Zeitschriftenartikel: „Quality characteristic“

1

SINGH, RAJESH. „Variance Estimation Using Quality Characteristic“. Mathematical Journal of Interdisciplinary Sciences 5, Nr. 2 (05.03.2017): 143–49. http://dx.doi.org/10.15415/mjis.2017.52011.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Shelud'ko, Olga Nikolaevna, Natalia Mikhailovna Ageyeva, Tatiana Ivanovna Guguchkina, Boris Viktorovich Burtsev, Mikhail Viktorovich Antonenko, Svetlana Alexandrovna Biryukova und Yuriy Fiodorovich Yakubа. „CHARACTERISTIC OF QUALITY BRANDY DISHILLATES“. Fruit growing and viticulture of South Russia 2, Nr. 68 (16.03.2021): 232–41. http://dx.doi.org/10.30679/2219-5335-2021-2-68-232-241.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Wang, Dong Feng, Xiang Zhao Mao, Hong Lin und Chang Hu Xue. „Actualizing Quality Engineering, Constructing Characteristic Specialty“. Advanced Materials Research 634-638 (Januar 2013): 3877–82. http://dx.doi.org/10.4028/www.scientific.net/amr.634-638.3877.

Der volle Inhalt der Quelle

Annotation:

College of Food Science and Engineering of Ocean University of China grew out of the processing of aquatic food product of Shandong University. The specialty of food science and engineering was awarded national characteristic specialty at 2010. This paper suggests construction mentality and aims surrounding the national characteristic specialty.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Djordjevic, Nebojsa. „Usability: Key characteristic of software quality“. Vojnotehnicki glasnik 65, Nr. 2 (2017): 513–29. http://dx.doi.org/10.5937/vojtehg65-11028.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

PRALGAUSKAITĖ, SANDRA, VILIUS PALENSKIS, JONAS MATUKAS und AUGUSTINAS VIZBARAS. „NOISE CHARACTERISTIC AND QUALITY INVESTIGATION OF ULTRAFAST AVALANCHE PHOTODIODES“. Fluctuation and Noise Letters 07, Nr. 03 (September 2007): L379—L389. http://dx.doi.org/10.1142/s021947750700401x.

Der volle Inhalt der Quelle

Annotation:

A detailed study of photosensitivity and noise characteristics of ultrafast InGaAsP / InP avalanche photodiodes (APDs) with separate absorption, grading, charge and multiplication regions was carried out. Carrier multiplication and noise factors were evaluated. Noise origin in investigated APDs is 1/f, generation-recombination and shot noises. Different quality samples have been investigated and it is shown that noise characteristics well reflect APD quality problems. It is shown that low-frequency noise and excess shot noise characteristics are very sensitive to the APD quality problems and clear up physical processes in device structure. Noise characteristic analyses can be used for the APD quality problems revealing and optimal design development.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Shilpa, M., und N. V. R. Naidu. „Quantitative Evaluation of Quality Loss for Nominal-the-best Quality Characteristic“. Procedia Materials Science 5 (2014): 2356–62. http://dx.doi.org/10.1016/j.mspro.2014.07.479.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Koto, Arsat, Evanila Silvia und Kurnia Herlina Dewi. „CHARACTERISTIC OF LEMPOK QUALITY IN BENGKULU CITY“. Jurnal Agroindustri 5, Nr. 2 (28.11.2015): 128–33. http://dx.doi.org/10.31186/j.agroind.5.2.128-133.

Der volle Inhalt der Quelle

Annotation:

The aim of this study was to identify the quality characteristics of durian lempok in Bengkulu City and compare the quality characteristics lempok with SNI 01-4313-1996. The sample of lempok were taken from 2 home industries that the largest producer in Bengkulu City. The study was conducted three phases: 1) survey and interviews to determine the home industry with the largest production capacity in Bengkulu City, 2) random sampling in production at 3 times production; and 3) analysis of samples in terms of water content, the content of artificial sweeteners, TPC, texture, and pH. Data were analyzed descriptively. The results showed that the water content lempok durian on home industry A is 23% and B is 27%; artificial sweetener content between lempok is 0; TPC lempok is 63 x 105 colonies/g (A) and 116 x 105 colonies/g (B); lempok texture is 9.122 cm/10 g/10 s (A) and 8.955 cm/10 g/10 s (B) and pH of lempok 5.6 (A) and 5.4 (B). So the quality of durian in Bengkulu City lempok that achieve SNI No. 01-4313-1996 is an artificial sweetener content while the rest (moisture and TPC) does not achieve the standards.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Zeide, Boris. „Quality as a characteristic of ecological models“. Ecological Modelling 55, Nr. 3-4 (August 1991): 161–74. http://dx.doi.org/10.1016/0304-3800(91)90085-f.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Petersen, DR, RE Link, M. Divinsky, S. Nesichi und M. Livneh. „Optimal Quality Characteristic Evaluation for Asphalt Mixing Plants“. Journal of Testing and Evaluation 31, Nr. 1 (2003): 10453. http://dx.doi.org/10.1520/jte12349j.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Park, Dong Joon, Yeboon Yun, In Seon Kang, Eun Jae Yoo, Ho Gyun Kim und Min Yoon. „A Characteristic Analysis for Quality Competitiveness Excellent Company“. Journal of Society of Korea Industrial and Systems Engineering 42, Nr. 3 (30.09.2019): 95–108. http://dx.doi.org/10.11627/jkise.2019.42.3.108.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Ma, Shuang, Songning Zhao, Yan Zhang, Yiding Yu, Jingbo Liu und Menglei Xu. „Quality characteristic of spray-drying egg white powders“. Molecular Biology Reports 40, Nr. 10 (22.09.2013): 5677–83. http://dx.doi.org/10.1007/s11033-013-2669-1.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Swastawati, Fronthea, Eko Susanto, Bambang Cahyono und Wahyu Aji Trilaksono. „Quality Characteristic and Lysine Available of Smoked Fish“. APCBEE Procedia 2 (2012): 1–6. http://dx.doi.org/10.1016/j.apcbee.2012.06.001.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Zhao, Yan Ming, De Shun Liu, Ze Jun Wen und Ting Liu. „Modeling Present Worth of Product Quality Loss of STB Characteristic Based on Service Life Distribution“. Applied Mechanics and Materials 397-400 (September 2013): 846–51. http://dx.doi.org/10.4028/www.scientific.net/amm.397-400.846.

Der volle Inhalt der Quelle

Annotation:

The product smaller-the-better (STB) quality characteristics are continually changing and out of specification limits because of the constant stress, wear and others after the product is put into use, which will cause loss because of the product rejected and scrapped. On the basis of the quality viewpoint that product quality loss is present worth of a loss caused as a result of its quality characteristics because its quality characteristic is out of specification and lead to product scrap after the product is put into service, the paper establishes the present worth model of quality loss of STB characteristic based on service life distribution, and proposes the calculation method on the probability density function (PDF) of the product service life based on the technical specifications of STB quality characteristic. It takes the concentricity between the inner cylindrical surface and the outer cylindrical surface of the link bushing as an example to analysis the various factors that impact on the present worth of concentricity quality loss in the new model, and contrast with Taguchi quality loss model. The results show that the new model describes an actual loss that a product imparts to society after the product is put into service, and can reflect the quality loss of STB characteristic in the product service process, and is more realistic than Taguchi quality loss model of STB. The new model extends tolerance design of STB characteristic from the manufacturing stage to the service stage.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Vaníček, J. „Software quality requirements“. Agricultural Economics (Zemědělská ekonomika) 52, No. 4 (17.02.2012): 177–85. http://dx.doi.org/10.17221/5014-agricecon.

Der volle Inhalt der Quelle

Annotation:

At the present time, the international standards and technical reports for system and software product quality are dispersed in several series of normative documents (ISO/IEC 9126, ISO/IEC 14598, ISO/IEC 12119 etc.). These documents are not purely consistent and do not contain a tools for exact requirements set-ups. As quality is defined as a degree to which the set of inherent characteristic fulfils requirements, the exact requirement formulation is the key point for the quality measurement evaluation. This paper presents the framework for quality requirements for software, which is recommendable to use in the new international standard series ISO/IEC 250xx developed on the SQuaRE (Software Quality Requirements and Evaluation) standardisation research project. The main part of this contribution was presented on the conference Agrarian Perspectives XIV, organised by the Czech University of Agriculture in Prague, September 20 to 21, 2005.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Luo, Win-Jet, Kuen-Suan Chen, Chun-Min Yu und Ting-Hsin Hsu. „The Fuzzy Process Quality Evaluation Model for the STB Quality Characteristic of Machining“. Applied Sciences 10, Nr. 22 (21.11.2020): 8272. http://dx.doi.org/10.3390/app10228272.

Der volle Inhalt der Quelle

Annotation:

Whether it is important components of a machine tool itself or various important components processed by the machine tool, many vital quality characteristics mostly belong to the smaller-the-better type. When the process quality levels of these quality characteristics do not attain to the criteria, friction loss may increase during the machine operation, affecting not only the process precision and accuracy but also the lifetime of the product. Therefore, this study applied a smaller-the-better six-sigma quality index simultaneously demonstrating process quality level and process yield. Besides, in coping with statistical process control data, a one-tail confidence-interval-based fuzzy testing method was developed to evaluate process quality. Because this approach is built on the basis of confidence intervals, it can reduce the possibility of misjudgment resulting from sampling errors as well as integrate past experience to enhance the accuracy and precision of the assessment, and then it can grasp the timeliness of improvement.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Yih-fong, Tzeng, und Jean Ming-der. „Dimensional quality optimisation of high-speed CNC milling process with dynamic quality characteristic“. Robotics and Computer-Integrated Manufacturing 21, Nr. 6 (Dezember 2005): 506–17. http://dx.doi.org/10.1016/j.rcim.2004.07.014.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Gewohn, Marco, Thomas Usländer und Jürgen Beyerer. „Production quality control through a user-oriented and characteristic-based quality visualization model“. Procedia CIRP 79 (2019): 511–16. http://dx.doi.org/10.1016/j.procir.2019.02.105.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Edi, Edi, und Michell Michell. „DAMPAK AUDIT COMMITTEE CHARACTERISTIC DAN FIRM CHARACTERISTIC TERHADAP MANAJEMEN LABA“. Jurnal Benefita 3, Nr. 2 (31.07.2018): 124. http://dx.doi.org/10.22216/benefita.v3i2.1857.

Der volle Inhalt der Quelle

Annotation:

The purpose of this research was to analyze the impact of audit committee characteristic and firm characteristic on earning management. The dependent variable in this research was audit committee size, audit committee independence, audit committee meeting, audit quality, audit strength, board size, the proportion of independent non-executive directors. This research also has firm size, leverage and cash flow from operating activities as the control variable. The results showed that audit committee meeting, audit quality, leverage and cash flow operating negatively significant toward earning management. The proportion of independent non-executive directors, audit strength and firm size positively significant toward earning management. The variable of audit committee size, audit committee independence, and board size insignificantly effect toward earning management. Penelitian ini bertujuan untuk menganalisis dampak audit komite karakteristik dan karakteristik perusahaan terhadap manajemen laba pada perusahaan non finansial yang terdaftar di BEI. Variabel dependen dalam penelitian ini adalah discretionary accruals. Variabel independen terdiri dari audit committee size, audit committee independence, audit committee meeting, audit quality, audit strength, board size, proportion of independent nonexecutive directors. Penelitian ini juga menggunakan variabel kontrol, yaitu firm size, leverage dan cash flows from operating activities. Hasil penelitian menunjukkan bahwa variabel audit committee meeting, audit quality, leverage dan cash flow operating berpengaruh signifikan negatif terhadap manajemen laba. Variabel proportion of independent non executive directors, audit strength dan firm size berpengaruh signifikan positif terhadap manajemen laba. Variabel audit committee size, audit committee independence dan board size tidak berpengaruh signifikan terhadap manajemen laba.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Edi, Edi, und Michell Michell. „DAMPAK AUDIT COMMITTEE CHARACTERISTIC DAN FIRM CHARACTERISTIC TERHADAP MANAJEMEN LABA“. Jurnal Benefita 3, Nr. 2 (31.07.2018): 124. http://dx.doi.org/10.22216/jbe.v3i2.1857.

Der volle Inhalt der Quelle

Annotation:

The purpose of this research was to analyze the impact of audit committee characteristic and firm characteristic on earning management. The dependent variable in this research was audit committee size, audit committee independence, audit committee meeting, audit quality, audit strength, board size, the proportion of independent non-executive directors. This research also has firm size, leverage and cash flow from operating activities as the control variable. The results showed that audit committee meeting, audit quality, leverage and cash flow operating negatively significant toward earning management. The proportion of independent non-executive directors, audit strength and firm size positively significant toward earning management. The variable of audit committee size, audit committee independence, and board size insignificantly effect toward earning management. Penelitian ini bertujuan untuk menganalisis dampak audit komite karakteristik dan karakteristik perusahaan terhadap manajemen laba pada perusahaan non finansial yang terdaftar di BEI. Variabel dependen dalam penelitian ini adalah discretionary accruals. Variabel independen terdiri dari audit committee size, audit committee independence, audit committee meeting, audit quality, audit strength, board size, proportion of independent nonexecutive directors. Penelitian ini juga menggunakan variabel kontrol, yaitu firm size, leverage dan cash flows from operating activities. Hasil penelitian menunjukkan bahwa variabel audit committee meeting, audit quality, leverage dan cash flow operating berpengaruh signifikan negatif terhadap manajemen laba. Variabel proportion of independent non executive directors, audit strength dan firm size berpengaruh signifikan positif terhadap manajemen laba. Variabel audit committee size, audit committee independence dan board size tidak berpengaruh signifikan terhadap manajemen laba.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Shan, Chang Ji, Yi Duo Bian und Nan Xu. „The Performance Comparison Analysis on Hydraulic Muffler of Quality Room with Parallel Line“. Applied Mechanics and Materials 709 (Dezember 2014): 125–29. http://dx.doi.org/10.4028/www.scientific.net/amm.709.125.

Der volle Inhalt der Quelle

Annotation:

Though establishing physical modeling of porous hydraulic mufflers, it could derive the transfer matrix. Porous hydraulic muffler attenuation characteristic curve is obtained by MATLAB programming. Through the analysis of characteristic curve, the result showed that the porous hydraulic muffler can effectively absorb fluid pulsation and it is concluded that the change of the structure parameters affect on the attenuation characteristics. It can provide a reference for related research platform.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Liu, J., L. J. Xu und Z. H. Lin. „Support Vector Machine-Based Method for Quality Characteristic Modeling“. Applied Mechanics and Materials 10-12 (Dezember 2007): 253–57. http://dx.doi.org/10.4028/www.scientific.net/amm.10-12.253.

Der volle Inhalt der Quelle

Annotation:

Root-cause identification and product quality characteristic modeling are key issues for improving product quality and the productivity of manufacturing process. The quality characteristic model, which indicates the influence of the dominate root-causes on the product quality characteristic, is the basis for quality control. In this paper an approach for quality characteristic modeling based on Support Vector Machine is presented. The selections of parameters and the Kernel function are discussed. The presented approach is applied for analyzing and predicting the quality of inertial gyroscope.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Adeoti, Olatunde A. „On control chart for monitoring exponentially distributed quality characteristic“. Transactions of the Institute of Measurement and Control 42, Nr. 2 (29.08.2019): 295–305. http://dx.doi.org/10.1177/0142331219868595.

Der volle Inhalt der Quelle

Annotation:

The double exponentially weighted moving average (DEWMA) control chart has been observed to be more sensitive than the exponentially weighted moving average (EWMA) control chart for process monitoring assuming that the quality characteristic follows the normal distribution. In this paper, the DEWMA control chart is proposed for monitoring quality characteristics that follow the exponential distribution using variable transformation technique. The in-control and out-of-control average run lengths (ARLs) of the proposed control chart is obtained for equal and unequal smoothing constants. The performance of the proposed control chart with equal and unequal smoothing constants was investigated and compared with recent existing control charts in terms of the out-of-control average run lengths. Real life example is given to demonstrate the application of the proposed chart. The findings show that the performance of the proposed control chart outweighs existing control charts in the monitoring of process parameter when the quality variable follows exponential distribution for all shift sizes.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Pham, Thuan Quoc. „Relevance of financial reporting quality - Theory and practice in Vietnamese enterprises“. Science & Technology Development Journal - Economics - Law and Management 1, Q2 (30.11.2017): 119–28. http://dx.doi.org/10.32508/stdjelm.v1iq2.443.

Der volle Inhalt der Quelle

Annotation:

Financial reporting quality is one the most interesting topics which draw a great deal of attention to researchers and scientists in the field of accounting (Céline Michailesco, 2010). In the review of research on financial information from 1980 to 2016, Pham (2016) found that characteristics of useful financial information are relatively diverse with as many as 15 attributes being identified. In addition, he also found that all research in any period has employed the characteristics published by professional associations such as American Institute of Accountants, Financial Accounting Standards Board (FASB) and the International Accounting Standards Board (IASB as theoretical basis. Research on the quality of financial information is diverse yet have many things in common, above all is the Relevance characteristic which considered to be the basic qualitative component of the quality of financial information in financial statements. Conceptual Framework officially issued by FASB & IASB in 2010 (FASB & IASB 2010) has further confirmed Relevance is the basic quality component of financial information. Compared with previous announcements, there has been a considerable change in the criteria and attributes used to evaluate the appropriateness of Relevance characteristic of financial information in financial statements. This study aims at confirming the importance of the Relevance component in evaluating the quality of financial information, clarifyingg the characteristics of Relevance measurement before and after Conceptual Framework 2010 and constructing relevant scales as well as measuring the qualitative characteristic of Relevance among enterprises in Vietnam.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Yip, WS, S. To und WK Wang. „Design of an optical lens for LED lighting using a hybrid principal components analysis–Taguchi method“. Lighting Research & Technology 51, Nr. 5 (06.06.2018): 788–802. http://dx.doi.org/10.1177/1477153518780512.

Der volle Inhalt der Quelle

Annotation:

Optical lenses are extensively used to enhance the performance of light-emitting diodes. Both uniformity and efficiency are important performance indicators in lens design; however, improving uniformity always lowers efficiency. In this study, the Taguchi method and principal component analysis (PCA) are integrated to optimise the lens shape for two quality objectives, namely, uniformity and efficiency. The Taguchi method was conducted twice to establish the signal/noise ratio of the two quality characteristics for calculating the principal components in PCA. Then, the optimum parameters obtained by the Taguchi method were processed by PCA. The correlated individual responses were converted to the principal components which explained most of the dataset and were considered as the single quality characteristic for the optimisation. The combined method resolved the difficulties of optimising multiple quality characteristics without sacrificing any particular quality characteristic while the traditional Taguchi method can only be applied to the single quality characteristic. A LED light source fitted with a secondary lens designed by the proposed method showed over 92% light efficiency and an improvement in uniformity.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Wang, Yumin, Guangcan Zhu und Zhonglian Yang. „Analysis of water quality characteristic for water distribution systems“. Journal of Water Reuse and Desalination 9, Nr. 2 (26.12.2018): 152–62. http://dx.doi.org/10.2166/wrd.2018.045.

Der volle Inhalt der Quelle

Annotation:

Abstract Since governments all over the world are paying more attention to water quality in water distribution systems (WDS), a method based on mass balance and first-order chlorine decay model was proposed to assess the efficiency of WDS involving water quality (represented by residual chlorine). The concepts of surplus chlorine factor (S) for nodes in individual pipes and comprehensive surplus chlorine factor (CS) for nodes in WDS were put forward to represent the water quality characteristic of nodes in WDS based on the assumption that the structure of the pipe network and quantity of chlorine dose are definite. The proposed method was applied to two examples of WDS and sensitivity analysis regarding chlorine decay coefficient (k0) was discussed. The results indicated that values of CS for nodes in WDS are affected by the inflow of nodes, which is determined by water demand and pipe length from water sources to nodes. In addition, the value of CS increases with k0 when the inflow of the node is larger than the optimized inflow. The results verified that the deduction of S for a single pipe can be generalized to WDS, and can measure the water quality characteristics for nodes in WDS easily.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Chiang, Kun-Da, Ying-Chieh Kao, Jung-Tang Kung und Chiang Liu. „Investigate Characteristic of Pitching Quality by Velocity and Trajectory“. Journal of Biomechanics 40 (Januar 2007): S631. http://dx.doi.org/10.1016/s0021-9290(07)70619-x.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Smilka, Vladyslav. „Settlement Compactness as a Quality Characteristic of Land Use“. Baltic Journal of Real Estate Economics and Construction Management 8, Nr. 1 (01.01.2020): 34–44. http://dx.doi.org/10.2478/bjreecm-2020-0004.

Der volle Inhalt der Quelle

Annotation:

AbstractThe aim of the research is to propose the method for forming an indicator of compactness of a populated population and to test it. The comparative analysis, structuring, geospatial modelling methods have been used in the research. Land use management and development regulation, which is carried out by urban planning documentation, is the spatial frame for sustainable territory development. Forming of quantitative and qualitative indicator system that characterises the level of urban development of a settlement is an overriding issue for state estimation of settlement development. Management decisions on land use management should be made taking into account the evaluation results. The compact form is an essential basis for the efficient and stable use of the settlement territorial resources. There is no single evaluation technique of settlement compactness; there are a variety of approaches and methods for the assessment of settlement form. The compactness level in this study is estimated by a system of indicators that attests to the multiplicity of land uses and the degree of accessibility to basic services and leisure facilities. The determining technique of component compactness has been tested in evaluating the planning structure of Kyiv. All planning quarters are rated according to a five-level rating scale. For each classification group, general recommendations have been developed to improve the land use system aimed at improving the compactness of the settlement. The results of compactness assessment can be used through geoinformation monitoring tools in the provision of administrative services as justification for managerial decision-making.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Wang Zhiqun, 王智群, 尧舜 Yao Shun, 崔碧峰 Cui Bifeng, 王智勇 Wang Zhiyong und 沈光地 Shen Guangdi. „Thermal Characteristic of High Beam Quality Laser Diode Array“. Chinese Journal of Lasers 37, Nr. 10 (2010): 2497–501. http://dx.doi.org/10.3788/cjl20103710.2497.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Chen, Chung-Ho. „Process mean and variance settings for uniform quality characteristic“. Journal of Information and Optimization Sciences 40, Nr. 1 (17.08.2018): 43–46. http://dx.doi.org/10.1080/02522667.2017.1406627.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Zizong, Ma, und Zhao Fengyu Xu Jichao. „Economic Design of the Specification for Geometrical Quality Characteristic“. Asian Journal on Quality 2, Nr. 1 (17.04.2001): 50–57. http://dx.doi.org/10.1108/15982688200100005.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Kim, Kwang-Jae. „DETERMINING OPTIMAL DESIGN CHARACTERISTIC LEVELS IN QUALITY FUNCTION DEPLOYMENT“. Quality Engineering 10, Nr. 2 (November 1997): 295–307. http://dx.doi.org/10.1080/08982119708919137.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Cha, Mi-Na, Young Yoon, Seon-A. Jang, Geun-Seoup Song und Young-Soo Kim. „Quality Characteristic of Saccharified Materials Manufactured from Germinated Barley“. Korean Journal of Food Science and Technology 43, Nr. 3 (30.06.2011): 315–20. http://dx.doi.org/10.9721/kjfst.2011.43.3.315.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Clarkson, Eric, und Harrison H. Barrett. „Characteristic functionals in imaging and image-quality assessment: tutorial“. Journal of the Optical Society of America A 33, Nr. 8 (08.07.2016): 1464. http://dx.doi.org/10.1364/josaa.33.001464.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Nam, Hyeon-Hwa, und Byung-Kil Choo. „A Quality Characteristic in Schisandra chinensis by Puff processing“. Korean Journal of Organic Agricultue 24, Nr. 4 (31.12.2016): 893–905. http://dx.doi.org/10.11625/kjoa.2016.24.4.893.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

M'Hallah, Rym, und Brian J. Melloy. „An adaptive control procedure for a fuzzy quality characteristic“. International Journal of Quality Engineering and Technology 1, Nr. 3 (2010): 276. http://dx.doi.org/10.1504/ijqet.2010.034612.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Marpaung, Lilis Nurhayati Sinta Marito, Tina Christina Lumban Tobing und Rina Amalia Caromina Saragih. „Characteristic Quality of Life Children with Rheumatic Heart Disease“. Open Access Macedonian Journal of Medical Sciences 9, T3 (18.06.2021): 270–73. http://dx.doi.org/10.3889/oamjms.2021.6331.

Der volle Inhalt der Quelle

Annotation:

Background: Rheumatic heart disease is an acquired disease that has characterized damaged valve and it effects the quality of life in children. Aim: To asses quality of life in patient with rheumatic heart disease by using Pediatric Quality of Life Inventory (PedsQL) instrument at pediatric cardiologist. Methods: A descriptive study with cross sectional study conduct among children aged 5 to 18 years old attend the Pediatric Cardiology at Haji Adam Malik Hospital Medan, from 2016 to 2018. Result: A hundred children with rheumatic heart disease in this study who had affected quality of life-based on group age with 5 to 7 year old in physical function was 6 subjects (85.7%), social function was 1 subject (14.2%), and school function was 2 subjects (28.5%) (Table 3); group age with 8 to 12 year old in physical function was 100 subjects (100%), emotional function was 3 subjects (3%), social function was 1 subject (3%), and school function was 5 subjects (15.1%); group aged 13 to 18 year old in physical function was 60 subjects (100%), emotional function was 1 subject (16.7%), and school function was 51 subjects (85%). Conclusion: From 100 children with RHD dominant in group aged 13-18 years old and male, mal malnutrition status, using of erythromycin, high senior school of level parents’ education, and valve disorder was mitral regurgitation. The quality of life was affected in all age groups, especially in the domain of physical function, and school functions with RHD.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Vaníček, J. „Software and data quality“. Agricultural Economics (Zemědělská ekonomika) 52, No. 3 (17.02.2012): 138–46. http://dx.doi.org/10.17221/5007-agricecon.

Der volle Inhalt der Quelle

Annotation:

The paper presents new ideas in the International SQuaRE (Software Quality Requirements and Evaluation) standardisation research project, which concerns the development of a special branch of international standards for software quality. Data can be considered as an integral part of software. The current international standard and technical report of the ISO/IEC 9126, ISO/IEC 14598 series and ISO/IEC 12119 standard covert the whole software as an indivisible entity. However, such data sets as databases and data stores have a special character and need a different structure of quality characteristic. Therefore it was decided in the SQuaRE project create a special international standard for data quality. The main idea for this standard and the critical discussion of these ideas is presented in this paper. The main part of this contribution was presented on the conference Agricultural Perspectives XIV, aligned by Czech University of Agriculture in Prague, September 20 to 21, 2005.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Yi, Yang, Juan Yao, Wei Xu, Li-Mei Wang und Hong-Xun Wang. „Investigation on the quality diversity and quality-FTIR characteristic relationship of sunflower seed oils“. RSC Advances 9, Nr. 47 (2019): 27347–60. http://dx.doi.org/10.1039/c9ra04848k.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Banciu, Felicia Veronica, Ion Grozav und Cristian Gheorge Turc. „Tolerance Allocation Using Design of Experiments“. Applied Mechanics and Materials 760 (Mai 2015): 45–50. http://dx.doi.org/10.4028/www.scientific.net/amm.760.45.

Der volle Inhalt der Quelle

Annotation:

Tolerance design plays a very important in any manufacturing process because this activity directly influences products cost and quality. In design activity the designer solve the quality problems selecting tight tolerances for components but this generates cost increasing. The practical problem is to assure the high quality characteristics using the maximum tolerances for components that influence them. The paper’s aim is to find optimal parameters setting which assure the desire value of quality characteristics using the DoE (Design of Experiments), and to find a mathematical model and a respective quality characteristic function of the parameters that it was influenced. Using the mathematical function, by imposing the desired tolerance for quality characteristic, it will be allocated the optimal tolerance for components. This tolerance allocation will be verified using Monte-Carlo method.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Chen, Kuen-Suan, Der-Fa Chen, Ming-Chieh Huang und Tsang-Chuan Chang. „Analyzing processing quality of machine tools via processed product: Example of ball valve processing machine“. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 234, Nr. 4 (14.05.2020): 331–41. http://dx.doi.org/10.1177/0954408920925028.

Der volle Inhalt der Quelle

Annotation:

Machine tools are fundamental equipment in industrial production, and their processing quality exerts a direct impact on the quality of the component product that they process. Thus, machine tool manufacturers develop various machine tools depending on market needs and processing functions, and the processed component products generally possess multiple smaller-the-better, larger-the-better, and nominal-the-best quality characteristics at the same time. For this reason, this study employed the widely used process capability indices, [Formula: see text], [Formula: see text], and [Formula: see text] to develop a model that can evaluate the process quality of component products and analyze the processing quality of various machine tools. We first converted the process capability indices into functions of the accuracy and precision indices and constructed a multi-characteristic quality analysis chart that can identify the reason for poor process quality in a quality characteristic. Furthermore, considering the fact that the process capability indices can only be estimated, which may lead to misjudgment in the evaluation of process quality, we derived the [Formula: see text] upper confidence limits of indices and the coordinates formed by the corresponding accuracy and precision indices. Manufacturers can then evaluate the process quality levels of the quality characteristics based on where the coordinates falls in the multi-characteristic quality analysis chart. This can more reliably assist manufacturers in monitoring the processing quality of their machine tools and providing feedback to the machine tool manufacturers for machine improvement.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Mohamad @ Masri, Muhamad Hilmi, Abdul Hadi Nawawi, Edie Ezwan Mohd Safian und Ahmad Fawwaz Ahmad Saleh. „Characteristic Qualities Affecting Landed House Prices“. Asian Journal of Quality of Life 3, Nr. 12 (19.07.2018): 11. http://dx.doi.org/10.21834/ajqol.v3i12.137.

Der volle Inhalt der Quelle

Annotation:

The research was conducted to find the characteristics quality of houses in Malaysia. The aim of this research was to produce the ranking characteristics of house qualities and determining its weightages. The methodology used in this research was primarily by using the Delphi Method to ascertain characteristics quality and also Analytical Hierarchy Process to determine the ranking of the characteristics quality. Data collection gathered through a structured questionnaire that incorporates the element of Saaty’s Scale using variables outlined from review and interview. A theoretical framework of the research was established from this that will lead to future research model.Keywords: House Quality; House Price; AHP; DelphieISSN 2398-4279 © 2018. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Паровик, Р. И. „Анализ добротности вынужденных колебаний дробного линейного осциллятора“. Журнал технической физики 90, Nr. 7 (2020): 1059. http://dx.doi.org/10.21883/jtf.2020.07.49436.233-19.

Der volle Inhalt der Quelle

Annotation:

Using the harmonic balance method, analytical formulas are obtained for calculating the amplitude-frequency and phase-frequency characteristics, as well as the quality factor of the forced oscillations of a linear fractional oscillator. It was established that the characteristics under study depend on the dissipative properties of the medium - memory effects, which are described by derivatives of fractional orders. It is shown that fractional orders affect the attenuation of the oscillatory process and are associated with its quality factor. The calculated curves of the characteristics of the forced oscillations of a linear linear fractional oscillator showed that fractional orders can be considered as control parameters of the oscillatory process in a dissipative medium. Key words: quality factor, amplitude-frequency characteristic, phase-frequency characteristic, fractional derivatives, memory.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Tai, Allen H. „An EOQ model for imperfect quality items with multiple quality characteristic screening and shortage backordering“. European J. of Industrial Engineering 9, Nr. 2 (2015): 261. http://dx.doi.org/10.1504/ejie.2015.068657.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Šnebergrová, J., H. Čížková, E. Neradová, B. Kapci, A. Rajchl und M. Voldřich. „Variability of characteristic components of aronia“. Czech Journal of Food Sciences 32, No. 1 (18.02.2014): 25–30. http://dx.doi.org/10.17221/540/2012-cjfs.

Der volle Inhalt der Quelle

Annotation:

The variability of characteristic components of aronia (Aronia melanocarpa, black chokeberry) and to evaluate the chemical composition and quality of aronia products in order to complete the already available data and to facilitate authentication of fruit products were estimated. The mean values obtained for the set of aronia fruits were: soluble solids 19.9 °Brix, titratable acidity 9.8 g malic acid/kg, formol number 11.9 ml 0.1M NaOH/100 g, ash 6.7 g/kg, phosphorus 0.34 g/kg, potassium 2.90 g/kg, calcium  0.27 g/kg, magnesium 0.16 g/kg, sucrose 0.10 g/kg, glucose 47.1 g/kg, fructose 37.8 g/kg, sorbitol 66.1 g/kg, malic acid 9.6 g/kg, citric acid 1.0 g/kg, quinic acid 5.0 g/kg, isocitric acid 0.02 g/kg. These values can potentially be a useful tool to determine aronia content in foodstuffs or to determine adulteration of other fruit-based products with aronia. The most promising markers appeared to be the content of sorbitol, quinic acid and characteristic profile of anthocyanins measured by HPLC.  

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Skakic, Dusan, Igor Dzincic, Biserka Nestorovic und Tanja Palija. „Influence of different joints on quality of dining chairs“. Bulletin of the Faculty of Forestry, Nr. 97 (2008): 235–47. http://dx.doi.org/10.2298/gsf0897235s.

Der volle Inhalt der Quelle

Annotation:

Products quality presents one of the main causes of every contemporary organized production, which includes it, in group of basic exit characteristics. According to national standard, quality mark is based on testing of its quality characteristics. A characteristic of quality has been divided into four groups of demands: functionality (functional dimensions and stability tests), rigidity, surface rigidity, quality of materials and work piece accuracy. Dining chair has been investigated by use of different wood joints, and some remarks on construction has been given. Two groups of investigated chairs has been mounted by use of metal fittings, and one group has been connected with wood dowels by use of PVA wood glue.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Jihun Yoon. „A Study on Chinese Characteristic Textbook Examination Result Analysis for Improvement of Chinese Characteristic Textbook Quality“. DONG-BANG KOREAN CHINESE LIEARATURE ll, Nr. 61 (Dezember 2014): 391–420. http://dx.doi.org/10.17293/dbkcls.2014..61.391.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Li, Ying, Can Cui, Qi Gang Jiang, Hong Ji Chen und Xue Yuan Zhu. „Remote Sensing Image Quality Assessment Based on Engineering Quality and Spectral Quality“. Advanced Materials Research 1073-1076 (Dezember 2014): 1922–33. http://dx.doi.org/10.4028/www.scientific.net/amr.1073-1076.1922.

Der volle Inhalt der Quelle

Annotation:

This paper presented a new method to evaluate Remote Sensing image quality, by comparing ZY1-02C, ZY3, and SPOT5 images on the engineering quality and spectral quality. It is important to explore new options to evaluate different Remote Sensing image sources quality, in order to ensure the users could apply a best fit data source to environmental monitoring, ecological monitoring and so on. In this article, there were three aspects in the engineering quality assessment part, including the statistical character, the texture and the energy. And in the spectral quality assessment part, the imaging space, the curve space and the characteristic space were built to compare and measure different spectral ability of extracting ground objects among ZY1-02C, ZY3 and SPOT5 images. The result shows such a Remote Sensing image quality assessment can be generalized to choose suitable data source for some specific field.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Pang, Gui Bing, D. Chen, Fei Teng, Ze Fei Wei und Wen Ji Xu. „Surface Topography Characteristic and Statistical Characteristic of 1Cr18Ni9Ti Polished by Electrochemical Polishing“. Materials Science Forum 626-627 (August 2009): 309–14. http://dx.doi.org/10.4028/www.scientific.net/msf.626-627.309.

Der volle Inhalt der Quelle

Annotation:

The surface quality of components has the important influence on the components’ operational performance, characteristic of the geometry topography and statistical Characteristic is the important aspect of the surface quality. This study takes the arithmetic mean deviation of the assessed profile (Ra) to reflect the altitude characteristic of the surface profile, takes the mean width of the profile elements (Sm) to reflect the width characteristic of the surface profile, takes the material ratio of the profile (tp) to reflect the shape characteristic of the surface profile and takes the altitude density function φ(z) and autocorrelation function R(l) to reflect the statistical characteristic. Four groups of experiments are carried out in which 1Cr18Ni9Ti is taken as the material object of the test piece and test pieces with different initial surface roughness are polished. By experiment, the changing rules of the value of Ra, Sm, tp, φ(z) and R(l) after different polishing time are obtained. By analyzing the changing rules of Ra, Sm, tp, φ(z) and R(l), the influence of the Electrochemical Polishing (ECP) process on the surface geometry and statistical characteristic is obtained.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Liang, Huixin, Deqiao Xie, Yuyi Mao, Jianping Shi, Changjiang Wang, Lida Shen und Zongjun Tian. „The Size Effect on Forming Quality of Ti–6Al–4V Solid Struts Fabricated via Laser Powder Bed Fusion“. Metals 9, Nr. 4 (06.04.2019): 416. http://dx.doi.org/10.3390/met9040416.

Der volle Inhalt der Quelle

Annotation:

Laser powder bed fusion (LPBF) is useful for manufacturing complex structures; however, factors affecting the forming quality have not been clearly researched. This study aimed to clarify the influence of geometric characteristic size on the forming quality of solid struts. Ti–6Al–4V struts with a square section on the side length (0.4 to 1.4 mm) were fabricated with different scan speeds. Micro-computed tomography was used to detect the struts’ profile error and defect distribution. Scanning electron microscopy and light microscopy were used to characterize the samples’ microstructure. Nanoindentation tests were conducted to evaluate the mechanical properties. The experimental results illustrated that geometric characteristic size influenced the struts’ physical characteristics by affecting the cooling condition. This size effect became obvious when the geometric characteristic size and the scan speed were both relatively small. The solid struts with smaller geometric characteristic size had more obvious size error. When the geometric characteristic size was smaller than 1 mm, the nanohardness and elastic modulus increased with the increase in scan speed, and decreased with the decline of the geometric characteristic size. Therefore, a relatively high scan speed should be selected for LPBF—the manufacturing of a porous structure, whose struts have small geometric characteristic size.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

DUAN, Guijiang. „Mechanical Product Quality Characteristic Variation Mitigation Based on Linkage Model“. Journal of Mechanical Engineering 51, Nr. 16 (2015): 196. http://dx.doi.org/10.3901/jme.2015.16.196.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Zeitschriftenartikel zum Thema „Quality characteristic“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an