Auswahl der wissenschaftlichen Literatur zum Thema „Overtopping layer thickness“

For the extension of the Rotterdam port in the Netherlands, a novel type of coastal defence structure has been built: a dynamic cobble revetment. During the recent years sand has washed-in between the cobbles altering its hydrodynamic performance. Currently no relations exist that can accurately predict this change in overtopping performance. As physical experiments on a scale large enough to prevent Reynolds (permeability) scale effects are both very costly and time consuming, numerical models are becoming a serious alternative. In this study the influence of a decrease in porosity and related cobble layer thickness on the overtopping performance is studied using a numerical model.Recorded Presentation from the vICCE (YouTube Link): https://youtu.be/TOvuL_fu4eA

The crest elevation of mound breakwaters is usually designed considering a tolerable mean wave overtopping discharge. However, pedestrian safety, characterized by the overtopping layer thickness (OLT) and the overtopping flow velocity (OFV), is becoming more relevant due to the reduction of the crest freeboards of coastal structures. Studies in the literature focusing on OLT and OFV do not consider the bottom slope effect, even if it has a remarkable impact on mound breakwater design under depth-limited breaking wave conditions. Therefore, this research focuses on the influence of the bottom slope on OLT and OFV exceeded by 2% of incoming waves, hc,2% and uc,2%. A total of 235 2D physical tests were conducted on conventional mound breakwaters with a single-layer Cubipod® and double-layer rock and cube armors with 2% and 4% bottom slopes. Neural networks were used to determine the optimum point to estimate wave characteristics for hc,2% and uc,2% calculation; that point was located at a distance from the model toe of three times the water depth at the toe (hs) of the structure. The influence of the bottom slope is studied using trained neural networks with fixed wave conditions in the wave generation zone; hc,2% slightly decreases and uc,2% increases as the gradient of the bottom slope increases.

Abstract Riprap stones are frequently applied to protect rivers and channels against erosion processes. Many empirical equations have been proposed in the past to estimate the unit discharge at the failure circumstance of riprap layers. However, these equations lack general impact due to the limited range of experimental variables. To overcome these shortcomings, support vector machine (SVM), multivariate adaptive regression splines (MARS), and random forest (RF) techniques have been applied in this study to estimate the approach densimetric Froude number at the incipient motion of riprap stones. Riprap stone size, streambank slope, uniformity coefficient of riprap layer stone, specific density of stones, and thickness of riprap layer have been considered as controlling variables. Quantitative performances of the artificial intelligence (AI) models have been assessed by many statistical measures including: coefficient of correlation (R), root mean square error (RMSE), mean absolute error (MAE), and scatter index (SI). Statistical performance of AI models indicated that SVM model with radial basis function (RBF) kernel had better performance (SI = 0.37) than MARS (SI = 0.75) and RF (SI = 0.63) techniques. The proposed AI models performed better than existing empirical equations. From a parametric study the results demonstrated that the erosion-critical stone-referred Froude number (Fs,c) is mainly controlled by the streambank slope.

Balsam fir (Abies balsames (L.) Mill.) seeds dispersed in autumn–winter can be covered by many layers of broadleaves when they germinate under deciduous trees during the following growing season. Our goal was to test the effect of seed density, broadleaf litter thickness, and substrate type on emergence, morphology, and dry mass allocation of balsam fir. The greenhouse experiment included three seeding densities, four litter thicknesses covering the seeds, and two substrate types. The broadleaf mixture was composed of white birch (Betula payrifera Marsh.), trembling aspen (Populus tremuloides Michx.), and pin cherry (Prunus pensylvanica L.f.) collected on the forest floor of a 30-year-old postfire stand. Seed density had no effect on emergence from under broadleaf litter. Emergence was lower on the litter substrate than on potting soil. Seedling emergence and vigor declined as broadleaf thickness increased. Depending on substrate type, emergence was reduced by 20% (leaf litter substrate) to 28% (potting soil) when seeds were covered by 1.4–2.0 cm of broadleaves. An overtopping layer of 2.5–3.0 cm reduced emergence by 57%. Balsam firs emerging from under broadleaf litter allocated more dry mass to longer and thinner hypocotyls at the expense of cotyledon and root growth, albeit seeded on potting soil. This study identifies biomechanical constraints that severely reduce early seedling vigour suggesting that in situ survival under broadleaf litter is very low.

The Northwest Atlantic Mid-Ocean Channel (NAMOC) is one of the largest deep-sea channels of the world's oceans. During the late Cenozoic glacial period, the channel played a major role in the depositional history of the Labrador Sea and northwest Atlantic in controlling sedimentation of a broad (approx. 500 m thick and 200 km wide) lens of turbidites. This sediment sequence interfingers laterally with the acoustically transparent pelagic and contourite facies found in the Labrador Basin. The meandering channel is a depositional–erosional feature formed by submarine mass flows, predominantly turbidity currents.The channel contains a meandering talweg that appears to be associated with a sequence of submarine point bars containing thick-bedded, coarse-grained turbidites and gravel layers (channel-fill facies). Old channel positions on seismic profiles indicate that the channel has migrated laterally up to 30 km both to the west and to the east.Natural levees flank the channel for its entire length, extending laterally into turbidite plains 60–100 km wide. The spill-over facies comprises thin-bedded, fine-grained turbidites dominated by thinly laminated muds. Individual units of parallel-laminated mud, which result from single turbidity currents overtopping the channel banks, average 3 cm in thickness. A layer by layer correlation of a sequence of spill-over turbidites is possible between two adjacent cores 70 km apart. Coarse-grained off-channel sediments recently discovered on both levees at distances up to 55 km from the NAMOC occur in tributary channels.Turbidity current activity in the channel probably started with the onset of glaciation at about mid-Pliocene time and ceased at about 7000 years BP, when deglaciation proceeded rapidly. The sedimentation rate for the last episode of overbank deposition on the levees, which probably occurred between 11 000 and 7000 years BP, is 13 cm/1000 years. Towards the end of glacial episodes the northwestern Labrador Sea was probably covered with sea ice.

[ES] El cambio climático y la conciencia social sobre el impacto de las infraestructuras en el medio está llevando a la necesidad de diseñar diques en talud con cotas de coronación reducidas frente a eventos de rebase más extremos. Además, la mayoría de estos diques se construyen en zonas de profundidades reducidas, donde el oleaje rompe a causa de la limitación por fondo. Estudios recientes apuntan a la necesidad de considerar no sólo la caudal medio de rebase (q) sino también el máximo volumen individual de rebase (Vmax), el espesor de lámina de agua (OLT) y la velocidad del flujo de rebase (OFV) en el diseño de la cota de coronación de un dique en talud según criterios de rebase. No obstante, existen pocos estudios en la literatura científica centrados en Vmax en estructuras costeras sometidas a oleaje limitado por fondo. Además, estos estudios proporcionan resultados contradictorios en relación a la influencia de la limitación por fondo del oleaje sobre Vmax. En cuanto a OLT y OFV, no se han encontrado estudios en la literatura científica que permitan su predicción en diques en talud. En esta tesis doctoral, se han realizado ensayos físicos 2D en diques en talud rebasables (0.3≤Rc/Hm0≤2.5) sin espaldón y con tres mantos principales (Cubípodo®-1L, cubo-2L y escollera-2L) sobre dos pendientes de fondo suaves (m=2% and 4%) en condiciones de oleaje limitado por fondo (0.2≤Hm0/h≤0.9). Vmax junto con q son las variables más recomendadas en la literatura científica para diseñar la cota de coronación de diques en talud según criterios de rebase. En el presente estudio, los mejores resultados en la estimación de Vmax*=Vmax/(gHm0T012) se han obtenido empleando la función de distribución Weibull de dos parámetros con un coeficiente de determinación R2=0.833. Durante la fase de diseño de un dique en talud, es necesario predecir q para calcular Vmax cuando se emplean los métodos dados en la literatura científica. Por tanto, se debe estimar q con fines de diseño si no se dispone de observaciones directas. En caso de emplear la red neuronal CLASH NN para estimar q (R2=0.636), la bondad de ajuste de la función de distribución Weibull de dos parámetros propuesta en esta tesis para predecir Vmax* es R2=0.617. Así, el ratio entre Vmax* medido y estimado cae dentro del rango de 1/2 a 2 (banda de confianza del 90%) cuando se emplea q estimado con CLASH NN. Los nuevos estimadores desarrollados en la presente disertación proporcionan resultados satisfactorios en la predicción de Vmax* con un método más simple que aquellos propuestos en la literatura científica. No se ha encontrado una influencia significativa de la pendiente de fondo ni de la limitación por fondo del oleaje sobre Vmax* en este estudio. OLT y OFV están directamente relacionados con la estabilidad hidráulica de la coronación del dique y la seguridad peatonal frente a rebase. Por tanto, se requiere estimar OLT y OFV en la coronación del dique para diseñar apropiadamente su cota de coronación empleando criterios de rebase. En este estudio, se han empleado redes neuronales para desarrollar nuevos estimadores explícitos que permiten predecir OLT y OFV superados por el 2% del oleaje incidente con un alto coeficiente de determinación (0.866≤R2≤0.867). El número de cifras significativas apropiado para los coeficientes experimentales de dichos estimadores se ha determinado en base a su variabilidad. El punto óptimo en el que las características del oleaje deben ser estimadas para predecir OLT y OFV se ha identificado a una distancia de 3h desde el pie de la estructura (siendo h la profundidad a pie de dique). La pendiente de fondo tiene influencia sobre OLT y OFV. Los valores más extremos de OLT y OFV se han descrito empleando las distribuciones Exponencial de un parámetro y Rayleigh, respectivamente, con resultados satisfactorios (0.803≤R2≤0.812).
[CA] El canvi climàtic i la consciència social sobre l'impacte de les infraestructures al medi està portant a la necessitat de dissenyar dics en talús amb cotes de coronació reduïdes front a esdeveniments d'ultrapassament més extrems. A més, la majoria dels dics es construeixen en zones amb profunditats reduïdes on l'onatge es trenca a causa de la limitació per fons. Estudis recents apunten a la necessitat de considerar no solament el cabal mitjà de sobrepasse (q) sinó també el màxim volum individual de sobrepasse (Vmax), l'espessor de la làmina d'aigua (OLT) i la velocitat del flux de sobrepasse (OFV) pel disseny de la cota de coronació d'un dic en talús segons criteris de sobrepasse. No obstant, existeixen pocs estudis a la literatura científica centrats en Vmax en estructures costeres sotmeses a onatge limitat per fons. Addicionalment, aquests estudis proporcionen resultats contradictoris en relació a la influència de la limitació per fons de l'onatge sobre Vmax. Quant a OLT i OFV, no s'han trobat estudis a la literatura científica que permeten la seua predicció a dics en talús. En aquesta tesi doctoral, s'han realitzat assajos físics 2D amb dics en talús amb sobrepassos rellevants (0.3≤Rc/Hm0≤2.5) sense espatlló i amb tres elements al mantell principal (Cubípode-1L, cubs-2L i esculleres-2L) ubicats sobre pendents de fons suaus (m=2% i 4%) en condicions d'onatge limitat pel fons (0.2≤Hm0/h≤0.9). Vmax conjuntament amb q són les variables més recomanades a la literatura científica per dissenyar la cota de coronació en dics en talús segons criteris d'ultrapassament. Al present estudi, els millors resultats en l'estimació de Vmax*=Vmax/(gHm0T012) s'han obtingut utilitzant la funció de distribució Weibull de dos paràmetres amb un elevat coeficient de determinació R2=0.833. Durant la fase de disseny d'un dic en talús, és necessari predir q per calcular Vmax quan s'utilitzen els mètodes donats a la literatura científica. Per tant, es deu estimar q amb fins de disseny si no es disposa d'observacions directes. Si s'aplica la xarxa neuronal de CLASH NN per estimar q (R2=0.636), la bondat d'ajust de la funció de distribució Weibull de dos paràmetres proposada a aquesta tesi per predir Vmax* és R2=0.617. Així doncs, el ràtio entre el Vmax* mesurat i estimat es troba dins del rang de 1/2 a 2 (banda de confiança del 90%) quan s'usa q predit amb CLASH NN. Els nous estimadors desenvolupats a aquesta dissertació proporcionen resultats satisfactoris en la predicció de Vmax* amb un mètode més senzill que aquells proposats a la literatura científica. No s'ha trobat una influència significativa de la pendent de fons ni de la limitació de l'onatge per fons sobre Vmax* a aquest estudi. OLT i OFV estan directament relacionats amb l'estabilitat hidràulica de la coronació de dics i la seguretat de vianants front a ultrapassaments. Per tant, es requereix estimar OLT i OFV en la coronació de dics per dissenyar apropiadament la seua cota de coronació utilitzant criteris de sobrepasse. En aquest estudi, s'han usat xarxes neuronals per desenvolupar nous estimadors explícits que permeten predir OLT i OFV superats pel 2% de l'onatge incident amb un elevat coeficient de determinació (0.866≤R2≤0.867). El nombre de xifres significatives apropiat per als coeficients experimentals dels mencionats estimadors s'ha determinat basant-se en la seua variabilitat. El punt òptim on determinar les característiques de l'onatge deuen ser estimades per predir OLT i OFV s'ha identificat a una distància de 3h des del peu de l'estructura (on h és la profunditat a peu de dic). La pendent de fons té influència sobre OLT i OFV. Els valors més extrems de OLT i OFV s'han descrit amb les distribucions Exponencial d'un paràmetre i Rayleigh, respectivament, amb resultats satisfactoris (0.803≤R2≤0.812).
[EN] Climate change and the social concern about the impact of infrastructures is leading to mound breakwaters with reduced crest freeboards facing higher extreme overtopping events. In addition, most mound breakwaters are built in the surf zone where depth-limited wave breaking takes place. Recent studies point out the need of considering not only the mean wave overtopping discharge (q) but also the maximum individual wave overtopping volume (Vmax), the overtopping layer thickness (OLT) and the overtopping flow velocity (OFV) when designing mound breakwater crest elevation using overtopping criteria. However, few studies in the literature are focused on Vmax on coastal structures under depth-limited breaking wave conditions. In addition, those few studies report contradictory conclusions regarding the significance of depth-limited breaking waves on Vmax. With respect to OLT and OFV, no studies are found in the literature for their prediction on mound breakwaters. In this PhD thesis, 2D physical model tests were conducted on overtopped mound breakwaters (0.3≤Rc/Hm0≤2.5) without a crown wall armored with three armor layers (Cubipod®-1L, cube-2L and rock-2L) on two gentle bottom slopes (m=2% and 4%) in depth-limited breaking wave conditions (0.2≤Hm0/h≤0.9). Vmax together with q are the most recommended variables in the literature to design mound breakwater crest elevation based on overtopping criteria. In the present study, the 2-parameter Weibull distribution provides the best results when estimating Vmax*=Vmax/(gHm0T012) with coefficient of determination R2=0.833. During the design phase of a mound breakwater, q is needed to predict Vmax using methods given in the literature. Thus, q must be estimated for design purposes when direct observations are not available. If CLASH NN is used to estimate q (R2=0.636), the goodness-of-fit of the 2-parameter Weibull distribution proposed in this thesis to predict Vmax* is R2=0.617. Hence, the ratio between the estimated and measured Vmax* falls within the range 1/2 to 2 (90% error band) when q is predicted using CLASH NN. The new estimators derived in this study provide satisfactory estimations of Vmax* with a method simpler than those found in the literature. Neither the bottom slope nor the depth-induced wave breaking seem to significantly influence the dimensionless Vmax* in this study. OLT and OFV are directly related to the hydraulic stability of the armored crest and the pedestrian safety. Thus, OLT and OFV are required to properly design crest elevation using overtopping criteria. Neural Networks (NNs) are used in this study to develop new explicit unbiased estimators for the OLT and OFV exceeded by 2% of the incoming waves with a high coefficient of determination (0.866≤R2≤0.867). The appropriate number of significant figures of the empirical coefficients of such estimators is selected according to their variability. The optimum point where wave characteristics are determined to predict OLT and OFV was identified at a distance of 3h from the toe of the structure (where h is the water depth at the toe of the structure). The bottom slope does influence both OLT and OFV. The most extreme values of OLT and OFV are described with the 1-parameter Exponential and Rayleigh distribution functions, respectively, with satisfactory results (0.803≤R2≤0.812).
Al Ministerio de Educación, Cultura y Deporte, por la financiación brindada con el programa de Formación de Profesorado Universitario (FPU16/05081). Al Ministerio de Economía y Competitividad, por la financiación de los proyectos ESBECO (EStabilidad hidráulica del manto, BErmas y COronación de diques en talud con rebase y rotura por fondo, BIA2015-70436-R) y HOLOBREAK (Estabilidad Hidráulica y Transmisión de Diques Rompeolas Homogéneos de Baja Cota Diseñados a Rotura por Fondo, RTI2018-101073-B-I00-AR).
Mares Nasarre, P. (2021). Overtopping flow on mound breakwaters under depth-limited breaking wave conditions [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/163154
TESIS

Abstract Overtopping bore impact forces on a dike mounted vertical wall were measured in similar large-scale (Froude length scale factor 1-to-4.3) and small-scale (Froude length scale factor 1-to-25) models. The differences due to scale effects were studied, by comparing the up-scaled force measurements from both models in prototype. It was noted that if a minimum layer thickness, velocity of the overtopping flow and water depth at the dike toe were maintained in the small-scale model, the resulting differences in impact force due to scale effects are within the range of differences due to non-repeatability and model effects.

Wave-Overtopping loads on vertical walls, such as those located on top of a dike, have been investigated in several small-scale experiments in the past. A large-scale validation for a mild foreshore situation is still missing. Hence the WALOWA (WAve LOads on WAlls) experimental campaign was carried out to address this topic. This paper, first presents a description of the large-scale model, the measurement set-up and the experimental methodologies, then it focuses on the layer thicknesses and velocities of the flows created on the promenade by the wave overtopping. A set of resistive wave gauges, ultrasonic distance sensors and velocimeters have been used to conduct these measurements. Preliminary data analysis and results, related to a 1000 irregular waves long test, are discussed. The momentum flux of these flows is studied and its implications, for the wave-overtopping loads acting on the vertical walls, are highlighted.