Inhaltsverzeichnis
Auswahl der wissenschaftlichen Literatur zum Thema „Semiactive shock absorber“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Semiactive shock absorber" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Semiactive shock absorber"
1
Lozoya-Santos, Jorge de-J., Damián Cervantes-Muñoz, Juan Carlos Tudón-Martínez und Ricardo A. Ramírez-Mendoza. „Off-Road Motorbike Performance Analysis Using a Rear Semiactive EH Suspension“. Shock and Vibration 2015 (2015): 1–13. http://dx.doi.org/10.1155/2015/291089.
Der volle Inhalt der QuelleAnnotation:
The topic of this paper is the analysis of a control system for a semiactive rear suspension in an off-road two-wheeled vehicle. Several control methods are studied, as well as the recently proposed Frequency Estimation Based (FEB) algorithm. The motorcycle dynamics, as well as the passive, and semiactive dampers, and the algorithm controlled shock absorber models are loaded into BikeSim, a professional two-wheeled vehicle simulation software, and tested in several road conditions. The results show a detailed comparison of the theoretical performance of the different control approaches in a novel environment for semiactive dampers.
2
Wei, Tao, und Liu Zhiqiang. „Damping Multimode Switching Control of Semiactive Suspension for Vibration Reduction in a Wheel Loader“. Shock and Vibration 2019 (21.03.2019): 1–11. http://dx.doi.org/10.1155/2019/4535072.
Der volle Inhalt der QuelleAnnotation:
The aim of this work is the control design and analysis of a semiactive axle suspension system for vibration reduction in a wheel loader. Unlike a traditional semiactive suspension system with continuously adjustable shock absorber, in this work, a novel axle suspension with multiple damping modes is proposed for the wheel loader. The multimode switching damping characteristics are achieved by just changing the discrete statuses of two high-speed switch electromagnetic valves, which makes the damping adjustment simpler and more reliable. However, because of the existence of discrete events, i.e., the on-off statuses of switch electromagnetic valves, the axle suspension proposed for the wheel loader poses a challenging hybrid control problem. To solve this problem, the mixed logical dynamical (MLD) modeling approach for hybrid systems is applied to model the dynamic characteristics of the system damping control procedure. Using this model, a hybrid model predictive control (HMPC) strategy is further designed, which can determine the optimal switching sequences of the discrete damping modes according to the axle suspension performance indices. Finally, to verify the effectiveness of the proposed semiactive axle suspension with multiple damping modes and its control approach, simulation analyses are conducted.
3
Chen, Long, Dehua Shi, Ruochen Wang und Huawei Zhou. „Energy Conservation Analysis and Control of Hybrid Active Semiactive Suspension with Three Regulating Damping Levels“. Shock and Vibration 2016 (2016): 1–14. http://dx.doi.org/10.1155/2016/6196542.
Der volle Inhalt der QuelleAnnotation:
Active suspension has not been popularized for high energy consumption. To address this issue, this paper introduces the concept of a new kind of suspension. The linear motor is considered to be integrated into an adjustable shock absorber to form the hybrid active semiactive suspension (HASAS). To realize the superiority of HASAS, its energy consumption and regeneration mechanisms are revealed. And the system controller which is composed of linear quadratic regulator (LQR) controller, mode decision and switch controller, and the sliding mode control based thrust controller is developed. LQR controller is designed to maintain the suspension control objectives, while mode decision and switch controller decides the optimal damping level to tune motor thrust. The thrust controller ensures motor thrust tracking. An adjustable shock absorber with three regulating levels to be used in HASAS is trial produced and tested to obtain its working characteristics. Finally, simulation analysis is made with the experimental three damping characteristics. The impacts of adjustable damping on the motor force and energy consumption are investigated. Simulation results demonstrate the advantages of HASAS in energy conservation with various suspension control objectives. Even self-powered active control and energy regenerated to the power source can be realized.
4
Kou, Farong, Qiangqiang Jing, Chen Chen und Jianghao Wu. „Endocrine Composite Skyhook-Groundhook Control of Electromagnetic Linear Hybrid Active Suspension“. Shock and Vibration 2020 (29.02.2020): 1–17. http://dx.doi.org/10.1155/2020/3402168.
Der volle Inhalt der QuelleAnnotation:
In order to effectively improve vehicle riding comfort, handling stability, and realize vibration energy recovery, a new kind of electromagnetic linear hybrid active suspension (EMLHAS) integrated with linear motor and solenoid valve shock absorber is put forward. Firstly, for the analysis of the suspension performance, a quarter dynamic model of EMLHAS is established. At the same time, the mathematical models of a linear motor, including the active state and energy-regenerative state, are found. The correctness of mathematical models for the linear motor in the active and energy-regenerative states is verified by means of characteristic tests. Moreover, the velocity characteristic tests of solenoid valve shock absorber are carried out to determine its mathematical polynomial model in the semiactive state. Then, a new kind of multimode endocrine composite skyhook-groundhook control strategy is proposed. The suspension motion is divided into four modes according to the driving conditions of the vehicle. An endocrine control with long feedback and short feedback is combined with the skyhook-groundhook control. The control laws of the skyhook-groundhook controller and endocrine controller are, respectively, designed. Finally, the simulation analysis of suspension dynamic performance and energy-regenerative characteristic is done. The results show the control effect of endocrine composite skyhook-groundhook control is better than that of skyhook-groundhook control, which improves vehicle riding comfort and handling stability. Moreover, part of vibration energy is recovered.
5
Wu, Xiaojian, Xiang Qiu, Bing Zhou, Juhua Huang und Tingfang Zhang. „HIS-Based Semiactive Suspension Dual-Frequency-Range Switching Control to Improve Ride Comfort and Antiroll Performance“. Shock and Vibration 2019 (12.05.2019): 1–16. http://dx.doi.org/10.1155/2019/5193593.
Der volle Inhalt der QuelleAnnotation:
The parameter sensitivity analysis of a hydraulically interconnected suspension (HIS) system shows that the sensitivity of the vibration responses in the bounce and roll modes to the hydraulic parameters are complementary. A novel HIS-based semiactive control method was thereby proposed to improve ride comfort and antiroll performance. In addition, the classic sky-hook max-min damping switched strategy provides significant benefits around the body resonance, but otherwise performs similarly to, or sometimes even worse than, passive suspension. Therefore, a dual-frequency-range switching strategy, which has optimal max-min damping in both frequency ranges, was developed for improving the ride comfort in a wider frequency bandwidth. In this study, a 9-DOF HIS system dynamics model was established, and the hydraulically interconnected subsystem model was validated experimentally. Subsequently, the elastic and damping characteristics of the hydraulically interconnected subsystem, as well as the parameter sensitivity in bounce mode and roll mode, were analyzed. Next, the sensitive parameters were optimized under sinusoidal excitation at various frequencies, and a frequency-range selector used to determine the excitation frequency range and adjust the shock absorber damping was designed. Finally, simulations in the frequency domain and time domain show that the proposed HIS-based semiactive dual-frequency-range switching control suspension improves the ride comfort in a wider frequency bandwidth and enhances the antiroll performance in the transient and steady steering process.
6
Savaresi, Sergio M., und Cristiano Spelta. „Mixed Sky-Hook and ADD: Approaching the Filtering Limits of a Semi-Active Suspension“. Journal of Dynamic Systems, Measurement, and Control 129, Nr. 4 (20.11.2006): 382–92. http://dx.doi.org/10.1115/1.2745846.
Der volle Inhalt der QuelleAnnotation:
The problem considered in this paper is the design and analysis of control strategies for semiactive suspensions in road vehicles. The most commonly used control algorithm is the well-known sky-hook (SH) damping. Recently, a new control approach named acceleration driven damping (ADD) has been developed, using optimal-control theory. It has been shown that SH and ADD have complementary characteristics: SH provides large benefits around the body resonance; otherwise performs similarly to a passive suspension; instead, ADD provides large benefits beyond the body resonance. The first goal of this paper is to show that—in their specific frequency domains—SH and ADD provide quasi-optimal performances, namely, that it is impossible to achieve (with the same semi-active shock-absorber) better performances. This result has been obtained using the framework of the optimal predictive control, assuming full knowledge of the disturbance. This result is very interesting since it provides a lower-bound to semi-active suspension performances. The second goal of the paper is to develop a control algorithm which is able to mix the SH and ADD performances. This algorithm is surprisingly simple and provides quasi-optimal performances.
7
Choi, Seung-Bok. „Control Characteristics of ER Devices“. International Journal of Modern Physics B 13, Nr. 14n16 (30.06.1999): 2160–67. http://dx.doi.org/10.1142/s0217979299002265.
Der volle Inhalt der QuelleAnnotation:
The successful development of a new generation of technology incorporating an electro-rheological (ER) fluid requires three principal ingredients; advanced ER fluid, reliable mechanical mechanism and efficacious control scheme. This paper discusses the third one. After describing general, but stringent requirements for semiactive or active control systems featuring the ER fluid, feedback control characteristics of some specific ER devices are presented; a frequency-dependent feedback control of mode shape in a smart flexible structure containing the ER fluid, an optimal control of vibration in a semi-active suspension installed with ER shock absorbers, and a neural network control of position in a hydraulic ER valve-cylinder system.
8
Ginder, John M. „Behavior of Magnetorheological Fluids“. MRS Bulletin 23, Nr. 8 (August 1998): 26–29. http://dx.doi.org/10.1557/s0883769400030785.
Der volle Inhalt der QuelleAnnotation:
In the absence of an applied magnetic field, magnetorheological (MR) fluids typically behave as nearly ideal Newtonian liquids. The application of a magnetic field induces magnetic dipole and multipole moments on each particle. The anisotropic magnetic forces between pairs of particles promote the head-to-tail alignment of the moments and draws the particles into proximity. These attractive interparticle forces lead to the formation of chains, columns, or more complicated networks of particles aligned with the direction of the magnetic field. When these structures are deformed mechanically, magnetic restoring forces tend to oppose the deformation. Substantial field-dependent enhancements of the rheological properties of these materials result, as demonstrated in Figure 1.The myriad potential applications of MR and electrorheological (ER) fluids provide considerable motivation for research on these materials. The availability of fluids with yield stresses or apparent viscosities that are controllable over many orders of magnitude by applied fields enables the construction of electromechanical devices that are engaged and controlled by electrical signals and that require few or no moving parts. Potential automotive applications include electrically engaged clutches for vehicle powertrains and engine accessories as well as semiactive shock absorbers that can adapt in real time to changing road conditions. Semiactive dampers for rotorcraft control surfaces are among the potential aerospace applications. The critical need to mitigate the structural vibrations of large structures has led to the construction of large, high-force MR-fluid-based dampers. A promising application in manufacturing processes is the computer-aided polishing of precision optics in which abrasive particles are suspended in an MR fluid so that the polishing rate is determined in part by the strength of an applied magnetic field.
Dissertationen zum Thema "Semiactive shock absorber"
1
Gravatt, John Wilie. „Magneto-Rheological Dampers for Super-sport Motorcycle Applications“. Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/33022.
Der volle Inhalt der QuelleAnnotation:
In recent years, a flurry of interest has been shown for a relatively old technology called magneto-rheological fluids, or MR fluids. Multiple types of devices have been designed to implement this versatile fluid, including linear dampers, clutches, work-piece fixtures, and polishing machines. The devices have been used in automobiles, washing machines, bicycles, prosthetic limbs, and even smart structures.
This thesis focuses on another application of MR dampers, involving super-sport motorcycles. This paper introduces the topics of MR dampers and motorcycle suspensions, and why the two would be a good combination. A detailed history of MR fluids, MR dampers, and motorcycle suspension technologies is given next.
After a broad outline of MR dampers and motorcycle suspensions, the method of designing and manufacturing MR dampers is discussed. The damper design for this research is presented in detail, along with the design procedure used to make it.
Next, laboratory testing for it is covered, including the test equipment, test procedure, and the laboratory test results. Upon laboratory test completion, the field test setup and procedure are presented. The results of field tests with stock dampers and MR dampers with a variety of control systems is discussed.
The MR dampers provided a more stable ride than that of the OEM dampers. By reducing suspension displacement, settling time, and suspension oscillations, the MR dampers were able to reduce suspension geometry instability.
Lastly, concluding remarks are made on the research presented. Design flaws are discussed, as well as recommendations for future work in the same area.Master of Science
2
Žižlavský, Vít. „Návrh konstrukce rychlého elektromagnetického ventilu semiaktivního tlumiče“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444296.
Der volle Inhalt der QuelleAnnotation:
This diploma thesis’s focuses on the mechanical design of fast solenoid throttle valve for DCC semiactive damper. Current DCC dampers work with a time response of over 10 ms, which is not suitable for fast semiactive control of vehicle chassis. The time response needs to be shortened, to improve quality of regulation. The required time response is archived by new fast electromagnetic actuator for original CES valve. The actuator has been accelerated by reducing induction of eddy currents and by reducing weight of moving parts. New valve helped to reduce the time response of damper by 28 % to 8,1 ms. The results proved, that the time response is affected more by speed of the servo effect, which is closing main orifice, than by electromagnetic actuator. There is no more potential in accelerating CES valve by actuator.
Konferenzberichte zum Thema "Semiactive shock absorber"
1
Patten, W. N., H. C. Wu, W. Yan, R. L. Sack, C. C. Kuo und K. Shen. „Semiactive Control of Structural Vibrations“. In ASME 1993 Design Technical Conferences. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/detc1993-0236.
Der volle Inhalt der QuelleAnnotation:
Abstract Structural control can be used to mitigate dynamic structural response and prevent structures from reaching their limit states. Typical active vibration systems utilize large electric motors, and expensive hydraulic pumping equipment to provide force inputs to a structure during a dynamic event. The work here explores the effectiveness of low power, inexpensive semi-active control hardware to provide vibration attenuation, for structures. While there are a number of electro-mechanical devices that might provide semi-active control forces, the investigation here analyzed the use of an automatically adjustable hydraulic actuator (i.e., a shock absorber). The variation in damping characteristics is accomplished by using variable orificing. While semi-active hydraulic actuators are a relatively cheap means of providing smart damping for a structure, the development of effective closed loop control strategies for these devices is not a completely resolved issue. The paper develops a dynamic model of a semi-active actuator. Two inner loop controllers are then suggested, for the operation of the actuator. The control of a simple structure is then simulated. The paper closes with a comparison of the performances between a semi-active (clipped optimal) control and active control of a three story structure that is subject to an earthquake.
2
Wang, Gang, Gregory Hiemenz, Wei Hu und Norman M. Wereley. „A Constant Stroking Load Regulator for Shock Absorption“. In ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/smasis2011-4942.
Der volle Inhalt der QuelleAnnotation:
The goal of this study is to provide shock mitigation in an active (or semi-active) shock absorption system, typically comprising of a spring, and an adjustable stroking load element, such as an adaptive energy absorber (EA) or semiactive damper element, in which the stroking load can be electronically adjusted in real-time. Typically, there is a maximum limiting stroking load that can be accommodated by a payload. Thus, a Constant Stroking Load Regulator (CSLR) is developed that accepts sensor feedback, and then selects control gains that result in the energy absorber (EA) providing the required controllable stroking load. A key benefit of this regulator is that it is capable of adapting to a varying range of payload mass, impulse types, and impulse excitation levels. The payload mass is measured and used as a control input parameter. The measured impact velocity is used to determine the impulse acceleration level by assuming an impulse profile, which tends to be application-specific. Finally, the required constant stroking load is determined using a physics-based model. The CSLR is designed to achieve a “soft landing” such the payload comes to rest when the available stroke is used completely, in order to minimize the stroking load and thereby minimize the potential for payload damage. The CSLR methodology was then experimentally validated for a representative occupant protection system consisting of a seat suspension with an adaptive stroking element, which in this case was a magnetorheological energy absorber (MREA). A MREA was used as the stroking element because its stroking load can be adjusted electronically. To validate the CSLR strategy, experimental drop tests were conducted for two different payloads. The impact velocity was 10.3 ft/s (3.15 m/s) and the acceleration profile was a 50 ms duration half-sine pulse. The constant stroking load was pre-calculated as a function of payload mass and initial velocity. During each drop test, the required stroking load was supplied to the MREA in order to achieve a “soft landing.” The CSLR was successfully demonstrated under laboratory conditions. These tests demonstrated feasibility of using the CSLR, in conjunction with a MREA as the stroking element.
3
Craft, Michael J., Gregory D. Buckner und Richard D. Anderson. „Fuzzy logic control algorithms for MagneShock semiactive vehicle shock absorbers: design and experimental evaluations“. In Smart Structures and Materials, herausgegeben von Ralph C. Smith. SPIE, 2003. http://dx.doi.org/10.1117/12.484044.
Der volle Inhalt der Quelle