Auswahl der wissenschaftlichen Literatur zum Thema „Polymer sublayer“
Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an
Inhaltsverzeichnis
Machen Sie sich mit den Listen der aktuellen Artikel, Bücher, Dissertationen, Berichten und anderer wissenschaftlichen Quellen zum Thema "Polymer sublayer" bekannt.
Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.
Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.
Zeitschriftenartikel zum Thema "Polymer sublayer"
Makarenkova, Anastasiia, und Inna Starovoit. „INVESTIGATION OF VORTEX FEEDING OF POLYMER INTO THE TURBULENT BOUNDARY LAYER“. Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies, Nr. 1 (01.08.2023): 149–53. http://dx.doi.org/10.20998/2222-0631.2023.01.22.
Der volle Inhalt der QuelleJovanovic, Jovan, Bettina Frohnapfel, Mira Pashtrapanska und Franz Durst. „The effect of polymers on the dynamics of turbulence in a drag reduced flow“. Thermal Science 9, Nr. 1 (2005): 13–41. http://dx.doi.org/10.2298/tsci0501013j.
Der volle Inhalt der QuelleShugurov, A. R., A. I. Kozel’skaya und A. V. Panin. „Viscoelastic wrinkling in compression-stressed metal film-polymer sublayer system“. Technical Physics Letters 37, Nr. 10 (Oktober 2011): 896–99. http://dx.doi.org/10.1134/s1063785011100130.
Der volle Inhalt der QuellePavlovsky, V., und О. Orlov. „Specific features of coordinated variations in friction resistance and flow velocity profile in tubes at Toms effect“. Transactions of the Krylov State Research Centre 3, Nr. 397 (06.08.2021): 25–32. http://dx.doi.org/10.24937/2542-2324-2021-3-397-25-32.
Der volle Inhalt der QuelleMorimoto, Masahiro, Atsuhiro Kusakabe, Kazuya Sakamoto, Junji Gonda und Atsushi Kubono. „Formation of Interfacial Layer between Liquid Crystal and Polymer Alignment Sublayer“. Japanese Journal of Applied Physics 48, Nr. 7 (06.07.2009): 070220. http://dx.doi.org/10.1143/jjap.48.070220.
Der volle Inhalt der QuelleYANG, SHU-QING, und G. DOU. „Turbulent drag reduction with polymer additive in rough pipes“. Journal of Fluid Mechanics 642 (11.12.2009): 279–94. http://dx.doi.org/10.1017/s002211200999187x.
Der volle Inhalt der QuelleSingh, Rashi, und Ashwini Bharati. „Review: Controlled Release of Analgesics“. International Journal for Research in Applied Science and Engineering Technology 11, Nr. 2 (28.02.2023): 654–59. http://dx.doi.org/10.22214/ijraset.2023.49109.
Der volle Inhalt der QuelleJovanović, J., M. Pashtrapanska, B. Frohnapfel, F. Durst, J. Koskinen und K. Koskinen. „On the Mechanism Responsible for Turbulent Drag Reduction by Dilute Addition of High Polymers: Theory, Experiments, Simulations, and Predictions“. Journal of Fluids Engineering 128, Nr. 1 (02.08.2005): 118–30. http://dx.doi.org/10.1115/1.2073227.
Der volle Inhalt der QuelleMorimoto, Masahiro, Yoshio Makino, Junji Gonda, Masahiro Misaki, Kenji Ishida, Yasukiyo Ueda und Atsushi Kubono. „Electrorheological response of the interfacial layer between a liquid crystal and a polymer alignment sublayer“. Thin Solid Films 558 (Mai 2014): 227–30. http://dx.doi.org/10.1016/j.tsf.2014.02.065.
Der volle Inhalt der QuelleKalutskii, V. N., V. G. Shigorin, L. V. Lomova und N. I. Lebedinskaya. „Effect of metallising conditions on structural characteristics of the aluminium sublayer of metallised-polymer coatings“. Welding International 5, Nr. 11 (Januar 1991): 883–84. http://dx.doi.org/10.1080/09507119109446808.
Der volle Inhalt der QuelleDissertationen zum Thema "Polymer sublayer"
Zhang, Teng. „Elaboration and characterization of functionalized hybrid carbon fiber reinforced composites (CFRCs) for innovative applications“. Electronic Thesis or Diss., Bourgogne Franche-Comté, 2024. http://www.theses.fr/2024UBFCA005.
Der volle Inhalt der QuelleCarbon fiber reinforced composites (CFRC) have been successfully developed since decades as efficient and lightweight materials for various innovative applications and mostly for transport applications. Due to the low electrical conductivity of the polymer matrix of CFRCs, a better functionalization of such materials, such as developing a metallic coating on the CFRC structure of an aircraft, brings added values that contribute to a longer life and new performances such as the lightning strike protection (LSP) performance. The major objective of this PhD research program is to improve the metallization of a CFRC substrate by a new approach that focuses on the development of a hybrid layered structure made of CFRC and a biphasic sublayer embedded onto the top surface of this structure, prior to a cold spray metallization. To achieve this objective, the research works rely on an experimental task and a computational analysis which can be divided into three significant contributions:The first experimental part focuses on the development of a biphasic sublayer in between the CFRC substrate and the metal coating. This sublayer consists of a mixture of a polymer (Thermoset Epoxy, Thermoplastic Polymethyl methacrylate) with a micron sized metal powder (Al, Cu). The vacuum assisted resin infusion process is used to produce the hybrid CFRC with the biphasic sublayer on its top face. Prior to the cold spray metallization, the thermo-physical properties of the hybrid CFRCs/biphasic sublayer are characterized using a differential scanning calorimetry (DSC) analysis and a thermal conductivity measurement. The mechanical properties of the hybrid CFRC system are characterized by means of mechanical testing (impact test, tensile test, three-point flexural test, lap-shear adhesion test).The second part of this PhD work investigates the metallization of the hybrid system CFRC/biphasic sublayer using the low-pressure cold spray Dymet 423 system. Copper, aluminum, zinc, and tin powders are used as coating material due to their good electrical and thermal conductivity. Powder mixtures made of these metals and alumina powders (Al2O3) are considered as other potential materials for the cold spray metallization of the biphasic sublayer/CFRC system. An embedment of the cold spray powders onto the biphasic sublayer is found to ease the coating formation, except for the Cu cold spray powder. A continuous 60 μm thick coating of Sn+Al2O3 is obtained onto the biphasic TS-Cu sublayer, that shows the feasibility of surface functionalization of CFRC via a biphasic sublayer and a low-pressure cold spraying.The third part of this PhD work focuses on a phenomenological analysis of the mechanical response of the TS biphasic sublayer during the high-speed collision of the cold spray process. This part aims to depict further improvements through a computational analysis. The erosion issue of the epoxy matrix of the sublayer is found to govern the unsuccessful coating formation onto the thermoset sublayer. Therefore, to find out suitable biphasic polymer materials, a simulation of a Cu powder collision onto thermoplastic media (TP and TP-Cu) has been investigated, that shows a good embedment of the Cu powder onto the TP substrate via a mechanical interlocking (metal-to-resin bonding). The copper particles of the biphasic TP-Cu sublayer enable to promote a plastic deformation of the sprayed Cu particles and is conducive to a bonding formation and coating growth. Finally, to provide a proof of concept, experimental HPCS metallization onto biphasic sublayers made of a TP matrix are performed. A continuous coating formation of spherical Cu, dendritic Cu, and Cu+Al2O3 is obtained onto TP-Cu sublayer, with a thickness of 95 µm, 231 µm, and 114 μm respectively. Thereby, the feasibility of the metallization of CFRC via a TP biphasic sublayer and a high-pressure cold spray deposition has been demonstrated
Konferenzberichte zum Thema "Polymer sublayer"
Zhang, T., E. Padayodi, R. N. Raoelison und J. C. Sagot. „Development of Compatibilizing Sublayer for Metallizing CFRP Structures by Cold Spray“. In ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0893.
Der volle Inhalt der QuelleZhang, T., E. Padyyodi, R. N. Raoelison und J. C. Sagot. „Sublayer-Assisted Cold Spray Metallization of Carbon Fiber Reinforced Composites“. In ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0314.
Der volle Inhalt der QuelleEtebari, Ali, Barbar Akle, Kevin Farinholt, Matthew Bennet, Donald J. Leo und Pavlos P. Vlachos. „The Use of Active Ionic Polymers in Dynamic Skin Friction Measurements“. In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56837.
Der volle Inhalt der QuelleLawn, Brian R. „Failure of Ceramic Coatings on Soft Substrates“. In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2661.
Der volle Inhalt der QuelleCorredor, Fabio Ernesto Rodriguez, Majid Bizhani und Ergun Kuru. „An Experimental Investigation of Turbulent Drag Reduction in Concentric Annulus Using Particle Image Velocimetry Technique“. In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-11408.
Der volle Inhalt der QuelleOrtiz-Villafuerte, Javier, und Yassin A. Hassan. „Investigation of Microbubble Boundary Layer Using Particle Image Velocimetry“. In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45639.
Der volle Inhalt der QuelleBandyopadhyay, Promode R. „Stokes’ Mechanism of Drag Reduction“. In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45340.
Der volle Inhalt der QuelleHerrera, Carlos, Abdul Muqtadir Khan, Abdulrahman Almulhim und Saad Hamid. „A Workflow to Assess the Effect of Lateral Landing, Completion, and Fracturing on Production Potential in an Explorational Clastic Environment“. In Middle East Oil, Gas and Geosciences Show. SPE, 2023. http://dx.doi.org/10.2118/213758-ms.
Der volle Inhalt der QuelleLuo, Yin, Philippe Enkababian, Leah Hrab, Anas Najy, Ahmed Shokry, Ahmed Berrim, Arlen Sarsekov, Andika Sulaiman und Bulat Kamaletdinov. „Diverting from the Status Quo: Leveraging Acid Retardation for Production Enhancement in Offshore Carbonates in UAE“. In SPE Annual Technical Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/206154-ms.
Der volle Inhalt der Quelle