Zeitschriftenartikel: „Software installation“

1

Barrera, David, und Paul Van Oorschot. „Secure Software Installation on Smartphones“. IEEE Security & Privacy Magazine 9, Nr. 3 (Mai 2011): 42–48. http://dx.doi.org/10.1109/msp.2010.202.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Undrus, Alexander. „ATLAS Software Installation on Supercomputers“. EPJ Web of Conferences 214 (2019): 03040. http://dx.doi.org/10.1051/epjconf/201921403040.

Der volle Inhalt der Quelle

Annotation:

PowerPC and high-performance computers (HPC) are important resources for computing in the ATLAS experiment. The future LHC data processing will require more resources than Grid computing, currently using approximately 100,000 cores at well over 100 sites, can provide. Supercomputers are extremely powerful as they utilize hundreds of thousands of CPUs joined together. However, their architectures have different instruction sets. ATLAS binary software distributions for x86 chipsets do not fit these architectures, as emulation of these chipsets results in huge performance loss. This paper describes the methodology of ATLAS software installation from source code on supercomputers. The installation procedure includes downloading the ATLAS simulation release code with 0.7 million C++ and Python lines as well as the source code of more than 50 external packages, such as ROOT and Geant4, followed by compilation, and rigorous unit and integration testing. The presentation reports the application of this procedure at Titan HPC and Summit PowerPC at Oak Ridge Computing Facility (OLCF).

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Dremin, R. S., Yu S. Bets, V. S. Tynchenko, V. V. Bukhtoyarov, A. V. Milov, D. V. Egorova und V. V. Kukartsev. „Remote monitoring software for induction soldering installation“. IOP Conference Series: Materials Science and Engineering 734 (29.01.2020): 012134. http://dx.doi.org/10.1088/1757-899x/734/1/012134.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Trifonova, Anna, Letizia Jaccheri und Kristin Bergaust. „Software engineering issues in interactive installation art“. International Journal of Arts and Technology 1, Nr. 1 (2008): 43. http://dx.doi.org/10.1504/ijart.2008.019882.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Yang, Dong, Yongbin Li, Tiejun Li, Tian Zhang, Ming Han und Han Yan. „The system design of external cladding installation robot“. International Journal of Advanced Robotic Systems 17, Nr. 6 (01.11.2020): 172988142096906. http://dx.doi.org/10.1177/1729881420969062.

Der volle Inhalt der Quelle

Annotation:

In the installation process of large-scale external cladding, the labor intensity is high, and it is dangerous and hard to guarantee good construction quality. In view of these issues, this study designs a construction robot for external cladding installation, as a better solution. First, the advantages and disadvantages of the current building external cladding hanging process are discussed. The components, suitable for automatic installation, are selected to develop an automatic installation process for the building external cladding. According to the process steps and installation action flow, the installation robot is first adjusted. After the design of a step-by-step workflow of positioning and installation, a robot with a six-degree-of-freedom string-mixing mechanism is designed. Finally, a prototype of the proposed external cladding installation robot is developed, and the system is experimentally verified under simulation conditions and real operation. The test results show that the external cladding installation robot system has a strong theoretical basis. The series-parallel hybrid six-degree-of-freedom structure is reasonable, design wise. It helps to complete the automatic installation of the building external cladding and improve the automation level of large-scale plate installations.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Ghose, Dipanjan, Sreejita Naskar, Shabbiruddin und Amit Kumar Roy. „An Open Source Software“. International Journal of Open Source Software and Processes 10, Nr. 1 (Januar 2019): 49–68. http://dx.doi.org/10.4018/ijossp.2019010104.

Der volle Inhalt der Quelle

Annotation:

Most of the issues regarding power supply occurs due to transmission of power through long distances over diverse and unsuitable landscapes. A solar power plant, if installed within the vicinity of the diverse recipient areas, cuts short the transmission related problems by great numbers and acts like an absolute boon to hilly terrains like Sikkim. The study presented here investigates the land suitability for medium-scale solar power installations in Sikkim by using open source software - Quantum-Geographic Information System (Q-GIS) combined with Multi-criteria Decision Making (MCDM) techniques. Six exclusion criteria are identified to avoid unsuitable areas for plant installation. Analytic Hierarchy Process (AHP) is used to rank the available areas according to their suitability, which have been further presented in a technology-aided suitability map. Such a study greatly reduces the feasibility related issues for investors in such projects to visit every site available for construction of the plant, saving time and money.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Salvo, A. D., A. Barchiesi, K. Gnanvo, C. Gwilliam, J. Kennedy, G. Krobath, A. Olszewski und G. Rybkine. „The ATLAS software installation system for LCG/EGEE“. Journal of Physics: Conference Series 119, Nr. 5 (01.07.2008): 052013. http://dx.doi.org/10.1088/1742-6596/119/5/052013.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Naresh, E., und B. P. Vijaya Kumar. „Effective Software Installation for Embedded Software by Applying the Reverse Engineering Approach“. Indian Journal of Science and Technology 10, Nr. 34 (19.10.2017): 1–6. http://dx.doi.org/10.17485/ijst/2017/v10i34/115507.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Kuttybay, N. B., A. K. Saymbetov, Z. Sh Tenizbayeva, L. B. Smail und R. M. Yerbolat. „DEVELOPMENT OF AN AUTOMATED PHOTOVOLTAIC SYSTEM WITH WIRELESS MONITORING“. PHYSICO-MATHEMATICAL SERIES 335, Nr. 1 (10.02.2021): 90–96. http://dx.doi.org/10.32014/2021.2224-5294.13.

Der volle Inhalt der Quelle

Annotation:

The work is devoted to the development of an efficient photovoltaic installation with automated wireless monitoring based on the LabView software. Long-distance communication technology - LoRa was used to wirelessly transmit data on the output characteristic states of the photovoltaic installation, storage battery and built-in sensors. This module operates at 433 MHz and transmits small data packets with low power consumption. This makes the stand-alone system energy efficient compared to similar wireless installations. The graphical software LabView was chosen to monitor the state of the developed system. The paper shows a block diagram of an automated wireless system, an operational algorithm of the external transmitting part of the installation, as well as electrical circuits of the transmitting and receiving control units. As a result of the work, a photovoltaic system with an automated wireless monitoring system and graphical data display was developed. The developed automated complex is more efficient and easy to use in comparison with other systems.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Kuttybay, N. B., A. K. Saymbetov, Z. Sh Tenizbayeva, L. B. Smail und R. M. Yerbolat. „DEVELOPMENT OF AN AUTOMATED PHOTOVOLTAIC SYSTEM WITH WIRELESS MONITORING“. PHYSICO-MATHEMATICAL SERIES 335, Nr. 1 (08.02.2021): 90–96. http://dx.doi.org/10.32014/2021.2518-1726.13.

Der volle Inhalt der Quelle

Annotation:

The work is devoted to the development of an efficient photovoltaic installation with automated wireless monitoring based on the LabView software. Long-distance communication technology - LoRa was used to wirelessly transmit data on the output characteristic states of the photovoltaic installation, storage battery and built-in sensors. This module operates at 433 MHz and transmits small data packets with low power consumption. This makes the stand-alone system energy efficient compared to similar wireless installations. The graphical software LabView was chosen to monitor the state of the developed system. The paper shows a block diagram of an automated wireless system, an operational algorithm of the external transmitting part of the installation, as well as electrical circuits of the transmitting and receiving control units. As a result of the work, a photovoltaic system with an automated wireless monitoring system and graphical data display was developed. The developed automated complex is more efficient and easy to use in comparison with other systems.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Farber, Claudia G. „Software Installation in a Distributed Computing Environment: Human Factors Issues and Methods“. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 37, Nr. 4 (Oktober 1993): 277–81. http://dx.doi.org/10.1177/154193129303700405.

Der volle Inhalt der Quelle

Annotation:

This paper explores the application of human factors methods to the design and documentation of software installation processes and procedures. The study analyzes the installation of a telecommunications operations support system in a workstation-based, distributed computing environment. The long-range goal of the endeavor is to produce usability objectives and guidelines that project teams can use in the development of software installation related procedures and user interfaces. The areas being studied include software installation planning, documentation, training, procedures, and customer support. Methods used include the development of user profiles, interviews with the system administrators, and field observations. Whereas the actual installation of the software proved to be relatively easy, the planning and pre-installation phases proved to be very complex and time-consuming. We explore some of the reasons for this and identify areas that need to be considered when developing software deployment plans and user interfaces.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Sanni*, Rachana R., und H. S. Guruprasad. „Hospital Management using OAM [Operation Administration & Maintenance] Tool“. International Journal of Innovative Technology and Exploring Engineering 10, Nr. 10 (30.08.2021): 24–30. http://dx.doi.org/10.35940/ijitee.j9391.08101021.

Der volle Inhalt der Quelle

Annotation:

This paper proposes a software tool to monitor the system configuration for Hospital Management System. The OAM tool monitors the system configurations after the user installs it into the system. The aim of this software is to monitor the system about its configurations and install the required softwares to the respective system. There are four tools in this application, Fintal, Piston, Naavi and Mapel. To install these, a technique of single file installation using batch scripting is used. Batch scripting is used to execute the installation files of softwares and the softwares are installed. These installation files of softwares will be embedded as execution commands in a single file called “windows batch file”, which should be saved with the extension as “.bat”. The installation that starts will be displayed in the command prompt to know whether the softwares are getting installed correctly. After each installation, the configuration and initialization of installed softwares will be displayed. The required softwares are to be installed. Each of these performs particular tasks that are required for the management of Hospitals. Fintal is used for overall management of Hospital. This is the most user-friendly part of OAM Tool. This handles overall administrative part of Hospitals. Piston is used for storing patient’s details. This stores the patients’ reports in detailed manner of each test the patient has undergone. Naavi is used for storing Laboratory details. The tests of each patient are stored here. And the last one, i.e., Mapel which is used for storing pharmaceuticals details (Medicines). It stores the details of medicines such as from which pharmaceuticals the medicines are purchased. The license of the hospital is also stored in this part of OAM Tool. All these together form an OAM Tool. This tool also manages other required softwares like, MySQL, ODBC drivers, etc. The management of Hospitals is very important as there is a need to maintain the patient details. This technique of installation is proposed in this paper to make the installation from hardware to remote installation such as, giving the access to the system in which the tool needs to be installed and to save the time of installation process.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

González-Peña, David, Ignacio García-Ruiz, Montserrat Díez-Mediavilla, Mª Isabel Dieste-Velasco und Cristina Alonso-Tristán. „Photovoltaic Prediction Software: Evaluation with Real Data from Northern Spain“. Applied Sciences 11, Nr. 11 (29.05.2021): 5025. http://dx.doi.org/10.3390/app11115025.

Der volle Inhalt der Quelle

Annotation:

Prediction of energy production is crucial for the design and installation of PV plants. In this study, five free and commercial software tools to predict photovoltaic energy production are evaluated: RETScreen, Solar Advisor Model (SAM), PVGIS, PVSyst, and PV*SOL. The evaluation involves a comparison of monthly and annually predicted data on energy supplied to the national grid with real field data collected from three real PV plants. All the systems, located in Castile and Leon (Spain), have three different tilting systems: fixed mounting, horizontal-axis tracking, and dual-axis tracking. The last 12 years of operating data, from 2008 to 2020, are used in the evaluation. Although the commercial software tools were easier to use and their installations could be described in detail, their results were not appreciably superior. In annual global terms, the results hid poor estimations throughout the year, where overestimations were compensated by underestimated results. This fact was reflected in the monthly results: the software yielded overestimates during the colder months, while the models showed better estimates during the warmer months. In most studies, the deviation was below 10% when the annual results were analyzed. The accuracy of the software was also reduced when the complexity of the dual-axis solar tracking systems replaced the fixed installation.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Welsby, Chris. „Technology, Nature, Software and Networks: Materializing the Post-Romantic Landscape“. Leonardo 44, Nr. 2 (April 2011): 101–6. http://dx.doi.org/10.1162/leon_a_00113.

Der volle Inhalt der Quelle

Annotation:

The author began making films and installations in the early 1970s. Although he has worked across a range of media, he has always concentrated on one particular theme that he conceptualizes as a two-sided question: How do we see ourselves in relation to the natural world, and how should we position our selves and our technologies within it? This essay traces some of the threads of these seminal ideas through a selection of works made in the years between 1974 and 2009. The author concludes with a detailed description of Tree Studies, a large-scale new media installation powered by real-time data from weather stations around the planet.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Wahyu Pramon, Eko, Karnoto Karnoto und Titik Nurhayati. „EVALUASI INSTALASI LISTRIK PADA GEDUNG MULTI CENTRE OF EXCELLENT (MCE) RUMAH SAKIT ISLAM SULTAN AGUNG SEMARANG“. eLEKTRIKA 9, Nr. 1 (04.12.2018): 17. http://dx.doi.org/10.26623/elektrika.v9i1.1110.

Der volle Inhalt der Quelle

Annotation:

<p> MCE Building Sultan Agung Islamic Hospital Semarang is a public facility that requires an electrical installation system that is in accordance with PUIL 2000. The purpose of evaluating electrical installations at the Multi Center of Excellent (MCE) building in Sultan Agung Semarang Islamic Hospital is to find out electrical installations in accordance with PUIL 2000 Evaluation of electrical installations includes calculation of MCB security and calculation of cable size. Calculation using manual calculation method and calculation using Ecodial Calculation 4.7 software. The calculation results are then compared to the installed units. From the results of the comparison it can be seen whether the electrical installation is in accordance with PUIL 2000. The results of the analysis can be concluded that the electrical installation system in the MCE building of Sultan Agung Semarang Islamic Hospital is in good condition and safe. In MCB installed units, they are in accordance with the PUIL 2000 standard. In the cable sizes installed several are in a condition not in accordance with the PUIL 2000 standard so cable replacement is required. For example, on the 1st floor divider panel SDP cable where the installed cable is 4x35 mm2, it is replaced by 4x95 mm2.</p><p>Keywords: Evaluation of Electrical Installation, PUIL 2000, Ecodial Advance Calculation 4</p>

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Saraswat, Satya Prakash, und John T. Gorgone. „Organizational learning curve in software installation: An empirical investigation“. Information & Management 19, Nr. 1 (August 1990): 53–59. http://dx.doi.org/10.1016/0378-7206(90)90014-9.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Johnson, Chris. „Managing an ethernet installation“. ACM SIGCOMM Computer Communication Review 20, Nr. 5 (Oktober 1990): 8–11. http://dx.doi.org/10.1145/381906.381913.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Dwi Cahyono, Bagus, und Dahliya Sulastri. „Development Of Electrical Installation Learning Me-dia With Delphi Language“. International Journal of Engineering, Science and Information Technology 1, Nr. 3 (02.07.2021): 23–27. http://dx.doi.org/10.52088/ijesty.v1i3.81.

Der volle Inhalt der Quelle

Annotation:

Learning Media is a learning tool that is used by someone by using tools that are made to facilitate the delivery of material when teaching at school. Things like that really help teachers in teaching in schools and are a solution to make students happy when learning and not feel bored. One of the learning materials in Vocational High Schools is electrical installation material. Introducing electrical installation material will be very difficult if only with books. Therefore this study aims to adopt material about electrical installations in a computer system. This system is called the Electrical Installation Learning Media in Delphi Language. This system is used to determine the number of light points on an electrical installation from the room size indicator and the amount of lux to be achieved. In addition, the system provides a brief description of the electrical installation material. In this system the electrical installation input data is entered into the computer manually. In building this system, Delphi 7 and Inno Set Up Compiler software are used as installers. The method used in this research is Research and Development (R&D), with the following stages: (1) preliminary research; (2) designing software; (3) collection of materials; (4) initial product development; (5) validation of instructional media experts; (6) product analysis and revision; (8) testing the media in learning; and (9) the final product of the instructional media. The results show that: (1) the results of the feasibility test according to electrical installation experts are that this system is suitable to be used as a learning medium in electrical installation subjects in vocational schools because it contains an explanation of the calculation method of an electrical installation in detail; (2) the results of the feasibility test according to media experts are that this system has very attractive visuals, is user friendly, is compatible with Windows and Linux and the media size is not too large; and (3) the results of the experiment using an indication of the size of the room and the amount of lux to be achieved, obtained data on the number of lamps according to the calculation using the formula.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Gursoy, Mustafa Eyyup, Burak Dindar und Omer Gul. „A Novel Strategy For Transformation Of Conventional Road Lighting To Smart Road Lighting“. Light & Engineering, Nr. 05-2020 (Oktober 2020): 97–105. http://dx.doi.org/10.33383/2019-107.

Der volle Inhalt der Quelle

Annotation:

In recent years, smart road lighting (SRL) design and application researches has been increasing rapidly. However, SRL applications remain pilotproject and cannot become widespread sufficiently. Main reason for this is that, although the cost of production of LED luminaires is reduced, when existing road lighting systems are transformed to LED road lighting, existing electrical installations and lighting poles cannot be used. Increased investment costs due to electrical installation and poles renovation, decrease interest in SRL transformation. In this study, an innovative solution is developed to decrease the costs of the SRL. First, a new LED luminaire is designed, which can work without changing the installations and poles of the existing projects. Then a test road is created using DIALux software, and the newly designed lighting installation is compared with completely redesigned one and conventional road lighting. Thus, contributions are provided for spreading of the SRL transformation, using low cost SRL approach.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Eck, Jerome E. „Software for Raceway Design and Calculation of Cable Installation Forces“. IEEE Transactions on Power Delivery 2, Nr. 2 (1987): 303–7. http://dx.doi.org/10.1109/tpwrd.1987.4308108.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Eck, Jerome E. „Software for Raceway Design and Calculation of Cable Installation Forces“. IEEE Power Engineering Review PER-7, Nr. 4 (April 1987): 35. http://dx.doi.org/10.1109/mper.1987.5527169.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Wade, Gary L., und William A. Thomas. „COMPUTER COST ESTIMATOR FOR LANDSCAPE INSTALLATION“. HortScience 27, Nr. 11 (November 1992): 1175e—1175. http://dx.doi.org/10.21273/hortsci.27.11.1175e.

Der volle Inhalt der Quelle

Annotation:

Cost estimating and job bidding are among the most complex and time-consuming tasks of landscape professionals. A software package was developed to make cost estimating more accurate and efficient. HORT LAND, computer cost estimator for landscape installation, was developed for IBM compatible PC's using SuperCalc 5 spreadsheet software. The user builds a series of data bases, including an items listing of materials and equipment utilized in his operation along with their associated cost. Then, he defines a series of generic tasks, such as planting a 1-gallon size plant, and refers to the previous items list and associated code numbers for the materials and equipment necessary to install the plant. Once these initial data bases are constructed and saved, the user inputs a plant list, including size and price, then instructs the computer to translate the appropriate data from the initial data bases to arrive at a detailed listing of costs. The program then computes direct job cost and bid price, including overhead and profit.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Berdowska, Sylwia, und Anna Skorek-Osikowska. „Technology of oxygen production in the membranecryogenic air separation system for a 600 MW oxy-type pulverized bed boiler“. Archives of Thermodynamics 33, Nr. 3 (01.09.2012): 61–72. http://dx.doi.org/10.2478/v10173-012-0018-8.

Der volle Inhalt der Quelle

Annotation:

Abstract In this paper the results of the thermodynamic analysis of the oxy-combustion type pulverized bed boiler integrated with a hybrid, membrane- cryogenic oxygen separation installation are presented. For the calculations a 600 MW boiler with live steam parameters at 31.1 MPa /654.9 oC and reheated steam at 6.15 MPa/672.4 oC was chosen. In this paper the hybrid membrane-cryogenic technology as oxygen production unit for pulverized bed boiler was proposed. Such an installation consists of a membrane module and two cryogenic distillation columns. Models of these installations were built in the Aspen software. The energy intensity of the oxygen production process in the hybrid system was compared with the cryogenic technology. The analysis of the influence of membrane surface area on the energy intensity of the process of air separation as well as the influence of oxygen concentration at the inlet to the cryogenic installation on the energy intensity of a hybrid unit was performed.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Liu, Hong Xin, und Xiao Jie Ding. „FEM Research on Deepwater Risers Installation“. Applied Mechanics and Materials 204-208 (Oktober 2012): 4722–25. http://dx.doi.org/10.4028/www.scientific.net/amm.204-208.4722.

Der volle Inhalt der Quelle

Annotation:

Deepwater risers play an important role in the exploration and production of oil and gas. Research of deepwater risers’ installation is so important in the field. This paper proposed a riser FEM models by commercial software ABAQUS, and then, the calculation result is analyzed and main conclusion are obtained.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Paul, Christiane. „Renderings of Digital Art“. Leonardo 35, Nr. 5 (Oktober 2002): 471–84. http://dx.doi.org/10.1162/002409402320774303.

Der volle Inhalt der Quelle

Annotation:

This essay identifies the current qualifier of choice, “new media,” by explaining how this term is used to describe digital art in various forms. Establishing a historical context, the author highlights the pioneer exhibitions and artists who began working with new technology and digital art as early as the late 1960s and early 1970s. The article proceeds to articulate the shapes and forms of digital art, recognizing its broad range of artistic practice: music, interactive installation, installation with network components, software art, and purely Internet-based art. The author examines the themes and narratives specific to her selection of artwork, specifically interactive digital installations and net art. By addressing these forms, the author illustrates the hybrid nature of this medium and the future of this art practice.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Loferski, Joseph R., John C. Bouldin und Daniel P. Hindman. „Development of a Methodology for the Visual Inspection of Engineered Wood Products and Metal Hangers in Residential Construction“. Advanced Materials Research 778 (September 2013): 342–49. http://dx.doi.org/10.4028/www.scientific.net/amr.778.342.

Der volle Inhalt der Quelle

Annotation:

This paper presents the development of a visual inspection methodology for engineered wood products that are commonly used in residential construction in the USA. Engineered wood products include wood composite structural elements such as I-joists, oriented strand board, and structural composite lumber products, and metal plate connected wood trusses. Due to the proprietary nature of wood composite engineered products, there are no uniform standards between different manufacturers for installation and use. If improper installation methods are used, engineered wood products may not be able to safely carry design loads. Improper use or modifications constitute prescriptive code violations. Construction errors that result from the unique installation requirements demonstrate the need for specific inspection methods to detect installation errors early in the construction process. The goal of this research is to develop an expert-validated visual inspection methodology, associated knowledge base, and software application for selected engineered wood products and hanger hardware for non-compliance at the pre-drywall stage of new residential construction. A modified Delphi method was used to solicit and refine inspection methods from subject matter experts. Based on these results, an inspection method and computer software application were developed. The method establishes a systematic expert-validated inspection procedure that identifies known high-risk areas for installation problems for engineered wood products. The software contains the instructions for implementing the inspection method, a reference library of authoritative installation guidelines and illustrations, the ability to document observed defects, and a vehicle to create a report. The experts validated the method and software application, and confirmed the usefulness for detecting construction errors.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Portillo-Villasana, Gerardo de Jesús, Aida Huerta-Barrientos und Yazmin Dillarza Andrade. „Effectiveness of Physical Barriers Installation for Prevention of Incidents in Mexico City’s Subway System“. Journal of Industrial Engineering 2017 (18.06.2017): 1–8. http://dx.doi.org/10.1155/2017/8125430.

Der volle Inhalt der Quelle

Annotation:

Nowadays, suicides inside the installations of subway platforms are considered a public health problem in Mexico City. One solution to prevent them is the installation of physical barriers, but their high cost is unattractive for governmental authorities. Traditional approaches of research on the effectiveness of physical barriers for preventing suicides have been limited to analyzing statistically the effects of installing platform screen doors and blue lights on subway platforms. Although considerable progress has been made in this field, many important issues remain unexplored. This study investigates the effectiveness of physical barriers installation for prevention of incidents in Mexico City subway system by means of an agent-based simulation model. Firstly, the design of physical barriers for prevention of incidents in Mexico City subway system is described. Secondly, a conceptual model of the Zócalo station subway platform is presented. Thirdly, an agent-based simulation model of Zócalo station subway platform is implemented using AnyLogic™ software considering normal operations of the subway station. This study shows that physical barriers installation on the Zócalo subway platform can effectively prevent 76% of passenger’s suicides.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Tan, R., und A. J. Reynolds. „Specification of software for emergency shutdown system of an offshore installation“. IEE Proceedings - Computers and Digital Techniques 143, Nr. 1 (1996): 9. http://dx.doi.org/10.1049/ip-cdt:19960011.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Kuligowska, Elzbieta, Maciej Czuchry, Krzysztof Chyzy, Tomasz Kundera, Carole Roskowinski und Marta Dzielak. „INSTALLATION AND TESTING THE LOFAR SOFTWARE ON ACC CYFRONET CLUSTER PROMETHEUS“. Computer Science 20, Nr. 2 (2019): 165. http://dx.doi.org/10.7494/csci.2019.20.2.2627.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Zhao, X., T. Maeno, T. Wenaus, F. Leuhring, S. Youssef, J. Brunelle, A. De Salvo und A. S. Thompson. „A dynamic system for ATLAS software installation on OSG grid sites“. Journal of Physics: Conference Series 219, Nr. 6 (01.04.2010): 062030. http://dx.doi.org/10.1088/1742-6596/219/6/062030.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Cao, Aixia, Song Sang, Jing Sheng, Shuainan Yu, Guomeng Zhang und Xiao Shi. „Numerical simulation of twin-barge float-over installation on AQWA software“. Cluster Computing 22, S4 (27.02.2018): 8735–46. http://dx.doi.org/10.1007/s10586-018-1962-0.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

KASYANOV, A. E., und ISMAIL KHEBA ISMAIL KHEBA. „INSTALLATION FOR PHYSICAL MODELING OF SALINE SOILS WASHING“. Prirodoobustrojstvo, Nr. 2 (2021): 31–35. http://dx.doi.org/10.26897/1997-6011-2021-2-31-35.

Der volle Inhalt der Quelle

Annotation:

Gradients of salts concentrations of the soil solution, rinsing water pressures, filtration coefficients determine the flow intensity of the salt solutions in the aeration zone. There are known a lot of software for calculating the motion of salt solutions in the porous medium. To assess the accuracy of calculations of the salts movement in the soil, the data of gradient measurements are used. The implementation of the known methods of physical modeling on the soil monoliths mounted according to Astapov, lysimetric installations, in experimental leaching of saline soils in the field requires significant material investments, labor and time. Minimum material and labor costs are required for the assembly and use of the proposed design of the installation for physical modeling of saline soil washing. A working prototype of the installation has been developed. It includes piezometers, a case, units of piezometers connection, sampling of soil moisture combined with soil electrodes, equalizing drain, rotating part of the case. Piezometers, drains and connecting hoses, soil moisture sampling unit. The installation case is assembled of separate branch pipes equipped with necks and sealing rings. Filtration investigations and gradient measurements of the salts movement are carried out on the installation. The tests of the installation prototype were fulfilled in the field on the sand pit reclamation map located in the floodplain of the Gzhelka and Moskva rivers of the Ramensk region of the Moscow area. The profile filtration coefficients measured at the installation – 2.33 ± 0.031 m / day and in the field conditions – 2.36 ± 0.041 m / day do not differ significantly.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Shields, R. V. „User’s Perspective of CAD/CAM Software“. Journal of Ship Production 4, Nr. 04 (01.11.1988): 280–85. http://dx.doi.org/10.5957/jsp.1988.4.4.280.

Der volle Inhalt der Quelle

Annotation:

Great emphasis has been attached to the achievement of productivity and producibility benefits through the application of computer-aided design and computer-aided manufacturing (CAD/CAM) technologies. To ensure the achievement of these benefits, it is important that the end user have appropriate software and be able to use it to his advantage. The proper procurement, customization, installation, training, and implementation of software can play a significant role in the effectiveness of CAD/CAM.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Cao, Yuan, Zhi Han, Rui Kong, Canlin Zhang und Qiu Xie. „Technical Composition and Creation of Interactive Installation Art Works under the Background of Artificial Intelligence“. Mathematical Problems in Engineering 2021 (25.09.2021): 1–11. http://dx.doi.org/10.1155/2021/7227416.

Der volle Inhalt der Quelle

Annotation:

Interactive installation art is a kind of art that uses specific software and computer hardware as a platform, a platform for interaction between humans and machines or different people through computer hardware. It is an interactive art that uses material installations in nature as a medium. Traditional interactive installation art is not safe and convenient, in order to solve the shortcomings of traditional interactive installation art. This article introduces artificial intelligence technology by studying the overview, development, and application of artificial intelligence. The encryption algorithm for artificial intelligence data protection and the BP neural network prediction model under artificial intelligence are also introduced to ensure the safety of interactive installation art works. The part also introduces the creation tools and creation process of interactive installation art works. Finally, in the analysis part, a questionnaire analysis of the World Expo is carried out. The results of this article show that the art of connecting inserts is the most complete and open design era. Advances in science and technology, the development of digital art, and the needs of human life have led to the development of interconnected input technologies. In addition, in the survey of people’s satisfaction with artificial intelligence, we can conclude that 89% of people think that the security of artificial intelligence technology is very high. Yes, 92% of people think that artificial intelligence technology has a fast computing speed, 86% of people think that artificial intelligence technology is low in cost.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Seak, Sea Chong, Chang Pei Shan, Wong Hon Loon und Dahlia Din. „Research Institution Software Development Process Improvement: to Produce High Quality Research Software & Assessment on Technical and Software Package Installation“. Journal of Physics: Conference Series 1069 (August 2018): 012057. http://dx.doi.org/10.1088/1742-6596/1069/1/012057.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Wang, J., und O. Kieran. „Offshore Safety Assessment and Safety-Based Decision-Making—The Current Status and Future Aspects“. Journal of Offshore Mechanics and Arctic Engineering 122, Nr. 2 (18.08.1999): 93–99. http://dx.doi.org/10.1115/1.533730.

Der volle Inhalt der Quelle

Annotation:

The offshore installations (safety case) regulations were developed in the UK in 1992 and came into force in 1993 in response to the accepted findings of the Piper Alpha enquiry. Recently, “the offshore installations and wells (design and construction, etc.) regulations” (DCR 1996) were introduced to offshore safety analysis. From the earliest stages of the installation’s life cycle, operators must ensure that all safety-critical elements in both the software and system domains be assessed. Hazards can be identified and the risks associated with them can be assessed and evaluated using a number of techniques and decision-making strategies, all aimed at producing an installation with lifetime safety integrity. In this paper, following a brief review of the current status of offshore safety regulation in the UK, several offshore safety assessment frameworks are presented. These include top-down, bottom-up, probabilistic, and subjective approaches. The conditions under which each approach may be applied effectively and efficiently are discussed. Probabilistic safety-based decision-making and subjective safety-based decision-making are then studied. Two examples are used to demonstrate the decision-making approaches. Recommendations on further development in offshore safety analysis are suggested. [S0892-7219(00)00901-8]

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Ahmed, Khandakar, Jan Blech, Mark Gregory und Heinz Schmidt. „Software Defined Networks in Industrial Automation“. Journal of Sensor and Actuator Networks 7, Nr. 3 (06.08.2018): 33. http://dx.doi.org/10.3390/jsan7030033.

Der volle Inhalt der Quelle

Annotation:

Trends such as the Industrial Internet of Things and Industry 4.0 have increased the need to use new and innovative network technologies in industrial automation. The growth of industrial automation communications is an outcome of the shift to harness the productivity and efficiency of manufacturing and process automation with a minimum of human intervention. Due to the ongoing evolution of industrial networks from Fieldbus technologies to Ethernet, a new opportunity has emerged to harness the benefits of Software Defined Networking (SDN). In this paper, we provide a brief overview of SDN in the industrial automation domain and propose a network architecture called the Software Defined Industrial Automation Network (SDIAN), with the objective of improving network scalability and efficiency. To match the specific considerations and requirements of having a deterministic system in an industrial network, we propose two solutions for flow creation: the Pro-active Flow Installation Scheme and the Hybrid Flow Installation Scheme. We analytically quantify the proposed solutions that alleviate the overhead incurred from the flow setup. The analytical model is verified using Monte Carlo simulations. We also evaluate the SDIAN architecture and analyze the network performance of the modified topology using the Mininet emulator. We further list and motivate SDIAN features and report on an experimental food processing plant demonstration featuring Raspberry Pi as a software-defined controller instead of traditional proprietary Programmable Logic Controllers. Our demonstration exemplifies the characteristics of SDIAN.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Ahmed, Daniyal, Ateeqa Dawood, Muhammad Rafey und Mudassar Hussain. „Flow Installation Mechanisms in SDN“. WSEAS TRANSACTIONS ON COMMUNICATIONS 20 (26.07.2021): 101–7. http://dx.doi.org/10.37394/23204.2021.20.12.

Der volle Inhalt der Quelle

Annotation:

Software Defined Networking (SDN) has developed tremendously in the recent years. This paper addresses different flow installation mechanisms. The idea of a programmable network which is the foundation of SDN ensures dynamic network management by separating the control plane from data and management planes. In SDN the control plane resides in SDN Controller, which is responsible for the installation of flows on the data plane. Whenever a flow enters into an SDN switch, flow tables are generated for those flows and installed at data plane from the control plane. These flows have their own properties because of their relevant protocols which are attached to them. A flow consists of a matching pattern, actions, and counter. Based on the respective flow, data communication takes place. This paper investigates three kinds of flow installation mechanisms, reactive, proactive and hybrid. Based on these three flow installation mechanisms, we have analysed the performance of SDN by using different performance metrics. We have used the Mininet and POX controller to evaluate the performance analysis in Ubuntu and Windows-based environments. Finally, we have drawn conclusions

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Bienstock, Daniel, Sunil Chopra, Oktay Günlük und Chih-Yang Tsai. „Minimum cost capacity installation for multicommodity network flows“. Mathematical Programming 81, Nr. 2 (April 1998): 177–99. http://dx.doi.org/10.1007/bf01581104.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Rahman, Nayem, Peter W. Burkhardt und Kevin W. Hibray. „Object Migration Tool for Data Warehouses“. International Journal of Strategic Information Technology and Applications 1, Nr. 4 (Oktober 2010): 55–73. http://dx.doi.org/10.4018/jsita.2010100104.

Der volle Inhalt der Quelle

Annotation:

Data warehouses contain numerous software applications and thousands of objects that make those applications work. Many companies maintain multiple data warehouses depending on business requirements for example development, testing and production. Installing objects and keeping them synchronized across all environments can be a challenging task due to the sheer number of objects and complexity. Software objects stored in a Source Control system must be installed on target warehouse environments. Manual copy procedures are possible but very inefficient. Developers spend much time preparing installation and migration scripts that are prone to syntax errors. This paper proposes an Object Migration and Apply Tool (OMAT) that automates software installation across all warehouses for anyone using manual procedures. An automated tool can help eliminate error prone manual procedures, increase flawless object installation and reduce installation time. The OMAT tool is easy to use through a web browser and includes many useful features that support the development life cycle, the Sarbanes-Oxley (SOX) Act requirements and enforce numerous business requirements. OMAT is designed to support the construction and maintenance of an enterprise-wide, strategic data warehouse faster and better.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Daly, P. „Review: Linux (Installation, Configuration, Use)“. Computer Bulletin 42, Nr. 1 (01.01.2000): 31. http://dx.doi.org/10.1093/combul/42.1.31.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Fernández, Miguel Ángel Fernández, Juan Luis Carús Candás, Pablo Barredo Gil, Antonio Miranda de la Torre und Gabriel Díaz Orueta. „An Industry 4.0 Approach for Photovoltaic Plants Monitoring“. Proceedings 2, Nr. 23 (05.11.2018): 1409. http://dx.doi.org/10.3390/proceedings2231409.

Der volle Inhalt der Quelle

Annotation:

The exploitation of photovoltaic energy has experienced a great growth worldwide in recent years. Photovoltaic installations are characterized by the presence of a large number of devices and elements. This situation makes the operation and performance of a photovoltaic installation dependent of a large number of parameters and variables. Moreover, due to the size of some photovoltaic installations, a high volume of heterogeneous data is produced. Traditional approaches cannot tackle with such a huge amount of generated data. Through the adoption of a software architecture based on Industry 4.0. Key Enabling Technologies (such as Internet of Things and Big Data, among others), it is possible to improve the monitoring and operation procedures of photovoltaic plants.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

De Salvo, A., A. De Silva, D. Benjamin, J. Blomer, P. Buncic, A. Harutyunyan, A. Undrus und Y. Yao. „Software installation and condition data distribution via CernVM File System in ATLAS“. Journal of Physics: Conference Series 396, Nr. 3 (13.12.2012): 032030. http://dx.doi.org/10.1088/1742-6596/396/3/032030.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

马, 元帅. „Application of P6 Software in Project Management of Shield Tunnel Piping Installation“. Journal of Oil and Gas Technology 40, Nr. 02 (2018): 102–7. http://dx.doi.org/10.12677/jogt.2018.402033.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Hussain, Mudassar, und Nadir Shah. „Automatic rule installation in case of policy change in software defined networks“. Telecommunication Systems 68, Nr. 3 (09.11.2017): 461–77. http://dx.doi.org/10.1007/s11235-017-0404-2.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Guan, Hui Sheng, Ke Long Luo und Dong Dong. „Simulation Analysis of Support Installation Vehicle’s Working Unit Based on ADAMS“. Advanced Materials Research 482-484 (Februar 2012): 1707–12. http://dx.doi.org/10.4028/www.scientific.net/amr.482-484.1707.

Der volle Inhalt der Quelle

Annotation:

This paper introduces the structural composition and the working principle of the support installation vehicle. The 3D model of the support installation vehicle is established in SolidWorks and imported into ADAMS. Then the virtual prototyping model of the support installation vehicle is established with ADAMS software. The dynamically leveling angle curve of the leveling mechanism is obtained by the simulation analysis. Curves of cylinders’ driving force and the joint force are also derived. The results of simulation analysis contribute to the finite element analysis of working unit and the designs of cylinders of the support installation vehicle.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Devisetty, Upendra Kumar, Kathleen Kennedy, Paul Sarando, Nirav Merchant und Eric Lyons. „Bringing your tools to CyVerse Discovery Environment using Docker“. F1000Research 5 (21.06.2016): 1442. http://dx.doi.org/10.12688/f1000research.8935.1.

Der volle Inhalt der Quelle

Annotation:

Docker has become a very popular container-based virtualization platform for software distribution that has revolutionized the way in which scientific software and software dependencies (software stacks) can be packaged, distributed, and deployed. Docker makes the complex and time-consuming installation procedures needed for scientific software a one-time process. Because it enables platform-independent installation, versioning of software environments, and easy redeployment and reproducibility, Docker is an ideal candidate for the deployment of identical software stacks on different compute environments such as XSEDE and Amazon AWS. CyVerse’s Discovery Environment also uses Docker for integrating its powerful, community-recommended software tools into CyVerse’s production environment for public use. This paper will help users bring their tools into CyVerse Discovery Environment (DE) which will not only allows users to integrate their tools with relative ease compared to the earlier method of tool deployment in DE but will also help users to share their apps with collaborators and release them for public use.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Devisetty, Upendra Kumar, Kathleen Kennedy, Paul Sarando, Nirav Merchant und Eric Lyons. „Bringing your tools to CyVerse Discovery Environment using Docker“. F1000Research 5 (22.11.2016): 1442. http://dx.doi.org/10.12688/f1000research.8935.2.

Der volle Inhalt der Quelle

Annotation:

Docker has become a very popular container-based virtualization platform for software distribution that has revolutionized the way in which scientific software and software dependencies (software stacks) can be packaged, distributed, and deployed. Docker makes the complex and time-consuming installation procedures needed for scientific software a one-time process. Because it enables platform-independent installation, versioning of software environments, and easy redeployment and reproducibility, Docker is an ideal candidate for the deployment of identical software stacks on different compute environments such as XSEDE and Amazon AWS. Cyverse's Discovery Environment also uses Docker for integrating its powerful, community-recommended software tools into CyVerse's production environment for public use. This paper will help users bring their tools into CyVerse DE which will not only allows users to integrate their tools with relative ease compared to the earlier method of tool deployment in DE but also help users to share their apps with collaborators and also release them for public use.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Devisetty, Upendra Kumar, Kathleen Kennedy, Paul Sarando, Nirav Merchant und Eric Lyons. „Bringing your tools to CyVerse Discovery Environment using Docker“. F1000Research 5 (05.12.2016): 1442. http://dx.doi.org/10.12688/f1000research.8935.3.

Der volle Inhalt der Quelle

Annotation:

Docker has become a very popular container-based virtualization platform for software distribution that has revolutionized the way in which scientific software and software dependencies (software stacks) can be packaged, distributed, and deployed. Docker makes the complex and time-consuming installation procedures needed for scientific software a one-time process. Because it enables platform-independent installation, versioning of software environments, and easy redeployment and reproducibility, Docker is an ideal candidate for the deployment of identical software stacks on different compute environments such as XSEDE and Amazon AWS. Cyverse's Discovery Environment also uses Docker for integrating its powerful, community-recommended software tools into CyVerse's production environment for public use. This paper will help users bring their tools into CyVerse DE which will not only allows users to integrate their tools with relative ease compared to the earlier method of tool deployment in DE but also help users to share their apps with collaborators and also release them for public use.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Nyaichyai, Lila, Goma Luitel und Ram Krishna Maharjan. „Experiences of Library Professionals on DSpace Installation“. Nepal Journal of Multidisciplinary Research 4, Nr. 2 (29.08.2021): 93–105. http://dx.doi.org/10.3126/njmr.v4i2.39177.

Der volle Inhalt der Quelle

Annotation:

DSpace, a free and open-source software (FOSS) provides the digital platform for building collections of an institution. Due to the lack of the skills to install and configure DSpace, librarians are incapable to conduct it even after the awareness about it. Identifying challenges about DSpace installation is vital to increase its use by librarians. Hence, it aims to explore the understanding of DSpace installation among librarians and to identify aspects of their experiences and feelings while installing DSpace. Librarians' experiences and feelings are important for accepting the software. Librarians were interviewed during the training program conducted on digital library technology from December 2020 to January 2021. Two groups were distinguishing from each other: one is with a library science background and another is with computer science and engineering background. The second group aswas self-sustained to install DSpace, once they got the guidelines for installation. Their views were reflected with the code terms status, exploration, feeling, activities, preferences, and inadequacy. Through their experiences, the aspects of challenges are the less experience of using the command line in computer use, the unavailability of teaching courses on Linux operating system in Library and Information Science (LIS) education, and the lack of self-exploration habits. Practice to Linux commands, incorporate the Linux in the Library Science course, self-exploration, and consistent effort will help librarians in installing DSpace by themselves. Finally, librarians should internalize their goal to act as the administrator for the DSpace, not only as of the operator.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Zeitschriftenartikel zum Thema „Software installation“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an