Contents
Academic literature on the topic 'Архітектура комп'ютерної системи'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Архітектура комп'ютерної системи.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Архітектура комп'ютерної системи"
ХОМЕНКО, Віталій, Марія СКУРСЬКА, and Катерина СТАРОСТЕНКО. "РОЗРОБКА МОДЕЛІ ЗМІСТУ НАВЧАННЯ АРХІТЕКТУРИ ЕОМ СТУДЕНТІВ ІНЖЕНЕРНО-ПЕДАГОГІЧНОГО ПРОФІЛЮ." Scientific papers of Berdiansk State Pedagogical University Series Pedagogical sciences 3 (December 2020): 405–18. http://dx.doi.org/10.31494/2412-9208-2020-1-3-405-418.
Full textPitukh, I. R., and N. Ya Vozna. "Способи організації руху моніторингових, інтерактивних і діалогових даних у структурах розподілених комп'ютерних систем." Scientific Bulletin of UNFU 31, no. 3 (April 29, 2021): 101–8. http://dx.doi.org/10.36930/40310316.
Full textТеслюк, В. М., А. Г. Казарян, and І. Я. Казимира. "Опрацювання даних у системах "розумного" будинку з використанням моделей на підставі мереж Петрі." Scientific Bulletin of UNFU 31, no. 1 (February 4, 2021): 131–36. http://dx.doi.org/10.36930/40310122.
Full textKimak, V. L. "АРХІТЕКТУРА СПЕЦПРОЦЕСОРА ШИФРУВАННЯ ДАНИХ У ТЕОРЕТИКО-ЧИСЛОВОМУ БАЗИСІ РАДЕМАХЕРА-КРЕСТЕНСОНА." Scientific Bulletin of UNFU 25, no. 9 (November 25, 2015): 278–84. http://dx.doi.org/10.15421/40250944.
Full textЛевченко, Андрей, and Алексей Головко. "УРОВЕНЬ АРХИТЕКТУРЫ МИКРОКОМАНД С ДЛИННОЙ ДВОИЧНОЙ АРИФМЕТИКОЙ ДЛЯ КОМПЬЮТЕРНОЙ СИСТЕМЫ ВЫСОКОТОЧНЫХ ВЫЧИСЛЕНИЙ." SWorldJournal, no. 06-01 (December 30, 2018): 85–90. http://dx.doi.org/10.30888/2663-5712.2020-06-01-045.
Full textЛевченко, Андрей, and Алексей Головко. "УРОВЕНЬ АРХИТЕКТУРЫ МИКРОКОМАНД С ДЛИННОЙ ДВОИЧНОЙ АРИФМЕТИКОЙ ДЛЯ КОМПЬЮТЕРНОЙ СИСТЕМЫ ВЫСОКОТОЧНЫХ ВЫЧИСЛЕНИЙ." SWorldJournal, no. 06-01 (December 30, 2018): 85–90. http://dx.doi.org/10.30888/2410-6615.2020-06-01-045.
Full textKuchuk, N., V. Panchenko, A. Filonenko, and I. Petrovskaya. "РІВНОМІРНИЙ РОЗПОДІЛ РЕСУРСІВ КОМП'ЮТЕРНИХ СИСТЕМ, ЩО МАЮТЬ ГІПЕРКОНВЕРГЕНТНУ ІНФРАСТРУКТУРУ." Системи управління, навігації та зв’язку. Збірник наукових праць 2, no. 54 (April 11, 2019): 119–22. http://dx.doi.org/10.26906/sunz.2019.2.119.
Full textMochurad, L. I., and N. I. Boyko. "Використання технології OpenMp для розрахунку електростатичного поля систем електронної оптики." Scientific Bulletin of UNFU 29, no. 3 (April 25, 2019): 125–28. http://dx.doi.org/10.15421/40290326.
Full textСтецюк, В. З., А. М. Чиж, Л. Ю. Бабінцева, М. В. Чиж, and І. П. Муха. "СИСТЕМА ДЛЯ ОБЛІКУ ДОНОРСЬКОЇ КРОВІ ТА ЇЇ КОМПОНЕНТІВ." Medical Informatics and Engineering, no. 4 (June 4, 2020): 62–64. http://dx.doi.org/10.11603/mie.1996-1960.2019.4.11020.
Full textСтецюк, В. З., Л. Ю. Бабінцева, Т. П. Іванова, Г. М. Федушка, Ю. М. Чиж, and І. П. Муха. "СИСТЕМА ОБЛІКУ ТА СТАТИСТИЧНОГО АНАЛІЗУ ДАНИХ ПРО ПАЦІЄНТІВ ІЗ ДІАГНОЗОМ ЕПІЛЕПСІЯ." Medical Informatics and Engineering, no. 1 (June 22, 2020): 66–70. http://dx.doi.org/10.11603/mie.1996-1960.2020.1.11130.
Full textDissertations / Theses on the topic "Архітектура комп'ютерної системи"
Бурлєєв, Олег Леонідович. "Вдосконалення фотоелектричних перетворювачів переміщень в комп'ютерних системах контролю кутових параметрів літака." Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/19580.
Full textThesis for scientific the Degree candidate of technical sciences in the specialty 05.13.05 - computer systems and components. - National Technical University "Kharkov Polytechnic Institute", Kharkiv, 2016. The dissertation is devoted to solving scientific and applied tasks of efficiency rising measuring and control processes of angular displacement the aircraft steering surfaces. The methods for photoelectric measuring the angular displacement the aircraft steering surfaces are improved and functional schemes of devices that implement them. The algorithmic tools and software that implements optimization multivariate experiments plans using branch and bound method is developed. The optimal parameters in term of uniform distribution of optical fiber butt ends the angular displacement photoelectric converters with application of mirror are found. First synthesized mathematical models of work the photoelectric converter the aircraft surface steering angle in each control point of the measuring range, which allow to increase accuracy photovoltaic 1' and adapt sensitivity of the measuring device to the design features the aircraft steering surfaces. The architecture of the computer system angular displacement steering control surfaces of the aircraft is and developed.
Паржин, Юрій Володимирович. "Моделі і методи побудови архітектури і компонентів детекторних нейроморфних комп'ютерних систем." Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/34755.
Full textDissertation for the degree of Doctor of Technical Sciences in the specialty 05.13.05 – Computer systems and components. – National Technical University "Kharkiv Polytechnic Institute", Ministry of Education and Science of Ukraine, Kharkiv, 2018. The thesis is devoted to solving the problem of increasing the efficiency of building and using neuromorphic computer systems (NCS) as a result of developing models for constructing their components and a general architecture, as well as methods for their training based on the formalized detection principle. As a result of the analysis and classification of the architecture and components of the NCS, it is established that the connectionist paradigm for constructing artificial neural networks underlies all neural network implementations. The detector principle of constructing the architecture of the NCS and its components was substantiated and formalized, which is an alternative to the connectionist paradigm. This principle is based on the property of the binding of the elements of the input signal vector and the corresponding weighting coefficients of the NCS. On the basis of the detector principle, multi-segment threshold information models for the components of the detector NCS (DNCS): block-detectors, block-analyzers and a novelty block were developed. As a result of the developed method of counter training, these components form concepts that determine the necessary and sufficient conditions for the formation of reactions. The method of counter training of DNCS allows reducing the time of its training in solving practical problems of image recognition up to one epoch and reducing the dimension of the training sample. In addition, this method allows to solve the problem of stability-plasticity of DNCS memory and the problem of its overfitting based on self-organization of a map of block-detectors of a secondary level of information processing under the control of a novelty block. As a result of the research, a model of the network architecture of DNCS was developed, which consists of two layers of neuromorphic components of the primary and secondary levels of information processing, and which reduces the number of necessary components of the system. To substantiate the increase in the efficiency of constructing and using the NCS on the basis of the detector principle, software models were developed for automated monitoring and analysis of the external electromagnetic environment, as well as recognition of the manuscript figures of the MNIST database. The results of the study of these systems confirmed the correctness of the theoretical provisions of the dissertation and the high efficiency of the developed models and methods.
Паржин, Юрій Володимирович. "Моделі і методи побудови архітектури і компонентів детекторних нейроморфних комп'ютерних систем." Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/34756.
Full textDissertation for the degree of Doctor of Technical Sciences in the specialty 05.13.05 – Computer systems and components. – National Technical University "Kharkiv Polytechnic Institute", Ministry of Education and Science of Ukraine, Kharkiv, 2018. The thesis is devoted to solving the problem of increasing the efficiency of building and using neuromorphic computer systems (NCS) as a result of developing models for constructing their components and a general architecture, as well as methods for their training based on the formalized detection principle. As a result of the analysis and classification of the architecture and components of the NCS, it is established that the connectionist paradigm for constructing artificial neural networks underlies all neural network implementations. The detector principle of constructing the architecture of the NCS and its components was substantiated and formalized, which is an alternative to the connectionist paradigm. This principle is based on the property of the binding of the elements of the input signal vector and the corresponding weighting coefficients of the NCS. On the basis of the detector principle, multi-segment threshold information models for the components of the detector NCS (DNCS): block-detectors, block-analyzers and a novelty block were developed. As a result of the developed method of counter training, these components form concepts that determine the necessary and sufficient conditions for the formation of reactions. The method of counter training of DNCS allows reducing the time of its training in solving practical problems of image recognition up to one epoch and reducing the dimension of the training sample. In addition, this method allows to solve the problem of stability-plasticity of DNCS memory and the problem of its overfitting based on self-organization of a map of block-detectors of a secondary level of information processing under the control of a novelty block. As a result of the research, a model of the network architecture of DNCS was developed, which consists of two layers of neuromorphic components of the primary and secondary levels of information processing, and which reduces the number of necessary components of the system. To substantiate the increase in the efficiency of constructing and using the NCS on the basis of the detector principle, software models were developed for automated monitoring and analysis of the external electromagnetic environment, as well as recognition of the manuscript figures of the MNIST database. The results of the study of these systems confirmed the correctness of the theoretical provisions of the dissertation and the high efficiency of the developed models and methods.
Коваленко, Андрій Анатолійович. "Моделі та методи синтезу і реконфігурації архітектур комп'ютерних систем і мереж об'єктів критичного застосування." Thesis, Харківський національний університет радіоелектроніки, 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37690.
Full textDissertation for the degree of Doctor of Technical Sciences in the specialty of 05.13.05 – Computer Systems and Components. – Kharkiv National University of Radio Electronics, National Technical University "Kharkiv Polytechnic Institute", Ministry of Education and Science of Ukraine, Kharkiv, 2018. The thesis is devoted to solving of actual scientific and applied problem of ensuring the operativeness requirements for information exchange process in computer systems (CS) of critical application objects (CAO) on the basis of mathematical apparatus (mathematical models and methods) development intended for synthesis of new and reconfiguration of existing architectures of computer systems and networks. It was performed an analysis of the problem, appropriate trends of CAO CS, as well as the requirements for architectures of CAO CS and networks. The results revealed that currently existing models intended for synthesis and reconfiguration of CAO CS does not always lead to meet the operativity requirements for the process of information exchange in CAO CS and networks (CSN). This circumstance determines the need to improve the corresponding classical mathematical tools to increase the operativity of information transmission. It was developed a complex of methods for multiparameter synthesis of CAO CSN that optimizes the costs of constructing components of the critical application object CS, which ensure the meeting of operativity requirements. It was developed a further improvement for the model of tasks distribution process within the components of distributed CAO CS that allows significant accelerating the solution of the optimization problem in a case of large dimensions. It was developed a complex of evolution models for CAO computer networks (CN) that allows executing the prediction of network architecture changes during a fixed time interval. It was developed a complex of reconfiguration methods for CAO CN that allows adjusting the set of operation parameters of wireless components of the network in order to reduce the time of information transmission. It was improved a mathematical model describing the operation of CAO CN cloud component that allows accelerating the process of information transmission. It was improved a method of optimal time scales constructing for approximating the length of CAO CN queues that allows determining the length of queues during network reconfiguration. It was improved a method for information transmission in a wireless segment of CAO CN that allows reducing the time of information transmission.
Коваленко, Андрій Анатолійович. "Моделі та методи синтезу і реконфігурації архітектур комп'ютерних систем і мереж об'єктів критичного застосування." Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37686.
Full textDissertation for the degree of Doctor of Technical Sciences in the specialty of 05.13.05 – Computer Systems and Components. – Kharkiv National University of Radio Electronics, National Technical University "Kharkiv Polytechnic Institute", Ministry of Education and Science of Ukraine, Kharkiv, 2018. The thesis is devoted to solving of actual scientific and applied problem of ensuring the operativeness requirements for information exchange process in computer systems (CS) of critical application objects (CAO) on the basis of mathematical apparatus (mathematical models and methods) development intended for synthesis of new and reconfiguration of existing architectures of computer systems and networks. It was performed an analysis of the problem, appropriate trends of CAO CS, as well as the requirements for architectures of CAO CS and networks. The results revealed that currently existing models intended for synthesis and reconfiguration of CAO CS does not always lead to meet the operativity requirements for the process of information exchange in CAO CS and networks (CSN). This circumstance determines the need to improve the corresponding classical mathematical tools to increase the operativity of information transmission. It was developed a complex of methods for multiparameter synthesis of CAO CSN that optimizes the costs of constructing components of the critical application object CS, which ensure the meeting of operativity requirements. It was developed a further improvement for the model of tasks distribution process within the components of distributed CAO CS that allows significant accelerating the solution of the optimization problem in a case of large dimensions. It was developed a complex of evolution models for CAO computer networks (CN) that allows executing the prediction of network architecture changes during a fixed time interval. It was developed a complex of reconfiguration methods for CAO CN that allows adjusting the set of operation parameters of wireless components of the network in order to reduce the time of information transmission. It was improved a mathematical model describing the operation of CAO CN cloud component that allows accelerating the process of information transmission. It was improved a method of optimal time scales constructing for approximating the length of CAO CN queues that allows determining the length of queues during network reconfiguration. It was improved a method for information transmission in a wireless segment of CAO CN that allows reducing the time of information transmission.
Цьока, Любомир Романович. "Архітектура комп’ютерної системи жестового керування квадрокоптером." Master's thesis, 2019. http://elartu.tntu.edu.ua/handle/lib/29879.
Full textBooks on the topic "Архітектура комп'ютерної системи"
I International Scientific and Practical Conference «EDUCATION AND SCIENCE OF TODAY: INTERSECTORAL ISSUES AND DEVELOPMENT OF SCIENCES». Cambridge Data Science LTD & European Scientific Platform, 2021. http://dx.doi.org/10.36074/logos-19.03.2021.
Full text