Thematische Bibliographien / Vibrace provozní modální analýza

Inhaltsverzeichnis

  1. Dissertationen

Auswahl der wissenschaftlichen Literatur zum Thema „Vibrace provozní modální analýza“

Autor: Grafiati
Veröffentlicht am 28. Juni 2021
Zuletzt aktualisiert am 8. Februar 2022

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Vibrace provozní modální analýza" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Dissertationen zum Thema "Vibrace provozní modální analýza"

1

Sodomka, Tomáš. „Analýza modálního tlumení strojní součásti pomocí metody OMA“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443767.

Der volle Inhalt der Quelle
Annotation:
In one of the first hours of study at the Institute of Mechanics of Bodies, Mechatronics and Biomechanics, the author of this work received three basic recommendations regarding measurement: 1) Do not measure! 2) If you measure, do not repeat the measurement!! 3) If you repeat the measurement, do not compare the measurements!!! However, this thesis boldly violates all three recommendations. In the introductory theoretical part, it briefly introduces the vibration of multi-degree of freedom damped systems and describes experimental ways of determining the modal damping. It also summarizes the Operational Modal Analysis (OMA) approach, explains the principle of the FDD method, and introduces EFDD (Enhanced Frequency Domain Decomposition) method which allows to determine not only natural frequencies and shapes as FDD does, but also modal damping of the shapes. A script in Matlab environment for processing vibrations using EFDD method is one of the thesis outputs. The script is first tested by computational model, where a model system with known damping is tested and damping is determined by the script. Subsequently, the work moves to the actual measurement of the real system - a bonded bar which is analysed by Experimental Modal Analysis and OMA, while the second variant uses commercial EFDD method (Brüel a Kjr company) and programmed script. In the conclusion of the thesis the damping results are compared to each other. The diploma thesis continues in Ing. M. Pop’s thesis – Modal Analysis Experimental Method Verification. From this work a part of measured data is taken. Specific cases of data use are always listed in the appropriate section of the text.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Kratochvílová, Silvie. „Analýza typů buzení pro provádění provozní modální analýzy obráběcích strojů“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-367536.

Der volle Inhalt der Quelle
Annotation:
The aim of this work is to determine the influence of noise on determination of own frequen-cies for machine tool by operational modal analysis. For the assigned machine tool operation-al analysis is performed using Data-Driven and Covariance-Driven method for multiple exci-tation variants. Based on the results are created stabilization diagrams used to determine ma-chine tool own frequencies. The results for each excitation variant are compared to each oth-er and the effect of noise influence on the results is determined.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Fiala, Zdeněk. „Vibrace při obrábění kovů“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229045.

Der volle Inhalt der Quelle
Annotation:
The diploma work deals with a mathematical description of vibration and its generation when machining. Moreover, some techniques of modal parameters measurement in the theoretical part are included. The practical part is designed and based on the measured natural frequencies of the machine with specific tool and materials. In conclusion, a lobe diagram stability for semiautomatic lathe SPN 12 CNC and selected machining operation is specified by means of apparatus.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Čepica, Vojtěch. „Posouzení vlivu tuhosti ložiskových štítů a kvality vyvážení na vibrace synchronního generátoru“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254405.

Der volle Inhalt der Quelle
Annotation:
The main focus of my master thesis is the assessment of effects of the bearing shields stiffness and balance quality on synchronous generator vibration. The incentive of writing the thesis is the problematic situation, which is characterized by synchronous generator vibration. The aim of my thesis is to variate shields stiffness and to find out the dependence of vibration on stiffness during nominal speed. I have used the program ANSYS based on finite element method to solve this problem.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Pop, Miroslav. „Ověřování věrohodnosti měřicí metody z oblasti modální analýzy“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401587.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with the issue of operational modal analysis, which is one of the newer areas of structural dynamics that makes it possible to estimate modal properties of structures directly during their operation. The aim of this work is to create theoretical basis of operational modal analysis, more specifically of Frequeny Domain Decomposition method. Furthermore, apply this method to a selected structure and verify the achieved results using computational modelling and experimental modal analysis. The technique of dividing the experiment to separate measurements using reference sensor was used. Evaluation of the operational modal analysis was performed using self-created function for the MATLAB software and using the commercial PULSE Operational Modal Analysis software. Obtained results were verified by computational modelling and experimental modal analysis.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Blecha, Martin. „Laboratorní demonstrátor pro vibrační diagnostiku“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400643.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with a vibration diagnostics of objects, structures and machines. The theoretical part is divided into three chapters according to type of the measurement. The first part called Modal Analysis discusses the basis of vibration, methods of measurement, relevant technical equipment and principle of experimental modal analysis. The second and third chapters of the thesis are focused on the diagnosis of defects. Each chapter mentioned above describes diagnosed defects, used methods and procedure for the diagnosis. Another part of the thesis summarizes practical issues and results gained in the laboratory experiments. It begins with discovering parameters of the measured object using technical diagnostics – experimental modal analysis. In the next step the hardware concept design was created, including custom measuring application programmed in LabVIEW. One part of the design is the laboratory model which includes a structure for free mounting and a possibility of excitation by an electrodynamic exciter. The application is also modified to enable measurements with shaker excitation. Finally, applications cooperating with professional software ModalVIEW and BK Connect were developed in order to simplify the operation and increase the comfort.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Nádvorník, Vít. „Dynamické vlastnosti obrobku při soustružení“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241875.

Der volle Inhalt der Quelle
Annotation:
The contens of master thesis is theoretical analysis of vibrations during turning and possibillity to eliminate them, measure dynamic compliance and modal paramteters. The goal of experimental part is to determine the effect of material and type of clamping for three shafts at natural frequency, mode shape and dynamic compliance. Using these results we can optimized cutting parameters and to better overcome vibration during machining.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Bouchner, Michal. „Určení NVH parametrů rovinné desky“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378142.

Der volle Inhalt der Quelle
Annotation:
The aim of this thesis is examination and verification of numeric model for solving acoustics and vibration problems. Specifically, we are speaking about cast iron plate machined from gearbox. Main objectives of this work is set of experimental and numerical analysis at this simplified part with follow-up numerical model, where same analyses examining not only structure, but especially acoustic space around were performed. Due to this we were able to compare data between experimental and numerical analyses and to be able to prove or disprove functionality and limitation of numerical model.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Řehová, Jana. „Analýza dynamického chování štíhlé mostní konstrukce a návrh zařízení na omezení vibrací“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409744.

Der volle Inhalt der Quelle
Annotation:
This master thesis deals with the dynamic analysis of a footbridge. Computational model of the footbridge was created using ANSYS software. The model was subjected to dynamic wind load in longitudal and lateral direction. Furthermore pedestrian load in lateral direction was analyzed. Afterwards, due to unsatisfactory response to the pedestrian laod, a tuned mass damper was introduced to reduce the vibration. This lead to decrease in the vibration to a satisfactory levels, as is shown in the analyses of the model.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Kůst, Martin. „Konstrukční návrh moderního těla reproduktoru s využitím nových technologií“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-432589.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with the analysis and design optimization of a speaker cabinet (enclosure) produced by the additive technology of 3D sand printing. The introductory part is devoted to the theory, both in the field of noise, vibration and the method of their calculations, as well as the theory of speakers and their systems. Numerical and experimental modal analysis is performed, which were compared to determine the mechanical properties of the new material, including material damping. This is followed by experimental and numerical harmonic analysis, with output in the form of a numerical model describing the behaviour of the structure during its excitation. The data are compared with a modal analysis of the internal acoustic space and the critical shapes and their frequencies are determined. At the end of the work, construction modifications are proposed to increase the rigidity of enclosures, the influence of which is evaluated on the created numerical models.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie