Zeitschriftenartikel: „Transmission path“

1

Li, Y., und V. Venkatasubramanian. „Coordination of Transmission Path Transfers“. IEEE Transactions on Power Systems 19, Nr. 3 (August 2004): 1607–15. http://dx.doi.org/10.1109/tpwrs.2004.826772.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

M., Dr Subalakshmi. „MLPR-ASTP: Multipath Linear Propagation Routing based Improving Transmission in VANET Using Adaptive Sequence Transmission on Delay Path“. Journal of Advanced Research in Dynamical and Control Systems 12, SP4 (31.03.2020): 240–49. http://dx.doi.org/10.5373/jardcs/v12sp4/20201486.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Garcia, Jose A. „Bit-saving path for progressive transmission“. Optical Engineering 46, Nr. 11 (01.11.2007): 117001. http://dx.doi.org/10.1117/1.2802151.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Lim, Jae S., und Lon E. Sunshine. „HDTV transmission formats and migration path“. International Journal of Imaging Systems and Technology 5, Nr. 4 (1994): 286–91. http://dx.doi.org/10.1002/ima.1850050408.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Tragoudas, S. „The most reliable data-path transmission“. IEEE Transactions on Reliability 50, Nr. 3 (2001): 281–85. http://dx.doi.org/10.1109/24.974124.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Kavicky, J. A., und S. M. Shahidehpour. „Parallel path aspects of transmission modeling“. IEEE Transactions on Power Systems 11, Nr. 3 (1996): 1180–90. http://dx.doi.org/10.1109/59.535589.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Steinfelder, Christian, Sven Martin, Alexander Brosius und Thomas Tröster. „Load Path Transmission in Joining Elements“. Key Engineering Materials 883 (April 2021): 73–80. http://dx.doi.org/10.4028/www.scientific.net/kem.883.73.

Der volle Inhalt der Quelle

Annotation:

The mechanical properties of joined structures are determined considerably by the chosen joining technology. With the aim of providing a method that enables a faster and more profound decision-making in the spatial distribution of joining points during product development, a new method for the load path analysis of joining points is presented. For an exemplary car body, the load type in the joining elements, i.e. pure tensile, shear and combined tensile-shear loads, is determined using finite element analysis (FEA). Based on the evaluated loads, the resulting load paths in selected joining points are analyzed using a 2D FE-model of a clinching point. State of the art methods for load path analysis are dependent on the selected coordinate system or the existing stress state. Thus, a general statement about the load transmission path is not possible at this time. Here, a novel method for the analysis of load paths is used, which is independent of the alignment of the analyzed geometry. The basic assumption of the new load path analysis method was confirmed by using a simple specimen with a square hole in different orientations. The results presented here show a possibility to display the load transmission path invariantly. In further steps, the method will be extended for 3D analysis and the investigation of more complex assemblies. The primary goal of this methodical approach is an even load distribution over the joining elements and the component. This will provide a basis for future design approaches aimed at reducing the number of joining elements in joined structures.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Zhao, Wei, und Yi-Min Zhang. „Reliability Analysis of Random Vibration Transmission Path Systems“. Mathematical Problems in Engineering 2017 (2017): 1–6. http://dx.doi.org/10.1155/2017/6814547.

Der volle Inhalt der Quelle

Annotation:

The vibration transmission path systems are generally composed of the vibration source, the vibration transfer path, and the vibration receiving structure. The transfer path is the medium of the vibration transmission. Moreover, the randomness of transfer path influences the transfer reliability greatly. In this paper, based on the matrix calculus, the generalized second moment technique, and the stochastic finite element theory, the effective approach for the transfer reliability of vibration transfer path systems was provided. The transfer reliability of vibration transfer path system with uncertain path parameters including path mass and path stiffness was analyzed theoretically and computed numerically, and the correlated mathematical expressions were derived. Thus, it provides the theoretical foundation for the dynamic design of vibration systems in practical project, so that most random path parameters can be considered to solve the random problems for vibration transfer path systems, which can avoid the system resonance failure.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Goldstern, Ernest. „System for the transmission of speech through a disturbed transmission path“. Journal of the Acoustical Society of America 86, Nr. 5 (November 1989): 2051. http://dx.doi.org/10.1121/1.398534.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Teichler, Stephen L., und Ilia Levitine. „HVDC Transmission: A Path to the Future?“ Electricity Journal 23, Nr. 4 (Mai 2010): 27–41. http://dx.doi.org/10.1016/j.tej.2010.04.002.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Ciniglio, O. A., und A. K. Deb. „Optimizing Transmission Path Utilization in Idaho Power“. IEEE Transactions on Power Delivery 19, Nr. 2 (April 2004): 830–34. http://dx.doi.org/10.1109/tpwrd.2003.823186.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

dos Santos Rosa, Sávio R. A., André C. Drummond und Nelson L. S. da Fonseca. „Path protection WDM networks with impaired-transmission“. Photonic Network Communications 19, Nr. 2 (03.12.2009): 212–22. http://dx.doi.org/10.1007/s11107-009-0226-6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Fujihashi, Takuya, Shunsuke Saruwatari und Takashi Watanabe. „Multiview Video Transmission Over Underwater Acoustic Path“. IEEE Transactions on Multimedia 20, Nr. 8 (August 2018): 2166–81. http://dx.doi.org/10.1109/tmm.2018.2791800.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Buckmaster, H. A., und C. H. Hansen. „Volcanic eruption induced WWVB transmission path interruption“. Journal of Atmospheric and Terrestrial Physics 47, Nr. 7 (Juli 1985): 685–92. http://dx.doi.org/10.1016/0021-9169(85)90104-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Scimemi, Annalisa, Stephanie Schorge, Dimitri M. Kullmann und Matthew C. Walker. „Epileptogenesis Is Associated With Enhanced Glutamatergic Transmission in the Perforant Path“. Journal of Neurophysiology 95, Nr. 2 (Februar 2006): 1213–20. http://dx.doi.org/10.1152/jn.00680.2005.

Der volle Inhalt der Quelle

Annotation:

The perforant path provides the main excitatory input into the hippocampus and has been proposed to play a critical role in the generation of temporal lobe seizures. It has been hypothesized that changes in glutamatergic transmission in this pathway promote the epileptogenic process and seizure generation. We therefore asked whether epileptogenesis is associated with enhanced glutamatergic transmission from the perforant path to dentate granule cells. We used a rat model of temporal lobe epilepsy in which spontaneous seizures occur after an episode of pilocarpine-induced status epilepticus. Whole cell patch-clamp recordings were obtained from dentate granule cells in hippocampal slices from control and epileptic animals 3 wk after pilocarpine-induced status epilepticus. The paired pulse ratio of perforant path-evoked AMPA receptor-mediated excitatory postsynaptic currents (EPSCs) was reduced in tissue obtained from epileptic rats. This is consistent with an increase in release probability. N-methyl-d-aspartate (NMDA) receptor-mediated EPSCs were also prolonged. This prolongation could not be accounted for by decreased activity of glutamate transporters or by a change in NMDA receptor subunit composition in dentate granule cells, implying a change in NMDA receptor kinetics. This change in NMDA receptor kinetics was associated with the emergence of significant synaptic cross-talk, detected as a use-dependent block of receptors activated by medial perforant path synapses after lateral perforant path stimulation in MK-801. Enhanced glutamatergic transmission and the emergence of cross-talk among perforant path-dentate granule cell synapses may contribute to lowering seizure threshold.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Mohana Geetha, D., S. K. Muthusundar, M. Subramaniam und Kathirvel Ayyaswamy. „Temporary Redundant Transmission Mechanism for SCTP Multihomed Hosts“. Scientific World Journal 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/158697.

Der volle Inhalt der Quelle

Annotation:

In SCTP’s Concurrent Multipath Transfer, if data is sent to the destined IP(s) without knowledge of the paths condition, packets may be lost or delayed. This is because of the bursty nature of IP traffic and physical damage to the network. To offset these problems, network path status is examined using our new mechanism Multipath State Aware Concurrent Multipath Transfer using redundant transmission (MSACMT-RTv2). Here the status of multiple paths is analyzed, initially and periodically thereafter transmitted. After examination, paths priority is assigned before transmission. One path is temporarily employed as redundant path for the failure-expected path (FEP); this redundant path is used for transmitting redundant data. At the end of predefined period, reliability of the FEP is confirmed. If FEP is ensured to be reliable, temporary path is transformed into normal CMT path. MSACMT-RTv2 algorithm is simulated using the Delaware University ns-2 SCTP/CMT module (ns-2; V2.29). We present and discuss MSACMT-RTv2 performance in asymmetric path delay and with finite receiver buffer (rbuf) size. We extended our experiment to test robustness of this algorithm and inferred exhaustive result. It is inferred that our algorithm outperforms better in terms of increasing the throughput and reducing the latency than existing system.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Kavitha, J., und S. Palaniammal. „Efficient Path Selection and Data Transmission Using Queue in Open Shortest Path First“. International Journal of Computer Science and Application 3, Nr. 4 (2014): 139. http://dx.doi.org/10.14355/ijcsa.2014.0304.01.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Zhao, Wei, und Yi-Min Zhang. „Reliability analysis of random vibration transmission path systems“. Mechanical Systems and Signal Processing 113 (Dezember 2018): 77–89. http://dx.doi.org/10.1016/j.ymssp.2017.06.037.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Kavyashree, K., C. N. Sowmyarani und P. Dayananda. „Transmission Control Protocol Off Path Exploits in Web“. Journal of Computational and Theoretical Nanoscience 17, Nr. 9 (01.07.2020): 3995–98. http://dx.doi.org/10.1166/jctn.2020.9006.

Der volle Inhalt der Quelle

Annotation:

The network community in the current scenario has faced lot of potential threats like restricted access to unauthorized network; break in through other organizations, making the system unavailable and so on. An off-path attacker can perform various attacks like Browser page read, Web phishing, website Spoofing and defacement to know the 4 tuples in Transmission Control Protocol. The attacker can also carry out Cross Site Scripting to know the sensitive information on websites. Cross Site Request Forgery which performs defective exploit on web. This helps in detecting the four tuples Sequence number, Acknowledgement number, Global IPID Counter and ports.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

McFadden, P. D., und J. D. Smith. „Effect of Transmission Path on Measured Gear Vibration“. Journal of Vibration and Acoustics 108, Nr. 3 (01.07.1986): 377–78. http://dx.doi.org/10.1115/1.3269353.

Der volle Inhalt der Quelle

Annotation:

The transmission of gear tooth meshing vibration from the tooth contact region to the shaft, through rolling element bearings and then through the gearbox casing can have an important influence on the measured vibration sepctrum. In critical applications the measurement of the torsional vibration of the gear may be preferable.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Thomas, Chris M., und Lawrence E. Larson. „Broadband Synthetic Transmission-Line N-Path Filter Design“. IEEE Transactions on Microwave Theory and Techniques 63, Nr. 10 (Oktober 2015): 3525–36. http://dx.doi.org/10.1109/tmtt.2015.2473161.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Gopalappa, Chaitra, Paul G. Farnham, Yao-Hsuan Chen und Stephanie L. Sansom. „Progression and Transmission of HIV/AIDS (PATH 2.0)“. Medical Decision Making 37, Nr. 2 (26.09.2016): 224–33. http://dx.doi.org/10.1177/0272989x16668509.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Runcos, Rudolfo, Igor Gavriloff, Carlos Marcelo Pedroso, Evelio Martin Garcia Fernandez und Eduardo Parente Ribeiro. „Delay-Centric Handover Issues in Voice Transmissions with Multihomed SCTP“. Journal of Circuits, Systems and Computers 24, Nr. 07 (17.06.2015): 1550096. http://dx.doi.org/10.1142/s0218126615500966.

Der volle Inhalt der Quelle

Annotation:

The Stream Control Transmission Protocol (SCTP) establishes a transport layer framework for multihomed communication where the standard failover mechanism improves the transmission resilience. A delay-centric handover mechanism for SCTP have been proposed to improve the end-to-end delay of real-time multimedia transmissions. In this paper, we explore the coexistence of delay-centric handover and standard SCTP failover to identify whether they work together to select a communication path that preserves voice transmission quality. The study was performed using computer simulations, which allowed us to evaluate users' perceived quality and network stability for several conditions of traffic load and packet loss ratio. Although voice quality is generally improved, conflicting decision about interface selection resulted in performance degradation under certain conditions. The global stability of the delay-centric operation when multiple independent voice transmissions compete for the available bandwidth was also evaluated. Simulations showed that under high link utilization, instabilities due to frequent path switching may lead to lower voice quality.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Kharchenko, Volodymyr, Yuri Barabanov und Andrii Grekhov. „MODELING OF ADS-B DATA TRANSMISSION VIA SATELLITE“. Aviation 17, Nr. 3 (07.10.2013): 119–27. http://dx.doi.org/10.3846/16487788.2013.840057.

Der volle Inhalt der Quelle

Annotation:

For modelling transmission of ADS-B messages via low-orbit satellite constellation Iridium, the original model of a communication channel “Aircraft-to-Satellite-to-Ground Station” was built using MATLAB Simulink. The model comprises “Aircraft Uplink Transmitter” (Bernoulli Random Binary Generator, Convolutional Encoder, BPSK Baseband Modulator, High Power Amplifier with a memoryless nonlinearity, Transmitter Dish Antenna Gain), “Uplink Path” (Free Space Path Loss, Phase/Frequency Offset), “Satellite Transponder” (Receiver Dish Antenna Gain, Satellite Receiver System Temperature, Complex Baseband Amplifier, Phase Noise, Transmitter Dish Antenna Gain), “Downlink Path” (Free Space Path Loss, Phase/Frequency Offset), “Ground Station Downlink Receiver” (Receiver Dish Antenna Gain, Ground Receiver System Temperature, Viterbi Decoder), “Error Rate Calculation” block and “Display”. The modelling was realized without and with convolutional coding (r = 3/4, K = 7) at different noise temperatures and free space losses. Dependencies of a Bit Error Rate on free space path losses, antenna's diameter, phase/frequency off-sets, satellite transponder linear gain, aircraft and satellite transponder high power amplifier back-off level, and phase noise were received and analysed.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Li, Xiaoling, und Xinwei Zhou. „Reliability Measurement in A Multi-path Transmission Network using SMP-BP Algorithm“. International Journal of Online and Biomedical Engineering (iJOE) 15, Nr. 11 (16.07.2019): 16. http://dx.doi.org/10.3991/ijoe.v15i11.10627.

Der volle Inhalt der Quelle

Annotation:

Data security is very important in the multi-path transmission networks (MTN). Efficient data security measurement in MTN is crucial so as to ensure the reliability of data transmission. To this end, this paper presents an improved algorithm using single-single minimal path based back-up path (SSMP-BP), which is designed to ensure the data transmission when the second path is out of work. From the simulation study, the proposed algorithm has the better network reliability compared with existing double minimal path based backup path (DMP-BP) approach. It could be found that, the proposed algorithm uses less back-up paths compared with DMP-BP so that less network resources like nodes are achieved.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Aragonès, Àngels, und Oriol Guasch. „Conditions for transmission path analysis in energy distribution models“. Mechanical Systems and Signal Processing 68-69 (Februar 2016): 245–51. http://dx.doi.org/10.1016/j.ymssp.2015.07.017.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Rahlves, Maik, Axel Gunther, Maher Rezem und Bernhard Roth. „Polymer-Based Transmission Path for Communication and Sensing Applications“. Journal of Lightwave Technology 37, Nr. 3 (01.02.2019): 729–35. http://dx.doi.org/10.1109/jlt.2018.2878291.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

IBI, S. „Space-Path Division Multiplexing Technique for Eigenmode Transmission System“. IEICE Transactions on Communications E89-B, Nr. 6 (01.06.2006): 1960–63. http://dx.doi.org/10.1093/ietcom/e89-b.6.1960.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

King, Mike. „Spiritual transmission: paradoxes and dilemmas on the spiritual path“. Journal for the Study of Spirituality 9, Nr. 2 (03.07.2019): 180–81. http://dx.doi.org/10.1080/20440243.2019.1658273.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Kam, Clement, Sastry Kompella, Gam D. Nguyen und Anthony Ephremides. „Effect of Message Transmission Path Diversity on Status Age“. IEEE Transactions on Information Theory 62, Nr. 3 (März 2016): 1360–74. http://dx.doi.org/10.1109/tit.2015.2511791.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Garcia, J. A. „Dynamics of low-cost transmission on the optimal path“. Optical Engineering 46, Nr. 3 (01.03.2007): 030503. http://dx.doi.org/10.1117/1.2717132.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Rubin, L. M. „Application of path integrals in modeling transmission line loss“. IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B 19, Nr. 4 (1996): 775–88. http://dx.doi.org/10.1109/96.544370.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Baumgartl, J., T. Čižmár, M. Mazilu, V. C. Chan, A. E. Carruthers, B. A. Capron, W. McNeely, E. M. Wright und K. Dholakia. „Optical path clearing and enhanced transmission through colloidal suspensions“. Optics Express 18, Nr. 16 (28.07.2010): 17130. http://dx.doi.org/10.1364/oe.18.017130.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Liu, Wuneng, Lilong Liu, Gengli He und Peng Li. „UAV Inspection Path Planning Based on Transmission Line Technology“. Journal of Physics: Conference Series 1648 (Oktober 2020): 042083. http://dx.doi.org/10.1088/1742-6596/1648/4/042083.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Ke, Chih-Heng, Yeong-Sheng Chen und Yun-Shuai Yu. „Improving video transmission in software defined wired and wireless networks using multi-path transmission“. Journal of Communications and Networks 19, Nr. 6 (Dezember 2017): 587–95. http://dx.doi.org/10.1109/jcn.2017.000099.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Huang, Chung-Ming, und Ching-Hsien Tsai. „The handover control mechanism for multi-path transmission using Stream Control Transmission Protocol (SCTP)“. Computer Communications 30, Nr. 17 (November 2007): 3239–56. http://dx.doi.org/10.1016/j.comcom.2007.06.015.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Liu, Jun Li, Hua Wang und Yan Yan Yan. „Research on the Characteristics of Data Transmission of Wireless Network“. Applied Mechanics and Materials 42 (November 2010): 331–34. http://dx.doi.org/10.4028/www.scientific.net/amm.42.331.

Der volle Inhalt der Quelle

Annotation:

The paper discusses the application of the wireless data transmission in the industrial control system and analyses the characteristics of the data transmission. It gives the different characteristics of data transmission in the four experiments with the Zigbee Protocol. By comparing the result of the wireless network-path loss model and experiments, it shows that the path loss, multiple-point jamming, communication barrier primarily affect the stability of data transmission.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Kozicki, Bartłomiej, Hidehiko Takara, Yukio Tsukishima, Toshihide Yoshimatsu, Takayuki Kobayashi, Kazushige Yonenaga und Masahiko Jinno. „Optical Path Aggregation for 1-Tb/s Transmission in Spectrum-Sliced Elastic Optical Path Network“. IEEE Photonics Technology Letters 22, Nr. 17 (September 2010): 1315–17. http://dx.doi.org/10.1109/lpt.2010.2055046.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Hamazumi, Y., und M. Koga. „Transmission capacity of optical path overhead transfer scheme using pilot tone for optical path network“. Journal of Lightwave Technology 15, Nr. 12 (1997): 2197–205. http://dx.doi.org/10.1109/50.643540.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Liu, Rui Qi, Yu Dong, Cheng Pei Tang und Jiang Qun Ni. „Energy Efficient Path Analysis and Research in Ad Hoc Networks“. Applied Mechanics and Materials 443 (Oktober 2013): 521–25. http://dx.doi.org/10.4028/www.scientific.net/amm.443.521.

Der volle Inhalt der Quelle

Annotation:

Energy Conservation has been the focus in the ad hoc wireless network study. As the capacity of battery is limited, node will lose its function once its energy is exhausted. This thesis is aiming to calculate among the multiple transmission paths and find out a path which consumes the least energy. Previous studies are focused on finding the minimum hop path in transmission. In this study we propose to use the square of the distance between nodes as a proxy to the power consumption as the transmission power is proportional to the square of the distance between the nodes. We simulate the node transmission by limiting node out-degree in broadcasting and calculate the minimum sum of the square of distance between nodes in the path to find a path which has the least energy consumption.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Durukan, Ya, A. N. Peregudov und M. M. Shevelko. „ANALYSIS OF ACOUSTIC PATH TRANSMISSION FACTOR FOR ANGULAR VELOCITY SENSOR“. Journal of the Russian Universities. Radioelectronics, Nr. 1 (28.02.2019): 56–74. http://dx.doi.org/10.32603/1993-8985-2019-22-1-56-65.

Der volle Inhalt der Quelle

Annotation:

The change in characteristics of ultrasonic waves’ transmittion in solid rotating media is the basis for the operation of acoustic angular velocity sensor. The transmission coefficient of the sensing element (SE) of the acoustic path deter-mines the level of angular velocity sensor informative signal based on detecting changes in characteristics of bulk acoustic waves in solid media. In this regard, the efforts aimed at obtaining maximum transmission coefficient are relevant and represent an important stage in the design of such devices. The sensitive element of the acoustic path consists of radiating and receiving plate piezoelectric transducers, propagation medium (acoustic duct), contact layers and electrical load. The coefficient is identical to the path of ultrasonic delay lines on bulk acoustic waves. Although, many sources present the theoretical analysis of the path of this type, they carry out the analysis in so-called one-dimensional approximation, i.e. they perform the analysis without taking into account the limited transverse dimensions, whereas the path of the sensing element should have limited lateral dimensions, which can affect the value of transmission coefficient. The above-mentioned sources do not present the results of experiments. Thus, it is necessary to conduct a complex of simulation and experiments to analyze the acoustic path transmission coefficient of the angular velocity sensor. Authors of the paper developed a pathmodeling program in Mathcad software to perform simulation. For implementation of the experiment, authors created the installation, as well as a number of proto-types with transducers made of piezoelectric quartz and piezoelectric ceramics. The results demonstrate that fundamental statements developed for one-dimensional approximation one can use to determine the transmission coefficient of the acoustic path with limited dimensions. Besides, the use of the matched electrical load gives the opportunity to increase the transmission coefficient. For example, in case of Y-cut piezoelectric quartz converter prototype the increase reached 20 dB.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Teykhrib, Anton Pavlovich. „Data transmission in Hybrid Distributed Environment“. International Journal of Electrical and Computer Engineering (IJECE) 6, Nr. 6 (01.12.2016): 2989. http://dx.doi.org/10.11591/ijece.v6i6.12129.

Der volle Inhalt der Quelle

Annotation:

<p>This article discusses a hybrid distributed environment including two levels of nodes: the first level which has high quality channels between the nodes, and the second one in which the nodes are directly involved in communication and the communication is performed through the first-level nodes. For the indicated distribution scheme, the questions of selection of the best path between the first-level nodes are solved based on such communication channel characteristics as delay in packet transmission, jitter in transmission, packet loss in transmission, and choosing a method for data transmission through the selected best path: protocols of transport and network layers have been compared, and the use of network layer has been preferred.</p>

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Teykhrib, Anton Pavlovich. „Data transmission in Hybrid Distributed Environment“. International Journal of Electrical and Computer Engineering (IJECE) 6, Nr. 6 (01.12.2016): 2989. http://dx.doi.org/10.11591/ijece.v6i6.pp2989-2993.

Der volle Inhalt der Quelle

Annotation:

<p>This article discusses a hybrid distributed environment including two levels of nodes: the first level which has high quality channels between the nodes, and the second one in which the nodes are directly involved in communication and the communication is performed through the first-level nodes. For the indicated distribution scheme, the questions of selection of the best path between the first-level nodes are solved based on such communication channel characteristics as delay in packet transmission, jitter in transmission, packet loss in transmission, and choosing a method for data transmission through the selected best path: protocols of transport and network layers have been compared, and the use of network layer has been preferred.</p>

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

de Wit, Emmie, und Vincent J. Munster. „Animal models of disease shed light on Nipah virus pathogenesis and transmission“. Journal of Pathology 235, Nr. 2 (11.12.2014): 196–205. http://dx.doi.org/10.1002/path.4444.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Soilleux, Elizabeth J., Lesley S. Morris, Benhur Lee, Stefan Pöhlmann, John Trowsdale, Robert W. Doms und Nicholas Coleman. „Placental expression of DC-SIGN may mediate intrauterine vertical transmission of HIV“. Journal of Pathology 195, Nr. 5 (25.10.2001): 586–92. http://dx.doi.org/10.1002/path.1026.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Hamza, Ekhlas K., und Heba H. Alhayani. „Energy Consumption Analyzing in Single hop Transmission and Multi-hop Transmission for using Wireless Sensor Networks“. Al-Khwarizmi Engineering Journal 14, Nr. 1 (08.04.2018): 156–63. http://dx.doi.org/10.22153/https://doi.org/10.22153/kej.2018.10.009.

Der volle Inhalt der Quelle

Annotation:

Wireless sensor networks (WSNs) are emerging in various application like military, area monitoring, health monitoring, industry monitoring and many more. The challenges of the successful WSN application are the energy consumption problem. since the small, portable batteries integrated into the sensor chips cannot be re-charged easily from an economical point of view. This work focusses on prolonging the network lifetime of WSNs by reducing and balancing energy consumption during routing process from hop number point of view. In this paper, performance simulation was done between two types of protocols LEACH that uses single hop path and MODLEACH that uses multi hop path by using Intel Care i3 CPU (2.13GHz) laptop with MATLAB (R2014a). The simulation results showed how the multi-hop protocol was more energy efficient than single hop protocol.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Fan, Ya Qin, Shu Ting Liu und Chi Li. „Performance Simulation of the SCTP under the Multi Path Environment“. Applied Mechanics and Materials 738-739 (März 2015): 1174–77. http://dx.doi.org/10.4028/www.scientific.net/amm.738-739.1174.

Der volle Inhalt der Quelle

Annotation:

This paper studies the basic features and functions of STCP. The traditional TCP protocol and the basic standard SCTP protocols are simulated respectively. We analysis that when the host has multiple network addresses and there are multiple paths between ends, how do the STCP protocol and TCP protocol perform. For practical implementation, using CWND size parameters show performance of multi path transmission in practice, and compare with the ideal case. The results of the simulation and analysis of multi path transmission under the SCTP agreement have practical significance in the future network with multi path transmission.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Ju, Yong Feng, und Hui Chen. „Research on MANET Routing Algorithm Based on Ant Colony Algorithm“. Applied Mechanics and Materials 135-136 (Oktober 2011): 781–87. http://dx.doi.org/10.4028/www.scientific.net/amm.135-136.781.

Der volle Inhalt der Quelle

Annotation:

This paper proposed a new Ad Hoc dynamic routing algorithm, which based on ant-colony algorithm in order to reasonably extend the dynamic allocation of network traffic and network lifetime. The Algorithm choose path according transmission latency, path of the energy rate, congestion rate, dynamic rate. The Algorithm update the routing table by dynamic collection of path information after path established. The analyse shows that algorithm increases the network throughput, reduces the average end-to-end packet transmission latency, and extends the network lifetime, achieves an improving performance.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Qiao, Jin Wei, Xiao Hu Yin und Na Liu. „Modular Design of 3-D Ribbon Conveyer“. Applied Mechanics and Materials 707 (Dezember 2014): 360–63. http://dx.doi.org/10.4028/www.scientific.net/amm.707.360.

Der volle Inhalt der Quelle

Annotation:

In order to satisfy different field requirement of product transmission during the process of its making and storing, this paper offered a brand new modular 3-D ribbon conveyer. Compared with traditional ribbon conveyer, it has some excellent properties like modular design, adjustable transmission path, and independent driving. As a result, it can change its transmission path in 3-D space and convey product to the prescribed location.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Sharma, Ashutosh, Rajiv Kumar, Manar Wasif Abu Talib, Saurabh Srivastava und Razi Iqbal. „Network modelling and computation of quickest path for service-level agreements using bi-objective optimization“. International Journal of Distributed Sensor Networks 15, Nr. 10 (Oktober 2019): 155014771988111. http://dx.doi.org/10.1177/1550147719881116.

Der volle Inhalt der Quelle

Annotation:

This article addresses the problem related to the reliability of path after transmitting the given amount of data with the service-level agreement cooperation in the computer communication network. The links have associated with service performance factor parameter during the data transmission, and each node is associated with the requested service performance factor. In this article, first we have considered the single objective to minimize the transmission time of the quickest path problem. An algorithm for quickest path problem has been proposed for results, and furthermore, its time complexity has been shown. The problem has been extended with bi-objective optimization of the quickest path problem, which minimizes the transmission time and hybrid logarithmic reliability. An algorithm is proposed for getting the number of efficient solutions for the quickest path problem using label-correcting algorithm. The algorithms are implemented and tested on different standard benchmark network problems provided with the set of Pareto front of the results.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Zeitschriftenartikel zum Thema „Transmission path“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an