Auswahl der wissenschaftlichen Literatur zum Thema „Remelting process“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Remelting process" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Remelting process"
Mróz, M., W. Orłowicz und M. Tupaj. „Geometry of Remeltings and Efficiency of the Surface Remelting Process Applied to Cobalt Alloy Castings“. Archives of Foundry Engineering 13, Nr. 2 (01.06.2013): 95–98. http://dx.doi.org/10.2478/afe-2013-0044.
Der volle Inhalt der QuelleTrytek, Andrzej Stanisław, Mirosław Tupaj, Ján Majerník, Štefan Gašpár, Wiktoria Zbyrad-Kołodziej und Karol Łysiak. „Surface Remelting of Mold Inserts Made of NC11 Steel“. Journal of Casting & Materials Engineering 4, Nr. 1 (31.03.2020): 9–15. http://dx.doi.org/10.7494/jcme.2020.4.1.9.
Der volle Inhalt der QuelleArh, Boštjan, Bojan Podgornik und Jaka Burja. „Electroslag remelting: A process overview“. Materiali in tehnologije 50, Nr. 6 (12.12.2016): 971–79. http://dx.doi.org/10.17222/mit.2016.108.
Der volle Inhalt der QuelleDing, Wan Wu, Jiang Tao Zhu, Wen Jun Zhao und Tian Dong Xia. „Microstructure Evolution of Al-Ti-C Alloy Wires during Remelting Process“. Advanced Materials Research 652-654 (Januar 2013): 1119–23. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.1119.
Der volle Inhalt der QuelleŠturm, Roman, und Janez Grum. „Influence of Laser Remelting Process on Strain and Residual Stresses in Nodular Iron“. Materials Science Forum 681 (März 2011): 188–93. http://dx.doi.org/10.4028/www.scientific.net/msf.681.188.
Der volle Inhalt der QuelleYi, Rong Xi, Xiao Qiu Zheng, Shi Kun Xie und Xiu Yan Guo. „Study on the Remelting Process of Rare Earth Al-4.5Cu“. Applied Mechanics and Materials 66-68 (Juli 2011): 1854–57. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.1854.
Der volle Inhalt der QuelleGuo, Hua Feng, Tao Sun, Zhi Li und Ju Li Li. „Influence of Process Parameters on Temperature Field in Laser Remelting Coating Prepared by Plasma Spraying on Titanium Alloy Surface“. Applied Mechanics and Materials 197 (September 2012): 802–7. http://dx.doi.org/10.4028/www.scientific.net/amm.197.802.
Der volle Inhalt der QuelleINOUYE, Michio. „Present Status of Electroslag Remelting Process“. Tetsu-to-Hagane 73, Nr. 2 (1987): 233–41. http://dx.doi.org/10.2355/tetsutohagane1955.73.2_233.
Der volle Inhalt der QuelleDONG, Yan-wu, Zhou-hua JIANG und Zheng-bang LI. „Mathematical Model for Electroslag Remelting Process“. Journal of Iron and Steel Research, International 14, Nr. 5 (September 2007): 7–30. http://dx.doi.org/10.1016/s1006-706x(07)60065-x.
Der volle Inhalt der QuelleDong, Yan-wu, Zhou-hua Jiang und Zheng-bang Li. „Mathematical Model for Electroslag Remelting Process“. Journal of Iron and Steel Research International 14, Nr. 5 (Mai 2007): 7–12. http://dx.doi.org/10.1016/s1006-706x(08)60042-4.
Der volle Inhalt der QuelleDissertationen zum Thema "Remelting process"
Hernández-Morales, José Bernardo. „Electromagnetic stirring with alternating current during electroslag remelting“. Thesis, University of British Columbia, 1988. http://hdl.handle.net/2429/28385.
Der volle Inhalt der QuelleApplied Science, Faculty of
Materials Engineering, Department of
Graduate
Wani, Nitin Yashwant. „Simulation of thermal stresses in vacuum arc remelting process“. Ohio : Ohio University, 1995. http://www.ohiolink.edu/etd/view.cgi?ohiou1178820121.
Der volle Inhalt der QuellePolton, Richard. „Numerical grid generation and its application in the solution of a model of the Vacuum-Arc Remelting (VAR) process“. Thesis, University of Southampton, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323918.
Der volle Inhalt der QuelleMUCSI, CRISTIANO S. „Estudo sobre o processo V.A.R. (Vacuum Arc Remelting) escala de laboratorio“. reponame:Repositório Institucional do IPEN, 1996. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10472.
Der volle Inhalt der QuelleMade available in DSpace on 2014-10-09T14:06:54Z (GMT). No. of bitstreams: 1 02949.pdf: 9168361 bytes, checksum: 474a2e1dcf103e26b6863b7d40ff33a1 (MD5)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Décultot, Léa. „Étude et modélisation du procédé de refusion par plasma d’arc en creuset froid (PAMCHR) d’alliages de titane pour des applications aéronautiques“. Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0031.
Der volle Inhalt der QuelleThe recycling of titanium scraps can be achieved using the Plasma Arc Melting Cold Hearth Refining (PAMCHR) process with the aim of producing aeronautical titanium alloy ingots. In this manuscript, the research work focuses on the refining stage of the process where the liquid is transported in a horizontal copper water-cooled crucible. This important step takes place downstream the melting of the charge and upstream the casting of liquid titanium into the ingot mold crucible. Plasma torches are used as heat source of PAMCHR process, which is conducted under an atmosphere of inert gas. A three-dimensional modeling of the thermo-hydrodynamic flow of the titanium alloy has been set up based on Ansys-Fluent CFD software. The purpose of this tool, named PAM3D, is to improve our understanding of the liquid titanium behavior within the refining crucible. A large number of user functions have been integrated into the model to describe, among other mechanisms, the thermal and momentum transferred from the plasma plume to the surface of the liquid bath. The analysis of these transfers is essential for modeling the process. They are obtained by a study coupling melting tests, carried out in a pilot PAMCHR furnace, and numerical modeling. Numerical results, obtained by this first version of PAM3D are compared to experimental measurements, and the agreement is satisfactory. However, the maximum value of the shear stress, due to the impact of the plasma plume on the bath surface, implemented in the model seems to be underestimated. Moreover, complementary simulations highlight the important role of hydrodynamic forces on the thermal behavior of the bath, and in particular of this shear stress
Souza, Edvaldo Roberto de. „Caracterizações microestruturais e avaliações das propriedades mecânicas das juntas em aço inoxidável AISI 301 L soldadas por MIG e submetidas ao reparo pelo processo TIG“. Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-22082016-143920/.
Der volle Inhalt der QuelleThe welding has great importance in manufacture of subway cars because it is used in the manufacture of structural components and finishing in passenger cars which are mostly stainless steel. Joints may show the presence of discontinuities. The discontinuities are interruptions that affect the mechanical and metallurgical properties of the weld. The presence of these discontinuities, depending on their size, nature or the combined effect may lead to failure of the weld either by reduction of mechanical properties or non-acceptance criteria established in standards. A structure that has a weld failed during its qualification or inspection by the presence of discontinuities can be retrieved through a rework to be done in this joint. The remelting of the weld using the TIG process without the use of additional material, rework is a technique that can be employed in particular the technical and economic feasibility of the process. This study analyzes the influence that the process of TIG welding rework has on mechanical behavior and microstructure of welded joints by means of: mechanical tests (tensile and Vickers hardness), non-destructive testing (visual inspection and liquid penetrant) and characterization microstructure of the weld. Results of tensile test specimens and fatigue indicated that the repair of the weld beads did not change the mechanical behavior of joints. The joints subjected to repair in which they were removed the ribs of the beads showed changes in the mechanical properties, but also had satisfactory results.
Hroš, Michal. „Optimalizace podmínek dvojitého přetavení elektronovým paprskem v procesu přípravy TBC povlaků“. Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400832.
Der volle Inhalt der QuelleAhn, Seokyoung Beaman Joseph J. „Modeling, estimation, and control of electroslag remelting process“. 2005. http://repositories.lib.utexas.edu/bitstream/handle/2152/1494/ahns17441.pdf.
Der volle Inhalt der QuelleAhn, Seokyoung. „Modeling, estimation, and control of electroslag remelting process“. Thesis, 2005. http://hdl.handle.net/2152/1494.
Der volle Inhalt der QuelleXIE, JUN-JIE, und 謝俊傑. „Study on die- casting die service life improvement by laser-remelting process“. Thesis, 2018. http://ndltd.ncl.edu.tw/handle/2bpccz.
Der volle Inhalt der Quelle國立中央大學
機械工程學系在職專班
107
High pressure die-casting is one of the most widely used and important manufacturing method in modern industry, but the working environment is often dangerous, hard and dirty due to its high temperature and high noise. This is the reason why fewer people are willing to devote themselves to the job, and furthermore, most of researches about high pressure die-casting is academic study. One of the most important problem in the die-casting process is die service life improvement, and the problem affects not only capacity of production but also quality. In this paper, die- casting die service life improvement by laser-remelting process is investigated. In the view of microstructure, the main cause of thermal fatigue crack of die-casting die and inhibiting the propagation of the crack is discussed. Finally, finding the high-risk region where thermal fatigue crack occurs is worked out by the application of CAE(Computer Aided Engineering) technology.
Bücher zum Thema "Remelting process"
Engh, Thorvald Abel, Geoffrey K. Sigworth und Anne Kvithyld. Principles of Metal Refining and Recycling. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198811923.001.0001.
Der volle Inhalt der QuelleBuchteile zum Thema "Remelting process"
Li, Jing, und Chengbin Shi. „Carbides Control in Electroslag Remelting Process“. In Carbide in Special Steel, 59–108. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1456-9_2.
Der volle Inhalt der QuelleKharicha, A., A. Ludwig und M. Wu. „3D Simulation of the Melting during an Electro-Slag Remelting Process“. In EPD Congress 2011, 770–78. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495285.ch84.
Der volle Inhalt der QuelleWang, Qiang, Zhu He und Baokuan Li. „Modeling of Magnetohydrodynamic, Thermal and Solidified Behavior in Electroslag Remelting Process“. In EPD Congress 2014, 409–15. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118889664.ch49.
Der volle Inhalt der QuelleZhuo, Y., X. F. Yin und D. M. Yang. „The Damage of the SiC/Al Preform Wire During Remelting Process“. In Controlled Interphases in Composite Materials, 277–83. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-7816-7_27.
Der volle Inhalt der QuellePericleous, Koulis, Georgi Djambazov, Mark Ward, Lang Yuan und Peter D. Lee. „A Multi-Scale 3D Model of the Vacuum Arc Remelting Process“. In Supplemental Proceedings, 291–98. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118357002.ch38.
Der volle Inhalt der QuelleBirol, Burak, und Muhlis Nezihi Saridede. „Recycling of High Quality Steel Scraps Directly in Electroslag Remelting Process (ESR)“. In EPD Congress 2011, 959–65. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495285.ch106.
Der volle Inhalt der QuelleKharicha, A., M. Wu und A. Ludwig. „Variation of the Resistance during the Electrode Movement in the Electroslag Remelting Process“. In Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting, 145–50. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch22.
Der volle Inhalt der QuelleKharicha, A., M. Wu und A. Ludwig. „Variation of the Resistance During the Electrode Movement in the Electroslag Remelting Process“. In Proceedings of the 2013 International Symposium on Liquid Metal Processing & Casting, 145–50. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48102-9_22.
Der volle Inhalt der QuelleZang, Ximin, Zhouhua Jiang, Hua Song, Fubin Liu, Xin Deng, Xu Chen und Chong Han. „A Study of Slag and Steel Leakage Influence Factors during Electroslag Remelting Withdrawing Process“. In Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting, 119–22. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch17.
Der volle Inhalt der QuellePatel, Ashish, David W. Tripp und Daniel Fiore. „Application of a Model for Simulating the Vacuum Arc Remelting Process in Titanium Alloys“. In Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting, 239–44. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch35.
Der volle Inhalt der QuelleKonferenzberichte zum Thema "Remelting process"
Derouet, H., L. Sabatier, F. Coste und R. Fabbro. „Process control applied to laser surface remelting“. In ICALEO® ‘97: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1997. http://dx.doi.org/10.2351/1.5059666.
Der volle Inhalt der QuelleFu, Yunchang, Dongxiong Ling, Bruno Martin und Junchang Li. „Finite-element modeling of laser remelting process“. In Photonics Asia 2002, herausgegeben von ShuShen Deng, Tatsuo Okada, Klaus Behler und XingZong Wang. SPIE, 2002. http://dx.doi.org/10.1117/12.482911.
Der volle Inhalt der QuelleSong, Jin-chun, Li-li Zhao und Hong-yi Liu. „State Estimate Based on Nonlinear Filter of ElectroSlag Remelting Process“. In 2008 Pacific-Asia Workshop on Computational Intelligence and Industrial Application (PACIIA). IEEE, 2008. http://dx.doi.org/10.1109/paciia.2008.12.
Der volle Inhalt der QuelleAhn, Seokyoung, Joseph J. Beaman, Rodney L. Williamson und David K. Melgaard. „Model-Based Control of Electroslag Remelting Process Using Unscented Kalman Filter“. In ASME 2008 Dynamic Systems and Control Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/dscc2008-2148.
Der volle Inhalt der QuelleSong, Jin-chun, Li-li Zhao und Hong-yi Liu. „Optimizing cooperative control based on genetic algorithm for electroSlag remelting process“. In 2008 IEEE Conference on Cybernetics and Intelligent Systems. IEEE, 2008. http://dx.doi.org/10.1109/iccis.2008.4670764.
Der volle Inhalt der QuelleHaferkamp, H., M. Goede und O. Thürk. „Short Time Process Observation During Laser Remelting of Aluminium Diecast Alloys“. In The European Conference on Lasers and Electro-Optics. Washington, D.C.: Optica Publishing Group, 1998. http://dx.doi.org/10.1364/cleo_europe.1998.cthh93.
Der volle Inhalt der QuelleCamila Almeida Martins und Jhon Jairo Ramirez-Behainne. „THERMAL CYCLING SIMULATION DURING REMELTING PROCESS OF THE STEEL ASTM A743-CA6NM“. In 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil: ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-1361.
Der volle Inhalt der QuelleLiao, Jiankan, Ashvin Sharma und Daniel Cooper. „The Effect of Composition, Geometry and a Novel Tool Design on Metal Recovery During Aluminum Process Scrap Remelting“. In ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-84900.
Der volle Inhalt der QuelleTian, Zongjun, Lida Shen, Zhidong Liu und Yinhui Huang. „Microstructure Characteristics and High-Temperature Oxidation Behavior of Plasma-Sprayed and Laser-Remelted MCrAlY Coatings on TiAl Intermetallics“. In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50145.
Der volle Inhalt der QuelleTanno, M., K. Ogawa, T. Shoji, S. O. Chwa und A. Ohmori. „Improvement of Bond Strength of Thermal Barrier Coatings by a Laser Remelting Process“. In ITSC2004, herausgegeben von Basil R. Marple und Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p1076.
Der volle Inhalt der Quelle