Thematische Bibliographien / Systém vytápění / Dissertationen
Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Systém vytápění.

Dissertationen zum Thema „Systém vytápění“

Autor: Grafiati
Veröffentlicht am 28. Juni 2021
Zuletzt aktualisiert am 17. Februar 2022

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Dissertationen für die Forschung zum Thema "Systém vytápění" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Dissertationen für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Kopeček, Petr. „Decentralizovaný systém řízení vytápění budov“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217569.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with DCS for bulding control. The main aim was to develop a general system, which can be adapted according to the individual requirements and which should minimize costs too. Hardware modules, communication bus, communication protocol, system topology and regulation mechanisms, have been designed. Regulators have been set. There are introduced current realization and possible future extensions too. The high security and the high functionality topics are included.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Ambrož, Milan. „Systém domovního vytápění s hybridní komunikací“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-412969.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Mičulka, Lukáš. „Systém řízení vytápění objektu komunikující přes Zigbee“. Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237143.

Der volle Inhalt der Quelle
Annotation:
This thesis is focused on the design and implementation of heating controller system of the model house. In terms of design is the emphasis on simplicity, efficiency and scalability. Implemented heating controller system includes a central controller unit and modules that are placed around the model house and can perform several functions - temperature measurement, control actuators or remote parts of the wireless link. This thesis describes the complete development from the initial system design through assembly of all elements of hardware, firmware implementations for each module type and a control program running in the control unit. It also describes the communication between system elements. Suitably chosen solution combines wired and wireless connections, depending on how it is ideal in terms of the model house. The whole system of functional prototypes was tested and the results were summarized in the conclusion.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Hartmann, Jiří. „Správa a automatizace systému vytápění podniku“. Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2021. http://www.nusl.cz/ntk/nusl-445516.

Der volle Inhalt der Quelle
Annotation:
The aim of this work is to create a unified control and supervision system, SCADA, for controlling the heating and cooling of the company. The system is controlled by UniPi PLC units. Node-RED is used as control software. The user interface is created by an extension "dashboard". For communication between elements using the MQTT protocol. The InfluxDB database is used for data storage. The Grafana tool is used to visualize historical data. The majority of the created system consists of open software. The system is universal, expandable and it is possible to connect it with another system. The system can be used or adapted to similar problems of advanced heating control.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Koutecký, Jan. „Kamna v konceptu moderního vytápění“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225729.

Der volle Inhalt der Quelle
Annotation:
Thesis deals with stoves, considering them as the main source of heating. The theoretical part is focused on practical and theoretical stove designing and burnnig proces. The designing addresses three of the countless variations on the koncept of modern stove heating. Each variant is unique in its technical and design way of solution. Experiment affects the properties hypokaust stove.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Šoc, Matěj. „Systém pro automatické řízení a monitorování centrálního vytápění“. Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399195.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with design and implementation of wireless system for automated control and monitoring of central heating. Some of the existing solutions and their characteristics are briefly introduced at first. The attention in this thesis is subsequently given to the analysis of wireless technologies and power supply methods suitable for home automation. With regard to ascertained findings, the design and subsequent implementation of system modules using Raspberry Pi, the ARM Cortex-M0+ microcontroller and the ZigBee communication modules were performed. The firmware for created modules was designed and implemented. The designed system can be controlled and monitored using a mobile application for the Android platform, whose design is also described in this thesis.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Čoček, Bedřich. „Návrh větrání a vytápění rekonstruované části hospodářské usedlosti“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241885.

Der volle Inhalt der Quelle
Annotation:
The aim of thesis is to design the heating and ventilation system for reconstructed part of the farmhouse. Thesis contains calculation of the object heat output, from which the design of the heating system is based. This includes to choice of heat sources, heaters and others components of the system. Thesis also contains hydraulic regulation of heating system. Design of equal-pressure ventilation system includes calculation of required amount of air, choice of unit, air conduit draft and options of terminal components and their settings. In the framework of this thesis is also designed simple photovoltaic system for warming hot water. There was created relevant drawing documentation for design of systems.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Lampa, Jan. „Vytápění historického objektu alternativními palivy“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226840.

Der volle Inhalt der Quelle
Annotation:
The introduction of theoretical part deals with issue of fuel. There are basic kinds of fuels, their properties and calorific values. In next part a summary of types of boilers depending on the kind of fuel is described. A process of burning in each type is discussed. Then the basic issue of heat transmission, heat losses and design of individual elements of central heating system is described. In the second part there are two studies compared to each other. In the first one an automatic pellet boiler is used as a source of energy and in the second one it’s a heat pump, type air-water. At the end both of the variants are reviewed and the better option is chosen. In the last part the better option is designed, into detailed design documentation. Important design values for using the heating system and hot water service are calculated.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Tretera, Robin. „Návrh tepelného čerpadla pro vytápění rodinného domu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377038.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis provides basic information about the thermal pumps and photovoltaic systems. The heat pumps are described regarding their construction and sources of low potential heat. The description of photovoltaic systems explains the main principle of transformation the solar light to electric power and possible cooperation of this systems with the heat pumps. In practical part of the thesis there is a description of the assessed building and calculation of its thermal losses. It is followed by three designs of the thermal pump systems which are supposed to replace the original way of heating - the electric boiler. One of the designs is supported by photovoltaic system. The final part of the thesis provides the calculation of required heat sources for house and water heating, the operation expanses of all three heat pump designs, prices of electric energy and economical reliability of described solutions.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Prudek, Miroslav. „Automatické řízení pro vytápění výrobní haly“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228999.

Der volle Inhalt der Quelle
Annotation:
The graduation thesis is focused on the automatic operating of heating of the production hall of První brněnská strojírnaVelká Bíteš, a.s. The thesis consists of an analysis of present state of the heating technology and solution of the general conception of the automatic operating of the heating. Integrated part of the conception is heat-up of the supply water and drain off of the condensation water from the air heating units. Outcome of this graduation thesis is a design of the algorithm for operating of the regulated system. Remote supervision and control of the regulated system shall be ensured by the visualization setting, which shall be implemented into the station of dispatching centre. The accuracy of the design of the part of regulated system shall be validated as a design of PID regulator with the use of “Matlab” program and it´s module “Simulink”. To set up parameters of the PID regulator, “Ziegler-Nichols” method shall be applied. The objective pay-off period of investments for regulation controlling system is figured out as a part of this thesis as well.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
11

Jára, Marek. „Vytápění bytového domu“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409867.

Der volle Inhalt der Quelle
Annotation:
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
12

Černík, Václav. „Návrh vzduchotechniky a vytápění pro výrobní podnik“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230487.

Der volle Inhalt der Quelle
Annotation:
This master’s thesis deals with heating and HVAC in production plant ELMET, spol. s r.o. The first part of the thesis concerns reconstruction of the central heating system, which is outdated and unreliable in the time of the writing of the thesis. The second part deals with cooling of mounting of electronics, where technological requirements are not met due to summer overheating. The third part of the thesis concerns ventilation of metalworking hall using waste heat from production machines.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
13

Niemczyk, Roman. „Návrh vytápění a větrání dřevěné roubenky v podhorské oblasti“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442826.

Der volle Inhalt der Quelle
Annotation:
This master´s thesis deals with calculations of heat losses, design of ventilation and heating of a two-storey family house. Part of the thesis is the characteristics and description of the building, calculation of heat losses according to the standard ČSN EN 12831-1. Furthermore, the heating system is designed, including the choice of heat sources, calculation of underfloor heating and pressure losses. Subsequently, forced ventilation is proposed with heat recovery. The last part assesses the possibility of using a photovoltaic system for the object. Relevant technical documentation is also prepared for the proposals.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
14

Jelínek, Ondřej. „Vytápění objektu plynovou kotelnou a solárním doohřevem vody“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227821.

Der volle Inhalt der Quelle
Annotation:
Proposal for heating and water warming of rehabilitation centre. The first part of the project analyses given topic, the matter of calculating heat losses and heating elements proposal. It also deals with heat source for heating, fuel for boilers and condensation boilers functioning. The second part covers the technical design of the theme and the third part deals with the solar system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
15

Trajer, Štěpán. „Zdroje tepla pro vytápění občanské budovy“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240240.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
16

Štefková, Daniela. „Aplikace obnovitelných zdrojů energie pro vytápění rodinného domu v Bosně a Hercegovině“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225993.

Der volle Inhalt der Quelle
Annotation:
Diploma thesis is focused on renewable energy sources and its applications for heating of family house in Bosnia and Herzegovina. The project contains two design variants which are described in part B in detail. Alternatives are compared in conclusion and the most suitable one is chosen for given building. The part of experimental solution deals with measurement of solar intensity and air temperature in Bosnia and Herzegovina and in the Czech Republic. Obtained data are processed, compared and graphically represented. Experimental part also includes stationary state simulation of floor heating carried out in CalA software. Simulations were made in different variants.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
17

Husák, Ondřej. „Optimalizace vytápění rodinných domů s využitím obnovitelných zdrojů energie“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242148.

Der volle Inhalt der Quelle
Annotation:
The thesis contains is familiar with the issues of renewable energy and global warming. Assessing the use of these resources in households in the Czech Republic. The selected family house, perform measurements on the existing heating system. In conclusion, there is suggestions for optimalization system houses, the possibility of linking the with renewable energy sources and an assessment of economic turn.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
18

Musil, Zdeněk. „Teplovzdušný vytápěcí a větrací systém pro nízkoenergetický rodinný dům“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230423.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis deals with warm-air heating and ventilation system of energyefficient family house. The part of thesis is theoretical introduction to low-energy and passive houses, ventilation and heating. The proposal itself is based on the applicable standards and includes all progressive steps, including the calculation of the thermal performance and sizing individual parts of the system. The drawing project documentation is listed in appendixes.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
19

Almabrok, Almabrok Abdoalhade. „Analýza možností využití tepla pro ohřev teplé užitkové vody, vytápění a chlazení domácností“. Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-233652.

Der volle Inhalt der Quelle
Annotation:
Rostoucí světová poptávka po méně efektivních zdrojích energie vede ke zvýšení zájmu o kogenerační technologie v sektoru domácností. Pomocí této technologie lze významně snižovat množství znečišťujících látek emitovaných při výrobě elektřiny a tepla pro domácnosti. Kogenerační systémy v sektoru domácností nabízí možnost produkce jak užitného tepla a elektřiny z jednoho zdroje paliva, např. motorové nafty či zemního plynu. Tato práce se zaměřuje na analýzu možností užití kogeneračních a tri-generačních technologií ke zlepšení efektivity využití primárního zdroje energie, zejména v zemích severní Afriky. První část práce se orientuje na obecné definice v oblasti elektroenergetiky, aktuální i budoucí výhled energetické bilance v Libyi. Následující kapitoly se věnují kogeneračním a tri-generačních systémům, jejich charakteristikám se zaměřením na technické parametry, výhodám a nevýhodám těchto systémů a jejich dalšímu rozvoji. Hlavní část práce se zabývá problematikou spotřeby typických rodinných domů ve třech nejdůležitějších městech Libye. Dále předkládá citlivostní analýzu, která je zaměřená na výpočet množství energie vyžadované k pokrytí energetických potřeb typického domu (vytápění, ohřev vody a klimatizace) a porovnání naplnění těchto potřeb při uvažování technických a ekonomických hledisek. Výsledky práce budou využity pro tvorbu pokladů pro Libyjské energetické úřady.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
20

Čukat, Stanislav. „Návrh solárního ohřevu vody a solárního přitápění v rodinném domě“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230354.

Der volle Inhalt der Quelle
Annotation:
The master’s thesis deals with the design of solar assisted space heating and domestic hot water (DHW) heating in a detached single family dwelling. The thesis contains the heating load calculations as well as the calculation of the energy consumption for space and DHW heating. The thesis also contains the actual design and sizing of the heating system including the drawings. A simulation of solar heating was carried out with the use of the TRNSYS simulation tool in order to assess the yield of the solar heating system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
21

Houzar, Tomáš. „Analýza tepelné spotřeby objektu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-319291.

Der volle Inhalt der Quelle
Annotation:
Master’s thesis is focused on analysis of thermal consumption in the buiding. This work describes current state of family house and possible suggestions for heating and water heating. Part of solution is created program, which supposed to serve as universal calculation program for design and economic evaluation of suggested solar systém and allows a comparison between commonly used sources for heating and water heating.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
22

Kořínek, Vladimír. „Návrh ekologického vytápění rodinného domu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399500.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with the design of ecological heating for a family house. The main objective is to find the most advantageous variant of the heating and water heating system using a heat pump in cooperation with an alternative heating system. Thermal losses are calculated for the selected object, and several heating designs are made based on the calculations. Then the economic return of the designs is calculated.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
23

Macík, Ondřej. „Řešení strojoven u zdrojů tepla“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392040.

Der volle Inhalt der Quelle
Annotation:
The content of diploma thesis is a solution for heating and warm water preparation with application of an experimental measuring. My experimental measuring is experimental block. The block unifies parts of heating in boiler room in one system. The main object of this diploma was to learn to control the block and to measure important working status. In the second part was applied in first variant normal connection of boiler and in second variant was applied the block. The teoretical part is description of normal connection of boiler and development from other block systems to experimental block.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
24

Kovářík, Tomáš. „Tepelná čerpadla země - voda“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226841.

Der volle Inhalt der Quelle
Annotation:
Master’s thesis deals with the theme in three parts theoretical, practical and experimental. Project deals with heating nursery school and experiment deals with capacity reduction borehole heating exchanger for ground – source heat pump.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
25

Szalay, Patrik. „Realizace terminálu pro vzdálenou vizualizaci a ovládání obytného domu“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316380.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with the modification of an existing device for controlling the heating system of the house. The original proposal builds on my bachelor thesis Terminal for visualization and control conditions in a house. Adjustments are based on the findings of the test operation and the deficiencies found in everyday operations. Here, the emphasis is on simple design, low acquisition cost and durability of the resulting device. Newly designed wireless units will replace the original wired sensors, as well as the control unit of the existing device based on the prototype system will be replaced with a new wireless central unit. The alphanumeric display with control buttons will remain as the control panel of this unit. The wireless central unit is connected via a serial communication interface to the visualization and control unit, which extends the offered options of the heating control system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
26

Rohlíková, Věra. „Teplovzdušné vytápění“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226009.

Der volle Inhalt der Quelle
Annotation:
The subject of this master's thesis is warm air heating system. The task is to apply this heating method to a specified building and to design technical solutions. The degree of completion of the extended project is appropriate for the requirements of building permit documentation. Proposed solutions were evaluated in the viewpoint of inner environment, space requirements, operation economy and environmental impact. Warm air heating system made by Atrea is used for building heating. The text part of the thesis deals with building air permeability and the experimental part describes performance of blower door test in a family house and evaluation of experiment data
APA, Harvard, Vancouver, ISO und andere Zitierweisen
27

Dufek, Martin. „Vytápění bytového domu“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225581.

Der volle Inhalt der Quelle
Annotation:
The main concern of this thesis is to design heating system for 5 storey apartment building in two alternatives of heat source - with a heat pump and with traditional gas boiler. Both applications are connected to two-pipes distribution system in building using the low-temperature water and radiators. The proposal takes account of the the production of hot water. The one of aims is to compare both variants also from the economic point of view. The experimental part is divided into two parts. The first part deals with the obligation to control efficiency of boilers, imposed by the Energy efficiency law No. 177/2006 Co. and § 6, sect. 2 - 5 and related regulation No. 276/2007 Co. The second part deals with the assessment of monitored room for proper regulation of the heating system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
28

Šedý, Martin. „Tepelné čerpadlo v trivalentním systému vytápění“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227961.

Der volle Inhalt der Quelle
Annotation:
Thesis deals with the usage of energy from recoverable resources. Theoretical part of thesis includes the description of the utilisation of heating pumps, solar radiation and biomass. The real status of the implementation is described in the second part of the thesis. Last part of the thesis contains the energy and economy valuation of real implementation.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
29

Kašpar, Ondřej. „Návrh a implementace systému vytápění objektu“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229891.

Der volle Inhalt der Quelle
Annotation:
The aim of this diploma paper is to design and implement a system of heating and irrigation. The system was designed for the premises of the garden shop located in Nové Město na Moravě. The new system shall replace the existing one as well as eliminate the use of human resources. The irrigation is done through a system of water pumps implemented in each of four green-houses. The heating is achieved through a system of hot air devices, and uses water as a transfer medium. The water is heated in a boiler using the new generation of solid propellants. The boiler is supplemented by solar collectors placed on the roof of the shop premises. The process is controlled by one of the programmable automatic devices made by Siemens, namely the S7-200 model. Temperature and humidity sensors are responsible for collection of the data. The paper also describes the technologies used and considered, the development environment and the construction components.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
30

Čech, Lubomír. „Optimalizace vytápění ZŠ Budišov“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228034.

Der volle Inhalt der Quelle
Annotation:
The subject of the diploma thesis is an optimization of a heating system of a basic school Budisov, Czech Republic. The objective of the thesis is to design a change of the fuel basis of the heating system. The designed changes of heating system are compared with the current state with respect to both, technical and economical aspects. The known values of fuel consumption in the last seven year period and the heating power of fuel are considered. For the comparison of the complexity of the proposed change of the heating system the realization and recovery of investment are the main factors.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
31

Slovák, Zdeněk. „Vytápění polyfunkčního objektu“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226865.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with the design of the heating system in a Polyfunctional building. The design is solving heating of a Polyfunctional Object in Kostelec nad Ohří. The building has basement and two floors. The building is heated by means of panel, tubular and floor convector heaters. The source of the heat is located in the boiler room in the basement.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
32

Fišer, Petr. „Návrh vytápění rodinného domu s vnitřním bazénem“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228291.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
33

Macek, Jiří. „Návrh vytápění dětského domova“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227539.

Der volle Inhalt der Quelle
Annotation:
This final thesis deals coucerned with design of heating in the children´s home. The object has basement and three floors. The objectis heated by means of panel and tubular heaters. The heat source (ga condensing boiler) is located in a technical room.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
34

Bendová, Martina. „Systémy se stěnovým vytápěním“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225560.

Der volle Inhalt der Quelle
Annotation:
This work deals with the topic "Systems with wall heating". On this theme is elaborated theoretical part. Further experimental part, which deals with the measurement of wall heating and comparing the results with the software CalA. Subsequently, this topic is applied to the specified building in which the wall heating, among other things dealt with. The project addresses the design of central heating, water heating, water heater design power units and air tempering lawn for future newly built free-standing facilities football club. The project is designed in two versions. In the first variant of the heat source heat pumps air-water. In the second variant is the heat source hot water pipe which is connected to transfer water-water station with plate heat exchangers.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
35

Míková, Šárka. „Vytápění bytového komplexu“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227537.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis focuses on the design of heating and hot water reservoir in an apartment complex. For three variants of heat sources (gas condensing boiler, heat pump and electric boiler) is evaluated their economic profitability for heating and hot water heating. For the best selected heat sources is drawn up the technical solution of heating in the apartment complex.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
36

Němec, Miloš. „Návrh vytápění rodinného domu“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230488.

Der volle Inhalt der Quelle
Annotation:
The present thesis deals with a design of a heating system for reconstructed family house. The heat loss was calculated according to ČSN EN 12831 Heating systems in buildings – Method for calculation of the heating load. The projected system was regulated. Hot water generation and the safety devices, such as safety valve or expansion tank, were designed. The total costs were calculated afterwards.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
37

Kozák, Karol. „Rekonstrukce vytápění školní budovy“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318385.

Der volle Inhalt der Quelle
Annotation:
This master's thesis pertains to designing a new heating system in secondary grammar school's building in the city of Vlašim. The old heating system is going to be replaced completely for a new system consisting of panel radiators and distribution piping network made of copper. Thesis includes technical description of old heating system and building itself, calculating of suggested heat efficiency using calculation software TechCON, selection of new panel radiators and appropriate dimensions of piping network , calculation and regulation of pressure losses, description of heat source and inspection of its safety components - expansion vessel and safety valve, determination of system for measurement and regulation as well as calculation of equithermal curves of this system. Last but not least total usage of heat is calculated. Blueprints of heating system are included as well.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
38

Dostál, Petr. „Systémy vytápění a chlazení v kancelářských provozech“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409862.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis deals with the design of the heating and cooling system, inclu-ding hot water preparation for the administrative part of the production hall. The first part of the thesis briefly discusses the history of heating and cooling of office buildings, legislative requirements and current solutions. The second part contains the design of the entire heating and cooling system with heat pump as a source of heat and cold. The final part of the thesis describes the experimental measure-ment and evaluation of the efficiency of the ice rink source.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
39

Doležel, Pavel. „Rekonstrukce vytápění v rodinném domě“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417142.

Der volle Inhalt der Quelle
Annotation:
The master’s thesis deals with the solid-fuel fired furnaces, complying with the new emission legislation, and their application in central heating. The introductory part of the thesis focuses on the theory of solid fuels combustion, pertinent legislation, and various designs of solid-fuel fired furnaces. The main part of the thesis deals with the design of a central heating system for a townhouse with a solid-fuel fired furnace as the primary heat source for central heating. A roof-mounted PV system was considered for solar-assisted domestic hot water heating. The energy performance of the house was evaluated with the use of the degree-day method and also with a detailed computer simulation in TRNSYS. As an appendix, the thesis includes the detailed engineering calculations and the engineering drawings and diagrams of the central heating system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
40

Sabelová, Jolanta. „Otopná tělesa pro ústřední vytápění“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225543.

Der volle Inhalt der Quelle
Annotation:
The task of the diploma thesis was the theoretical and experimental design of radiators for the central heating and the prepartion of conceptual design for a pension with a wellness centre in Ostrava. The building is a free-standing three-to five-floor cellarless building. The heating system will be designed for pension rooms and a social base; within the wellness centre, the heating of a fitness centre, whirlpools, and locker rooms will be designed. The heat source will be a gas boiler house. Ventilation in the accommodation part will be natural and forced in the wellness centre with respect to thermal comfort of visitors.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
41

Abíková, Klára. „Analýza možností vytápění rodinného domu“. Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-197656.

Der volle Inhalt der Quelle
Annotation:
The aim of this thesis is to analyze the possibility of heating the particular house and depending on the results to recommend appropriate option resp. type of fuel needed for heating. For this reason, the paper is primarily focused on general knowledge related to the issue of heating houses, which belong types of heating systems and heating options or heat loss or heat demand for heating. After all the general knowledge is applied to a particular house, which will serve as input for the analysis. Analysis of heating the house is subsequently determined not only from a cost point of view but also from a technical point of view and the output of recommending specific options for heating the house.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
42

Zaťková, Miroslava. „Tepelná čerpadla ve vytápění“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226003.

Der volle Inhalt der Quelle
Annotation:
This master´s thesis addresses heating of the new three - storey office building, which is located in Brno Pisárky. The heating system is designed as a low-temperature system with forced circulation of water using mostly panel radiators. As the heat source was designed two variants. The first heat source is the heat pump air - water, which is installationed inside. The second heat source is a gas condensing boiler. The part of design is preparation hot water. Ventilation of the building is equal-forced. Experimental part of master´s thesis is focused on measuring the amount of electricity produced per year by photovoltaic panels on the existing house in Brno Pisárky. Thesis also includes measuring outdoor temperature and intensity of solar radiation. The result is a comparison of the need for electricity for the heat pump for heating family house, total electricity consumption family house and amount of electricity produced by photovoltaic panels.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
43

Panovec, Jan. „Uplatnění energie obnovitelných zdrojů v budovách“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227660.

Der volle Inhalt der Quelle
Annotation:
The aim of this diploma thesis is to understand the functioning of heating and cooling systems in an administrative building built in passive standard using a renewable energy source. The thesis includes theoretical findings of heat pumps and designing the heating systems. The experimental part contains an analysis of working of heating and cooling systems in selected rooms in assigned building, which includes an experimental measurement of selected quantities and a thermographic measurement. In the last part of the thesis a comparison of measured and simulated values using simulation software was done.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
44

Plavec, Kamil. „Polyfunkční dům, Jihlava“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225774.

Der volle Inhalt der Quelle
Annotation:
Proposed office and apartment building is situated in the north-west area of the city of Jihlava. Office and apartment building is designed as four-storey detached house, flat roof with a single casing. There are three shops and common area in the 1st floor. In the second floor there are situated 4 apartments consisting of two rooms and a house cellar in the centre of the house. The third floor is of the same pattern as the second one. In the fourth floor there are 4 apartments consisting either of one room or three rooms and a house cellar in the centre of the house as well. The total number of the apartments is 12. The house is made of building system VELOX.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
45

Egermaier, Václav. „Bytový dům“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265332.

Der volle Inhalt der Quelle
Annotation:
This thesis summarizes my work on a new apartment building in Slovany, neighbourhood in Pilsen. My primary responsibility was to develop documentation for the project´s design and implementation. The building consists of four floors above ground, an underground floor and a flat roof. The building´s L-shaped plan, rebound 4th floor above ground and balconies lighten the mass of the building. The structural system of the building combined reinforced concrete system of the underground floor, column system of the 1st up to the 3rd floor above ground and wall system of the 4th floor above ground. The building is designed for six residential units with cellars, two garages, a relaxation room and a gym. The thesis includes the preparatory and study reports, architectural and construction solutions, and fire-safety building and construction site equipment solutions.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
46

Toboláková, Andrea. „Vytápění objektu se vzduchotechnikou“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372212.

Der volle Inhalt der Quelle
Annotation:
The main goal of the diploma thesis is to design a heating system and hot water heating for a newly built wellness hotel placed on the beach nearby reservoir Vranov. The theoretical part is focused on the build heating with solid fuels specifically pellets. In the calculation part is processed the proposal of heating systems, the heat sources, the water heater and other equipment. The last part of the project includes a technical report and drawing documentation at the level of implementation of the project.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
47

Aulehla, Jiří. „Návrh vytápění pro třípatrový řadový dům“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231125.

Der volle Inhalt der Quelle
Annotation:
This master`s thesis describes the design alterations that lead to a reduction in heat loss of the house, an extension of living space in the attic and the subsequent reconstruction of the heating system. The first is presentation of the house. After that, there is calculation heat loss of the house. The next step contains design of a reconstruction for every room and calculation modified heat loss. Another point this work is design the reconstruction of the heating system, extension heating system to the attic floor, calculation pressure losses and selection condensing gas boiler. After that is designed regulation with central control unit and electric thermostatic radiator valve. The last part of master`s thesis is focused on benefit assessment changes, budget and return of investment. The drawings are listed in the appendix.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
48

Kubátová, Anna. „Heating of building with almost zero energy consumption“. Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225687.

Der volle Inhalt der Quelle
Annotation:
The aim of the thesis is to model energetic needs for heating and temperatures progress in the building with almost zero energy consumption. The part of the work is the economical and energetic comparison. Proposed systems are based on a knowledge of active houses.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
49

Brudný, Tomáš. „Systém pro řízení stínicí a vytápěcí techniky v budově“. Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218688.

Der volle Inhalt der Quelle
Annotation:
The object of this project was to develop a device, which would by use to coordinate or control device wireless. The system divided to several independent devices, which assure high comfort for the user. The basic unit contains of touch panel which allow the user to control the system. The second unit is used for communication the system with GSM net. The third unit is used to coordinate the system from a PC. This unit makes possible data collection and their evaluation. This unit can as well control and coordinate any devises in the system. Part and parcel of this system are units which are used to drive the end consumers. The hole system is powered from a instead powers supply which is managed from a microprocessor. These devices make it possible, to the system to work without line voltage. The system is designed modular, so in the future it is possible to expand the system of others peripherals.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
50

Nešpor, Pavel. „Návrh vytápění pro nízkoenergetický rodinný dům“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229227.

Der volle Inhalt der Quelle
Annotation:
My diploma thesis is focused on design scheme of low-energy family house’s heating system. The goal of the first part of thesis is an introduction of the object following by calculations of transmission coefficients of heat through constructions and calculations of heat loss. Creation of proposal and calculation of underfloor heating output as well as panel and piped radiators and convectors are followed by proposal and calculation of dimensions of piping, pressure loss of underfloor loops, panel and piped radiators and convectors. The thesis also contains design of heating pump with bivalent heat electrical source, calculations of need of heat and calculations of total costs of working heating system as well as design of storage tank and accumulator for hot water. The last part of thesis is focused on control of the heat system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie