Thematische Bibliographien / Superconducting magnet energy storage

Auswahl der wissenschaftlichen Literatur zum Thema „Superconducting magnet energy storage“

Autor: Grafiati
Veröffentlicht am 25. Juli 2024
Zuletzt aktualisiert am 26. Juli 2024

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Inhaltsverzeichnis

Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Superconducting magnet energy storage" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Zeitschriftenartikel zum Thema "Superconducting magnet energy storage"

1

Jubleanu, Radu, und Dumitru Cazacu. „Design and Numerical Study of Magnetic Energy Storage in Toroidal Superconducting Magnets Made of YBCO and BSCCO“. Magnetochemistry 9, Nr. 10 (01.10.2023): 216. http://dx.doi.org/10.3390/magnetochemistry9100216.

Der volle Inhalt der Quelle
Annotation:
The superconducting magnet energy storage (SMES) has become an increasingly popular device with the development of renewable energy sources. The power fluctuations they produce in energy systems must be compensated with the help of storage devices. A toroidal SMES magnet with large capacity is a tendency for storage energy because it has great energy density and low stray field. A key component in the creation of these superconducting magnets is the material from which they are made. The present work describes a comparative numerical analysis with finite element method, of energy storage in a toroidal modular superconducting coil using two types of superconducting material with different properties bismuth strontium calcium copper oxide (BSCCO) and yttrium barium copper oxide (YBCO). Regarding the design of the modular torus, it was obtained that for a 1.25 times increase of the critical current for the BSCCO superconducting material compared with YBCO, the dimensions of the BSCCO torus were reduced by 7% considering the same stored energy. Also, following a numerical parametric analysis, it resulted that, in order to maximize the amount of energy stored, the thickness of the torus modules must be as small as possible, without exceeding the critical current. Another numerical analysis showed that the energy stored is maximum when the major radius of the torus is minimum, i.e., for a torus as compact as possible.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Luo, Ying Hong, und Jing Jing Wang. „Finite Element Analysis of the Magnetic Field Simulation of High Temperature Superconducting Magnet“. Applied Mechanics and Materials 672-674 (Oktober 2014): 562–66. http://dx.doi.org/10.4028/www.scientific.net/amm.672-674.562.

Der volle Inhalt der Quelle
Annotation:
Superconducting Magnetic Energy Storage (SMES) system use conductive coils made of superconductor wire to store energy, its application entirely depends on the design and development of superconducting magnet, as the magnetic storage element, during the operation of the superconducting magnet generates relatively strong magnetic field. In this paper, a 1MJ class single solenoidal SMES with Bi2223/Ag conductor is presented. On the basis of electromagnetic theory, subsequently infers mathematical model of magnetic field distribution by ANSYS finite element analysis software, modeling a two-dimensional electromagnetic analysis of 44 double pancakes to get the magnetic field distribution patterns. The results of the analysis provide a reference for the structural design, optimization of a superconducting magnet and shielding of stray magnetic field.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Nikitin, Victor V., Gennady E. Sereda, Eugene G. Sereda und Alexander G. Sereda. „Experimental studies of charge of non-superconductive magnetic energy storage“. Transportation systems and technology 2, Nr. 1 (15.12.2016): 126–35. http://dx.doi.org/10.17816/transsyst201621126-135.

Der volle Inhalt der Quelle
Annotation:
One of the urgent tasks of railway transport development connected with the problem of power saving according to “The strategic directions of scientific and technical development of OAO RZD for the period of up to 2015” is a wide use of power-intensive energy storages in the main technological processes of power consumption and energy generation. Owing to the progress in the field of manufacturing high temperature superconductors of the second generation, the use of superconducting magnetic energy storages (SMES) is the most promising. A feature of induction coils, which are inductive energy storage as receivers and sources, according to the laws of commutation is inability to change current quickly through induction. This makes difficult to connect superconducting magnet directly to energy sources and receivers of traditional performance. This means that SMES require special charging circuits. The most viable is to charge coil via intermediate capacitor (capacitance storage (CS)). In this case, coil charge will be on phased basis, taking character of pulse pump of energy. The advantages of this modification are that energy source released from handling large, slowly varying currents, resulting in possibility to flexibly adjust magnitude and duration of coil charge depending on the required charging mode. To verify that the scheme of charging inductive energy storage via intermediate capacitor non-superconductive magnetic energy storage which, unlike superconductive has a finite resistance, has been used. The authors confirmed working capacity of charging scheme for inductive energy storage via intermediate capacitor on phased basis. It is noted that maximum current value during charge of CS increases with capacitance value of the intermediate storage and with decreasing series included with CS inductance.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Hirabayashi, H., Y. Makida, S. Nomura und T. Shintomi. „Liquid Hydrogen Cooled Superconducting Magnet and Energy Storage“. IEEE Transactions on Applied Superconductivity 18, Nr. 2 (Juni 2008): 766–69. http://dx.doi.org/10.1109/tasc.2008.920541.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Korpela, Aki, Jorma Lehtonen und Risto Mikkonen. „Optimization of HTS superconducting magnetic energy storage magnet volume“. Superconductor Science and Technology 16, Nr. 8 (13.06.2003): 833–37. http://dx.doi.org/10.1088/0953-2048/16/8/301.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Liu, Liyuan, Wei Chen, Huimin Zhuang, Fei Chi, Gang Wang, Gexiang Zhang, Jing Jiang, Xinsheng Yang und Yong Zhao. „Mechanical Analysis and Testing of Conduction-Cooled Superconducting Magnet for Levitation Force Measurement Application“. Crystals 13, Nr. 7 (17.07.2023): 1117. http://dx.doi.org/10.3390/cryst13071117.

Der volle Inhalt der Quelle
Annotation:
High-temperature superconductors have great potential for various engineering applications such as a flywheel energy storage system. The levitation force of bulk YBCO superconductors can be drastically increased by increasing the strength of the external field. Therefore, a 6T conduction-cooled superconducting magnet has been developed for levitation force measurement application. Firstly, to protect the magnet from mechanical damage, reliable stress analysis inside the coil is paramount before the magnet is built and tested. Therefore, a 1/4 two-dimensional (2D) axisymmetric model of the magnet was established, and the mechanical stress in the whole process of winding, cooling down and energizing of the magnet was calculated. Then, the charging, discharging, and preliminary levitation force performance tests were performed to validate the operating stability of the magnet. According to the simulation results, the peak stresses of all coil models are within the allowable value and the winding maintains excellent mechanical stability in the superconducting magnet. The test results show that the superconducting magnet can be charged to its desired current of 150 A without quenching and maintain stable operation during the charging and discharging process. What is more, the superconducting magnet can meet the requirements for the levitation force measurement of both low magnetic field and high magnetic field.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Ma, An Ren, und Yong Jun Huang. „The Power Smoothing Control of PMSG Based on Superconducting Magnetic Energy Storage“. Advanced Materials Research 898 (Februar 2014): 493–96. http://dx.doi.org/10.4028/www.scientific.net/amr.898.493.

Der volle Inhalt der Quelle
Annotation:
In the traditional control of permanent-magnet synchronous generator (PMSG), when the speed of the wind changes quickly, the power and the voltage of the generator will vibrate. In this paper, superconducting magnetic energy system (SMES) is used to realize the smoothing control of power and voltage of generator. The feasibility and correctness of the control strategy are verified by MATLAB simulation.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Du, Hu, Gang Wu, Xiang Li, Ke Bi, Ji Ma und Hui Ling Wang. „Investigation on Numerical Calculation of Thermal Boundary Resistance between Superconducting Magnets“. Applied Mechanics and Materials 217-219 (November 2012): 2505–9. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2505.

Der volle Inhalt der Quelle
Annotation:
Aiming at the problem that thermal boundary resistance (TBR) has an effect on heat transportation of superconducting magnet when Superconducting Magnetic Energy Storage (SMES) is cooled directly, from perspective of numerical calculation, truncated cone, circular arc and triangular models are used to simulate the solid to solid contact surface, and finite element method is adopted to carry on numerical simulation calculation for thermal boundary resistance. With comparison and analysis of the calculation results of the three models, knowing that the value calculated with the triangular model when its control angle is 30° is close to the measured value and its relative error is 17%. Meanwhile, the error source is analyzed. This dissertation can be a good reference to the research on superconducting magnet heat transportation.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Taozhen Dai, Yuejin Tang, Jing Shi, Fengshun Jiao und Likui Wang. „Design of a 10 MJ HTS Superconducting Magnetic Energy Storage Magnet“. IEEE Transactions on Applied Superconductivity 20, Nr. 3 (Juni 2010): 1356–59. http://dx.doi.org/10.1109/tasc.2009.2039925.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Yamada, S., Y. Hishinuma und Y. Aso. „Multi-Functional Current Multiplier by High Temperature Superconducting Magnet Energy Storage“. Physics Procedia 36 (2012): 741–46. http://dx.doi.org/10.1016/j.phpro.2012.06.036.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Mehr Quellen

Dissertationen zum Thema "Superconducting magnet energy storage"

1

Varghese, Philip. „Magnet design considerations for superconductive magnetic energy storage“. Diss., This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-02052007-081238/.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Kumar, Prem. „Applications of superconducting magnetic energy storage systems in power systems“. Thesis, Virginia Tech, 1989. http://hdl.handle.net/10919/44118.

Der volle Inhalt der Quelle
Annotation:
A Superconducting Magnetic Energy Storage (SMES) system is a very efficient storage device capable of storing large amounts of energy. The primary applications it has been considered till now are load-leveling and system stabilization.This thesis explores new applications/benefits of SMES in power systems. Three areas have been identified. â ¢ Using SMES in conjunction with PV systems.SMES because of their excellent dynamic response and PV being an intermittent source complement one another.A scheme for this hybrid system is developed and simulation done accordingly. Using SMES in an Asynchronous link between Power Systems. SMES when used in a series configuration between two or more systems combines the benefits of asynchronous connection, interconnection and energy storage. A model of such a scheme has been developed and the control of such a scheme is demonstrated using the EMTP. The economic benefits of this scheme over pure power interchange, SMES operation alone and a battery/dc link is shown. Improvement of transmission through the use of SMES. SMES when used for diurnal load leveling provides additional benefits like reduced transmission losses, reduced peak loading and more effective utilization of transmission facility, the impact of size and location on these benefits were studied, and if used as an asynchronous link provides power flow control.
Master of Science
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Hawley, Christopher John. „Design and manufacture of a high temperature superconducting magnetic energy storage device“. Access electronically, 2005. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20060508.143200/index.html.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Yuan, Weijia. „Second-generation high-temperature superconducting coils and their applications for energy storage“. Thesis, University of Cambridge, 2010. https://www.repository.cam.ac.uk/handle/1810/229754.

Der volle Inhalt der Quelle
Annotation:
Since a superconductor has no resistance below a certain temperature and can therefore save a large amount of energy dissipated, it is a 'green' material by saving energy loss and hence reducing carbon emissions. Recently the massive manufacture of high-temperature superconducting (HTS) materials has enabled superconductivity to become a preferred candidate to help generation and transportation of cleaner energy. One of the most promising applications of superconductors is Superconducting Magnetic Energy Storage (SMES) systems, which are becoming the enabling engine for improving the capacity, efficiency, and reliability of the electric system. SMES systems store energy in the magnetic field created by the flow of direct current in a superconducting coil. SMES systems have many advantages compared to other energy storage systems: high cyclic efficiency, fast response time, deep discharge and recharge ability, and a good balance between power density and energy density. Based on these advantages, SMES systems will play an indispensable role in improving power qualities, integrating renewable energy sources and energizing transportation systems. This thesis describes an intensive study of superconducting pancake coils wound using second-generation(2G) HTS materials and their application in SMES systems. The specific contribution of this thesis includes an innovative design of the SMES system, an easily calculated, but theoretically advanced numerical model to analyse the system, extensive experiments to validate the design and model, and a complete demonstration experiment of the prototype SMES system. This thesis begins with literature review which includes the introduction of the background theory of superconductivity and development of SMES systems. Following the literature review is the theoretical work. A prototype SMES system design, which provides the maximum stored energy for a particular length of conductors, has been investigated. Furthermore, a new numerical model, which can predict all necessary operation parameters, including the critical current and AC losses of the system, is presented. This model has been extended to analyse superconducting coils in different situations as well. To validate the theoretical design and model, several superconducting coils, which are essential parts of the prototype SMES system, together with an experimental measurement set-up have been built. The coils have been energized to test their energy storage capability. The operation parameters including the critical current and AC losses have been measured. The results are consistent with the theoretical predictions. Finally the control system is developed and studied. A power electronics control circuit of the prototype SMES system has been designed and simulated. This control circuit can energize or discharge the SMES system dynamically and robustly. During a voltage sag compensation experiment, this SMES prototype monitored the power system and successfully compensated the voltage sag when required. By investigating the process of building a complete system from the initial design to the final experiment, the concept of a prototype SMES system using newly available 2G HTS tapes was validated. This prototype SMES system is the first step towards the implementation of future indsutrial SMES systems with bigger capacities, and the knowledge obtained through this research provides a comprehensive overview of the design of complete SMES systems.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Superczynski, Matthew J. „Analysis of the Power Conditioning System for a Superconducting Magnetic Energy Storage Unit“. Thesis, Virginia Tech, 2000. http://hdl.handle.net/10919/34860.

Der volle Inhalt der Quelle
Annotation:
Superconducting Magnetic Energy Storage (SMES) has branched out from its application origins of load leveling, in the early 1970s, to include power quality for utility, industrial, commercial and military applications. It has also shown promise as a power supply for pulsed loads such as electric guns and electromagnetic aircraft launchers (EMAL) as well as for vital loads when power distribution systems are temporarily down. These new applications demand more efficient and compact high performance power electronics. A 250 kW Power Conditioning System (PCS), consisting of a voltage source converter (VSC) and bi-directional two-quadrant DC/DC converter (chopper), was developed at the Center for Power Electronics Systems (CPES) under an ONR funded program. The project was to develop advanced power electronic techniques for SMES Naval applications. This thesis focuses on system analysis and development of a demonstration test plan to illustrate the SMES systems' ability to be multitasked for implementation on naval ships. The demonstration focuses on three applications; power quality, pulsed power and vital loads. An integrated system controller, based on an Altera programmable logic device, was developed to coordinate charge/discharge transitions. The system controller integrated the chopper and VSC controller, configured applicable loads, and dictated sequencing of events during mode transitions. Initial tests with a SMES coil resulted in problems during mode transitions. These problems caused uncontrollable transients and caused protection to trigger and processors to shut down. Accurate models of both the Chopper and VSC were developed and an analysis of these mode transition transients was conducted. Solutions were proposed, simulated and implemented in hardware. Successful operation of the system was achieved and verified with both a low temperature superconductor here at CPES and a high temperature superconductor at The Naval Research Lab.
Master of Science
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Yunus, A. M. Shiddiq. „Application of SMES Unit to improve the performance of doubly fed induction generator based WECS“. Thesis, Curtin University, 2012. http://hdl.handle.net/20.500.11937/1450.

Der volle Inhalt der Quelle
Annotation:
Due to the rising demand of energy over several decades, conventional energy resources have been continuously and drastically explored all around the world. As a result, global warming is inevitable due to the massive exhaust of CO2 into the atmosphere from the conventional energy sources. This global issue has become a high concern of industrial countries who are trying to reduce their emission production by increasing the utilization of renewable energies such as wind energy. Wind energy has become very attractive since the revolution of power electronics technology, which can be equipped with wind turbines. Wind energy can be optimally captured with wind turbine converters. However, these converters are very sensitive if connected with the grid as grid disturbances may have a catastrophic impact on the overall performance of the wind turbines.In this thesis, superconducting magnetic energy storage (SMES) is applied on wind energy conversion systems (WECSs) that are equipped with doubly fed induction generators (DFIGs) during the presence of voltage sags and swells in the grid side. Without SMES, certain levels of voltage sags and swells in the grid side may cause a critical operating condition that may require disconnection of WECS to the grid. This condition is mainly determined by the voltage profile at the point of common coupling (PCC), which is set up differently by concerned countries all over the world. This requirement is determined by the transmission system operator (TSO) in conjunction with the concerned government. The determined requirement is known as grid codes or fault ride through (FRT) capability.The selection of a SMES unit in this thesis is based on its advantages over other energy storage technologies. Compared to other energy storage options, the SMES unit is ranked first in terms of highest efficiency, which is 90-99%. The high efficiency of the SMES unit is achieved by its low power loss because electric currents in the coil encounter almost no resistance and there are no moving parts, which means no friction losses. Meanwhile, DFIG is selected because it is the most popular installed WECS over the world. In 2004 about 55% of the total installed WECS worldwide were equipped with DFIG. There are two main strategies that can be applied to meet the grid requirements of a particular TSO. The first strategy is development of new control techniques to fulfil the criterion of the TSOs. This strategy, however, is applicable only to the new WECS that have not been connected to the power grid. If new control techniques are applied to the existing gridconnected WECSs, they will not be cost effective because the obsolete design must be dismantled and re-installed to comply with current grid code requirements. The second strategy is the utilization of flexible AC transmission system (FACTS) devices or storage energy devices to meet the grid code requirements. This strategy seems more appropriate for implementation in the existing WECS-grid connection in order to comply with the current grid code requirements. By appropriate design, the devices might be more cost effective compared to the first strategy, particularly for the large wind farms that are already connected to the grid.A new control algorithm of a SMES unit, which is simple but still involves all the important parameters, is employed in this study. Using the hysteresis current control approach in conjunction with a fuzzy logic controller, the SMES unit successfully and effectively improves the performance of the DFIG during voltage sag and swell events in the grid side; thus, this will prevent the WECS equipped with DFIG from being disconnected from the grid according to the selected fault ride through used in this study. The dynamic study of DFIG with SMES during short load variation is carried out as an additional advantage of SMES application on a DFIG system. In this study, the proposed SMES unit is controlled to compensate the reduced transfer power of DFIG during the short load variation event. Moreover, the SMES unit is also engaged in absorbing/storing some amount of excessive power that might be transferred to the grid when the local loads are suddenly decreased. Finally, the studies of intermittent misfires and fire-through that take place within the converters of DFIG are carried out in order to investigate the impact of these converter faults on the performance of DFIG. In this part, the proposed SMES unit is controlled to effectively improve the DFIG’s performance in order to prevent it from being disconnected or shut down from the power grid during the occurrence of these intermittent switching faults.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Arsoy, Aysen. „Electromagnetic Transient and Dynamic Modeling and Simulation of a StatCom-SMES Compensator in Power Systems“. Diss., Virginia Tech, 2000. http://hdl.handle.net/10919/27225.

Der volle Inhalt der Quelle
Annotation:
Electromagnetic transient and dynamic modeling and simulation studies are presented for a StatCom-SMES compensator in power systems. The transient study aims to better understand the transient process and interaction between a high power/high voltage SMES coil and its power electronics interface, dc-dc chopper. The chopper is used to attach the SMES coil to a StatCom. Following the transient study, the integration of a StatCom with SMES was explored to demonstrate the effectiveness of the combined compensator in damping power oscillations. The transient simulation package PSCAD/EMTDC has been used to perform the integrated modeling and simulation studies. A state of the art review of SMES technology was conducted. Its applications in power systems were discussed chronologically. The cost effective and feasible applications of this technology were identified. Incorporation of a SMES coil into an existing StatCom controller is one of the feasible applications, which can provide improved StatCom operation, and therefore much more flexible and controllable power system operation. The SMES coil with the following unique design characteristics of 50MW (96 MW peak), 100 MJ, 24 kV interface has been used in this study. As a consequence of the high power/ high voltage interface, special care needs to be taken with overvoltages that can stress the insulation of the coil. This requires an investigation of transient overvoltages through a detailed modeling of SMES and its power electronics interface. The electrical model for the SMES coil was developed based on geometrical dimensions of the coil. The interaction between the SMES coil and its power electronics interface (dc-dc chopper for the integration to StatCom) was modeled and simulated to identify transient overvoltages. Transient suppression schemes were developed to reduce these overvoltages. Among these are MOV implementation, surge capacitors, different configurations of the dc-dc chopper. The integration of the SMES coil to a StatCom controller was developed, and its dynamic behavior in damping oscillations following a three-phase fault was investigated through a number of simulation case studies. The results showed that the addition of energy storage to a StatCom controller can improve the StatCom-alone operation and can possibly reduce the MVA rating requirement for the StatCom operating alone. The effective location selection of a StatCom-SMES controller in a generic power system is also discussed.
Ph. D.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Nielsen, Knut Erik. „Superconducting magnetic energy storage in power systems with renewable energy sources“. Thesis, Norwegian University of Science and Technology, Department of Electrical Power Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-10817.

Der volle Inhalt der Quelle
Annotation:

The increasing focus on large scale integration of new renewable energy sources like wind power and wave power introduces the need for energy storage. Superconducting Magnetic Energy Storage (SMES) is a promising alternative for active power compensation. Having high efficiency, very fast response time and high power capability it is ideal for levelling fast fluctuations. This thesis investigates the feasibility of a current source converter as a power conditioning system for SMES applications. The current source converter is compared with the voltage source converter solution from the project thesis. A control system is developed for the converter. The modulation technique is also investigated. The SMES is connected in shunt with an induction generator, and is facing a stiff network. The objective of the SMES is to compensate for power fluctuations from the induction generator due to variations in wind speed. The converter is controlled by a PI-regulator and a current compensation technique deduced from abc-theory. Simulations on the system are carried out using the software PSIM. The simulations have proved that the SMES works as both an active and reactive power compensator and smoothes power delivery to the grid. The converter does however not seem like an optimum solution at the moment. High harmonic distortion of the output currents is the main reason for this. However this system might be interesting for low power applications like wave power. I

APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Li, Jianwei. „Design and assessment of the superconducting magnetic energy storage and the battery hybrid energy storage system“. Thesis, University of Bath, 2017. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.760945.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Ho, Tracey 1976. „High-speed permanent magnet motor generator for flywheel energy storage“. Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80068.

Der volle Inhalt der Quelle
Annotation:
Thesis (S.B. and M.Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1999.
Includes bibliographical references (p. 139).
by Tracey Chui Ping Ho.
S.B.and M.Eng.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Mehr Quellen

Bücher zum Thema "Superconducting magnet energy storage"

1

Ehsani, Mehrdad. Converter circuits for superconductive magnetic energy storage. College Station: Published for the Texas Engineering Experiment Station by Texas A&M University Press, 1988.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Yeshurun, Yosef. Agirat energyah bi-selilim molikhe-ʻal be-ṭemperaṭurot gevohot: Duaḥ shenati, 1995. Medinat Yiśraʼel: Miśrad ha-energyah ṿeha-tashtit, Agaf meḥḳar u-fituaḥ, 1996.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Yeshurun, Yosef. Agirat energyah bi-selilim molikhe ʻal be-ṭemperaṭurot gevohot: Duaḥ sofi shel shenat ha-meḥḳar ha-rishonah. Medinat Yiśraʼel: Miśrad ha-energyah ṿeha-tashtit, Agaf meḥḳar u-fituaḥ, 1995.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Ossi, Kauppinen, Hrsg. Investigation of superconducting pulse magnets for energy storage: Final report. Tampere: Tampere University of Technology, Lab. of Electricity and Magnetism, 1987.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Wallace, Alan K. Testing and evaluation of the MagnaForce adjustable coupling. Portland, Or: Technology Development Team, Bonneville Power Administration, 1995.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

American Society of Mechanical Engineers. Winter Meeting. Heat transfer and superconducting magnetic energy storage: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York: The Society, 1992.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Molina-Ibáñez, Enrique-Luis, Antonio Colmenar-Santos und Enrique Rosales-Asensio. Superconducting Magnetic Energy Storage Systems (SMES) for Distributed Supply Networks. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34773-3.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Yuan, Weijia. Second-Generation High-Temperature Superconducting Coils and Their Applications for Energy Storage. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-742-6.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

service), SpringerLink (Online, Hrsg. Second-Generation High-Temperature Superconducting Coils and Their Applications for Energy Storage. London: Springer-Verlag London Limited, 2011.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

United States. Dept. of Energy. Basic Energy Sciences Advisory Committee. Panel on High-Tc Superconducting Magnet Applications in Particle Physics. Report of the Basic Energy Sciences Advisory Committee, Panel on High-Tc Superconducting Magnet Applications in Particle Physics. Washington, D.C: U.S. Dept. of Energy, Office of Energy Research, 1987.

Den vollen Inhalt der Quelle finden
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Mehr Quellen

Buchteile zum Thema "Superconducting magnet energy storage"

1

Tominaga, T., O. Takashiba, H. Fujita und K. Asano. „Design and Tests of the Superconducting Magnet for Energy Storage“. In 11th International Conference on Magnet Technology (MT-11), 408–12. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0769-0_70.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Mitani, Y., und Y. Murakami. „A Method for the High Energy Density SMES—Superconducting Magnetic Energy Storage“. In 11th International Conference on Magnet Technology (MT-11), 378–83. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0769-0_65.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Wang, Yu. „Structural Design of Superconducting Energy Storage Solenoidal Magnets“. In Advances in Cryogenic Engineering, 1093–102. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4757-9047-4_136.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Anand, Ankit, Abhay Singh Gour, Tripti Sekhar Datta und Vutukuru Vasudeva Rao. „Stress Calculation of 50 kJ High Temperature Superconducting Magnet Energy Storage Using FEM“. In Proceedings of the 28th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2022, 1133–39. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-6128-3_147.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Riouch, Tariq, und Abdelilah Byou. „Application of Superconducting Magnet Energy Storage to Improve DFIG Behavior Under Sag Voltage“. In Digital Technologies and Applications, 707–14. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-29860-8_71.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Abu-Siada, Ahmed, Mohammad A. S. Masoum, Yasser Alharbi, Farhad Shahnia und A. M. Shiddiq Yunus. „Superconducting Magnetic Energy Storage, a Promising FACTS Device for Wind Energy Conversion Systems“. In Recent Advances in Renewable Energy, 49–86. UAE: Bentham Science Publishers Ltd., 2017. http://dx.doi.org/10.2174/9781681085425117020004.

Der volle Inhalt der Quelle
Annotation:
The applications of FACTS devices have become popular in the last few decades. There are many types of FACTS devices that are currently used in power systems to improve system stability, power quality and the overall reliability of the power systems. Since the involvement of renewable energies based power plants such as wind and PV, problems related to power system stability and quality has become even more complex, therefore the deployment of FACTS devices has become a challenging task. In this chapter, a Superconducting Magnetic Energy Storage (SMES) Unit is applied to improve the performance of Doubly Fed Induction Generator (DFIG) based wind turbine during various disturbances such as voltage sag, short circuit faults and load variation, including problems related to internal faults within the DFIG converters.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Molina-Ibáñez, Enrique-Luis, Antonio Colmenar-Santos und Enrique Rosales-Asensio. „Analysis on the Electric Vehicle with a Hybrid Storage System and the Use of Superconducting Magnetic Energy Storage (SMES)“. In Superconducting Magnetic Energy Storage Systems (SMES) for Distributed Supply Networks, 97–125. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34773-3_4.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Molina-Ibáñez, Enrique-Luis, Antonio Colmenar-Santos und Enrique Rosales-Asensio. „Legislative and Economic Aspects for the Inclusion of Energy Reserve by a Superconducting Magnetic Energy Storage: Application to the Case of the Spanish Electrical System“. In Superconducting Magnetic Energy Storage Systems (SMES) for Distributed Supply Networks, 25–68. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34773-3_2.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Molina-Ibáñez, Enrique-Luis, Antonio Colmenar-Santos und Enrique Rosales-Asensio. „Technical Approach for the Inclusion of Superconducting Magnetic Energy Storage in a Smart City“. In Superconducting Magnetic Energy Storage Systems (SMES) for Distributed Supply Networks, 69–96. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34773-3_3.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Molina-Ibáñez, Enrique-Luis, Antonio Colmenar-Santos und Enrique Rosales-Asensio. „Introduction“. In Superconducting Magnetic Energy Storage Systems (SMES) for Distributed Supply Networks, 1–24. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-34773-3_1.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Konferenzberichte zum Thema "Superconducting magnet energy storage"

1

Lu, Yan, Li-Zhong Liu, Shi-lin Zheng und Yun-long Huang. „Quench detection of superconducting magnetic energy storage hybrid magnet“. In 2012 IEEE International Conference on Computer Science and Automation Engineering (CSAE). IEEE, 2012. http://dx.doi.org/10.1109/csae.2012.6272818.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Coombs, T. A. „Bearings and energy storage“. In IEE Colloquium on High Tc Superconducting Materials as `Magnets'. IEE, 1995. http://dx.doi.org/10.1049/ic:19951525.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Rao, V. Vasudeva, Shyamalendu M. Bose, S. N. Behera und B. K. Roul. „Superconducting Magnetic Energy Storage and Applications“. In MESOSCOPIC, NANOSCOPIC AND MACROSCOPIC MATERIALS: Proceedings of the International Workshop on Mesoscopic, Nanoscopic and Macroscopic Materials (IWMNMM-2008). AIP, 2008. http://dx.doi.org/10.1063/1.3027184.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Lin, Peiran, Yuming Su, Jingxin Xi und Bocheng Zhou. „The Investigation of Superconducting Magnetic Energy Storage“. In 2021 3rd International Academic Exchange Conference on Science and Technology Innovation (IAECST). IEEE, 2021. http://dx.doi.org/10.1109/iaecst54258.2021.9695555.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Chang-wook Kim, Wan-soo Nah und Il-han Park. „Design optimization of superconducting magnet for maximum energy storage with critical surface constraints“. In IEEE International Magnetics Conference. IEEE, 1999. http://dx.doi.org/10.1109/intmag.1999.837663.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Shen, Boyang, Yu Chen, Lin Fu, Junqi Xu, Xiaohong Chen und Mingshun Zhang. „Superconducting Magnetic Energy Storage (SMES) for Railway System“. In 2023 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD). IEEE, 2023. http://dx.doi.org/10.1109/asemd59061.2023.10369041.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Glowacki, Jakub, Max Goddard-Winchester, Rodney Badcock und Nicholas Long. „Superconducting Magnetic Energy Storage for a Pulsed Plasma Thruster“. In AIAA Propulsion and Energy 2020 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2020. http://dx.doi.org/10.2514/6.2020-3635.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Pullano, Salvatore A., Antonino S. Fiorillo, Antonio Morandi und Pier Luigi Ribani. „Development of an innovative superconducting magnetic energy storage system“. In 2015 AEIT International Annual Conference (AEIT). IEEE, 2015. http://dx.doi.org/10.1109/aeit.2015.7415280.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Sutanto, D., und K. W. E. Cheng. „Superconducting magnetic energy storage systems for power system applications“. In 2009 International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD). IEEE, 2009. http://dx.doi.org/10.1109/asemd.2009.5306614.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Dan Wang, Zhen-hui Wu, Gang Xu, Da-da Wang, Meng Song und Xiao-tao Peng. „Real-time power control of superconducting magnetic energy storage“. In 2012 IEEE International Conference on Power System Technology (POWERCON 2012). IEEE, 2012. http://dx.doi.org/10.1109/powercon.2012.6401307.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen

Berichte der Organisationen zum Thema "Superconducting magnet energy storage"

1

Li, Qiang, und Michael Furey. Development of ultra-high field superconducting magnetic energy storage (SMES) for use in the ARPA-E project titled “Superconducting Magnet Energy Storage System with Direct Power Electronics Interface”. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1209920.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Akhil, A. A., P. Butler und T. C. Bickel. Battery energy storage and superconducting magnetic energy storage for utility applications: A qualitative analysis. Office of Scientific and Technical Information (OSTI), November 1993. http://dx.doi.org/10.2172/10115548.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Dresner, L. Survey of domestic research on superconducting magnetic energy storage. Office of Scientific and Technical Information (OSTI), September 1991. http://dx.doi.org/10.2172/6085603.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Schwartz, J., E. E. Burkhardt und William R. Taylor. Preliminary Investigation of Small Scale Superconducting Magnetic Energy Storage (SMES) Systems. Fort Belvoir, VA: Defense Technical Information Center, Januar 1996. http://dx.doi.org/10.21236/ada304985.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Butler, Paul, Phil DiPietro, Laura Johnson, Joseph Philip, Kim Reichart und Paula Taylor. A Summary of the State of the Art of Superconducting Magnetic Energy Storage Systems, Flywheel Energy Storage Systems, and Compressed Air Energy Storage Systems. Office of Scientific and Technical Information (OSTI), Juli 1999. http://dx.doi.org/10.2172/9724.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Rogers, J. D. Superconducting magnetic energy storage (SMES) program. Progress report, January 1-December 31, 1984. Office of Scientific and Technical Information (OSTI), Mai 1985. http://dx.doi.org/10.2172/5533723.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

CHARLES M. WEBER. COMMERCIALIZATION DEMONSTRATION OF MID-SIZED SUPERCONDUCTING MAGNETIC ENERGY STORAGE TECHNOLOGY FOR ELECTRIC UTILITYAPPLICATIONS. Office of Scientific and Technical Information (OSTI), Juni 2008. http://dx.doi.org/10.2172/932779.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

DEFENSE NUCLEAR AGENCY WASHINGTON DC. Superconducting Magnetic Energy Storage (SMES-ETM) System. Environmental Impact Assessment Process Implementation Plan. Fort Belvoir, VA: Defense Technical Information Center, November 1989. http://dx.doi.org/10.21236/ada338872.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Morris, Tony, und Jordan Morris. Integration of Superconducting Magnetic Energy Storage (SMES) Systems Optimized with Second-Generation, High-Temperature Superconducting (2G-HTS) Technology with a Major Fossil-Fueled Asset. Office of Scientific and Technical Information (OSTI), März 2022. http://dx.doi.org/10.2172/1854334.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Giese, R. F. Superconducting energy storage. Office of Scientific and Technical Information (OSTI), Oktober 1993. http://dx.doi.org/10.2172/10192360.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Die Auswahlen zum Thema "Superconducting magnet energy storage" für konkrete Quellenarten können Sie auch interessieren:
Zeitschriftenartikel Dissertationen Bücher
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie