Zeitschriftenartikel: „Technology of additive manufacturing“

1

FUJIKAWA, Takao. „Additive Manufacturing Technology“. Journal of the Japan Society of Powder and Powder Metallurgy 61, Nr. 5 (2014): 216. http://dx.doi.org/10.2497/jjspm.61.216.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Bhattacharyya, Som Sekhar, und Sanket Atre. „Additive Manufacturing Technology“. International Journal of Asian Business and Information Management 11, Nr. 1 (Januar 2020): 1–20. http://dx.doi.org/10.4018/ijabim.2020010101.

Der volle Inhalt der Quelle

Annotation:

The authors studied strategic aspects pertaining to adoption drivers, challenges and strategic value of Additive Manufacturing Technology (AMT) in the Indian manufacturing landscape. An exploratory qualitative study with semi-structured in-depth personal interviews of experts was completed and the data was content analysed. Indian firms have identified the need for AMT in R&D and prototype generation. AMT implementation helps Indian firms in mass customization and eases the manufacturing of complex geometric shapes. This study insights would help AMT managers in emerging economies to enable adoption drivers, overcome challenges and add strategic value with AMT. This is one of the very first studies on AMT with theoretical perspectives on the Miltenberg framework, adoption drivers, challenges and strategic value in the Indian manufacturing landscape.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Huang, Jigang, Qin Qin, Jie Wang und Hui Fang. „Two Dimensional Laser Galvanometer Scanning Technology for Additive Manufacturing“. International Journal of Materials, Mechanics and Manufacturing 6, Nr. 5 (Oktober 2018): 332–36. http://dx.doi.org/10.18178/ijmmm.2018.6.5.402.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Hwang, Myun Joong, und Jungho Cho. „Laser Additive Manufacturing Technology Review“. Journal of Welding and Joining 32, Nr. 4 (31.08.2014): 15–19. http://dx.doi.org/10.5781/jwj.2014.32.4.15.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Holländer, Andreas, und Patrick Cosemans. „Surface technology for additive manufacturing“. Plasma Processes and Polymers 17, Nr. 1 (13.11.2019): 1900155. http://dx.doi.org/10.1002/ppap.201900155.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

KYOGOKU, Hideki. „Laser-based Additive Manufacturing Technology“. Journal of The Surface Finishing Society of Japan 71, Nr. 11 (01.11.2020): 677–83. http://dx.doi.org/10.4139/sfj.71.677.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Costa, José, Elsa Sequeiros, Maria Teresa Vieira und Manuel Vieira. „Additive Manufacturing“. U.Porto Journal of Engineering 7, Nr. 3 (30.04.2021): 53–69. http://dx.doi.org/10.24840/2183-6493_007.003_0005.

Der volle Inhalt der Quelle

Annotation:

Additive manufacturing (AM) is one of the most trending technologies nowadays, and it has the potential to become one of the most disruptive technologies for manufacturing. Academia and industry pay attention to AM because it enables a wide range of new possibilities for design freedom, complex parts production, components, mass personalization, and process improvement. The material extrusion (ME) AM technology for metallic materials is becoming relevant and equivalent to other AM techniques, like laser powder bed fusion. Although ME cannot overpass some limitations, compared with other AM technologies, it enables smaller overall costs and initial investment, more straightforward equipment parametrization, and production flexibility.This study aims to evaluate components produced by ME, or Fused Filament Fabrication (FFF), with different materials: Inconel 625, H13 SAE, and 17-4PH. The microstructure and mechanical characteristics of manufactured parts were evaluated, confirming the process effectiveness and revealing that this is an alternative for metal-based AM.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Klimaschewski, Sven F., Robert Raschke und Mark Vehse. „Additive manufacturing for health technology applications“. Journal of Mechanical and Energy Engineering 3, Nr. 3 (23.12.2019): 215–20. http://dx.doi.org/10.30464/jmee.2019.3.3.215.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Matos, Florinda, und Celeste Jacinto. „Additive manufacturing technology: mapping social impacts“. Journal of Manufacturing Technology Management 30, Nr. 1 (21.01.2019): 70–97. http://dx.doi.org/10.1108/jmtm-12-2017-0263.

Der volle Inhalt der Quelle

Annotation:

Purpose Recent developments in additive manufacturing (AM) technology have emphasized the issue of social impacts. However, such effects are still to be determined. So, the purpose of this paper is to map the social impacts of AM technology. Design/methodology/approach The methodological approach applied in this study combines a literature review with computer-aided content analysis to search for keywords related to social impacts. The content analysis technique was used to identify and count the relevant keywords in academic documents associated with AM social impacts. Findings The study found that AM technology social impacts are still in an exploratory phase. Evidence was found that several social challenges of AM technology will have an influence on the society. The topics associated with fabrication, customization, sustainability, business models and work emerged as the most relevant terms that can act as “pointers” to social impacts. Research limitations/implications The research on this subject is strongly conditioned by the scarcity of empirical experience and, consequently, by the scarcity of data and publications on the topic. Originality/value This study gives an up-to-date contribution to the topic of AM social impacts, which is still little explored in the literature. Moreover, the methodological approach used in this work combines bibliometrics with computer-aided content analysis, which also constitutes a contribution to support future literature reviews in any field. Overall, the results can be used to improve academic research in the topic and promote discussion among the different social actors.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Fuller, Scott C., und Michael G. Moore. „Additive manufacturing technology in reconstructive surgery“. Current Opinion in Otolaryngology & Head and Neck Surgery 24, Nr. 5 (Oktober 2016): 420–25. http://dx.doi.org/10.1097/moo.0000000000000294.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Park, Jinsu, Kyungteak Kim und Hanshin Choi. „Technology Trend of Construction Additive Manufacturing“. Journal of Korean Powder Metallurgy Institute 26, Nr. 6 (31.12.2019): 528–38. http://dx.doi.org/10.4150/kpmi.2019.26.6.528.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Choi, Hanshin, und Jinsu Park. „Technology Trend of Additive Manufacturing Standardization“. Journal of Korean Powder Metallurgy Institute 27, Nr. 5 (30.10.2020): 420–28. http://dx.doi.org/10.4150/kpmi.2020.27.5.420.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Kovalchuk, D. V., V. I. Melnik, I. V. Melnik und B. A. Tugaj. „New possibilities of additive manufacturing using Xbeam 3D metal printing technology (Review)“. Paton Welding Journal 2017, Nr. 12 (28.12.2017): 16–22. http://dx.doi.org/10.15407/tpwj2017.12.03.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Narahara, Hiroyuki. „Die and Mould Manufacturing Enhanced by Additive Manufacturing Technology“. Seikei-Kakou 26, Nr. 4 (20.03.2014): 148–53. http://dx.doi.org/10.4325/seikeikakou.26.148.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Hao, Botao, und Guomin Lin. „Additive manufacturing technology and its application in die manufacturing“. IOP Conference Series: Earth and Environmental Science 632 (14.01.2021): 022077. http://dx.doi.org/10.1088/1755-1315/632/2/022077.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

MORI, Takanori. „Manufacturing Innovation through the Introduction of Additive Manufacturing Technology“. Proceedings of Mechanical Engineering Congress, Japan 2020 (2020): F04103. http://dx.doi.org/10.1299/jsmemecj.2020.f04103.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Choi, Hanshin, Jong Min Byun, Wonsik Lee, Su-Ryong Bang und Young Do Kim. „Research Trend of Additive Manufacturing Technology − A=B+C+D+E, add Innovative Concept to Current Additive Manufacturing Technology: Four Conceptual Factors for Building Additive Manufacturing Technology −“. Journal of Korean Powder Metallurgy Institute 23, Nr. 2 (30.04.2016): 149–69. http://dx.doi.org/10.4150/kpmi.2016.23.2.149.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Liu, Yan, Anna Du, Guishen Zhou und Jiapeng Liu. „Metal Powder and Wire Additive Manufacturing Technology“. E3S Web of Conferences 213 (2020): 01020. http://dx.doi.org/10.1051/e3sconf/202021301020.

Der volle Inhalt der Quelle

Annotation:

Additive manufacturing technology can quickly manufacture parts with dense microstructures and excellent mechanical properties, so that it shows a broad application prospect in aerospace and other fields. Additive manufacturing technology was briefly introduced in this paper. On this basis, the technology and characteristics of metal powder and wire additive manufacturing were systematically analyzed and compared, and the development of additive manufacturing technology was prospected.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

P. Cooper, Khershed, und Ralph F. Wachter. „Cyber-enabled manufacturing systems for additive manufacturing“. Rapid Prototyping Journal 20, Nr. 5 (12.08.2014): 355–59. http://dx.doi.org/10.1108/rpj-01-2013-0001.

Der volle Inhalt der Quelle

Annotation:

Purpose – The purpose of this paper is to study cyber-enabled manufacturing systems (CeMS) for additive manufacturing (AM). The technology of AM or solid free-form fabrication has received considerable attention in recent years. Several public and private interests are exploring AM to find solutions to manufacturing problems and to create new opportunities. For AM to be commercially accepted, it must make products reliably and predictably. AM processes must achieve consistency and be reproducible. Design/methodology/approach – An approach we have taken is to foster a basic research program in CeMS for AM. The long-range goal of the program is to achieve the level of control over AM processes for industrial acceptance and wide-use of the technology. This program will develop measurement, sensing, manipulation and process control models and algorithms for AM by harnessing principles underpinning cyber-physical systems (CPS) and fundamentals of physical processes. Findings – This paper describes the challenges facing AM and the goals of the CeMS program to meet them. It also presents preliminary results of studies in thermal modeling and process models. Originality/value – The development of CeMS concepts for AM should address issues such as part quality and process dependability, which are key for successful application of this disruptive rapid manufacturing technology.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Zhang, Kai, Xiao Feng Shang und Lei Wang. „Laser Transmission Technology of Laser Additive Manufacturing“. Applied Mechanics and Materials 380-384 (August 2013): 4315–18. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.4315.

Der volle Inhalt der Quelle

Annotation:

The laser additive manufacturing technology is a laser assisted direct metal manufacturing process. This process offers the ability to make a metal component directly from CAD drawings. The manufacturing equipment consists of some components. Among them, the laser transmission component plays an important role in the whole fabricating process. It provides the energy source to melt the metal powder, so it is necessary to develop the laser transmission technology. This technology is achieved primarily by laser generator system and optical path transmission system. The related structure design and function implementation prove that the laser transmission technology can generate desirable laser power at precise assigned position, and complete the manufacturing process with flying colors.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Serenó, L., J. Delgado und Joaquim de Ciurana. „Customizing Food with an Additive Manufacturing Technology“. Materials Science Forum 713 (Februar 2012): 43–48. http://dx.doi.org/10.4028/www.scientific.net/msf.713.43.

Der volle Inhalt der Quelle

Annotation:

The development of open Additive Manufacturing (AM) technologies, such as the Fab@Home system, has emerged as a freeform approach capable of producing complex three-dimensional objects with a broad variety of materials. The main objective of this work is to analyze and optimize the manufacturing capacity of this system when producing 3D edible objects. A new heated syringe deposition tool was developed and several process parameters were optimized to adapt this technology to consumers needs. The results revealed in this study show the potential of this system to produce customized edible objects without qualified personnel knowledge, therefore saving manufacturing costs compared to traditional technologies.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Koptyug, Andrey, Lars-Erik Rännar, Mikael Bäckström, M. Sc Sanna Fager Franzén und DDS Per Dérand. „ADDITIVE MANUFACTURING TECHNOLOGY APPLICATIONS TARGETING PRACTICAL SURGERY“. International Journal of Life Science and Medical Research 3, Nr. 1 (27.02.2013): 15–24. http://dx.doi.org/10.5963/lsmr0301003.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Mahamood, R. M., S. A. Akinlabi, M. Shatalov, E. V. Murashkin und E. T. Akinlabi. „Additive Manufacturing / 3D Printing Technology: A Review“. Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology 30 (18.12.2019): 51–58. http://dx.doi.org/10.35219/awet.2019.07.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Shulunov, Vyacheslav R. „Enhanced Roll Powder Sintering Additive Manufacturing Technology“. International Journal of Automation and Smart Technology 8, Nr. 1 (01.03.2018): 1–8. http://dx.doi.org/10.5875/ausmt.v8i1.1597.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Shulunov, Vyacheslav R. „A Roll Powder Sintering Additive Manufacturing Technology“. Applied Mechanics and Materials 789-790 (September 2015): 1212–16. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.1212.

Der volle Inhalt der Quelle

Annotation:

This paper describes the roll powder sintering (RPS) technology providing breakthrough advantages for dominant rapid prototyping and manufacturing (RP&M) processes that are currently on the market. The RPS based on ribbon perforation where a powder needs to be poured, while it is being rewound. When the whole component roll is rewound, it is ready for a sintering plant. This technology has increased reliability, higher precision up to 77000 dpi, lower cost and power consumption. Processing time of plastic, ceramic, metal and other objects 1 m3 (or more) in volume directly from a 3D CAD model with a layer thickness of 30 μm is about 1 hour.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

KIRIHARA, Soshu. „Materials Tectonics Technology and Stereolithographic Additive Manufacturing“. Journal of Smart Processing 7, Nr. 6 (2018): 223–28. http://dx.doi.org/10.7791/jspmee.7.223.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Cooke, Shaun, Keivan Ahmadi, Stephanie Willerth und Rodney Herring. „Metal additive manufacturing: Technology, metallurgy and modelling“. Journal of Manufacturing Processes 57 (September 2020): 978–1003. http://dx.doi.org/10.1016/j.jmapro.2020.07.025.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

TATEISHIT, Motoharu, und Kengo Yoshida. „Introduction of additive manufacturing process simulation technology“. Proceedings of The Computational Mechanics Conference 2018.31 (2018): 126. http://dx.doi.org/10.1299/jsmecmd.2018.31.126.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Kenzari, S., D. Bonina, A. Degiovanni, J. M. Dubois und V. Fournée. „Quasicrystal-Polymer Composites for Additive Manufacturing Technology“. Acta Physica Polonica A 126, Nr. 2 (August 2014): 449–52. http://dx.doi.org/10.12693/aphyspola.126.449.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Oh, Ji-Won, Hyunwoong Na und Hanshin Choi. „Technology Trend of the additive Manufacturing (AM)“. Journal of Korean Powder Metallurgy Institute 24, Nr. 6 (31.12.2017): 494–507. http://dx.doi.org/10.4150/kpmi.2017.24.6.494.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Shulunov, Vyacheslav R. „Advanced roll powder sintering additive manufacturing technology“. International Journal on Interactive Design and Manufacturing (IJIDeM) 12, Nr. 3 (28.03.2018): 1109–17. http://dx.doi.org/10.1007/s12008-018-0475-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Guo, Nannan, und Ming C. Leu. „Additive manufacturing: technology, applications and research needs“. Frontiers of Mechanical Engineering 8, Nr. 3 (08.05.2013): 215–43. http://dx.doi.org/10.1007/s11465-013-0248-8.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Agrawal, Manoj Kumar. „Additive Manufacturing: Advances in Trends and Technology“. Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, Nr. 1S (11.04.2021): 452–58. http://dx.doi.org/10.17762/turcomat.v12i1s.1903.

Der volle Inhalt der Quelle

Annotation:

The latest process involved in the design, development and delivery of products to the end users has been implemented utilizing additive manufacturing (AM) or three-dimensional (3D) printing. This technology provides a great deal of freedom in the production of complicated parts, highly personalized goods and effective waste reduction. The new technological and Industrial revolution, utilizes the incorporation of intelligent fabrication and CAD processes. Via its various advantages, such as time and material savings, rapid prototyping, has enhanced productivity as well as distributed manufacturing processes, where AM actively participates and plays significant role in the industrial advancements. This paper is intended to conduct an analytical review of the latest developments and technological aspects in the AM innovation. This paper also explores the viability of the additive manufacturing mechanism as well as the advantages of the product in global, social and ecological fields. At last, the paper finishes with an outline of AM's potential in technologies, implementations and products developments, which will generate new concepts for AM discovery in the coming years..

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Chu, Ming Qiang, Lei Wang, Hong Yu Ding und Zhong Gang Sun. „Additive Manufacturing for Aerospace Application“. Applied Mechanics and Materials 798 (Oktober 2015): 457–61. http://dx.doi.org/10.4028/www.scientific.net/amm.798.457.

Der volle Inhalt der Quelle

Annotation:

Additive manufacturing (AM) offers a potential for time and cost savings, especially for aerospace components made from costly titanium alloys. Owning to advantages such as its ability to form complex component, good surface quality, fine microstructure, excellent property, etc, it is attracting increasing attention. Much work has been done in recent years, including manufacturing facility, processing technology and specification. Here we summarize the development and status of AM technology, the underlying problems and its application perspective on civil aircraft.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Liu, Dan, Boyoung Lee, Aleksandr Babkin und Yunlong Chang. „Research Progress of Arc Additive Manufacture Technology“. Materials 14, Nr. 6 (15.03.2021): 1415. http://dx.doi.org/10.3390/ma14061415.

Der volle Inhalt der Quelle

Annotation:

Additive manufacturing technology is a special processing technology that has developed rapidly in the past 30 years. The materials used are divided into powder and wire. Additive manufacturing technology using wire as the material has the advantages of high deposition rate, uniform composition, and high density. It has received increasingly more attention, especially for the high efficiency and rapid prototyping of large-size and complex-shaped components. Wire arc additive manufacturing has its unique advantages. The concept, connotation, and development history of arc additive manufacturing technology in foreign countries are reviewed, and the current research status of arc-based metal additive manufacturing technology is reviewed from the principles, development history, process, and practical application of arc additive manufacturing technology. It focuses on the forming system, forming material, residual stress and pores, and other defect controls of the technology, as well as the current methods of mechanical properties and process quality improvement, and the development prospects of arc additive manufacturing technology are prospected. The results show that the related research work of wire arc additive manufacturing technology is still mainly focused on the experimental research stage and has yet not gone deep into the exploration of the forming mechanism. The research work in this field should be more in-depth and systematic from the physical process of forming the molten pool system from the perspectives of stability, the organization evolution law, and performance optimization. We strive to carry out wire arc additive forming technology and theoretical research to promote the application of this technology in modern manufacturing.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Khorram Niaki, Mojtaba, Fabio Nonino, Giulia Palombi und S. Ali Torabi. „Economic sustainability of additive manufacturing“. Journal of Manufacturing Technology Management 30, Nr. 2 (28.02.2019): 353–65. http://dx.doi.org/10.1108/jmtm-05-2018-0131.

Der volle Inhalt der Quelle

Annotation:

Purpose The purpose of this paper is to investigate additive manufacturing (AM) phenomenon extending previous research results by studying in-depth the economic sustainability of AM technology and bringing out the contextual factors that drive its superior performances in comparison with conventional manufacturing, and justify its adoption in rapid prototyping (RP) from an economic point of view. Design/methodology/approach Data have been collected through a worldwide survey. Respondents were from 105 companies adopting the technology from 23 countries worldwide. Findings The results of this research show that although AM-based prototyping leads to significant cost reduction, it is not as good as conventional manufacturing in terms of the profitability of investment. It also demonstrates how cost reduction depends on production volume and payback period depends on the types of material and scope of AM implementation after controlling for firm size and experience. Research limitations/implications The performance indicator is measured using a Likert scale; however, more reliable conclusion could be made by real amounts. The research also took into account the economic aspects of performance; however, to evaluate the AM technology more comprehensively, other performance measures such as those of social and environmental ones should be considered. Practical implications The paper provides insightful implications for the adoption of AM. In particular, it reveals the contingent performance of the technology in RP. Originality/value This paper contributes to expand the literature by demonstrating how different circumstances affect the performance of AM technologies for prototyping and by linking the operational and organizational factors with its performance.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Li, Jiaming, Chuangkai Li, Yun Chen, Nan Zhao, Zhiyun Hou, Qingmao Zhang und Guiyao Zhou. „Broadband fluorescence emission in Bi-doped silica glass prepared by laser additive manufacturing technology“. Chinese Optics Letters 18, Nr. 12 (2020): 121601. http://dx.doi.org/10.3788/col202018.121601.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Martens, Robert, Susan K. Fan und Rocky J. Dwyer. „Successful approaches for implementing additive manufacturing“. World Journal of Entrepreneurship, Management and Sustainable Development 16, Nr. 2 (08.04.2020): 131–48. http://dx.doi.org/10.1108/wjemsd-12-2019-0100.

Der volle Inhalt der Quelle

Annotation:

PurposeThe purpose of this qualitative, multiple-case study was to explore the successful strategies that managers of light and high-tech small and medium-sized manufacturing companies in the Netherlands, use to adopt additive manufacturing (AM) technology into their business models.Design/methodology/approachA qualitative, multiple-case study approach was used. The participants for this study consisted of executive-level managers of light and high-tech manufacturing companies in the Netherlands. Company documents were studied, and individual interviews were undertaken with participants to gain an understanding of the strategies they used to adopt AM technology into their business models.FindingsThree significant themes emerged from the data analysis: identify business opportunities for AM technology, experiment with AM technology and embed AM technology.Research limitations/implicationsThe findings of this study could be of advantage to industry leaders and manufacturing managers who are contemplating to adopt AM in their business models.Originality/valueThis study may contribute to the further proliferation of AM technology. Industry leaders may also gain a clearer understanding of the effects of 3DP on local employment. The results of the study may also work as a catalyst for increased awareness for manufacturing firm leaders who have not yet considered the opportunities and threats AM technology presents to their organizations.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Ullah, A. M. M. Sharif, D. M. D’Addona, Khalifa H. Harib und Than Lin. „Fractals and Additive Manufacturing“. International Journal of Automation Technology 10, Nr. 2 (04.03.2016): 222–30. http://dx.doi.org/10.20965/ijat.2016.p0222.

Der volle Inhalt der Quelle

Annotation:

Fractal geometry can create virtual models of complex shapes as CAD data, and from these additive manufacturing can directly create physical models. The virtual-model-building capacity of fractal geometry and the physical-model-building capacity of additive manufacturing can be integrated to deal with the design and manufacturing of complex shapes. This study deals with the manufacture of fractal shapes using commercially available additive manufacturing facilities and 3D CAD packages. Particular interest is paid to building physical models of an IFS-created fractal after remodeling it for manufacturing. This article introduces three remodeling methodologies based on binary-grid, convex/concave-hull, and line-model techniques. The measurements of the manufactured fractal shapes are also reported, and the degree of accuracy that can be achieved by the currently available technology is shown.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Gawel, Tomasz Grzegorz. „Review of Additive Manufacturing Methods“. Solid State Phenomena 308 (Juli 2020): 1–20. http://dx.doi.org/10.4028/www.scientific.net/ssp.308.1.

Der volle Inhalt der Quelle

Annotation:

The manuscript reviews the additive manufacturing technology. The principle of operation of the most popular and new AM methods was discussed. the manuscript presents the possibility of skewing different materials for individual technologies. Additive manufacturing technologies have been described that can manufacture parts from polymers, metals, ceramics and composites.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Ma, Xue Liang. „Application Prospect of Additive Manufacturing Technology in 3D Printing“. Advanced Materials Research 803 (September 2013): 409–12. http://dx.doi.org/10.4028/www.scientific.net/amr.803.409.

Der volle Inhalt der Quelle

Annotation:

The additive manufacturing has become an important development direction of advanced manufacturing technology, the technology will be developed in three directions: the first is the daily consumer goods manufacturing direction; the second is a functional parts manufacturing; the third is the integration of organization and structure of manufacture. The key technologies are needed to solve in the future included: precision control technology, efficient manufacturing technology, composite parts manufacturing technology.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

KYOGOKU, Hideki, und Toshi-Taka IKESHOJI. „New Development of Metal Laser Additive Manufacturing Technology“. Journal of the Japan Society of Powder and Powder Metallurgy 66, Nr. 2 (15.02.2019): 89–96. http://dx.doi.org/10.2497/jjspm.66.89.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

NOMURA, Naoyuki, und Itaru MASUOKA. „Additive Manufacturing 3D Printing Technology and HIP/CIP“. Journal of the Japan Society of Powder and Powder Metallurgy 67, Nr. 2 (15.02.2020): 52. http://dx.doi.org/10.2497/jjspm.67.52.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

KYOGOKU, Hideki. „Progress in Laser Additive Manufacturing Technology of Metals“. JOURNAL OF THE JAPAN WELDING SOCIETY 83, Nr. 4 (2014): 250–53. http://dx.doi.org/10.2207/jjws.83.250.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Kianian, Babak, Sam Tavassoli, Tobias C. Larsson und Olaf Diegel. „The Adoption of Additive Manufacturing Technology in Sweden“. Procedia CIRP 40 (2016): 7–12. http://dx.doi.org/10.1016/j.procir.2016.01.036.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

González, J., I. Rodríguez, J.-L. Prado-Cerqueira, J. L. Diéguez und A. Pereira. „Additive manufacturing with GMAW welding and CMT technology“. Procedia Manufacturing 13 (2017): 840–47. http://dx.doi.org/10.1016/j.promfg.2017.09.189.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Matysik, Piotr, Dariusz Drożyński, Barbara Olszowska-Sobieraj, Justyna Grzegorek und Piotr Bubrowski. „TECHNOLOGY OF MANUFACTURING FOUNDRY CORES USING ADDITIVE METHODS“. Metallurgy and Foundry Engineering 43, Nr. 3 (2017): 189. http://dx.doi.org/10.7494/mafe.2017.43.3.189.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Duan Musen, 段沐森, 吴凡 Wu Fan und 刘瑞雪 Liu Ruixue. „Application of Laser Additive Manufacturing Technology in Ophthalmology“. Laser & Optoelectronics Progress 55, Nr. 1 (2018): 011406. http://dx.doi.org/10.3788/lop55.011406.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Guo, Shaoqing, Wei Liu, Shuai Huang und Qiao Xiang. „Development of Laser Additive Manufacturing Technology for Metals“. Chinese Journal of Engineering Science 22, Nr. 3 (2020): 56. http://dx.doi.org/10.15302/j-sscae-2020.03.009.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Zaharin, Haizum Aimi, Ahmad Majdi Abdul Rani, Turnad Lenggo Ginta und Farooq I. Azam. „Additive Manufacturing Technology for Biomedical Components: A review“. IOP Conference Series: Materials Science and Engineering 328 (März 2018): 012003. http://dx.doi.org/10.1088/1757-899x/328/1/012003.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Zeitschriftenartikel zum Thema „Technology of additive manufacturing“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an