Auswahl der wissenschaftlichen Literatur zum Thema „Printing method“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Printing method" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Printing method"
Phillips, Michael. „“Printing in the infernal method”: William Blake’s method of “Illuminated Printing”“. Interfaces, Nr. 39 (01.07.2018): 67–89. http://dx.doi.org/10.4000/interfaces.489.
Der volle Inhalt der QuelleChen, Ni, Qiang Wang, Ping Yang und Jun Long Xu. „Research on the Evaluation of Digital Prints Quality Based on Noise“. Applied Mechanics and Materials 731 (Januar 2015): 222–27. http://dx.doi.org/10.4028/www.scientific.net/amm.731.222.
Der volle Inhalt der QuellePeng Liu, Peng Liu, Ning Zhao Ning Zhao, Linghui Ren Linghui Ren und Qianqian Xu Qianqian Xu. „Color restoration method of printing in machine visual detection“. Chinese Optics Letters 12, s1 (2014): S11501–311506. http://dx.doi.org/10.3788/col201412.s11501.
Der volle Inhalt der QuelleYang, Minhua, Xin-guang Lv, Xiao-jie Liu und Jia-qing Zhang. „Research on color 3D printing based on color adherence“. Rapid Prototyping Journal 24, Nr. 1 (02.01.2018): 37–45. http://dx.doi.org/10.1108/rpj-07-2016-0112.
Der volle Inhalt der QuelleShen, Xiaoqiang, Zhiheng Yu, Fengli Huang, Jinmei Gu und Hui Zhang. „Fabrication of 3D microstructures for flexible pressure sensors based on direct-writing printing“. AIP Advances 12, Nr. 10 (01.10.2022): 105205. http://dx.doi.org/10.1063/5.0107003.
Der volle Inhalt der QuelleVaganov, A. V., S. S. Shemelyunas, A. A. Shvedunenko und A. M. Makarov. „3D PRINTING TIME REDUCTION METHOD“. Izvestia Volgograd State Technical University, Nr. 3 (2022): 47–49. http://dx.doi.org/10.35211/1990-5297-2022-3-262-47-49.
Der volle Inhalt der QuellePhillips, Michael. „"Printing in the Infernal Method"“. Interfaces 30, Nr. 1 (2010): 21–34. http://dx.doi.org/10.3406/inter.2010.1369.
Der volle Inhalt der QuellePhung, Thanh-Huy. „An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed“. NIP & Digital Fabrication Conference 33, Nr. 1 (01.11.2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.126.
Der volle Inhalt der QuellePhung, Thanh-Huy. „An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed“. NIP & Digital Fabrication Conference 33, Nr. 1 (01.11.2017): 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.1.art00030_1.
Der volle Inhalt der QuelleJi, Wen Ge, Hua Wu, Jing Shen und Mei Feng Wang. „A Novel and Efficient Method for Digital Printing“. Applied Mechanics and Materials 404 (September 2013): 668–71. http://dx.doi.org/10.4028/www.scientific.net/amm.404.668.
Der volle Inhalt der QuelleDissertationen zum Thema "Printing method"
Kanani, Chirantan. „Cell Printing: A novel method to seed cells onto biological scaffolds“. Digital WPI, 2012. https://digitalcommons.wpi.edu/etd-theses/332.
Der volle Inhalt der QuelleHoleman, Tara. „The Systematic Approach to Microplotter Printing of Perovskite Precursors“. Ohio University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1534795066623052.
Der volle Inhalt der QuelleBishop, Craig, Ian Armstrong und Rolando Navarette. „A Novel Method for 3D Printing High Conductivity Alloys for UHF Applications“. International Foundation for Telemetering, 2014. http://hdl.handle.net/10150/577400.
Der volle Inhalt der QuelleTraditional approaches to constructing 3D structural electronics with conductive and dielectric materials include ink-jet printed, silver-bearing ink and fine copper wire meshes. One approach combines stereo-lithographic 3D-printed photo-polymers with direct-printed silver-bearing conductive inks. Results have shown 3D conductive structures with conductivities in the range 2x10⁶ to 1x10⁷ S/m using annealing temperatures ranging from 110°C to 150°C for 10 to 15 minutes. However, the stereo-lithographic approach suffers from the high cost of the printer and structural deformation during annealing. This paper presents a new method for 3d printing high conductivity metal alloys using consumer-grade 3D printer. The design and construction of the necessary modification will be presented in addition to the new 3D design process. The method yields metal structures with expected conductivities exceeding 2.6x10⁶ S/m. The process is performed without an annealing step, so the polymeric structural material is not exposed to high temperatures for any prolonged time. A UHF ISM band antenna is constructed for an RFID application using this method, the antenna performance is measured, and the results are compared simulations in Ansys HFSS. This new method can reduce total cost, and several low melting-point alloys could raise the conductivity.
Latanision, Ivan M. „A comparison between the staggered position one-angle screening and the multi-angle screening method in terms of misregistration when printing process color on newsprint /“. Online version of thesis, 1992. http://hdl.handle.net/1850/11251.
Der volle Inhalt der QuelleFuller, Sawyer Buckminster 1977. „A fast flexible ink-jet printing method for patterning networks of neurons in culture“. Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89393.
Der volle Inhalt der QuelleOttesen, Vegar. „Bacterial Microarrays by Microcontact Printing : Development of a Method for Immobilizing Live Bacteria on Microarrays“. Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26120.
Der volle Inhalt der QuelleMcMaster, Rebecca J. „A simple method towards 3D-printing and crosslinking partially hydrolysed poly(2-ethyl-2-oxazoline)“. Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/109910/1/Rebecca_McMaster_Thesis.pdf.
Der volle Inhalt der QuelleYuan, Kaiwen. „A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator“. Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54008.
Der volle Inhalt der QuelleApplied Science, Faculty of
Mechanical Engineering, Department of
Graduate
Özkol, Emre [Verfasser]. „Evaluation of the direct inkjet printing method for the fabrication of three-dimensional ceramic components / Emre Özkol“. Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2012. http://d-nb.info/1027765947/34.
Der volle Inhalt der QuelleAl-Khudary, Nadine. „Material thermal conductivity measurement by the 3-omega method : application to polymers characterization using inkjet printing technology“. Thesis, Lille 1, 2014. http://www.theses.fr/2014LIL10135/document.
Der volle Inhalt der QuelleThe characterization of polymers is gaining a great attention as they are one of the main constituents of future flexible or organic electronics. Given the fact that thermal management is an important issue in the frame work of flexible electronics, the knowledge of the thermal conductivity of polymer materials is needed. In this work, we propose the measurement of polymer material thermal conductivity using the three omega method. This method requires heating a metallic line conductor placed on the surface of the material under test by an alternating current source. The first measurements were done on polydimethyl siloxane (PDMS) polymer material for which a special procedure that consists in embedding the metallic line conductors near the surface has been applied.In addition to the well-known limitations of photolithography process which are the cost and the process duration, a particular concern lies in the fabrication of the metallic conductors by such process which might be destructive in case of polymer materials. Consequently, we propose an alternative method for this kind of materials based on inkjet printing technology. The thermal conductivities of polyimide and polyetherether ketone have been successfully measured using the three omega method combined with inkjet printing technology for sample preparation. Numerical simulations using finite element method (FEM) are also performed. Finally, experimental measurements are compared to Cahill’s analytical solution and FEM modelling. The overall results demonstrate that the inkjet printing technology is a good candidate for the characterization of flexible materials in terms of thermal conductivity
Bücher zum Thema "Printing method"
Clifton, Merritt. The Samisdat method: A do-it-yourself guide to printing. 4. Aufl. Rensselaer, New York: Factsheet Five, 1990.
Den vollen Inhalt der Quelle findenEskola, Taneli. Polymer photogravure: A new method for photographers and graphic artists. Helsinki: University of Art and Design Helsinki, 1996.
Den vollen Inhalt der Quelle findenMcBride, James. A method of selecting final colours for reproduction on ceramic tiles by screen-printing. London: LCP, 2002.
Den vollen Inhalt der Quelle findenCho, Hyŏng-jin. "Chikchi" pogwŏn yŏn'gu: Koryŏ sidae millap chujobŏp kŭmsok hwalcha inswaesul = A study on restoration of Jikji : metal typography of wax casting method in Korye dynasty. 8. Aufl. Kyŏnggi-do P'aju-si: Han'guk Haksul Chŏngbo, 2019.
Den vollen Inhalt der Quelle findenRowlatt, K. Reprographic Methods. Essex, England: Longman Publishing Group, 1986.
Den vollen Inhalt der Quelle findenPoulter, S. R. C. Developments in flexographic methods for newspaper printing. Leatherhead: Pira, Printing and Information Technology Division, 1985.
Den vollen Inhalt der Quelle finden1943-, Kipphan Helmut, Hrsg. Handbook of print media: Technologies and production methods. Berlin: Springer, 2001.
Den vollen Inhalt der Quelle findenRuggles, Philip Kent. Printing estimating: Costing methods for digital and traditional graphic imaging. 4. Aufl. Albany: Delmar Publishers, 1996.
Den vollen Inhalt der Quelle findenWhite, Jessica. Letterpress now: A DIY guide to new & old printing methods. Asheville: Lark Crafts, an imprint of Sterling Publishing Co., Inc., 2012.
Den vollen Inhalt der Quelle findenClem, John C. Prepress for digital printing: An introduction to prepress methods for the digital age. Baldwin, KS: Trio Publications, 2003.
Den vollen Inhalt der Quelle findenBuchteile zum Thema "Printing method"
de Witte, Dennis. „Printing method“. In Clay Printing, 111–27. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37161-6_8.
Der volle Inhalt der QuelleYin, Zhouping, YongAn Huang, Yongqing Duan und Haitao Zhang. „Control Method for EHD Printing“. In Electrohydrodynamic Direct-Writing for Flexible Electronic Manufacturing, 133–56. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4759-6_6.
Der volle Inhalt der QuelleWan, Qian, Li Wang und Guowei Ma. „Adaptable Tool-Path Planning Method for 3D Concrete Printing Based on the Mapping Method“. In Proceedings of the 2020 DigitalFUTURES, 255–64. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_24.
Der volle Inhalt der QuelleZeitlyn, Jonathan. „1. Choices of Printing Method; Design Ideas“. In Low Cost Printing for Development, 7–18. Rugby, Warwickshire, United Kingdom: Practical Action Publishing, 1989. http://dx.doi.org/10.3362/9781780445342.001.
Der volle Inhalt der QuelleMarchment, Taylor, und Jay Sanjayan. „Penetration Reinforcing Method for 3D Concrete Printing“. In RILEM Bookseries, 680–90. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49916-7_68.
Der volle Inhalt der QuellePang, Yechi, Zhuangzhi Ye und Zhijie Li. „Gravable Printing Plate Surface Defect Intelligent Detection Method“. In Advances in Graphic Communication, Printing and Packaging, 569–79. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_78.
Der volle Inhalt der QuelleLi, Yulong, Chengxin Li, Danfeng Jiang, Feng Liu, Xiajie Liu und Li Li. „Preparation and Shielding Performance of Gamma Ray Shielding Composite Materials Based on 3D Printing Technology“. In Springer Proceedings in Physics, 596–608. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_52.
Der volle Inhalt der QuelleChen, Jiahui, Jinda Zhu, Zhiying Qin, Yuejing Zhao, Fuxiang Zhang und Fengshan Huang. „Digital Twin Fault Diagnosis Method for Complex Equipment Transmission Device“. In Innovative Technologies for Printing and Packaging, 412–19. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_51.
Der volle Inhalt der QuelleZhang, Zhuoran, Qiang Wang und Weiyan Zhang. „Research on Evaluation Method of Scanner Imaging Quality“. In Advances in Graphic Communication, Printing and Packaging, 301–8. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_41.
Der volle Inhalt der QuelleShi, Keqiang, Shanhui Liu, Zengqiang Zhang, Song Qian und Han Zhang. „Modeling Method of Guide Roller Manufacturing Information Based on Ontology Modeling“. In Innovative Technologies for Printing and Packaging, 420–24. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_52.
Der volle Inhalt der QuelleKonferenzberichte zum Thema "Printing method"
Nagato, Hitoshi, und Tadayoshi Ohno. „Bidirectional printing method for a thermal ink transfer printer“. In Printing Technologies for Images, Gray Scale, and Color, herausgegeben von Derek B. Dove, Takao Abe und Joachim L. Heinzl. SPIE, 1991. http://dx.doi.org/10.1117/12.46338.
Der volle Inhalt der QuelleShi-hui, Wang, Wang Yi-ming und Wu Shu-qin. „Research on printing registration recognition method“. In 2017 3rd IEEE International Conference on Computer and Communications (ICCC). IEEE, 2017. http://dx.doi.org/10.1109/compcomm.2017.8322917.
Der volle Inhalt der QuelleAli, Md Hazrat, Gaziz Yerbolat und Shynggys Amangeldi. „Material Optimization Method in 3D Printing“. In 2018 IEEE International Conference on Advanced Manufacturing (ICAM). IEEE, 2018. http://dx.doi.org/10.1109/amcon.2018.8614886.
Der volle Inhalt der QuelleHendriko, Hendriko, Prayoga Bagaskara und Dimas Permana. „Development of An Automatic Cup Printing Machine Using a Screen Printing Method“. In Proceedings of the 11th International Applied Business and Engineering Conference, ABEC 2023, September 21st, 2023, Bengkalis, Riau, Indonesia. EAI, 2024. http://dx.doi.org/10.4108/eai.21-9-2023.2342890.
Der volle Inhalt der QuelleInui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka und Toshio Ishikawa. „Magneto-Optical Disk By Contact Printing Method“. In OE/LASE '89, herausgegeben von Gordon R. Knight und Clark N. Kurtz. SPIE, 1989. http://dx.doi.org/10.1117/12.952763.
Der volle Inhalt der QuelleFuruta, Atsuhiro, Kazuki Honjo und Jun Taniguchi. „Fabrication of Flexible Interposer Using Printing Method“. In JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/lemp2020-8524.
Der volle Inhalt der QuelleMoscicki, Andrzej, Tomasz Falat, Anita Smolarek, Andrzej Kinart, Jan Felba und Janusz Borecki. „Interconnection process by ink jet printing method“. In 2012 IEEE 12th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2012. http://dx.doi.org/10.1109/nano.2012.6322108.
Der volle Inhalt der QuelleBo Li, Junbiao Liu, Zhiping Wang und Guangrong Fang. „Graphic printing method for New Braille Printer“. In 2010 IEEE Youth Conference on Information, Computing and Telecommunications (YC-ICT). IEEE, 2010. http://dx.doi.org/10.1109/ycict.2010.5713067.
Der volle Inhalt der QuelleKaplan, Daphna, und Yoav Sterman. „Buildup: FDM Method for Printing Textural Surfaces“. In SCF '23: Symposium on Computational Fabrication. New York, NY, USA: ACM, 2023. http://dx.doi.org/10.1145/3623263.3629156.
Der volle Inhalt der QuelleInui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka und Toshio Ishikawa. „Magneto-Optical Disk by Contact Printing Method“. In Optical Data Storage. Washington, D.C.: Optica Publishing Group, 1989. http://dx.doi.org/10.1364/ods.1989.wd3.
Der volle Inhalt der QuelleBerichte der Organisationen zum Thema "Printing method"
Martens, Niles. The paper stencil method of silk screen printing. Portland State University Library, Januar 2000. http://dx.doi.org/10.15760/etd.701.
Der volle Inhalt der QuelleHerriot, R., T. Hastings und H. Lewis. Internet Printing Protocol (IPP): The 'ippget' Delivery Method for Event Notifications. RFC Editor, März 2005. http://dx.doi.org/10.17487/rfc3996.
Der volle Inhalt der QuelleStrauss, Bernhard, Britta Kleinsorge und Pantea Lotfian. 3D printing technologies in the food system for food production and packaging. Food Standards Agency, März 2023. http://dx.doi.org/10.46756/sci.fsa.suv860.
Der volle Inhalt der QuelleKennedy, Alan, Mark Ballentine, Andrew McQueen, Christopher Griggs, Arit Das und Michael Bortner. Environmental applications of 3D printing polymer composites for dredging operations. Engineer Research and Development Center (U.S.), Januar 2021. http://dx.doi.org/10.21079/11681/39341.
Der volle Inhalt der QuelleWijaya, Ignasius P. A., Eric Kreiger und Asuf Masud. An elastic-inelastic model and embedded bounce-back control for layered printing with cementitious materials. Engineer Research and Development Center (U.S.), Januar 2024. http://dx.doi.org/10.21079/11681/48091.
Der volle Inhalt der QuelleOvalle, Samuel, E. Viamontes und Tony Thomas. Optimization of DLP 3D Printed Ceramic Parts. Florida International University, Oktober 2021. http://dx.doi.org/10.25148/mmeurs.009776.
Der volle Inhalt der QuelleLozynskyi, Maryan. Main Features of Publishing Activities of the Ivan Franko National University of Lviv (end of the 1990s – first two decades of the 21st c.). Ivan Franko National University of Lviv, Februar 2022. http://dx.doi.org/10.30970/vjo.2022.51.11392.
Der volle Inhalt der QuelleDuan, Mengjie, Li Liu, Guillaume Da und Evelyne Géhin. ASSESSING THE RELATIVE IMPORTANCE OF MUCOSAL EXPOSURE AND INHALATION EXPOSURE TO AIRBORNE PARTICLES. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541653952.
Der volle Inhalt der QuelleBallentine, Mark, Alan Kennedy, Nicholas Melby, Andrew McQueen, Christopher Griggs und Ashley Kimble. Approach for on-site, on-demand contaminant-removal devices enabled by low-cost 3D printing. Engineer Research and Development Center (U.S.), März 2024. http://dx.doi.org/10.21079/11681/48353.
Der volle Inhalt der QuelleKennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams und Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), April 2022. http://dx.doi.org/10.21079/11681/43980.
Der volle Inhalt der Quelle