Relevant bibliographies by topics / Α-MgAgSb / Journal articles

Journal articles on the topic 'Α-MgAgSb'

To see the other types of publications on this topic, follow the link: Α-MgAgSb.
Author: Grafiati
Published: 23 September 2022
Last updated: 5 November 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 26 journal articles for your research on the topic 'Α-MgAgSb.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Camut, Julia, Ignacio Barber Rodriguez, Hasbuna Kamila, Aidan Cowley, Reinhard Sottong, Eckhard Mueller, and Johannes de Boor. "Insight on the Interplay between Synthesis Conditions and Thermoelectric Properties of α-MgAgSb." Materials 12, no. 11 (June 7, 2019): 1857. http://dx.doi.org/10.3390/ma12111857.

Full text
Abstract:
α-MgAgSb is a very promising thermoelectric material with excellent thermoelectric properties between room temperature and 300 °C, a range where few other thermoelectric materials show good performance. Previous reports rely on a two-step ball-milling process and/or time-consuming annealing. Aiming for a faster and scalable fabrication route, herein, we investigated other potential synthesis routes and their impact on the thermoelectric properties of α-MgAgSb. We started from a gas-atomized MgAg precursor and employed ball-milling only in the final mixing step. Direct comparison of high energy ball-milling and planetary ball-milling revealed that high energy ball milling already induced formation of MgAgSb, while planetary ball milling did not. This had a strong impact on the microstructure and secondary phase fraction, resulting in superior performance of the high energy ball milling route with an attractive average thermoelectric figure of merit of z T avg = 0.9. We also show that the formation of undesired secondary phases cannot be avoided by a modification of the sintering temperature after planetary ball milling, and discuss the influence of commonly observed secondary phases on the carrier mobility and on the thermoelectric properties of α-MgAgSb.
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Zihang, Jun Mao, Jiehe Sui, and Zhifeng Ren. "High thermoelectric performance of α-MgAgSb for power generation." Energy & Environmental Science 11, no. 1 (2018): 23–44. http://dx.doi.org/10.1039/c7ee02504a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lei, Jingdan, De Zhang, Weibao Guan, Zhenxiang Cheng, Chao Wang, and Yuanxu Wang. "Engineering electrical transport in α-MgAgSb to realize high performances near room temperature." Physical Chemistry Chemical Physics 20, no. 24 (2018): 16729–35. http://dx.doi.org/10.1039/c8cp02186d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liao, Yuntiao, Jun-Liang Chen, Chengyan Liu, Jisheng Liang, Qi Zhou, Ping Wang, and Lei Miao. "Sintering pressure as a “scalpel” to enhance the thermoelectric performance of MgAgSb." Journal of Materials Chemistry C 10, no. 9 (2022): 3360–67. http://dx.doi.org/10.1039/d1tc05617d.

Full text
Abstract:
P-type nanostructured α-MgAgSb by virtue of its intrinsically low thermal conductivity and environment friendly characteristics has drawn a great deal of attention for low temperature power generation.
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Zihang, Weihong Gao, Xianfu Meng, Xiaobo Li, Jun Mao, Yumei Wang, Jing Shuai, Wei Cai, Zhifeng Ren, and Jiehe Sui. "Mechanical properties of nanostructured thermoelectric materials α-MgAgSb." Scripta Materialia 127 (January 2017): 72–75. http://dx.doi.org/10.1016/j.scriptamat.2016.08.037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Zihang, Huiyuan Geng, Jun Mao, Jing Shuai, Ran He, Chao Wang, Wei Cai, Jiehe Sui, and Zhifeng Ren. "Understanding and manipulating the intrinsic point defect in α-MgAgSb for higher thermoelectric performance." Journal of Materials Chemistry A 4, no. 43 (2016): 16834–40. http://dx.doi.org/10.1039/c6ta06832d.

Full text
Abstract:
Thorough first-principles calculations reveal that an Ag vacancy is the dominant intrinsic point defect in α-MgAgSb. Point-defect engineering can be realized via rationally controlling the hot press temperature due to the recovery effect.
APA, Harvard, Vancouver, ISO, and other styles
7

Gao, Weihong, Xiaoyang Yi, Bo Cui, Zhenyou Wang, Jin Huang, Jiehe Sui, and Zihang Liu. "The critical role of boron doping in the thermoelectric and mechanical properties of nanostructured α-MgAgSb." Journal of Materials Chemistry C 6, no. 36 (2018): 9821–27. http://dx.doi.org/10.1039/c8tc03646b.

Full text
Abstract:
The ineffectiveness of boron doping to enhance thermoelectric performance lied in the introduced perturbation to the valence band. Due to the significant solution strengthening by boron doping, the micro-hardness values of α-MgAgSb have been largely increased.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Gang, Ji-wen Xu, and Guang-hui Rao. "Hole doped α-MgAgSb as potential low temperature thermoelectric materials." Physics Letters A 383, no. 26 (September 2019): 125833. http://dx.doi.org/10.1016/j.physleta.2019.07.021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Xin, Jiwu, Junyou Yang, Sihui Li, Abdul Basit, Bingyang Sun, Suwei Li, Qiang Long, Xin Li, Ying Chen, and Qinghui Jiang. "Thermoelectric Performance of Rapidly Microwave-Synthesized α-MgAgSb with SnTe Nanoinclusions." Chemistry of Materials 31, no. 7 (February 4, 2019): 2421–30. http://dx.doi.org/10.1021/acs.chemmater.8b05014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ying, Pingjun, Xiaohua Liu, Chenguang Fu, Xianqiang Yue, Hanhui Xie, Xinbing Zhao, Wenqing Zhang, and Tiejun Zhu. "High Performance α-MgAgSb Thermoelectric Materials for Low Temperature Power Generation." Chemistry of Materials 27, no. 3 (January 26, 2015): 909–13. http://dx.doi.org/10.1021/cm5041826.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Tan, Xiaojian, Ling Wang, Hezhu Shao, Song Yue, Jingtao Xu, Guoqiang Liu, Haochuan Jiang, and Jun Jiang. "Improving Thermoelectric Performance of α-MgAgSb by Theoretical Band Engineering Design." Advanced Energy Materials 7, no. 18 (May 23, 2017): 1700076. http://dx.doi.org/10.1002/aenm.201700076.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Li, Jingyu, Yuanxu Wang, Yuli Yan, Chao Wang, and Lili Li. "Pressure effect on the electronic structure and thermoelectric properties of α-MgAgSb." Computational Materials Science 155 (December 2018): 450–56. http://dx.doi.org/10.1016/j.commatsci.2018.08.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Zhang, Ting, Baokun Dong, and Xuan Wang. "Optimization of the thermoelectric performance of α-MgAgSb-based materials by Zn-doping." Journal of Materials Science 56, no. 24 (May 19, 2021): 13715–22. http://dx.doi.org/10.1007/s10853-021-06171-y.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Miao, Naihua, Jian Zhou, Baisheng Sa, Bin Xu, and Zhimei Sun. "Pressure-induced semimetal-semiconductor transition and enhancement of thermoelectric performance in α-MgAgSb." Applied Physics Letters 108, no. 21 (May 23, 2016): 213902. http://dx.doi.org/10.1063/1.4952598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Li, Xiyang, Zhigang Zhang, Lunhua He, Maxim Avdeev, Yang Ren, Huaizhou Zhao, and Fangwei Wang. "Grain size and structure distortion characterization of α-MgAgSb thermoelectric material by powder diffraction." Chinese Physics B 29, no. 10 (October 2020): 106101. http://dx.doi.org/10.1088/1674-1056/aba09c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Yang, Jia-Yue, Wenjie Zhang, and Ming Hu. "Decoupling thermal and electrical transport in α-MgAgSb with synergic pressure and doping strategy." Journal of Applied Physics 125, no. 20 (May 28, 2019): 205105. http://dx.doi.org/10.1063/1.5090456.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Liu, Zihang, Yumei Wang, Weihong Gao, Jun Mao, Huiyuan Geng, Jing Shuai, Wei Cai, Jiehe Sui, and Zhifeng Ren. "The influence of doping sites on achieving higher thermoelectric performance for nanostructured α-MgAgSb." Nano Energy 31 (January 2017): 194–200. http://dx.doi.org/10.1016/j.nanoen.2016.11.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Ying, Pingjun, Xin Li, Yancheng Wang, Jiong Yang, Chenguang Fu, Wenqing Zhang, Xinbing Zhao, and Tiejun Zhu. "Hierarchical Chemical Bonds Contributing to the Intrinsically Low Thermal Conductivity in α-MgAgSb Thermoelectric Materials." Advanced Functional Materials 27, no. 1 (October 28, 2016): 1604145. http://dx.doi.org/10.1002/adfm.201604145.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Lei, Jingdan, De Zhang, Weibao Guan, Zheng Ma, Zhenxiang Cheng, Chao Wang, and Yuanxu Wang. "Enhancement of thermoelectric figure of merit by the insertion of multi-walled carbon nanotubes in α-MgAgSb." Applied Physics Letters 113, no. 8 (August 20, 2018): 083901. http://dx.doi.org/10.1063/1.5042265.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Pang, Zhuoyi, Xiwen Zhang, and Chao Wang. "Investigation on native defects of α -MgAgSb and its effects on thermoelectric properties using first principles calculations." Current Applied Physics 17, no. 10 (October 2017): 1279–87. http://dx.doi.org/10.1016/j.cap.2017.06.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Li, Dandan, Huaizhou Zhao, Shanming Li, Beipei Wei, Jing Shuai, Chenglong Shi, Xuekui Xi, et al. "Atomic Disorders Induced by Silver and Magnesium Ion Migrations Favor High Thermoelectric Performance in α-MgAgSb-Based Materials." Advanced Functional Materials 25, no. 41 (September 28, 2015): 6478–88. http://dx.doi.org/10.1002/adfm.201503022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Toh, Keita, Koichiro Suekuni, Katsuaki Hashikuni, Hirotaka Nishiate, Ushin Anazawa, Chul-Ho Lee, and Michitaka Ohtaki. "An effective synthesis route for high-performance α-MgAgSb thermoelectric material." Journal of Materials Science, May 26, 2022. http://dx.doi.org/10.1007/s10853-022-07306-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Feng, Zhenzhen, Jihua Zhang, Yuli Yan, Guangbiao Zhang, Chao Wang, Chengxiao Peng, Fengzhu Ren, Yuanxu Wang, and Zhenxiang Cheng. "Ag-Mg antisite defect induced high thermoelectric performance of α-MgAgSb." Scientific Reports 7, no. 1 (May 31, 2017). http://dx.doi.org/10.1038/s41598-017-02808-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Oueldna, Nouredine, Alain Portavoce, Maxime Bertoglio, Marion Descoins, Abdelkhalek Kammouni, and Khalid Hoummada. "Seebeck coefficient variations of α-MgAgSb in crystalline Mg-Ag-Sb thin films." Journal of Alloys and Compounds, October 2022, 167692. http://dx.doi.org/10.1016/j.jallcom.2022.167692.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Li, Xiyang, Peng-Fei Liu, Enyue Zhao, Zhigang Zhang, Tatiana Guidi, Manh Duc Le, Maxim Avdeev, et al. "Ultralow thermal conductivity from transverse acoustic phonon suppression in distorted crystalline α-MgAgSb." Nature Communications 11, no. 1 (February 18, 2020). http://dx.doi.org/10.1038/s41467-020-14772-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Liu, Zihang, Weihong Gao, Hironori Oshima, Kazuo Nagase, Chul-Ho Lee, and Takao Mori. "Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling." Nature Communications 13, no. 1 (March 2, 2022). http://dx.doi.org/10.1038/s41467-022-28798-4.

Full text
Abstract:
AbstractAlthough the thermoelectric effect was discovered around 200 years ago, the main application in practice is thermoelectric cooling using the traditional Bi2Te3. The related studies of new and efficient room-temperature thermoelectric materials and modules have, however, not come to fruition yet. In this work, the electronic properties of n-type Mg3.2Bi1.5Sb0.5 material are maximized via delicate microstructural design with the aim of eliminating the thermal grain boundary resistance, eventually leading to a high zT above 1 over a broad temperature range from 323 K to 423 K. Importantly, we further demonstrated a great breakthrough in the non-Bi2Te3 thermoelectric module, coupled with the high-performance p-type α-MgAgSb, for room-temperature power generation and thermoelectric cooling. A high conversion efficiency of ~2.8% at the temperature difference of 95 K and a maximum temperature difference of 56.5 K are experimentally achieved. If the interfacial contact resistance is further reduced, our non-Bi2Te3 module may rival the long-standing champion commercial Bi2Te3 system. Overall, this work represents a substantial step towards the real thermoelectric application using non-Bi2Te3 materials and devices.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography