАНИЙ ПАРОДОНТИТ У СТАДІЇ СТАБІЛІЗАЦІЇ." Інновації в стоматології, no. 1 (December 28, 2020): 42–45. http://dx.doi.org/10.35220/2523-420x/2020.1.9.
Full textПавленко, Д. Г. "TRAVELING INWARD IN SEARCH OF GENDER BALANCE IN THE NOVEL “THE BELL JAR” BY S. PLATH." Studia Philologica, no. 12 (2019): 120–26. http://dx.doi.org/10.28925/2311-2425.2019.12.17.
Full textBratus-Hrynkiv, R. R. "Критерії діагностики та принципи планування конструкції покривного протеза у пацієнтів із поодиноко збереженими зубами на нижній щелепі." Clinical Dentistry, no. 4 (January 25, 2019): 56–62. http://dx.doi.org/10.11603/2311-9624.2018.4.9752.
Full textDissertations / Theses on the topic "Ковпачок"
Чайківський, Костянтин Вікторович. "Модернізація установки ректифікації водяно-метилової суміші з розробкою ректифікаційної колони та холодильника." Master's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/31599.
Full textThe explanatory note consists of an introduction, eight sections, conclusions and a list of links of 36 titles. The total volume of the note is 180 pages, including 121 pages of the main text, 36 figures, 33 tables. In the work the technological process for the production of methyl alcohol is described with the development of a distillation column and a refrigerator The note contains a description of the technological process, a choice of the type of apparatus, their place in the technological scheme, technical characteristics of the apparatus, the rationale for the choice of apparatus designs designed and the principle of operation of their main assembly units and parts, a comparison of the main indicators of the developed apparatus design with analogues, patent research of apparatus designs. Occupational safety measures, recommendations for installation and operation are given. The installation was modernized and a startup project was developed. Calculations are carried out confirming the operability and reliability of the distillation column and refrigerator designs. The level of standardization and unification is defined. An automatic process control circuit has been developed.
Пояснительная записка состоит из введения, восьми глав, заключения и списка ссылок из 36 наименований. Общий объем записки составляет 180 страниц, из них 121 страниц основного текста, 36 рисунков, 33 таблиц. Цель магистерской диссертации - модернизация установки ректификации водно-метиловой смеси с разработкой ректификационной колонны и холодильника. Записка содержит описание технологического процесса, выбор типа аппаратов, их место в технологической схеме, техническую характеристику аппаратов, обоснование выбора конструкций аппаратов, проектируемых и принцип действия их основных сборочных единиц и деталей, сравнение основных показателей разработанной конструкции аппаратов с аналогами, патентное исследование конструкций аппаратов . Приведены мероприятия по охране труда, рекомендации по монтажу и эксплуатации. Проведена модернизация установки и разработано стартап проект. Проведены расчеты, подтверждающие работоспособность и надежность конструкций ректификационной колонны и холодильника. Определен уровень стандартизации и унификации. Разработан автоматическую схему управлением процессом.
Брик, В. В. "Розробка функціонального графу маніпулятора зміни шпульного ковпачка зі шпулькою багатоголкових вишивальних машин-автоматів після закінчення нитки." Thesis, Київський національний університет технологій та дизайну, 2017. https://er.knutd.edu.ua/handle/123456789/8572.
Full textЗахарків, Олександр Миколайович, and Oleksandr Zakharkiv. "Розроблення технології виготовлення деталей: ковпачок регулятора 12707010099, штуцер 95.00.352, гніздо пробки 3170707009 з дослідженням закономірностей формування теплових потоків в зоні різання при точінні." Master's thesis, 2020. http://elartu.tntu.edu.ua/handle/lib/33981.
Full textIn qualifying paper are development of some parts production process: regulating device cap 12707010099, pipe connection 95.00.352, lug seat 3170707009 and special machine-tool fixtures for their realization are designed. Engineering solutions made in qualifying paper provided the possibility to increase part manufacturing quality and minimize operation setting-up time, ensured operations concentration and reduction in manufacturing prime cost. To secure staff working environment the comprehensive operational health and safety issues for emergencies is developed. Theoretical generalization and decision of scientific task, that consists in study of the heat generation process during turning operations.
ВСТУП 1. АНАЛІТИЧНА ЧАСТИНА 1.1 Аналіз стану питання за літературними та іншими джерелами. Актуальність теми роботи 1.2 Методи вирішення поставлених задач 1.3 Висновки та постановка задач на кваліфікаційну роботу 2 НАУКОВО-ДОСЛІДНА ЧАСТИНА 2.1 Характеристика об’єкту або предмету дослідження 2.2 Оброблення результатів досліджень 2.3 Аналіз і узагальнення отриманої інформації 2.4 Висновки та пропозиції щодо використання результатів виконаних досліджень 3 ТЕХНОЛОГІЧНО-КОНСТРУКТОРСЬКА ЧАСТИНА 3.1 Службове призначення та характеристики об’єкту виробництва 3.2 Розроблення технологічного процесу виготовлення виробу 3.3 Визначення кількості обладнання 3.4 Конструювання спеціального оснащення та інструменту 4 ПРОЄКТНА ЧАСТИНА 4.1 Визначення основних і допоміжних площ цеху 4.2 Розробка планів компонування цеху та розміщення обладнання на дільниці 5 ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ 5.1 Охорона праці 5.2 Безпека в надзвичайних ситуаціях ВИСНОВКИ ПЕРЕЛІК ПОСИЛАНЬ ДОДАТКИ