Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Shortening and vergence.
Zeitschriftenartikel zum Thema „Shortening and vergence“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Shortening and vergence" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.
1
Greenhalgh, Scott R., John H. McBride, John M. Bartley, R. William Keach, Brooks B. Britt und Bart J. Kowallis. „Along-strike variability of thrust fault vergence“. Interpretation 3, Nr. 3 (01.08.2015): SX1—SX12. http://dx.doi.org/10.1190/int-2014-0182.1.
Der volle Inhalt der QuelleAnnotation:
The 3D kinematic evolution of thrust systems, in which vergence changes along strike, is poorly understood. This study uses 3D seismic data from Big Piney-LaBarge field, Wyoming, to examine the geometry and kinematics of two faults at the leading edge of the Hogsback thrust sheet, the frontal thrust of the Late Cretaceous Sevier fold-thrust belt. These thrusts lie along strike of each another and share an east-vergent detachment within the Cretaceous Baxter Shale. The two thrusts verge in opposite directions: The southern thrust verges eastward forming a frontal ramp consistent with major thrusts of the Sevier belt, whereas the northern thrust verges westward to form a type 1 triangle zone with the Hogsback thrust. The thrusts have strike lengths of 5 km (3.1 mi) and 8 km (5.0 mi), respectively, and they are separated by a transfer zone of less than 0.5 km (0.3 mi) wide. Strata in the transfer zone appear to be relatively undeformed, but reflections are less coherent here, which suggests small offsets unresolved by the seismic survey. Retrodeformable cross sections and a structure contour map on the Cretaceous Mesaverde Group indicate that shortening varies along strike, with a pronounced minimum at the transfer zone and greater shortening across the northern, west-vergent thrust (610 m [2000 ft]) than across the southern, east-vergent thrust (230 m [755 ft]). Mapping of these thrusts suggests that they propagated laterally toward each other to form a type 1 antithetic fault linkage in the transfer zone. Spatial patterns expressed in seismic attributes in and near the detachment horizon, which include waveform classification and spectral decomposition, suggest that stratigraphic variations may have pinned the detachment, thus localizing the transfer zone. Thickness variations in the thrust sheet also may have influenced the thrust geometry. Our study provides an analog for analysis of similar complex contractional belts around the world.
2
Vasconcelos, Bruno Rodrigo, Amarildo Salina Ruiz und João Batista de Matos. „Polyphase deformation and metamorphism of the Cuiabá group in the Poconé region (MT), Paraguay Fold and Thrust Belt: kinematic and tectonic implications“. Brazilian Journal of Geology 45, Nr. 1 (März 2015): 51–63. http://dx.doi.org/10.1590/23174889201500010004.
Der volle Inhalt der QuelleAnnotation:
Several deformation models have been proposed for the Paraguay Belt, which primarily differ in the number of phases of deformation, direction of vergence and tectonic style. Structural features presented in this work indicate that the tectonics was dominated by low dip thrust sheets in an initial phase, followed by two progressive deformation phases. The first phase of deformation is characterized by a slate cleavage and axial plane of isoclinal recumbent folds with a NE axial direction, with a recrystallization of the minerals in the greenschist facies associated with horizontal shear zones with a top-to-the-SE sense of movement. The second stage shows vergence towards the NW, characterized by crenulation cleavage axial plane to F2 open folds over S0 and S1, locally associated with reverse faults. The third phase of deformation is characterized by subvertical faults and fractures with a NW direction showing sinistral movement, which are commonly filled by quartz veins. The collection of tectonic structures and metamorphic paragenesis described indicate that the most intense deformation at the deeper crustal level, greenschistfacies, occurred during F1, which accommodated significant crustal shortening through isoclinal recumbent folds and shear zones with low dip angles and hangwall movement to the SE, in a thin-skinned tectonic regime. The F2 deformation phase was less intense and had a brittle to ductile behavior that accommodated a slight shortening through normal open subvertical folds, and reverse faults developed in shallower crustal level, with vergence towards the Amazonian Craton. The third phase was less pervasive, and the shortening was accommodated by relief subvertical sinistral faults.
3
Gracia-Marroquín, Diego, Mariano Cerca, Dora Carreón-Freyre und Bernardino Barrientos-García. „Analogue model of gravity driven deformation in the salt tectonics zone of northeastern Mexico“. Revista Mexicana de Ciencias Geológicas 35, Nr. 3 (22.11.2018): 277–90. http://dx.doi.org/10.22201/cgeo.20072902e.2018.3.739.
Der volle Inhalt der QuelleAnnotation:
In the deep seated gravity-driven deformation systems of the Gulf of Mexico contemporaneous extension and contraction of the overburden is favored by mechanical decoupling from the basement along thick salt sequences (up to 4 km). The updip extension is located inland, on the continental shelf of northeast Mexico, and is characterized by extensional listric faults and roll-overs; the downdip shortening zone is located at the deep waters and is characterized by a fold and thrust belt detached above the salt layer. Two physical experiments are used to discuss some aspects of these gravity-driven systems. The experimental setup includes a motor-driven experimental table, an inclined brittle basement (1°), a silicone layer simulating the salt sequences, and sand layers simulating the pre-kinematic Jurassic-Cretaceous strata before Laramide shortening. Deformation resulted in further tilting of the basement (3° to 4°). After the onset of deformation, thin sand layers were added at regular time intervals simulating the syntectonic sedimentation. The experiments reproduced the geometry of the deformation at the frontal ramp characterized by a seaward vergent thrust and its associated deformed region (the Perdido fold belt). The fold and thrust belt localization was favored by the change in basement inclination (a built-in slope change). Key elements interpreted in one available section of the area were reproduced in the model: a) the presence of an antithethic roll-over in the extensional zone and, b) the basinward vergence of folds and thrusts observed in the downdip shortening zone in the mexican Perdido fold belt.
4
Carboni, Filippo, Francesco Brozzetti, Francesco Mirabella, Francesco Cruciani, Massimiliano Porreca, Maurizio Ercoli, Stefan Back und Massimiliano R. Barchi. „Geological and geophysical study of a thin-skinned tectonic wedge formed during an early collisional stage: the Trasimeno Tectonic Wedge (Northern Apennines, Italy)“. Geological Magazine 157, Nr. 2 (27.06.2019): 213–32. http://dx.doi.org/10.1017/s001675681900061x.
Der volle Inhalt der QuelleAnnotation:
AbstractThe presence of a set of well-known turbidite successions, deposited in progressively E-migrating foredeep basins and subsequently piled up with east vergence, makes the Northern Apennines of Italy paradigmatic of the evolution of deepwater fold-and-thrust belts. This study focuses on the early Apenninic collisional stage, early Miocene in age, which led to the accretion of the turbidites of the Trasimeno Tectonic Wedge (TTW), in the central part of the Northern Apennines. Based on the interpretation of previously unpublished seismic reflection profiles with new surface geology data and tectonic balancing, we present a detailed tectonic reconstruction of the TTW. In the study area, the TTW is characterized by a W-dipping shaly basal décollement located at a depth of 1–5 km. The tectonic wedge is c. 5 km thick at its central-western part and tapers progressively eastwards to c. 1 km. The total shortening, balanced along a 33 km long cross-section, is c. 60 km, including 20 km (40%) of internal imbrication, c. 23 km of horizontal ENE-wards translation along the basal décollement and c. 17 km of passive translation caused by the later shortening of footwall units. Deformation balancing, constrained through upper Aquitanian – upper Burdigalian (c. 21–16 Ma) biostratigraphy, provides an average shortening rate of c. 8.6 mm a–1. Internal shortening of the TTW shows an average shortening rate of c. 4 mm a–1 for this period.
5
van Kooten, Willemijn Sarah Maria Theresia, Hugo Ortner, Ernst Willingshofer, Dimitrios Sokoutis, Alfred Gruber und Thomas Sausgruber. „Fold localization at pre-existing normal faults: field observations and analogue modelling of the Achental structure, Northern Calcareous Alps, Austria“. Solid Earth 15, Nr. 1 (02.02.2024): 91–120. http://dx.doi.org/10.5194/se-15-91-2024.
Der volle Inhalt der QuelleAnnotation:
Abstract. Within the Northern Calcareous Alps (NCA) fold-and-thrust belt of the Eastern Alps, multiple pre-shortening deformation phases have contributed to the structural grain that controlled localization of deformation at later stages. In particular, Jurassic rifting and opening of the Alpine Tethys led to the formation of extensional basins at the northern margin of the Apulian plate. Subsequent Cretaceous shortening within the Northern Calcareous Alps produced the enigmatic Achental structure, which forms a sigmoidal transition zone between two E–W-striking major synclines. One of the major complexities of the Achental structure is that all structural elements are oblique to the Cretaceous direction of shortening. Its sigmoidal form was, therefore, proposed to be a result of forced folding at the boundaries of the Jurassic Achental basin. This study analyses the structural evolution of the Achental structure through integrating field observations with crustal-scale physical analogue modelling to elucidate the influence of pre-existing crustal heterogeneities on oblique basin inversion. From brittle–ductile models that include a weak basal décollement, we infer that oblique shortening of pre-existing extensional faults can lead to the localization of deformation at the pre-existing structure and predicts thrust and fold structures that are consistent with field observations. Consequently, the Achental low-angle thrust and sigmoidal fold train was able to localize at the former Jurassic basin margin, with a vergence opposite to the controlling normal fault, creating the characteristic sigmoidal morphology during a single phase of NW-directed shortening.
6
McLoon, Linda K., Han na Park, Jong-Hee Kim, Fatima Pedrosa-Domellöf und LaDora V. Thompson. „A continuum of myofibers in adult rabbit extraocular muscle: force, shortening velocity, and patterns of myosin heavy chain colocalization“. Journal of Applied Physiology 111, Nr. 4 (Oktober 2011): 1178–89. http://dx.doi.org/10.1152/japplphysiol.00368.2011.
Der volle Inhalt der QuelleAnnotation:
Extraocular muscle (EOM) myofibers do not fit the traditional fiber typing classifications normally used in noncranial skeletal muscle, in part, due to the complexity of their individual myofibers. With single skinned myofibers isolated from rectus muscles of normal adult rabbits, force and shortening velocity were determined for 220 fibers. Each fiber was examined for myosin heavy chain (MyHC) isoform composition by densitometric analysis of electrophoresis gels. Rectus muscle serial sections were examined for coexpression of eight MyHC isoforms. A continuum was seen in single myofiber shortening velocities as well as force generation, both in absolute force (g) and specific tension (kN/m2). Shortening velocity correlated with MyHCIIB, IIA, and I content, the more abundant MyHC isoforms expressed within individual myofibers. Importantly, single fibers with similar or identical shortening velocities expressed significantly different ratios of MyHC isoforms. The vast majority of myofibers in both the orbital and global layers expressed more than one MyHC isoform, with up to six isoforms in single fiber segments. MyHC expression varied significantly and unpredictably along the length of single myofibers. Thus EOM myofibers represent a continuum in their histological and physiological characteristics. This continuum would facilitate fine motor control of eye position, speed, and direction of movement in all positions of gaze and with all types of eye movements—from slow vergence movements to fast saccades. To fully understand how the brain controls eye position and movements, it is critical that this significant EOM myofiber heterogeneity be integrated into hypotheses of oculomotor control.
7
Wu, Jonny, Ken McClay und Jose de Vera. „Growth of triangle zone fold-thrusts within the NW Borneo deep-water fold belt, offshore Sabah, southern South China Sea“. Geosphere 16, Nr. 1 (19.12.2019): 329–56. http://dx.doi.org/10.1130/ges02106.1.
Der volle Inhalt der QuelleAnnotation:
Abstract The NW Borneo deep-water fold-and-thrust belt, offshore Sabah, southern South China Sea, contains a structurally complex region of three to four seafloor ridges outboard of the shelf-slope break. Previous studies have suggested the seafloor ridges formed either above shale diapirs produced by mass movement of overpressured shales (i.e., mobile shale) or above an imbricate fold-and-thrust array. Here, we performed tectonostratigraphic analyses on a petroleum industry three-dimensional (3-D) seismic volume that imaged the full growth stratal record. We show fold growth history, deformation styles, along-strike structural variabilities, and synkinematic sedimentation during triangle zone–style fold growth. Nine seismic horizons within growth strata were mapped and correlated to petroleum industry seismostratigraphy. Synkinematic sedimentation interactions with growing folds and near-surface strains were analyzed from seismic attribute maps. We interpret that the seafloor structures were formed by imbricate thrusts above multiple detachments. We estimate ∼8 km minimum shortening since the late Miocene ca. 10 Ma. The folds show oversteepened fold forelimbs, back-rotated backlimbs, and forward-vergent (NW to NNW) “blind” thrust ramps that terminate within the growth strata. Fold cores show evidence of internal shear. Immature folds show detachment fold geometries, whereas mature folds show forelimb break thrusts, type I triangle zones, and rotated forward-vergent roof thrusts. Thrust linkages spaced ∼10 km apart were exploited as thrust top synkinematic sedimentation pathways; the linkages also partition near-surface strains. Our comprehensive, three-dimensional documentation of triangle zone fold growth and sedimentation in a deep-water fold belt highlights internal shear, multiple detachments, and opposite thrust vergence; mobile shales are not required to explain the deformation.
8
Pinet, Nicolas, Sébastien Castonguay und Alain Tremblay. „Thrusting and back thrusting in the Taconian internal zone, southern Quebec Appalachians“. Canadian Journal of Earth Sciences 33, Nr. 9 (01.09.1996): 1283–93. http://dx.doi.org/10.1139/e96-097.
Der volle Inhalt der QuelleAnnotation:
Cambro-Ordovician continental-margin rocks of the Humber zone of the Quebec Appalachians were mainly deformed during the Taconian orogeny (Middle Ordovician to Early Silurian). Two Taconian deformational events are recorded west of the Sutton–Notre-Dame mountains anticlinorium axis. They are characterized, respectively, by northwest-directed faulting and synmetamorphic folding (D1−2) and by southeastward back-thrusting motion (D3); the latter deformation has previously been poorly documented in the Quebec Appalachians. This duality of structural vergence is probably induced by the progressive tectonic wedging of basement rocks during a nearly constant northwest–southeast Taconian shortening. In correlative higher grade metamorphic rocks of New England, back-thrusting structures (D3) have not been described and are most probably absent because their root zone is located well above the present-day erosional surface of that part of the Appalachian belt.
9
Qaisar, Sohail, Sajjad Ahmad, Mukhtiar Ghani und Tehseen Ullah. „The Regional Extents of Local Thrust Systems in Jabbari and Rupper Town, South East of Hazara Pakistan“. Pakistan Journal of Scientific & Industrial Research Series A: Physical Sciences 65, Nr. 1 (22.02.2022): 87–96. http://dx.doi.org/10.52763/pjsir.phys.sci.65.1.2022.87.96.
Der volle Inhalt der QuelleAnnotation:
Geological traverse between the town of Jabbri and Rupper, southeast Hazara delineates the stratigraphic and structural element of the area presented by high resolution geological map and cross section of the area. Oldest rocks in this section is Precambrian Hazara formation which is disconformably overlain by a Jurassic to Eocene sequence including Samana Suk, Chichali, Lumshiwal, Kawagarh, Hangu, Lockhart, Patala, Margalla-hill-limestone, Chorgali and Kuldana formations. Located in Lesser Himalayas, under the influence of main boundary thrust (MBT), this area developed several thrust systems from north to south including Hazara thrust, Haro thrust, Sangoda thrust, Rupper thrust. The main regional Hazara thrust has Precambrian rock in its hanging wall thrusted over the Jurassic Samna Suk formation. In lower detachment, there are several local thrust systems within Jurassic-Eocene strata.These thrusts trends in NE-SW direction indicating NW-SE compressional regime with the hanging wall Drag folds showing southward vergence. The stereographic plot of mesoscopic scale folds shows at least three folding events and varying plunging directions between the range of 240° and 290°. Most of the folds are plunging towards west and this is yet another indicator of east-west compressional forces. These folds orientations suggest transpressional deformation rather than pure compression. The balanced restore section shows that there is about 2.5 km shortening along 15 km restored section which makes about 16% shortening along the section.
10
Högdahl, Karin, und Stefan Bergman. „Chapter 5 Paleoproterozoic (1.9–1.8 Ga), syn-orogenic magmatism and sedimentation in the Ljusdal lithotectonic unit, Svecokarelian orogen“. Geological Society, London, Memoirs 50, Nr. 1 (2020): 131–53. http://dx.doi.org/10.1144/m50-2016-30.
Der volle Inhalt der QuelleAnnotation:
AbstractDuctile shear zones with dextral transpressive deformation separate the Ljusdal lithotectonic unit from the neighbouring units (Bothnia–Skellefteå and Bergslagen) in the 2.0–1.8 Ga Svecokarelian orogen. Sedimentation steered by regional crustal extension at c. 1.86–1.83 Ga was sandwiched between two separate phases of ductile strain with crustal shortening and predominantly high-grade metamorphism with plutonic activity. Metamorphism occurred under low-pressure, medium- to high-temperature conditions that locally reached granulite facies. The earlier shortening event resulted in the accretion of outboard sedimentary and c. 1.89 Ga volcanic rocks (formed in back- or inter-arc basin and volcanic arc settings, respectively) to a continental margin. Fabric development (D1), the earlier phase of low-pressure and variable temperature metamorphism (M1) and the intrusion of a predominantly granitic to granodioritic batholith with rather high εNd values (the Ljusdal batholith) occurred along this active margin at 1.87–1.84 Ga. Thrusting with westerly vergence, regional folding and ductile shearing (D2–3), the later phase of low-pressure and variable temperature metamorphism (M2), and the subsequent minor shear-related intrusion of granite, again with relatively high εNd values, prevailed at 1.83–1.80 Ga. Mineral deposits include epithermal Au–Cu deposits hosted by supracrustal rocks, V–Fe–Ti mineralization in subordinate gabbro and norite bodies inside the Ljusdal batholith, and graphite in metasedimentary rocks.
11
Barrera, Daniel, Andrés Mora und Eliseo Tesón. „Structural analysis of the Bogotá Anticline, Colombian Eastern Cordillera: Implications on deformational styles of the Llanos Foothills“. Revista Boletín de Geología 41, Nr. 3 (30.09.2019): 15–30. http://dx.doi.org/10.18273/revbol.v41n3-2019001.
Der volle Inhalt der QuelleAnnotation:
In this study we describe and discuss a structural analysis of the Bogotá Anticline, based on the creation of a new geological map and structural cross sections, to propose a model of evolution for the folding. The Bogotá Anticline is a complex geological structure with important variations in vergence and geometry over very short distances. Because of that, its formation was previously associated with gravitational collapses. The Bogotá Anticline is located in the Bogotá Plateau, which is part of the axial zone of the Eastern Cordillera of Colombia. We propose that this fold displays a lateral variation that evidence different stages of deformation of a faulted detachment fold with a detachment horizon located in the Chipaque Formation. A proposed thrust fault located to the east of the structure could generate the necessary shortening for the formation of this fold. The proposed model may serve as an analogue in an earlier less deformed state for the folds observed in similar rocks of the Llanos foothills.
12
Zamora-Valcarce, Gonzalo, und Tomás Zapata. „Building a valid structural model in a triangle zone: An example from the Neuquén fold and thrust belt, Argentina“. Interpretation 3, Nr. 4 (01.11.2015): SAA117—SAA131. http://dx.doi.org/10.1190/int-2015-0014.1.
Der volle Inhalt der QuelleAnnotation:
Structural modeling and systematic analysis are necessary in complex areas even before seismic interpretation. Seismic data in these zones usually show poor-quality images of the geologic elements. Therefore, a detailed analysis of the available information (e.g., seismic, previous wells, and surface geology) is needed to build a comprehensive structural model to constrain the seismic interpretation. Although a restorable structural cross section is not necessarily the unique solution, it is a valid interpretation to begin with, which can be tested against additional information. As an example, a structural profile interpretation in the Agrio fold and thrust belt of the Neuquén Basin, northeastern Argentina, is presented and described as invalid on the basis of several unrestorable geometric components. This led to the reevaluation of the structure to understand its possible exploratory potential. Integration of different data such as regional structural styles inferred fault trajectories from seismic reflection termination patterns, synorogenic deposit geometries in seismic, and surface geology, dipmeter data to identify the presence and location of fault position and vergence of the fold axis, and a kinematic forward model, resulted in a new restorable structural model. The new interpretation proposes a “broken triangle zone” framed by two opposite surface anticlines with the same detachment level, later faulted by a basement fault. The interpreted model suggests at least two phases of deformation (1) a thin-skinned phase with the two opposite anticlines sharing the same detachment level that is responsible for about 80% of the shortening and (2) a thick-skinned phase from an east-verging basement fault, transporting the western anticline and crosscutting the eastern anticline, that is responsible for 20% of the shortening and the synorogenic deposits at the frontal region. This new interpretation defined a new exploration prospect drilled by a wildcat well, which validated the interpretation and model predictions.
13
Clinkscales, Christopher, und Paul Kapp. „Structural style and kinematics of the Taihang-Luliangshan fold belt, North China: Implications for the Yanshanian orogeny“. Lithosphere 11, Nr. 6 (18.09.2019): 767–83. http://dx.doi.org/10.1130/l1096.1.
Der volle Inhalt der QuelleAnnotation:
Abstract The Middle–Late Jurassic to earliest Cretaceous fold belts of the Yanshanian orogen in North China remain enigmatic with respect to their coeval deformation histories and possible relationship to the contemporaneous Cordilleran-style margin of eastern Asia. We present geological mapping, structural data, and a >400-km-long, strike-perpendicular balanced cross section for the Taihang-Luliangshan fold belt exposed in the late Cenozoic central Shanxi Rift. The northeast-southwest–trending Taihang-Luliangshan fold belt consists of long-wavelength folds (∼35–110 km) with ∼1–9 km of structural relief cored by Archean and Paleoproterozoic metamorphic and igneous basement rocks. The fold belt accommodated ≥11 km of northwest-southeast shortening between the Taihangshan fault, bounding the North China Plain, in the east and the Ordos Basin in the west. Geological mapping in the Xizhoushan, a northeast-southwest–oriented range within the larger Taihangshan mountain belt, reveals two major basement-cored folds: (1) the Xizhou syncline, with an axial trace that extends for ∼100 km and is characterized by a steep to overturned forelimb consistent with a southeast sense of vergence, and (2) the Hutuo River anticline, which exposes Archean–Paleoproterozoic rocks in its core that are unconformably overlain by shallowly dipping (<∼20°) Lower Paleozoic rocks. In the Luliangshan, Mesozoic structures include the Luliang anticline, the largest recognized anticline in the region, the Ningjing syncline, which preserves a complete section of Paleozoic to Upper Jurassic strata, and the Wuzhai anticline; together, these folds are characterized by a wavelength of ∼45–50 km. Shortening in the Taihang-Luliangshan fold belt is estimated to have occurred between ca. 160 Ma and 135 Ma, based on the age of the youngest deformed Upper Jurassic rocks in the Ningjing syncline, previously published low-temperature thermochronology, and regional correlations to better-studied Yanshanian fold belts. The timing of basement-involved deformation in the Taihang-Luliangshan fold belt, which formed >1000 km from the nearest plate margin, corresponds with the termination of arc magmatism along the eastern margin of Asia, implying a potential linkage to the kinematics of the westward-subducting Izanagi (paleo-Pacific) plate.
14
Shahpasandzadeh, Majid, Hemin Koyi und Faramarz Nilfouroushan. „The significance of switch in convergence direction in the Alborz Mountains, northern Iran: Insights from scaled analogue modeling“. Interpretation 5, Nr. 1 (01.02.2017): SD81—SD98. http://dx.doi.org/10.1190/int-2016-0117.1.
Der volle Inhalt der QuelleAnnotation:
The switch in direction of convergence between Central Iran and the Eurasian Plate is believed to have a significant impact on the structural style in the Alborz Mountains, in the north of Iran. To understand the deformation pattern and investigate the influence of the South Caspian Basin kinematics since the middle Miocene on the structural styles and active tectonics of the Alborz Mountains, a series of scaled analogue models were prepared, in which passively layered loose sand simulating the sedimentary units were subjected to orthogonal and subsequently oblique shortening by a rigid indenter. Model results indicate that during the shortening, an arcuate-shaped foreland-vergent imbricate stack forms in front of the indenter. The orthogonal shortening is characterized by a prevailing right-lateral and left-lateral oblique-slip motion in the east and west of the model, respectively. This shift in kinematics contradicts the proposed preneotectonic (orthogonal) model of the Alborz. However, during oblique shortening, model results show that deformation is mainly accommodated by left-lateral transpression within the sand wedge and internal deformation. Oblique shortening is consistently accommodated by continued left-lateral motion on the west-northwest-trending oblique thrusts, whereas the east–west-trending thrusts and the preexisting east-northeast-trending right-lateral oblique thrusts reactivate as left-lateral oblique faults. Precise monitoring of the model surface also illustrates partitioning of shortening into the foreland-vergent left-lateral thrusting in the south and hinterland-vergent back thrusting in the north. These model results are generally consistent with field observations and GPS data of structure and kinematics of the Alborz Mountains.
15
McGroder, Michael F. „Structural geometry and kinematic evolution of the eastern Cascades foldbelt, Washington and British Columbia“. Canadian Journal of Earth Sciences 26, Nr. 8 (01.08.1989): 1586–602. http://dx.doi.org/10.1139/e89-135.
Der volle Inhalt der QuelleAnnotation:
The eastern Cascades foldbelt is one of three structural domains lying within the complex collision zone between the Insular and Intermontane composite terranes in northern Washington and southern British Columbia. The foldbelt resides between the high-grade metamorphic backbone of the Cascade orogen on the west and rocks of the composite Intermontane terrane to the east. It encompasses the stratigraphically coherent, basalt-floored Jura–Cretaceous Methow basin as well as more chaotically disposed Permian–Jurassic oceanic rocks of the Hozameen terrane. Methow basin rocks are thought to have been sutured above the oceanic rocks prior to the middle Cretaceous contractional episode described in this report.Based on the analysis presented herein, between ca. 100 and 88 Ma the rocks in the foldbelt underwent shortening in an east-northeast – west-southwest direction by 50 km or more, largely by displacement on the east-vergent Jack Mountain – Chuwanten thrust system. The early stages of contraction occurred by the process of tectonic wedging, whereby rocks of the Hozameen terrane and western Methow basin translated eastward by delaminating eastern Methow basin strata along west-vergent thrusts. In later stages of shortening, the tectonic wedge became inactive and was carried piggyback atop the east-vergent Cascade Crest and Chuwanten faults.Presently available geochronologic data indicate overlap in the time periods during which eastern and western Cascades foldbelts were deforming and the Cascade metamorphic core was undergoing amphibolite-facies regional metamorphism. Therefore, contraction of rocks in the eastern foldbelt was an important product of the middle Cretaceous orogeny in the Cascades and must be considered in any regional tectonic model for orogenesis. The eastern foldbelt clearly accommodated substantially less shortening than the western foldbelt and is herein proposed to be a backthrust system in the rear of the predominantly west-vergent Cascade orogen.
16
DENG, BIN, LEI JIANG, GAOPING ZHAO, RUI HUANG, YUANBO WANG und SHUGEN LIU. „Insights into the velocity-dependent geometry and internal strain in accretionary wedges from analogue models“. Geological Magazine 155, Nr. 5 (25.01.2017): 1089–104. http://dx.doi.org/10.1017/s0016756816001266.
Der volle Inhalt der QuelleAnnotation:
AbstractAlthough the brittle material in analogue models is characterized by a linear Navier-Coulomb behaviour and rate-independent deformation, the geometry and style of deformation in accretionary wedges is sensitive to shortening velocity. In this study we have constructed a series of analogue models with various shortening velocities in order to study the influence of shortening velocity on the geometry and kinematics of accretionary wedges. Model results illustrate how shortening velocity has an important influence on the geometry and kinematics of the resulting wedge. In general, for models having similar bulk shortening, the accretionary wedges with higher velocities of shortening are roughly steeper, higher and longer, as well as having larger critical wedge angles and height. It accommodates a number of foreland-vergent thrusts, larger fault spacing and displacement rates than those of low- to medium-velocity shortening, which indicates a weak velocity-dependence in geometry of the wedge. Moreover, models with a high velocity of shortening undergo larger amounts of volumetric strain and total layer-parallel shortening than models with low- to medium-velocity shortening. The former accommodate a greater development of back thrusts and asymmetric structures; a backwards-to-forwards style of wedge growth therefore occurs in the frontal zone under high-velocity shortening.
17
Habel, Tania, Martine Simoes, Robin Lacassin, Daniel Carrizo und German Aguilar. „A contribution to the quantification of crustal shortening and kinematics of deformation across the Western Andes ( ∼ 20–22° S)“. Solid Earth 14, Nr. 1 (06.01.2023): 17–42. http://dx.doi.org/10.5194/se-14-17-2023.
Der volle Inhalt der QuelleAnnotation:
Abstract. The Andes are an emblematic active Cordilleran orogen. Mountain building in the Central Andes (∼20∘ S) started by the Late Cretaceous to early Cenozoic along the subduction margin and propagated eastward. In general, the structures sustaining the uplift of the western flank of the Andes are dismissed, and their contribution to mountain building remains poorly constrained. Here, we focus on two sites along the Western Andes at ∼20–22∘ S in the Atacama desert, where structures are well exposed. We combine mapping from high-resolution satellite images with field observations and numerical trishear forward modeling to provide quantitative constraints on the kinematic evolution of the investigated field sites. When upscaling our local field interpretations to the regional scale, we identify two main structures: (1) the Andean Basement Thrust, a west-vergent thrust system placing Andean Paleozoic basement over Mesozoic strata, and (2) a series of west-vergent thrusts pertaining to the West Andean Thrust System, deforming primarily Mesozoic units. From our interpreted sections, we estimate that both structures together accommodate at least ∼6–9 km of shortening across the sole investigated ∼7–17 km wide field sites. This multi-kilometric shortening represents only a fraction of the total shortening accommodated across the whole Western Andes. The timing of the main deformation recorded in the folded Mesozoic series can be bracketed between ∼68 and ∼29 Ma – and possibly between ∼68 and ∼44 Ma – from dated deformed geological layers, with a subsequent significant slowing-down of shortening rates. Even though the structures forming the Western Andes only absorbed a small fraction of the total shortening across the whole orogen, their contribution was relatively significant at the earliest stages of Andean mountain building before deformation proceeded eastward.
18
Csontos, László, István Dunkl, Gábor Vakarcs und Abid H. Abbaso. „Transversal folding in Himalaya foothill ranges“. Földtani Közlöny 149, Nr. 3 (29.09.2019): 255. http://dx.doi.org/10.23928/foldt.kozl.2019.149.3.255.
Der volle Inhalt der QuelleAnnotation:
The Himalayan foreland in N Pakistan, dissected by Main Frontal Thrust (MFT) and Main Boundary Thrust (MBT) contains spectacular salients and syntaxes. The lateral (N-S) boundaries between these salients and syntaxes around Kalabagh city and east-southeast of Islamabad were believed to host deep-seated lateral ramps with strike slip movements. However, seismic data in these two sectors suggest that there are N-S trending folds and locally east- or west-vergent thrusts that affect the Paleozoic-Paleogene cover of the Indian shield, as well as the Miocene-Pliocene molasse sediments. The proposed lateral ramps cannot be followed on the seismic and on maps either; instead, both maps and seismic data suggest folding, often on a regional scale of harder Paleo-Mesozoic-Paleogene and softer Oligo-Miocene-Pilo-Pleistocene cover. The NE corner of Surghar range is proposed to be formed of relaying thrust sheets with emergent heads composed of Paleozoic-Paleogene and its slightly detached Miocene molasse. These relaying imbricates are taken in a southward flexure generated by a major right lateral shear of a wide zone, where transpressive Riedel shears, en echelon anticlines and southwards flexed earlier thrust faults are the main elements (but a single, through-going Kalabagh fault is missing). The generation of mapped N-S trending folds and east-vergent thrusts preceded the formation of the wide shear zone and southwards flexing.Hazara syntaxis is interpreted as a major antiform that re-folded MBT and Panjal thrust around Oligo-Miocene molasse, itself forming an antiform (BOSSART ET AL. 1988). In our model we propose that the west-vergent Balakot thrust and deeper blind thrusts are in the core of this antiform. In the southern continuation we propose that folds in Miocene molasse continue from eastern Potwar region to western Kashmir and there appears no major break. These structures are also re-folded in a major antiform with N-S axial trend. Map analysis also suggests that N-S trending folds bending earlier main thrusts are occurring in a wide area south of the Indus-Tsangpo suture.Several independent geological and geophysical observations including mapping, seismic analysis, earlier measurements of strain axes and of paleomagnetic declinations suggest that the salients and syntaxes may have been much more linear in the past (although a total linearity is not realistic). It is proposed that the present-day undulating pattern may have been generated by N-S trending folds due to general (and episodic) E-W shortening. If the main fault zones were more linear, the relay pattern along their segments suggests a left lateral shear component along MBT and a mixed, locally left, locally right lateral component along MFT. Earlier (ZEITLER 1985) and now provided low temperature thermochronological ages strongly suggest a rather general episode of E-W shortening between 4-5 Ma for the whole northern Indian margin. However, there should have been original transversal dome formation as early as Oligocene (DIPIETRO ET AL. 2008). It is also clear that longer N-S shortening and shorter E-W shortening episodes should alternate eventually in a very short time frame, since earthquake focal mechanisms (LISA AND KHWAJA 2004, BURG ET AL. 2005) suggest the coexistence of E-W compression and NW-SE compression in Potwar.There are several potential explanations for generating E-W shortening and related structures in a general N-S shortening regime. Possibilities range from fault terminations of thrust faults at high angles in a particular zone (TREOLAR ET AL. 1992) to en echelon folding along a major right lateral E-W fault zone. However, we speculate that E-W shortening could be much more general, suggesting a mechanism that affects the whole of Indian plate. Possibly the best explanation is given by analogue models (REPLUMAZ ET AL. 2012) proposing major, slightly convergent confining boundaries. If applied to the northwards advance of India, the northwards converging boundaries generate secondary E-W shortening and east-or west-vergent orogens parallel to these boundaries.
19
Agard, Philippe, Laurent Jolivet und Bruno Goffe. „Tectonometamorphic evolution of the Schistes Lustres Complex; implications for the exhumation of HP and UHP rocks in the Western Alps“. Bulletin de la Société Géologique de France 172, Nr. 5 (01.09.2001): 617–36. http://dx.doi.org/10.2113/172.5.617.
Der volle Inhalt der QuelleAnnotation:
Abstract We present new structural and metamorphic data on the Schistes Lustres complex which occupies a central position in the western Alps between the external LP and the internal UHP domains (e.g., the Dora Maira massif). Metamorphic conditions are shown to increase progressively from west to east from ca. 12-13 kbar/300-350 degrees C to 20-21 kbar/450-500 degrees C close to the Dora Maira massif. Two distinct exhumation episodes are recognized: (1) A pervasive east-vergent ductile D2 event, with a large component of vertical shortening, took place under low blueschist-facies to greenschist-facies conditions. This event is responsible for most of the exhumation of the Schistes Lustres complex as well as for the preservation of carpholite occurrences at its front, and took place during the period 50-40 Ma. (2) A west-vergent ductile-to-brittle, highly non-coaxial, extensional D3 event subsequently developed, with a deformation intensity decreasing from east to west. This event took place at subgreenschist-facies conditions and is coeval with (and probably derives from) the west-vergent greenschist deformation taking place in the Dora Maira massif and other internal domains by ca. 40-35 Ma.
20
Kufrasa, Mateusz, und Piotr Krzywiec. „Impact of mechanical stratification on the structural style of the Lublin Basin, SE Poland: results of seismic interpretation and implications for quantification of deformation within the frontal parts of thin-skinned fold-and-thrust belts“. International Journal of Earth Sciences 111, Nr. 2 (30.11.2021): 659–73. http://dx.doi.org/10.1007/s00531-021-02140-7.
Der volle Inhalt der QuelleAnnotation:
AbstractWe demonstrate how lithological and mechanical stratification of Ediacaran–Carboniferous sedimentary package governs strain partitioning in the Lublin Basin (LB) which was incorporated in the marginal portion of the Variscan fold-and-thrust belt. Based on the geometry of seismic reflectors, the pre-Permian–Mesozoic sedimentary sequence was subdivided into two structural complexes differing in structural style. The lower one reveals forelandward-vergent imbrication, while the upper one comprises fold train, second-order deformations, and multiple local detachments. Lithological composition of the upper structural complex controlled geometry, kinematics, and position of compressional deformations in stratigraphic profile. System of foreland-vergent thrusts which links lower and upper detachment developed due to efficiency of simple shear operating in heterogeneous clastic-carbonate-evaporitic strata of the Lower–Upper Devonian age. Internal homogeneity promoted the formation of conjugate sets of thrusts in Silurian shales and Upper Devonian limestones. Structural seismic interpretation combined with sequential restoration revealed localised thickening of Devonian strata and up to 5% difference in length of Devonian horizons. This mismatch is interpreted as a manifestation of distributed shortening, including layer-parallel shortening (LPS), which operated before or synchronously to the initiation of folding. The amount of distributed strain is comparable with numbers obtained in external parts of other fold-and-thrust belts. The outcomes derived from this study may act as a benchmark for studying variability in a structural style of multilayered sequences which were incorporated in the external portion of other fold-and-thrust belts.
21
El Ghali, Abdessalem, Claude Bobier und Noureddine Ben Ayed. „Significance of the E-W fault system in the geodynamic evolution of the Tunisian Alpine Chain foreland. Example of the Sbiba-Cherichira fault system in Central Tunisia“. Bulletin de la Société Géologique de France 174, Nr. 4 (01.07.2003): 373–81. http://dx.doi.org/10.2113/174.4.373.
Der volle Inhalt der QuelleAnnotation:
Abstract The recent sedimentary basins in Central Tunisia correspond to a set of depocenters with complex geometry which are bounded by E-W, N070 and N-S brittle structures. These bordering faults, active during Eocene and Cretaceous times, have been rejuvenated at the end of the Neogene and during Quaternary in a relay pattern system associated with compressive and extensive deformations according to the alternance of extension and compression phases (Tortonian Atlasic Phase of compression, post tectonic top Miocene-early Pleistocene extension associated to the rifting of the Tyrrhenian Basin, and Pleistocene Phase of compression). These tectonic regime changes involve subsidence inversions. Moreover, the neotectonic study carried out along the strike-slip faults corridories and their associated structures enable us : – to precise the timing of the tectonic deformations ; – to establish tectono-sedimentary relationships of Mio-Plio-Quaternary age. Introduction : geodynamical context and objectives of the study. – In Central Tunisia as in the whole Maghreb [Piqué et al., 1998 ; Piqué et al., 2002], the Mesozoic and Cenozoic evolution of sedimentary basins is largely controlled by tectonic heredity due to rejuvenation of basement discontinuities. In fact, previous studies have shown that the normal kinematics activity of The Sbiba-Cherichira fault has governed the opening and the distribution of the Cretaceous and the Eocene basins evolving in a globally extensive tectonic regime [Boltenhagen, 1981 ; El Ghali, 1993]. These old tectonics is proven, also, by the interpretation of NNE-SSW seismic profiles through this collapsed zone [Ben Ayed, 1986, fig. 3] and who reveal that subsidence had been active during the Lower Cretaceous and continued up to the Albian. In the late Miocene and early Quaternary, following the Langhian collision of Sardinia against the Northern Platform of Tunisia [Cohen et al., 1980], the Atlasic and Villafranchian Phases of compression are the most important. They were responsible for the formation of important N040° to N070°E Atlasic folds , N040° to N090°E thrusts , the opening of N120° to N150° E basins parallel to the shortening axis and E-W strike slip fault [Burollet, 1956 ; Ben Ayed, 1986]. In this paper, we present and discuss results of research carried out in the Sbiba-Cherichira area. This research combines interpretation of sedimentological observations and microtectonic or structural field studies [El Ghali et Batik, 1992] carried out along and near the Sbiba-Cherichira faults system, which corresponds to two separated master faults (fig. 2): – the « Southern Sbiba Fault » developed to the west with a direction N090°E which acted as is the southern boundary of the “Sbiba Trough” subsident area as early as the Albian (fig. 3) ; – the “Cherichira Fault” developed to the north-east with a direction N070°E. These faults are connected by the N040°E Labaied-Trozza Fault. Tortonian tectonic activity. – During Tortonian compression (orientation of the shortening axis N120°to N140°E) [Burollet, 1956 ; Ben Ayed, 1986 ; Philip et al., 1986 ; Martinez et al., 1990], many transformations were induced in the studied area (fig. 4a). In fact, the E-W faults of Sbiba and the N070 to N90°E faults of Cherichira, disposed in left relay, were reactivated as dextral strike-slip faults inducing simultaneous distensive deformations (normal faults, grabens, half-grabens…) and compressive ones (folds, reverse faults, overlappings….) localised at fracturing extremity [El Ghali, 1993]. Compressive structures. – The brittle structures are associated with ductile deformations of two types : *The first one corresponds to en echelon folds including : – to the south of the E-W Sbiba Fault, in J. Tiouacha and J. Labaied, Eocene and Neogene strata which are involved in hectometric folds with a N040° to N060°E axial direction (fig. 4a) and an axial westward dip changing from 05° to 60°E ; – to the west of the J. Rebeiba fault, Lutetian and Oligocene to Lower Miocene Strata which are affected by hectometric folds with a N070° to N090°E direction (fig. 4a) and an axial westward dip, changing from 05°to 20°E [El Ghali, 1993]. All these folds are abruptly cut up by the master faults and they can be interpreted as en echelon fault propagation folds. * The second includes plurikilometric folds parallel to the strike slip faults : – the E-W anticline of J. Labaied due to the transpression responsible for reactivation of the southern Sbiba Fault with a dextral strike slip component (fig. 4a); – the N040°E anticline of J. Trozza and the N070°E anticline of J. Cherichira respectively associated with the Trozza-Labaied fault and the Cherichira fault. Because of their orientation approximatively normal to the shortening axis, these faults are reactivated reversed faults giving fault-bend folds [Suppe, 1983] thrusted to the SE with a decollement level in Triassic evaporites extruded along the fault between J. M’Rhila and J. Cherichira (fig. 4a). Distensive structures : syntectonic depocenters associated to dextral strike-slip faults. – The dextral strike-slip faults extremities develop as normal faults N140 to N160°E in the dampening zone (fig. 4a). The east and west endings of Sbiba strike slip fault are two distensive extremities the opening mecanism of which is compatible with that of a megasplit basin at a strike-slip extremity [Harding, 1973 ; Odonne, 1981 ; Granier, 1985 ; Faugère et al., 1986…]. Top Miocene to early Pleistocene tectonic activity. – During upper top Miocene and early Pleistocene times, the Sbiba Trough was characterized by a subsidence more important than in any other place in Tunisia and was filled by continental deposits of the Segui Formation (conglomerates, sands, black clays and lacustrine limestones, fig. 5). Subsidence (500m near Haffouz, 3000m in Sbiba Trough, fig. 4b) was controlled by the activity of synsedimentary normal and strike-slip faults, forming small grabens, monoclinal grabens N090° to N130°E trending often cut by the Sbiba Fault (figs. 4b and 7). This extension can be considered as a post-tectonic extension relative to the Atlasic phase of compression, the orientation of the tensile axis being the same. Pleistocene tectonic activity. – In Central Tunisia, a NNW-SSE compressive phase, intervening in early Quaternary, has been demonstrated out [Burollet, 1956 ; Ben Ayed, 1986 ; Philip et al., 1986]. This “Villafranchian phase” follows distensive strike-slip tectonics of top Miocene Lowermost Pleistocene [El Ghali, 1993] and involves subsidence inversion. This phase is manifested by reverse dextral strike-slip faults on E-W segments (Sbiba and Ain Grab faults, fig. 4c) and by SE vergence overlappings on the NE-SW segments of J. Trozza (fig. 6) and N070°E ones of Cherichira (fig. 8). In other places the top Miocene-early Pleistocene deposits of the Segui Formation are folded, producing in the Sbiba basin N070° to N090°E en echelon folds (fig. 4c) with westward or eastward axial dipping between 05° and 15°. In Jebel Ain Grab area, the folds are overturned and locally thrusted northwards producing a morphostructural dam. This latter limits to the south a sag filled with fluviatile and lacustrine deposits (fig. 9). Comparison with neighbouring regions and conclusions. – The Sbiba-Cherichira faults system correspond to an en-echelon strike slip fault inherited from a basement discontinuity. It recorded most of the main tectonic processes which affected the southern margin of the Tethys. In Central Tunisia, this faults system constitutes an evolution model of one of the major scars which affects the sedimentary cover and controls basins distribution and evolution since the Cretaceous to the Quaternary. * The Tortonian compressional episode corresponding to the Compression Atlasic Phase described from the Rif in Morocco to northern Tunisia [Viguier et al., 1980 ; Philip, 1983 ; Ben Ayed, 1986 ; Morel, 1989 ; Aite, 1995 ; Piqué et al., 2002]. The N120° to N130°E orientation of the shortening axis induced the most important transpression which has triggered the rejuvenation of the Sbiba-Cherichira system as a very active fault driving halokinesis of Triassic evaporites and large development of brittle and folded structures associated to wrench faulting activity as in the eastern platform of Tunisia (fig. 10) [Ellouz, 1984]. * During the top Miocene-early Pleistocene postectonic extension, the rejuvenation of older faults generated a multidirectional extension near the Sbiba-Cherichira faults system as in northern Tunisian platform [Tricart et al., 1994] or in the north-eastern platform and in the strait of Sicily [Bobier et Martin, 1976 ; Ellouz, 1984]. In the Sbiba and Haffouz basins, the multidirectional extension is responsible for the development, along the N070°E dextral strike slip faults and N120°E left lateral strike slip faults, of depocenters for the Segui Formation which is superimposed to Middle Cretaceous subident areas [El Ghali, 1993]. * The Upper-Pleistocene episode which corresponds to the Villafranchian Phase with a N170° to N180°E shortening axis in agreement with the convergence of the European and African Plate and very well documented from the southern margin of Grande Kabilie [Aite, 1995] to northern Tunisia [Ben Ayed, 1986]. Near Sbiba it induced formation of folds, thrusts or reversed faults forming morphostructural dams in which fluvio-lacustrine deposits are accumulated.
22
Gao, Dengliang, Thomas Donahoe, Taizhong Duan und Peter Sullivan. „Acadian hinterland-vergent detachment structures in the southwestern Appalachian Plateau: Implications for the Marcellus Shale gas exploration and production“. Interpretation 6, Nr. 4 (01.11.2018): SN85—SN99. http://dx.doi.org/10.1190/int-2018-0036.1.
Der volle Inhalt der QuelleAnnotation:
Three-dimensional seismic data in southwestern Pennsylvania in the Appalachian Plateau demonstrate that the structural style in the Devonian section is dominated by east-vergent folds and reverse faults, which contrasts with that in the Valley and Ridge Province where west-vergent folds and thrusts dominate. Vertical (cross-stratal) variations in fold curvature and fault throw indicate that the intensity of shortening increases from the Salina (Upper Silurian) to the Onondaga (Middle Devonian) and then decreases from the Onondaga to the Elk (Upper Devonian). Lateral (along-stratal) variations in fold curvature and fault throw indicate that the folds and faults tend to propagate in the cross-strike and along-strike directions. Isochron thickness below the Onondaga increases on the anticlinal, up-thrown side of the faults, whereas isochron thickness above the Onondaga increases to the synclinal, down-thrown side of the faults. In concert with seismic structure and isochron thickness, seismic facies see vertical and lateral variations that are spatially and temporally related to folds and faults. Four years of gas production data from the Middle Devonian Marcellus Shale show that the gas productivity drops near the regional reverse faults, whereas regional drilling patterns from a broader perspective of the Plateau reveal operational gaps near major cross-regional wrench faults. These observations are indicative of the dynamic interplay among hinterland-vergent detachment deformation, syntectonic sedimentation, and shale gas preservation during the Acadian (Middle Devonian–Early Mississippian).
23
Manatschal, Gianreto, David Ulfbeck und Jeroen van Gool. „Change from thrusting to syncollisional extension at a mid-crustal level: an example from the Palaeoproterozoic Nagssugtoqidian Orogen (West Greenland)“. Canadian Journal of Earth Sciences 35, Nr. 7 (01.07.1998): 802–19. http://dx.doi.org/10.1139/e98-030.
Der volle Inhalt der QuelleAnnotation:
The Palaeoproterozoic Nagssugtoqidian Orogen in West Greenland represents a mid- to deep-crustal section through a collisional orogen with a complex intrusive, tectonic, and metamorphic history. In the northeastern central part of the orogen, in the Ussuit area, Palaeoproterozoic intrusive and supracrustal rocks are sandwiched between slices of Archaean rocks forming a stack of lithotectonic units. Juxtaposition of these units occurred during west- to northwest-vergent thrusting along ductile shear zones (= D1) associated with a foliation formed at upper amphibolite facies conditions. D1 structures were folded (= FA) and then reactivated and locally omitted by localized east- to east-northeast-vergent extensional ductile shear zones (= D2) at near-peak metamorphic conditions. Shallowly east-plunging, transport-parallel upright folds (= FB) affect but are also truncated by D2 extensional shear zones, suggesting an interplay between FB folding and D2 shearing, compatible with a scenario of overall shortening perpendicular to fold axial surface during simultaneous extension parallel to fold axes. Consequently, the structures preserved in the Ussuit area document a deformation history which results from a change from thrusting to syncollisional extension occurring in mid- to lower crustal levels at peak metamorphic conditions.
24
Şengör, A. M. Celâl. „The structural evolution of the Albula Pass region, Graubünden, eastern Switzerland: the origin of the various vergences in the structure of the Alps“. Canadian Journal of Earth Sciences 53, Nr. 11 (November 2016): 1279–311. http://dx.doi.org/10.1139/cjes-2016-0020.
Der volle Inhalt der QuelleAnnotation:
The Albula Pass region lies between the Lower Austroalpine Err Nappe and the Middle Austroalpine Silvretta Nappe. They will be treated here as the frame of the non- to gently metamorphic sedimentary units between the two during the Alpide times. Sedimentation started on a metamorphic Hercynian basement during the latest Carboniferous(?) and continued into the Permian. Then a sequence from the Alpine Buntsandstein to the medial Jurassic to early Cretaceous Aptychenkalk (=Maiolica) and radiolarites were deposited in an environment of rifting and subsidence. The succeeding Palombini clastics were laid down after the Aptychenkalk and mark the onset of shortening in the Alpine realm. The initial structures that formed were at least two north-dipping normal faults which formed before the deposition of the Jurassic sedimentary rocks. When shortening set in, the first structure that came into being was the south-vergent Elalbula Nappe, bending the normal faults into close antiforms. It became further dismembered into two pieces creating parts of the future Ela and Albula nappes in the Albula region. This motion was later reversed, when the entire ensemble became bulldozed by the immense body of the Silvretta Nappe along numerous, closely spaced thrust faults, some of which only very locally followed horizontal bits of the old normal faults, but in principle they determined their own course. No evidence for westerly motion could be identified, although microstructures in the structural fabric were not studied. The reason for this may be the pre-orogenic fabric in the bounding tectonic units.
25
Khalili, Marzieh, und Yildirim Dilek. „The 9 April 2013 Kaki earthquake (Mw 6.3) in SW Iran occurred along a blind backthrust in the Fars geological province of the Zagros Fold and Thrust Belt“. Geological Society, London, Special Publications 501, Nr. 1 (2021): 71–85. http://dx.doi.org/10.1144/sp501-2021-20.
Der volle Inhalt der QuelleAnnotation:
AbstractThe Zagros Fold and Thrust Belt (ZFTB) in southern Iran is a seismically active tectonic zone, where SW-vergent thrust faults and NW–SE- and NE–SW-oriented strike-slip fault systems accommodate crustal shortening, resulting from the active Arabia–Eurasia collision. The majority of earthquakes in Iran occur within the ZFTB, posing a major hazard for society. The 9 April 2013 Kaki Earthquake (Mw 6.3) in the southern part of the ZFTB took place along a fault that was previously unknown regarding its surface expression, geometry and kinematics. We have used surface–subsurface distributions and focal mechanism solutions of the Kaki Earthquake aftershocks to characterize the fault system responsible for the quake. Our results indicate that it was a NE-vergent thrust fault with a minor dextral component that slipped c. 7–17 km at depth, causing the Kaki Earthquake. There were no surface ruptures, although some surface fissures developed in fluvial terraces during the main shock. We interpret this fault as a blind backthrust, which probably represents a reactivated Mesozoic basement fault emanating from the Zagros detachment surface. An upper shallow décollement zone within the Miocene Gachsaran Salt facilitated its upward propagation on the back-limb of an overturned syncline.
26
Reusch, Douglas N., und Cees R. van Staal. „The Dog Bay – Liberty Line and its significance for Silurian tectonics of the northern Appalachian orogen1This article is one of a series of papers published in this CJES Special Issue: In honour of Ward Neale on the theme of Appalachian and Grenvillian geology.2Geological Survey of Canada Contribution 20100257.“ Canadian Journal of Earth Sciences 49, Nr. 1 (Januar 2012): 239–58. http://dx.doi.org/10.1139/e11-024.
Der volle Inhalt der QuelleAnnotation:
The Dog Bay Line, a Silurian suture key to deciphering Appalachian accretionary history, was first recognized in Newfoundland. It marks where the Ordovician Tetagouch–Exploits ensimatic back-arc basin (TEB), which had opened within the leading peri-Gondwanan Gander terrane, finally closed. Here, we extrapolate this suture into New England, placing it between the Liberty–Orrington–Miramichi inliers (LOM) and the Merrimack–Fredericton trough (MFT). Southeastward, marine strata of the MFT overlie the TEB passive margin, exposed in the Ganderian St. Croix block, and display southeast-vergent structures transected by Acadian cleavage. They structurally underlie southeast-vergent thrusts at the base of the LOM. Northwestward, the LOM, Central Maine – Matapedia trough (CMMT), and Lower Silurian igneous rocks record elements of the upper plate trench–arc system, respectively, a subduction complex, forearc basin, and arc. The CMMT forearc received detritus both from the northwesterly arc region, and also from the Early Silurian-exhumed subduction complex. Minimal contrast in Silurian turbidites near the line may be due to sediment bypassing the subduction complex, and (or) a common provenance when the complex emerged above sea level. Salinic unconformities in the upper plate (arc–trench) reflect episodes of shortening, within an overall extensional setting that resulted in thinned, weakened lithosphere, and also final uplift accompanying latest Silurian slab breakoff. Silurian strata of the Coastal Volcanic Belt document a separate arc system built on Ganderia’s trailing edge, where northwest-directed subduction of a narrow seaway led to latest Silurian collision with buoyant, strong lithosphere of Avalonia’s passive margin, and the onset of Acadian typically dextral-oblique, northwest-vergent deformation.
27
Sanborn-Barrie, M., W. J. Davis, R. G. Berman, N. Rayner, T. Skulski und H. Sandeman. „Neoarchean continental crust formation and Paleoproterozoic deformation of the central Rae craton, Committee Bay belt, Nunavut“. Canadian Journal of Earth Sciences 51, Nr. 6 (Juni 2014): 635–67. http://dx.doi.org/10.1139/cjes-2014-0010.
Der volle Inhalt der QuelleAnnotation:
Integrated mapping, structural analysis, and U–Pb geochronology of the Committee Bay area, Nunavut, establish a record of Neoarchean crustal growth followed by penetrative Paleoproterozoic deformation. Supracrustal rocks include a lower ca. 2.73 Ga mafic–ultramafic volcanic-dominated sequence, a middle, economically significant 2.71 Ga intermediate volcanic-bearing sequence with intercalated sulphidized, gold-bearing iron formation, and an upper <2.69 Ga clastic ± komatiite–quartzite sequence. Following an 80 million year hiatus, this succession was intruded by voluminous ca. 2.61–2.57 Ga granodiorite–tonalite–granite ± diorite, which do not appear to have thermally or tectonically affected the supracrustal belt. Instead, three generations of structures record polyphase Paleoproterozoic deformation of the region. D1 structures are consistent with a doubly vergent structural fan developed at ca. 2.35 Ga in response to the Arrowsmith orogeny that affected the western Rae margin. Penetrative D2 structures dominate the map pattern and include northeast-trending, southeast-dipping folds and fabrics within which gold is localized. The general southeast dips of S2 and inclined, northwest-vergent attitude of F2 reflect northwest-directed shortening at 1.84–1.82 Ga. The absence of syn-D2 plutonic rocks in the west and central Committee Bay belt support amphibolite-facies metamorphism as a response to crustal thickening, which, in turn, led to syn-D2 crustal melting in the east. Regionally extensive upright to northwest-vergent D2 structures and associated ca. 1.85–1.82 Ga tectonometamorphism across the Rae craton are attributed to an early stage of the Hudsonian orogeny involving microcontinent collision(s) with its southeastern margin. D3 folds and dextral shearing at ca. 1780 Ma accommodated localized, late-stage compressional strain during final amalgamation of Laurentia.
28
McDonough, Michael R., Vicki J. McNicoll, Ernst M. Schetselaar und Timothy W. Grover. „Geochronological and kinematic constraints on crustal shortening and escape in a two-sided oblique-slip collisional and magmatic orogen, Paleoproterozoic Taltson magmatic zone, northeastern Alberta“. Canadian Journal of Earth Sciences 37, Nr. 11 (01.11.2000): 1549–73. http://dx.doi.org/10.1139/e00-089.
Der volle Inhalt der QuelleAnnotation:
The southern Taltson magmatic zone (south of 60°N) is a composite continental magmatic arc and collisional orogen resulting from the convergence of the Buffalo Head terrane with the Archean Churchill craton. Taltson basement (ca. 3.23.0 Ga and 2.42.14 Ga) and Rutledge River supracrustal gneisses (2.132.09 Ga) were intruded by voluminous I- and S-type magmatic rocks between 1.99 and 1.92 Ga. Taltson magmatic zone was deformed by three ductile shear zones: Leland Lakes, Charles Lake, and Andrew Lake, exhibiting both strike- and dip-lineated mylonitic domains. Kinematic data for shear zones are reported at microscopic, mesoscopic, and macroscopic (remotely sensed data) scale. We present field and UPb isotopic data (zircon and monazite) for magmatic and metamorphic rocks that constrain the timing of granulite to upper amphibolite-grade shearing in the Leland Lakes and Charles Lake (formerly Allan) shear zones to ca. 19381934 Ma. Foreland (easterly) vergent thrusting on the Andrew Lake shear zone is ca. 1932 Ma. Taltson shear zones were overprinted by widespread amphibolite- to greenschist-grade shearing, which is constrained by published 40Ar39Ar and KAr dates on hornblende and muscovite to between ca. 1900 and 1800 Ma. We propose a crustal architecture, resembling a crustal-scale asymmetric flower structure, in which the Charles Lakes shear zone formed the fundamental shear zone of a middle to lower crustal sinistral transpression system that accommodated southward escape of crust in the upper plate of an oblique continental subductioncollision zone, with shortening partitioned into synchronous outwardly vergent thrust systems to the east and west of the main shear zone.
29
Vitale, Stefano, Ernesto Paolo Prinzi, Maria Monda, Francesco D’Assisi Tramparulo und Sabatino Ciarcia. „Structural and Stratigraphic Setting of Campagna and Giffoni Tectonic Windows: New Insights on the Orogenic Evolution of the Southern Apennines (Italy)“. Geosciences 10, Nr. 10 (10.10.2020): 405. http://dx.doi.org/10.3390/geosciences10100405.
Der volle Inhalt der QuelleAnnotation:
We present a structural study on the tectonic windows of Giffoni and Campagna, located in the western sector of the southern Apennines (Italy). We analyzed thrusts, folds, and related minor deformation structures. Here, a major in-sequence E-verging thrust fault juxtaposes Meso-Cenozoic successions of the Apennine Platform (Picentini Mts unit) and the Lagonegro-Molise Basin (Frigento unit). However, out-of-sequence thrusts duplicated the tectonic pile with the interposition of the upper Miocene wedge-top basin deposits of the Castelvetere Group. We reconstructed the orogenic evolution of these two tectonic windows, including five deformation phases. The first (D1) was related to the in-sequence thrusting with minor thrusts and folds, widespread both in the footwall and the hanging wall. A subsequent extension (D2) has formed normal faults crosscutting the D1 thrusts and folds. All structures were subsequently affected by two shortening stages (D3 and D4), which also deformed the upper Miocene wedge top basin deposits of the Castelvetere Group. We interpreted the D3–D4 structures as related to an out-of-sequence thrust system defined by a main frontal E-verging thrust and lateral ramps characterized by N and S vergences. Low-angle normal faults were formed in the hanging wall of the major thrusts. Out-of-sequence thrusts are observed in the whole southern Apennines, recording a crustal shortening event that occurred in the late Messinian–early Pliocene. Finally, we suggest that the two tectonic windows are the result of the formation of an E–W trending regional antiform, associated with a late S-verging back-thrust, that has been eroded and crosscut by normal faults (D5) in the Early Pleistocene.
30
Palotai, Márton, und László Csontos. „Strike-slip reactivation of a Paleogene to Miocene fold and thrust belt along the central part of the Mid-Hungarian Shear Zone“. Geologica Carpathica 61, Nr. 6 (01.12.2010): 483–93. http://dx.doi.org/10.2478/v10096-010-0030-3.
Der volle Inhalt der QuelleAnnotation:
Strike-slip reactivation of a Paleogene to Miocene fold and thrust belt along the central part of the Mid-Hungarian Shear ZoneRecently shot 3D seismic data allowed for a detailed interpretation, aimed at the tectonic evolution of the central part of the Mid-Hungarian Shear Zone (MHZ). The MHZ acted as a NW vergent fold and thrust belt in the Late Oligocene. The intensity of shortening increased westwards, causing clockwise rotation of the western regions, relatively to the mildly deformed eastern areas. Blind thrusting and related folding in the MHZ continued in the Early Miocene. Thrusting and gentle folding in the MHZ partly continued in the earliest Pannonian, and was followed by sinistral movements in the whole MHZ, with maximal displacement along the Tóalmás zone. Late Pannonian inversion activated thrusts and generated transpressional movements along the Tóalmás zone.
31
Miller, Robert B., und Scott R. Paterson. „Tectonic implications of syn- and post-emplacement deformation of the Mount Stuart batholith for mid-Cretaceous orogenesis in the North Cascades“. Canadian Journal of Earth Sciences 29, Nr. 3 (01.03.1992): 479–85. http://dx.doi.org/10.1139/e92-041.
Der volle Inhalt der QuelleAnnotation:
The 93–96 Ma Mount Stuart batholith intruded across the boundary between the Northwest Cascades thrust system and the crystalline core of the North Cascades. Although previously considered posttectonic, the northeast margin of the Mount Stuart batholith and its wall rocks have been involved in syn- to post-emplacement, southwest-directed thrusting and folding, and west-northwest stretching. Contraction ended shortly after emplacement, as indicated by high-temperature recrystallization in thrust-related mylonites of the pluton and by geochronological data, whereas west-northwest stretching continued for an unknown period of time. This is the best documented mid-Cretaceous contractional belt in the main part of the crystalline core. The shortening direction and timing are identical to that of southwest-vergent thrusts in the offset continuation of the core in British Columbia. The contractional belt provides a link between thrusting in the Northwest Cascades thrust system and deformation in the crystalline core.
32
VACEK, FRANTIŠEK, und JIŘÍ ŽÁK. „A lifetime of the Variscan orogenic plateau from uplift to collapse as recorded by the Prague Basin, Bohemian Massif“. Geological Magazine 156, Nr. 3 (10.11.2017): 485–509. http://dx.doi.org/10.1017/s0016756817000875.
Der volle Inhalt der QuelleAnnotation:
AbstractThe Ordovician to Middle Devonian Prague Basin, Bohemian Massif, represents the shallowest crust of the Variscan orogen corresponding toc.1–4 km palaeodepth. The basin was inverted and multiply deformed during the Late Devonian to early Carboniferous Variscan orogeny, and its structural inventory provides an intriguing record of complex geodynamic processes that led to growth and collapse of a Tibetan-type orogenic plateau. The northeastern part of the Prague Basin is a simple syncline cross-cut by reverse/thrust faults and represents a doubly vergent compressional fan accommodatingc.10–19 % ~NW–SE shortening, only minor syncline axis-parallel extension and significant crustal thickening. The compressional structures were locally overprinted by vertical shortening, kinematically compatible with ductile normal shear zones that exhumed deep crust in the orogen's interior atc. 346–337 Ma. On a larger scale, the deformation history of the Prague Syncline is consistent with building significant palaeoelevation during Variscan plate convergence. Based on a synthesis of finite deformation parameters observed across the upper crust in the centre of the Bohemian Massif, we argue for a differentiated within-plateau palaeotopography consisting of domains of local thickening alternating with topographic depressions over lateral extrusion zones. The plateau growth, involving such complex three-dimensional internal deformations, was terminated by its collapse driven by multiple interlinked processes including gravity, voluminous magma emplacement and thermal softening in the hinterland, and far-field plate-boundary forces resulting from the relative dextral motion of Gondwana and Laurussia.
33
László, Csontos, Sasvári Ágoston, Pocsai Tamás, Kósa László, Azad T. Salae und Ali Athar. „Structural evolution of the northwestern Zagros, Kurdistan Region, Iraq: Implications on oil migration“. GeoArabia 17, Nr. 2 (01.04.2012): 81–116. http://dx.doi.org/10.2113/geoarabia170281.
Der volle Inhalt der QuelleAnnotation:
ABSTRACT The studied area in Kurdistan Region of Iraq lies across an important topographic/structural boundary between the southern lowlands and the northern, folded and imbricated Zagros Mountains. It also encompasses a prominent change in structural orientation of the northern Zagros, from a general NW-SE “Zagros” to an E-W “Taurus” trend. Geological mapping and structural observations, both in the mountains (Mesozoic–Palaeogene) and in the lowlands (Neogene), led to the following conclusions. (1) The oldest recorded deformation is a layer-parallel shortening, coupled with southwest-vergent shear that was followed by major folding of ca. 10 km wavelength and ca. 1,000 m amplitude. Even the Upper Miocene–Pliocene Bakhtiari Formation has steep to overturned beds in some parts, and synclines preserve syn-tectonic strata of Neogene–Pliocene age. Box folding is associated with crestal collapse, internal thrusting in the core and with formation of systematic joint sets. (2) On the southern limb of the major folds, thrusting of variable offset can be observed. The thrusts on the southern and northern limbs are considered responsible for the major uplift during main folding. (3) En-échelon fold-relay patterns suggest left-lateral shear along the EW-oriented segment and right-lateral shear along the NW-oriented segment. (4) A quick-look qualitative analysis of striated fault planes suggests a variable shortening trend from NE-SW to N-S, and some rare NW-SE shortening all associated with thrust faults. (5) The general structural setting of the area is linked to the north-eastwards to northwards propagation of the Arabian Margin beneath Eurasia. The ca. 30° bend in the mountain chain may be explained by the original shape of the Arabian Margin, or by pre-existing tectonic zones of E-W orientation in the northern part. Several observations suggest that there was no oroclinal bending (i.e. major rotation) of different parts of the chain, but the structures simply molded on their local buttress (almost) according to present orientations. However, a limited amount of rigid-body rotation in the different segments cannot be ruled out. The changing shortening directions generated several structural combinations on both the NW-SE Zagros and the E-W Taurus segments of the arc, many of which are still preserved. (6) Spectacular bitumen seepage in Upper Cretaceous and Palaeocene limestone originates from fractures or geodes of these formations. Many of these bitumen-filled voids are linked to the above-described Late Neogene–Recent shortening-folding process; therefore hydrocarbon migration into these voids is interpreted to be very young. This contradicts earlier ideas about massive Late Cretaceous breaching and bleeding off of hydrocarbons in this region.
34
Di Fiori, Russell V., Sean P. Long, Anne C. Fetrow, Kathryn E. Snell, Joshua W. Bonde und Jeff Vervoort. „Syncontractional deposition of the Cretaceous Newark Canyon Formation, Diamond Mountains, Nevada: Implications for strain partitioning within the U.S. Cordillera“. Geosphere 16, Nr. 2 (06.01.2020): 546–66. http://dx.doi.org/10.1130/ges02168.1.
Der volle Inhalt der QuelleAnnotation:
Abstract The timing of deformation and deposition within syntectonic basins provides critical information for understanding the evolution of strain in mountain belts. In the U.S. Cordillera, contractional deformation was partitioned between the Sevier thrust belt in Utah and several structural provinces in the hinterland in Nevada. One hinterland province, the Central Nevada thrust belt (CNTB), accommodated up to ∼15 km of shortening; however, in most places, this deformation can only be bracketed between Permian and Eocene. Cretaceous deposits of the Newark Canyon Formation (NCF), which are sparsely exposed along the length of the CNTB, offer the opportunity to constrain deformation timing. Here, we present mapping and U-Pb zircon geochronology from the NCF in the Diamond Mountains, which demonstrate deposition of the NCF during proximal CNTB deformation. Deposition of the basal NCF member was under way no earlier than ca. 114 Ma, a tuff in the middle part of the section was deposited at ca. 103 Ma, and the youngest member was deposited no earlier than ca. 99 Ma. Intraformational angular unconformities and abrupt along- and across-strike thickness changes indicate that NCF deposition was related to growth of an east-vergent fault-propagation fold. Clast compositions define unroofing of upper Paleozoic sedimentary rocks, which we interpret as the progressive erosion of an anticline ∼10 km to the west. CNTB deformation was contemporaneous with shortening in the Sevier thrust belt, which defines middle Cretaceous strain partitioning between frontal and interior components of the Cordillera. Strain partitioning may have been promoted by renewed underthrusting during a period of high-flux magmatism.
35
Costa, Mario, Jessica Chicco, Chiara Invernizzi, Simone Teloni und Pietro Paolo Pierantoni. „Plio–Quaternary Structural Evolution of the Outer Sector of the Marche Apennines South of the Conero Promontory, Italy“. Geosciences 11, Nr. 5 (24.04.2021): 184. http://dx.doi.org/10.3390/geosciences11050184.
Der volle Inhalt der QuelleAnnotation:
Some new results and preliminary remarks about the Plio–Quaternary structural and evolutionary characteristics of the outer Marche Apennines south in the Conero promontory are presented in this study. The present analysis is based on several subsurface seismic reflection profiles and well data, kindly provided by ENI S.p.A. and available on the VIDEPI list, together with surface geologic–stratigraphic knowledge of Plio–Quaternary evolution from the literature. Examples of negative vs. positive reactivation of inherited structures in fold and thrust belts are highlighted. Here, we present an example from the external domain of the Marche Apennines, which displays interesting reactivation examples from the subsurface geology explored. The study area shows significant evolutionary differences with respect to the northern sector of the Marche region previously investigated by the same research group. The areal distribution of the main structures changes north and south of the ENE–WSW oriented discontinuity close to the Conero promontory. Based on the old tripartite classification of the Pliocene, the results of this work suggest a strong differential subsidence with extension occurring during the Early Pliocene and principal compressive deformation starting from the Middle Pliocene and decreasing or ceasing during the Quaternary. The main structure in this area is the NNW–SSE Coastal Structure, which is composed of E-vergent shallow thrusts and high-angle deep-seated normal faults underneath. An important right-lateral strike–slip component along this feature is also suggested, which is compatible with the principal NNE–SSW shortening direction. As mentioned, the area is largely characterized by tectonic inversion. Starting from Middle Pliocene, most of the Early Pliocene normal faults became E-vergent thrusts.
36
NATAL’IN, BORIS, und ADALET GIZEM SAY. „Eocene–Oligocene stratigraphy and structural history of the Karaburun area, southwestern Black Sea coast, Turkey: transition from extension to compression“. Geological Magazine 152, Nr. 6 (03.06.2015): 1104–22. http://dx.doi.org/10.1017/s0016756815000229.
Der volle Inhalt der QuelleAnnotation:
AbstractThe stratigraphic succession exposed in the Karaburun area (southern Black Sea coast, NW Turkey) records multiple changes in depositional and tectonic settings during Cenozoic times. It starts with the Middle–Upper Eocene Soğucak Formation of reef limestone that across a normal fault, omitting the lower part of the Lower Oligocene Ceylan Formation (deep-marine shale unit), abuts the upper part of the Ceylan Formation that is made up of two facies: (1) shallow-marine sandstone and (2) shallow-marine limestone units containing horizons of submarine slumps. Both facies are unconformably overlain by the fluvial Upper Miocene Çukurçeşme Formation. The tectonic record includes: (1) latest Eocene – Early Oligocene NE–SW extension, (2) Early Oligocene NE–SW shortening and (3) Late Miocene NW–NE extension. The earliest normal faults cutting the Soğucak and the lower part of the Ceylan formations are associated with clastic dykes injected into the deep-marine shale. These structures suggest a disruption of the Eocene carbonate platform and are also known in the neighbouring Thrace Basin. The following NE–SW shortening created the NE-vergent Karaburun Thrust that is synchronous with the shallowing and inversion of the Ceylan Basin. Rotation of the stress field is recorded by changes in clastic dyke orientation and their deformation. Compression caused multiple westerly directed submarines slides from uplifts in easterly located regions. This event is not recorded in the Thrace Basin. Finally, the Miocene tectonic activity formed NW- and NE-striking normal faults. The outlined tectonic history includes Early Oligocene extensional and compressional episodes recorded in the southern margin of the Black Sea that had hitherto not been known.
37
Martínez, F., A. Maksymowicz, H. Ochoa und D. Díaz. „Geometry of the inverted Cretaceous Chañarcillo Basin based on 2-D gravity and field data. An approach to the structure of the western Central Andes of northern Chile“. Solid Earth Discussions 7, Nr. 3 (17.08.2015): 2311–46. http://dx.doi.org/10.5194/sed-7-2311-2015.
Der volle Inhalt der QuelleAnnotation:
Abstract. This paper discusses an integrated approach that provides new ideas about the structural geometry of the NNE-striking, Cretaceous Chañarcillo Basin located along the eastern Coastal Cordillera in the western Central Andes of northern Chile (27–28° S). The results obtained from the integration of two transverse (E–W) gravity profiles with previous geological information, show that the architecture of this basin is defined by a large NNE–SSE-trending and east-vergent anticline ("Tierra Amarilla Anticlinorium"), which is related to the positive reactivation of a former Cretaceous normal fault (Elisa de Bordos Master Fault). Moreover, intercalations of high and low gravity anomalies and steep gravity gradients reveal a set of buried, west-tilted half-grabens associated with a synthetic normal fault pattern. These results, together with the uplift and folding style of the Cretaceous syn-rift recognized within the basin, suggest that their complete structural geometry could be explained by an inverted fault system linked to the shortening of pre-existing Cretaceous normal fault systems. Ages of the synorogenic deposits exposed unconformably over the frontal limb of the Tierra Amarilla Anticlinorium confirm a Late Cretaceous age for the Andean deformation and tectonic inversion of the basin.
38
Martínez, F., A. Maksymowicz, H. Ochoa und D. Díaz. „Geometry of the inverted Cretaceous Chañarcillo Basin based on 2-D gravity and field data – an approach to the structure of the western Central Andes of northern Chile“. Solid Earth 6, Nr. 4 (03.12.2015): 1259–76. http://dx.doi.org/10.5194/se-6-1259-2015.
Der volle Inhalt der QuelleAnnotation:
Abstract. This paper discusses an integrated approach that provides new ideas about the structural geometry of the NNE-striking, Cretaceous Chañarcillo Basin located along the eastern Coastal Cordillera in the western Central Andes of northern Chile (27–28° S). The results obtained from the integration of two transverse (E–W) gravity profiles with previous geological information show that the architecture of this basin is defined by a large NNE–SSE-trending and east-vergent anticline ("Tierra Amarilla Anticlinorium"), which is related to the positive reactivation of a former Cretaceous normal fault (Elisa de Bordos Master Fault). Moreover, intercalations of high and low gravity anomalies and steep gravity gradients reveal a set of buried, west-tilted half-grabens associated with a synthetic normal fault pattern. These results, together with the uplift and folding style of the Cretaceous synextensional deposits recognized within the basin, suggest that its structure could be explained by an inverted fault system linked to the shortening of pre-existing Cretaceous normal fault systems. Ages of the synorogenic deposits exposed unconformably over the frontal limb of the Tierra Amarilla Anticlinorium confirm a Late Cretaceous age for the Andean deformation and tectonic inversion of the basin.
39
Connelly, James N., Jeroen AM van Gool und Flemming C. Mengel. „Temporal evolution of a deeply eroded orogen: the Nagssugtoqidian Orogen, West Greenland“. Canadian Journal of Earth Sciences 37, Nr. 8 (01.08.2000): 1121–42. http://dx.doi.org/10.1139/e00-032.
Der volle Inhalt der QuelleAnnotation:
The east-northeast-trending Paleoproterozoic Nagssugtoqidian Orogen of West Greenland records the response of deep crust to collision of the North Atlantic craton and a lesser known cratonic mass to the north. This paper presents conventional UPb ages of documented magmatic and thermotectonic events within this orogen, thus providing a precise time frame for its development and offering a test of previous spatial and temporal correlations with segments of the Trans-Hudson Orogen of northern Labrador and Quebec. Convergence of the two cratons culminated in a collision that commenced after 1873+74 Ma, the crystallization age of the youngest known pre-Nagssugtoqidian, subduction-related intrusion. Earliest collisional deformation was thrust dominated (west-northwest vergent) and caused thickening and consequent heating to peak temperatures by ca. 1850 Ma. Subsequent north-south shortening at elevated temperatures was accommodated by a fold-dominated style of deformation dated at 1825 ± 1 Ma. Between 1821 and 1778 Ma, temperatures remained sufficiently high to generate pegmatites, metamorphic zircon, and titanite, but no major, penetrative structures are known to have formed in this interval. Further shortening between 1779 ± 6 and 1774 ± 6 Ma exploited preexisting fabrics in steep F3 fold limbs to form discrete, east-northeast west-southwest-oriented, sinistral steep belts that are not important crustal boundaries. One of these late, steep belts is cut by 17721761 Ma pegmatites, indicating that deformation was waning by this time. Slow cooling followed the late shearing, with rutile closing in the central Nagssugtoqidian Orogen as late as 1676 ± 10 Ma. The timing of tectonic events in the Nagssugtoqidian Orogen is indistinguishable from that of the QuebecBaffin and Torngat segments of the Trans-Hudson Orogen of northeastern Laurentia. Accepting an intercratonic setting for the Nagssugtoqidian Orogen, this new data require that the QuebecBaffin, Torngat, and Nagssugtoqidian orogens meet in a triple junction offshore. This geometry implies a genetic link between the Rinkian and Nagssugtoqidian belts of West Greenland, thereby defining a middle- to deep-crustal collisional belt more than 900 km wide.
40
Law, Richard D., J. Ryan Thigpen, Sarah E. Mazza, Calvin A. Mako, Maarten Krabbendam, Brandon M. Spencer, Kyle T. Ashley, Robin A. Strachan und Ella F. Davis. „Tectonic Transport Directions, Shear Senses and Deformation Temperatures Indicated by Quartz c-Axis Fabrics and Microstructures in a NW-SE Transect across the Moine and Sgurr Beag Thrust Sheets, Caledonian Orogen of Northern Scotland“. Geosciences 11, Nr. 10 (30.09.2021): 411. http://dx.doi.org/10.3390/geosciences11100411.
Der volle Inhalt der QuelleAnnotation:
Moine metasedimentary rocks of northern Scotland are characterized by arcuate map patterns of mineral lineations that swing progressively clockwise from orogen-perpendicular E-trending lineations in greenschist facies mylonites above the Moine thrust on the foreland edge of the Caledonian Orogen, to S-trending lineations at higher structural levels and metamorphic grades in the hinterland. Quartz c-axis fabrics measured on a west to east coast transect demonstrate that the lineations developed parallel to the maximum principal extension direction and therefore track the local tectonic transport direction. Microstructures and c-axis fabrics document a progressive change from top to the N shearing in the hinterland to top to the W shearing on the foreland edge. Field relationships indicate that the domain of top to the N shearing was at least 55 km wide before later horizontal shortening on km-scale W-vergent folds that detach on the underlying Moine thrust. Previously published data from the Moine thrust mylonites demonstrate that top to the W shearing had largely ceased by 430 Ma, while preliminary isotopic age data suggest top to the N shearing occurred at ~470–450 Ma. In addition, data from the east coast end of our transect indicate normal-sense top down-SE shearing at close to peak temperatures at ~420 Ma that may be related to the closing stages of Scandian deformation, metamorphism and cooling/exhumation.
41
Kneller, B. C., und A. M. Bell. „An Acadian mountain front in the English Lake District: the Westmorland Monocline“. Geological Magazine 130, Nr. 2 (März 1993): 203–13. http://dx.doi.org/10.1017/s0016756800009869.
Der volle Inhalt der QuelleAnnotation:
AbstractThe structure of the southern and central English Lake District is that of a southeast-facing monocline, named here the Westmorland Monocline. This 10 km wide zone of highly cleaved, southeast-dipping rocks separates gently dipping, poorly cleaved Borrowdale Volcanic Group to the north from extensively folded but regionally subhorizontal Windermere Group (foreland basin) rocks to the south. The monocline formed early in the local Acadian deformation sequence, and accommodates at least 8 km of uplift. It coincides with the steep concealed margin of the Lake District batholith. A major northwest-dipping shear zone is revealed in the deepest levels now exposed within the monocline, in the Skiddaw Group rocks of the Black Combe inlier.The monocline has the characteristics of a mountain front, providing significant tectonic elevation across a foreland-dipping panel of rocks, with no hinterland-dipping thrust visible at the surface. We interpret the uplift as the consequence of a southeast-vergent thrust with a gently northwest-dipping ramp beneath the central Lake District, continuing southeastwards as a flat detachment beneath the Windermere Group. A displacement up the ramp of about 20 km is accommodated by backthrusting within the monocline and by shortening within the Windermere Group of the hangingwall southeast of the monocline. The tip lies beyond the limit of the Lower Palaeozoic inlier, beneath Carboniferous cover.
42
Chavant, Martin, und Zoï Kapoula. „Eye-Movement Deficits in Seniors with Hearing Aids: Cognitive and Multisensory Implications“. Brain Sciences 12, Nr. 11 (24.10.2022): 1425. http://dx.doi.org/10.3390/brainsci12111425.
Der volle Inhalt der QuelleAnnotation:
In recent years, there has been a growing body of literature highlighting the relationship between presbycusis and consequences in areas other than hearing. In particular, presbycusis is linked to depression, dementia, and cognitive decline. Among this literature, the effect of hearing aids, currently the most common method of treating presbycusis, is also a growing research topic. This pilot study aims to explore the effects of hearing aids on the cognitive and multisensory consequences of presbycusis. To that purpose, saccades and vergences eye movements were studied, towards visual and audiovisual targets, of a presbycusis population wearing hearing aids for an average of two years. These measurements were done whether or not participants were wearing their hearing aids. Eye-movement characteristics, particularly latencies (the reaction time taken to initiate an eye movement), allows one to measure attentional and multisensory characteristics. Previous studies showed that presbycusis was linked with an increase of saccade latencies and an improvement in audiovisual interaction capacities, i.e., latencies for audiovisual targets are shorter than those for visual targets. Eye movements are measured and analyzed with REMOBI and AIDEAL technologies. Results show a shortening, with hearing aids, of right saccade latencies to visual targets, suggesting an increase in attention and/or engagement. Yet, saccade latencies are not shorter for audiovisual vs. visual targets alone, neither when wearing hearing aids, nor without. Moreover, convergence latencies are particularly slow for any type of target and with or without hearing aids. The results suggest deficits for audiovisual interactions and the initiation of convergences in that population. These deficits could be part of the factors triggering the need to wear hearing aids. These results therefore show interesting relationships between hearing-aid wearing in a presbycusis population and oculomotricity and invite further research in this area.
43
Perelló, José. „Geologic observations in the San Marcos area, Coahuila, Mexico: the case for sediment-hosted stratiform copper–silver mineralization in the Sabinas basin during the Laramide orogeny“. Boletín de la Sociedad Geológica Mexicana 73, Nr. 3 (01.12.2021): A160321. http://dx.doi.org/10.18268/bsgm2021v73n3a160321.
Der volle Inhalt der QuelleAnnotation:
The sediment-hosted stratiform copper–silver mineralization in the San Marcos area of Coahuila, northeastern Mexico occurs predominantly at an Early Cretaceous redox boundary between footwall siliciclastic red beds of the San Marcos Formation and hanging-wall carbonate strata of the Cupido Formation in the Sabinas basin. The hypogene mineralization is mainly present as chalcocite-group minerals, with additional bornite and chalcopyrite, and everywhere occurs in both disseminated and vein/veinlet forms. Supergene copper-bearing oxides (malachite, chalcanthite, azurite, chrysocolla) are, however, the dominant surface expression of the mineralization. Additional sediment-hosted stratiform copper–silver mineralization also occurs, albeit erratically, in lower strata of the Sabinas basin as well as in veins in basement granitoids, thus spanning ~3000 m of basin stratigraphy. Where best developed, the stratiform mineralization displays intense structural control proximal to the regional San Marcos fault system. This major bounding fault, regional in nature and with numerous periods of activity, controlled the evolution of the Sabinas basin. Structural controls on mineralization include stacked, shallow-angle, bedding-parallel, northeast-vergent thrust faults and associated drag folds, in addition to numerous, steeply-dipping, northeast-trending copper-bearing veins and veinlets. The mineralized veins and veinlets, and the bedding-parallel thrusts display mutually crosscutting relationships. These elements are all consistent and in harmony with a regional northeast-trending direction of horizontal shortening accompanying reverse motion of the San Marcos fault system. Inversion along the San Marcos fault system, and the entire Sabinas basin in the Paleogene from ~60 to 40 Ma, resulted from wholesale contractional deformation during the Laramide (Mexican) orogeny. Hence, emplacement of the sediment-hosted stratiform copper–silver mineralization at San Marcos, and elsewhere in the larger Coahuila region, is interpreted as a natural corollary of large-scale, metal-bearing fluid expulsion, migration, and precipitation resulting from orogenic shortening, lithostatic loading, and squeezing of the Sabinas basin during Mexican orogen construction. Although sedimentation of the host strata in the Sabinas basin took place in a pericratonic setting associated with the opening of the Gulf of Mexico, sediment-hosted stratiform copper-silver mineralization occurred during orogenic uplift and conversion of the original basin into an orogen-foreland pair, with similarities to some of the world´s largest sediment-hosted stratiform copper provinces.
44
Zhou, Jianxun, Fengyin Xu, Chunguang Wei, Gang Li, Fusheng Yu und Hengmao Tong. „Shortening of analogue models with contractive substrata: Insights into the origin of purely landward-vergent thrusting wedge along the Cascadia subduction zone and the deformation evolution of Himalayan–Tibetan orogen“. Earth and Planetary Science Letters 260, Nr. 1-2 (August 2007): 313–27. http://dx.doi.org/10.1016/j.epsl.2007.05.048.
Der volle Inhalt der Quelle
45
BONINI, MARCO. „Basement-controlled Neogene polyphase cover thrusting and basin development along the Chianti Mountains ridge (Northern Apennines, Italy)“. Geological Magazine 136, Nr. 2 (März 1999): 133–52. http://dx.doi.org/10.1017/s0016756899002277.
Der volle Inhalt der QuelleAnnotation:
The Chianti Mountains is an important sector of an E-verging regional thrust-related fold (the so-called Tuscan Nappe) extending along the whole length of the Northern Apennines. This thrust system involves the Tuscan Sequence superposing the Macigno sandstones onto Cervarola-Falterona sandstones, both of which are sedimented in adjacent foredeep basins. Detailed field mapping and analysis of superposition relations among tectonic structures, as well as correlation between structures and syntectonic deposition, has allowed Chianti Mountain evolution to be interpreted in terms of three main stages of deformation.The D1 stage resulted in the NE-directed synsedimentary thrusting of the Macigno onto the Cervarola-Falterona sandstones, while large NE to ENE-vergent thrust-related folds developed during the two successive deformation stages (D2 and D3). Fault-propagation folds developed during the D2 stage, and were affected by the Main Chianti Mountains Thrust (MCMT) during the successive D3 stage. In particular, the D3 stage has been correlated to the development, during the Pliocene period, of the hinterland Upper Valdarno Basin, which was previously considered to be an extensional basin. In fact, this continental basin formed along the eastern margin of the Chianti Mountains, ahead of the MCMT that also produced a shortening of the basin fill. With the beginning of the Quaternary period, the tectonic regime switched to extensional, as manifested by the development of a normal fault system on the opposite basin margin.The data presented here allow us to infer that the Chianti Mountains thrust system (D2 and D3) developed during a time interval spanning from the Late Miocene (∼12 Ma) until the Late Pliocene (∼2 Ma) periods. In the Northern Apennines, polyphase thrusting recorded by cover rocks has been related to the activity of basement thrusts, which have been recently evidenced by geophysical data. In this context, the two latest stages of deformation recognised in the Chianti Mountains have been attributed to the activity of the Abetone–Cetona crustal thrust, the deformational effects of which propagated forward in the sedimentary cover.
46
Cao, Kai, Philippe Hervé Leloup, Guocan Wang, Wei Liu, Gweltaz Mahéo, Tianyi Shen, Yadong Xu, Philippe Sorrel und Kexin Zhang. „Thrusting, exhumation, and basin fill on the western margin of the South China block during the India-Asia collision“. GSA Bulletin 133, Nr. 1-2 (30.04.2020): 74–90. http://dx.doi.org/10.1130/b35349.1.
Der volle Inhalt der QuelleAnnotation:
Abstract The pattern and timing of deformation in southeast Tibet resulting from the early stages of the India-Asia collision are crucial factors to understand the growth of the Tibetan Plateau, but they remain poorly constrained. Detailed field mapping, structural analysis, and geochronological and thermochronological data along a 120 km section of the Ludian-Zhonghejiang fold-and-thrust belt bounding the Jianchuan basin in western Yunnan, China, document the early Cenozoic tectonic evolution of the conjunction between the Lanping-Simao and South China blocks. The study area is cut by two major southwest-dipping brittle faults, named the Ludian-Zhonghejiang fault and the Tongdian fault from east to west. Numerous kinematic indicators and the juxtaposition of Triassic metasedimentary rocks on top of Paleocene strata indicate thrusting along the Ludian-Zhonghejiang fault. Similarly, structural analysis shows that the Tongdian fault is a reverse fault. Between these structures, fault-bounded Permian–Triassic and Paleocene rocks are strongly deformed by nearly vertical and upright southwest-vergent folds with axes that trend nearly parallel to the traces of the main faults. Zircon and apatite (U-Th)/He and apatite fission-track data from a Triassic pluton with zircon U-Pb ages of 237–225 Ma in the hanging wall of the Ludian-Zhonghejiang fault, assisted by inverse modeling, reveal two episodes of accelerated cooling during 125–110 Ma and 50–39 Ma. The Cretaceous cooling event was probably related to crustal thickening during the collision between the Lhasa and Qiangtang terranes. The accelerated exhumation during 50–39 Ma is interpreted to record the life span of the fold-and-thrust belt. This timing is corroborated by the intrusive relationship of Eocene magmas of ca. 36–35 Ma zircon U-Pb age into the fold-and-thrust belt. Early Cenozoic activity of the deformation system controlled deposition of alluvial-fan and braided-river sediments in the Jianchuan basin, as evidenced by eastward and northeastward paleoflows and terrestrial clasts derived from the hanging wall of the Ludian-Zhonghejiang thrust. Since 39 Ma, decreasing cooling rates likely reflect cessation of activity on the fold-and-thrust belt. Early Cenozoic compressive deformation on the western margin of the South China block together with geological records of contraction in central, northern, and eastern Tibet document Eocene upper-crustal shortening located in the Himalaya, Qiangtang terrane, and northern plateau margins together with contractional basin development in the intervening Lhasa, Songpan-Garze, and Kunlun terranes, coeval with or shortly after the onset of the India-Asia collision. This suggests that moderate crustal shortening affected a large part of Tibet in a spaced way, contrary to models of homogeneous crustal thickening soon after the collision, and prior to the main crustal thickening, propagating progressively from south to north. This complex deformation pattern illustrates the complexity of Asian crustal rheology, which contrasts with assumptions in existing geodynamic models.
47
Laumonier, Bernard, Christian Marignac und Philippe Kister. „Polymetamorphism and crustal evolution of the eastern Pyrenees during the Late Carboniferous Variscan orogenesis“. Bulletin de la Société Géologique de France 181, Nr. 5 (01.09.2010): 411–28. http://dx.doi.org/10.2113/gssgfbull.181.5.411.
Der volle Inhalt der QuelleAnnotation:
AbstractAbridged English version. – The Variscan Pyrenean belt (fig. 1) has been for long famous for its Late Carboniferous LP-HT metamorphism, characterised by the prograde succession, in medium grade metapelites, of biotite, cordierite, andalusite and sillimanite, together with staurolite and garnet [Guitard et al., 1996]. However, the discovery of two kyanite generations lead Azambre and Guitard [2001] to propose a polymetamorphic evolution, with an early (MI) and a late (MIII) kyanite-bearing Barrovian stage, preceding and following the main LP-HT stage (MII).Geological settingThe Variscan orogeny in the Pyrenees occurred from Namurian to Early Stephanian (c. 325-300 Ma), following the deposition of thick Ediacarian-Ordovician silico-clastites, Silurian to Early Caboniferous carbonates, and pre-orogenic Mid-Carboniferous flyschs.Two main tectonic events are recorded, each one subdivided into regionally correlated sub-events (phases) (table I), allowing a detailed correlation between tectonics, metamorphism and plutonism. The Namurian to Westphalian D1 event (c. 325-310 Ma) resulted in a S-vergent fold and thrust belt (with 100–150 km of N-S shortening) and the development of the main, sub-horizontal, Sr schistosity (D1c phase), coeval with MI. The Westphalian-Early Stephanian D2 event (310-300 Ma) was more complex. First, a syn-convergence extensional phase (N-vergent backfolds and E-W extension) resulted in the E-directed escape of the upper crust (D2a phase). Then, a renewal of the N-S shortening was marked by large upright anticlines (domes) and narrower synclines, with up to 10 km amplitudes (e.g., the Canigou anticline-Villefranche syncline pair) (D2b phase). Both D2a and D2b were coeval with MII and the emplacement of early granitoid sills and laccoliths (e.g., the Ansignan hypersthene-granite in the Agly Massif). Later on, D2 evolved into a transcurrent regime, with belt-parallel dextral transpression (D2c and D2c phases). D2c was coeval with the main stage of granite emplacement under low-grade conditions, allowing the expression of a conspicuous Mγ contact metamorphism (e.g., Mont-Louis pluton). D2d ended the D2 event, with the development of retrograde dextral-reverse mylonites. The late MIII metamorphic event encompassed D2c and D2d (and possibly D2b).The early MI Barrovian metamorphic eventThe MI Barrovian metamorphic event resulted from the crustal thickening associated with the development of the D1 intra-cratonic wedge. It was of low-grade, with a chlorite-muscovite Sr schistosity, in the part of the belt that was subsequently overprinted by the syn-MII transformation of chlorite into biotite. The only remnants of MI medium-grade conditions are found as early kyanite in the deepest domains of the Castillon, St-Barthélémy, Agly and Aston massifs, being there obliterated under high-grade MII conditions, and in the core of the Canigou anticline (Velmanya, point v in fig. 2), where a relict kyanite-staurolite-anorthite paragenesis is known, shielded by MII cordierite. The reconstructed P-T conditions at the thermal peak of MI are 5 kbar (19 km) and 575oC (fig. 2), implying the existence of a (now eroded) major D1 nappe (≥ 7 km thick).The main MII LP-HT metamorphic eventStructural domes and medium– or high-grade MII zones are broadly coincident, high-grade conditions being only encountered in the core of the Albères massif, the southern Aston Dome and the North-Pyrenean massifs (grading there up to the LP granulite facies) (fig. 1).Subdivisions of the MII eventThe prograde MII metamorphism is essentially syn-D2a, with clear syn-kinematic growth of the medium-grade minerals, and the main regional tectono-metamorphic D2a/MII structure is evidently deformed and strongly folded by the D2b phase: the D2b domes are basically post-metamorphic. However, a detailed examination of the blastesis-deformation relationships shows that staurolite is pre- to-synkinematic for D2a, whereas andalusite is strictly synkinematic (and consequently is often observed shielding the staurolite), cordierite being syn-to post-kinematic and syn-D2b in some instances. This allows a subdivision of the MII event into three stages:– MIIs, pre-to-syn-D2a, characterised by the staurolite-andalusite (And1 without cordierite) association, with development of a staurolite zone grading downwards into an andalusite (St → And1) zone. – MIIa, syn-to post-D2a (but always developed prior to D2b), characterised by the cordierite (Cord1)-andalusite (And2) association (without staurolite), with development of a thin cordierite zone grading downwards into an andalusite (Cord1 → And2) zone. – MIIb, post-D2a and syn-D2b, characterised by a large cordierite (Cord2) zone developed at the expense of an-dalusite (And → Cord2), only found in the core of the D2b anticlines (e.g., the Garonne dome).Thus, although MII is basically pre-D2b, and the MIIs and MIIa medium-grade isogrades are folded, it appears that metamorphism was still active in the cores of the ascending D2b domes (MIIb). Moreover, in the core of some domes, prograde sillimanite is also syn-kinematic of the D2b phase, and the sillimanite-muscovite isograde may obliquely overprint the MIIa isogrades, as in the Canigou dome. This is related to the syn-D2b emplacement of granite sheets (e.g., the Canigou granite) and may be interpreted as an aureola of “regional-contact” metamorphism, noted MIIγ, that was evidently coeval with MIIb, and enhanced its effects.P-T-t path of the MII eventThe P-T-t path of the MII event may be described using the petrogenetic grids of Pattison et al. [2002] and Pattison and Vogl [2005] (fig. 3). From MIIs to MIIb, it records a prograde anti-clockwise path, following a post-MI clockwise exhumation path, with ≥ 7 km eroded (fig. 2B). The MIIs pressure was close to 3 kbar (10–11 km) in the St zone and decreased to 2.5 kbar (9 km) at the MIIa stage (And2 isograde), for an estimated temperature of 540oC (based on the triple point of Holdaway [1971], the thermobarometer of Pattison et al. [2002] and independent fluid inclusion data by Kister et al. [2003]). A further pressure decrease, down to 2 kbar (7 km), and a temperature increase (up to 600oC) is registered in the MIIb cordierite zone in the core of active D2b domes. Except for the cores of the domes, MIIa remained the peak temperature event, and during MIIb pressure remained constant (or was re-increasing in the syncline cores) and temperature was constant or decreasing. At the end of the MII event (MIIb-MIIγ), extreme conditions of c. 4 kbar and 700–730oC are recorded in the deepest parts of the belt, where anatexis, succeeding to a sillimanite-K-feldspar zone, is observed, as in the Albères Massif and some North-Pyrenean Massifs.The MII metamorphism as a syn-tectonic plutono-metamorphic eventBased on the observation of the deep crust outcropping in the North Pyrenean massifs, Vielzeuf [in Guitard et al., 1996] concluded that emplacement of mafic melts in the Carboniferous lower crust was responsible for the MII metamorphism. At the beginning of the process, a regional thermal anomaly is superimposed to the middle crust (MIIs-MIIa), directly reflecting the emplacement of mafic sills in the underlying lower crust (fig. 4A). Heat is transferred conductively and, most likely, advected by the aqueous-carbonic fluids issued from the devolatilising lower crust (fluid inclusion data). Heat advection by melts characterised the end of the MII event, with development of more or less local thermal anomalies: still “regional” (MIIbγ) as in the Garonne dome, or directly liked to sheet-like granite intrusions (MIIγ) as at the bottom of the Mont-Louis pluton (fig. 4B) or at the contact of the Canigou granite (fig. 4C).The late MIII Barrovian metamorphic eventThe MIII event is mainly characterised in the eastern massifs (Albères, Cap de Creus), where a retrogressive kyanite (so-called “hysterogenic” kyanite) is overprinting high-grade assemblages. Although poorly expressed, MIII minerals in these massifs define two zones, with an external chloritoid zone and an internal kyanite-staurolite zone. A MIII chloritoid zone (sillimanite → chloritoid) is also observed in the core of the Canigou dome. Under the kyanite-staurolite equilibrium hypothesis, the peak MIII P-T conditions in the eastern massifs are estimated at 5 kbar and 575oC, that would imply a pressure increase of 1 to 1.5 kbar (4–6 km deepening) starting from the end of MII, associated with a severe temperature decrease of 150oC. Such an overpressure cannot be due to the D2d dextral-inverse mylonites. However, a fluid inclusion study [Kister et al., 2003] demonstrated that the rocks of the Villefranche syncline did register a pressure increase at the D2b stage, i.e., experienced effective downwards displacement during the syncline formation, and it may be estimated that, in the core of the syncline, a depth increase of 7–8 km could have been attained. Now, in the Cap de Creus massif, the highest MIII grade is observed in the core of the D2b Birba syncline, analogous to the Villefranche syncline. Thus, D2b deepening in the syncline cores may have contributed to the pressure increase. An additional increase may have been provided by sedimentary accumulation in an overlying (and now eroded) syn-orogenic basin (fig. 5). While such a process may explain the development of MIII associations in the D2b synclines, it remains to explain its appearance in the anticlines (Albères, Canigou). However, in the same fluid inclusion study referred to just above [Kister et al., 2003], it is demonstrated that, post-dating D2c and the late pluton emplacement, the studied area suffered a severe isobaric temperature drop, allowing the appearance of chloritoid in the Canigou core (fig. 5). A similar explanation may hold for the Albères massif, if it is accepted there that late kyanite and staurolite were not in equilibrium: starting from the peak MII conditions (c. 4 kbar and 650o–700oC), a strong isobaric cooling would have allowed the successive appearance of staurolite and kyanite.Discussion and conclusionTimingThe youngest pre-orogenic flyschs are dated (in the Axial Zone) from the Namurian-Westphalian boundary (315±5 Ma), thus setting a minimal age for D1-MI. On the other hand, in the northern Pyrenean Agly massif, the Ansignan hypersthene-granite, which is coeval with MII, is dated at around 315-305 Ma, and the associated norites, likely testifying for the mafic magmatism at the origin of the heat flux responsible for MII, are themselves dated at c. 315 Ma. Finally, the large syn-D2c (post-MII) granite plutons are all dated at 307±3 Ma (i.e., close to the Westphalian-Stephanian boundary). Taken together (with the possibility of a slight diachronism between the North Pyrenean massifs and the Axial Zone, and, within the Axial Zone, between east and west), these data indicate that the MI-MII transition and the whole D2a–c/MII development took place in a very restricted time interval (c. 10 Ma), in Westphalian to Stephanian times.Crustal rheology and orogenic developmentAt the end of the Namurian crustal subduction (D1-MI), the Pyrenean crust, that had been thickened with at least a doubling of the upper crust thickness, had begun to experience uplift and erosion. This exhumation process rapidly changed from retrograde to prograde (MIIs-MIIa) during the D2a (MII) syn-convergence extensional phase.The D2a sub-event was marked by the development of three interrelated processes: (i) isotherm upwelling, regional stratiform MII metamorphism and partial melting in the middle crust, as a result from the intrusion, in the lower crust, of mafic magmas of mantellic derivation; (ii) thinning of the thickened crust; (iii) first arrival of granite plutons in the middle crust. It is thought, according to Vielzeuf [inGuitard et al., 1996], that these processes were initiated by a lithospheric delamination process.At the end of D2a, the crustal rheology had been modified, with a partially melted middle crust that received granitic melts issued from the melting of the lower crust. This highly ductile middle crust was sandwiched between a thick (≥ 10 km) rigid upper crust and a less ductile granulitised hot lower crust (800o–900oC), thus allowing the progressive decoupling of the upper and lower crust from D2a to D2c. The buckling of the upper crust, with formation of the large upright D2b folds, became therefore possible, forcing the injection of deep anatectic melts in the anticline cores (a probable explanation of the MIIbγ thermal culmination), and creating, in the deepened syncline cores, the strong pressure increase that favoured MIII inception.However, the MII isogrades are frozen in their folded position, indicating that cooling of the belt had indeed begun since at least the end of the D2b phase. The cooling was sufficiently rapid to be expressed in the Axial Zone by a sub-isobaric temperature decrease, at the origin of the MIII Barrovian and retrograde event, coeval with the late D2c and D2d phases. In the North Pyrenean Massifs, where the D2d phase was extensive, the retrograde MIII event could not be expressed, due to both decompression and thermal effects of the extension.A summary of this complex evolution is given in figure 6. Finally, the interrelated D2 and MII events appear as the record, in the middle-upper crust, of a very short, but very intense heating event that strongly modified the rheologic behaviour of the crust inherited from the D1 crustal subduction and allowed a transitory decoupling of the upper and lower crust. The isobaric MIII event records an exceptionally rapid return to the “normal” thermal and rheologic structures of the crust.The rapidly changing tectonic and thermal conditions that characterise the Variscan Pyrenees during the D2 event may be understood if the position of the Pyrenees within the southern branch of the West European Variscan belt is considered (fig. 7).
48
Uhlein, Alexandre, Marco Antônio Fonseca, Hildor José Seer und Marcel Auguste Dardenne. „TECTÔNICA DA FAIXA DE DOBRAMENTOS BRASÍLIA – SETORES SETENTRIONAL E MERIDIONAL.“ Geonomos, 01.12.2012. http://dx.doi.org/10.18285/geonomos.v2i20.243.
Der volle Inhalt der QuelleAnnotation:
A Faixa neoproterozóica de dobramentos e empurrões Brasília é uma das unidades tectônicas do Brasil Central. Uma análiseestrutural e tectônica da Faixa Brasília é aqui apresentada, com dois domínios estruturais: (1) interno, com unidades alóctones, foliação Spsubhorizontal ou suavemente dobrada e médio a alto grau de metamorfismo. (2) domínio externo, com estrutura de dobras e empurrões,predomínio de foliação Sp e médio a baixo grau de metamorfismo. A leste da Faixa Brasília ocorre o domínio cratônico (Craton do São Francisco), com unidades autóctones, suavemente dobradas. A vergência das dobras e empurrões é, geralmente, para o Cráton do SãoFrancisco. O encurtamento na cobertura é balanceado por zonas de cisalhamento, amplas dobras, falhas de empurrão e inversas e falhastranscorrentes. O estilo da deformação varia com o nível crustal. Assim, no domínio externo da faixa, predomina um estilo thin-skinned,enquanto que no domínio interno, aparecem zonas de deformação dúcteis mais intensas e largas, com metamorfismo mais alto (estilothick-skinned). O segmento sul da Faixa Brasília está mais deformado e provavelmente representa o resultado de uma colisão diacrônica,mais antiga, em relação ao setor setentrional. A mega inflexão dos Pirineus e a zona de superposição pode ser o resultado da interferênciaentre duas faixas neoproterozóicas distintas, com transporte tectônico local de Norte para o Sul.Palavras chave: Faixa móvel neoproterozóica Brasília; estilo nstrutural; evolução geodinâmica. ABSTRACTTECTONICS OF THE BRASÍLIA FOLD BELT: THE NORTHERN AND SOUTHERN PARTS - The Neoproterozoic (ca. 650-580) Ma Brasíliafold-and-thrust-belt is a major tectonic unit in Central Brazil and can be divided into two structural domains (internal and external). In theinternal domain, most surface rocks consist of allochthonous units in a higher metamorphic grade displaying low dipping cleavage,asymmetrical folds and thrusts with significant stratigraphic repetition. The external domain is a typical foreland fold-and-thrust belt wheremedium to low grade metamorphic rocks prevail and present steeply dipping cleavage Sp. Towards the cratonic area (cratonic domain),most lithostratigraphic units are authoctonous with vertical open folds and slaty cleavage. The general vergence of folds and thrust faults inboth domains is towards the east (São Francisco Craton). Shortening of cover across the fold belt is almost always balanced by coverbasementdetachments, fold-and-thrust structures and also by NE or NW trending wrench faults. The style of deformation variesconsiderably across strike due to crustal level. Typical thin-skinned fault-fold morphology in external domain gives rise downwards to morepervasive wide zones of ductile deformation at high metamorphic grades (thick-skinned structures) in the internal domain. The Southernpart of the Brasilia belt has a more complex deformational history than the northern one. This is probably due to structural overprintcaused by a diachronic collision. The Pirineus Inflection, where local vergence is towards the South, may represent the interference zonebetween the the two parts.Keywords: Neoproterozoic Brasília fold-and-thrust belt; structural style; Geodinamic evolution.
49
„Collision tectonics of the Ladakh-Zanskar Himalaya“. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences 326, Nr. 1589 (September 1988): 117–50. http://dx.doi.org/10.1098/rsta.1988.0082.
Der volle Inhalt der QuelleAnnotation:
The collision of the Indian Plate with the Karakoram-Lhasa Blocks and the closing of Neo-Tethys along the Indus Suture Zone (ISZ) is well constrained by sedimentologic, structural and palaeomagnetic data at ca. 50 Ma. Pre-collision high P— low T blueschist facies metamorphism in the ISZ is related to subduction of Tethyan oceanic crust northwards beneath the Jurassic-early Cretaceous Dras island arc. The Spontang ophiolite was obducted south westwards onto the Zanskar shelf before the Eocene closure (Dl). The youngest marine sediments on the Zanskar shelf and along the ISZ are Lower Eocene, after which continental molasse deposition occurred. After ocean closure, thrusting followed a SW-directed piggy-back sequence (D2). This has been modified by late-stage breakback thrusts, overturned thrusts and extensional normal faulting associated with culmination collapse and underplating. The ISZ and northern Zanskar shelf sequence are affected by late Tertiary redirected backthrusting (D3), which also affects the Indus molasse. A 50 km wide ‘pop-up’ zone with divergent thrust vergence was developed across the Zanskar Range. Balanced and restored cross sections indicate a minimum of 150 km of shortening across the Zanskar shelf and ISZ. Post-collision crustal thickening by thrust stacking resulted in widespread Barrovian metamorphism in the High Himalaya that reached a thermal climax during Oligocene-Miocene times. Garnet-biotite-muscovite + tourmaline granites were generated by intracrustal partial melting during the Miocene within the Central Crystalline Complex. Their emplacement on the hangingwall of localized ductile shear zones was associated with SW-directed thrusting along the Main Central Thrust (MCT) zone and concomitant culmination collapse normal faulting along the Zanskar Shear Zone (ZSZ) at the top of the slab. Metamorphic isograds have become inverted by post-metamorphic SW-verging recumbent folding and thrusting along the base of the High Himalayan slab. Along the top of the slab, isograds are the right way up but are structurally and thermally telescoped by normal faulting along the ZSZ. 1
50
Konstantinovskaya, Elena, Gennady Ivanov, Jean-Louis Feybesse und Jean-Luc Lescuyer. „Structural Features of the Central Labrador Trough: A Model for Strain Partitioning, Differential Exhumation and Late Normal Faulting in a Thrust Wedge under Oblique Shortening“. Geoscience Canada, 29.03.2019, 5–30. http://dx.doi.org/10.12789/geocanj.2019.46.143.
Der volle Inhalt der QuelleAnnotation:
The west-verging fold and thrust belt of the Central Labrador Trough originated as a part of the New Quebec Orogen from rift inversion as a result of oblique collision and dextral transpression between the Archean Superior craton and the Archean block of the Core Zone during the Trans-Hudson orogeny (1.82−1.77 Ga). The structures associated with dextral transpression are well established in the northern segment of the orogen but not in the central part. We present new field structural observations along the ca. 70 km long W−E Minowean-Romanet transect that include not only elements of thrust tectonics but also previously undocumented examples of strike-slip shear zones and late brittle, semi-brittle and ductile extensional structures which occurred both in the frontal and rear parts of the thrust wedge. The newly described low-angle mineral lineation, axes of cylindrical folds and dextral mylonitic shear zones in the footwall of the Romanet Fault are oriented subparallel to the orogen and reflect the early phase of oblique convergence. Mineral lineations and striations on planes of normal faults in the hanging wall of the Romanet Fault are oriented orthogonal to the orogen and correspond to a later phase of exhumation driven by the combined effects of erosion and underplating. To explain the increase in the degree of exhumation along the orogen in the study area from NW to SE, we propose a model of strain partitioning and differential exhumation that resulted from longitudinal variations of shortening and erosion under an oblique convergence setting.RÉSUMÉLa partie centrale de la ceinture de plissement et de chevauchement de la Fosse du Labrador de vergence vers l’ouest fait partie intégrante de l’Orogène du Nouveau-Québec, et résulte de la collision oblique avec transpression dextre entre le craton Supérieur archéen et le bloc archéen de la Zone noyau pendant l’Orogenèse trans-hudsonienne (1.82−1.77 Ga). Les structures associées à la transpression dextre sont bien établies dans la partie nord de l’orogène mais pas dans la partie centrale. Nous présentons de nouvelles observations structurales de terrain le long de la traverse ouest−est Minowean-Romanet d’environ 70 km de long, qui comprennent non seulement des évidences de tectonique de chevauchement, mais également des exemples encore non documentés de zones de cisaillement ductile et de structures d’extension fragiles, demi-fragiles et ductiles à la fois dans les parties frontales et arrière du prisme d’accrétion tectonique. La linéation minérale à faible plongement récemment décrite, les axes de plis cylindriques et les zones de cisaillement mylonitique dextre dans le compartiment inférieur de la faille de Romanet sont subparallèles à l’orogène et reflètent une phase précoce de la convergence oblique. La linéation et les stries minérales sur les plans des failles normales dans le compartiment supérieur de la faille de Romanet sont orientées orthogonalement à l’orogène et correspondent à la phase ultérieure d’exhumation induite par les effets combinés de l’érosion et de l’accrétion basale. Pour expliquer l’augmentation du degré d’exhumation le long de l’orogène du nord-ouest au sud-est dans la zone d’étude, nous proposons un modèle de partitionnement de la déformation et de l’exhumation différentielle résultant des variations longitudinales du raccourcissement et de l’érosion dans un contexte de convergence oblique.