Einloggen

Thematische Bibliographien / Resin / Zeitschriftenartikel

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Resin.

Zeitschriftenartikel zum Thema „Resin“

Autor: Grafiati

Veröffentlicht am 4. Juni 2021

Zuletzt aktualisiert am 25. Mai 2024

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Resin" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Talango, Novriyanti, und Wawan Rauf. „ANALISIS KEKUATAN TARIK MATERIAL KOMPOSIT BERBAHAN SERAT BAMBU MAYAM“. JURNAL SIMETRIK 13, Nr. 2 (18.01.2024): 729–33. http://dx.doi.org/10.31959/js.v13i2.1897.

Der volle Inhalt der Quelle

Annotation:

Penelitian ini bertujuan mengetahuai kekuatan tarik dari bahan komposit serat bambu mayan dengan matriks polyester resing dan epoxy resing, serta katalis sebagai matriks atau pengikat dari serat bambu mayan (gigatochloa robusta) dengan perbandingan resin 90% dan 10% serat bambu mayan serta 80% resin dan 20% serat bambu mayan. Hasil Pengujian menunjukan kuat tarik komposit serat bambu mayan dengan perbandingan resin epoxy dan serat bambu 90:10 memiliki nilai rata-rata 44.79 N/mm2, sedangkan pada perbandingan 80:20 memiliki nilai rata-rata sebesar 50.01 N/mm2.. Hasil uji tarik dengan perbandingan 90:10 resin polyester dan serat bambu memiliki nilai rata-rata 51.3 N/mm2 dan pada perbandingan 80:20 memiliki nilai rata-rata sebesar 82.29 N/mm2. Perbedaan hasil tegangan dan regangan pada nilai rata-rata kuat tarik karena dua resin yang digunakan memiliki densitas dan sifat yang berbeda. pencampuran resin epoxy dan hardener perbandingan 3:1 dengan grade viksikositas encer menghasilkan sifat yang ulet. Pencampuran resin polyester 450 gr dan jumlah katalis 3 tetes dengan grade viksikositas kental menghasilkan sifat yang getas.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Patel, Hasmukh S., und Amel Muhson Naji. „Novel unsaturated polyester resins based on (maleated cyclohexanone-formaldehyde resin)-(epoxy resin) condensation“. International Journal of Plastics Technology 14, Nr. 1 (Juni 2010): 17–37. http://dx.doi.org/10.1007/s12588-010-0012-4.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Sanclimens, Glòria, Laia Crespo, Miquel Pons, Ernest Giralt, Fernando Albericio und Miriam Royo. „Saturated resins or stress of the resin“. Tetrahedron Letters 44, Nr. 9 (Februar 2003): 1751–54. http://dx.doi.org/10.1016/s0040-4039(03)00109-6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Pokonova, Yu V. „Resins and asphaltenes–modifiers for epoxy resin“. Chemistry and Technology of Fuels and Oils 43, Nr. 2 (März 2007): 135–39. http://dx.doi.org/10.1007/s10553-007-0026-6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Thompson, Kim A., und Dennis G. Hall. „Resin-to-resin Petasis borono-Mannich reaction between dialkylamino resins and supported boronic acids“. Chemical Communications, Nr. 23 (2000): 2379–80. http://dx.doi.org/10.1039/b006279k.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Hoshi, Ikuo. „Phenol-formaldehyde resin/epoxy resin.“ Kobunshi 37, Nr. 11 (1988): 824–25. http://dx.doi.org/10.1295/kobunshi.37.824.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Watts, David C. „Resin composite or composite resin?“ Dental Materials 36, Nr. 9 (September 2020): 1115. http://dx.doi.org/10.1016/j.dental.2020.07.002.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

MUSTATA, FANICA, und IOAN BICU. „Epoxy aniline formaldehyde resins modified with resin acids“. Polimery 46, Nr. 07/08 (Juli 2001): 534–39. http://dx.doi.org/10.14314/polimery.2001.534.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Robertson, Frank C. „Resin transfer moulding of aerospace resins—a review“. British Polymer Journal 20, Nr. 5 (1988): 417–29. http://dx.doi.org/10.1002/pi.4980200506.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Celik, Cigdem, Sevi Burcak Cehreli und Neslihan Arhun. „Resin composite repair: Quantitative microleakage evaluation of resin-resin and resin-tooth interfaces with different surface treatments“. European Journal of Dentistry 09, Nr. 01 (Januar 2015): 092–99. http://dx.doi.org/10.4103/1305-7456.149652.

Der volle Inhalt der Quelle

Annotation:

ABSTRACT Objective: The aim was to evaluate the effect of different adhesive systems and surface treatments on the integrity of resin-resin and resin-tooth interfaces after partial removal of preexisting resin composites using quantitative image analysis for microleakage testing protocol. Materials and Methods: A total of 80 human molar teeth were restored with either of the resin composites (Filtek Z250/GrandioSO) occlusally. The teeth were thermocycled (1000×). Mesial and distal 1/3 parts of the restorations were removed out leaving only middle part. One side of the cavity was finished with course diamond bur and the other was air-abraded with 50 μm Al2O3. They were randomly divided into four groups (n = 10) to receive: Group 1: Adper Single Bond 2; Group 2: All Bond 3; Group 3: ClearfilSE; Group 4: BeautiBond, before being repaired with the same resin composite (Filtek Z250). The specimens were re-thermocycled (1000×), sealed with nail varnish, stained with 0.5% basic fuchsin, sectioned mesiodistally and photographed digitally. The extent of dye penetration was measured by image analysis software (ImageJ) for both bur-finished and air-abraded surfaces at resin-tooth and resin-resin interfaces. The data were analyzed statistically. Results: BeautiBond exhibited the most microleakage at every site. Irrespective of adhesive and initial composite type, air-abrasion showed less microleakage except for BeautiBond. The type of initial repaired restorative material did not affect the microleakage. BeautiBond adhesive may not be preferred in resin composite repair in terms of microleakage prevention. Conclusions: Surface treatment with air-abrasion produced the lowest microleakage scores, independent of the adhesive systems and the pre-existing resin composite type. Pre-existing composite type does not affect the microleakage issue. All-in-one adhesive resin (BeautiBond) may not be preferred in resin composite repair in terms of microleakage prevention.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Guggenbühl, Simon, Abdulmonem Alshihri, Nadin Al-Haj Husain und Mutlu Özcan. „Adhesion of Resin-Resin and Resin–Lithium Disilicate Ceramic: A Methodological Assessment“. Materials 14, Nr. 14 (11.07.2021): 3870. http://dx.doi.org/10.3390/ma14143870.

Der volle Inhalt der Quelle

Annotation:

The aim of this study was to evaluate four test methods on the adhesion of resin composite to resin composite, and resin composite to glass ceramic. Resin composite specimens (N = 180, Quadrant Universal LC) were obtained and distributed randomly to test the adhesion of resin composite material and to ceramic materials (IPS e.max CAD) using one of the four following tests: (a) Macroshear SBT: (n = 30), (b) macrotensile TBT: (n = 30), (c) microshear µSBT: (n = 30) and (d) microtensile µTBT test (n = 6, composite-composite:216 sticks, ceramic-composite:216 sticks). Bonded specimens were stored for 24 h at 23 °C. Bond strength values were measured using a universal testing machine (1 mm/min), and failure types were analysed after debonding. Data were analysed using Univariate and Tukey’s, Bonneferroni post hoc test (α = 0.05). Two-parameter Weibull modulus, scale (m), and shape (0) were calculated. Test method and substrate type significantly affected the bond strength results, as well as their interaction term (p < 0.05). Resin composite to resin composite adhesion using SBT (24.4 ± 5)a, TBT (16.1 ± 4.4)b and µSBT (20.6 ± 7.4)a,b test methods presented significantly lower mean bond values (MPa), compared to µTBT (36.7 ± 8.9)b (p < 0.05). When testing adhesion of glass ceramics to resin composite, µSBT (6.6 ± 1)B showed the lowest and µTBT (24.8 ± 7)C,D the highest test values (MPa) (SBT (14.6 ± 5)A,D and TBT (19.9 ± 5)A,B) (p < 0.05). Resin composite adhesion to ceramic vs. resin composite did show significant difference for the test methods SBT and µTBT (resin composite (24.4 ± 5; 36.7 ± 9 MPa) vs. glass ceramic (14.6 ± 5; 25 ± 7 MPa)) (p > 0.05). Among substrate–test combinations, Weibull distribution presented the highest shape values for ceramic–resin in µSBT (7.6) and resin–resin in µSBT (5.7). Cohesive failures in resin–resin bond were most frequently observed in SBT (87%), followed by TBT (50%) and µSBT (50%), while mixed failures occurred mostly in ceramic–resin bonds in the SBT (100%), TBT (90%), and µSBT (90%) test types. According to Weibull modulus, failure types, and bond strength, µTBT tests might be more reliable for testing resin-based composites adhesion to resin, while µSBT might be more suitable for adhesion testing of resin-based composites to ceramic materials.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Al-Haj Husain, N., A. Alshihri und M. Özcan. „Adhesion of resin–resin and resin–lithium-disilicate ceramic: A methodological assessment“. Dental Materials 33 (2017): e61-e62. http://dx.doi.org/10.1016/j.dental.2017.08.122.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Bayraktar, Ezgi T., Pinar Y. Atali, Bora Korkut, Ezgi G. Kesimli, Bilge Tarcin und Cafer Turkmen. „Effect of Modeling Resins on Microhardness of Resin Composites“. European Journal of Dentistry 15, Nr. 03 (26.05.2021): 481–87. http://dx.doi.org/10.1055/s-0041-1725577.

Der volle Inhalt der Quelle

Annotation:

Abstract Objectives This study was aimed to determine the effects of modeling resins on the surface microhardness of composites. Materials and Methods Six resin-based composites (Charisma Smart, Estellite Asteria, CeramX-One SphereTEC, Admira Fusion, Filtek Ultimate, and Clearfil Majesty Es-2) and three wetting agents (Modeling Liquid, Composite Primer, and Modeling Resin) were investigated. In all, 240 specimens were prepared, and wetting agents were applied prior to light curing in the experimental groups. After 24 hours, specimens were polished and Vickers microhardness (VHN) values were measured. Statistical Analysis Shapiro–Wilk and two-way analysis of variance (ANOVA) were used for analyses (p < 0.05). Results Both modeling resin and composites were determined to be effective factors (p < 0.001). The control group showed the highest VHN (70.37 ± 7.94), followed by Modeling Liquid (64.68 ± 12.07), Composite Primer (59.84 ± 6.33), and Modeling Resin (58 ± 3.52b; p < 0.001). Filtek Ultimate showed the highest VHN (76.62 ± 9.78c), whereas Charisma Smart (58.87 ± 7.95), and Clearfil Majesty (67.27 ± 2.58) showed the lowest (p < 0.001). Clearfil Majesty–Modeling Liquid (46.62 ± 5.33) and Charisma Smart–Composite Primer (50.81 ± 0.39) combinations showed the lowest VHN, whereas Filtek Ultimate–control (87.15 ± 2.12) and Filtek Ultimate–Modeling Liquid (84.24 ± 3.11) showed the highest (p < 0.001). Conclusion All tested modeling resins decreased VHN value, and the amount of reduction varied among composites and wetting agents. It might be safer not to use wetting agents unless they are necessary.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Kittichaisri, Apiruck. „Development of resin monomers in resin composites“. Chulalongkorn University Dental Journal 35, Nr. 1 (Januar 2012): 65–78. http://dx.doi.org/10.58837/chula.cudj.35.1.6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

ISHII, Toshiaki, Shuji EGUCHI, Masatugu OGATA, Teruo KITAMURA und Hiroshi SUZUKI. „Modification of Epoxy Resins by Resol Type Phenolic Resin.“ KOBUNSHI RONBUNSHU 49, Nr. 8 (1992): 671–76. http://dx.doi.org/10.1295/koron.49.671.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Zoumpoulakis, L., und J. Simitzis. „Ion exchange resins from phenol/formaldehyde resin-modified lignin“. Polymer International 50, Nr. 3 (2001): 277–83. http://dx.doi.org/10.1002/pi.621.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Spalding, Mark A., Qian Gou, Xiaofei Sun und Qing Shi. „The incumbent resin effect for single-screw extrusion of polyethylene resins: The effect of resin changeover on gels in the product“. Journal of Plastic Film & Sheeting 34, Nr. 4 (11.12.2017): 382–93. http://dx.doi.org/10.1177/8756087917746455.

Der volle Inhalt der Quelle

Annotation:

Innovative polyethylene films are constantly being developed by switching the existing or incumbent resin with a new or challenger resin. If the extrusion equipment is designed properly, the film with the challenger resin will be acceptable for further testing and marketing. However, if the extrusion equipment is not designed properly, old degraded material from the incumbent resin will be pushed out of the extruder by the challenger resin, contaminating the test film. In many cases, the challenger resin is incorrectly blamed for the gels. This paper describes the incumbent resin effect, presents a case study, and provides technical solutions.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Surekha, B., D. Hanumantha Rao, G. Krishna Mohan Rao, Pandu R. Vundavilli und M. B. Parappagoudar. „Modeling and Analysis of Resin Bonded Sand Mould System Using Design of Experiments and Central Composite Design“. Journal for Manufacturing Science & Production 12, Nr. 1 (01.04.2012): 31–50. http://dx.doi.org/10.1515/jmsp-2012-0003.

Der volle Inhalt der Quelle

Annotation:

AbstractIn this paper an attempt has been made for linear and non linear modeling of resin bonded sand mould system using full factorial design of experiments and response surface methodology, respectively. It is important to note that the quality of castings produced using the resin bonded sand mould system depends largely on properties of moulds, which are influenced by the characteristics of sand, like type of sand, grain fineness number, grain size distribution and quantity and type of resin, catalyst, curing time etc. In the present study, percentage of resin, percentage of hardener, number of strokes and curing time are considered as input parameters and the mould properties, such as compression strength, shear strength, tensile strength and permeability are treated as responses. In the present work, phenol formaldehyde is used as the resin whereas tetrahydrophthalic anhydride as the hardener. A two level full factorial and three level central composite designs are utilized to develop input-output relationships. Surface plots and main effects plots are used to study the effects of amount of resign, amount of hardener, number of strokes and curing time on the responses, namely, compression strength, tensile strength, shear strength and permeability. Moreover, the adequacies of the developed models have been tested using analysis of variance. The prediction accuracy of the developed models have been tested with the help of twenty test cases and found reasonably good accuracy.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

G, Gautam. „Enamel demineralization with resin modified gic and conventional composite resin - a comparative in vivo study“. Journal of Oral Health and Craniofacial Science 2, Nr. 3 (2017): 069–79. http://dx.doi.org/10.29328/journal.johcs.1001014.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Koyanagi, Wataru. „Resin Concrete“. Concrete Journal 31, Nr. 4 (1993): 5–13. http://dx.doi.org/10.3151/coj1975.31.4_5.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

SAITO, Ryo. „Styrenic Resin“. NIPPON GOMU KYOKAISHI 80, Nr. 8 (2007): 292–96. http://dx.doi.org/10.2324/gomu.80.292.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

HIGUCHI, Koichi. „Silicone Resin“. Journal of the Japan Society of Colour Material 95, Nr. 2 (20.02.2022): 34–38. http://dx.doi.org/10.4011/shikizai.95.34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

HATTORI, Takenao, und Hiroshi SAKAMOTO. „Acrylic Resin“. Journal of the Japan Society of Colour Material 64, Nr. 7 (1991): 471–77. http://dx.doi.org/10.4011/shikizai1937.64.471.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Hamilton, James C. „RESIN RESTORATIONS“. Journal of the American Dental Association 128, Nr. 8 (August 1997): 1062–64. http://dx.doi.org/10.14219/jada.archive.1997.0342.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Fujita, Yasuhiro, und Yoshihisa Ushida. „Thermoplastic resin.“ Kobunshi 34, Nr. 5 (1985): 394–97. http://dx.doi.org/10.1295/kobunshi.34.394.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Inoue, Kazuo. „Polyimide resin.“ Kobunshi 39, Nr. 2 (1990): 104–5. http://dx.doi.org/10.1295/kobunshi.39.104.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Abemayor, Elie M., Elizabeth H. Weinshel und David B. Falkenstein. „Resin residue“. Gastrointestinal Endoscopy 36, Nr. 3 (Mai 1990): 317. http://dx.doi.org/10.1016/s0016-5107(90)71041-3.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Li, Qi, Xiaosheng Liu, Huidong Su, An Mao und Hui Wan. „Development of a Renewable Hybrid Resin System by Blending Isocyanate with Novolac Phenolic Resins“. Forest Products Journal 70, Nr. 3 (01.01.2020): 268–74. http://dx.doi.org/10.13073/fpj-d-20-00022.

Der volle Inhalt der Quelle

Annotation:

Abstract The objective of this study was to develop a performance-competitive bio-based hybrid resin system composed of methylene diphenyl diisocyanate (MDI) resin and novolac phenol-formaldehyde (PF) resin for engineered wood panel manufacturing. A novolac PF resin and a bio-oil–modified PF resin were blended with MDI at weight ratios of PF to MDI of 85:15, 75:25, 50:50, and 25:75, respectively. The obtained hybrid resins were examined with Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA), and evaluated as plywood binders. The results indicated that the gel times and viscosities of hybrid resins were closely related to the weight ratio of PF resin to MDI. At a ratio lower than 75:25, the viscosities of hybrid resins were appropriate for plywood application. FTIR results showed some reactions between the novolac PF resin and MDI. TGA results showed that reacting novolac PF resin with MDI resin possibly increased the thermal stabilities of hybrid resins in the temperature range of 150°C to 300°C. Panel performance tests showed that blending novolac PF resin with MDI increased both the dry and the wet bonding strength of panels at the optimal ratio of 50:50. Replacing phenol with bio-oil of the hybrid resin had the trend of reducing the hybrid resin gel time and increasing panel dry and wet bonding strength.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

AIDA, Masahiro, Hideo KANAYA, Yoshizumi MURATA, Tohru HAYAKAWA und Kozo HORIE. „Adhesion between the Resin Shell and Composite Resin.“ Journal of Nihon University School of Dentistry 34, Nr. 3 (1992): 167–71. http://dx.doi.org/10.2334/josnusd1959.34.167.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Liang, Guozheng, und Dong Wang. „High-performance bismaleimide resin for resin film infusion“. Polymer-Plastics Technology and Engineering 41, Nr. 2 (26.04.2002): 285–95. http://dx.doi.org/10.1081/ppt-120002569.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Antonucci, V., M. Giordano, L. Nicolais, A. Calabrò, A. Cusano, A. Cutolo und S. Inserra. „Resin flow monitoring in resin film infusion process“. Journal of Materials Processing Technology 143-144 (Dezember 2003): 687–92. http://dx.doi.org/10.1016/s0924-0136(03)00338-8.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Moraes, R. R., L. S. Gonçalves, A. C. Lancellotti, S. Consani, L. Correr-Sobrinho und M. A. Sinhoreti. „Nanohybrid Resin Composites: Nanofiller Loaded Materials or Traditional Microhybrid Resins?“ Operative Dentistry 34, Nr. 5 (01.09.2009): 551–57. http://dx.doi.org/10.2341/08-043-l.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Borges, Alessandra Buhler, Carlos Rocha Gomes Torres, Graziela Ribeiro Batista, Eduardo Bresciani, Erica Crastechini und Rayssa Ferreira Zanatta. „Bond Strength of Reline Resins to Aged-simulated Denture Base Acrylic Resin“. World Journal of Dentistry 7, Nr. 1 (2016): 1–5. http://dx.doi.org/10.5005/jp-journals-10015-1353.

Der volle Inhalt der Quelle

Annotation:

ABSTRACT Objectives The aim of this study was to evaluate the bond strength of different direct reliners to acrylic resin for denture base. Materials and methods Double-cone specimens were made: HA-heat-cured acrylic resin-(n = 20); U-Ufi Gel Hard C-(n = 10); K: Kooliner-(n = 10); R-Rebase II Fast-(n = 10) and RH-Rebase II Fast + Resin Hardener-(n = 10). Ten HA samples were immediately submitted to cohesive test. The remaining HA samples and others were submitted to thermal aging (HAaged, 1000 cycles, 5.55oC), followed by tensile test. For tensile strength, 50 single cone-shaped samples were made of heat-cured acrylic resin and aged (HAaged, 1000 cycles, 5.55oC). After surface treatment, relining resin cones were build up using silicon molds, and stressed to failure. Values of cohesive and tensile strength were submitted to one-way ANOVA and Tukey's test (α = 5%). Results Bond strength were: HA/HAaged: 21.17 (Â±4.89)a, U/HAaged: 11.56 (Â±1.98)b, R/HAaged: 9.69 (Â±2.37)b, RH/ HAaged: 9.38 (Â±1.78)bc and K/HAaged: 5.98 (Â±1.90)c. The cohesive strength were: KCoe: 22.29(Â±4.06)a; RCoe: 23.99 (Â±3.29)a; RHCoe: 24.84 (Â±3.88)a; UCoe: 25.62 (Â±3.03)a; HAaged: 36.06 (Â±8.65)b and HA:42.29 (Â±7.68)b. Groups followed by the same letters do not show differences. Conclusion Bond strength of acrylic resin to acrylic denture base material is higher than the reliners and Ufi Gel Hard C showed the higher bond strength. How to cite this article Zanatta RF, Batista GR, Crastechini É, Bresciani E, Borges AB, Torres CRG. Bond Strength of Reline Resins to Aged-simulated Denture Base Acrylic Resin. World J Dent 2016;7(1):1-5.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Lim, Na-Kyung, und Soo-Yeon Shin. „Bonding of conventional provisional resin to 3D printed resin: the role of surface treatments and type of repair resins“. Journal of Advanced Prosthodontics 12, Nr. 5 (2020): 322. http://dx.doi.org/10.4047/jap.2020.12.5.322.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Liu, Pin, Xiongmin Liu, Tei Saburi, Shiro Kubota, Pinxian Huang und Yuji Wada. „Thermal Stability Evaluation of Resin Acids and Rosin Modified Resins“. ACS Omega 5, Nr. 45 (03.11.2020): 29102–9. http://dx.doi.org/10.1021/acsomega.0c03736.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Hegemann, Günter. „Low viscous unsaturated polyester resin for monomer free UP-resins“. Macromolecular Symposia 199, Nr. 1 (Oktober 2003): 333–42. http://dx.doi.org/10.1002/masy.200350928.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Walraven, G. B., D. A. Cunha, L. C. Souza, V. P. A. Saboia und N. S. Rodrigues. „Desempenho Clínico de Restaurações Diretas com Resinas Compostas Bulk Fill em Dentes Posteriores: Revisão da Literatura“. Journal of Health Sciences 19, Nr. 5 (23.02.2018): 93. http://dx.doi.org/10.17921/2447-8938.2017v19n5p93.

Der volle Inhalt der Quelle

Annotation:

O objetivo do presente trabalho foi realizar uma revisão de literatura avaliando o desempenho clínico de restaurações diretas com resinas compostas bulk fill em comparação com as resinas compostas convencionais. Foi realizada uma seleção de artigos científicos nas bases de dados Pubmed e Periódicos Capes/MEC, utilizando os descritores bulk fill resin composite and clinical evaluation, bulk fill resin composite and clinical study e bulk fill resin composite and clinical trial. Foram encontrados sete artigos científicos, correlacionados com ensaio clínico randomizado, publicados entre os anos de 2014 e 2017, dos quais apenas seis foram selecionados. De acordo com esta revisão, a resina bulk fill de baixa viscosidade se mostrou clinicamente melhor que a resina convencional no período de avaliação clínica de um a três anos, para o critério de retenção. Quando avaliada após cinco anos de acompanhamento clínico, mostrou-se com boa durabilidade, porém estatisticamente semelhante às convencionais. Já as resinas compostas bulk fill de alta viscosidade se mostraram tão eficazes quanto às convencionais de acordo com os critérios USPHS (United States Public Health Service) após 12 meses. Além disso, a técnica de aplicação utilizando a vibração sônica não se mostrou estatisticamente superior. Portanto, a utilização de resinas bulk fill, em restaurações diretas de dentes posteriores, apresentou desempenho clínico satisfatório, além da vantagem do menor tempo clínico requerido.Palavras-chave: Resinas Compostas. Restauração Dentária Permanente. Estudo Clínico.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Yang, Huanxin, Junjie Shi, Lin Chen, Chunwang Yang, Changzhao Li, Yuxi Huang und Jian Qiu. „A Study of the Effects of Stimulants on Resin Yield, Resin Duct and Turpentine Chemical Composition in Pinus kesiya var. langbianensis“. Forests 15, Nr. 5 (25.04.2024): 748. http://dx.doi.org/10.3390/f15050748.

Der volle Inhalt der Quelle

Annotation:

This study presents a comprehensive examination of Pinus kesiya var. langbianensis (Pinus kesiya var. langbianensis), the primary resin-extraction tree species in Yunnan Province, China. In this study, we formulated different concentration gradients of 0.25%, 0.5%, 1%, and 2% of diquat solution as tapping stimulant to test the effect of different concentrations on the resin gain rate of Pinus kesiya, and analyzed the relationship between anatomical structure, major chemical composition of turpentine and resin yield by methods such as wood anatomy and chemical composition analysis of turpentine. The primary focus of the investigation was on exploring the interrelationships among resin-tapping stimulants, anatomical structures, turpentine components, and resin yield. Research findings demonstrate a significant enhancement in resin production due to the application of stimulants, with the highest increase rate reaching 55% in a specific group, while others achieved approximately 30% increments. Moreover, measurement data about resin duct dimensions indicate a noteworthy increase in resin duct area for the stimulant-treated group compared to the control group. However, it should be noted that the impact on resin duct area by varying stimulant concentrations was relatively minor. Furthermore, continuous observation of resin extraction from different resin-yield classes of P. kesiya revealed insignificant variation in resin yield over time for the low and moderate resin-yield groups. In contrast, the high resin-yield group exhibited a gradual increase in resin production. Interestingly, the high resin-yield group exhibited the smallest resin duct area, but the highest resin duct density, indicating an interconnectedness of resin duct-related data that influences resin yield. Additionally, correlative investigations between anatomical structures and resin yield demonstrate a positive correlation between resin duct area and resin yield, total resin production, and average resin yield. This underscores the importance of resin duct area as a significant factor in resin production. On the other hand, the influence of stimulant concentrations on the turpentine components was found to be negligible. Overall, the correlation results suggest that turpentine components cannot reliably predict or differentiate between high and low resin-yield trees. This study provides a comprehensive analysis of the interrelationships among stimulants, anatomical structures, and turpentine components, offering a theoretical foundation for the resin extraction and resin processing industries in Yunnan Province.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Cunha, Leonardo Fernandes da, Samantha Schaffer Pugsley Baratto, Carla Castiglia Gonzaga und Gisele Maria Correr. „Low shrinkage composite resins and occlusal matrix technique: association for direct extensive resin restoration“. Revista Odonto Ciência 32, Nr. 4 (25.07.2018): 213. http://dx.doi.org/10.15448/1980-6523.2017.4.27253.

Der volle Inhalt der Quelle

Annotation:

INTRODUCTION: Ensuring adequate occlusal contacts and anatomy shape and form is always a challenge when placing extensive direct posterior composite resin restorations. The use of a correct technique, such as, an occlusal matrix can reproduce occlusal morphology more precisely. Additionally, recently, silorane-based or bulk fill composite resin present low shrinkage and were specifically designed for restoring posterior teeth.CASE REPORT: This report presents the clinical application of a low shrinkage composite resin system with a preoperative occlusal matrix in extensive composite resin restoration of a molar with hypomineralization. Acrylic resin was applied over the waxed tooth to copy the anatomic details. Cavity was prepared and bonding system was applied. Definitive layer in the occlusal matrix was applied and stabilized in position. Once curing was complete, occlusal matrix and resin excess were removed using a surgical blade.CONCLUSION: The application of these materials with occlusal matrix can provide a simpler technical approach, saving time and improving esthetic results.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

SEVMEZ, Hatice, Merve BANKOĞLU GÜNGÖR und Handan YILMAZ. „Resin Matrix Ceramics“. Turkiye Klinikleri Journal of Dental Sciences 25, Nr. 3 (2019): 351–59. http://dx.doi.org/10.5336/dentalsci.2017-58961.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

MAGALHÃES, Gabriel, Roberto GÓES und Fernando NASCIMENTO. „A Competência Do Reparo Em Resina Composta“. Revista de Odontologia Contemporânea 4, Nr. 2sup2 (17.12.2020): 3. http://dx.doi.org/10.31991/v4n2sup22020rocjofpmreparo.

Der volle Inhalt der Quelle

Annotation:

Introdução: Habitualmente a conduta tradicional ideal para tratar restaurações compostas insatisfatórias seria a substituição, entretanto, reparo em resina coparticipa da concepção odontológica de “intervenção mínima”. Objetivo: Aprofundar no assunto e avaliar desempenho do reparo (com resina composta) no manuseio em restaurações dentárias de resina composta defeituosa. Metodologia: Foi realizado uma busca em artigos na base de dados PubMed no período 2010 a 2019, com as palavras-chaves “composite resin”,“resin repair” e “microleakage dental”. Discussão: O reparo de restaurações parcialmente defeituosas foi extensivamente estudado e está crescendo na rotina clínica como uma abordagem alternativa. Destaca-se por limitar os riscos de lesões pulpares e preservar as estruturas dentais, minimiza apreensão dos pacientes quanto a dor, ansiedade, tempo e custo. Empecilho para um analise mais fluente são as inúmeras variações nas condições de estudo, por exemplo, diferentes condições de envelhecimento ou tratamentos de superfície adesiva. Materiais, marcas, condicionamento e outros vários fatores influenciam no resultado do reparo, contudo, estudos com resultados em acompanhamento sugerem que o reparo apresenta tanta eficácia quanto a substituição total de restaurações de resina com infiltrações. Conclusão: A proporção desse estudo pode levar a influenciar no financiamento dos dentistas na escolha entre a substituição e o reparo das restaurações.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Wada, Masayuki. „Adsorption of Proteins on Composite Resin and Acrylic Resin“. Journal of the Kyushu Dental Society 42, Nr. 1 (1988): 165–76. http://dx.doi.org/10.2504/kds.42.165.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

URANO, Akihiro, Akihiro WADA, Hiroya YAMAMOTO und Yoshimichi FUJII. „Ultrasonic Testing of Resin Impregnation in Resin Transfer Molding“. Proceedings of Mechanical Engineering Congress, Japan 2019 (2019): J04308P. http://dx.doi.org/10.1299/jsmemecj.2019.j04308p.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Hooi, P., O. Addison und G. J. P. Fleming. „Quantifying ceramic resin strengthening by varying the resin elasticity“. Dental Materials 25, Nr. 5 (Mai 2009): e5. http://dx.doi.org/10.1016/j.dental.2009.01.008.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Aramaki, O., R. Takahashi, T. Wada, M. Uo und J. Tagami. „Bonding property of resin cement to composite resin crown“. Dental Materials 31 (2015): e21. http://dx.doi.org/10.1016/j.dental.2015.08.049.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Eiriksson, Sigurdur O., Patricia N. R. Pereira, Edward J. Swift, Harald O. Heymann und Asgeir Sigurdsson. „Effects of saliva contamination on resin–resin bond strength“. Dental Materials 20, Nr. 1 (Januar 2004): 37–44. http://dx.doi.org/10.1016/s0109-5641(03)00066-6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Eiriksson, S. „Effects of blood contamination on resin–resin bond strength“. Dental Materials 20, Nr. 2 (01.02.2004): 184–90. http://dx.doi.org/10.1016/s0109-5641(03)00090-3.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Kimura, Hajime, Keiko Ohtsuka und Akihiro Matsumoto. „New Thermosetting Resin from Benzoxazine and Cyanate Ester Resin“. Advances in Polymer Technology 32, S1 (31.08.2012): E651—E659. http://dx.doi.org/10.1002/adv.21308.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Liang, Guozheng, und Dong Wang. „High-performance bismaleimide resin film for resin film infusion“. Journal of Applied Polymer Science 81, Nr. 12 (2001): 2918–22. http://dx.doi.org/10.1002/app.1741.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

El-Sayed, Mohamed S., Omaima H. Gallab und Farid S. El-Askary. „Resin Composites-to-Resin Based Lining Materials Bond Strength“. Ain Shams Dental Journal 21, Nr. 2 (Juni 2018): 319–26. http://dx.doi.org/10.12816/0056709.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!